Merge pull request #9470 from thinkyhead/bf2_malyan_clueless
[2.0.x] Malyan M200 LCD
This commit is contained in:
commit
4ddb6a3a1f
@ -1554,6 +1554,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1554,6 +1554,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1574,6 +1574,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1554,6 +1554,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1704,6 +1704,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1563,6 +1563,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1554,6 +1554,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1539,6 +1539,12 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1542,6 +1542,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1555,6 +1555,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1542,6 +1542,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1553,6 +1553,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1564,6 +1564,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1540,6 +1540,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1543,6 +1543,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1536,6 +1536,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1536,6 +1536,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1560,6 +1560,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1569,6 +1569,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1554,6 +1554,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1558,6 +1558,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1565,6 +1565,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1561,6 +1561,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -21,7 +21,7 @@
|
||||
*/
|
||||
|
||||
/**
|
||||
* Maylan M150 Configuration
|
||||
* Malyan M150 Configuration
|
||||
* Non-Automatic Bed Level config by default
|
||||
*/
|
||||
|
||||
@ -1582,6 +1582,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1544,6 +1544,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1558,6 +1558,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1558,6 +1558,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1556,6 +1556,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1554,6 +1554,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1554,6 +1554,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1566,6 +1566,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1557,6 +1557,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1585,6 +1585,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1554,6 +1554,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1610,6 +1610,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1539,6 +1539,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1545,6 +1545,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1587,6 +1587,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1554,6 +1554,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1548,6 +1548,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1498,6 +1498,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1554,6 +1554,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1688,6 +1688,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1673,6 +1673,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1686,6 +1686,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1675,6 +1675,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1678,6 +1678,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1678,6 +1678,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1687,6 +1687,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1568,6 +1568,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1557,6 +1557,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1428,6 +1428,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1549,6 +1549,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -1559,6 +1559,12 @@
|
||||
//
|
||||
//#define LCD_FOR_MELZI
|
||||
|
||||
//
|
||||
// LCD for Malyan M200 printers.
|
||||
// This requires SDSUPPORT to be enabled
|
||||
//
|
||||
//#define MALYAN_LCD
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: I2C
|
||||
//
|
||||
|
@ -51,11 +51,7 @@
|
||||
|
||||
#if ENABLED(NEWPANEL)
|
||||
void lcd_return_to_status();
|
||||
void lcd_mesh_edit_setup(float initial);
|
||||
float lcd_mesh_edit();
|
||||
void lcd_z_offset_edit_setup(float);
|
||||
extern void _lcd_ubl_output_map_lcd();
|
||||
float lcd_z_offset_edit();
|
||||
#endif
|
||||
|
||||
extern float meshedit_done;
|
||||
|
@ -70,8 +70,10 @@ void GcodeSuite::M104() {
|
||||
}
|
||||
#endif
|
||||
|
||||
#if ENABLED(ULTRA_LCD)
|
||||
if (parser.value_celsius() > thermalManager.degHotend(e))
|
||||
lcd_status_printf_P(0, PSTR("E%i %s"), e + 1, MSG_HEATING);
|
||||
#endif
|
||||
}
|
||||
|
||||
#if ENABLED(AUTOTEMP)
|
||||
@ -124,7 +126,10 @@ void GcodeSuite::M109() {
|
||||
print_job_timer.start();
|
||||
#endif
|
||||
|
||||
if (thermalManager.isHeatingHotend(target_extruder)) lcd_status_printf_P(0, PSTR("E%i %s"), target_extruder + 1, MSG_HEATING);
|
||||
#if ENABLED(ULTRA_LCD)
|
||||
if (thermalManager.isHeatingHotend(target_extruder))
|
||||
lcd_status_printf_P(0, PSTR("E%i %s"), target_extruder + 1, MSG_HEATING);
|
||||
#endif
|
||||
}
|
||||
else return;
|
||||
|
||||
|
449
Marlin/src/lcd/malyanlcd.cpp
Normal file
449
Marlin/src/lcd/malyanlcd.cpp
Normal file
@ -0,0 +1,449 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
/**
|
||||
* malyanlcd.cpp
|
||||
*
|
||||
* LCD implementation for Malyan's LCD, a separate ESP8266 MCU running
|
||||
* on Serial1 for the M200 board. This module outputs a pseudo-gcode
|
||||
* wrapped in curly braces which the LCD implementation translates into
|
||||
* actual G-code commands.
