Updates for G33-LCD interface

Marlin/Marlin_main.cpp

@@ -5168,11 +5168,28 @@ void home_all_axes() { gcode_G28(true); }
       SERIAL_PROTOCOL_F(f, 2);
     }
 
+    inline void print_G33_settings(const bool end_stops, const bool tower_angles){ // TODO echo these to LCD ???
+      SERIAL_PROTOCOLPAIR(".Height:", DELTA_HEIGHT + home_offset[Z_AXIS]);
+      if (end_stops) {
+        print_signed_float(PSTR("  Ex"), endstop_adj[A_AXIS]);
+        print_signed_float(PSTR("Ey"), endstop_adj[B_AXIS]);
+        print_signed_float(PSTR("Ez"), endstop_adj[C_AXIS]);
+        SERIAL_PROTOCOLPAIR("    Radius:", delta_radius);
+      }
+      SERIAL_EOL();
+      if (tower_angles) {
+        SERIAL_PROTOCOLPGM(".Tower angle :  ");
+        print_signed_float(PSTR("Tx"), delta_tower_angle_trim[A_AXIS]);
+        print_signed_float(PSTR("Ty"), delta_tower_angle_trim[B_AXIS]);
+        SERIAL_PROTOCOLLNPGM("  Tz:+0.00");
+      }
+    }
+
     inline void gcode_G33() {
 
       const int8_t probe_points = parser.intval('P', DELTA_CALIBRATION_DEFAULT_POINTS);
       if (!WITHIN(probe_points, 1, 7)) {
-        SERIAL_PROTOCOLLNPGM("?(P)oints is implausible (1 to 7).");
+        SERIAL_PROTOCOLLNPGM("?(P)oints is implausible (1-7).");
         return;
       }
 
@@ -5256,26 +5273,13 @@ void home_all_axes() { gcode_G28(true); }
 
       // print settings
 
-      SERIAL_PROTOCOLPGM("Checking... AC");
+      const char *checkingac = PSTR("Checking... AC"); // TODO: Make translatable string
+      serialprintPGM(checkingac);
       if (verbose_level == 0) SERIAL_PROTOCOLPGM(" (DRY-RUN)");
       SERIAL_EOL();
-      LCD_MESSAGEPGM("Checking... AC"); // TODO: Make translatable string
+      lcd_setstatusPGM(checkingac);
 
-      SERIAL_PROTOCOLPAIR(".Height:", DELTA_HEIGHT + home_offset[Z_AXIS]);
+      print_G33_settings(!_1p_calibration, _7p_calibration && towers_set);
-      if (!_1p_calibration) {
-        print_signed_float(PSTR("  Ex"), endstop_adj[A_AXIS]);
-        print_signed_float(PSTR("Ey"), endstop_adj[B_AXIS]);
-        print_signed_float(PSTR("Ez"), endstop_adj[C_AXIS]);
-        SERIAL_PROTOCOLPAIR("    Radius:", delta_radius);
-      }
-      SERIAL_EOL();
-      if (_7p_calibration && towers_set) {
-        SERIAL_PROTOCOLPGM(".Tower angle :  ");
-        print_signed_float(PSTR("Tx"), delta_tower_angle_trim[A_AXIS]);
-        print_signed_float(PSTR("Ty"), delta_tower_angle_trim[B_AXIS]);
-        SERIAL_PROTOCOLPGM("  Tz:+0.00");
-        SERIAL_EOL();
-      }
 
       #if DISABLED(PROBE_MANUALLY)
         home_offset[Z_AXIS] -= probe_pt(dx, dy, stow_after_each, 1, false); // 1st probe to set height
@@ -5345,7 +5349,6 @@ void home_all_axes() { gcode_G28(true); }
             N++;
           }
         zero_std_dev_old = zero_std_dev;
-        NOMORE(zero_std_dev_min, zero_std_dev);
         zero_std_dev = round(sqrt(S2 / N) * 1000.0) / 1000.0 + 0.00001;
 
