From 4b16fa3272032a66200515750608f35dffbf1c09 Mon Sep 17 00:00:00 2001 From: Christopher Pepper Date: Sun, 18 Jun 2017 00:36:10 +0100 Subject: [PATCH] Implement HAL and apply macros across code-base Implement AVR Platform --- .gitignore | 6 +- Marlin/Conditionals_post.h | 81 ++++++- Marlin/Marlin.h | 7 +- Marlin/MarlinConfig.h | 5 +- Marlin/Marlin_main.cpp | 50 ++-- Marlin/Sd2Card.cpp | 151 +------------ Marlin/Sd2Card.h | 18 +- Marlin/SdFile.h | 5 +- Marlin/boards.h | 23 ++ Marlin/buzzer.h | 1 - Marlin/circularqueue.h | 2 +- Marlin/configuration_store.cpp | 48 +--- Marlin/configuration_store.h | 2 - Marlin/dac_dac084s085.cpp | 108 +++++++++ Marlin/dac_dac084s085.h | 11 + Marlin/hex_print_routines.cpp | 2 +- Marlin/macros.h | 5 - Marlin/pins.h | 110 +++++---- Marlin/pins_RAMPS.h | 6 +- Marlin/planner.cpp | 2 +- Marlin/printcounter.h | 12 +- Marlin/{spi.h => private_spi.h} | 6 +- Marlin/serial.h | 26 ++- Marlin/src/HAL/HAL.h | 94 ++++++++ Marlin/src/HAL/HAL_AVR/HAL_AVR.cpp | 100 ++++++++ Marlin/src/HAL/HAL_AVR/HAL_AVR.h | 160 +++++++++++++ .../HAL/HAL_AVR/HAL_pinsDebug_AVR.h} | 24 +- Marlin/src/HAL/HAL_AVR/HAL_spi_AVR.cpp | 213 ++++++++++++++++++ Marlin/{ => src/HAL/HAL_AVR}/MarlinSerial.cpp | 9 +- Marlin/{ => src/HAL/HAL_AVR}/MarlinSerial.h | 5 +- Marlin/src/HAL/HAL_AVR/ServoTimers.h | 90 ++++++++ .../HAL/HAL_AVR}/endstop_interrupts.h | 12 +- Marlin/{ => src/HAL/HAL_AVR}/fastio_1280.h | 2 +- Marlin/{ => src/HAL/HAL_AVR}/fastio_1281.h | 2 +- Marlin/{ => src/HAL/HAL_AVR}/fastio_168.h | 2 +- Marlin/{ => src/HAL/HAL_AVR}/fastio_644.h | 2 +- Marlin/{ => src/HAL/HAL_AVR}/fastio_AT90USB.h | 2 +- .../HAL/HAL_AVR/fastio_AVR.h} | 7 +- Marlin/src/HAL/HAL_AVR/math_AVR.h | 112 +++++++++ Marlin/src/HAL/HAL_AVR/persistent_store.cpp | 57 +++++ .../HAL/HAL_AVR}/pinsDebug_Teensyduino.h | 0 .../{ => src/HAL/HAL_AVR}/pinsDebug_plus_70.h | 0 .../HAL/HAL_AVR/servo_AVR.cpp} | 127 +---------- Marlin/src/HAL/HAL_AVR/spi_pins.h | 67 ++++++ .../HAL/HAL_AVR/watchdog_AVR.cpp} | 7 +- .../HAL/HAL_AVR/watchdog_AVR.h} | 7 +- Marlin/src/HAL/HAL_endstop_interrupts.h | 53 +++++ Marlin/src/HAL/HAL_pinsDebug.h | 35 +++ Marlin/src/HAL/HAL_spi_pins.h | 39 ++++ Marlin/src/HAL/I2cEeprom.cpp | 162 +++++++++++++ Marlin/src/HAL/SpiEeprom.cpp | 117 ++++++++++ Marlin/src/HAL/math_32bit.h | 33 +++ Marlin/src/HAL/persistent_store_api.h | 19 ++ Marlin/src/HAL/servo.cpp | 168 ++++++++++++++ Marlin/{ => src/HAL}/servo.h | 70 +----- Marlin/src/HAL/servo_private.h | 103 +++++++++ Marlin/stepper.cpp | 178 +++++++-------- Marlin/stepper.h | 128 ++++++----- Marlin/temperature.cpp | 118 +++++----- Marlin/temperature.h | 2 +- Marlin/ubl_G29.cpp | 2 +- Marlin/ubl_motion.cpp | 2 - Marlin/ultralcd.cpp | 4 +- Marlin/ultralcd_impl_DOGM.h | 2 +- Marlin/ultralcd_impl_HD44780.h | 2 +- 65 files changed, 2264 insertions(+), 761 deletions(-) create mode 100644 Marlin/dac_dac084s085.cpp create mode 100644 Marlin/dac_dac084s085.h rename Marlin/{spi.h => private_spi.h} (95%) create mode 100644 Marlin/src/HAL/HAL.h create mode 100644 Marlin/src/HAL/HAL_AVR/HAL_AVR.cpp create mode 100644 Marlin/src/HAL/HAL_AVR/HAL_AVR.h rename Marlin/{pinsDebug.h => src/HAL/HAL_AVR/HAL_pinsDebug_AVR.h} (96%) create mode 100644 Marlin/src/HAL/HAL_AVR/HAL_spi_AVR.cpp rename Marlin/{ => src/HAL/HAL_AVR}/MarlinSerial.cpp (99%) rename Marlin/{ => src/HAL/HAL_AVR}/MarlinSerial.h (98%) create mode 100644 Marlin/src/HAL/HAL_AVR/ServoTimers.h rename Marlin/{ => src/HAL/HAL_AVR}/endstop_interrupts.h (93%) rename Marlin/{ => src/HAL/HAL_AVR}/fastio_1280.h (99%) rename Marlin/{ => src/HAL/HAL_AVR}/fastio_1281.h (99%) rename Marlin/{ => src/HAL/HAL_AVR}/fastio_168.h (99%) rename Marlin/{ => src/HAL/HAL_AVR}/fastio_644.h (99%) rename Marlin/{ => src/HAL/HAL_AVR}/fastio_AT90USB.h (99%) rename Marlin/{fastio.h => src/HAL/HAL_AVR/fastio_AVR.h} (99%) create mode 100644 Marlin/src/HAL/HAL_AVR/math_AVR.h create mode 100644 Marlin/src/HAL/HAL_AVR/persistent_store.cpp rename Marlin/{ => src/HAL/HAL_AVR}/pinsDebug_Teensyduino.h (100%) rename Marlin/{ => src/HAL/HAL_AVR}/pinsDebug_plus_70.h (100%) rename Marlin/{servo.cpp => src/HAL/HAL_AVR/servo_AVR.cpp} (62%) create mode 100644 Marlin/src/HAL/HAL_AVR/spi_pins.h rename Marlin/{watchdog.cpp => src/HAL/HAL_AVR/watchdog_AVR.cpp} (95%) rename Marlin/{watchdog.h => src/HAL/HAL_AVR/watchdog_AVR.h} (93%) create mode 100644 Marlin/src/HAL/HAL_endstop_interrupts.h create mode 100644 Marlin/src/HAL/HAL_pinsDebug.h create mode 100644 Marlin/src/HAL/HAL_spi_pins.h create mode 100644 Marlin/src/HAL/I2cEeprom.cpp create mode 100644 Marlin/src/HAL/SpiEeprom.cpp create mode 100644 Marlin/src/HAL/math_32bit.h create mode 100644 Marlin/src/HAL/persistent_store_api.h create mode 100644 Marlin/src/HAL/servo.cpp rename Marlin/{ => src/HAL}/servo.h (70%) create mode 100644 Marlin/src/HAL/servo_private.h diff --git a/.gitignore b/.gitignore index 8c7053826c..88416030f3 100755 --- a/.gitignore +++ b/.gitignore @@ -118,7 +118,11 @@ tags # PlatformIO files/dirs .pio* -lib/readme.txt +.pioenvs +.piolibdeps +.clang_complete +.gcc-flags.json +lib/ #Visual Studio *.sln diff --git a/Marlin/Conditionals_post.h b/Marlin/Conditionals_post.h index 0543e34523..c50480b971 100644 --- a/Marlin/Conditionals_post.h +++ b/Marlin/Conditionals_post.h @@ -203,6 +203,22 @@ #define DEFAULT_KEEPALIVE_INTERVAL 2 #endif + #ifdef CPU_32_BIT + /** + * Hidden options for developer + */ + // Double stepping start from STEP_DOUBLER_FREQUENCY + 1, quad stepping start from STEP_DOUBLER_FREQUENCY * 2 + 1 + #ifndef STEP_DOUBLER_FREQUENCY + #if ENABLED(ADVANCE) || ENABLED(LIN_ADVANCE) + #define STEP_DOUBLER_FREQUENCY 60000 // Hz + #else + #define STEP_DOUBLER_FREQUENCY 80000 // Hz + #endif + #endif + // Disable double / quad stepping + //#define DISABLE_MULTI_STEPPING + #endif + /** * Provide a MAX_AUTORETRACT for older configs */ @@ -214,9 +230,17 @@ * MAX_STEP_FREQUENCY differs for TOSHIBA */ #if ENABLED(CONFIG_STEPPERS_TOSHIBA) - #define MAX_STEP_FREQUENCY 10000 // Max step frequency for Toshiba Stepper Controllers + #ifdef CPU_32_BIT + #define MAX_STEP_FREQUENCY STEP_DOUBLER_FREQUENCY // Max step frequency for Toshiba Stepper Controllers, 96kHz is close to maximum for an Arduino Due + #else + #define MAX_STEP_FREQUENCY 10000 // Max step frequency for Toshiba Stepper Controllers + #endif #else - #define MAX_STEP_FREQUENCY 40000 // Max step frequency for Ultimaker (5000 pps / half step) + #ifdef CPU_32_BIT + #define MAX_STEP_FREQUENCY (STEP_DOUBLER_FREQUENCY * 4) // Max step frequency for the Due is approx. 330kHz + #else + #define MAX_STEP_FREQUENCY 40000 // Max step frequency for Ultimaker (5000 pps / half step) + #endif #endif // MS1 MS2 Stepper Driver Microstepping mode table @@ -224,7 +248,16 @@ #define MICROSTEP2 HIGH,LOW #define MICROSTEP4 LOW,HIGH #define MICROSTEP8 HIGH,HIGH + #ifdef __SAM3X8E__ + #if MB(ALLIGATOR) + #define MICROSTEP16 LOW,LOW + #define MICROSTEP32 HIGH,HIGH + #else + #define MICROSTEP16 HIGH,HIGH + #endif + #else #define MICROSTEP16 HIGH,HIGH + #endif /** * Advance calculated values @@ -350,6 +383,10 @@ #define BED_USES_THERMISTOR #endif + #ifdef __SAM3X8E__ + #define HEATER_USES_AD595 (ENABLED(HEATER_0_USES_AD595) || ENABLED(HEATER_1_USES_AD595) || ENABLED(HEATER_2_USES_AD595) || ENABLED(HEATER_3_USES_AD595)) + #endif + /** * Flags for PID handling */ @@ -873,6 +910,18 @@ // Stepper pulse duration, in cycles #define STEP_PULSE_CYCLES ((MINIMUM_STEPPER_PULSE) * CYCLES_PER_MICROSECOND) + #ifdef CPU_32_BIT + // Add additional delay for between direction signal and pulse signal of stepper + #ifndef STEPPER_DIRECTION_DELAY + #define STEPPER_DIRECTION_DELAY 0 // time in microseconds + #endif + #endif + + #ifndef __SAM3X8E__ //todo: hal: broken hal encapsulation + #undef UI_VOLTAGE_LEVEL + #undef RADDS_DISPLAY + #undef MOTOR_CURRENT + #endif #if ENABLED(SDCARD_SORT_ALPHA) #define HAS_FOLDER_SORTING (FOLDER_SORTING || ENABLED(SDSORT_GCODE)) @@ -928,4 +977,32 @@ #endif #endif + // Use float instead of double. Needs profiling. + #if defined(ARDUINO_ARCH_SAM) && ENABLED(DELTA_FAST_SQRT) + #undef ATAN2 + #undef FABS + #undef POW + #undef SQRT + #undef CEIL + #undef FLOOR + #undef LROUND + #undef FMOD + #define ATAN2(y, x) atan2f(y, x) + #define FABS(x) fabsf(x) + #define POW(x, y) powf(x, y) + #define SQRT(x) sqrtf(x) + #define CEIL(x) ceilf(x) + #define FLOOR(x) floorf(x) + #define LROUND(x) lroundf(x) + #define FMOD(x, y) fmodf(x, y) + #endif + + #ifdef TEENSYDUINO + #undef max + #define max(a,b) ((a)>(b)?(a):(b)) + #undef min + #define min(a,b) ((a)<(b)?(a):(b)) + + #define NOT_A_PIN 0 // For PINS_DEBUGGING + #endif #endif // CONDITIONALS_POST_H diff --git a/Marlin/Marlin.h b/Marlin/Marlin.h index 1e65d1b4eb..4292ccddb4 100644 --- a/Marlin/Marlin.h +++ b/Marlin/Marlin.h @@ -28,20 +28,15 @@ #include #include -#include -#include -#include -#include - #include "MarlinConfig.h" #ifdef DEBUG_GCODE_PARSER #include "gcode.h" #endif +#include "src/HAL/HAL.h" #include "enum.h" #include "types.h" -#include "fastio.h" #include "utility.h" #include "serial.h" diff --git a/Marlin/MarlinConfig.h b/Marlin/MarlinConfig.h index 64e0bac51f..847562b0de 100644 --- a/Marlin/MarlinConfig.h +++ b/Marlin/MarlinConfig.h @@ -23,18 +23,17 @@ #ifndef MARLIN_CONFIG_H #define MARLIN_CONFIG_H -#include "fastio.h" #include "macros.h" +#include "src/HAL/HAL.h" #include "boards.h" #include "Version.h" #include "Configuration.h" #include "Conditionals_LCD.h" #include "Configuration_adv.h" #include "pins.h" -#ifndef USBCON +#if defined(ARDUINO_ARCH_AVR) && !defined(USBCON) #define HardwareSerial_h // trick to disable the standard HWserial #endif -#include "Arduino.h" #include "Conditionals_post.h" #include "SanityCheck.h" diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index b5f757e4ea..9b84c8e235 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -251,7 +251,9 @@ #include "cardreader.h" #include "configuration_store.h" #include "language.h" -#include "pins_arduino.h" +#ifdef ARDUINO + #include "pins_arduino.h" +#endif #include "math.h" #include "nozzle.h" #include "duration_t.h" @@ -275,10 +277,6 @@ #include "buzzer.h" #endif -#if ENABLED(USE_WATCHDOG) - #include "watchdog.h" -#endif - #if ENABLED(MAX7219_DEBUG) #include "Max7219_Debug_LEDs.h" #endif @@ -297,7 +295,7 @@ #endif #if HAS_SERVOS - #include "servo.h" + #include "src/HAL/servo.h" #endif #if HAS_DIGIPOTSS @@ -317,7 +315,7 @@ #endif #if ENABLED(ENDSTOP_INTERRUPTS_FEATURE) - #include "endstop_interrupts.h" + #include "src/HAL/HAL_endstop_interrupts.h" #endif #if ENABLED(M100_FREE_MEMORY_WATCHER) @@ -653,7 +651,7 @@ float cartes[XYZ] = { 0 }; static bool send_ok[BUFSIZE]; #if HAS_SERVOS - Servo servo[NUM_SERVOS]; + HAL_SERVO_LIB servo[NUM_SERVOS]; #define MOVE_SERVO(I, P) servo[I].move(P) #if HAS_Z_SERVO_ENDSTOP #define DEPLOY_Z_SERVO() MOVE_SERVO(Z_ENDSTOP_SERVO_NR, z_servo_angle[0]) @@ -789,26 +787,6 @@ inline void sync_plan_position_e() { planner.set_e_position_mm(current_position[ #endif -#if ENABLED(SDSUPPORT) - #include "SdFatUtil.h" - int freeMemory() { return SdFatUtil::FreeRam(); } -#else -extern "C" { - extern char __bss_end; - extern char __heap_start; - extern void* __brkval; - - int freeMemory() { - int free_memory; - if ((int)__brkval == 0) - free_memory = ((int)&free_memory) - ((int)&__bss_end); - else - free_memory = ((int)&free_memory) - ((int)__brkval); - return free_memory; - } -} -#endif // !SDSUPPORT - #if ENABLED(DIGIPOT_I2C) extern void digipot_i2c_set_current(uint8_t channel, float current); extern void digipot_i2c_init(); @@ -11845,7 +11823,7 @@ void ok_to_send() { delta_diagonal_rod_2_tower[C_AXIS] = sq(diagonal_rod + drt[C_AXIS]); } - #if ENABLED(DELTA_FAST_SQRT) + #if ENABLED(DELTA_FAST_SQRT) && defined(ARDUINO_ARCH_AVR) /** * Fast inverse sqrt from Quake III Arena * See: https://en.wikipedia.org/wiki/Fast_inverse_square_root @@ -13357,17 +13335,22 @@ void setup() { #endif MYSERIAL.begin(BAUDRATE); + while(!MYSERIAL); SERIAL_PROTOCOLLNPGM("start"); SERIAL_ECHO_START(); // Check startup - does nothing if bootloader sets MCUSR to 0 - byte mcu = MCUSR; + byte mcu = HAL_get_reset_source(); if (mcu & 1) SERIAL_ECHOLNPGM(MSG_POWERUP); if (mcu & 2) SERIAL_ECHOLNPGM(MSG_EXTERNAL_RESET); if (mcu & 4) SERIAL_ECHOLNPGM(MSG_BROWNOUT_RESET); if (mcu & 8) SERIAL_ECHOLNPGM(MSG_WATCHDOG_RESET); if (mcu & 32) SERIAL_ECHOLNPGM(MSG_SOFTWARE_RESET); - MCUSR = 0; + HAL_clear_reset_source(); + + #if ENABLED(USE_WATCHDOG) //reinit watchdog after HAL_get_reset_source call + watchdog_init(); + #endif SERIAL_ECHOPGM(MSG_MARLIN); SERIAL_CHAR(' '); @@ -13406,10 +13389,6 @@ void setup() { thermalManager.init(); // Initialize temperature loop - #if ENABLED(USE_WATCHDOG) - watchdog_init(); - #endif - stepper.init(); // Initialize stepper, this enables interrupts! servo_init(); @@ -13619,4 +13598,3 @@ void loop() { endstops.report_state(); idle(); } - diff --git a/Marlin/Sd2Card.cpp b/Marlin/Sd2Card.cpp index 2afe9a8b48..512871f218 100644 --- a/Marlin/Sd2Card.cpp +++ b/Marlin/Sd2Card.cpp @@ -31,136 +31,6 @@ #if ENABLED(SDSUPPORT) #include "Sd2Card.h" -#if ENABLED(USE_WATCHDOG) - #include "watchdog.h" -#endif - -//------------------------------------------------------------------------------ -#if DISABLED(SOFTWARE_SPI) - // functions for hardware SPI - //------------------------------------------------------------------------------ - // make sure SPCR rate is in expected bits - #if (SPR0 != 0 || SPR1 != 1) - #error "unexpected SPCR bits" - #endif - /** - * Initialize hardware SPI - * Set SCK rate to F_CPU/pow(2, 1 + spiRate) for spiRate [0,6] - */ - static void spiInit(uint8_t spiRate) { - // See avr processor documentation - SPCR = _BV(SPE) | _BV(MSTR) | (spiRate >> 1); - SPSR = spiRate & 1 || spiRate == 6 ? 