🎨 Some automated cleanup

This commit is contained in:
Scott Lahteine 2022-08-20 06:41:00 -05:00
parent bdd5f3678e
commit 5145266b0d
24 changed files with 158 additions and 158 deletions

View File

@ -51,7 +51,7 @@ enum XPTCoordinate : uint8_t {
XPT2046_Z2 = 0x40 | XPT2046_CONTROL | XPT2046_DFR_MODE,
};
#if !defined(XPT2046_Z1_THRESHOLD)
#ifndef XPT2046_Z1_THRESHOLD
#define XPT2046_Z1_THRESHOLD 10
#endif

View File

@ -147,7 +147,7 @@ uint32_t TFT_FSMC::ReadID(tft_data_t Reg) {
}
bool TFT_FSMC::isBusy() {
#if defined(STM32F1xx)
#ifdef STM32F1xx
volatile bool dmaEnabled = (DMAtx.Instance->CCR & DMA_CCR_EN) != RESET;
#elif defined(STM32F4xx)
volatile bool dmaEnabled = DMAtx.Instance->CR & DMA_SxCR_EN;

View File

@ -179,7 +179,7 @@ uint32_t TFT_SPI::ReadID(uint16_t Reg) {
}
bool TFT_SPI::isBusy() {
#if defined(STM32F1xx)
#ifdef STM32F1xx
volatile bool dmaEnabled = (DMAtx.Instance->CCR & DMA_CCR_EN) != RESET;
#elif defined(STM32F4xx)
volatile bool dmaEnabled = DMAtx.Instance->CR & DMA_SxCR_EN;

View File

@ -21,7 +21,7 @@
*/
#pragma once
#if !defined(__has_include)
#ifndef __has_include
#define __has_include(...) 1
#endif

View File

@ -2276,7 +2276,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
* Redundant temperature sensor config
*/
#if HAS_TEMP_REDUNDANT
#if !defined(TEMP_SENSOR_REDUNDANT_SOURCE)
#ifndef TEMP_SENSOR_REDUNDANT_SOURCE
#error "TEMP_SENSOR_REDUNDANT requires TEMP_SENSOR_REDUNDANT_SOURCE."
#elif !defined(TEMP_SENSOR_REDUNDANT_TARGET)
#error "TEMP_SENSOR_REDUNDANT requires TEMP_SENSOR_REDUNDANT_TARGET."
@ -2984,7 +2984,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#endif
#if ENABLED(ANYCUBIC_LCD_CHIRON)
#if !defined(BEEPER_PIN)
#ifndef BEEPER_PIN
#error "ANYCUBIC_LCD_CHIRON requires BEEPER_PIN"
#elif DISABLED(SDSUPPORT)
#error "ANYCUBIC_LCD_CHIRON requires SDSUPPORT"

View File

@ -97,7 +97,7 @@
#elif defined(TOUCH_UI_800x480)
namespace FTDI {
#if defined(TOUCH_UI_800x480_GENERIC)
#ifdef TOUCH_UI_800x480_GENERIC
constexpr uint8_t Pclk = 2;
constexpr uint16_t Hsize = 800;
constexpr uint16_t Vsize = 480;