|
||||
*
|
||||
* Added to Marlin for Mini/Malyan M200
|
||||
* Unknown commands as of Jan 2018: {H:}
|
||||
* Not currently implemented:
|
||||
* {E:} when sent by LCD. Meaning unknown.
|
||||
*
|
||||
* Notes for connecting to boards that are not Malyan:
|
||||
* The LCD is 3.3v, so if powering from a RAMPS 1.4 board or
|
||||
* other 5v/12v board, use a buck converter to power the LCD and
|
||||
* the 3.3v side of a logic level shifter. Aux1 on the RAMPS board
|
||||
* has Serial1 and 12v, making it perfect for this.
|
||||
* Copyright (c) 2017 Jason Nelson (xC0000005)
|
||||
*/
|
||||
|
||||
#include "../inc/MarlinConfig.h"
|
||||
#include "../sd/cardreader.h"
|
||||
#include "../sd/SdFatConfig.h"
|
||||
#include "../module/temperature.h"
|
||||
#include "../module/planner.h"
|
||||
#include "../module/stepper.h"
|
||||
#include "../module/motion.h"
|
||||
#include "../module/probe.h"
|
||||
#include "../libs/duration_t.h"
|
||||
#include "../module/printcounter.h"
|
||||
#include "../gcode/gcode.h"
|
||||
#include "../gcode/queue.h"
|
||||
#include "../module/configuration_store.h"
|
||||
|
||||
#include "../Marlin.h"
|
||||
|
||||
#if ENABLED(MALYAN_LCD)
|
||||
|
||||
// On the Malyan M200, this will be Serial1. On a RAMPS board,
|
||||
// it might not be.
|
||||
#define LCD_SERIAL Serial1
|
||||
|
||||
// This is based on longest sys command + a filename, plus some buffer
|
||||
// in case we encounter some data we don't recognize
|
||||
// There is no evidence a line will ever be this long, but better safe than sory
|
||||
#define MAX_CURLY_COMMAND (32 + LONG_FILENAME_LENGTH) * 2
|
||||
|
||||
// Track incoming command bytes from the LCD
|
||||
int inbound_count;
|
||||
|
||||
// Everything written needs the high bit set.
|
||||
void write_to_lcd_P(const char * const message) {
|
||||
char encoded_message[MAX_CURLY_COMMAND];
|
||||
uint8_t message_length = min(strlen_P(message), sizeof(encoded_message));
|
||||
|
||||
for (uint8_t i = 0; i < message_length; i++)
|
||||
encoded_message[i] = pgm_read_byte(message[i]) | 0x80;
|
||||
|
||||
LCD_SERIAL.Print::write(encoded_message, message_length);
|
||||
}
|
||||
|
||||
void write_to_lcd(const char * const message) {
|
||||
char encoded_message[MAX_CURLY_COMMAND];
|
||||
const uint8_t message_length = min(strlen(message), sizeof(encoded_message));
|
||||
|
||||
for (uint8_t i = 0; i < message_length; i++)
|
||||
encoded_message[i] = message[i] | 0x80;
|
||||
|
||||
LCD_SERIAL.Print::write(encoded_message, message_length);
|
||||
}
|
||||
|
||||
/**
|
||||
* Process an LCD 'C' command.
|
||||
* These are currently all temperature commands
|
||||
* {C:T0190}
|
||||
* Set temp for hotend to 190
|
||||
* {C:P050}
|
||||
* Set temp for bed to 50
|
||||
*
|
||||
* the command portion begins after the :
|
||||
*/
|
||||
void process_lcd_c_command(const char* command) {
|
||||
switch (command[0]) {
|
||||
case 'T': {
|
||||
// M104 S<temperature>
|
||||
char cmd[20];
|
||||
sprintf_P(cmd, PSTR("M104 S%s"), command + 1);
|
||||
enqueue_and_echo_command_now(cmd, false);
|
||||
} break;
|
||||
|
||||
case 'P': {
|
||||
// M140 S<temperature>
|
||||
char cmd[20];
|
||||
sprintf_P(cmd, PSTR("M140 S%s"), command + 1);
|
||||
enqueue_and_echo_command_now(cmd, false);
|
||||
} break;
|
||||
|
||||
default:
|
||||
SERIAL_ECHOLNPAIR("UNKNOWN C COMMAND", command);
|
||||
return;
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* Process an LCD 'B' command.
