bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Distinguish serial index from mask (#21287)

Browse Source
This commit is contained in:
X-Ryl669
2021-03-09 10:20:37 +01:00
committed by GitHub
parent 2f1fd4bbaa
commit 55c31fbe9a
14 changed files with 135 additions and 101 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
Marlin/src/gcode/gcode.cpp
View File

@ -1067,7 +1067,7 @@ void GcodeSuite::process_subcommands_now(char * gcode) {
static millis_t next_busy_signal_ms = 0;
if (!autoreport_paused && host_keepalive_interval && busy_state != NOT_BUSY) {
if (PENDING(ms, next_busy_signal_ms)) return;
PORT_REDIRECT(SERIAL_ALL);
PORT_REDIRECT(SerialMask::All);
switch (busy_state) {
case IN_HANDLER:
case IN_PROCESS:

2
Marlin/src/gcode/host/M118.cpp
View File

@ -52,7 +52,7 @@ void GcodeSuite::M118() {
while (*p == ' ') ++p;
}
PORT_REDIRECT(WITHIN(port, 0, NUM_SERIAL) ? (port ? SERIAL_PORTMASK(port - 1) : SERIAL_ALL) : multiSerial.portMask);
PORT_REDIRECT(WITHIN(port, 0, NUM_SERIAL) ? (port ? SERIAL_PORTMASK(port - 1) : SerialMask::All) : multiSerial.portMask);
if (hasE) SERIAL_ECHO_START();
if (hasA) SERIAL_ECHOPGM("//");

14
Marlin/src/gcode/queue.cpp
View File

@ -240,7 +240,7 @@ void GCodeQueue::RingBuffer::ok_to_send() {
CommandLine &command = commands[index_r];
#if HAS_MULTI_SERIAL
const serial_index_t serial_ind = command.port;
if (serial_ind < 0) return;
if (!serial_ind.valid()) return; // Optimization here, skip processing if it's not going anywhere
PORT_REDIRECT(SERIAL_PORTMASK(serial_ind)); // Reply to the serial port that sent the command
#endif
if (command.skip_ok) return;
@ -264,15 +264,15 @@ void GCodeQueue::RingBuffer::ok_to_send() {
*/
void GCodeQueue::flush_and_request_resend(const serial_index_t serial_ind) {
#if HAS_MULTI_SERIAL
if (serial_ind < 0) return; // Never mind. Command came from SD or Flash Drive
if (!serial_ind.valid()) return; // Optimization here, skip if the command came from SD or Flash Drive
PORT_REDIRECT(SERIAL_PORTMASK(serial_ind)); // Reply to the serial port that sent the command
#endif
SERIAL_FLUSH();
SERIAL_ECHOPGM(STR_RESEND);
SERIAL_ECHOLN(serial_state[serial_ind].last_N + 1);
SERIAL_ECHOLN(serial_state[serial_ind.index].last_N + 1);
}
inline bool serial_data_available(uint8_t index) {
inline bool serial_data_available(serial_index_t index) {
const int a = SERIAL_IMPL.available(index);
#if BOTH(RX_BUFFER_MONITOR, RX_BUFFER_SIZE)
if (a > RX_BUFFER_SIZE - 2) {
@ -290,15 +290,15 @@ inline bool any_serial_data_available() {
return true;
}
inline int read_serial(const uint8_t index) { return SERIAL_IMPL.read(index); }
inline int read_serial(const serial_index_t index) { return SERIAL_IMPL.read(index); }
void GCodeQueue::gcode_line_error(PGM_P const err, const serial_index_t serial_ind) {
PORT_REDIRECT(SERIAL_PORTMASK(serial_ind)); // Reply to the serial port that sent the command
SERIAL_ERROR_START();
SERIAL_ECHOLNPAIR_P(err, serial_state[serial_ind].last_N);
SERIAL_ECHOLNPAIR_P(err, serial_state[serial_ind.index].last_N);
while (read_serial(serial_ind) != -1) { /* nada */ } // Clear out the RX buffer. Why don't use flush here ?
flush_and_request_resend(serial_ind);
serial_state[serial_ind].count = 0;
serial_state[serial_ind.index].count = 0;
}
FORCE_INLINE bool is_M29(const char * const cmd) { // matches "M29" & "M29 ", but not "M290", etc

6
Marlin/src/gcode/queue.h
View File

@ -79,13 +79,13 @@ public:
void commit_command(bool skip_ok
#if HAS_MULTI_SERIAL
, serial_index_t serial_ind=-1
, serial_index_t serial_ind = serial_index_t()
#endif
);
bool enqueue(const char* cmd, bool skip_ok = true
#if HAS_MULTI_SERIAL
, serial_index_t serial_ind=-1
, serial_index_t serial_ind = serial_index_t()
#endif
);
@ -197,7 +197,7 @@ public:
/**
* (Re)Set the current line number for the last received command
*/
static inline void set_current_line_number(long n) { serial_state[ring_buffer.command_port()].last_N = n; }
static inline void set_current_line_number(long n) { serial_state[ring_buffer.command_port().index].last_N = n; }
private:

2
Marlin/src/gcode/sd/M1001.cpp
View File

@ -82,7 +82,7 @@ void GcodeSuite::M1001() {
// Announce SD file completion
{
PORT_REDIRECT(SERIAL_ALL);
PORT_REDIRECT(SerialMask::All);
SERIAL_ECHOLNPGM(STR_FILE_PRINTED);
}