View File

@ -100,11 +100,11 @@ extern "C" {
* This value is used by the RCC HAL module to compute the system frequency
* (when HSE is used as system clock source, directly or through the PLL).
*/
#if !defined (HSE_VALUE)
#ifndef HSE_VALUE
#define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */
#endif /* HSE_VALUE */
#if !defined (HSE_STARTUP_TIMEOUT)
#ifndef HSE_STARTUP_TIMEOUT
#define HSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSE start up, in ms */
#endif /* HSE_STARTUP_TIMEOUT */
@ -112,7 +112,7 @@ extern "C" {
* @brief Internal oscillator (CSI) default value.
* This value is the default CSI value after Reset.
*/
#if !defined (CSI_VALUE)
#ifndef CSI_VALUE
#define CSI_VALUE ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/
#endif /* CSI_VALUE */
@ -121,7 +121,7 @@ extern "C" {
* This value is used by the RCC HAL module to compute the system frequency
* (when HSI is used as system clock source, directly or through the PLL).
*/
#if !defined (HSI_VALUE)
#ifndef HSI_VALUE
#define HSI_VALUE ((uint32_t)64000000) /*!< Value of the Internal oscillator in Hz*/
#endif /* HSI_VALUE */
@ -129,16 +129,16 @@ extern "C" {
* @brief External Low Speed oscillator (LSE) value.
* This value is used by the UART, RTC HAL module to compute the system frequency
*/
#if !defined (LSE_VALUE)
#ifndef LSE_VALUE
#define LSE_VALUE ((uint32_t)32768) /*!< Value of the External oscillator in Hz*/
#endif /* LSE_VALUE */
#if !defined (LSE_STARTUP_TIMEOUT)
#ifndef LSE_STARTUP_TIMEOUT
#define LSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for LSE start up, in ms */
#endif /* LSE_STARTUP_TIMEOUT */
#if !defined (LSI_VALUE)
#ifndef LSI_VALUE
#define LSI_VALUE ((uint32_t)32000) /*!< LSI Typical Value in Hz*/
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
The real value may vary depending on the variations
@ -148,7 +148,7 @@ in voltage and temperature.*/
* This value is used by the I2S HAL module to compute the I2S clock source
* frequency, this source is inserted directly through I2S_CKIN pad.
*/
#if !defined (EXTERNAL_CLOCK_VALUE)
#ifndef EXTERNAL_CLOCK_VALUE
#define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the External clock in Hz*/
#endif /* EXTERNAL_CLOCK_VALUE */

View File

@ -136,7 +136,7 @@ WEAK const PinMap PinMap_PWM[] = {
#endif
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 0)}, // TIM2_CH3
// {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_1, 3, 0)}, // TIM2_CH3
#if defined(STM32F103xG)
#ifdef STM32F103xG
// {PA_2, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 0)}, // TIM5_CH3
#endif
#if defined(STM32F103xE) || defined(STM32F103xG)
@ -148,11 +148,11 @@ WEAK const PinMap PinMap_PWM[] = {
#else
{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 4, 0)}, // TIM2_CH4
#endif
#if defined(STM32F103xG)
#ifdef STM32F103xG
// {PA_3, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM9_CH2
#endif
{PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM3_CH1
#if defined(STM32F103xG)
#ifdef STM32F103xG
// {PA_6, TIM13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM13_CH1
#endif
// {PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM3_CH2
@ -161,7 +161,7 @@ WEAK const PinMap PinMap_PWM[] = {
#else
{PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 1, 1)}, // TIM1_CH1N
#endif
#if defined(STM32F103xG)
#ifdef STM32F103xG
// {PA_7, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM14_CH1
#endif
{PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM1_CH1
@ -196,10 +196,10 @@ WEAK const PinMap PinMap_PWM[] = {
{PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 0)}, // TIM4_CH3
{PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 4, 0)}, // TIM4_CH4
#endif
#if defined(STM32F103xG)
#ifdef STM32F103xG
// {PB_8, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM10_CH1
#endif
#if defined(STM32F103xG)
#ifdef STM32F103xG
// {PB_9, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM11_CH1
#endif
{PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_2, 3, 0)}, // TIM2_CH3
@ -208,11 +208,11 @@ WEAK const PinMap PinMap_PWM[] = {
// {PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_ENABLE, 4, 0)}, // TIM2_CH4
{PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 1)}, // TIM1_CH1N
{PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 1)}, // TIM1_CH2N
#if defined(STM32F103xG)
#ifdef STM32F103xG
// {PB_14, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM12_CH1
#endif
{PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 1)}, // TIM1_CH3N
#if defined(STM32F103xG)
#ifdef STM32F103xG
// {PB_15, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM12_CH2
#endif
{PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_ENABLE, 1, 0)}, // TIM3_CH1
@ -249,7 +249,7 @@ WEAK const PinMap PinMap_UART_TX[] = {
#if defined(STM32F103xE) || defined(STM32F103xG)
{PC_10, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
#endif
#if defined(STM32F103xB)
#ifdef STM32F103xB
{PC_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_USART3_PARTIAL)},
#endif
#if defined(STM32F103xE) || defined(STM32F103xG)
@ -270,7 +270,7 @@ WEAK const PinMap PinMap_UART_RX[] = {
#if defined(STM32F103xE) || defined(STM32F103xG)
{PC_11, UART4, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, AFIO_NONE)},
#endif
#if defined(STM32F103xB)
#ifdef STM32F103xB
{PC_11, USART3, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, AFIO_USART3_PARTIAL)},
#endif
#if defined(STM32F103xE) || defined(STM32F103xG)

