Extended condition macros (#13419)
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add: - Alias `ANY(...)` for `!DISABLED(...)` - Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...` - Alias `EITHER(A,B)` for `ANY(...)` - Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)` - `NONE(...)` for `DISABLED(...)`
This commit is contained in:
Scott Lahteine
GitHub
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1021,7 +1021,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1114,7 +1114,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1140,7 +1140,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1209,7 +1209,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2068,7 +2068,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 50
|
||||
#define RGB_LED_G_PIN 51
|
||||
#define RGB_LED_B_PIN 52
|
||||
@ -2097,7 +2097,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1035,7 +1035,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1654,7 +1654,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1035,7 +1035,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1128,7 +1128,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1154,7 +1154,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1223,7 +1223,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2057,7 +2057,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2086,7 +2086,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1035,7 +1035,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1654,7 +1654,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1015,7 +1015,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1108,7 +1108,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1134,7 +1134,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1203,7 +1203,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2037,7 +2037,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2066,7 +2066,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1026,7 +1026,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1119,7 +1119,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1145,7 +1145,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1214,7 +1214,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2048,7 +2048,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2077,7 +2077,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1035,7 +1035,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1656,7 +1656,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1015,7 +1015,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1108,7 +1108,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1134,7 +1134,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1203,7 +1203,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2039,7 +2039,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2068,7 +2068,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1035,7 +1035,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1654,7 +1654,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1015,7 +1015,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1108,7 +1108,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1134,7 +1134,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1203,7 +1203,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2039,7 +2039,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2068,7 +2068,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1035,7 +1035,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1654,7 +1654,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1129,7 +1129,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1222,7 +1222,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1248,7 +1248,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 4
|
||||
@ -1341,7 +1341,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2191,7 +2191,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2220,7 +2220,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1035,7 +1035,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1654,7 +1654,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -219,7 +219,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1028,7 +1028,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1121,7 +1121,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1147,7 +1147,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1216,7 +1216,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
#define PROBE_PT_1_X 20
|
||||
#define PROBE_PT_1_Y 160
|
||||
#define PROBE_PT_2_X 20
|
||||
@ -2052,7 +2052,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2081,7 +2081,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1035,7 +1035,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1654,7 +1654,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1025,7 +1025,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1118,7 +1118,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1144,7 +1144,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1213,7 +1213,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2047,7 +2047,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2076,7 +2076,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1035,7 +1035,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1654,7 +1654,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1016,7 +1016,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1109,7 +1109,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1135,7 +1135,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1204,7 +1204,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2038,7 +2038,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2067,7 +2067,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -82,7 +82,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1039,7 +1039,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1658,7 +1658,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1015,7 +1015,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1108,7 +1108,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1134,7 +1134,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1203,7 +1203,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2037,7 +2037,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2066,7 +2066,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1015,7 +1015,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1108,7 +1108,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1134,7 +1134,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1203,7 +1203,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2037,7 +2037,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2066,7 +2066,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 2 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1035,7 +1035,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1654,7 +1654,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1015,7 +1015,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1108,7 +1108,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1134,7 +1134,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1203,7 +1203,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2037,7 +2037,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2066,7 +2066,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 2 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1035,7 +1035,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1654,7 +1654,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1003,7 +1003,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1096,7 +1096,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1122,7 +1122,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1191,7 +1191,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2025,7 +2025,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2054,7 +2054,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1035,7 +1035,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1654,7 +1654,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -226,7 +226,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1016,7 +1016,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1108,7 +1108,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1134,7 +1134,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 5
|
||||
@ -1203,7 +1203,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2037,7 +2037,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2066,7 +2066,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1043,7 +1043,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1662,7 +1662,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1003,7 +1003,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1096,7 +1096,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1122,7 +1122,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1191,7 +1191,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2025,7 +2025,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2054,7 +2054,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1035,7 +1035,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1654,7 +1654,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -219,7 +219,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1014,7 +1014,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1107,7 +1107,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1133,7 +1133,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1202,7 +1202,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2036,7 +2036,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2065,7 +2065,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1035,7 +1035,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1654,7 +1654,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1025,7 +1025,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1118,7 +1118,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1144,7 +1144,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1213,7 +1213,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2047,7 +2047,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2076,7 +2076,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1035,7 +1035,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1654,7 +1654,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1015,7 +1015,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1109,7 +1109,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1135,7 +1135,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1204,7 +1204,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2038,7 +2038,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2067,7 +2067,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1035,7 +1035,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1654,7 +1654,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1017,7 +1017,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1111,7 +1111,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1137,7 +1137,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1206,7 +1206,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2040,7 +2040,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2069,7 +2069,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1035,7 +1035,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1654,7 +1654,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -227,7 +227,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1034,7 +1034,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1127,7 +1127,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1153,7 +1153,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1222,7 +1222,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2056,7 +2056,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2085,7 +2085,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1035,7 +1035,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1654,7 +1654,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1025,7 +1025,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1118,7 +1118,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1144,7 +1144,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1213,7 +1213,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2047,7 +2047,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2076,7 +2076,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1035,7 +1035,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1654,7 +1654,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1019,7 +1019,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1112,7 +1112,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1138,7 +1138,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1207,7 +1207,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2041,7 +2041,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2070,7 +2070,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1035,7 +1035,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1654,7 +1654,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1019,7 +1019,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1112,7 +1112,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1138,7 +1138,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1207,7 +1207,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2041,7 +2041,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2070,7 +2070,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1035,7 +1035,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1654,7 +1654,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1025,7 +1025,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1118,7 +1118,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1144,7 +1144,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1213,7 +1213,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2047,7 +2047,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2076,7 +2076,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1035,7 +1035,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1654,7 +1654,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1025,7 +1025,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1118,7 +1118,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1144,7 +1144,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1213,7 +1213,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2043,7 +2043,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2072,7 +2072,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1035,7 +1035,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1654,7 +1654,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -997,7 +997,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1090,7 +1090,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1116,7 +1116,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1185,7 +1185,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2019,7 +2019,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2048,7 +2048,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1035,7 +1035,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1654,7 +1654,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -997,7 +997,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1090,7 +1090,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1116,7 +1116,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1185,7 +1185,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2019,7 +2019,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2048,7 +2048,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1008,7 +1008,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1101,7 +1101,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1127,7 +1127,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1196,7 +1196,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2029,7 +2029,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2058,7 +2058,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1034,7 +1034,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1653,7 +1653,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1021,7 +1021,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1114,7 +1114,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1140,7 +1140,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1209,7 +1209,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
#define PROBE_PT_1_X 45
|
||||
#define PROBE_PT_1_Y 170
|
||||
#define PROBE_PT_2_X 45
|
||||
@ -2043,7 +2043,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2072,7 +2072,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 2 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1035,7 +1035,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1654,7 +1654,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -259,7 +259,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1110,7 +1110,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1210,7 +1210,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1236,7 +1236,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 6
|
||||
@ -1308,7 +1308,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
#define PROBE_PT_1_X 50
|
||||
#define PROBE_PT_1_Y 350
|
||||
#define PROBE_PT_2_X 50
|
||||
@ -2142,7 +2142,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2171,7 +2171,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 2 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1037,7 +1037,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1656,7 +1656,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -221,7 +221,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1045,7 +1045,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1138,7 +1138,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1164,7 +1164,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1238,7 +1238,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
#define PROBE_PT_1_X 35
|
||||
#define PROBE_PT_1_Y 365
|
||||
#define PROBE_PT_2_X 35
|
||||
@ -2072,7 +2072,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2101,7 +2101,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1039,7 +1039,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X 4
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1658,7 +1658,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -222,7 +222,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1035,7 +1035,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1133,7 +1133,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1159,7 +1159,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1228,7 +1228,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
#define PROBE_PT_1_X 35
|
||||
#define PROBE_PT_1_Y 365
|
||||
#define PROBE_PT_2_X 35
|
||||
@ -2065,7 +2065,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2094,7 +2094,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1039,7 +1039,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X 4
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1658,7 +1658,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -998,7 +998,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1093,7 +1093,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1119,7 +1119,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 5
|
||||
@ -1188,7 +1188,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2022,7 +2022,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2051,7 +2051,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1035,7 +1035,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1654,7 +1654,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -998,7 +998,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1093,7 +1093,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1119,7 +1119,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1188,7 +1188,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2026,7 +2026,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2055,7 +2055,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1035,7 +1035,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1654,7 +1654,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1030,7 +1030,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1123,7 +1123,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1149,7 +1149,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1218,7 +1218,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2052,7 +2052,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2081,7 +2081,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
@ -2110,7 +2110,7 @@
|
||||
/**
|
||||
* Customize common displays for GT2560
|
||||
*/
|
||||
#if ENABLED(ULTIMAKERCONTROLLER) || ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) || ENABLED(G3D_PANEL) || ENABLED(MKS_MINI_12864)
|
||||
#if ANY(ULTIMAKERCONTROLLER, REPRAP_DISCOUNT_SMART_CONTROLLER, G3D_PANEL, MKS_MINI_12864)
|
||||
#define SDSUPPORT // Force SD Card support on for these displays
|
||||
#elif DISABLED(LIGHTWEIGHT_UI)
|
||||
#define LCD_WIDTH 20 // Default is 22. For this Geeetech use 20.