0 : _BV(SPI2X); - } - //------------------------------------------------------------------------------ - /** SPI receive a byte */ - static uint8_t spiRec() { - SPDR = 0xFF; - while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ } - return SPDR; - } - //------------------------------------------------------------------------------ - /** SPI read data - only one call so force inline */ - static inline __attribute__((always_inline)) - void spiRead(uint8_t* buf, uint16_t nbyte) { - if (nbyte-- == 0) return; - SPDR = 0xFF; - for (uint16_t i = 0; i < nbyte; i++) { - while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ } - buf[i] = SPDR; - SPDR = 0xFF; - } - while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ } - buf[nbyte] = SPDR; - } - //------------------------------------------------------------------------------ - /** SPI send a byte */ - static void spiSend(uint8_t b) { - SPDR = b; - while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ } - } - //------------------------------------------------------------------------------ - /** SPI send block - only one call so force inline */ - static inline __attribute__((always_inline)) - void spiSendBlock(uint8_t token, const uint8_t* buf) { - SPDR = token; - for (uint16_t i = 0; i < 512; i += 2) { - while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ } - SPDR = buf[i]; - while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ } - SPDR = buf[i + 1]; - } - while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ } - } - //------------------------------------------------------------------------------ -#else // SOFTWARE_SPI - //------------------------------------------------------------------------------ - /** nop to tune soft SPI timing */ - #define nop asm volatile ("nop\n\t") - //------------------------------------------------------------------------------ - /** Soft SPI receive byte */ - static uint8_t spiRec() { - uint8_t data = 0; - // no interrupts during byte receive - about 8 us - cli(); - // output pin high - like sending 0xFF - WRITE(SPI_MOSI_PIN, HIGH); - - for (uint8_t i = 0; i < 8; i++) { - WRITE(SPI_SCK_PIN, HIGH); - - // adjust so SCK is nice - nop; - nop; - - data <<= 1; - - if (READ(SPI_MISO_PIN)) data |= 1; - - WRITE(SPI_SCK_PIN, LOW); - } - // enable interrupts - sei(); - return data; - } - //------------------------------------------------------------------------------ - /** Soft SPI read data */ - static void spiRead(uint8_t* buf, uint16_t nbyte) { - for (uint16_t i = 0; i < nbyte; i++) - buf[i] = spiRec(); - } - //------------------------------------------------------------------------------ - /** Soft SPI send byte */ - static void spiSend(uint8_t data) { - // no interrupts during byte send - about 8 us - cli(); - for (uint8_t i = 0; i < 8; i++) { - WRITE(SPI_SCK_PIN, LOW); - - WRITE(SPI_MOSI_PIN, data & 0x80); - - data <<= 1; - - WRITE(SPI_SCK_PIN, HIGH); - } - // hold SCK high for a few ns - nop; - nop; - nop; - nop; - - WRITE(SPI_SCK_PIN, LOW); - // enable interrupts - sei(); - } - //------------------------------------------------------------------------------ - /** Soft SPI send block */ - void spiSendBlock(uint8_t token, const uint8_t* buf) { - spiSend(token); - for (uint16_t i = 0; i < 512; i++) - spiSend(buf[i]); - } -#endif // SOFTWARE_SPI //------------------------------------------------------------------------------ // send command and return error code. Return zero for OK uint8_t Sd2Card::cardCommand(uint8_t cmd, uint32_t arg) { @@ -310,23 +180,12 @@ bool Sd2Card::init(uint8_t sckRateID, uint8_t chipSelectPin) { #endif // set pin modes - pinMode(chipSelectPin_, OUTPUT); - chipSelectHigh(); - SET_INPUT(SPI_MISO_PIN); - SET_OUTPUT(SPI_MOSI_PIN); - SET_OUTPUT(SPI_SCK_PIN); +//todo: should use chipSelectPin ? + spiBegin(); - #if DISABLED(SOFTWARE_SPI) - // SS must be in output mode even it is not chip select - SET_OUTPUT(SS_PIN); - // set SS high - may be chip select for another SPI device - #if SET_SPI_SS_HIGH - WRITE(SS_PIN, HIGH); - #endif // SET_SPI_SS_HIGH - // set SCK rate for initialization commands - spiRate_ = SPI_SD_INIT_RATE; - spiInit(spiRate_); - #endif // SOFTWARE_SPI + // set SCK rate for initialization commands + spiRate_ = SPI_SD_INIT_RATE; + spiInit(spiRate_); // must supply min of 74 clock cycles with CS high. for (uint8_t i = 0; i < 10; i++) spiSend(0xFF); diff --git a/Marlin/Sd2Card.h b/Marlin/Sd2Card.h index 1fbd527473..536737355d 100644 --- a/Marlin/Sd2Card.h +++ b/Marlin/Sd2Card.h @@ -39,18 +39,6 @@ #include "SdFatConfig.h" #include "SdInfo.h" //------------------------------------------------------------------------------ -// SPI speed is F_CPU/2^(1 + index), 0 <= index <= 6 -/** Set SCK to max rate of F_CPU/2. See Sd2Card::setSckRate(). */ -uint8_t const SPI_FULL_SPEED = 0; -/** Set SCK rate to F_CPU/4. See Sd2Card::setSckRate(). */ -uint8_t const SPI_HALF_SPEED = 1; -/** Set SCK rate to F_CPU/8. See Sd2Card::setSckRate(). */ -uint8_t const SPI_QUARTER_SPEED = 2; -/** Set SCK rate to F_CPU/16. See Sd2Card::setSckRate(). */ -uint8_t const SPI_EIGHTH_SPEED = 3; -/** Set SCK rate to F_CPU/32. See Sd2Card::setSckRate(). */ -uint8_t const SPI_SIXTEENTH_SPEED = 4; -//------------------------------------------------------------------------------ /** init timeout ms */ uint16_t const SD_INIT_TIMEOUT = 2000; /** erase timeout ms */ @@ -133,6 +121,9 @@ uint8_t const SD_CARD_TYPE_SDHC = 3; //------------------------------------------------------------------------------ // SPI pin definitions - do not edit here - change in SdFatConfig.h // +#define SD_CHIP_SELECT_PIN SS_PIN + +#if 0 #if DISABLED(SOFTWARE_SPI) // hardware pin defs /** The default chip select pin for the SD card is SS. */ @@ -156,6 +147,9 @@ uint8_t const SD_CARD_TYPE_SDHC = 3; /** SPI Clock pin */ #define SPI_SCK_PIN SOFT_SPI_SCK_PIN #endif // SOFTWARE_SPI + +#endif + //------------------------------------------------------------------------------ /** * \class Sd2Card diff --git a/Marlin/SdFile.h b/Marlin/SdFile.h index 53f38255cb..d9dbdc370e 100644 --- a/Marlin/SdFile.h +++ b/Marlin/SdFile.h @@ -34,7 +34,8 @@ #if ENABLED(SDSUPPORT) #include "SdBaseFile.h" -#include +//todo: HAL: create wrapper for Print? +//#include #ifndef SdFile_h #define SdFile_h //------------------------------------------------------------------------------ @@ -42,7 +43,7 @@ * \class SdFile * \brief SdBaseFile with Print. */ -class SdFile : public SdBaseFile, public Print { +class SdFile : public SdBaseFile/*, public Print*/ { public: SdFile() {} SdFile(const char* name, uint8_t oflag); diff --git a/Marlin/boards.h b/Marlin/boards.h index 398165e46c..7f564a7ca3 100644 --- a/Marlin/boards.h +++ b/Marlin/boards.h @@ -76,6 +76,7 @@ #define BOARD_BRAINWAVE 82 // Brainwave (AT90USB646) #define BOARD_SAV_MKI 83 // SAV Mk-I (AT90USB1286) #define BOARD_TEENSY2 84 // Teensy++2.0 (AT90USB1286) - CLI compile: HARDWARE_MOTHERBOARD=84 make +#define BOARD_TEENSY35_36 841 // Teensy3.5 and Teensy3.6 #define BOARD_BRAINWAVE_PRO 85 // Brainwave Pro (AT90USB1286) #define BOARD_GEN3_PLUS 9 // Gen3+ #define BOARD_GEN3_MONOLITHIC 22 // Gen3 Monolithic Electronics @@ -100,6 +101,28 @@ #define BOARD_BAM_DICE_DUE 402 // 2PrintBeta BAM&DICE Due with STK drivers #define BOARD_BQ_ZUM_MEGA_3D 503 // bq ZUM Mega 3D #define BOARD_ZRIB_V20 504 // zrib V2.0 control board (Chinese knock off RAMPS replica) +//ARM 32 +#define BOARD_DUE3DOM 1411 // DUE3DOM for Arduino DUE +#define BOARD_DUE3DOM_MINI 1412 // DUE3DOM MINI for Arduino DUE +#define BOARD_RADDS 1502 // RADDS +#define BOARD_RAMPS_FD_V1 1503 // RAMPS-FD v1 +#define BOARD_RAMPS_FD_V2 1504 // RAMPS-FD v2 +#define BOARD_RAMPS_SMART_EFB 1523 // RAMPS-SMART (Power outputs: Hotend, Fan, Bed) +#define BOARD_RAMPS_SMART_EEB 1524 // RAMPS-SMART (Power outputs: Hotend0, Hotend1, Bed) +#define BOARD_RAMPS_SMART_EFF 1525 // RAMPS-SMART (Power outputs: Hotend, Fan0, Fan1) +#define BOARD_RAMPS_SMART_EEF 1526 // RAMPS-SMART (Power outputs: Hotend0, Hotend1, Fan) +#define BOARD_RAMPS_SMART_SF 1528 // RAMPS-SMART (Power outputs: Spindle, Controller Fan) +#define BOARD_RAMPS_DUO_EFB 1533 // RAMPS Duo (Power outputs: Hotend, Fan, Bed) +#define BOARD_RAMPS_DUO_EEB 1534 // RAMPS Duo (Power outputs: Hotend0, Hotend1, Bed) +#define BOARD_RAMPS_DUO_EFF 1535 // RAMPS Duo (Power outputs: Hotend, Fan0, Fan1) +#define BOARD_RAMPS_DUO_EEF 1536 // RAMPS Duo (Power outputs: Hotend0, Hotend1, Fan) +#define BOARD_RAMPS_DUO_SF 1538 // RAMPS Duo (Power outputs: Spindle, Controller Fan) +#define BOARD_RAMPS4DUE_EFB 1543 // RAMPS4DUE (Power outputs: Hotend, Fan, Bed) +#define BOARD_RAMPS4DUE_EEB 1544 // RAMPS4DUE (Power outputs: Hotend0, Hotend1, Bed) +#define BOARD_RAMPS4DUE_EFF 1545 // RAMPS4DUE (Power outputs: Hotend, Fan0, Fan1) +#define BOARD_RAMPS4DUE_EEF 1546 // RAMPS4DUE (Power outputs: Hotend0, Hotend1, Fan) +#define BOARD_RAMPS4DUE_SF 1548 // RAMPS4DUE (Power outputs: Spindle, Controller Fan) +#define BOARD_ALLIGATOR 1602 // Alligator Board R2 #define MB(board) (MOTHERBOARD==BOARD_##board) diff --git a/Marlin/buzzer.h b/Marlin/buzzer.h index 530b729683..ef183ead44 100644 --- a/Marlin/buzzer.h +++ b/Marlin/buzzer.h @@ -24,7 +24,6 @@ #define __BUZZER_H__ #include "types.h" -#include "fastio.h" #include "circularqueue.h" #include "temperature.h" diff --git a/Marlin/circularqueue.h b/Marlin/circularqueue.h index 9aafb99aca..d10e79bac9 100644 --- a/Marlin/circularqueue.h +++ b/Marlin/circularqueue.h @@ -23,7 +23,7 @@ #ifndef __CIRCULARQUEUE_H__ #define __CIRCULARQUEUE_H__ -#include +#include /** * @brief Circular Queue class diff --git a/Marlin/configuration_store.cpp b/Marlin/configuration_store.cpp index 5ebbe85fb5..d90cefdb7b 100644 --- a/Marlin/configuration_store.cpp +++ b/Marlin/configuration_store.cpp @@ -252,12 +252,14 @@ void MarlinSettings::postprocess() { } #if ENABLED(EEPROM_SETTINGS) + #include "src/HAL/persistent_store_api.h" #define DUMMY_PID_VALUE 3000.0f - #define EEPROM_START() int eeprom_index = EEPROM_OFFSET + #define EEPROM_START() int eeprom_index = EEPROM_OFFSET; HAL::PersistentStore::access_start() + #define EEPROM_FINISH() HAL::PersistentStore::access_finish() #define EEPROM_SKIP(VAR) eeprom_index += sizeof(VAR) - #define EEPROM_WRITE(VAR) write_data(eeprom_index, (uint8_t*)&VAR, sizeof(VAR), &working_crc) - #define EEPROM_READ(VAR) read_data(eeprom_index, (uint8_t*)&VAR, sizeof(VAR), &working_crc) + #define EEPROM_WRITE(VAR) HAL::PersistentStore::write_data(eeprom_index, (uint8_t*)&VAR, sizeof(VAR), &working_crc) + #define EEPROM_READ(VAR) HAL::PersistentStore::read_data(eeprom_index, (uint8_t*)&VAR, sizeof(VAR), &working_crc) #define EEPROM_ASSERT(TST,ERR) if (!(TST)) do{ SERIAL_ERROR_START(); SERIAL_ERRORLNPGM(ERR); eeprom_read_error = true; }while(0) const char version[4] = EEPROM_VERSION; @@ -268,39 +270,6 @@ void MarlinSettings::postprocess() { int MarlinSettings::meshes_begin; #endif - void MarlinSettings::write_data(int &pos, const uint8_t *value, uint16_t size, uint16_t *crc) { - if (eeprom_error) return; - while (size--) { - uint8_t * const p = (uint8_t * const)pos; - uint8_t v = *value; - // EEPROM has only ~100,000 write cycles, - // so only write bytes that have changed! - if (v != eeprom_read_byte(p)) { - eeprom_write_byte(p, v); - if (eeprom_read_byte(p) != v) { - SERIAL_ECHO_START(); - SERIAL_ECHOLNPGM(MSG_ERR_EEPROM_WRITE); - eeprom_error = true; - return; - } - } - crc16(crc, &v, 1); - pos++; - value++; - }; - } - - void MarlinSettings::read_data(int &pos, uint8_t* value, uint16_t size, uint16_t *crc) { - if (eeprom_error) return; - do { - uint8_t c = eeprom_read_byte((unsigned char*)pos); - *value = c; - crc16(crc, &c, 1); - pos++; - value++; - } while (--size); - } - /** * M500 - Store Configuration */ @@ -668,7 +637,7 @@ void MarlinSettings::postprocess() { if (ubl.state.storage_slot >= 0) store_mesh(ubl.state.storage_slot); #endif - + EEPROM_FINISH(); return !eeprom_error; } @@ -1067,6 +1036,7 @@ void MarlinSettings::postprocess() { #if ENABLED(EEPROM_CHITCHAT) && DISABLED(DISABLE_M503) report(); #endif + EEPROM_FINISH(); return !eeprom_error; } @@ -1107,7 +1077,7 @@ void MarlinSettings::postprocess() { uint16_t crc = 0; int pos = meshes_end - (slot + 1) * sizeof(ubl.z_values); - write_data(pos, (uint8_t *)&ubl.z_values, sizeof(ubl.z_values), &crc); + HAL::PersistentStore::write_data(pos, (uint8_t *)&ubl.z_values, sizeof(ubl.z_values), &crc); // Write crc to MAT along with other data, or just tack on to the beginning or end @@ -1138,7 +1108,7 @@ void MarlinSettings::postprocess() { uint16_t crc = 0; int pos = meshes_end - (slot + 1) * sizeof(ubl.z_values); uint8_t * const dest = into ? (uint8_t*)into : (uint8_t*)&ubl.z_values; - read_data(pos, dest, sizeof(ubl.z_values), &crc); + HAL::PersistentStore::read_data(pos, dest, sizeof(ubl.z_values), &crc); // Compare crc with crc from MAT, or read from end diff --git a/Marlin/configuration_store.h b/Marlin/configuration_store.h index 99e9511209..33709bab91 100644 --- a/Marlin/configuration_store.h +++ b/Marlin/configuration_store.h @@ -72,8 +72,6 @@ class MarlinSettings { #endif - static void write_data(int &pos, const uint8_t *value, uint16_t size, uint16_t *crc); - static void read_data(int &pos, uint8_t *value, uint16_t size, uint16_t *crc); #endif }; diff --git a/Marlin/dac_dac084s085.cpp b/Marlin/dac_dac084s085.cpp new file mode 100644 index 0000000000..bca359821b --- /dev/null +++ b/Marlin/dac_dac084s085.cpp @@ -0,0 +1,108 @@ +/*************************************************************** + * + * External DAC for Alligator Board + * + ****************************************************************/ +#include "Marlin.h" + +#if MB(ALLIGATOR) + #include "stepper.h" + #include "dac_dac084s085.h" + + dac084s085::dac084s085() { + return ; + } + + void dac084s085::begin() { + uint8_t externalDac_buf[2] = {0x20,0x00};//all off + + // All SPI chip-select HIGH + pinMode (DAC0_SYNC, OUTPUT); + digitalWrite( DAC0_SYNC , HIGH ); + #if EXTRUDERS > 1 + pinMode (DAC1_SYNC, OUTPUT); + digitalWrite( DAC1_SYNC , HIGH ); + #endif + digitalWrite( SPI_EEPROM1_CS , HIGH ); + digitalWrite( SPI_EEPROM2_CS , HIGH ); + digitalWrite( SPI_FLASH_CS , HIGH ); + digitalWrite( SS_PIN , HIGH ); + spiBegin(); + + //init onboard DAC + delayMicroseconds(2U); + digitalWrite( DAC0_SYNC , LOW ); + delayMicroseconds(2U); + digitalWrite( DAC0_SYNC , HIGH ); + delayMicroseconds(2U); + digitalWrite( DAC0_SYNC , LOW ); + + spiSend(SPI_CHAN_DAC,externalDac_buf , 2); + digitalWrite( DAC0_SYNC , HIGH ); + + #if EXTRUDERS > 1 + //init Piggy DAC + delayMicroseconds(2U); + digitalWrite( DAC1_SYNC , LOW ); + delayMicroseconds(2U); + digitalWrite( DAC1_SYNC , HIGH ); + delayMicroseconds(2U); + digitalWrite( DAC1_SYNC , LOW ); + + spiSend(SPI_CHAN_DAC,externalDac_buf , 2); + digitalWrite( DAC1_SYNC , HIGH ); + #endif + + return; + } + + void dac084s085::setValue(uint8_t channel, uint8_t value) { + if(channel >= 7) // max channel (X,Y,Z,E0,E1,E2,E3) + return; + if(value > 255) value = 255; + + uint8_t externalDac_buf[2] = {0x10,0x00}; + + if(channel > 3) + externalDac_buf[0] |= (7 - channel << 6); + else + externalDac_buf[0] |= (3 - channel << 6); + + externalDac_buf[0] |= (value>>4); + externalDac_buf[1] |= (value<<4); + + // All SPI chip-select HIGH + digitalWrite( DAC0_SYNC , HIGH ); + #if EXTRUDERS > 1 + digitalWrite( DAC1_SYNC , HIGH ); + #endif + digitalWrite( SPI_EEPROM1_CS , HIGH ); + digitalWrite( SPI_EEPROM2_CS , HIGH ); + digitalWrite( SPI_FLASH_CS , HIGH ); + digitalWrite( SS_PIN , HIGH ); + + if(channel > 3) { // DAC Piggy E1,E2,E3 + + digitalWrite(DAC1_SYNC , LOW); + delayMicroseconds(2U); + digitalWrite(DAC1_SYNC , HIGH); + delayMicroseconds(2U); + digitalWrite(DAC1_SYNC , LOW); + } + + else { // DAC onboard X,Y,Z,E0 + + digitalWrite(DAC0_SYNC , LOW); + delayMicroseconds(2U); + digitalWrite(DAC0_SYNC , HIGH); + delayMicroseconds(2U); + digitalWrite(DAC0_SYNC , LOW); + } + + delayMicroseconds(2U); + spiSend(SPI_CHAN_DAC,externalDac_buf , 2); + + return; + } + +#endif diff --git a/Marlin/dac_dac084s085.h b/Marlin/dac_dac084s085.h new file mode 100644 index 0000000000..797103ce19 --- /dev/null +++ b/Marlin/dac_dac084s085.h @@ -0,0 +1,11 @@ +#ifndef dac084s085_h +#define dac084s085_h + +class dac084s085 { + public: + dac084s085(); + static void begin(void); + static void setValue(uint8_t channel, uint8_t value); +}; + +#endif //dac084s085_h diff --git a/Marlin/hex_print_routines.cpp b/Marlin/hex_print_routines.cpp index 65b97fc18c..4c6d3b5881 100644 --- a/Marlin/hex_print_routines.cpp +++ b/Marlin/hex_print_routines.cpp @@ -43,7 +43,7 @@ char* hex_word(const uint16_t w) { } char* hex_address(const void * const w) { - (void)hex_word((uint16_t)w); + (void)hex_word((int)w); return _hex; } diff --git a/Marlin/macros.h b/Marlin/macros.h index 3b79ba9b83..dd5ca4f474 100644 --- a/Marlin/macros.h +++ b/Marlin/macros.h @@ -36,11 +36,6 @@ #define _O2 __attribute__((optimize("O2"))) #define _O3 __attribute__((optimize("O3"))) -// Bracket code that shouldn't be interrupted -#ifndef CRITICAL_SECTION_START - #define CRITICAL_SECTION_START unsigned char _sreg = SREG; cli(); - #define CRITICAL_SECTION_END SREG = _sreg; -#endif // Clock speed factors #define CYCLES_PER_MICROSECOND (F_CPU / 1000000L) // 16 or 20 diff --git a/Marlin/pins.h b/Marlin/pins.h index fbf2331da1..194172e892 100644 --- a/Marlin/pins.h +++ b/Marlin/pins.h @@ -231,6 +231,72 @@ #elif MB(5DPRINT) #include "pins_5DPRINT.h" // AT90USB1286 +// +// 32-bit Boards +// + +#elif MB(TEENSY35_36) + #include "pins_TEENSY35_36.h" +#elif MB(DUE3DOM) + #include "pins_DUE3DOM.h" +#elif MB(DUE3DOM_MINI) + #include "pins_DUE3DOM_MINI.h" +#elif MB(RADDS) + #include "pins_RADDS.h" +#elif MB(RAMPS_FD_V1) + #include "pins_RAMPS_FD.h" +#elif MB(RAMPS_FD_V2) + #include "pins_RAMPS_FD_V2.h" +#elif MB(RAMPS_SMART_EFB) + #define IS_RAMPS_EFB + #include "pins_RAMPS_SMART.h" +#elif MB(RAMPS_SMART_EEB) + #define IS_RAMPS_EEB + #include "pins_RAMPS_SMART.h" +#elif MB(RAMPS_SMART_EFF) + #define IS_RAMPS_EFF + #include "pins_RAMPS_SMART.h" +#elif