Add JUNCTION_DEVIATION to example configs

Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h

@@ -433,6 +433,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h

@@ -433,6 +433,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h

@@ -433,6 +433,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/delta/generic/Configuration_adv.h

@@ -433,6 +433,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h

@@ -433,6 +433,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h

@@ -438,6 +438,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h

@@ -433,6 +433,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]