|
||||
* {B:0} results in: {T0:008/195}{T1:000/000}{TP:000/000}{TQ:000C}{TT:000000}
|
||||
* T0/T1 are hot end temperatures, TP is bed, TQ is percent, and TT is probably
|
||||
* time remaining (HH:MM:SS). The UI can't handle displaying a second hotend,
|
||||
* but the stock firmware always sends it, and it's always zero.
|
||||
*/
|
||||
void process_lcd_eb_command(const char* command) {
|
||||
char elapsed_buffer[10];
|
||||
duration_t elapsed;
|
||||
bool has_days;
|
||||
uint8_t len;
|
||||
switch (command[0]) {
|
||||
case '0': {
|
||||
elapsed = print_job_timer.duration();
|
||||
sprintf_P(elapsed_buffer, PSTR("%02u%02u%02u"), uint16_t(elapsed.hour()), uint16_t(elapsed.minute()) % 60UL, elapsed.second());
|
||||
|
||||
char message_buffer[MAX_CURLY_COMMAND];
|
||||
sprintf_P(message_buffer,
|
||||
PSTR("{T0:%03.0f/%03i}{T1:000/000}{TP:%03.0f/%03i}{TQ:%03i}{TT:%s}"),
|
||||
thermalManager.degHotend(0),
|
||||
thermalManager.degTargetHotend(0),
|
||||
thermalManager.degBed(),
|
||||
thermalManager.degTargetBed(),
|
||||
card.percentDone(),
|
||||
elapsed_buffer);
|
||||
write_to_lcd(message_buffer);
|
||||
} break;
|
||||
|
||||
default:
|
||||
SERIAL_ECHOLNPAIR("UNKNOWN E/B COMMAND", command);
|
||||
return;
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* Process an LCD 'J' command.
|
||||
* These are currently all movement commands.
|
||||
* The command portion begins after the :
|
||||
* Move X Axis
|
||||
*
|
||||
* {J:E}{J:X-200}{J:E}
|
||||
* {J:E}{J:X+200}{J:E}
|
||||
* X, Y, Z, A (extruder)
|
||||
*/
|
||||
void process_lcd_j_command(const char* command) {
|
||||
static bool steppers_enabled = false;
|
||||
char axis = command[0];
|
||||
|
||||
switch (axis) {
|
||||
case 'E':
|
||||
// enable or disable steppers
|
||||
// switch to relative
|
||||
enqueue_and_echo_command_now("G91");
|
||||
enqueue_and_echo_command_now(steppers_enabled ? "M18" : "M17");
|
||||
steppers_enabled = !steppers_enabled;
|
||||
break;
|
||||
case 'A':
|
||||
axis = 'E';
|
||||
// fallthru
|
||||
case 'Y':
|
||||
case 'Z':
|
||||
case 'X': {
|
||||
// G0 <AXIS><distance>
|
||||
// The M200 class UI seems to send movement in .1mm values.
|
||||
char cmd[20];
|
||||
sprintf_P(cmd, PSTR("G1 %c%03.1f"), axis, atof(command + 1) / 10.0);
|
||||
enqueue_and_echo_command_now(cmd);
|
||||
} break;
|
||||
default:
|
||||
SERIAL_ECHOLNPAIR("UNKNOWN J COMMAND", command);
|
||||
return;
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* Process an LCD 'P' command, related to homing and printing.
|
||||
* Cancel:
|
||||
* {P:X}
|
||||
*
|
||||
* Home all axes:
|
||||
* {P:H}
|
||||
*
|
||||
* Print a file:
|
||||
* {P:000}
|
||||
* The File number is specified as a three digit value.
|
||||
* Printer responds with:
|
||||
* {PRINTFILE:Mini_SNES_Bottom.gcode}
|
||||
* {SYS:BUILD}echo:Now fresh file: Mini_SNES_Bottom.gcode
|
||||
* File opened: Mini_SNES_Bottom.gcode Size: 5805813
|
||||
* File selected
|
||||
* {SYS:BUILD}
|
||||
* T:-2526.8 E:0
|
||||
* T:-2533.0 E:0
|
||||
* T:-2537.4 E:0
|
||||
* Note only the curly brace stuff matters.