View File

@ -171,7 +171,7 @@ extern "C" {
* Activated: CRC code is present inside driver
* Deactivated: CRC code cleaned from driver
*/
#if !defined(USE_SPI_CRC)
#ifndef USE_SPI_CRC
#define USE_SPI_CRC 0
#endif

View File

@ -139,7 +139,7 @@ extern "C" {
#define PIN_SERIAL2_TX PA2
// Extra HAL modules
#if defined(STM32F103xE)
#ifdef STM32F103xE
//#define HAL_DAC_MODULE_ENABLED (unused or maybe for the eeprom write?)
#define HAL_SD_MODULE_ENABLED
#define HAL_SRAM_MODULE_ENABLED

View File

@ -143,17 +143,17 @@ WEAK const PinMap PinMap_PWM[] = {
#else
{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 4, 0)}, // TIM2_CH4
#endif
#if defined(STM32F103xG)
#ifdef STM32F103xG
//{PA_3, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM9_CH2
#endif
{PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM3_CH1
#if defined(STM32F103xG)
#ifdef STM32F103xG
//{PA_6, TIM13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM13_CH1
#endif
{PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 1, 1)}, // TIM1_CH1N
//{PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM3_CH2
//{PA_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 1)}, // TIM8_CH1N
#if defined(STM32F103xG)
#ifdef STM32F103xG
//{PA_7, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM14_CH1
#endif
{PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM1_CH1
@ -185,11 +185,11 @@ WEAK const PinMap PinMap_PWM[] = {
{PB_6, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM4_CH1
{PB_7, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM4_CH2
{PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 0)}, // TIM4_CH3
#if defined(STM32F103xG)
#ifdef STM32F103xG
//{PB_8, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM10_CH1
#endif
{PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 4, 0)}, // TIM4_CH4
#if defined(STM32F103xG)
#ifdef STM32F103xG
//{PB_9, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM11_CH1
#endif
{PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_2, 3, 0)}, // TIM2_CH3
@ -198,11 +198,11 @@ WEAK const PinMap PinMap_PWM[] = {
//{PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_ENABLE, 4, 0)}, // TIM2_CH4
{PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 1)}, // TIM1_CH1N
{PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 1)}, // TIM1_CH2N
#if defined(STM32F103xG)
#ifdef STM32F103xG
//{PB_14, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM12_CH1
#endif
{PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 1)}, // TIM1_CH3N
#if defined(STM32F103xG)
#ifdef STM32F103xG
//{PB_15, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM12_CH2
#endif
{PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_ENABLE, 1, 0)}, // TIM3_CH1
@ -223,7 +223,7 @@ WEAK const PinMap PinMap_PWM[] = {
{PD_13, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM4_ENABLE, 2, 0)}, // TIM4_CH2
{PD_14, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM4_ENABLE, 3, 0)}, // TIM4_CH3
{PD_15, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM4_ENABLE, 4, 0)}, // TIM4_CH4
#if defined(STM32F103xG)
#ifdef STM32F103xG
{PE_5, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM9_ENABLE, 1, 0)}, // TIM9_CH1
{PE_6, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM9_ENABLE, 2, 0)}, // TIM9_CH2
#endif