MB(RAMPS_SMART_EEF) + #define IS_RAMPS_EEF + #include "pins_RAMPS_SMART.h" +#elif MB(RAMPS_SMART_SF) + #define IS_RAMPS_SF + #include "pins_RAMPS_SMART.h" +#elif MB(RAMPS_DUO_EFB) + #define IS_RAMPS_EFB + #include "pins_RAMPS_DUO.h" +#elif MB(RAMPS_DUO_EEB) + #define IS_RAMPS_EEB + #include "pins_RAMPS_DUO.h" +#elif MB(RAMPS_DUO_EFF) + #define IS_RAMPS_EFF + #include "pins_RAMPS_DUO.h" +#elif MB(RAMPS_DUO_EEF) + #define IS_RAMPS_EEF + #include "pins_RAMPS_DUO.h" +#elif MB(RAMPS_DUO_SF) + #define IS_RAMPS_SF + #include "pins_RAMPS_DUO.h" +#elif MB(RAMPS4DUE_EFB) + #define IS_RAMPS_EFB + #include "pins_RAMPS4DUE.h" +#elif MB(RAMPS4DUE_EEB) + #define IS_RAMPS_EEB + #include "pins_RAMPS4DUE.h" +#elif MB(RAMPS4DUE_EFF) + #define IS_RAMPS_EFF + #include "pins_RAMPS4DUE.h" +#elif MB(RAMPS4DUE_EEF) + #define IS_RAMPS_EEF + #include "pins_RAMPS4DUE.h" +#elif MB(RAMPS4DUE_SF) + #define IS_RAMPS_SF + #include "pins_RAMPS4DUE.h" +#elif MB(ALLIGATOR) + #include "pins_ALLIGATOR_R2.h" +#elif MB(RAMPS_FD_V1) || MB(RAMPS_FD_V2) + #include "pins_RAMPS_FD_v1.h" + #else #error "Unknown MOTHERBOARD value set in Configuration.h" #endif @@ -606,47 +672,9 @@ #define HAS_DIGIPOTSS (PIN_EXISTS(DIGIPOTSS)) -/** - * Define SPI Pins: SCK, MISO, MOSI, SS - */ -#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328__) || defined(__AVR_ATmega328P__) - #define AVR_SCK_PIN 13 - #define AVR_MISO_PIN 12 - #define AVR_MOSI_PIN 11 - #define AVR_SS_PIN 10 -#elif defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644PA__) || defined(__AVR_ATmega1284P__) - #define AVR_SCK_PIN 7 - #define AVR_MISO_PIN 6 - #define AVR_MOSI_PIN 5 - #define AVR_SS_PIN 4 -#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) - #define AVR_SCK_PIN 52 - #define AVR_MISO_PIN 50 - #define AVR_MOSI_PIN 51 - #define AVR_SS_PIN 53 -#elif defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) - #define AVR_SCK_PIN 21 - #define AVR_MISO_PIN 23 - #define AVR_MOSI_PIN 22 - #define AVR_SS_PIN 20 -#elif defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__) - #define AVR_SCK_PIN 10 - #define AVR_MISO_PIN 12 - #define AVR_MOSI_PIN 11 - #define AVR_SS_PIN 16 -#endif +// Note: default SPI pins are defined in the HAL + +#include "src/HAL/HAL_spi_pins.h" -#ifndef SCK_PIN - #define SCK_PIN AVR_SCK_PIN -#endif -#ifndef MISO_PIN - #define MISO_PIN AVR_MISO_PIN -#endif -#ifndef MOSI_PIN - #define MOSI_PIN AVR_MOSI_PIN -#endif -#ifndef SS_PIN - #define SS_PIN AVR_SS_PIN -#endif #endif // __PINS_H__ diff --git a/Marlin/pins_RAMPS.h b/Marlin/pins_RAMPS.h index 9b18461137..dd3cdef9c8 100644 --- a/Marlin/pins_RAMPS.h +++ b/Marlin/pins_RAMPS.h @@ -44,8 +44,10 @@ * 7 | 11 */ -#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__) - #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu." +#if !defined(IS_RAMPS_SMART) && !defined(IS_RAMPS_DUO) && !defined(IS_RAMPS4DUE) + #if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__) + #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu." + #endif #endif #ifndef BOARD_NAME diff --git a/Marlin/planner.cpp b/Marlin/planner.cpp index 349e8affde..5f93c6d8a2 100644 --- a/Marlin/planner.cpp +++ b/Marlin/planner.cpp @@ -1222,7 +1222,7 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const } block->acceleration_steps_per_s2 = accel; block->acceleration = accel / steps_per_mm; - block->acceleration_rate = (long)(accel * 16777216.0 / ((F_CPU) * 0.125)); // * 8.388608 + block->acceleration_rate = (long)(accel * 16777216.0 / (HAL_STEPPER_TIMER_RATE)); // 16777216 = <<24 // Initial limit on the segment entry velocity float vmax_junction; diff --git a/Marlin/printcounter.h b/Marlin/printcounter.h index 0eeded9d5a..e5c2908392 100644 --- a/Marlin/printcounter.h +++ b/Marlin/printcounter.h @@ -26,8 +26,6 @@ #include "macros.h" #include "language.h" #include "stopwatch.h" -#include - // Print debug messages with M111 S2 //#define DEBUG_PRINTCOUNTER @@ -51,8 +49,14 @@ class PrintCounter: public Stopwatch { * @brief EEPROM address * @details Defines the start offset address where the data is stored. */ - const uint16_t address = 0x32; - + #if ENABLED(I2C_EEPROM) || ENABLED(SPI_EEPROM) + // round up address to next page boundary (assuming 32 byte pages) + const uint32_t address = 0x40; + #elif defined(CPU_32_BIT) + const uint32_t address = 0x32; + #else + const uint16_t address = 0x32; + #endif /** * @brief Interval in seconds between counter updates * @details This const value defines what will be the time between each diff --git a/Marlin/spi.h b/Marlin/private_spi.h similarity index 95% rename from Marlin/spi.h rename to Marlin/private_spi.h index c4b86005ad..45cab24435 100644 --- a/Marlin/spi.h +++ b/Marlin/private_spi.h @@ -20,8 +20,8 @@ * */ -#ifndef __SPI_H__ -#define __SPI_H__ +#ifndef __PRIVATE_SPI_H__ +#define __PRIVATE_SPI_H__ #include #include "softspi.h" @@ -54,4 +54,4 @@ class SPI { }; -#endif // __SPI_H__ +#endif // __PRIVATE_SPI_H__ diff --git a/Marlin/serial.h b/Marlin/serial.h index 8be90c06a5..f23d9f7a1a 100644 --- a/Marlin/serial.h +++ b/Marlin/serial.h @@ -23,20 +23,26 @@ #ifndef __SERIAL_H__ #define __SERIAL_H__ -#include "MarlinConfig.h" +#include "src/HAL/HAL.h" -#ifdef USBCON - #include "HardwareSerial.h" - #if ENABLED(BLUETOOTH) - #define MYSERIAL bluetoothSerial +//todo: HAL: breaks encapsulation +// For AVR only, define a serial interface based on configuration +#ifdef ARDUINO_ARCH_AVR + #ifdef USBCON + #include "HardwareSerial.h" + #if ENABLED(BLUETOOTH) + #define MYSERIAL bluetoothSerial + #else + #define MYSERIAL Serial + #endif // BLUETOOTH #else - #define MYSERIAL Serial - #endif // BLUETOOTH -#else - #include "MarlinSerial.h" - #define MYSERIAL customizedSerial + #include "src/HAL/HAL_AVR/MarlinSerial.h" + #define MYSERIAL customizedSerial + #endif #endif +#include "MarlinConfig.h" + extern const char echomagic[] PROGMEM; extern const char errormagic[] PROGMEM; diff --git a/Marlin/src/HAL/HAL.h b/Marlin/src/HAL/HAL.h new file mode 100644 index 0000000000..5d076ac568 --- /dev/null +++ b/Marlin/src/HAL/HAL.h @@ -0,0 +1,94 @@ +/* ************************************************************************** + + Marlin 3D Printer Firmware + Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +****************************************************************************/ + +/** + * Description: HAL wrapper + * + * Supports platforms : + * ARDUINO_ARCH_SAM : For Arduino Due and other boards based on Atmel SAM3X8E + * ARDUINO_ARCH_AVR : For all Atmel AVR boards + */ + +#ifndef _HAL_H +#define _HAL_H + +#include + +/** + * SPI speed where 0 <= index <= 6 + * + * Approximate rates : + * + * 0 : 8 - 10 MHz + * 1 : 4 - 5 MHz + * 2 : 2 - 2.5 MHz + * 3 : 1 - 1.25 MHz + * 4 : 500 - 625 kHz + * 5 : 250 - 312 kHz + * 6 : 125 - 156 kHz + * + * On AVR, actual speed is F_CPU/2^(1 + index). + * On other platforms, speed should be in range given above where possible. + */ + +/** Set SCK to max rate */ +uint8_t const SPI_FULL_SPEED = 0; +/** Set SCK rate to half max rate. */ +uint8_t const SPI_HALF_SPEED = 1; +/** Set SCK rate to quarter max rate. */ +uint8_t const SPI_QUARTER_SPEED = 2; +/** Set SCK rate to 1/8 max rate. */ +uint8_t const SPI_EIGHTH_SPEED = 3; +/** Set SCK rate to 1/16 of max rate. */ +uint8_t const SPI_SIXTEENTH_SPEED = 4; +/** Set SCK rate to 1/32 of max rate. */ +uint8_t const SPI_SPEED_5 = 5; +/** Set SCK rate to 1/64 of max rate. */ +uint8_t const SPI_SPEED_6 = 6; + +// Standard SPI functions +/** Initialise SPI bus */ +void spiBegin(void); +/** Configure SPI for specified SPI speed */ +void spiInit(uint8_t spiRate); +/** Write single byte to SPI */ +void spiSend(uint8_t b); +/** Read single byte from SPI */ +uint8_t spiRec(void); +/** Read from SPI into buffer */ +void spiRead(uint8_t* buf, uint16_t nbyte); +/** Write token and then write from 512 byte buffer to SPI (for SD card) */ +void spiSendBlock(uint8_t token, const uint8_t* buf); + +#ifdef ARDUINO_ARCH_AVR + #include "HAL_AVR/HAL_AVR.h" +#elif defined(ARDUINO_ARCH_SAM) + #define CPU_32_BIT + #include "HAL_DUE/HAL_Due.h" + #include "math_32bit.h" +#elif defined(__MK64FX512__) || defined(__MK66FX1M0__) + #define CPU_32_BIT + #include "HAL_TEENSY35_36/HAL_Teensy.h" + #include "math_32bit.h" +#else + #error Unsupported Platform! +#endif + +#endif /* HAL_H_ */ diff --git a/Marlin/src/HAL/HAL_AVR/HAL_AVR.cpp b/Marlin/src/HAL/HAL_AVR/HAL_AVR.cpp new file mode 100644 index 0000000000..c572b2ccab --- /dev/null +++ b/Marlin/src/HAL/HAL_AVR/HAL_AVR.cpp @@ -0,0 +1,100 @@ +/* ************************************************************************** + + Marlin 3D Printer Firmware + Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + + Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . + +****************************************************************************/ + +/** + * Description: HAL for AVR + * + * For ARDUINO_ARCH_AVR + */ + + +#ifdef ARDUINO_ARCH_AVR + +// -------------------------------------------------------------------------- +// Includes +// -------------------------------------------------------------------------- + +#include "../HAL.h" +#include "../../../macros.h" + +// -------------------------------------------------------------------------- +// Externals +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Local defines +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Types +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Variables +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Public Variables +// -------------------------------------------------------------------------- + +//uint8_t MCUSR; + +// -------------------------------------------------------------------------- +// Private Variables +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Function prototypes +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Private functions +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Public functions +// -------------------------------------------------------------------------- + +#if ENABLED(SDSUPPORT) + #include "../../../SdFatUtil.h" + int freeMemory() { return SdFatUtil::FreeRam(); } +#else + +extern "C" { + extern char __bss_end; + extern char __heap_start; + extern void* __brkval; + + int freeMemory() { + int free_memory; + if ((int)__brkval == 0) + free_memory = ((int)&free_memory) - ((int)&__bss_end); + else + free_memory = ((int)&free_memory) - ((int)__brkval); + return free_memory; + } +} + +#endif //!SDSUPPORT + +#endif + diff --git a/Marlin/src/HAL/HAL_AVR/HAL_AVR.h b/Marlin/src/HAL/HAL_AVR/HAL_AVR.h new file mode 100644 index 0000000000..008f80f5fa --- /dev/null +++ b/Marlin/src/HAL/HAL_AVR/HAL_AVR.h @@ -0,0 +1,160 @@ +/* ************************************************************************** + + Marlin 3D Printer Firmware + Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + + Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +****************************************************************************/ + +/** + * Description: HAL for AVR + * + * For ARDUINO_ARCH_AVR + */ + + +#ifndef _HAL_AVR_H +#define _HAL_AVR_H + +// -------------------------------------------------------------------------- +// Includes +// -------------------------------------------------------------------------- + +#include + +#include "Arduino.h" + +#include +#include +#include +#include +#include + +#include "fastio_AVR.h" +#include "watchdog_AVR.h" +#include "math_AVR.h" + +// -------------------------------------------------------------------------- +// Defines +// -------------------------------------------------------------------------- + +//#define analogInputToDigitalPin(IO) IO + +#ifndef CRITICAL_SECTION_START + #define CRITICAL_SECTION_START unsigned char _sreg = SREG; cli(); + #define CRITICAL_SECTION_END SREG = _sreg; +#endif + + +// On AVR this is in math.h? +//#define square(x) ((x)*(x)) + +// -------------------------------------------------------------------------- +// Types +// -------------------------------------------------------------------------- + +#define HAL_TIMER_TYPE uint16_t +#define HAL_TIMER_TYPE_MAX 0xFFFF + +#define HAL_SERVO_LIB Servo + +// -------------------------------------------------------------------------- +// Public Variables +// -------------------------------------------------------------------------- + +//extern uint8_t MCUSR; + +// -------------------------------------------------------------------------- +// Public functions +// -------------------------------------------------------------------------- + +//void cli(void); + +//void _delay_ms(int delay); + +inline void HAL_clear_reset_source(void) { MCUSR = 0; } +inline uint8_t HAL_get_reset_source(void) { return MCUSR; } + +extern "C" { + int freeMemory(void); +} + +// eeprom +//void eeprom_write_byte(unsigned char *pos, unsigned char value); +//unsigned char eeprom_read_byte(unsigned char *pos); + + +// timers +#define STEP_TIMER_NUM OCR1A +#define TEMP_TIMER_NUM 0 +#define TEMP_TIMER_FREQUENCY (F_CPU / 64.0 / 256.0) + +#define HAL_TIMER_RATE ((F_CPU) / 8.0) +#define HAL_STEPPER_TIMER_RATE HAL_TIMER_RATE +#define STEPPER_TIMER_PRESCALE INT0_PRESCALER + +#define ENABLE_STEPPER_DRIVER_INTERRUPT() SBI(TIMSK1, OCIE1A) +#define DISABLE_STEPPER_DRIVER_INTERRUPT() CBI(TIMSK1, OCIE1A) + +#define ENABLE_TEMPERATURE_INTERRUPT() SBI(TIMSK0, OCIE0B) +#define DISABLE_TEMPERATURE_INTERRUPT() CBI(TIMSK0, OCIE0B) + +//void HAL_timer_start (uint8_t timer_num, uint32_t frequency); +#define HAL_timer_start (timer_num,frequency) + +//void HAL_timer_set_count (uint8_t timer_num, uint16_t count); +#define HAL_timer_set_count(timer,count) timer = (count) + +#define HAL_timer_get_current_count(timer) timer + +//void HAL_timer_isr_prologue (uint8_t timer_num); +#define HAL_timer_isr_prologue(timer_num) + +#define HAL_STEP_TIMER_ISR ISR(TIMER1_COMPA_vect) +#define HAL_TEMP_TIMER_ISR ISR(TIMER0_COMPB_vect) + +#define HAL_ENABLE_ISRs() do { cli(); if (thermalManager.in_temp_isr)DISABLE_TEMPERATURE_INTERRUPT(); else ENABLE_TEMPERATURE_INTERRUPT(); ENABLE_STEPPER_DRIVER_INTERRUPT(); } while(0) + +// ADC +#ifdef DIDR2 + #define HAL_ANALOG_SELECT(pin) do{ if (pin < 8) SBI(DIDR0, pin); else SBI(DIDR2, pin - 8); }while(0) +#else + #define HAL_ANALOG_SELECT(pin) do{ SBI(DIDR0, pin); }while(0) +#endif + +inline void HAL_adc_init(void) { + ADCSRA = _BV(ADEN) | _BV(ADSC) | _BV(ADIF) | 0x07; + DIDR0 = 0; + #ifdef DIDR2 + DIDR2 = 0; + #endif +} + +#define SET_ADMUX_ADCSRA(pin) ADMUX = _BV(REFS0) | (pin & 0x07); SBI(ADCSRA, ADSC) +#ifdef MUX5 + #define HAL_START_ADC(pin) if (pin > 7) ADCSRB = _BV(MUX5); else ADCSRB = 0; SET_ADMUX_ADCSRA(pin) +#else + #define HAL_START_ADC(pin) ADCSRB = 0; SET_ADMUX_ADCSRA(pin) +#endif + +#define HAL_READ_ADC ADC + + +// -------------------------------------------------------------------------- +// +// -------------------------------------------------------------------------- + +#endif // _HAL_AVR_H diff --git a/Marlin/pinsDebug.h b/Marlin/src/HAL/HAL_AVR/HAL_pinsDebug_AVR.h similarity index 96% rename from Marlin/pinsDebug.h rename to Marlin/src/HAL/HAL_AVR/HAL_pinsDebug_AVR.h index 56f0916d20..51108196a1 100644 --- a/Marlin/pinsDebug.h +++ b/Marlin/src/HAL/HAL_AVR/HAL_pinsDebug_AVR.h @@ -20,6 +20,16 @@ * */ +#ifndef HAL_PINSDEBUG_AVR_H + +void HAL_print_analog_pin(char buffer[], int8_t pin) { + sprintf(buffer, "(A%2d) ", int(pin - analogInputToDigitalPin(0))); +} + +void HAL_analog_pin_state(char buffer[], int8_t pin) { + sprintf(buffer, "Analog in =% 5d", analogRead(pin - analogInputToDigitalPin(0))); +} + bool endstop_monitor_flag = false; #define NAME_FORMAT "%-35s" // one place to specify the format of all the sources of names @@ -46,7 +56,7 @@ bool endstop_monitor_flag = false; #define REPORT_NAME_DIGITAL(NAME, COUNTER) _ADD_PIN(#NAME, COUNTER) #define REPORT_NAME_ANALOG(NAME, COUNTER) _ADD_PIN(#NAME, COUNTER) -#include "pinsDebug_list.h" +#include "../../../pinsDebug_list.h" #line 