Multi-line comments cleanup (#19535)

This commit is contained in:
qwewer0 2020-09-28 21:53:50 +02:00 committed by GitHub
parent 05517e2096
commit 4424645e04
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
131 changed files with 11 additions and 176 deletions

View File

@ -34,7 +34,6 @@
* - Extra features
*
* Advanced settings can be found in Configuration_adv.h
*
*/
#define CONFIGURATION_H_VERSION 020007
@ -855,7 +854,6 @@
* - For simple switches connect...
* - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32.
*
*/
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1567,7 +1565,6 @@
*
* Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change.
*
*/
//#define NOZZLE_CLEAN_FEATURE
@ -1720,7 +1717,6 @@
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*
*/
//#define SDSUPPORT
@ -2343,7 +2339,6 @@
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.
*
*/
//#define RGB_LED
//#define RGBW_LED

View File

@ -29,7 +29,6 @@
* Some of these settings can damage your printer if improperly set!
*
* Basic settings can be found in Configuration.h
*
*/
#define CONFIGURATION_ADV_H_VERSION 020007
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/
#ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0
@ -1954,7 +1952,6 @@
* Be sure to turn off auto-retract during filament change.
*
* Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/
//#define FWRETRACT
#if ENABLED(FWRETRACT)

View File

@ -15,6 +15,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -48,7 +48,6 @@
* readMicroseconds() - Get the last-written servo pulse width in microseconds.
* attached() - Return true if a servo is attached.
* detach() - Stop an attached servo from pulsing its i/o pin.
*
*/
#ifdef __AVR__

View File

@ -15,6 +15,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -759,7 +759,6 @@
*
* All of the above can be avoided by defining FORCE_SOFT_SPI to force the
* display to use software SPI.
*
*/
void spiInit(uint8_t spiRate=6) { // Default to slowest rate if not specified)

View File

@ -52,7 +52,6 @@
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#ifdef __SAM3X8E__

View File

@ -53,7 +53,6 @@
* per page. We can't emulate EE endurance with FLASH for all
* bytes, but we can emulate endurance for a given percent of
* bytes.
*
*/
//#define EE_EMU_DEBUG

View File

@ -179,5 +179,4 @@ void pwm_details(int32_t pin) {
* ----------------+--------
* ID | PB11
* VBOF | PB10
*
*/

View File

@ -15,6 +15,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -15,6 +15,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -33,7 +33,6 @@
* Generic RingBuffer
* T type of the buffer array
* S size of the buffer (must be power of 2)
*
*/
template <typename T, uint32_t S> class RingBuffer {
public:

View File

@ -45,7 +45,6 @@
* Version 2 Copyright (c) 2009 Michael Margolis. All right reserved.
*
* The only modification was to update/delete macros to match the LPC176x.
*
*/
#include <stdint.h>

View File

@ -46,7 +46,6 @@
* Version 2 Copyright (c) 2009 Michael Margolis. All right reserved.
*
* The only modification was to update/delete macros to match the LPC176x.
*
*/
#include <Servo.h>

View File

@ -21,7 +21,6 @@
#pragma once
/**
*
* HAL For LPC1768
*/

View File

@ -24,7 +24,6 @@
* THE SOFTWARE.
*
* Derived from Adafruit_SPIFlash class with no SdFat references
*
*/
#pragma once

View File

@ -150,5 +150,4 @@ void pwm_details(int32_t pin) {
* 93 | PA10 | QSPI: IO2
* 94 | PA11 | QSPI: IO3
* 95 | PB31 | SD: DETECT
*
*/

View File

@ -9,7 +9,6 @@
* No restriction on use. You can use, modify and redistribute it for
* personal, non-profit or commercial products UNDER YOUR RESPONSIBILITY.
* Redistributions of source code must retain the above copyright notice.
*
*/
#include "../../inc/MarlinConfig.h"

View File

@ -22,7 +22,6 @@
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
*/
#if defined(STM32GENERIC) && defined(STM32F7)
@ -662,7 +661,6 @@ boolean TMC26XStepper::isEnabled() { return !!(chopper_config_register & T_OFF_P
/**
* reads a value from the TMC26X status register. The value is not obtained directly but can then
* be read by the various status routines.
*
*/
void TMC26XStepper::readStatus(char read_value) {
uint32_t old_driver_configuration_register_value = driver_configuration_register_value;