         // Solve matrices
@@ -5436,8 +5439,9 @@ void home_all_axes() { gcode_G28(true); }
 
           recalc_delta_settings(delta_radius, delta_diagonal_rod);
         }
+        NOMORE(zero_std_dev_min, zero_std_dev);
 
-         // print report
+        // print report
 
         if (verbose_level != 1) {
           SERIAL_PROTOCOLPGM(".    ");
@@ -5470,47 +5474,51 @@ void home_all_axes() { gcode_G28(true); }
             #endif
               {
                 SERIAL_PROTOCOLPGM("std dev:");
-                SERIAL_PROTOCOL_F(zero_std_dev, 3);
+                SERIAL_PROTOCOL_F(zero_std_dev_min, 3);
               }
             SERIAL_EOL();
-            LCD_MESSAGEPGM("Calibration OK"); // TODO: Make translatable string
+            char mess[21];
+            sprintf_P(mess, PSTR("Calibration sd:"));
+            if (zero_std_dev_min < 1)
+              sprintf_P(&mess[15], PSTR("0.%03i"), (int)round(zero_std_dev_min * 1000.0));
+            else
+              sprintf_P(&mess[15], PSTR("%03i.x"), (int)round(zero_std_dev_min));
+            lcd_setstatus(mess);
+            print_G33_settings(!_1p_calibration, _7p_calibration && towers_set);
+            serialprintPGM(save_message);
+            SERIAL_EOL();
           }
           else {                                                     // !end iterations
-            char mess[15] = "No convergence";
+            char mess[15];
             if (iterations < 31)
               sprintf_P(mess, PSTR("Iteration : %02i"), (int)iterations);
+            else
+              sprintf_P(mess, PSTR("No convergence"));
             SERIAL_PROTOCOL(mess);
             SERIAL_PROTOCOL_SP(36);
             SERIAL_PROTOCOLPGM("std dev:");
             SERIAL_PROTOCOL_F(zero_std_dev, 3);
             SERIAL_EOL();
             lcd_setstatus(mess);
+            print_G33_settings(!_1p_calibration, _7p_calibration && towers_set);
           }
-          SERIAL_PROTOCOLPAIR(".Height:", DELTA_HEIGHT + home_offset[Z_AXIS]);
-          if (!_1p_calibration) {
-            print_signed_float(PSTR("  Ex"), endstop_adj[A_AXIS]);
-            print_signed_float(PSTR("Ey"), endstop_adj[B_AXIS]);
-            print_signed_float(PSTR("Ez"), endstop_adj[C_AXIS]);
-            SERIAL_PROTOCOLPAIR("    Radius:", delta_radius);
-          }
-          SERIAL_EOL();
-          if (_7p_calibration && towers_set) {
-            SERIAL_PROTOCOLPGM(".Tower angle :  ");
-            print_signed_float(PSTR("Tx"), delta_tower_angle_trim[A_AXIS]);
-            print_signed_float(PSTR("Ty"), delta_tower_angle_trim[B_AXIS]);
-            SERIAL_PROTOCOLPGM("  Tz:+0.00");
-            SERIAL_EOL();
-          }
-          if ((zero_std_dev >= test_precision || zero_std_dev <= calibration_precision) && iterations > force_iterations)
-            serialprintPGM(save_message);
-            SERIAL_EOL();
         }
         else {                                                       // dry run
-          SERIAL_PROTOCOLPGM("End DRY-RUN");
+          const char *enddryrun = PSTR("End DRY-RUN");
+          serialprintPGM(enddryrun);
           SERIAL_PROTOCOL_SP(39);
           SERIAL_PROTOCOLPGM("std dev:");
           SERIAL_PROTOCOL_F(zero_std_dev, 3);
           SERIAL_EOL();
+
+          char mess[21];
+          sprintf_P(mess, enddryrun);
+          sprintf_P(&mess[11], PSTR(" sd:"));
+          if (zero_std_dev < 1)
+            sprintf_P(&mess[15], PSTR("0.%03i"), (int)round(zero_std_dev * 1000.0));
+          else
+            sprintf_P(&mess[15], PSTR("%03i.x"), (int)round(zero_std_dev));
+          lcd_setstatus(mess);
         }
 
         endstops.enable(true);

Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h

@@ -482,6 +482,8 @@
   #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU)
     // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS*0.869 for non-eccentric probes
     #define DELTA_CALIBRATION_RADIUS 73.5 // mm
+    // Set the steprate for papertest probing
+    #define PROBE_MANUALLY_STEP 0.025
   #endif
 
   // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).

Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h

@@ -482,6 +482,8 @@
   #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU)
     // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS*0.869 for non-eccentric probes
     #define DELTA_CALIBRATION_RADIUS 73.5 // mm
+    // Set the steprate for papertest probing
+    #define PROBE_MANUALLY_STEP 0.025
   #endif
 
   // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).

Marlin/example_configurations/delta/generic/Configuration.h

@@ -472,6 +472,8 @@
   #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU)
     // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS*0.869 for non-eccentric probes
     #define DELTA_CALIBRATION_RADIUS 121.5 // mm
+    // Set the steprate for papertest probing
+    #define PROBE_MANUALLY_STEP 0.025
   #endif
 
   // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).

Marlin/example_configurations/delta/kossel_mini/Configuration.h

@@ -472,6 +472,8 @@
   #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU)
     // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS*0.869 for non-eccentric probes
     #define DELTA_CALIBRATION_RADIUS 78.0 // mm
+    // Set the steprate for papertest probing
+    #define PROBE_MANUALLY_STEP 0.025
   #endif
 
   // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).

Marlin/example_configurations/delta/kossel_pro/Configuration.h

@@ -458,6 +458,8 @@
   #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU)
     // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS*0.869 for non-eccentric probes
     #define DELTA_CALIBRATION_RADIUS 110.0 // mm
+    // Set the steprate for papertest probing
+    #define PROBE_MANUALLY_STEP 0.025
   #endif
 
   // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).

Marlin/example_configurations/delta/kossel_xl/Configuration.h

@@ -476,6 +476,8 @@
   #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU)
     // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS*0.869 for non-eccentric probes
     #define DELTA_CALIBRATION_RADIUS 121.5 // mm
+    // Set the steprate for papertest probing
+    #define PROBE_MANUALLY_STEP 0.025
   #endif
 
   // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).

Marlin/language_en.h

@@ -713,6 +713,9 @@
 #ifndef MSG_DELTA_CALIBRATE_CENTER
   #define MSG_DELTA_CALIBRATE_CENTER          _UxGT("Calibrate Center")
 #endif
+#ifndef MSG_DELTA_SETTINGS
+  #define MSG_DELTA_SETTINGS                  _UxGT("Show Delta Settings")
+#endif
 #ifndef MSG_DELTA_AUTO_CALIBRATE
   #define MSG_DELTA_AUTO_CALIBRATE            _UxGT("Auto Calibration")
 #endif

Marlin/ultralcd.cpp

@@ -2500,16 +2500,19 @@ void kill_screen(const char* lcd_msg) {
       line_to_z(z_dest);
 
       lcd_synchronize();
-      move_menu_scale = 0.1;
+      move_menu_scale = PROBE_MANUALLY_STEP;
       lcd_goto_screen(lcd_move_z);
     }
 
     float lcd_probe_pt(const float &lx, const float &ly) {
       _man_probe_pt(lx, ly);
       KEEPALIVE_STATE(PAUSED_FOR_USER);
+      defer_return_to_status = true;
       wait_for_user = true;
       while (wait_for_user) idle();
       KEEPALIVE_STATE(IN_HANDLER);
+      defer_return_to_status = false;
+      lcd_goto_previous_menu();
       return current_position[Z_AXIS];
     }
 