View File

@ -81,15 +81,15 @@ extern "C" {
* This value is used by the RCC HAL module to compute the system frequency
* (when HSE is used as system clock source, directly or through the PLL).
*/
#if !defined (HSE_VALUE)
#if defined(USE_STM3210C_EVAL)
#ifndef HSE_VALUE
#ifdef USE_STM3210C_EVAL
#define HSE_VALUE 25000000U /*!< Value of the External oscillator in Hz */
#else
#define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */
#endif
#endif /* HSE_VALUE */
#if !defined (HSE_STARTUP_TIMEOUT)
#ifndef HSE_STARTUP_TIMEOUT
#define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */
#endif /* HSE_STARTUP_TIMEOUT */
@ -98,14 +98,14 @@ extern "C" {
* This value is used by the RCC HAL module to compute the system frequency
* (when HSI is used as system clock source, directly or through the PLL).
*/
#if !defined (HSI_VALUE)
#ifndef HSI_VALUE
#define HSI_VALUE 8000000U /*!< Value of the Internal oscillator in Hz */
#endif /* HSI_VALUE */
/**
* @brief Internal Low Speed oscillator (LSI) value.
*/
#if !defined (LSI_VALUE)
#ifndef LSI_VALUE
#define LSI_VALUE 40000U /*!< LSI Typical Value in Hz */
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
The real value may vary depending on the variations
@ -114,11 +114,11 @@ extern "C" {
* @brief External Low Speed oscillator (LSE) value.
* This value is used by the UART, RTC HAL module to compute the system frequency
*/
#if !defined (LSE_VALUE)
#ifndef LSE_VALUE
#define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */
#endif /* LSE_VALUE */
#if !defined (LSE_STARTUP_TIMEOUT)
#ifndef LSE_STARTUP_TIMEOUT
#define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */
#endif /* LSE_STARTUP_TIMEOUT */
@ -129,7 +129,7 @@ extern "C" {
/**
* @brief This is the HAL system configuration section
*/
#if !defined(VDD_VALUE)
#ifndef VDD_VALUE
#define VDD_VALUE 3300U /*!< Value of VDD in mv */
#endif
#if !defined (TICK_INT_PRIORITY)

View File

@ -91,11 +91,11 @@
* This value is used by the RCC HAL module to compute the system frequency
* (when HSE is used as system clock source, directly or through the PLL).
*/
#if !defined (HSE_VALUE)
#ifndef HSE_VALUE
#define HSE_VALUE 25000000U /*!< Value of the External oscillator in Hz */
#endif /* HSE_VALUE */
#if !defined (HSE_STARTUP_TIMEOUT)
#ifndef HSE_STARTUP_TIMEOUT
#define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */
#endif /* HSE_STARTUP_TIMEOUT */
@ -104,14 +104,14 @@
* This value is used by the RCC HAL module to compute the system frequency
* (when HSI is used as system clock source, directly or through the PLL).
*/
#if !defined (HSI_VALUE)
#ifndef HSI_VALUE
#define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz */
#endif /* HSI_VALUE */
/**
* @brief Internal Low Speed oscillator (LSI) value.
*/
#if !defined (LSI_VALUE)
#ifndef LSI_VALUE
#define LSI_VALUE 32000U /*!< LSI Typical Value in Hz */
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
The real value may vary depending on the variations
@ -119,11 +119,11 @@
/**
* @brief External Low Speed oscillator (LSE) value.
*/
#if !defined (LSE_VALUE)
#ifndef LSE_VALUE
#define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */
#endif /* LSE_VALUE */
#if !defined (LSE_STARTUP_TIMEOUT)
#ifndef LSE_STARTUP_TIMEOUT
#define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */
#endif /* LSE_STARTUP_TIMEOUT */
@ -132,7 +132,7 @@
* This value is used by the I2S HAL module to compute the I2S clock source
* frequency, this source is inserted directly through I2S_CKIN pad.
*/
#if !defined (EXTERNAL_CLOCK_VALUE)
#ifndef EXTERNAL_CLOCK_VALUE
#define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the External oscillator in Hz*/
#endif /* EXTERNAL_CLOCK_VALUE */

View File

@ -15,7 +15,7 @@
* STM32G0C1R(C-E)IxN.xml, STM32G0C1R(C-E)TxN.xml
* CubeMX DB release 6.0.30
*/
#if !defined(CUSTOM_PERIPHERAL_PINS)
#ifndef CUSTOM_PERIPHERAL_PINS
#include "Arduino.h"
#include "PeripheralPins.h"

View File

@ -11,7 +11,7 @@
*******************************************************************************
*/
#if defined(STM32G0B1xx)
#ifdef STM32G0B1xx
#include "pins_arduino.h"
// Digital PinName array