View File

@ -22,7 +22,6 @@
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
*/
#pragma once

View File

@ -16,6 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -16,6 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -48,7 +48,6 @@
* readMicroseconds() - Get the last-written servo pulse width in microseconds.
* attached() - Return true if a servo is attached.
* detach() - Stop an attached servo from pulsing its i/o pin.
*
*/
#include "../../inc/MarlinConfig.h"

View File

@ -41,7 +41,6 @@
*/
/**
*
* A servo is activated by creating an instance of the Servo class passing the desired pin to the attach() method.
* The servos are pulsed in the background using the value most recently written using the write() method
*

View File

@ -348,7 +348,6 @@
* However, internal to Marlin E0/T0 is the first tool, and
* most board silkscreens say "E0." Zero-based labels will
* make these indexes consistent but this defies expectation.
*
*/
#if ENABLED(NUMBER_TOOLS_FROM_0)
#define LCD_FIRST_TOOL 0

View File

@ -236,9 +236,7 @@
}
/**
*
* Generic case of a line crossing both X and Y Mesh lines.
*
*/
xy_int8_t cnt = (istart - iend).ABS();

View File

@ -816,7 +816,6 @@ int8_t I2CPositionEncodersMgr::parse() {
* Y Report on Y axis encoder, if present.
* Z Report on Z axis encoder, if present.
* E Report on E axis encoder, if present.
*
*/
void I2CPositionEncodersMgr::M860() {
if (parse()) return;
@ -846,7 +845,6 @@ void I2CPositionEncodersMgr::M860() {
* Y Report on Y axis encoder, if present.
* Z Report on Z axis encoder, if present.
* E Report on E axis encoder, if present.
*
*/
void I2CPositionEncodersMgr::M861() {
if (parse()) return;
@ -875,7 +873,6 @@ void I2CPositionEncodersMgr::M861() {
* Y Report on Y axis encoder, if present.
* Z Report on Z axis encoder, if present.
* E Report on E axis encoder, if present.
*
*/
void I2CPositionEncodersMgr::M862() {
if (parse()) return;
@ -905,7 +902,6 @@ void I2CPositionEncodersMgr::M862() {
* Y Report on Y axis encoder, if present.
* Z Report on Z axis encoder, if present.
* E Report on E axis encoder, if present.
*
*/
void I2CPositionEncodersMgr::M863() {
if (parse()) return;

View File

@ -710,13 +710,11 @@ void MMU2::tool_change(const uint8_t index) {
}
/**
*
* Handle special T?/Tx/Tc commands
*
* T? Gcode to extrude shouldn't have to follow, load to extruder wheels is done automatically
* Tx Same as T?, except nozzle doesn't have to be preheated. Tc must be placed after extruder nozzle is preheated to finish filament load.
* Tc Load to nozzle after filament was prepared by Tx and extruder nozzle is already heated.
*
*/
void MMU2::tool_change(const char* special) {
if (!enabled) return;
@ -922,9 +920,7 @@ void MMU2::filament_runout() {
}
/**
*
* Switch material and load to nozzle
*
*/
bool MMU2::load_filament_to_nozzle(const uint8_t index) {

View File

@ -48,7 +48,6 @@ typedef void (*twiRequestFunc_t)();
* For more information see
* - https://marlinfw.org/docs/gcode/M260.html
* - https://marlinfw.org/docs/gcode/M261.html
*
*/
class TWIBus {
private:

View File

@ -160,7 +160,6 @@
* E By default G29 will engage the Z probe, test the bed, then disengage.
* Include "E" to engage/disengage the Z probe for each sample.
* There's no extra effect if you have a fixed Z probe.
*
*/
G29_TYPE GcodeSuite::G29() {

View File

@ -57,7 +57,6 @@ inline void echo_not_entered(const char c) { SERIAL_CHAR(c); SERIAL_ECHOLNPGM("
* S3 In Jn Zn.nn Manually modify a single point
* S4 Zn.nn Set z offset. Positive away from bed, negative closer to bed.
* S5 Reset and disable mesh
*
*/
void GcodeSuite::G29() {

