bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Revert experimental NAN patch

Browse Source 
Hold changes from #21575 (24a095c) for more testing.
This commit is contained in:
Scott Lahteine
2021-04-16 02:43:59 -05:00
parent 32dba5e0c7
commit 528b9bd872
31 changed files with 104 additions and 109 deletions
Download Patch File Download Diff File Expand all files Collapse all files

22
Marlin/src/gcode/bedlevel/abl/G29.cpp
View File

@ -288,11 +288,11 @@ G29_TYPE GcodeSuite::G29() {
G29_RETURN(false);
}
const float rx = RAW_X_POSITION(parser.linearval('X', MFNAN)),
ry = RAW_Y_POSITION(parser.linearval('Y', MFNAN));
const float rx = RAW_X_POSITION(parser.linearval('X', NAN)),
ry = RAW_Y_POSITION(parser.linearval('Y', NAN));
int8_t i = parser.byteval('I', -1), j = parser.byteval('J', -1);
if (!ISNAN(rx) && !ISNAN(ry)) {
if (!isnan(rx) && !isnan(ry)) {
// Get nearest i / j from rx / ry
i = (rx - bilinear_start.x + 0.5 * abl.gridSpacing.x) / abl.gridSpacing.x;
j = (ry - bilinear_start.y + 0.5 * abl.gridSpacing.y) / abl.gridSpacing.y;
@ -609,7 +609,7 @@ G29_TYPE GcodeSuite::G29() {
// Outer loop is X with PROBE_Y_FIRST enabled
// Outer loop is Y with PROBE_Y_FIRST disabled
for (PR_OUTER_VAR = 0; PR_OUTER_VAR < PR_OUTER_SIZE && !ISNAN(abl.measured_z); PR_OUTER_VAR++) {
for (PR_OUTER_VAR = 0; PR_OUTER_VAR < PR_OUTER_SIZE && !isnan(abl.measured_z); PR_OUTER_VAR++) {
int8_t inStart, inStop, inInc;
@ -645,7 +645,7 @@ G29_TYPE GcodeSuite::G29() {
abl.measured_z = faux ? 0.001f * random(-100, 101) : probe.probe_at_point(abl.probePos, raise_after, abl.verbose_level);
if (ISNAN(abl.measured_z)) {
if (isnan(abl.measured_z)) {
set_bed_leveling_enabled(abl.reenable);
break; // Breaks out of both loops
}
@ -691,14 +691,14 @@ G29_TYPE GcodeSuite::G29() {
// Retain the last probe position
abl.probePos = points[i];
abl.measured_z = faux ? 0.001 * random(-100, 101) : probe.probe_at_point(abl.probePos, raise_after, abl.verbose_level);
if (ISNAN(abl.measured_z)) {
if (isnan(abl.measured_z)) {
set_bed_leveling_enabled(abl.reenable);
break;
}
points[i].z = abl.measured_z;
}
if (!abl.dryrun && !ISNAN(abl.measured_z)) {
if (!abl.dryrun && !isnan(abl.measured_z)) {
vector_3 planeNormal = vector_3::cross(points[0] - points[1], points[2] - points[1]).get_normal();
if (planeNormal.z < 0) planeNormal *= -1;
planner.bed_level_matrix = matrix_3x3::create_look_at(planeNormal);
@ -714,7 +714,7 @@ G29_TYPE GcodeSuite::G29() {
// Stow the probe. No raise for FIX_MOUNTED_PROBE.
if (probe.stow()) {
set_bed_leveling_enabled(abl.reenable);
abl.measured_z = MFNAN;
abl.measured_z = NAN;
}
}
#endif // !PROBE_MANUALLY
@ -737,7 +737,7 @@ G29_TYPE GcodeSuite::G29() {
#endif
// Calculate leveling, print reports, correct the position
if (!ISNAN(abl.measured_z)) {
if (!isnan(abl.measured_z)) {
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
if (!abl.dryrun) extrapolate_unprobed_bed_level();
@ -874,7 +874,7 @@ G29_TYPE GcodeSuite::G29() {
// Auto Bed Leveling is complete! Enable if possible.
planner.leveling_active = !abl.dryrun || abl.reenable;
} // !ISNAN(abl.measured_z)
} // !isnan(abl.measured_z)
// Restore state after probing
if (!faux) restore_feedrate_and_scaling();
@ -900,7 +900,7 @@ G29_TYPE GcodeSuite::G29() {
TERN_(FULL_REPORT_TO_HOST_FEATURE, set_and_report_grblstate(M_IDLE));
G29_RETURN(ISNAN(abl.measured_z));
G29_RETURN(isnan(abl.measured_z));
}
#endif // HAS_ABL_NOT_UBL