@@ -2518,12 +2521,32 @@ void kill_screen(const char* lcd_msg) {
     void _goto_tower_z() { _man_probe_pt(cos(RADIANS( 90)) * delta_calibration_radius, sin(RADIANS( 90)) * delta_calibration_radius); }
     void _goto_center()  { _man_probe_pt(0,0); }
 
+    void lcd_delta_G33_settings() {
+      START_MENU();
+      MENU_BACK(MSG_DELTA_CALIBRATE);
+      float delta_height = DELTA_HEIGHT + home_offset[Z_AXIS], Tz = 0.00;
+      MENU_ITEM_EDIT(float52, "Height", &delta_height, delta_height, delta_height);
+      MENU_ITEM_EDIT(float43, "Ex", &endstop_adj[A_AXIS], -5.0, 5.0);
+      MENU_ITEM_EDIT(float43, "Ey", &endstop_adj[B_AXIS], -5.0, 5.0);
+      MENU_ITEM_EDIT(float43, "Ez", &endstop_adj[C_AXIS], -5.0, 5.0);
+      MENU_ITEM_EDIT(float52, "Radius", &delta_radius, DELTA_RADIUS - 5.0, DELTA_RADIUS + 5.0);
+      MENU_ITEM_EDIT(float43, "Tx", &delta_tower_angle_trim[A_AXIS], -5.0, 5.0);
+      MENU_ITEM_EDIT(float43, "Ty", &delta_tower_angle_trim[B_AXIS], -5.0, 5.0);
+      MENU_ITEM_EDIT(float43, "Tz", &Tz, -5.0, 5.0);
+      END_MENU();
+    }
+
     void lcd_delta_calibrate_menu() {
       START_MENU();
       MENU_BACK(MSG_MAIN);
       #if ENABLED(DELTA_AUTO_CALIBRATION)
+        MENU_ITEM(submenu, MSG_DELTA_SETTINGS, lcd_delta_G33_settings);
         MENU_ITEM(gcode, MSG_DELTA_AUTO_CALIBRATE, PSTR("G33"));
         MENU_ITEM(gcode, MSG_DELTA_HEIGHT_CALIBRATE, PSTR("G33 P1"));
+        #if ENABLED(EEPROM_SETTINGS)
+          MENU_ITEM(function, MSG_STORE_EEPROM, lcd_store_settings);
+          MENU_ITEM(function, MSG_LOAD_EEPROM, lcd_load_settings);
+        #endif
       #endif
       MENU_ITEM(submenu, MSG_AUTO_HOME, _lcd_delta_calibrate_home);
       if (axis_homed[Z_AXIS]) {
@@ -2612,7 +2635,8 @@ void kill_screen(const char* lcd_msg) {
       encoderPosition = 0;
       lcdDrawUpdate = LCDVIEW_REDRAW_NOW;
     }
-    if (lcdDrawUpdate) lcd_implementation_drawedit(name, ftostr41sign(current_position[axis]));
+    if (lcdDrawUpdate)
+      lcd_implementation_drawedit(name, move_menu_scale >= 0.1 ? ftostr41sign(current_position[axis]) : ftostr43sign(current_position[axis]));
   }
   void lcd_move_x() { _lcd_move_xyz(PSTR(MSG_MOVE_X), X_AXIS); }
   void lcd_move_y() { _lcd_move_xyz(PSTR(MSG_MOVE_Y), Y_AXIS); }

Marlin/utility.h

@@ -47,7 +47,7 @@ void safe_delay(millis_t ms);
   char* ftostr12ns(const float &x);
 
   // Convert signed float to fixed-length string with 023.45 / -23.45 format
-  char *ftostr32(const float &x);
+  char* ftostr32(const float &x);
 
   // Convert float to fixed-length string with +123.4 / -123.4 format
   char* ftostr41sign(const float &x);