View File

@ -17,7 +17,7 @@
* STM32H753VIHx.xml, STM32H753VITx.xml
* CubeMX DB release 6.0.30
*/
#if !defined(CUSTOM_PERIPHERAL_PINS)
#ifndef CUSTOM_PERIPHERAL_PINS
#include "Arduino.h"
#include "PeripheralPins.h"

View File

@ -10,7 +10,7 @@
*
*******************************************************************************
*/
#if defined(STM32H743xx)
#ifdef STM32H743xx
#include "pins_arduino.h"
// Digital PinName array

View File

@ -226,16 +226,16 @@
#endif
// Extra HAL modules
#if !defined(HAL_DAC_MODULE_DISABLED)
#ifndef HAL_DAC_MODULE_DISABLED
#define HAL_DAC_MODULE_ENABLED
#endif
#if !defined(HAL_ETH_MODULE_DISABLED)
#ifndef HAL_ETH_MODULE_DISABLED
#define HAL_ETH_MODULE_ENABLED
#endif
#if !defined(HAL_QSPI_MODULE_DISABLED)
#ifndef HAL_QSPI_MODULE_DISABLED
#define HAL_QSPI_MODULE_ENABLED
#endif
#if !defined(HAL_SD_MODULE_DISABLED)
#ifndef HAL_SD_MODULE_DISABLED
#define HAL_SD_MODULE_ENABLED
#endif

View File

@ -91,11 +91,11 @@
* This value is used by the RCC HAL module to compute the system frequency
* (when HSE is used as system clock source, directly or through the PLL).
*/
#if !defined (HSE_VALUE)
#ifndef HSE_VALUE
#define HSE_VALUE 25000000U /*!< Value of the External oscillator in Hz */
#endif /* HSE_VALUE */
#if !defined (HSE_STARTUP_TIMEOUT)
#ifndef HSE_STARTUP_TIMEOUT
#define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */
#endif /* HSE_STARTUP_TIMEOUT */
@ -104,14 +104,14 @@
* This value is used by the RCC HAL module to compute the system frequency
* (when HSI is used as system clock source, directly or through the PLL).
*/
#if !defined (HSI_VALUE)
#ifndef HSI_VALUE
#define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz */
#endif /* HSI_VALUE */
/**
* @brief Internal Low Speed oscillator (LSI) value.
*/
#if !defined (LSI_VALUE)
#ifndef LSI_VALUE
#define LSI_VALUE 32000U /*!< LSI Typical Value in Hz */
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
The real value may vary depending on the variations
@ -119,11 +119,11 @@
/**
* @brief External Low Speed oscillator (LSE) value.
*/
#if !defined (LSE_VALUE)
#ifndef LSE_VALUE
#define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */
#endif /* LSE_VALUE */
#if !defined (LSE_STARTUP_TIMEOUT)
#ifndef LSE_STARTUP_TIMEOUT
#define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */
#endif /* LSE_STARTUP_TIMEOUT */
@ -132,7 +132,7 @@
* This value is used by the I2S HAL module to compute the I2S clock source
* frequency, this source is inserted directly through I2S_CKIN pad.
*/
#if !defined (EXTERNAL_CLOCK_VALUE)
#ifndef EXTERNAL_CLOCK_VALUE
#define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the External oscillator in Hz*/
#endif /* EXTERNAL_CLOCK_VALUE */

View File

@ -144,7 +144,7 @@ static void setup_clocks(void) {
* present. If no bootloader is present, the user NVIC usually starts
* at the Flash base address, 0x08000000.
*/
#if defined(BOOTLOADER_maple)
#ifdef BOOTLOADER_maple
#define USER_ADDR_ROM 0x08005000
#else
#define USER_ADDR_ROM 0x08000000

View File

@ -144,7 +144,7 @@ static void setup_clocks(void) {
* present. If no bootloader is present, the user NVIC usually starts
* at the Flash base address, 0x08000000.
*/
#if defined(BOOTLOADER_maple)
#ifdef BOOTLOADER_maple
#define USER_ADDR_ROM 0x08002000
#else
#define USER_ADDR_ROM 0x08000000