51 // manually add pins that have names that are macros which don't play well with these macros @@ -97,7 +107,7 @@ const PinInfo pin_array[] PROGMEM = { #endif #endif - #include "pinsDebug_list.h" + #include "../../../pinsDebug_list.h" #line 102 }; @@ -146,7 +156,7 @@ const PinInfo pin_array[] PROGMEM = { * Print a pin's PWM status. * Return true if it's currently a PWM pin. */ -static bool pwm_status(uint8_t pin) { +static bool HAL_pwm_status(uint8_t pin) { char buffer[20]; // for the sprintf statements switch (digitalPinToTimer_DEBUG(pin)) { @@ -338,7 +348,7 @@ void timer_prefix(uint8_t T, char L, uint8_t N) { // T - timer L - pwm N - if (TEST(*TMSK, TOIE)) err_prob_interrupt(); } -static void pwm_details(uint8_t pin) { +static void HAL_pwm_details(uint8_t pin) { switch (digitalPinToTimer_DEBUG(pin)) { #if defined(TCCR0A) && defined(COM0A1) @@ -514,7 +524,7 @@ inline void report_pin_state_extended(int8_t pin, bool ignore, bool extended = f print_input_or_output(false); SERIAL_PROTOCOL(digitalRead_mod(pin)); } - else if (pwm_status(pin)) { + else if (HAL_pwm_status(pin)) { // do nothing } else { @@ -522,7 +532,7 @@ inline void report_pin_state_extended(int8_t pin, bool ignore, bool extended = f SERIAL_PROTOCOL(digitalRead_mod(pin)); } } - if (!multi_name_pin && extended) pwm_details(pin); // report PWM capabilities only on the first pass & only if doing an extended report + if (!multi_name_pin && extended) HAL_pwm_details(pin); // report PWM capabilities only on the first pass & only if doing an extended report } } } @@ -581,3 +591,5 @@ inline void report_pin_state_extended(int8_t pin, bool ignore, bool extended = f SERIAL_EOL(); } } + +#endif //HAL_PINSDEBUG_AVR_H \ No newline at end of file diff --git a/Marlin/src/HAL/HAL_AVR/HAL_spi_AVR.cpp b/Marlin/src/HAL/HAL_AVR/HAL_spi_AVR.cpp new file mode 100644 index 0000000000..128e73555c --- /dev/null +++ b/Marlin/src/HAL/HAL_AVR/HAL_spi_AVR.cpp @@ -0,0 +1,213 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Originally from Arduino Sd2Card Library + * Copyright (C) 2009 by William Greiman + */ + +/** + * Description: HAL for AVR - SPI functions + * + * For ARDUINO_ARCH_AVR + */ + +#ifdef ARDUINO_ARCH_AVR + +// -------------------------------------------------------------------------- +// Includes +// -------------------------------------------------------------------------- + +#include "../../../MarlinConfig.h" + +// -------------------------------------------------------------------------- +// Public Variables +// -------------------------------------------------------------------------- + + +// -------------------------------------------------------------------------- +// Public functions +// -------------------------------------------------------------------------- + +void spiBegin (void) { + SET_OUTPUT(SS_PIN); + WRITE(SS_PIN, HIGH); + SET_OUTPUT(SCK_PIN); + SET_INPUT(MISO_PIN); + SET_OUTPUT(MOSI_PIN); + + #if DISABLED(SOFTWARE_SPI) + // SS must be in output mode even it is not chip select + SET_OUTPUT(SS_PIN); + // set SS high - may be chip select for another SPI device + #if SET_SPI_SS_HIGH + WRITE(SS_PIN, HIGH); + #endif // SET_SPI_SS_HIGH + // set a default rate + spiInit(1); + #endif // SOFTWARE_SPI +} + + +//------------------------------------------------------------------------------ +#if DISABLED(SOFTWARE_SPI) + // functions for hardware SPI + //------------------------------------------------------------------------------ + // make sure SPCR rate is in expected bits + #if (SPR0 != 0 || SPR1 != 1) + #error "unexpected SPCR bits" + #endif + + /** + * Initialize hardware SPI + * Set SCK rate to F_CPU/pow(2, 1 + spiRate) for spiRate [0,6] + */ + void spiInit(uint8_t spiRate) { + // See avr processor documentation + CBI( + #ifdef PRR + PRR + #elif defined(PRR0) + PRR0 + #endif + , PRSPI); + + SPCR = _BV(SPE) | _BV(MSTR) | (spiRate >> 1); + SPSR = spiRate & 1 || spiRate == 6 ? 0 : _BV(SPI2X); + } + //------------------------------------------------------------------------------ + /** SPI receive a byte */ + uint8_t spiRec(void) { + SPDR = 0XFF; + while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ } + return SPDR; + } + //------------------------------------------------------------------------------ + /** SPI read data */ + void spiRead(uint8_t* buf, uint16_t nbyte) { + if (nbyte-- == 0) return; + SPDR = 0XFF; + for (uint16_t i = 0; i < nbyte; i++) { + while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ } + buf[i] = SPDR; + SPDR = 0XFF; + } + while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ } + buf[nbyte] = SPDR; + } + //------------------------------------------------------------------------------ + /** SPI send a byte */ + void spiSend(uint8_t b) { + SPDR = b; + while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ } + } + //------------------------------------------------------------------------------ + /** SPI send block */ + void spiSendBlock(uint8_t token, const uint8_t* buf) { + SPDR = token; + for (uint16_t i = 0; i < 512; i += 2) { + while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ } + SPDR = buf[i]; + while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ } + SPDR = buf[i + 1]; + } + while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ } + } + //------------------------------------------------------------------------------ +#else // SOFTWARE_SPI + //------------------------------------------------------------------------------ + /** nop to tune soft SPI timing */ + #define nop asm volatile ("\tnop\n") + + /** Set SPI rate */ + void spiInit(uint8_t spiRate) { + // nothing to do + UNUSED(spiRate); + } + + //------------------------------------------------------------------------------ + /** Soft SPI receive byte */ + uint8_t spiRec() { + uint8_t data = 0; + // no interrupts during byte receive - about 8 us + cli(); + // output pin high - like sending 0XFF + WRITE(MOSI_PIN, HIGH); + + for (uint8_t i = 0; i < 8; i++) { + WRITE(SCK_PIN, HIGH); + + // adjust so SCK is nice + nop; + nop; + + data <<= 1; + + if (READ(MISO_PIN)) data |= 1; + + WRITE(SCK_PIN, LOW); + } + // enable interrupts + sei(); + return data; + } + //------------------------------------------------------------------------------ + /** Soft SPI read data */ + void spiRead(uint8_t* buf, uint16_t nbyte) { + for (uint16_t i = 0; i < nbyte; i++) + buf[i] = spiRec(); + } + //------------------------------------------------------------------------------ + /** Soft SPI send byte */ + void spiSend(uint8_t data) { + // no interrupts during byte send - about 8 us + cli(); + for (uint8_t i = 0; i < 8; i++) { + WRITE(SCK_PIN, LOW); + + WRITE(MOSI_PIN, data & 0X80); + + data <<= 1; + + WRITE(SCK_PIN, HIGH); + } + // hold SCK high for a few ns + nop; + nop; + nop; + nop; + + WRITE(SCK_PIN, LOW); + // enable interrupts + sei(); + } + //------------------------------------------------------------------------------ + /** Soft SPI send block */ + void spiSendBlock(uint8_t token, const uint8_t* buf) { + spiSend(token); + for (uint16_t i = 0; i < 512; i++) + spiSend(buf[i]); + } +#endif // SOFTWARE_SPI + + +#endif // ARDUINO_ARCH_AVR diff --git a/Marlin/MarlinSerial.cpp b/Marlin/src/HAL/HAL_AVR/MarlinSerial.cpp similarity index 99% rename from Marlin/MarlinSerial.cpp rename to Marlin/src/HAL/HAL_AVR/MarlinSerial.cpp index 235e018094..b4f03f5f07 100644 --- a/Marlin/MarlinSerial.cpp +++ b/Marlin/src/HAL/HAL_AVR/MarlinSerial.cpp @@ -28,9 +28,10 @@ * Modified 28 September 2010 by Mark Sproul * Modified 14 February 2016 by Andreas Hardtung (added tx buffer) */ +#ifdef ARDUINO_ARCH_AVR #include "MarlinSerial.h" -#include "Marlin.h" +#include "../../../Marlin.h" // Disable HardwareSerial.cpp to support chips without a UART (Attiny, etc.) @@ -46,8 +47,8 @@ #if ENABLED(EMERGENCY_PARSER) - #include "stepper.h" - #include "language.h" + #include "../../../stepper.h" + #include "../../../language.h" // Currently looking for: M108, M112, M410 // If you alter the parser please don't forget to update the capabilities in Conditionals_post.h @@ -515,3 +516,5 @@ #if defined(USBCON) && ENABLED(BLUETOOTH) HardwareSerial bluetoothSerial; #endif + +#endif diff --git a/Marlin/MarlinSerial.h b/Marlin/src/HAL/HAL_AVR/MarlinSerial.h similarity index 98% rename from Marlin/MarlinSerial.h rename to Marlin/src/HAL/HAL_AVR/MarlinSerial.h index 8456a7237e..cf96330f56 100644 --- a/Marlin/MarlinSerial.h +++ b/Marlin/src/HAL/HAL_AVR/MarlinSerial.h @@ -32,7 +32,9 @@ #ifndef MARLINSERIAL_H #define MARLINSERIAL_H -#include "MarlinConfig.h" +#include "../../../MarlinConfig.h" + +#include #ifndef SERIAL_PORT #define SERIAL_PORT 0 @@ -160,6 +162,7 @@ static void println(unsigned long, int = DEC); static void println(double, int = 2); static void println(void); + operator bool() { return true; } }; extern MarlinSerial customizedSerial; diff --git a/Marlin/src/HAL/HAL_AVR/ServoTimers.h b/Marlin/src/HAL/HAL_AVR/ServoTimers.h new file mode 100644 index 0000000000..231d1a6d26 --- /dev/null +++ b/Marlin/src/HAL/HAL_AVR/ServoTimers.h @@ -0,0 +1,90 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/* + Servo.h - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2 + Copyright (c) 2009 Michael Margolis. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +/* + * Defines for 16 bit timers used with Servo library + * + * If _useTimerX is defined then TimerX is a 16 bit timer on the current board + * timer16_Sequence_t enumerates the sequence that the timers should be allocated + * _Nbr_16timers indicates how many 16 bit timers are available. + */ + +/** + * AVR Only definitions + * -------------------- + */ + +#define TRIM_DURATION 2 // compensation ticks to trim adjust for digitalWrite delays +#define PRESCALER 8 // timer prescaler + +// Say which 16 bit timers can be used and in what order +#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) + //#define _useTimer1 + #define _useTimer3 + #define _useTimer4 + #if !HAS_MOTOR_CURRENT_PWM + #define _useTimer5 // Timer 5 is used for motor current PWM and can't be used for servos. + #endif +#elif defined(__AVR_ATmega32U4__) + #define _useTimer3 +#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__) + #define _useTimer3 +#elif defined(__AVR_ATmega128__) || defined(__AVR_ATmega1281__) || defined(__AVR_ATmega1284P__) || defined(__AVR_ATmega2561__) + #define _useTimer3 +#else + // everything else +#endif + +typedef enum { + #if ENABLED(_useTimer1) + _timer1, + #endif + #if ENABLED(_useTimer3) + _timer3, + #endif + #if ENABLED(_useTimer4) + _timer4, + #endif + #if ENABLED(_useTimer5) + _timer5, + #endif + _Nbr_16timers +} timer16_Sequence_t; diff --git a/Marlin/endstop_interrupts.h b/Marlin/src/HAL/HAL_AVR/endstop_interrupts.h similarity index 93% rename from Marlin/endstop_interrupts.h rename to Marlin/src/HAL/HAL_AVR/endstop_interrupts.h index 7d37c77c66..10aa652963 100644 --- a/Marlin/endstop_interrupts.h +++ b/Marlin/src/HAL/HAL_AVR/endstop_interrupts.h @@ -38,7 +38,7 @@ #ifndef _ENDSTOP_INTERRUPTS_H_ #define _ENDSTOP_INTERRUPTS_H_ -#include "macros.h" +#include "../../../macros.h" /** * Patch for pins_arduino.h (...\Arduino\hardware\arduino\avr\variants\mega\pins_arduino.h) @@ -72,8 +72,6 @@ 0 ) #endif -volatile uint8_t e_hit = 0; // Different from 0 when the endstops should be tested in detail. - // Must be reset to 0 by the test function when finished. // Install Pin change interrupt for a pin. Can be called multiple times. void pciSetup(byte pin) { @@ -82,14 +80,6 @@ void pciSetup(byte pin) { SBI(PCICR, digitalPinToPCICRbit(pin)); // enable interrupt for the group } -// This is what is really done inside the interrupts. -FORCE_INLINE void endstop_ISR_worker( void ) { - e_hit = 2; // Because the detection of a e-stop hit has a 1 step debouncer it has to be called at least twice. -} - -// Use one Routine to handle each group -// One ISR for all EXT-Interrupts -void endstop_ISR(void) { endstop_ISR_worker(); } // Handlers for pin change interrupts #ifdef PCINT0_vect diff --git a/Marlin/fastio_1280.h b/Marlin/src/HAL/HAL_AVR/fastio_1280.h similarity index 99% rename from Marlin/fastio_1280.h rename to Marlin/src/HAL/HAL_AVR/fastio_1280.h index f9f56c8a92..ed96002f27 100644 --- a/Marlin/fastio_1280.h +++ b/Marlin/src/HAL/HAL_AVR/fastio_1280.h @@ -31,7 +31,7 @@ #ifndef _FASTIO_1280 #define _FASTIO_1280 -#include "fastio.h" +#include "fastio_AVR.h" // change for your board #define DEBUG_LED DIO21 diff --git a/Marlin/fastio_1281.h b/Marlin/src/HAL/HAL_AVR/fastio_1281.h similarity index 99% rename from Marlin/fastio_1281.h rename to Marlin/src/HAL/HAL_AVR/fastio_1281.h index 85d2c4ef7c..0bbea73ed6 100644 --- a/Marlin/fastio_1281.h +++ b/Marlin/src/HAL/HAL_AVR/fastio_1281.h @@ -31,7 +31,7 @@ #ifndef _FASTIO_1281 #define _FASTIO_1281 -#include "fastio.h" +#include "fastio_AVR.h" // change for your board #define DEBUG_LED DIO46 diff --git a/Marlin/fastio_168.h b/Marlin/src/HAL/HAL_AVR/fastio_168.h similarity index 99% rename from Marlin/fastio_168.h rename to Marlin/src/HAL/HAL_AVR/fastio_168.h index 4ee67a32b7..89304defe2 100644 --- a/Marlin/fastio_168.h +++ b/Marlin/src/HAL/HAL_AVR/fastio_168.h @@ -31,7 +31,7 @@ #ifndef _FASTIO_168 #define _FASTIO_168 -#include "fastio.h" +#include "fastio_AVR.h" #define DEBUG_LED AIO5 diff --git a/Marlin/fastio_644.h b/Marlin/src/HAL/HAL_AVR/fastio_644.h similarity index 99% rename from Marlin/fastio_644.h rename to Marlin/src/HAL/HAL_AVR/fastio_644.h index 6465738d03..c0a453397d 100644 --- a/Marlin/fastio_644.h +++ b/Marlin/src/HAL/HAL_AVR/fastio_644.h @@ -31,7 +31,7 @@ #ifndef _FASTIO_644 #define _FASTIO_644 -#include "fastio.h" +#include "fastio_AVR.h" #define DEBUG_LED DIO0 diff --git a/Marlin/fastio_AT90USB.h b/Marlin/src/HAL/HAL_AVR/fastio_AT90USB.h similarity index 99% rename from Marlin/fastio_AT90USB.h rename to Marlin/src/HAL/HAL_AVR/fastio_AT90USB.h index 68463e18a5..803944e4df 100644 --- a/Marlin/fastio_AT90USB.h +++ b/Marlin/src/HAL/HAL_AVR/fastio_AT90USB.h @@ -32,7 +32,7 @@ #ifndef _FASTIO_AT90USB #define _FASTIO_AT90USB -#include "fastio.h" +#include "fastio_AVR.h" // change for your board #define DEBUG_LED DIO31 /* led D5 red */ diff --git a/Marlin/fastio.h b/Marlin/src/HAL/HAL_AVR/fastio_AVR.h similarity index 99% rename from Marlin/fastio.h rename to Marlin/src/HAL/HAL_AVR/fastio_AVR.h index d5ae8f2cce..035e3a5d12 100644 --- a/Marlin/fastio.h +++ b/Marlin/src/HAL/HAL_AVR/fastio_AVR.h @@ -30,7 +30,7 @@ #define _FASTIO_ARDUINO_H #include -#include "macros.h" +#include "../../../macros.h" #define AVR_AT90USB1286_FAMILY (defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1286P__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB646P__) || defined(__AVR_AT90USB647__)) #define AVR_ATmega1284_FAMILY (defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644PA__) || defined(__AVR_ATmega1284P__)) @@ -38,7 +38,6 @@ #define AVR_ATmega2561_FAMILY (defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__)) #define AVR_ATmega328_FAMILY (defined(__AVR_ATmega168__) || defined(__AVR_ATmega328__) || defined(__AVR_ATmega328p__)) - /** * Include Ports and Functions */ @@ -57,7 +56,7 @@ #endif #ifndef _BV - #define _BV(PIN) (1UL << PIN) + #define _BV(bit) (1UL << (bit)) #endif /** @@ -269,7 +268,7 @@ typedef enum { #define PWM_CHK_MOTOR_CURRENT(p) false #endif -#if defined(NUM_SERVOS) +#ifdef NUM_SERVOS #if AVR_ATmega2560_FAMILY #define PWM_CHK_SERVO(p) ( p == 5 || NUM_SERVOS > 12 && p == 6 || NUM_SERVOS > 24 && p == 46) //PWMS 3A, 4A & 5A #elif AVR_ATmega2561_FAMILY diff --git a/Marlin/src/HAL/HAL_AVR/math_AVR.h b/Marlin/src/HAL/HAL_AVR/math_AVR.h new file mode 100644 index 0000000000..9d210eed38 --- /dev/null +++ b/Marlin/src/HAL/HAL_AVR/math_AVR.h @@ -0,0 +1,112 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef MATH_AVR_H +#define MATH_AVR_H + +/** + * Optimized math functions for AVR + */ + +// intRes = longIn1 * longIn2 >> 24 +// uses: +// r26 to store 0 +// r27 to store bits 16-23 of the 48bit result. The top bit is used to round the two byte result. +// note that the lower two bytes and the upper byte of the 48bit result are not calculated. +// this can cause the result to be out by one as the lower bytes may cause carries into the upper ones. +// B0 A0 are bits 24-39 and are the returned value +// C1 B1 A1 is longIn1 +// D2 C2 B2 A2 is longIn2 +// +#define MultiU24X32toH16(intRes, longIn1, longIn2) \ + asm volatile ( \ + "clr r26 \n\t" \ + "mul %A1, %B2 \n\t" \ + "mov r27, r1 \n\t" \ + "mul %B1, %C2 \n\t" \ + "movw %A0, r0 \n\t" \ + "mul %C1, %C2 \n\t" \ + "add %B0, r0 \n\t" \ + "mul %C1, %B2 \n\t" \ + "add %A0, r0 \n\t" \ + "adc %B0, r1 \n\t" \ + "mul %A1, %C2 \n\t" \ + "add r27, r0 \n\t" \ + "adc %A0, r1 \n\t" \ + "adc %B0, r26 \n\t" \ + "mul %B1, %B2 \n\t" \ + "add r27, r0 \n\t" \ + "adc %A0, r1 \n\t" \ + "adc %B0, r26 \n\t" \ + "mul %C1, %A2 \n\t" \ + "add r27, r0 \n\t" \ + "adc %A0, r1 \n\t" \ + "adc %B0, r26 \n\t" \ + "mul %B1, %A2 \n\t" \ + "add r27, r1 \n\t" \ + "adc %A0, r26 \n\t" \ + "adc %B0, r26 \n\t" \ + "lsr r27 \n\t" \ + "adc %A0, r26 \n\t" \ + "adc %B0, r26 \n\t" \ + "mul %D2, %A1 \n\t" \ + "add %A0, r0 \n\t" \ + "adc %B0, r1 \n\t" \ + "mul %D2, %B1 \n\t" \ + "add %B0, r0 \n\t" \ + "clr r1 \n\t" \ + : \ + "=&r" (intRes) \ + : \ + "d" (longIn1), \ + "d" (longIn2) \ + : \ + "r26" , "r27" \ + ) + +// intRes = intIn1 * intIn2 >> 16 +// uses: +// r26 to store 0 +// r27 to store the byte 1 of the 24 bit result +#define MultiU16X8toH16(intRes, charIn1, intIn2) \ + asm volatile ( \ + "clr r26 \n\t" \ + "mul %A1, %B2 \n\t" \ + "movw %A0, r0 \n\t" \ + "mul %A1, %A2 \n\t" \ + "add %A0, r1 \n\t" \ + "adc %B0, r26 \n\t" \ + "lsr r0 \n\t" \ + "adc %A0, r26 \n\t" \ + "adc %B0, r26 \n\t" \ + "clr r1 \n\t" \ + : \ + "=&r" (intRes) \ + : \ + "d" (charIn1), \ + "d" (intIn2) \ + : \ + "r26" \ + ) + + +#endif diff --git a/Marlin/src/HAL/HAL_AVR/persistent_store.cpp b/Marlin/src/HAL/HAL_AVR/persistent_store.cpp new file mode 100644 index 0000000000..84d0b947f8 --- /dev/null +++ b/Marlin/src/HAL/HAL_AVR/persistent_store.cpp @@ -0,0 +1,57 @@ +#include "../persistent_store_api.h" + +#include "../../../types.h" +#include "../../../language.h" +#include "../../../serial.h" +#include "../../../utility.h" + +#ifdef ARDUINO_ARCH_AVR +#if ENABLED(EEPROM_SETTINGS) + +namespace HAL { +namespace PersistentStore { + +bool access_start() { + return true; +} + +bool access_finish(){ + return true; +} + +bool write_data(int &pos, const uint8_t *value, uint16_t size, uint16_t *crc) { + while (size--) { + uint8_t * const p = (uint8_t * const)pos; + uint8_t v = *value; + // EEPROM has only ~100,000 write cycles, + // so only write bytes that have changed! + if (v != eeprom_read_byte(p)) { + eeprom_write_byte(p, v); + if (eeprom_read_byte(p) != v) { + SERIAL_ECHO_START(); + SERIAL_ECHOLNPGM(MSG_ERR_EEPROM_WRITE); + return false; + } + } + crc16(crc, &v, 1); + pos++; + value++; + }; + return true; +} + +void read_data(int &pos, uint8_t* value, uint16_t size, uint16_t *crc) { + do { + uint8_t c = eeprom_read_byte((unsigned char*)pos); + *value = c; + crc16(crc, &c, 1); + pos++; + value++; + } while (--size); +} + +} +} + +#endif // EEPROM_SETTINGS +#endif // ARDUINO_ARCH_AVR diff --git a/Marlin/pinsDebug_Teensyduino.h b/Marlin/src/HAL/HAL_AVR/pinsDebug_Teensyduino.h similarity index 100% rename from Marlin/pinsDebug_Teensyduino.h rename to Marlin/src/HAL/HAL_AVR/pinsDebug_Teensyduino.h diff --git a/Marlin/pinsDebug_plus_70.h b/Marlin/src/HAL/HAL_AVR/pinsDebug_plus_70.h similarity index 100% rename from Marlin/pinsDebug_plus_70.h rename to Marlin/src/HAL/HAL_AVR/pinsDebug_plus_70.h diff --git a/Marlin/servo.cpp b/Marlin/src/HAL/HAL_AVR/servo_AVR.cpp similarity index 62% rename from Marlin/servo.cpp rename to Marlin/src/HAL/HAL_AVR/servo_AVR.cpp index d6b7b700f9..ab0a7ee617 100644 --- a/Marlin/servo.cpp +++ b/Marlin/src/HAL/HAL_AVR/servo_AVR.cpp @@ -20,6 +20,7 @@ * */ + /** * servo.cpp - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2 * Copyright (c) 2009 Michael Margolis. All right reserved. @@ -50,36 +51,21 @@ * detach() - Stop an attached servo from pulsing its i/o pin. * */ -#include "MarlinConfig.h" + +#ifdef ARDUINO_ARCH_AVR + +#include "../../../MarlinConfig.h" #if HAS_SERVOS #include #include -#include "servo.h" +#include "../servo.h" +#include "../servo_private.h" -#define usToTicks(_us) (( clockCyclesPerMicrosecond()* _us) / 8) // converts microseconds to tick (assumes prescale of 8) // 12 Aug 2009 -#define ticksToUs(_ticks) (( (unsigned)_ticks * 8)/ clockCyclesPerMicrosecond() ) // converts from ticks back to microseconds - -#define TRIM_DURATION 2 // compensation ticks to trim adjust for digitalWrite delays // 12 August 2009 - -//#define NBR_TIMERS ((MAX_SERVOS) / (SERVOS_PER_TIMER)) - -static ServoInfo_t servo_info[MAX_SERVOS]; // static array of servo info structures static volatile int8_t Channel[_Nbr_16timers ]; // counter for the servo being pulsed for each timer (or -1 if refresh interval) -uint8_t ServoCount = 0; // the total number of attached servos - - -// convenience macros -#define SERVO_INDEX_TO_TIMER(_servo_nbr) ((timer16_Sequence_t)(_servo_nbr / (SERVOS_PER_TIMER))) // returns the timer controlling this servo -#define SERVO_INDEX_TO_CHANNEL(_servo_nbr) (_servo_nbr % (SERVOS_PER_TIMER)) // returns the index of the servo on this timer -#define SERVO_INDEX(_timer,_channel) ((_timer*(SERVOS_PER_TIMER)) + _channel) // macro to access servo index by timer and channel -#define SERVO(_timer,_channel) (servo_info[SERVO_INDEX(_timer,_channel)]) // macro to access servo class by timer and channel - -#define SERVO_MIN() (MIN_PULSE_WIDTH - this->min * 4) // minimum value in uS for this servo -#define SERVO_MAX() (MAX_PULSE_WIDTH - this->max * 4) // maximum value in uS for this servo /************ static functions common to all instances ***********************/ @@ -138,8 +124,9 @@ static inline void handle_interrupts(timer16_Sequence_t timer, volatile uint16_t #endif // WIRING +/****************** end of static functions ******************************/ -static void initISR(timer16_Sequence_t timer) { +void initISR(timer16_Sequence_t timer) { #if ENABLED(_useTimer1) if (timer == _timer1) { TCCR1A = 0; // normal counting mode @@ -198,7 +185,7 @@ static void initISR(timer16_Sequence_t timer) { #endif } -static void finISR(timer16_Sequence_t timer) { +void finISR(timer16_Sequence_t timer) { // Disable use of the given timer #ifdef WIRING if (timer == _timer1) { @@ -227,96 +214,6 @@ static void finISR(timer16_Sequence_t timer) { #endif } -static bool isTimerActive(timer16_Sequence_t timer) { - // returns true if any servo is active on this timer - for (uint8_t channel = 0; channel < SERVOS_PER_TIMER; channel++) { - if (SERVO(timer, channel).Pin.isActive) - return true; - } - return false; -} +#endif // HAS_SERVOS - -/****************** end of static functions ******************************/ - -Servo::Servo() { - if (ServoCount < MAX_SERVOS) { - this->servoIndex = ServoCount++; // assign a servo index to this instance - servo_info[this->servoIndex].ticks = usToTicks(DEFAULT_PULSE_WIDTH); // store default values - 12 Aug 2009 - } - else - this->servoIndex = INVALID_SERVO; // too many servos -} - -int8_t Servo::attach(int pin) { - return this->attach(pin, MIN_PULSE_WIDTH, MAX_PULSE_WIDTH); -} - -int8_t Servo::attach(int pin, int min, int max) { - - if (this->servoIndex >= MAX_SERVOS) return -1; - - if (pin > 0) servo_info[this->servoIndex].Pin.nbr = pin; - pinMode(servo_info[this->servoIndex].Pin.nbr, OUTPUT); // set servo pin to output - - // todo min/max check: abs(min - MIN_PULSE_WIDTH) /4 < 128 - this->min = (MIN_PULSE_WIDTH - min) / 4; //resolution of min/max is 4 uS - this->max = (MAX_PULSE_WIDTH - max) / 4; - - // initialize the timer if it has not already been initialized - timer16_Sequence_t timer = SERVO_INDEX_TO_TIMER(servoIndex); - if (!isTimerActive(timer)) initISR(timer); - servo_info[this->servoIndex].Pin.isActive = true; // this must be set after the check for isTimerActive - - return this->servoIndex; -} - -void Servo::detach() { - servo_info[this->servoIndex].Pin.isActive = false; - timer16_Sequence_t timer = SERVO_INDEX_TO_TIMER(servoIndex); - if (!isTimerActive(timer)) finISR(timer); -} - -void Servo::write(int value) { - if (value < MIN_PULSE_WIDTH) { // treat values less than 544 as angles in degrees (valid values in microseconds are handled as microseconds) - value = map(constrain(value, 0, 180), 0, 180, SERVO_MIN(), SERVO_MAX()); - } - this->writeMicroseconds(value); -} - -void Servo::writeMicroseconds(int value) { - // calculate and store the values for the given channel - byte channel = this->servoIndex; - if (channel < MAX_SERVOS) { // ensure channel is valid - // ensure pulse width is valid - value = constrain(value, SERVO_MIN(), SERVO_MAX()) - (TRIM_DURATION); - value = usToTicks(value); // convert to ticks after compensating for interrupt overhead - 12 Aug 2009 - - CRITICAL_SECTION_START; - servo_info[channel].ticks = value; - CRITICAL_SECTION_END; - } -} - -// return the value as degrees -int Servo::read() { return map(this->readMicroseconds() + 1, SERVO_MIN(), SERVO_MAX(), 0, 180); } - -int Servo::readMicroseconds() { - return (this->servoIndex == INVALID_SERVO) ? 0 : ticksToUs(servo_info[this->servoIndex].ticks) + TRIM_DURATION; -} - -bool Servo::attached() { return servo_info[this->servoIndex].Pin.isActive; } - -void Servo::move(int value) { - constexpr uint16_t servo_delay[] = SERVO_DELAY; - static_assert(COUNT(servo_delay) == NUM_SERVOS, "SERVO_DELAY must be an array NUM_SERVOS long."); - if (this->attach(0) >= 0) { - this->write(value); - delay(servo_delay[this->servoIndex]); - #if ENABLED(DEACTIVATE_SERVOS_AFTER_MOVE) - this->detach(); - #endif - } -} - -#endif +#endif // ARDUINO_ARCH_AVR diff --git a/Marlin/src/HAL/HAL_AVR/spi_pins.h b/Marlin/src/HAL/HAL_AVR/spi_pins.h new file mode 100644 index 0000000000..444534880c --- /dev/null +++ b/Marlin/src/HAL/HAL_AVR/spi_pins.h @@ -0,0 +1,67 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef SPI_PINS_H_ +#define SPI_PINS_H_ + +/** + * Define SPI Pins: SCK, MISO, MOSI, SS + */ +#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328__) || defined(__AVR_ATmega328P__) + #define AVR_SCK_PIN 13 + #define AVR_MISO_PIN 12 + #define AVR_MOSI_PIN 11 + #define AVR_SS_PIN 10 +#elif defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644PA__) || defined(__AVR_ATmega1284P__) + #define AVR_SCK_PIN 7 + #define AVR_MISO_PIN 6 + #define AVR_MOSI_PIN 5 + #define AVR_SS_PIN 4 +#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) + #define AVR_SCK_PIN 52 + #define AVR_MISO_PIN 50 + #define AVR_MOSI_PIN 51 + #define AVR_SS_PIN 53 +#elif defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) + #define AVR_SCK_PIN 21 + #define AVR_MISO_PIN 23 + #define AVR_MOSI_PIN 22 + #define AVR_SS_PIN 20 +#elif defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__) + #define AVR_SCK_PIN 10 + #define AVR_MISO_PIN 12 + #define AVR_MOSI_PIN 11 + #define AVR_SS_PIN 16 +#endif + +#ifndef SCK_PIN + #define SCK_PIN AVR_SCK_PIN +#endif +#ifndef MISO_PIN + #define MISO_PIN AVR_MISO_PIN +#endif +#ifndef MOSI_PIN + #define MOSI_PIN AVR_MOSI_PIN +#endif +#ifndef SS_PIN + #define SS_PIN AVR_SS_PIN +#endif + + +#endif /* SPI_PINS_H_ */ diff --git a/Marlin/watchdog.cpp b/Marlin/src/HAL/HAL_AVR/watchdog_AVR.cpp similarity index 95% rename from Marlin/watchdog.cpp rename to Marlin/src/HAL/HAL_AVR/watchdog_AVR.cpp index 5e42b5faca..40d7bdf724 100644 --- a/Marlin/watchdog.cpp +++ b/Marlin/src/HAL/HAL_AVR/watchdog_AVR.cpp @@ -20,11 +20,13 @@ * */ -#include "Marlin.h" +#ifdef ARDUINO_ARCH_AVR + +#include "../../../Marlin.h" #if ENABLED(USE_WATCHDOG) -#include "watchdog.h" +#include "watchdog_AVR.h" // Initialize watchdog with a 4 sec interrupt time void watchdog_init() { @@ -54,3 +56,4 @@ void watchdog_init() { #endif // WATCHDOG_RESET_MANUAL #endif // USE_WATCHDOG +#endif // ARDUINO_ARCH_AVR diff --git a/Marlin/watchdog.h b/Marlin/src/HAL/HAL_AVR/watchdog_AVR.h similarity index 93% rename from Marlin/watchdog.h rename to Marlin/src/HAL/HAL_AVR/watchdog_AVR.h index 2c04b58972..e3572fe749 100644 --- a/Marlin/watchdog.h +++ b/Marlin/src/HAL/HAL_AVR/watchdog_AVR.h @@ -20,10 +20,11 @@ * */ -#ifndef WATCHDOG_H -#define WATCHDOG_H +#ifndef WATCHDOG_AVR_H +#define WATCHDOG_AVR_H + +//#include "../../../Marlin.h" -#include "Marlin.h" #include // Initialize watchdog with a 4 second interrupt time diff --git a/Marlin/src/HAL/HAL_endstop_interrupts.h b/Marlin/src/HAL/HAL_endstop_interrupts.h new file mode 100644 index 0000000000..ab0652ea76 --- /dev/null +++ b/Marlin/src/HAL/HAL_endstop_interrupts.h @@ -0,0 +1,53 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + + +#ifndef HAL_ENDSTOP_INTERRUPTS_H_ +#define HAL_ENDSTOP_INTERRUPTS_H_ + +volatile uint8_t e_hit = 0; // Different from 0 when the endstops should be tested in detail. + // Must be reset to 0 by the test function when finished. + +// This is what is really done inside the interrupts. +FORCE_INLINE void endstop_ISR_worker( void ) { + e_hit = 2; // Because the detection of a e-stop hit has a 1 step debouncer it has to be called at least twice. +} + +// One ISR for all EXT-Interrupts +void endstop_ISR(void) { endstop_ISR_worker(); } + +#ifdef ARDUINO_ARCH_AVR + + #include "HAL_AVR/endstop_interrupts.h" + +#elif defined(ARDUINO_ARCH_SAM) + + #include "HAL_DUE/endstop_interrupts.h" + +#elif IS_32BIT_TEENSY + + #include "HAL_TEENSY35_36/endstop_interrupts.h" + +#else + + #error Unsupported Platform! + +#endif + +#endif /* HAL_ENDSTOP_INTERRUPTS_H_ */ diff --git a/Marlin/src/HAL/HAL_pinsDebug.h b/Marlin/src/HAL/HAL_pinsDebug.h new file mode 100644 index 0000000000..48c95438e9 --- /dev/null +++ b/Marlin/src/HAL/HAL_pinsDebug.h @@ -0,0 +1,35 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef HAL_PINSDEBUG_H + +#ifdef ARDUINO_ARCH_AVR + #include "HAL_AVR/HAL_pinsDebug_AVR.h" +#elif defined(ARDUINO_ARCH_SAM) + #include "HAL_DUE/HAL_pinsDebug_Due.h" +#elif IS_32BIT_TEENSY + #include "HAL_TEENSY35_36/HAL_pinsDebug_Teensy.h" +#else + #error Unsupported Platform! +#endif + +#endif diff --git a/Marlin/src/HAL/HAL_spi_pins.h b/Marlin/src/HAL/HAL_spi_pins.h new file mode 100644 index 0000000000..aac2540291 --- /dev/null +++ b/Marlin/src/HAL/HAL_spi_pins.h @@ -0,0 +1,39 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + + +#ifndef HAL_SPI_PINS_H_ +#define HAL_SPI_PINS_H_ + +#include "MarlinConfig.h" + +#ifdef ARDUINO_ARCH_SAM + #include "HAL_DUE/spi_pins.h" + +#elif defined(IS_32BIT_TEENSY) + #include "HAL_TEENSY35_36/spi_pins.h" + +#elif defined(ARDUINO_ARCH_AVR) + #include "HAL_AVR/spi_pins.h" + +#else + #error "Unsupported Platform!" +#endif + +#endif /* HAL_SPI_PINS_H_ */ diff --git a/Marlin/src/HAL/I2cEeprom.cpp b/Marlin/src/HAL/I2cEeprom.cpp new file mode 100644 index 0000000000..8bdd00967f --- /dev/null +++ b/Marlin/src/HAL/I2cEeprom.cpp @@ -0,0 +1,162 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + + +/** + * Description: functions for I2C connected external EEPROM. + * Not platform dependent. + */ + +#include "../../MarlinConfig.h" + +#if ENABLED(I2C_EEPROM) + +// -------------------------------------------------------------------------- +// Includes +// -------------------------------------------------------------------------- + +#include "HAL.h" +#include + +// -------------------------------------------------------------------------- +// Externals +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Local defines +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Types +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Variables +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Public Variables +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Private Variables +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Function prototypes +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Private functions +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Public functions +// -------------------------------------------------------------------------- + +static bool eeprom_initialised = false; +static uint8_t eeprom_device_address = 0x50; + +static void eeprom_init(void) { + if (!eeprom_initialised) { + Wire.begin(); + eeprom_initialised = true; + } +} + +void eeprom_write_byte(unsigned char *pos, unsigned char value) { + unsigned eeprom_address = (unsigned) pos; + + eeprom_init(); + + Wire.beginTransmission(eeprom_device_address); + Wire.write((int)(eeprom_address >> 8)); // MSB + Wire.write((int)(eeprom_address & 0xFF)); // LSB + Wire.write(value); + Wire.endTransmission(); + + // wait for write cycle to complete + // this could be done more efficiently with "acknowledge polling" + delay(5); +} + +// WARNING: address is a page address, 6-bit end will wrap around +// also, data can be maximum of about 30 bytes, because the Wire library has a buffer of 32 bytes +void eeprom_update_block(const void* pos, void* eeprom_address, size_t n) { + uint8_t eeprom_temp[32] = {0}; + uint8_t flag = 0; + + eeprom_init(); + + Wire.beginTransmission(eeprom_device_address); + Wire.write((int)((unsigned)eeprom_address >> 8)); // MSB + Wire.write((int)((unsigned)eeprom_address & 0xFF)); // LSB + Wire.endTransmission(); + Wire.requestFrom(eeprom_device_address, (byte)n); + for (byte c = 0; c < n; c++) { + if (Wire.available()) eeprom_temp[c] = Wire.read(); + flag |= (eeprom_temp[c] ^ *((uint8_t*)pos + c)); + } + + if (flag) { + Wire.beginTransmission(eeprom_device_address); + Wire.write((int)((unsigned)eeprom_address >> 8)); // MSB + Wire.write((int)((unsigned)eeprom_address & 0xFF)); // LSB + Wire.write((uint8_t*)(pos), n); + Wire.endTransmission(); + + // wait for write cycle to complete + // this could be done more efficiently with "acknowledge polling" + delay(5); + } +} + + +unsigned char eeprom_read_byte(unsigned char *pos) { + byte data = 0xFF; + unsigned eeprom_address = (unsigned) pos; + + eeprom_init (); + + Wire.beginTransmission(eeprom_device_address); + Wire.write((int)(eeprom_address >> 8)); // MSB + Wire.write((int)(eeprom_address & 0xFF)); // LSB + Wire.endTransmission(); + Wire.requestFrom(eeprom_device_address, (byte)1); + if (Wire.available()) + data = Wire.read(); + return data; +} + +// maybe let's not read more than 30 or 32 bytes at a time! +void eeprom_read_block(void* pos, const void* eeprom_address, size_t n) { + eeprom_init(); + + Wire.beginTransmission(eeprom_device_address); + Wire.write((int)((unsigned)eeprom_address >> 8)); // MSB + Wire.write((int)((unsigned)eeprom_address & 0xFF)); // LSB + Wire.endTransmission(); + Wire.requestFrom(eeprom_device_address, (byte)n); + for (byte c = 0; c < n; c++ ) + if (Wire.available()) *((uint8_t*)pos + c) = Wire.read(); +} + + +#endif // ENABLED(I2C_EEPROM) + diff --git a/Marlin/src/HAL/SpiEeprom.cpp b/Marlin/src/HAL/SpiEeprom.cpp new file mode 100644 index 0000000000..365d91d191 --- /dev/null +++ b/Marlin/src/HAL/SpiEeprom.cpp @@ -0,0 +1,117 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Description: functions for SPI connected external EEPROM. + * Not platform dependent. + */ + +#include "../../MarlinConfig.h" + +#if ENABLED(SPI_EEPROM) + +#include "HAL.h" + +#define CMD_WREN 6 // WREN +#define CMD_READ 2 // WRITE +#define CMD_WRITE 2 // WRITE + +uint8_t eeprom_read_byte(uint8_t* pos) { + uint8_t v; + uint8_t eeprom_temp[3]; + + // set read location + // begin transmission from device + eeprom_temp[0] = CMD_READ; + eeprom_temp[1] = ((unsigned)pos>>8) & 0xFF; // addr High + eeprom_temp[2] = (unsigned)pos& 0xFF; // addr Low + digitalWrite(SPI_EEPROM1_CS, HIGH); + digitalWrite(SPI_EEPROM1_CS, LOW); + spiSend(SPI_CHAN_EEPROM1, eeprom_temp, 3); + + v = spiRec(SPI_CHAN_EEPROM1); + digitalWrite(SPI_EEPROM1_CS, HIGH); + return v; +} + + +void eeprom_read_block(void* dest, const void* eeprom_address, size_t n) { + uint8_t eeprom_temp[3]; + + // set read location + // begin transmission from device + eeprom_temp[0] = CMD_READ; + eeprom_temp[1] = ((unsigned)eeprom_address>>8) & 0xFF; // addr High + eeprom_temp[2] = (unsigned)eeprom_address& 0xFF; // addr Low + digitalWrite(SPI_EEPROM1_CS, HIGH); + digitalWrite(SPI_EEPROM1_CS, LOW); + spiSend(SPI_CHAN_EEPROM1, eeprom_temp, 3); + + uint8_t *p_dest = (uint8_t *)dest; + while (n--) + *p_dest++ = spiRec(SPI_CHAN_EEPROM1); + digitalWrite(SPI_EEPROM1_CS, HIGH); +} + +void eeprom_write_byte(uint8_t* pos, uint8_t value) { + uint8_t eeprom_temp[3]; + + /*write enable*/ + eeprom_temp[0] = CMD_WREN; + digitalWrite(SPI_EEPROM1_CS, LOW); + spiSend(SPI_CHAN_EEPROM1, eeprom_temp, 1); + digitalWrite(SPI_EEPROM1_CS, HIGH); + delay(1); + + /*write addr*/ + eeprom_temp[0] = CMD_WRITE; + eeprom_temp[1] = ((unsigned)pos>>8) & 0xFF; //addr High + eeprom_temp[2] = (unsigned)pos & 0xFF; //addr Low + digitalWrite(SPI_EEPROM1_CS, LOW); + spiSend(SPI_CHAN_EEPROM1, eeprom_temp, 3); + + spiSend(SPI_CHAN_EEPROM1, value); + digitalWrite(SPI_EEPROM1_CS, HIGH); + delay(7); // wait for page write to complete +} + +void eeprom_update_block(const void* src, void* eeprom_address, size_t n) { + uint8_t eeprom_temp[3]; + + /*write enable*/ + eeprom_temp[0] = CMD_WREN; + digitalWrite(SPI_EEPROM1_CS, LOW); + spiSend(SPI_CHAN_EEPROM1, eeprom_temp, 1); + digitalWrite(SPI_EEPROM1_CS, HIGH); + delay(1); + + /*write addr*/ + eeprom_temp[0] = CMD_WRITE; + eeprom_temp[1] = ((unsigned)eeprom_address>>8) & 0xFF; //addr High + eeprom_temp[2] = (unsigned)eeprom_address & 0xFF; //addr Low + digitalWrite(SPI_EEPROM1_CS, LOW); + spiSend(SPI_CHAN_EEPROM1, eeprom_temp, 3); + + spiSend(SPI_CHAN_EEPROM1, (const uint8_t*)src, n); + digitalWrite(SPI_EEPROM1_CS, HIGH); + delay(7); // wait for page write to complete +} + + +#endif // ENABLED(SPI_EEPROM) diff --git a/Marlin/src/HAL/math_32bit.h b/Marlin/src/HAL/math_32bit.h new file mode 100644 index 0000000000..8586c00006 --- /dev/null +++ b/Marlin/src/HAL/math_32bit.h @@ -0,0 +1,33 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef MATH_32BIT_H +#define MATH_32BIT_H + +/** + * Math helper functions for 32 bit CPUs + */ + +#define MultiU32X32toH32(intRes, longIn1, longIn2) intRes = ((uint64_t)longIn1 * longIn2 + 0x80000000) >> 32 +#define MultiU32X24toH32(intRes, longIn1, longIn2) intRes = ((uint64_t)longIn1 * longIn2 + 0x00800000) >> 24 + +#endif diff --git a/Marlin/src/HAL/persistent_store_api.h b/Marlin/src/HAL/persistent_store_api.h new file mode 100644 index 0000000000..7d548704d8 --- /dev/null +++ b/Marlin/src/HAL/persistent_store_api.h @@ -0,0 +1,19 @@ +#ifndef _PERSISTENT_STORE_H_ +#define _PERSISTENT_STORE_H_ + +#include +#include + +namespace HAL { +namespace PersistentStore { + +bool access_start(); +bool access_finish(); +bool write_data(int &pos, const uint8_t *value, uint16_t size, uint16_t *crc); +void read_data(int &pos, uint8_t* value, uint16_t size, uint16_t *crc) ; + +} +} + + +#endif /* _PERSISTANT_STORE_H_ */ diff --git a/Marlin/src/HAL/servo.cpp b/Marlin/src/HAL/servo.cpp new file mode 100644 index 0000000000..0e8af80843 --- /dev/null +++ b/Marlin/src/HAL/servo.cpp @@ -0,0 +1,168 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + + +/** + * servo.cpp - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2 + * Copyright (c) 2009 Michael Margolis. All right reserved. + */ + +/** + * A servo is activated by creating an instance of the Servo class passing the desired pin to the attach() method. + * The servos are pulsed in the background using the value most recently written using the write() method + * + * Note that analogWrite of PWM on pins associated with the timer are disabled when the first servo is attached. + * Timers are seized as needed in groups of 12 servos - 24 servos use two timers, 48 servos will use four. + * + * The methods are: + * + * Servo - Class for manipulating servo motors connected to Arduino pins. + * + * attach(pin) - Attach a servo motor to an i/o pin. + * attach(pin, min, max) - Attach to a pin, setting min and max values in microseconds + * Default min is 544, max is 2400 + * + * write() - Set the servo angle in degrees. (Invalid angles —over MIN_PULSE_WIDTH— are treated as µs.) + * writeMicroseconds() - Set the servo pulse width in microseconds. + * move(pin, angle) - Sequence of attach(pin), write(angle), delay(SERVO_DELAY). + * With DEACTIVATE_SERVOS_AFTER_MOVE it detaches after SERVO_DELAY. + * read() - Get the last-written servo pulse width as an angle between 0 and 180. + * readMicroseconds() - Get the last-written servo pulse width in microseconds. + * attached() - Return true if a servo is attached. + * detach() - Stop an attached servo from pulsing its i/o pin. + * + */ + + +#include "../../MarlinConfig.h" + +#include "HAL.h" + +#if HAS_SERVOS && !IS_32BIT_TEENSY + +//#include + +#include "servo.h" +#include "servo_private.h" + +ServoInfo_t servo_info[MAX_SERVOS]; // static array of servo info structures +uint8_t ServoCount = 0; // the total number of attached servos + + +#define SERVO_MIN() (MIN_PULSE_WIDTH - this->min * 4) // minimum value in uS for this servo +#define SERVO_MAX() (MAX_PULSE_WIDTH - this->max * 4) // maximum value in uS for this servo + +/************ static functions common to all instances ***********************/ + +static boolean isTimerActive(timer16_Sequence_t timer) { + // returns true if any servo is active on this timer + for (uint8_t channel = 0; channel < SERVOS_PER_TIMER; channel++) { + if (SERVO(timer, channel).Pin.isActive) + return true; + } + return false; +} + +/****************** end of static functions ******************************/ + +Servo::Servo() { + if (ServoCount < MAX_SERVOS) { + this->servoIndex = ServoCount++; // assign a servo index to this instance + servo_info[this->servoIndex].ticks = usToTicks(DEFAULT_PULSE_WIDTH); // store default values - 12 Aug 2009 + } + else + this->servoIndex = INVALID_SERVO; // too many servos +} + +int8_t Servo::attach(int pin) { + return this->attach(pin, MIN_PULSE_WIDTH, MAX_PULSE_WIDTH); +} + +int8_t Servo::attach(int pin, int min, int max) { + + if (this->servoIndex >= MAX_SERVOS) return -1; + + if (pin > 0) servo_info[this->servoIndex].Pin.nbr = pin; + pinMode(servo_info[this->servoIndex].Pin.nbr, OUTPUT); // set servo pin to output + + // todo min/max check: abs(min - MIN_PULSE_WIDTH) /4 < 128 + this->min = (MIN_PULSE_WIDTH - min) / 4; //resolution of min/max is 4 uS + this->max = (MAX_PULSE_WIDTH - max) / 4; + + // initialize the timer if it has not already been initialized + timer16_Sequence_t timer = SERVO_INDEX_TO_TIMER(servoIndex); + if (!isTimerActive(timer)) initISR(timer); + servo_info[this->servoIndex].Pin.isActive = true; // this must be set after the check for isTimerActive + + return this->servoIndex; +} + +void Servo::detach() { + servo_info[this->servoIndex].Pin.isActive = false; + timer16_Sequence_t timer = SERVO_INDEX_TO_TIMER(servoIndex); + if (!isTimerActive(timer)) finISR(timer); +} + +void Servo::write(int value) { + if (value < MIN_PULSE_WIDTH) { // treat values less than 544 as angles in degrees (valid values in microseconds are handled as microseconds) + value = map(constrain(value, 0, 180), 0, 180, SERVO_MIN(), SERVO_MAX()); + } + this->writeMicroseconds(value); +} + +void Servo::writeMicroseconds(int value) { + // calculate and store the values for the given channel + byte channel = this->servoIndex; + if (channel < MAX_SERVOS) { // ensure channel is valid + // ensure pulse width is valid + value = constrain(value, SERVO_MIN(), SERVO_MAX()) - (TRIM_DURATION); + value = usToTicks(value); // convert to ticks after compensating for interrupt overhead - 12 Aug 2009 + + CRITICAL_SECTION_START; + servo_info[channel].ticks = value; + CRITICAL_SECTION_END; + } +} + +// return the value as degrees +int Servo::read() { return map(this->readMicroseconds() + 1, SERVO_MIN(), SERVO_MAX(), 0, 180); } + +int Servo::readMicroseconds() { + return (this->servoIndex == INVALID_SERVO) ? 0 : ticksToUs(servo_info[this->servoIndex].ticks) + TRIM_DURATION; +} + +bool Servo::attached() { return servo_info[this->servoIndex].Pin.isActive; } + +void Servo::move(int value) { + constexpr uint16_t servo_delay[] = SERVO_DELAY; + static_assert(COUNT(servo_delay) == NUM_SERVOS, "SERVO_DELAY must be an array NUM_SERVOS long."); + if (this->attach(0) >= 0) { + this->write(value); + delay(servo_delay[this->servoIndex]); + #if ENABLED(DEACTIVATE_SERVOS_AFTER_MOVE) + this->detach(); + #endif + } +} + +#endif // HAS_SERVOS + diff --git a/Marlin/servo.h b/Marlin/src/HAL/servo.h similarity index 70% rename from Marlin/servo.h rename to Marlin/src/HAL/servo.h index ad75b6baab..8d099f311f 100644 --- a/Marlin/servo.h +++ b/Marlin/src/HAL/servo.h @@ -69,74 +69,20 @@ #ifndef servo_h #define servo_h +#if IS_32BIT_TEENSY + #include "HAL_TEENSY35_36/HAL_Servo_Teensy.h" // Teensy HAL uses an inherited library +#else + #include -/** - * Defines for 16 bit timers used with Servo library - * - * If _useTimerX is defined then TimerX is a 16 bit timer on the current board - * timer16_Sequence_t enumerates the sequence that the timers should be allocated - * _Nbr_16timers indicates how many 16 bit timers are available. - * - */ - -// Say which 16 bit timers can be used and in what order -#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) - //#define _useTimer1 // Timer 1 is used by the stepper ISR - #define _useTimer3 - #define _useTimer4 - #if !HAS_MOTOR_CURRENT_PWM - #define _useTimer5 // Timer 5 is used for motor current PWM and can't be used for servos. - #endif -#elif defined(__AVR_ATmega32U4__) - #define _useTimer3 -#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__) - #define _useTimer3 -#elif defined(__AVR_ATmega128__) || defined(__AVR_ATmega1281__) || defined(__AVR_ATmega1284P__) || defined(__AVR_ATmega2561__) - #define _useTimer3 +#if defined(ARDUINO_ARCH_AVR) || defined(ARDUINO_ARCH_SAM) + // we're good to go #else - // everything else + #error "This library only supports boards with an AVR or SAM3X processor." #endif -typedef enum { - #if ENABLED(_useTimer1) - _timer1, - #endif - #if ENABLED(_useTimer3) - _timer3, - #endif - #if ENABLED(_useTimer4) - _timer4, - #endif - #if ENABLED(_useTimer5) - _timer5, - #endif - _Nbr_16timers -} timer16_Sequence_t; - - #define Servo_VERSION 2 // software version of this library -#define MIN_PULSE_WIDTH 544 // the shortest pulse sent to a servo -#define MAX_PULSE_WIDTH 2400 // the longest pulse sent to a servo -#define DEFAULT_PULSE_WIDTH 1500 // default pulse width when servo is attached -#define REFRESH_INTERVAL 20000 // minimum time to refresh servos in microseconds - -#define SERVOS_PER_TIMER 12 // the maximum number of servos controlled by one timer -#define MAX_SERVOS (_Nbr_16timers * SERVOS_PER_TIMER) - -#define INVALID_SERVO 255 // flag indicating an invalid servo index - -typedef struct { - uint8_t nbr : 6 ; // a pin number from 0 to 63 - uint8_t isActive : 1 ; // true if this channel is enabled, pin not pulsed if false -} ServoPin_t; - -typedef struct { - ServoPin_t Pin; - unsigned int ticks; -} ServoInfo_t; - class Servo { public: Servo(); @@ -158,4 +104,6 @@ class Servo { int8_t max; // maximum is this value times 4 added to MAX_PULSE_WIDTH }; +#endif // !TEENSY + #endif diff --git a/Marlin/src/HAL/servo_private.h b/Marlin/src/HAL/servo_private.h new file mode 100644 index 0000000000..3d8c50c0df --- /dev/null +++ b/Marlin/src/HAL/servo_private.h @@ -0,0 +1,103 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + servo.h - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2 + Copyright (c) 2009 Michael Margolis. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef servo_private_h +#define servo_private_h + +#include + +// Architecture specific include +#ifdef ARDUINO_ARCH_AVR + #include "HAL_AVR/ServoTimers.h" +#elif defined(ARDUINO_ARCH_SAM) + #include "HAL_DUE/ServoTimers.h" +#else + #error "This library only supports boards with an AVR or SAM3X processor." +#endif + +// Macros + +#define MIN_PULSE_WIDTH 544 // the shortest pulse sent to a servo +#define MAX_PULSE_WIDTH 2400 // the longest pulse sent to a servo +#define DEFAULT_PULSE_WIDTH 1500 // default pulse width when servo is attached +#define REFRESH_INTERVAL 20000 // minimum time to refresh servos in microseconds + +#define SERVOS_PER_TIMER 12 // the maximum number of servos controlled by one timer +#define MAX_SERVOS (_Nbr_16timers * SERVOS_PER_TIMER) + +#define INVALID_SERVO 255 // flag indicating an invalid servo index + +// +#define usToTicks(_us) (( clockCyclesPerMicrosecond()* _us) / PRESCALER) // converts microseconds to tick (PRESCALER depends on architecture) +#define ticksToUs(_ticks) (( (unsigned)_ticks * PRESCALER)/ clockCyclesPerMicrosecond() ) // converts from ticks back to microseconds + +//#define NBR_TIMERS ((MAX_SERVOS) / (SERVOS_PER_TIMER)) + +// convenience macros +#define SERVO_INDEX_TO_TIMER(_servo_nbr) ((timer16_Sequence_t)(_servo_nbr / (SERVOS_PER_TIMER))) // returns the timer controlling this servo +#define SERVO_INDEX_TO_CHANNEL(_servo_nbr) (_servo_nbr % (SERVOS_PER_TIMER)) // returns the index of the servo on this timer +#define SERVO_INDEX(_timer,_channel) ((_timer*(SERVOS_PER_TIMER)) + _channel) // macro to access servo index by timer and channel +#define SERVO(_timer,_channel) (servo_info[SERVO_INDEX(_timer,_channel)]) // macro to access servo class by timer and channel + +// Types + +typedef struct { + uint8_t nbr : 6 ; // a pin number from 0 to 63 + uint8_t isActive : 1 ; // true if this channel is enabled, pin not pulsed if false +} ServoPin_t; + +typedef struct { + ServoPin_t Pin; + unsigned int ticks; +} ServoInfo_t; + +// Global variables + +extern uint8_t ServoCount; +extern ServoInfo_t servo_info[MAX_SERVOS]; + +// Public functions + +extern void initISR(timer16_Sequence_t timer); +extern void finISR(timer16_Sequence_t timer); + + +#endif diff --git a/Marlin/stepper.cpp b/Marlin/stepper.cpp index 600bc39257..c3d9808ec0 100644 --- a/Marlin/stepper.cpp +++ b/Marlin/stepper.cpp @@ -48,11 +48,16 @@ #include "stepper.h" #include "endstops.h" #include "planner.h" +#if MB(ALLIGATOR) + #include "dac_dac084s085.h" +#endif #include "temperature.h" #include "ultralcd.h" #include "language.h" #include "cardreader.h" -#include "speed_lookuptable.h" +#ifdef ARDUINO_ARCH_AVR + #include "speed_lookuptable.h" +#endif #if HAS_DIGIPOTSS #include @@ -99,11 +104,11 @@ volatile uint32_t Stepper::step_events_completed = 0; // The number of step even #if ENABLED(ADVANCE) || ENABLED(LIN_ADVANCE) - constexpr uint16_t ADV_NEVER = 65535; + constexpr HAL_TIMER_TYPE ADV_NEVER = HAL_TIMER_TYPE_MAX; - uint16_t Stepper::nextMainISR = 0, - Stepper::nextAdvanceISR = ADV_NEVER, - Stepper::eISR_Rate = ADV_NEVER; + HAL_TIMER_TYPE Stepper::nextMainISR = 0, + Stepper::nextAdvanceISR = ADV_NEVER, + Stepper::eISR_Rate = ADV_NEVER; #if ENABLED(LIN_ADVANCE) volatile int Stepper::e_steps[E_STEPPERS]; @@ -144,9 +149,9 @@ volatile signed char Stepper::count_direction[NUM_AXIS] = { 1, 1, 1, 1 }; long Stepper::counter_m[MIXING_STEPPERS]; #endif -unsigned short Stepper::acc_step_rate; // needed for deceleration start point +HAL_TIMER_TYPE Stepper::acc_step_rate; // needed for deceleration start point uint8_t Stepper::step_loops, Stepper::step_loops_nominal; -unsigned short Stepper::OCR1A_nominal; +HAL_TIMER_TYPE Stepper::OCR1A_nominal; volatile long Stepper::endstops_trigsteps[XYZ]; @@ -213,66 +218,7 @@ volatile long Stepper::endstops_trigsteps[XYZ]; #define E_APPLY_STEP(v,Q) E_STEP_WRITE(v) #endif -// intRes = longIn1 * longIn2 >> 24 -// uses: -// r26 to store 0 -// r27 to store bits 16-23 of the 48bit result. The top bit is used to round the two byte result. -// note that the lower two bytes and the upper byte of the 48bit result are not calculated. -// this can cause the result to be out by one as the lower bytes may cause carries into the upper ones. -// B0 A0 are bits 24-39 and are the returned value -// C1 B1 A1 is longIn1 -// D2 C2 B2 A2 is longIn2 -// -#define MultiU24X32toH16(intRes, longIn1, longIn2) \ - asm volatile ( \ - "clr r26 \n\t" \ - "mul %A1, %B2 \n\t" \ - "mov r27, r1 \n\t" \ - "mul %B1, %C2 \n\t" \ - "movw %A0, r0 \n\t" \ - "mul %C1, %C2 \n\t" \ - "add %B0, r0 \n\t" \ - "mul %C1, %B2 \n\t" \ - "add %A0, r0 \n\t" \ - "adc %B0, r1 \n\t" \ - "mul %A1, %C2 \n\t" \ - "add r27, r0 \n\t" \ - "adc %A0, r1 \n\t" \ - "adc %B0, r26 \n\t" \ - "mul %B1, %B2 \n\t" \ - "add r27, r0 \n\t" \ - "adc %A0, r1 \n\t" \ - "adc %B0, r26 \n\t" \ - "mul %C1, %A2 \n\t" \ - "add r27, r0 \n\t" \ - "adc %A0, r1 \n\t" \ - "adc %B0, r26 \n\t" \ - "mul %B1, %A2 \n\t" \ - "add r27, r1 \n\t" \ - "adc %A0, r26 \n\t" \ - "adc %B0, r26 \n\t" \ - "lsr r27 \n\t" \ - "adc %A0, r26 \n\t" \ - "adc %B0, r26 \n\t" \ - "mul %D2, %A1 \n\t" \ - "add %A0, r0 \n\t" \ - "adc %B0, r1 \n\t" \ - "mul %D2, %B1 \n\t" \ - "add %B0, r0 \n\t" \ - "clr r1 \n\t" \ - : \ - "=&r" (intRes) \ - : \ - "d" (longIn1), \ - "d" (longIn2) \ - : \ - "r26" , "r27" \ - ) -// Some useful constants - -#define ENABLE_STEPPER_DRIVER_INTERRUPT() SBI(TIMSK1, OCIE1A) -#define DISABLE_STEPPER_DRIVER_INTERRUPT() CBI(TIMSK1, OCIE1A) /** * __________________________ @@ -345,6 +291,8 @@ void Stepper::set_directions() { * Stepper Driver Interrupt * * Directly pulses the stepper motors at high frequency. + * + * AVR : * Timer 1 runs at a base frequency of 2MHz, with this ISR using OCR1A compare mode. * * OCR1A Frequency @@ -355,7 +303,9 @@ void Stepper::set_directions() { * 2000 1 KHz - sleep rate * 4000 500 Hz - init rate */ -ISR(TIMER1_COMPA_vect) { + +HAL_STEP_TIMER_ISR { + HAL_timer_isr_prologue(STEP_TIMER_NUM); #if ENABLED(ADVANCE) || ENABLED(LIN_ADVANCE) Stepper::advance_isr_scheduler(); #else @@ -363,23 +313,23 @@ ISR(TIMER1_COMPA_vect) { #endif } -#define _ENABLE_ISRs() do { cli(); if (thermalManager.in_temp_isr) CBI(TIMSK0, OCIE0B); else SBI(TIMSK0, OCIE0B); ENABLE_STEPPER_DRIVER_INTERRUPT(); } while(0) - void Stepper::isr() { - uint16_t ocr_val; + HAL_TIMER_TYPE ocr_val; #define ENDSTOP_NOMINAL_OCR_VAL 3000 // check endstops every 1.5ms to guarantee two stepper ISRs within 5ms for BLTouch #define OCR_VAL_TOLERANCE 1000 // First max delay is 2.0ms, last min delay is 0.5ms, all others 1.5ms #if DISABLED(ADVANCE) && DISABLED(LIN_ADVANCE) // Disable Timer0 ISRs and enable global ISR again to capture UART events (incoming chars) - CBI(TIMSK0, OCIE0B); // Temperature ISR + DISABLE_TEMPERATURE_INTERRUPT(); // Temperature ISR DISABLE_STEPPER_DRIVER_INTERRUPT(); - sei(); + #if !defined(CPU_32_BIT) + sei(); + #endif #endif - #define _SPLIT(L) (ocr_val = (uint16_t)L) + #define _SPLIT(L) (ocr_val = (HAL_TIMER_TYPE)L) #if ENABLED(ENDSTOP_INTERRUPTS_FEATURE) #define SPLIT(L) _SPLIT(L) #else // sample endstops in between step pulses @@ -405,10 +355,13 @@ void Stepper::isr() { } _NEXT_ISR(ocr_val); + #ifdef CPU_32_BIT + //todo: HAL? + #else + NOLESS(OCR1A, TCNT1 + 16); + #endif - NOLESS(OCR1A, TCNT1 + 16); - - _ENABLE_ISRs(); // re-enable ISRs + HAL_ENABLE_ISRs(); // re-enable ISRs return; } #endif @@ -420,8 +373,8 @@ void Stepper::isr() { #ifdef SD_FINISHED_RELEASECOMMAND if (!cleaning_buffer_counter && (SD_FINISHED_STEPPERRELEASE)) enqueue_and_echo_commands_P(PSTR(SD_FINISHED_RELEASECOMMAND)); #endif - _NEXT_ISR(200); // Run at max speed - 10 KHz - _ENABLE_ISRs(); // re-enable ISRs + _NEXT_ISR(HAL_STEPPER_TIMER_RATE / 10000); // Run at max speed - 10 KHz + HAL_ENABLE_ISRs(); // re-enable ISRs return; } @@ -450,8 +403,8 @@ void Stepper::isr() { #if ENABLED(Z_LATE_ENABLE) if (current_block->steps[Z_AXIS] > 0) { enable_Z(); - _NEXT_ISR(2000); // Run at slow speed - 1 KHz - _ENABLE_ISRs(); // re-enable ISRs + _NEXT_ISR(HAL_STEPPER_TIMER_RATE / 1000); // Run at slow speed - 1 KHz + HAL_ENABLE_ISRs(); // re-enable ISRs return; } #endif @@ -461,8 +414,8 @@ void Stepper::isr() { // #endif } else { - _NEXT_ISR(2000); // Run at slow speed - 1 KHz - _ENABLE_ISRs(); // re-enable ISRs + _NEXT_ISR(HAL_STEPPER_TIMER_RATE / 1000); // Run at slow speed - 1 KHz + HAL_ENABLE_ISRs(); // re-enable ISRs return; } } @@ -613,7 +566,7 @@ void Stepper::isr() { * 10µs = 160 or 200 cycles. */ #if EXTRA_CYCLES_XYZE > 20 - uint32_t pulse_start = TCNT0; + uint32_t pulse_start = HAL_timer_get_current_count(STEP_TIMER_NUM); #endif #if HAS_X_STEP @@ -645,8 +598,8 @@ void Stepper::isr() { // For minimum pulse time wait before stopping pulses #if EXTRA_CYCLES_XYZE > 20 - while (EXTRA_CYCLES_XYZE > (uint32_t)(TCNT0 - pulse_start) * (INT0_PRESCALER)) { /* nada */ } - pulse_start = TCNT0; + while (EXTRA_CYCLES_XYZE > (uint32_t)(HAL_timer_get_current_count(STEP_TIMER_NUM) - pulse_start) * (STEPPER_TIMER_PRESCALE)) { /* nada */ } + pulse_start = HAL_timer_get_current_count(STEP_TIMER_NUM); #elif EXTRA_CYCLES_XYZE > 0 DELAY_NOPS(EXTRA_CYCLES_XYZE); #endif @@ -686,7 +639,7 @@ void Stepper::isr() { // For minimum pulse time wait after stopping pulses also #if EXTRA_CYCLES_XYZE > 20 - if (i) while (EXTRA_CYCLES_XYZE > (uint32_t)(TCNT0 - pulse_start) * (INT0_PRESCALER)) { /* nada */ } + if (i) while (EXTRA_CYCLES_XYZE > (uint32_t)(HAL_timer_get_current_count(STEP_TIMER_NUM) - pulse_start) * (STEPPER_TIMER_PRESCALE)) { /* nada */ } #elif EXTRA_CYCLES_XYZE > 0 if (i) DELAY_NOPS(EXTRA_CYCLES_XYZE); #endif @@ -716,14 +669,18 @@ void Stepper::isr() { // Calculate new timer value if (step_events_completed <= (uint32_t)current_block->accelerate_until) { - MultiU24X32toH16(acc_step_rate, acceleration_time, current_block->acceleration_rate); + #ifdef CPU_32_BIT + MultiU32X24toH32(acc_step_rate, acceleration_time, current_block->acceleration_rate); + #else + MultiU24X32toH16(acc_step_rate, acceleration_time, current_block->acceleration_rate); + #endif acc_step_rate += current_block->initial_rate; // upper limit NOMORE(acc_step_rate, current_block->nominal_rate); // step_rate to timer interval - const uint16_t timer = calc_timer(acc_step_rate); + const HAL_TIMER_TYPE timer = calc_timer(acc_step_rate); SPLIT(timer); // split step into multiple ISRs if larger than ENDSTOP_NOMINAL_OCR_VAL _NEXT_ISR(ocr_val); @@ -764,12 +721,17 @@ void Stepper::isr() { #endif // ADVANCE or LIN_ADVANCE #if ENABLED(ADVANCE) || ENABLED(LIN_ADVANCE) + // TODO: HAL eISR_Rate = adv_rate(e_steps[TOOL_E_INDEX], timer, step_loops); #endif } else if (step_events_completed > (uint32_t)current_block->decelerate_after) { - uint16_t step_rate; - MultiU24X32toH16(step_rate, deceleration_time, current_block->acceleration_rate); + HAL_TIMER_TYPE step_rate; + #ifdef CPU_32_BIT + MultiU32X24toH32(step_rate, deceleration_time, current_block->acceleration_rate); + #else + MultiU24X32toH16(step_rate, deceleration_time, current_block->acceleration_rate); + #endif if (step_rate < acc_step_rate) { // Still decelerating? step_rate = acc_step_rate - step_rate; @@ -779,7 +741,7 @@ void Stepper::isr() { step_rate = current_block->final_rate; // step_rate to timer interval - const uint16_t timer = calc_timer(step_rate); + const HAL_TIMER_TYPE timer = calc_timer(step_rate); SPLIT(timer); // split step into multiple ISRs if larger than ENDSTOP_NOMINAL_OCR_VAL _NEXT_ISR(ocr_val); @@ -834,13 +796,19 @@ void Stepper::isr() { SPLIT(OCR1A_nominal); // split step into multiple ISRs if larger than ENDSTOP_NOMINAL_OCR_VAL _NEXT_ISR(ocr_val); - // ensure we're running at the correct step rate, even if we just came off an acceleration step_loops = step_loops_nominal; } #if DISABLED(ADVANCE) && DISABLED(LIN_ADVANCE) - NOLESS(OCR1A, TCNT1 + 16); + #ifdef CPU_32_BIT + // Make sure stepper interrupt does not monopolise CPU by adjusting count to give about 8 us room + uint32_t stepper_timer_count = HAL_timer_get_count(STEP_TIMER_NUM); + uint32_t stepper_timer_current_count = HAL_timer_get_current_count(STEP_TIMER_NUM) + 8 * HAL_TICKS_PER_US; + HAL_timer_set_count(STEP_TIMER_NUM, stepper_timer_count < stepper_timer_current_count ? stepper_timer_current_count : stepper_timer_count); + #else + NOLESS(OCR1A, TCNT1 + 16); + #endif #endif // If current block is finished, reset pointer @@ -849,7 +817,7 @@ void Stepper::isr() { planner.discard_current_block(); } #if DISABLED(ADVANCE) && DISABLED(LIN_ADVANCE) - _ENABLE_ISRs(); // re-enable ISRs + HAL_ENABLE_ISRs(); // re-enable ISRs #endif } @@ -951,7 +919,7 @@ void Stepper::isr() { void Stepper::advance_isr_scheduler() { // Disable Timer0 ISRs and enable global ISR again to capture UART events (incoming chars) - CBI(TIMSK0, OCIE0B); // Temperature ISR + DISABLE_TEMPERATURE_INTERRUPT(); // Temperature ISR DISABLE_STEPPER_DRIVER_INTERRUPT(); sei(); @@ -984,7 +952,7 @@ void Stepper::isr() { NOLESS(OCR1A, TCNT1 + 16); // Restore original ISR settings - _ENABLE_ISRs(); + HAL_ENABLE_ISRs(); } #endif // ADVANCE or LIN_ADVANCE @@ -996,6 +964,15 @@ void Stepper::init() { digipot_init(); #endif + #if MB(ALLIGATOR) + const float motor_current[] = MOTOR_CURRENT; + unsigned int digipot_motor = 0; + for (uint8_t i = 0; i < 3 + EXTRUDERS; i++) { + digipot_motor = 255 * (motor_current[i] / 2.5); + dac084s085::setValue(i, digipot_motor); + } + #endif//MB(ALLIGATOR) + // Init Microstepping Pins #if HAS_MICROSTEPS microstep_init(); @@ -1152,6 +1129,7 @@ void Stepper::init() { E_AXIS_INIT(4); #endif +#ifdef ARDUINO_ARCH_AVR // waveform generation = 0100 = CTC SET_WGM(1, CTC_OCRnA); @@ -1168,6 +1146,11 @@ void Stepper::init() { // Init Stepper ISR to 122 Hz for quick starting OCR1A = 0x4000; TCNT1 = 0; +#else + // Init Stepper ISR to 122 Hz for quick starting + HAL_timer_start (STEP_TIMER_NUM, 122); +#endif + ENABLE_STEPPER_DRIVER_INTERRUPT(); #if ENABLED(ADVANCE) || ENABLED(LIN_ADVANCE) @@ -1663,6 +1646,9 @@ void Stepper::report_positions() { case 4: microstep_ms(driver, MICROSTEP4); break; case 8: microstep_ms(driver, MICROSTEP8); break; case 16: microstep_ms(driver, MICROSTEP16); break; + #if MB(ALLIGATOR) + case 32: microstep_ms(driver, MICROSTEP32); break; + #endif } } diff --git a/Marlin/stepper.h b/Marlin/stepper.h index 3ca1926193..b46273b07c 100644 --- a/Marlin/stepper.h +++ b/Marlin/stepper.h @@ -52,31 +52,6 @@ class Stepper; extern Stepper stepper; -// intRes = intIn1 * intIn2 >> 16 -// uses: -// r26 to store 0 -// r27 to store the byte 1 of the 24 bit result -#define MultiU16X8toH16(intRes, charIn1, intIn2) \ - asm volatile ( \ - "clr r26 \n\t" \ - "mul %A1, %B2 \n\t" \ - "movw %A0, r0 \n\t" \ - "mul %A1, %A2 \n\t" \ - "add %A0, r1 \n\t" \ - "adc %B0, r26 \n\t" \ - "lsr r0 \n\t" \ - "adc %A0, r26 \n\t" \ - "adc %B0, r26 \n\t" \ - "clr r1 \n\t" \ - : \ - "=&r" (intRes) \ - : \ - "d" (charIn1), \ - "d" (intIn2) \ - : \ - "r26" \ - ) - class Stepper { public: @@ -112,8 +87,9 @@ class Stepper { static volatile uint32_t step_events_completed; // The number of step events executed in the current block #if ENABLED(ADVANCE) || ENABLED(LIN_ADVANCE) - static uint16_t nextMainISR, nextAdvanceISR, eISR_Rate; + static HAL_TIMER_TYPE nextMainISR, nextAdvanceISR, eISR_Rate; #define _NEXT_ISR(T) nextMainISR = T + #if ENABLED(LIN_ADVANCE) static volatile int e_steps[E_STEPPERS]; static int final_estep_rate; @@ -127,14 +103,14 @@ class Stepper { static long old_advance; #endif #else - #define _NEXT_ISR(T) OCR1A = T + #define _NEXT_ISR(T) HAL_timer_set_count(STEP_TIMER_NUM, T); #endif // ADVANCE or LIN_ADVANCE static long acceleration_time, deceleration_time; //unsigned long accelerate_until, decelerate_after, acceleration_rate, initial_rate, final_rate, nominal_rate; - static unsigned short acc_step_rate; // needed for deceleration start point + static HAL_TIMER_TYPE acc_step_rate; // needed for deceleration start point static uint8_t step_loops, step_loops_nominal; - static unsigned short OCR1A_nominal; + static HAL_TIMER_TYPE