View File

@ -192,7 +192,6 @@
* X Home to the X endstop
* Y Home to the Y endstop
* Z Home to the Z endstop
*
*/
void GcodeSuite::G28() {
DEBUG_SECTION(log_G28, "G28", DEBUGGING(LEVELING));

View File

@ -34,7 +34,6 @@
*
* Sending "M999 S1" will resume printing without flushing the
* existing command buffer.
*
*/
void GcodeSuite::M999() {
marlin_state = MF_RUNNING;

View File

@ -33,7 +33,6 @@
#include "../../../core/debug_out.h"
/**
*
* M906: report or set KVAL_HOLD which sets the maximum effective voltage provided by the
* PWMs to the steppers
*
@ -56,7 +55,6 @@
*
* L6470 is used in the STEP-CLOCK mode. KVAL_HOLD is the only KVAL_xxx
* that affects the effective voltage seen by the stepper.
*
*/
/**

View File

@ -37,7 +37,6 @@
#include "../../../core/debug_out.h"
/**
*
* M916: increase KVAL_HOLD until get thermal warning
* NOTE - on L6474 it is TVAL that is used
*
@ -62,7 +61,6 @@
*
* D - time (in seconds) to run each setting of KVAL_HOLD/TVAL
* optional - defaults to zero (runs each setting once)
*
*/
/**
@ -187,7 +185,6 @@ void GcodeSuite::M916() {
}
/**
*
* M917: Find minimum current thresholds
*
* Decrease OCD current until overcurrent error
@ -214,7 +211,6 @@ void GcodeSuite::M916() {
*
* K - value for KVAL_HOLD (0 - 255) (ignored for L6474)
* optional - will report current value from driver if not specified
*
*/
void GcodeSuite::M917() {
@ -522,7 +518,6 @@ void GcodeSuite::M917() {
}
/**
*
* M918: increase speed until error or max feedrate achieved (as shown in configuration.h))
*
* J - select which driver(s) to monitor on multi-driver axis
@ -543,7 +538,6 @@ void GcodeSuite::M917() {
*
* M - value for microsteps (1 - 128) (optional)
* optional - will report current value from driver if not specified
*
*/
void GcodeSuite::M918() {

View File

@ -42,7 +42,6 @@
*
* M260 S1 ; Send the buffered data and reset the buffer
* M260 R1 ; Reset the buffer without sending data
*
*/
void GcodeSuite::M260() {
// Set the target address

View File

@ -39,7 +39,6 @@
* T[toolhead] - Select extruder to configure, active extruder if not specified
* U[distance] - Retract distance for removal, for the specified extruder
* L[distance] - Extrude distance for insertion, for the specified extruder
*
*/
void GcodeSuite::M603() {

View File

@ -289,7 +289,6 @@
* "T" Codes
*
* T0-T3 - Select an extruder (tool) by index: "T<n> F<units/min>"
*
*/
#include "../inc/MarlinConfig.h"

View File

@ -38,7 +38,6 @@
* M32 !PATH/TO/FILE.GCO# ; Start FILE.GCO
* M32 P !PATH/TO/FILE.GCO# ; Start FILE.GCO as a procedure
* M32 S60 !PATH/TO/FILE.GCO# ; Start FILE.GCO at byte 60
*
*/
void GcodeSuite::M32() {
if (IS_SD_PRINTING()) planner.synchronize();

View File

@ -512,7 +512,6 @@
* HOTENDS - Number of hotends, whether connected or separate
* E_STEPPERS - Number of actual E stepper motors
* E_MANUAL - Number of E steppers for LCD move options
*
*/
#if EXTRUDERS == 0

View File

@ -11,7 +11,6 @@
* any later version. The code is distributed WITHOUT ANY WARRANTY;
* without even the implied warranty of MERCHANTABILITY or FITNESS
* FOR A PARTICULAR PURPOSE. See the GNU GPL for more details.
*
*/
/**

View File

@ -11,7 +11,6 @@
* any later version. The code is distributed WITHOUT ANY WARRANTY;
* without even the implied warranty of MERCHANTABILITY or FITNESS
* FOR A PARTICULAR PURPOSE. See the GNU GPL for more details.
*
*/
#pragma once