|
||||
*/
|
||||
void process_lcd_p_command(const char* command) {
|
||||
|
||||
switch (command[0]) {
|
||||
case 'X':
|
||||
// cancel print
|
||||
write_to_lcd_P(PSTR("{SYS:CANCELING}"));
|
||||
clear_command_queue();
|
||||
quickstop_stepper();
|
||||
print_job_timer.stop();
|
||||
thermalManager.disable_all_heaters();
|
||||
#if FAN_COUNT > 0
|
||||
for (uint8_t i = 0; i < FAN_COUNT; i++) fanSpeeds[i] = 0;
|
||||
#endif
|
||||
wait_for_heatup = false;
|
||||
write_to_lcd_P(PSTR("{SYS:STARTED}"));
|
||||
break;
|
||||
case 'H':
|
||||
// Home all axis
|
||||
enqueue_and_echo_command_now("G28");
|
||||
break;
|
||||
default: {
|
||||
// Print file 000 - a three digit number indicating which
|
||||
// file to print in the SD card. If it's a directory,
|
||||
// then switch to the directory.
|
||||
|
||||
// Find the name of the file to print.
|
||||
// It's needed to echo the PRINTFILE option.
|
||||
// The {S:L} command should've ensured the SD card was mounted.
|
||||
card.getfilename(atoi(command));
|
||||
|
||||
// There may be a difference in how V1 and V2 LCDs handle subdirectory
|
||||
// prints. Investigate more. This matches the V1 motion controller actions
|
||||
// but the V2 LCD switches to "print" mode on {SYS:DIR} response.
|
||||
if (card.filenameIsDir) {
|
||||
card.chdir(card.filename);
|
||||
write_to_lcd_P(PSTR("{SYS:DIR}"));
|
||||
}
|
||||
else {
|
||||
char message_buffer[MAX_CURLY_COMMAND];
|
||||
sprintf_P(message_buffer, PSTR("{PRINTFILE:%s}"), card.filename);
|
||||
write_to_lcd(message_buffer);
|
||||
write_to_lcd_P(PSTR("{SYS:BUILD}"));
|
||||
card.openAndPrintFile(card.filename);
|
||||
}
|
||||
} break; // default
|
||||
} // switch
|
||||
}
|
||||
|
||||
/**
|
||||
* Handle an lcd 'S' command
|
||||
* {S:I} - Temperature request
|
||||
* {T0:999/000}{T1:000/000}{TP:004/000}
|
||||
*
|
||||
* {S:L} - File Listing request
|
||||
* Printer Response:
|
||||
* {FILE:buttons.gcode}
|
||||
* {FILE:update.bin}
|
||||
* {FILE:nupdate.bin}
|
||||
* {FILE:fcupdate.flg}
|
||||
* {SYS:OK}
|
||||
*/
|
||||
void process_lcd_s_command(const char* command) {
|
||||
switch (command[0]) {
|
||||
case 'I': {
|
||||
// temperature information
|
||||
char message_buffer[MAX_CURLY_COMMAND];
|
||||
sprintf_P(message_buffer, PSTR("{T0:%03.0f/%03i}{T1:000/000}{TP:%03.0f/%03i}"),
|
||||
thermalManager.degHotend(0), thermalManager.degTargetHotend(0),
|
||||
thermalManager.degBed(), thermalManager.degTargetBed()
|
||||
);
|
||||
write_to_lcd(message_buffer);
|
||||
} break;
|
||||
|
||||
case 'H':
|
||||
// Home all axis
|
||||
enqueue_and_echo_command("G28", false);
|
||||
break;
|
||||
|
||||
case 'L': {
|
||||
if (!card.cardOK) card.initsd();
|
||||
|
||||
// A more efficient way to do this would be to
|
||||
// implement a callback in the ls_SerialPrint code, but
|
||||
// that requires changes to the core cardreader class that
|
||||
// would not benefit the majority of users. Since one can't
|
||||
// select a file for printing during a print, there's
|
||||
// little reason not to do it this way.
|
||||
char message_buffer[MAX_CURLY_COMMAND];
|
||||
uint16_t file_count = card.get_num_Files();
|
||||
for (uint16_t i = 0; i < file_count; i++) {
|
||||
card.getfilename(i);
|
||||
sprintf_P(message_buffer, card.filenameIsDir ? PSTR("{DIR:%s}") : PSTR("{FILE:%s}"), card.filename);
|
||||
write_to_lcd(message_buffer);
|
||||
}
|
||||
|
||||
write_to_lcd_P(PSTR("{SYS:OK}"));
|
||||
} break;
|
||||
|
||||
default:
|
||||
SERIAL_ECHOLNPAIR("UNKNOWN S COMMAND", command);
|
||||
return;
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* Receive a curly brace command and translate to G-code.
|
||||
* Currently {E:0} is not handled. Its function is unknown,
|
||||
* but it occurs during the temp window after a sys build.
