bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

🎨 Remove MKS custom pins, TinyBee cleanup (#24186)

Browse Source
This commit is contained in:
ellensp 2022-05-25 08:31:29 +12:00 committed by Scott Lahteine
parent 0daaef589c
commit 4a6ae1b64d
2 changed files with 37 additions and 62 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

21
Marlin/src/HAL/ESP32/u8g_esp32_spi.cpp
View File

@ -23,24 +23,17 @@
*/ */
#ifdef ARDUINO_ARCH_ESP32 #ifdef ARDUINO_ARCH_ESP32
#include "../../inc/MarlinConfigPre.h" #include "../../inc/MarlinConfig.h"
#if EITHER(MKS_MINI_12864, FYSETC_MINI_12864_2_1) #if EITHER(MKS_MINI_12864, FYSETC_MINI_12864_2_1)
#include <U8glib-HAL.h> #include <U8glib-HAL.h>
#include "Arduino.h"
#include "../shared/HAL_SPI.h" #include "../shared/HAL_SPI.h"
#include "HAL.h" #include "HAL.h"
#include "SPI.h" #include "SPI.h"
static SPISettings spiConfig; static SPISettings spiConfig;
#define MDOGLCD_MOSI 23
#define MDOGLCD_SCK 18
#define MLCD_RESET_PIN 0
#define MLCD_PINS_DC 4
#define MDOGLCD_CS 21
#define MDOGLCD_A0 4
#ifndef LCD_SPI_SPEED #ifndef LCD_SPI_SPEED
#ifdef SD_SPI_SPEED #ifdef SD_SPI_SPEED
@ -61,24 +54,24 @@ uint8_t u8g_eps_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_pt
case U8G_COM_MSG_STOP: break; case U8G_COM_MSG_STOP: break;
case U8G_COM_MSG_INIT: case U8G_COM_MSG_INIT:
OUT_WRITE(MDOGLCD_CS, HIGH); OUT_WRITE(DOGLCD_CS, HIGH);
OUT_WRITE(MDOGLCD_A0, HIGH); OUT_WRITE(DOGLCD_A0, HIGH);
OUT_WRITE(MLCD_RESET_PIN, HIGH); OUT_WRITE(LCD_RESET_PIN, HIGH);
u8g_Delay(5); u8g_Delay(5);
spiBegin(); spiBegin();
spiInit(LCD_SPI_SPEED); spiInit(LCD_SPI_SPEED);
break; break;
case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */ case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
WRITE(MDOGLCD_A0, arg_val ? HIGH : LOW); WRITE(DOGLCD_A0, arg_val ? HIGH : LOW);
break; break;
case U8G_COM_MSG_CHIP_SELECT: /* arg_val == 0 means HIGH level of U8G_PI_CS */ case U8G_COM_MSG_CHIP_SELECT: /* arg_val == 0 means HIGH level of U8G_PI_CS */
WRITE(MDOGLCD_CS, arg_val ? LOW : HIGH); WRITE(DOGLCD_CS, arg_val ? LOW : HIGH);
break; break;
case U8G_COM_MSG_RESET: case U8G_COM_MSG_RESET:
WRITE(MLCD_RESET_PIN, arg_val); WRITE(LCD_RESET_PIN, arg_val);
break; break;
case U8G_COM_MSG_WRITE_BYTE: case U8G_COM_MSG_WRITE_BYTE:

