Prusa => Průša

Marlin/Configuration.h

@@ -177,7 +177,7 @@
 #endif
 
 /**
- * Prusa Multi-Material Unit v2
+ * Průša Multi-Material Unit v2
  *
  * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails.
  * Requires EXTRUDERS = 5
@@ -373,7 +373,7 @@
  *     4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
  *     5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
  *   501 : 100K Zonestar (Tronxy X3A) Thermistor
- *   502 : 100K Zonestar Thermistor used by hot bed in Zonestar Prusa P802M
+ *   502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
  *   512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
  *     6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
  *     7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
@@ -1720,9 +1720,9 @@
 #define DISPLAY_CHARSET_HD44780 JAPANESE
 
 /**
- * Info Screen Style (0:Classic, 1:Prusa)
+ * Info Screen Style (0:Classic, 1:Průša)
  *
- * :[0:'Classic', 1:'Prusa']
+ * :[0:'Classic', 1:'Průša']
  */
 #define LCD_INFO_SCREEN_STYLE 0
 

Marlin/Configuration_adv.h

@@ -2424,7 +2424,7 @@
    * CHOPPER_DEFAULT_24V
    * CHOPPER_DEFAULT_36V
    * CHOPPER_09STEP_24V   // 0.9 degree steppers (24V)
-   * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+   * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
    * Define you own with
@@ -3396,7 +3396,7 @@
 #endif
 
 /**
- * Prusa Multi-Material Unit v2
+ * Průša Multi-Material Unit v2
  * Enable in Configuration.h
  */
 #if ENABLED(PRUSA_MMU2)
@@ -3420,7 +3420,7 @@
   //#define MMU2_MENUS
   #if ENABLED(MMU2_MENUS)
     // Settings for filament load / unload from the LCD menu.
-    // This is for Prusa MK3-style extruders. Customize for your hardware.
+    // This is for Průša MK3-style extruders. Customize for your hardware.
     #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0
     #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \
       {  7.2, 1145 }, \
@@ -3446,7 +3446,7 @@
   /**
    * MMU Extruder Sensor
    *
-   * Support for a Prusa (or other) IR Sensor to detect filament near the extruder
+   * Support for a Průša (or other) IR Sensor to detect filament near the extruder
    * and make loading more reliable. Suitable for an extruder equipped with a filament
    * sensor less than 38mm from the gears.
    *

Marlin/src/MarlinCore.cpp

@@ -684,7 +684,7 @@ inline void manage_inactivity(const bool ignore_stepper_queue=false) {
  *  - Read Buttons and Update the LCD
  *  - Run i2c Position Encoders
  *  - Auto-report Temperatures / SD Status
- *  - Update the Prusa MMU2
+ *  - Update the Průša MMU2
  *  - Handle Joystick jogging
  */
 void idle(TERN_(ADVANCED_PAUSE_FEATURE, bool no_stepper_sleep/*=false*/)) {
@@ -760,7 +760,7 @@ void idle(TERN_(ADVANCED_PAUSE_FEATURE, bool no_stepper_sleep/*=false*/)) {
     }
   #endif
 
-  // Update the Prusa MMU2
+  // Update the Průša MMU2
   TERN_(PRUSA_MMU2, mmu2.mmu_loop());
 
   // Handle Joystick jogging

Marlin/src/gcode/calibrate/G76_M871.cpp

@@ -45,7 +45,7 @@
  *  - When calibrating bed, probe temperature is held constant.
  *    Compensation values are deltas to first probe measurement at bed temp. = 60°C.
  *  - The hotend will not be heated at any time.
- *  - On my Prusa MK3S clone I put a piece of paper between the probe and the hotend
+ *  - On my Průša MK3S clone I put a piece of paper between the probe and the hotend
  *    so the hotend fan would not cool my probe constantly. Alternativly you could just
  *    make sure the fan is not running while running the calibration process.
  *

Marlin/src/inc/Conditionals_LCD.h

@@ -512,7 +512,7 @@
   #undef DISABLE_INACTIVE_EXTRUDER
 #endif
 
-// Prusa MK2 Multiplexer and MMU 2.0 force SINGLENOZZLE
+// Průša MK2 Multiplexer and MMU 2.0 force SINGLENOZZLE
 #if EITHER(MK2_MULTIPLEXER, PRUSA_MMU2)
   #define SINGLENOZZLE
 #endif

Marlin/src/inc/SanityCheck.h

@@ -2876,7 +2876,7 @@ static_assert(   _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
 #endif
 
 /**
- * Prusa MMU2 requirements
+ * Průša MMU2 requirements
  */
 #if ENABLED(PRUSA_MMU2)
   #if EXTRUDERS != 5

Marlin/src/module/thermistor/thermistors.h

@@ -72,7 +72,7 @@ typedef struct { int16_t value, celsius; } temp_entry_t;
 #if ANY_THERMISTOR_IS(501) // 100K Zonestar thermistor
   #include "thermistor_501.h"
 #endif
-#if ANY_THERMISTOR_IS(502) // Unknown thermistor used by the Zonestar Prusa P802M hot bed
+#if ANY_THERMISTOR_IS(502) // Unknown thermistor used by the Zonestar Průša P802M hot bed
   #include "thermistor_502.h"
 #endif
 #if ANY_THERMISTOR_IS(512) // 100k thermistor in RPW-Ultra hotend, Pull-up = 4.7 kOhm, "unknown model"

Marlin/src/pins/stm32f4/pins_LERDGE_S.h

@@ -127,7 +127,7 @@
 #endif
 
 //
-// Prusa i3 MK2 Multi Material Multiplexer Support
+// Průša i3 MK2 Multi Material Multiplexer Support
 //
 //#define E_MUX0_PIN                        -1
 //#define E_MUX1_PIN                        -1

Marlin/src/pins/stm32f4/pins_VAKE403D.h

@@ -147,7 +147,7 @@
 //#define NEOPIXEL_PIN                      PF13
 
 //
-// Prusa i3 MK2 Multi Material Multiplexer Support
+// Průša i3 MK2 Multi Material Multiplexer Support
 //
 //#define E_MUX0_PIN                        PG3
 //#define E_MUX1_PIN                        PG4