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1015,7 +1015,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1108,7 +1108,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1134,7 +1134,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1203,7 +1203,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2037,7 +2037,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2066,7 +2066,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1022,7 +1022,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1115,7 +1115,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1141,7 +1141,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1210,7 +1210,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2044,7 +2044,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2073,7 +2073,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1035,7 +1035,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1654,7 +1654,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1031,7 +1031,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1124,7 +1124,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1150,7 +1150,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 4
|
||||
@ -1219,7 +1219,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2053,7 +2053,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2082,7 +2082,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1030,7 +1030,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1123,7 +1123,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1149,7 +1149,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 4
|
||||
@ -1218,7 +1218,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2052,7 +2052,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2081,7 +2081,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1015,7 +1015,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1108,7 +1108,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1134,7 +1134,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1203,7 +1203,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2037,7 +2037,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2066,7 +2066,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1035,7 +1035,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1654,7 +1654,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1015,7 +1015,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1108,7 +1108,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1134,7 +1134,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1203,7 +1203,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2037,7 +2037,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2066,7 +2066,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1035,7 +1035,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1654,7 +1654,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1019,7 +1019,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1112,7 +1112,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1138,7 +1138,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1207,7 +1207,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2041,7 +2041,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2070,7 +2070,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1035,7 +1035,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1654,7 +1654,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -223,7 +223,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1027,7 +1027,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1120,7 +1120,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1146,7 +1146,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 5
|
||||
@ -1215,7 +1215,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2049,7 +2049,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2078,7 +2078,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1035,7 +1035,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1654,7 +1654,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -238,7 +238,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1035,7 +1035,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1128,7 +1128,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1154,7 +1154,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1223,7 +1223,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2057,7 +2057,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2086,7 +2086,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1035,7 +1035,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1654,7 +1654,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -223,7 +223,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1039,7 +1039,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1136,7 +1136,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1162,7 +1162,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1231,7 +1231,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
#define PROBE_PT_1_X 50
|
||||
#define PROBE_PT_1_Y 150
|
||||
#define PROBE_PT_2_X 50
|
||||
@ -2065,7 +2065,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2094,7 +2094,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1035,7 +1035,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1654,7 +1654,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1014,7 +1014,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1107,7 +1107,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1133,7 +1133,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1202,7 +1202,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2036,7 +2036,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2065,7 +2065,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1035,7 +1035,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1654,7 +1654,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1019,7 +1019,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1112,7 +1112,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1138,7 +1138,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1207,7 +1207,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2041,7 +2041,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2070,7 +2070,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1019,7 +1019,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1112,7 +1112,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1138,7 +1138,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1207,7 +1207,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2041,7 +2041,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2070,7 +2070,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1035,7 +1035,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1654,7 +1654,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -219,7 +219,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1016,7 +1016,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1109,7 +1109,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1135,7 +1135,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1204,7 +1204,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2039,7 +2039,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2068,7 +2068,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1035,7 +1035,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1654,7 +1654,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1015,7 +1015,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1108,7 +1108,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1134,7 +1134,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1203,7 +1203,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2037,7 +2037,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2066,7 +2066,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 6 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1036,7 +1036,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1655,7 +1655,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -219,7 +219,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1023,7 +1023,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1116,7 +1116,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1142,7 +1142,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1211,7 +1211,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2045,7 +2045,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2074,7 +2074,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1015,7 +1015,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1108,7 +1108,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1134,7 +1134,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1203,7 +1203,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2037,7 +2037,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2066,7 +2066,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
@ -1035,7 +1035,7 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
@ -1654,7 +1654,7 @@
|
||||
*/
|
||||
//#define SENSORLESS_PROBING // TMC2130 only
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
|
||||
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
|
||||
#define X_STALL_SENSITIVITY 8
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1064,7 +1064,7 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1157,7 +1157,7 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1183,7 +1183,7 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1252,7 +1252,7 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2086,7 +2086,7 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2115,7 +2115,7 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -218,7 +218,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1015,7 +1015,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1108,7 +1108,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1134,7 +1134,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1203,7 +1203,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2037,7 +2037,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2066,7 +2066,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
@ -221,7 +221,7 @@
|
||||
*/
|
||||
//#define MAGNETIC_PARKING_EXTRUDER
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
||||
#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
|
||||
|
||||
#define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
|
||||
#define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
|
||||
@ -1013,7 +1013,7 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
@ -1106,7 +1106,7 @@
|
||||
*/
|
||||
//#define DEBUG_LEVELING_FEATURE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
|
||||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
@ -1132,7 +1132,7 @@
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
@ -1201,7 +1201,7 @@
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
@ -2037,7 +2037,7 @@
|
||||
//#define RGB_LED
|
||||
//#define RGBW_LED
|
||||
|
||||
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
@ -2066,7 +2066,7 @@
|
||||
* - Change to green once print has finished
|
||||
* - Turn off after the print has finished and the user has pushed a button
|
||||
*/
|
||||
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
|
||||
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
|
||||
#define PRINTER_EVENT_LEDS
|
||||
#endif
|
||||
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user