View File

@ -51,7 +51,6 @@
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#include "../../inc/MarlinConfig.h"

View File

@ -1632,7 +1632,6 @@ void update_variable() {
* TODO: New code can follow the pattern of menu_media.cpp
* and rely on Marlin caching for performance. No need to
* cache files here.
*
*/
#ifndef strcasecmp_P

View File

@ -42,7 +42,6 @@ constexpr uint32_t flash_eeprom_version = 1;
* 0 16 DATA STORAGE AREA
* 16 1 VERSIONING DATA
* 17 inf MEDIA STORAGE AREA
*
*/
#define DATA_STORAGE_SIZE_64K

View File

@ -32,7 +32,6 @@
* Selecting an LCD Display
* Version 2.1
* Issue Date: 2017-11-14
*
*/
#define COMPUTE_REGS_FROM_DATASHEET \
constexpr uint16_t Hoffset = thfp + thb - 1; \

View File

@ -109,7 +109,6 @@ namespace FTDI {
* - Handles auto-repetition by sending onTouchHeld to the active screen periodically.
* - Plays touch feedback "click" sounds when appropriate.
* - Performs debouncing to supress spurious touch events.
*
*/
void EventLoop::process_events() {
// If the LCD is processing commands, don't check

View File

@ -49,7 +49,6 @@
* ...
* }
* }
*
*/
class PolyReader {

View File

@ -375,7 +375,6 @@ namespace ExtUI {
* constexpr float increment = 10;
*
* UI_INCREMENT(TargetTemp_celsius, E0)
*
*/
#define UI_INCREMENT_BY(method, inc, ...) ExtUI::set ## method(ExtUI::get ## method (__VA_ARGS__) + inc, ##__VA_ARGS__)
#define UI_DECREMENT_BY(method, inc, ...) ExtUI::set ## method(ExtUI::get ## method (__VA_ARGS__) - inc, ##__VA_ARGS__)

View File

@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
*
*/
#define DISPLAY_CHARSET_ISO10646_1

View File

@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
*
*/
#define DISPLAY_CHARSET_ISO10646_5

View File

@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
*
*/
namespace Language_ca {
using namespace Language_en; // Inherit undefined strings from English

View File

@ -31,7 +31,6 @@
* Translated by Petr Zahradnik, Computer Laboratory
* Blog and video blog Zahradnik se bavi
* https://www.zahradniksebavi.cz
*
*/
#define DISPLAY_CHARSET_ISO10646_CZ

View File

@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
*
*/
#define DISPLAY_CHARSET_ISO10646_1

View File

@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
*
*/
namespace Language_de {

View File

@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
*
*/
#define DISPLAY_CHARSET_ISO10646_GREEK

View File

@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
*
*/
#define DISPLAY_CHARSET_ISO10646_GREEK

View File

@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
*
*/
#define en 1234

View File

@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
*
*/
namespace Language_es {

View File

@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
*
*/
#define DISPLAY_CHARSET_ISO10646_1

View File

@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
*
*/
#define DISPLAY_CHARSET_ISO10646_1

View File

@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
*
*/
#define DISPLAY_CHARSET_ISO10646_1

View File

@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
*
*/
#define DISPLAY_CHARSET_ISO10646_1

View File

@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
*
*/
#define DISPLAY_CHARSET_ISO10646_1 // use the better font on full graphic displays.

View File

@ -29,7 +29,6 @@
* A Magyar fordítást készítette: AntoszHUN
*
*
*
*/
namespace Language_hu {

View File

@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
*
*/
#define DISPLAY_CHARSET_ISO10646_1

View File

@ -27,7 +27,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
*
*/
//#define DISPLAY_CHARSET_ISO10646_KANA

View File

@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
*
*/
namespace Language_ko_KR {
using namespace Language_en; // Inherit undefined strings from English

View File

@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
*
*/
#define DISPLAY_CHARSET_ISO10646_1

View File

@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
*
*/
#define DISPLAY_CHARSET_ISO10646_PL

View File

@ -27,7 +27,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
*
*/
#define DISPLAY_CHARSET_ISO10646_1

View File

@ -27,7 +27,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
*
*/
namespace Language_pt_br {
using namespace Language_en; // Inherit undefined strings from English

View File

@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
*
*/
#define DISPLAY_CHARSET_ISO10646_5

View File

@ -30,7 +30,6 @@
*
* Translated by Michal Holeš, Farma MaM
* https://www.facebook.com/farmamam
*
*/
#define DISPLAY_CHARSET_ISO10646_SK

View File

@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
*
*/
// Select ONE of the following Mappers.