OCR1A_nominal; static volatile long endstops_trigsteps[XYZ]; static volatile long endstops_stepsTotal, endstops_stepsDone; @@ -285,43 +261,71 @@ class Stepper { private: - static FORCE_INLINE unsigned short calc_timer(unsigned short step_rate) { - unsigned short timer; + static FORCE_INLINE HAL_TIMER_TYPE calc_timer(HAL_TIMER_TYPE step_rate) { + HAL_TIMER_TYPE timer; NOMORE(step_rate, MAX_STEP_FREQUENCY); - if (step_rate > 20000) { // If steprate > 20kHz >> step 4 times - step_rate >>= 2; - step_loops = 4; - } - else if (step_rate > 10000) { // If steprate > 10kHz >> step 2 times - step_rate >>= 1; - step_loops = 2; - } - else { - step_loops = 1; - } + // TODO: HAL: tidy this up, use condtionals_post.h + #ifdef CPU_32_BIT + #if ENABLED(DISABLE_MULTI_STEPPING) + step_loops = 1; + #else + if (step_rate > STEP_DOUBLER_FREQUENCY * 2) { // If steprate > (STEP_DOUBLER_FREQUENCY * 2) kHz >> step 4 times + step_rate >>= 2; + step_loops = 4; + } + else if (step_rate > STEP_DOUBLER_FREQUENCY) { // If steprate > STEP_DOUBLER_FREQUENCY kHz >> step 2 times + step_rate >>= 1; + step_loops = 2; + } + else { + step_loops = 1; + } + #endif + #else + if (step_rate > 20000) { // If steprate > 20kHz >> step 4 times + step_rate >>= 2; + step_loops = 4; + } + else if (step_rate > 10000) { // If steprate > 10kHz >> step 2 times + step_rate >>= 1; + step_loops = 2; + } + else { + step_loops = 1; + } + #endif + + #ifdef CPU_32_BIT + // In case of high-performance processor, it is able to calculate in real-time + timer = (uint32_t)(HAL_STEPPER_TIMER_RATE) / step_rate; + if (timer < (HAL_STEPPER_TIMER_RATE / (STEP_DOUBLER_FREQUENCY * 2))) { // (STEP_DOUBLER_FREQUENCY * 2 kHz - this should never happen) + timer = (HAL_STEPPER_TIMER_RATE / (STEP_DOUBLER_FREQUENCY * 2)); + } + #else + NOLESS(step_rate, F_CPU / 500000); + step_rate -= F_CPU / 500000; // Correct for minimal speed + if (step_rate >= (8 * 256)) { // higher step rate + unsigned short table_address = (unsigned short)&speed_lookuptable_fast[(unsigned char)(step_rate >> 8)][0]; + unsigned char tmp_step_rate = (step_rate & 0x00ff); + unsigned short gain = (unsigned short)pgm_read_word_near(table_address + 2); + MultiU16X8toH16(timer, tmp_step_rate, gain); + timer = (unsigned short)pgm_read_word_near(table_address) - timer; + } + else { // lower step rates + unsigned short table_address = (unsigned short)&speed_lookuptable_slow[0][0]; + table_address += ((step_rate) >> 1) & 0xfffc; + timer = (unsigned short)pgm_read_word_near(table_address); + timer -= (((unsigned short)pgm_read_word_near(table_address + 2) * (unsigned char)(step_rate & 0x0007)) >> 3); + } + if (timer < 100) { // (20kHz - this should never happen) + timer = 100; + MYSERIAL.print(MSG_STEPPER_TOO_HIGH); + MYSERIAL.println(step_rate); + } + #endif - NOLESS(step_rate, F_CPU / 500000); - step_rate -= F_CPU / 500000; // Correct for minimal speed - if (step_rate >= (8 * 256)) { // higher step rate - unsigned short table_address = (unsigned short)&speed_lookuptable_fast[(unsigned char)(step_rate >> 8)][0]; - unsigned char tmp_step_rate = (step_rate & 0x00FF); - unsigned short gain = (unsigned short)pgm_read_word_near(table_address + 2); - MultiU16X8toH16(timer, tmp_step_rate, gain); - timer = (unsigned short)pgm_read_word_near(table_address) - timer; - } - else { // lower step rates - unsigned short table_address = (unsigned short)&speed_lookuptable_slow[0][0]; - table_address += ((step_rate) >> 1) & 0xFFFC; - timer = (unsigned short)pgm_read_word_near(table_address); - timer -= (((unsigned short)pgm_read_word_near(table_address + 2) * (unsigned char)(step_rate & 0x0007)) >> 3); - } - if (timer < 100) { // (20kHz - this should never happen) - timer = 100; - MYSERIAL.print(MSG_STEPPER_TOO_HIGH); - MYSERIAL.println(step_rate); - } return timer; } diff --git a/Marlin/temperature.cpp b/Marlin/temperature.cpp index 261e12cff5..e2d88775bf 100644 --- a/Marlin/temperature.cpp +++ b/Marlin/temperature.cpp @@ -32,7 +32,7 @@ #include "language.h" #if ENABLED(HEATER_0_USES_MAX6675) - #include "spi.h" + #include "private_spi.h" #endif #if ENABLED(BABYSTEPPING) @@ -43,10 +43,6 @@ #include "endstops.h" #endif -#if ENABLED(USE_WATCHDOG) - #include "watchdog.h" -#endif - #ifdef K1 // Defined in Configuration.h in the PID settings #define K2 (1.0-K1) #endif @@ -1054,38 +1050,39 @@ void Temperature::init() { #endif // HEATER_0_USES_MAX6675 - #ifdef DIDR2 - #define ANALOG_SELECT(pin) do{ if (pin < 8) SBI(DIDR0, pin); else SBI(DIDR2, pin - 8); }while(0) - #else - #define ANALOG_SELECT(pin) do{ SBI(DIDR0, pin); }while(0) - #endif + HAL_adc_init(); - // Set analog inputs - ADCSRA = _BV(ADEN) | _BV(ADSC) | _BV(ADIF) | 0x07; - DIDR0 = 0; - #ifdef DIDR2 - DIDR2 = 0; - #endif #if HAS_TEMP_0 - ANALOG_SELECT(TEMP_0_PIN); + HAL_ANALOG_SELECT(TEMP_0_PIN); #endif #if HAS_TEMP_1 - ANALOG_SELECT(TEMP_1_PIN); + HAL_ANALOG_SELECT(TEMP_1_PIN); #endif #if HAS_TEMP_2 - ANALOG_SELECT(TEMP_2_PIN); + HAL_ANALOG_SELECT(TEMP_2_PIN); #endif #if HAS_TEMP_3 - ANALOG_SELECT(TEMP_3_PIN); + HAL_ANALOG_SELECT(TEMP_3_PIN); #endif #if HAS_TEMP_4 - ANALOG_SELECT(TEMP_4_PIN); + HAL_ANALOG_SELECT(TEMP_4_PIN); #endif #if HAS_TEMP_BED - ANALOG_SELECT(TEMP_BED_PIN); + HAL_ANALOG_SELECT(TEMP_BED_PIN); #endif #if ENABLED(FILAMENT_WIDTH_SENSOR) - ANALOG_SELECT(FILWIDTH_PIN); + HAL_ANALOG_SELECT(FILWIDTH_PIN); + #endif + +// todo: HAL: fix abstraction + #ifdef ARDUINO_ARCH_AVR + // Use timer0 for temperature measurement + // Interleave temperature interrupt with millies interrupt + OCR0B = 128; + SBI(TIMSK0, OCIE0B); + #else + HAL_timer_start (TEMP_TIMER_NUM, TEMP_TIMER_FREQUENCY); + HAL_timer_enable_interrupt (TEMP_TIMER_NUM); #endif #if HAS_AUTO_FAN_0 @@ -1139,11 +1136,6 @@ void Temperature::init() { #endif #endif - // Use timer0 for temperature measurement - // Interleave temperature interrupt with millies interrupt - OCR0B = 128; - SBI(TIMSK0, OCIE0B); - // Wait for temperature measurement to settle delay(250); @@ -1415,12 +1407,12 @@ void Temperature::disable_all_heaters() { uint32_t max6675_temp = 2000; #define MAX6675_ERROR_MASK 7 #define MAX6675_DISCARD_BITS 18 - #define MAX6675_SPEED_BITS (_BV(SPR1)) // clock ÷ 64 + #define MAX6675_SPEED_BITS 3 // (_BV(SPR1)) // clock ÷ 64 #else uint16_t max6675_temp = 2000; #define MAX6675_ERROR_MASK 4 #define MAX6675_DISCARD_BITS 3 - #define MAX6675_SPEED_BITS (_BV(SPR0)) // clock ÷ 16 + #define MAX6675_SPEED_BITS 2 // (_BV(SPR0)) // clock ÷ 16 #endif int Temperature::read_max6675() { @@ -1433,14 +1425,8 @@ void Temperature::disable_all_heaters() { next_max6675_ms = ms + MAX6675_HEAT_INTERVAL; - CBI( - #ifdef PRR - PRR - #elif defined(PRR0) - PRR0 - #endif - , PRSPI); - SPCR = _BV(MSTR) | _BV(SPE) | MAX6675_SPEED_BITS; + spiBegin(); + spiInit(MAX6675_SPEED_BITS); WRITE(MAX6675_SS, 0); // enable TT_MAX6675 @@ -1451,7 +1437,7 @@ void Temperature::disable_all_heaters() { // Read a big-endian temperature value max6675_temp = 0; for (uint8_t i = sizeof(max6675_temp); i--;) { - max6675_temp |= max6675_spi.receive(); + max6675_temp |= spiRec(); if (i > 0) max6675_temp <<= 8; // shift left if not the last byte } @@ -1607,7 +1593,10 @@ void Temperature::set_current_temp_raw() { * - For PINS_DEBUGGING, monitor and report endstop pins * - For ENDSTOP_INTERRUPTS_FEATURE check endstops if flagged */ -ISR(TIMER0_COMPB_vect) { Temperature::isr(); } +HAL_TEMP_TIMER_ISR { + HAL_timer_isr_prologue (TEMP_TIMER_NUM); + Temperature::isr(); +} volatile bool Temperature::in_temp_isr = false; @@ -1618,8 +1607,10 @@ void Temperature::isr() { in_temp_isr = true; // Allow UART and stepper ISRs - CBI(TIMSK0, OCIE0B); //Disable Temperature ISR - sei(); + DISABLE_TEMPERATURE_INTERRUPT(); //Disable Temperature ISR + #if !defined(CPU_32_BIT) + sei(); + #endif static int8_t temp_count = -1; static ADCSensorState adc_sensor_state = StartupDelay; @@ -1914,13 +1905,6 @@ void Temperature::isr() { * This gives each ADC 0.9765ms to charge up. */ - #define SET_ADMUX_ADCSRA(pin) ADMUX = _BV(REFS0) | (pin & 0x07); SBI(ADCSRA, ADSC) - #ifdef MUX5 - #define START_ADC(pin) if (pin > 7) ADCSRB = _BV(MUX5); else ADCSRB = 0; SET_ADMUX_ADCSRA(pin) - #else - #define START_ADC(pin) ADCSRB = 0; SET_ADMUX_ADCSRA(pin) - #endif - switch (adc_sensor_state) { case SensorsReady: { @@ -1940,66 +1924,66 @@ void Temperature::isr() { #if HAS_TEMP_0 case PrepareTemp_0: - START_ADC(TEMP_0_PIN); + HAL_START_ADC(TEMP_0_PIN); break; case MeasureTemp_0: - raw_temp_value[0] += ADC; + raw_temp_value[0] += HAL_READ_ADC; break; #endif #if HAS_TEMP_BED case PrepareTemp_BED: - START_ADC(TEMP_BED_PIN); + HAL_START_ADC(TEMP_BED_PIN); break; case MeasureTemp_BED: - raw_temp_bed_value += ADC; + raw_temp_bed_value += HAL_READ_ADC; break; #endif #if HAS_TEMP_1 case PrepareTemp_1: - START_ADC(TEMP_1_PIN); + HAL_START_ADC(TEMP_1_PIN); break; case MeasureTemp_1: - raw_temp_value[1] += ADC; + raw_temp_value[1] += HAL_READ_ADC; break; #endif #if HAS_TEMP_2 case PrepareTemp_2: - START_ADC(TEMP_2_PIN); + HAL_START_ADC(TEMP_2_PIN); break; case MeasureTemp_2: - raw_temp_value[2] += ADC; + raw_temp_value[2] += HAL_READ_ADC; break; #endif #if HAS_TEMP_3 case PrepareTemp_3: - START_ADC(TEMP_3_PIN); + HAL_START_ADC(TEMP_3_PIN); break; case MeasureTemp_3: - raw_temp_value[3] += ADC; + raw_temp_value[3] += HAL_READ_ADC; break; #endif #if HAS_TEMP_4 case PrepareTemp_4: - START_ADC(TEMP_4_PIN); + HAL_START_ADC(TEMP_4_PIN); break; case MeasureTemp_4: - raw_temp_value[4] += ADC; + raw_temp_value[4] += HAL_READ_ADC; break; #endif #if ENABLED(FILAMENT_WIDTH_SENSOR) case Prepare_FILWIDTH: - START_ADC(FILWIDTH_PIN); + HAL_START_ADC(FILWIDTH_PIN); break; case Measure_FILWIDTH: - if (ADC > 102) { // Make sure ADC is reading > 0.5 volts, otherwise don't read. + if (HAL_READ_ADC > 102) { // Make sure ADC is reading > 0.5 volts, otherwise don't read. raw_filwidth_value -= (raw_filwidth_value >> 7); // Subtract 1/128th of the raw_filwidth_value - raw_filwidth_value += ((unsigned long)ADC << 7); // Add new ADC reading, scaled by 128 + raw_filwidth_value += ((unsigned long)HAL_READ_ADC << 7); // Add new ADC reading, scaled by 128 } break; #endif @@ -2130,7 +2114,9 @@ void Temperature::isr() { } #endif - cli(); + #if !defined(CPU_32_BIT) + cli(); + #endif in_temp_isr = false; - SBI(TIMSK0, OCIE0B); //re-enable Temperature ISR + ENABLE_TEMPERATURE_INTERRUPT(); //re-enable Temperature ISR } diff --git a/Marlin/temperature.h b/Marlin/temperature.h index 6ce644d88e..89a917992f 100644 --- a/Marlin/temperature.h +++ b/Marlin/temperature.h @@ -125,7 +125,7 @@ class Temperature { #endif #if ENABLED(PIDTEMP) || ENABLED(PIDTEMPBED) - #define PID_dT ((OVERSAMPLENR * float(ACTUAL_ADC_SAMPLES)) / (F_CPU / 64.0 / 256.0)) + #define PID_dT ((OVERSAMPLENR * float(ACTUAL_ADC_SAMPLES)) / TEMP_TIMER_FREQUENCY) #endif #if ENABLED(PIDTEMP) diff --git a/Marlin/ubl_G29.cpp b/Marlin/ubl_G29.cpp index 4c10c41cfe..95fa2494bb 100644 --- a/Marlin/ubl_G29.cpp +++ b/Marlin/ubl_G29.cpp @@ -1371,7 +1371,7 @@ z_values[x][y] -= tmp_z_values[x][y]; } - mesh_index_pair unified_bed_leveling::find_closest_mesh_point_of_type(const MeshPointType type, const float &lx, const float &ly, const bool probe_as_reference, unsigned int bits[16], const bool far_flag) { + mesh_index_pair unified_bed_leveling::find_closest_mesh_point_of_type(const MeshPointType type, const float &lx, const float &ly, const bool probe_as_reference, uint16_t bits[16], const bool far_flag) { mesh_index_pair out_mesh; out_mesh.x_index = out_mesh.y_index = -1; diff --git a/Marlin/ubl_motion.cpp b/Marlin/ubl_motion.cpp index be5fe3c200..13684b7012 100644 --- a/Marlin/ubl_motion.cpp +++ b/Marlin/ubl_motion.cpp @@ -27,7 +27,6 @@ #include "ubl.h" #include "planner.h" #include "stepper.h" - #include #include extern float destination[XYZE]; @@ -737,4 +736,3 @@ #endif // UBL_DELTA #endif // AUTO_BED_LEVELING_UBL - diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp index 353db25c5b..57c3e3227d 100644 --- a/Marlin/ultralcd.cpp +++ b/Marlin/ultralcd.cpp @@ -184,6 +184,7 @@ uint16_t max_display_update_time = 0; void menu_action_setting_edit_callback_ ## _name(const char * const pstr, _type * const ptr, const _type minValue, const _type maxValue, const screenFunc_t callback, const bool live=false); \ typedef void _name##_void + DECLARE_MENU_EDIT_TYPE(uint32_t, long5); DECLARE_MENU_EDIT_TYPE(int16_t, int3); DECLARE_MENU_EDIT_TYPE(uint8_t, int8); DECLARE_MENU_EDIT_TYPE(float, float3); @@ -193,7 +194,6 @@ uint16_t max_display_update_time = 0; DECLARE_MENU_EDIT_TYPE(float, float51); DECLARE_MENU_EDIT_TYPE(float, float52); DECLARE_MENU_EDIT_TYPE(float, float62); - DECLARE_MENU_EDIT_TYPE(uint32_t, long5); void menu_action_setting_edit_bool(const char* pstr, bool* ptr); void menu_action_setting_edit_callback_bool(const char* pstr, bool* ptr, screenFunc_t callbackFunc); @@ -4039,6 +4039,7 @@ void kill_screen(const char* lcd_msg) { } \ typedef void _name + DEFINE_MENU_EDIT_TYPE(uint32_t, long5, ftostr5rj, 0.01); DEFINE_MENU_EDIT_TYPE(int16_t, int3, itostr3, 1); DEFINE_MENU_EDIT_TYPE(uint8_t, int8, i8tostr3, 1); DEFINE_MENU_EDIT_TYPE(float, float3, ftostr3, 1.0); @@ -4048,7 +4049,6 @@ void kill_screen(const char* lcd_msg) { DEFINE_MENU_EDIT_TYPE(float, float51, ftostr51sign, 10.0); DEFINE_MENU_EDIT_TYPE(float, float52, ftostr52sign, 100.0); DEFINE_MENU_EDIT_TYPE(float, float62, ftostr62rj, 100.0); - DEFINE_MENU_EDIT_TYPE(uint32_t, long5, ftostr5rj, 0.01); /** * diff --git a/Marlin/ultralcd_impl_DOGM.h b/Marlin/ultralcd_impl_DOGM.h index 3cbced445f..df68ded62d 100644 --- a/Marlin/ultralcd_impl_DOGM.h +++ b/Marlin/ultralcd_impl_DOGM.h @@ -869,6 +869,7 @@ static void lcd_implementation_status_screen() { } \ typedef void _name##_void + DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(uint32_t, long5, ftostr5rj); DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(int16_t, int3, itostr3); DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(uint8_t, int8, i8tostr3); DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float3, ftostr3); @@ -878,7 +879,6 @@ static void lcd_implementation_status_screen() { DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float51, ftostr51sign); DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float52, ftostr52sign); DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float62, ftostr62rj); - DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(uint32_t, long5, ftostr5rj); #define lcd_implementation_drawmenu_setting_edit_bool(sel, row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF)) #define lcd_implementation_drawmenu_setting_edit_callback_bool(sel, row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF)) diff --git a/Marlin/ultralcd_impl_HD44780.h b/Marlin/ultralcd_impl_HD44780.h index e8ecd9cf4f..8bcfee94c7 100644 --- a/Marlin/ultralcd_impl_HD44780.h +++ b/Marlin/ultralcd_impl_HD44780.h @@ -976,6 +976,7 @@ static void lcd_implementation_status_screen() { } \ typedef void _name##_void + DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(uint32_t, long5, ftostr5rj); DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(int16_t, int3, itostr3); DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(uint8_t, int8, i8tostr3); DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float3, ftostr3); @@ -985,7 +986,6 @@ static void lcd_implementation_status_screen() { DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float51, ftostr51sign); DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float52, ftostr52sign); DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float62, ftostr62rj); - DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(uint32_t, long5, ftostr5rj); #define lcd_implementation_drawmenu_setting_edit_bool(sel, row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF)) #define lcd_implementation_drawmenu_setting_edit_callback_bool(sel, row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))