|
||||
*/
|
||||
void process_lcd_command(const char* command) {
|
||||
const char *current = command;
|
||||
|
||||
current++; // skip the leading {. The trailing one is already gone.
|
||||
byte command_code = *current++;
|
||||
if (*current != ':') {
|
||||
SERIAL_ECHOLNPAIR("UNKNOWN COMMAND FORMAT", command);
|
||||
return;
|
||||
}
|
||||
|
||||
current++; // skip the :
|
||||
|
||||
switch (command_code) {
|
||||
case 'S':
|
||||
process_lcd_s_command(current);
|
||||
break;
|
||||
case 'J':
|
||||
process_lcd_j_command(current);
|
||||
break;
|
||||
case 'P':
|
||||
process_lcd_p_command(current);
|
||||
break;
|
||||
case 'C':
|
||||
process_lcd_c_command(current);
|
||||
break;
|
||||
case 'B':
|
||||
case 'E':
|
||||
process_lcd_eb_command(current);
|
||||
break;
|
||||
default:
|
||||
SERIAL_ECHOLNPAIR("UNKNOWN COMMAND", command);
|
||||
return;
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* UC means connected.
|
||||
* UD means disconnected
|
||||
* The stock firmware considers USB initialied as "connected."
|
||||
*/
|
||||
void update_usb_status(const bool forceUpdate) {
|
||||
static bool last_usb_connected_status = false;
|
||||
// This is mildly different than stock, which
|
||||
// appears to use the usb discovery status.
|
||||
// This is more logical.
|
||||
if (last_usb_connected_status != Serial || forceUpdate) {
|
||||
last_usb_connected_status = Serial;
|
||||
write_to_lcd_P(last_usb_connected_status ? PSTR("{R:UC}\r\n") : PSTR("{R:UD}\r\n"));
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* - from printer on startup:
|
||||
* {SYS:STARTED}{VER:29}{SYS:STARTED}{R:UD}
|
||||
* The optimize attribute fixes a register Compile
|
||||
* error for amtel.
|
||||
*/
|
||||
void lcd_update() _O2 {
|
||||
static char inbound_buffer[MAX_CURLY_COMMAND];
|
||||
|
||||
// First report USB status.
|
||||
update_usb_status(false);
|
||||
|
||||
// now drain commands...
|
||||
while (LCD_SERIAL.available()) {
|
||||
const byte b = (byte)LCD_SERIAL.read() & 0x7F;
|
||||
inbound_buffer[inbound_count++] = b;
|
||||
if (b == '}' || inbound_count == sizeof(inbound_buffer) - 1) {
|
||||
inbound_buffer[inbound_count - 1] = '\0';
|
||||
process_lcd_command(inbound_buffer);
|
||||
inbound_count = 0;
|
||||
inbound_buffer[0] = 0;
|
||||
}
|
||||
}
|
||||
|
||||
// If there's a print in progress, we need to emit the status as
|
||||
// {TQ:<PERCENT>}
|
||||
if (card.sdprinting) {
|
||||
// We also need to send: T:-2538.0 E:0
|
||||
// I have no idea what this means.
|
||||
char message_buffer[10];
|
||||
sprintf_P(message_buffer, PSTR("{TQ:%03i}"), card.percentDone());
|
||||
write_to_lcd(message_buffer);
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* The Malyan LCD actually runs as a separate MCU on Serial 1.
|
||||
* This code's job is to siphon the weird curly-brace commands from
|
||||
* it and translate into gcode, which then gets injected into
|
||||
* the command queue where possible.
|
||||
*/
|
||||
void lcd_init() {
|
||||
inbound_count = 0;
|
||||
LCD_SERIAL.begin(500000);
|
||||
|
||||
// Signal init
|
||||
write_to_lcd_P(PSTR("{SYS:STARTED}\r\n"));
|
||||
|
||||
// send a version that says "unsuported"
|
||||
write_to_lcd_P(PSTR("{VER:66}\r\n"));
|
||||
|
||||
// No idea why it does this twice.
|
||||
write_to_lcd_P(PSTR("{SYS:STARTED}\r\n"));
|
||||
update_usb_status(true);
|
||||
}
|
||||
|
||||
/**
|
||||
* Set an alert.