78
Marlin/src/pins/esp32/pins_MKS_TINYBEE.h
View File

@ -116,17 +116,7 @@
// //
// ADC Reference Voltage // ADC Reference Voltage
// //
#define ADC_REFERENCE_VOLTAGE 2.5 // 2.5V reference VDDA #define ADC_REFERENCE_VOLTAGE 2.5 // 2.5V reference VDDA
//
// MicroSD card
//
#define SD_MOSI_PIN 23
#define SD_MISO_PIN 19
#define SD_SCK_PIN 18
#define SDSS 5
#define SD_DETECT_PIN 34 // IO34 default is SD_DET signal (Jump to SDDET)
#define USES_SHARED_SPI // SPI is shared by SD card with TMC SPI drivers
/** /**
* ------ ------ * ------ ------
@ -157,56 +147,48 @@
#define EXP2_09_PIN 18 #define EXP2_09_PIN 18
#define EXP2_10_PIN 19 #define EXP2_10_PIN 19
#if HAS_WIRED_LCD //
// MicroSD card
//
//#define SD_MOSI_PIN EXP2_05_PIN // uses esp32 default 23
//#define SD_MISO_PIN EXP2_10_PIN // uses esp32 default 19
//#define SD_SCK_PIN EXP2_09_PIN // uses esp32 default 18
#define SDSS EXP2_07_PIN
#define SD_DETECT_PIN EXP2_04_PIN // IO34 default is SD_DET signal (Jump to SDDET)
#define USES_SHARED_SPI // SPI is shared by SD card with TMC SPI drivers
#define BEEPER_PIN 149 #if HAS_WIRED_LCD
#define BTN_ENC 13 #define BEEPER_PIN EXP1_10_PIN
#define LCD_PINS_ENABLE 21 #define LCD_PINS_ENABLE EXP1_08_PIN
#define LCD_PINS_RS 4 #define LCD_PINS_RS EXP1_07_PIN
#define BTN_EN1 14 #define BTN_ENC EXP1_09_PIN
#define BTN_EN2 12 #define BTN_EN1 EXP2_08_PIN
#define BTN_EN2 EXP2_06_PIN
#define LCD_BACKLIGHT_PIN -1 #define LCD_BACKLIGHT_PIN -1
// MKS MINI12864 and MKS LCD12864B; If using MKS LCD12864A (Need to remove RPK2 resistor)
#if ENABLED(MKS_MINI_12864) #if ENABLED(MKS_MINI_12864)
// MKS MINI12864 and MKS LCD12864B; If using MKS LCD12864A (Need to remove RPK2 resistor)
//#define LCD_BACKLIGHT_PIN -1 #define DOGLCD_CS EXP1_05_PIN
//#define LCD_RESET_PIN -1 #define DOGLCD_A0 EXP1_04_PIN
#define DOGLCD_A0 15 #define LCD_RESET_PIN -1
#define DOGLCD_CS 16 #elif ENABLED(FYSETC_MINI_12864_2_1)
//#define DOGLCD_SCK 19 // MKS_MINI_12864_V3, BTT_MINI_12864_V1, FYSETC_MINI_12864_2_1
//#define DOGLCD_MOSI 23
// Required for MKS_MINI_12864 with this board
//#define MKS_LCD12864B
#elif ENABLED(MKS_MINI_12864_V3)
#define LCD_PINS_DC EXP1_07_PIN
#define DOGLCD_CS EXP1_08_PIN #define DOGLCD_CS EXP1_08_PIN
#define DOGLCD_A0 LCD_PINS_DC #define DOGLCD_A0 EXP1_07_PIN
#define LCD_BACKLIGHT_PIN -1
#define LCD_RESET_PIN EXP1_06_PIN #define LCD_RESET_PIN EXP1_06_PIN
#define NEOPIXEL_PIN EXP1_05_PIN #define NEOPIXEL_PIN EXP1_05_PIN
#define DOGLCD_MOSI EXP2_05_PIN
#define DOGLCD_SCK EXP2_09_PIN
#if SD_CONNECTION_IS(ONBOARD) #if SD_CONNECTION_IS(ONBOARD)
#define FORCE_SOFT_SPI #define FORCE_SOFT_SPI
#endif #endif
#else
#else // !MKS_MINI_12864 #define LCD_PINS_D4 EXP1_06_PIN
#define LCD_PINS_D4 0
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#define LCD_PINS_D5 16 #define LCD_PINS_D5 EXP1_05_PIN
#define LCD_PINS_D6 15 #define LCD_PINS_D6 EXP1_04_PIN
#define LCD_PINS_D7 17 #define LCD_PINS_D7 EXP1_03_PIN
#endif #endif
#define BOARD_ST7920_DELAY_1 96 #define BOARD_ST7920_DELAY_1 96
#define BOARD_ST7920_DELAY_2 48 #define BOARD_ST7920_DELAY_2 48
#define BOARD_ST7920_DELAY_3 600 #define BOARD_ST7920_DELAY_3 600
#endif
#endif // !MKS_MINI_12864
#endif // HAS_WIRED_LCD #endif // HAS_WIRED_LCD