|
||||
*/
|
||||
void lcd_setalertstatusPGM(const char* message) {
|
||||
char message_buffer[MAX_CURLY_COMMAND];
|
||||
sprintf_P(message_buffer, PSTR("{E:%s}"), message);
|
||||
write_to_lcd(message_buffer);
|
||||
}
|
||||
|
||||
#endif // Malyan LCD
|
@ -1208,7 +1208,7 @@ void kill_screen(const char* lcd_msg) {
|
||||
return mesh_edit_value;
|
||||
}
|
||||
|
||||
void lcd_mesh_edit_setup(const float initial) {
|
||||
void lcd_mesh_edit_setup(const float &initial) {
|
||||
mesh_edit_value = mesh_edit_accumulator = initial;
|
||||
lcd_goto_screen(_lcd_mesh_edit_NOP);
|
||||
}
|
||||
@ -1222,7 +1222,7 @@ void kill_screen(const char* lcd_msg) {
|
||||
return mesh_edit_value;
|
||||
}
|
||||
|
||||
void lcd_z_offset_edit_setup(float initial) {
|
||||
void lcd_z_offset_edit_setup(const float &initial) {
|
||||
mesh_edit_value = mesh_edit_accumulator = initial;
|
||||
lcd_goto_screen(_lcd_z_offset_edit);
|
||||
}
|
||||
|
@ -25,6 +25,11 @@
|
||||
|
||||
#include "../inc/MarlinConfig.h"
|
||||
|
||||
#if ENABLED(ULTRA_LCD) || ENABLED(MALYAN_LCD)
|
||||
void lcd_init();
|
||||
bool lcd_detected();
|
||||
#endif
|
||||
|
||||
#if ENABLED(ULTRA_LCD)
|
||||
|
||||
#include "../Marlin.h"
|
||||
@ -53,16 +58,14 @@
|
||||
int16_t lcd_strlen(const char* s);
|
||||
int16_t lcd_strlen_P(const char* s);
|
||||
void lcd_update();
|
||||
void lcd_init();
|
||||
bool lcd_hasstatus();
|
||||
void lcd_setstatus(const char* message, const bool persist=false);
|
||||
void lcd_setstatusPGM(const char* message, const int8_t level=0);
|
||||
void lcd_setalertstatusPGM(const char* message);
|
||||
void lcd_status_printf_P(const uint8_t level, const char * const fmt, ...);
|
||||
void lcd_reset_alert_level();
|
||||
void lcd_status_printf_P(const uint8_t level, const char * const fmt, ...);
|
||||
void lcd_kill_screen();
|
||||
void kill_screen(const char* lcd_msg);
|
||||
bool lcd_detected(void);
|
||||
|
||||
extern uint8_t lcdDrawUpdate;
|
||||
inline void lcd_refresh() { lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW; }
|
||||
@ -131,9 +134,9 @@
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
void lcd_mesh_edit_setup(float initial);
|
||||
void lcd_mesh_edit_setup(const float &initial);
|
||||
float lcd_mesh_edit();
|
||||
void lcd_z_offset_edit_setup(float);
|
||||
void lcd_z_offset_edit_setup(const float &initial);
|
||||
float lcd_z_offset_edit();
|
||||
#endif
|
||||
|
||||
@ -224,17 +227,17 @@
|
||||
|
||||
constexpr bool lcd_wait_for_move = false;
|
||||
|
||||
inline void lcd_update() {}
|
||||
inline void lcd_init() {}
|
||||
inline bool lcd_detected() { return true; }
|
||||
inline void lcd_update() {}
|
||||
inline void lcd_refresh() {}
|
||||
inline void lcd_buttons_update() {}
|
||||
inline bool lcd_hasstatus() { return false; }
|
||||
inline void lcd_setstatus(const char* const message, const bool persist=false) { UNUSED(message); UNUSED(persist); }
|
||||
inline void lcd_setstatusPGM(const char* const message, const int8_t level=0) { UNUSED(message); UNUSED(level); }
|
||||
inline void lcd_setalertstatusPGM(const char* message) { UNUSED(message); }
|
||||
inline void lcd_status_printf_P(const uint8_t level, const char * const fmt, ...) { UNUSED(level); UNUSED(fmt); }
|
||||
inline void lcd_buttons_update() {}
|
||||
inline void lcd_setalertstatusPGM(const char* message) { UNUSED(message); }
|
||||
inline void lcd_reset_alert_level() {}
|
||||
inline bool lcd_detected() { return true; }
|
||||
inline void lcd_refresh() {}
|
||||
|
||||
#endif // ULTRA_LCD
|
||||
|
||||
|
Loading…
Reference in New Issue
Block a user