View File

@ -30,7 +30,6 @@
* Bu çeviri dosyasındaki sorunlar ve düzeltmeler için iletişim;
* Contact for issues and corrections in this translation file;
* Yücel Temel - (info@elektromanyetix.com) - https://elektromanyetix.com/
*
*/
#define DISPLAY_CHARSET_ISO10646_TR

View File

@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
*
*/
#define DISPLAY_CHARSET_ISO10646_5

View File

@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
*
*/
namespace Language_vi {
using namespace Language_en; // Inherit undefined strings from English

View File

@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
*
*/
namespace Language_zh_CN {
using namespace Language_en; // Inherit undefined strings from English

View File

@ -26,7 +26,6 @@
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
*
*/
namespace Language_zh_TW {
using namespace Language_en; // Inherit undefined strings from English

View File

@ -101,9 +101,7 @@ void _menu_temp_filament_op(const PauseMode mode, const int8_t extruder) {
}
/**
*
* "Change Filament" submenu
*
*/
#if E_STEPPERS > 1 || ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)

View File

@ -29,7 +29,6 @@
* it saves roughly 10K of program memory. It also does not require all of
* coordinates to be present during the calculations. Each point can be
* probed and then discarded.
*
*/
#include "../inc/MarlinConfig.h"

View File

@ -30,7 +30,6 @@
* it saves roughly 10K of program memory. And even better... the data
* fed into the algorithm does not need to all be present at the same time.
* A point can be probed and its values fed into the algorithm and then discarded.
*
*/
#include "../inc/MarlinConfig.h"

View File

@ -339,7 +339,6 @@ void Planner::init() {
* const uint32_t r = _BV(24) - x * d; // Estimate remainder
* if (r >= d) x++; // Check whether to adjust result
* return uint32_t(x); // x holds the proper estimation
*
*/
static uint32_t get_period_inverse(uint32_t d) {
@ -2243,7 +2242,6 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
#define MAX_E_JERK(N) TERN(HAS_LINEAR_E_JERK, max_e_jerk[E_INDEX_N(N)], max_jerk.e)
/**
*
* Use LIN_ADVANCE for blocks if all these are true:
*
* esteps : This is a print move, because we checked for A, B, C steps before.

View File

@ -24,7 +24,6 @@
* planner_bezier.cpp
*
* Compute and buffer movement commands for bezier curves
*
*/
#include "../inc/MarlinConfig.h"

View File

@ -25,7 +25,6 @@
* planner_bezier.h
*
* Compute and buffer movement commands for Bézier curves
*
*/
#include "../core/types.h"

View File

@ -729,7 +729,6 @@ float Probe::probe_at_point(const float &rx, const float &ry, const ProbePtRaise
* when starting up the machine or rebooting the board.
* There's no way to know where the nozzle is positioned until
* homing has been done - no homing with z-probe without init!
*
*/
STOW_Z_SERVO();
}

View File

@ -33,7 +33,6 @@
* ALSO: Variables in the Store and Retrieve sections must be in the same order.
* If a feature is disabled, some data must still be written that, when read,
* either sets a Sane Default, or results in No Change to the existing value.
*
*/
// Change EEPROM version if the structure changes

View File

@ -27,7 +27,6 @@
* Applies to the following boards:
*
* BOARD_BIQU_BQ111_A4 (Hotend, Fan, Bed)
*
*/
#if NOT_TARGET(MCU_LPC1768)

View File

@ -27,7 +27,6 @@
* Applies to the following boards:
*
* BOARD_BIQU_BQ111_A4 (Hotend, Fan, Bed)
*
*/
#if NOT_TARGET(MCU_LPC1768)

View File

@ -372,7 +372,6 @@
* P1_31 - not 5V tolerant - EXP1
* P0_27 - open collector - EXP2
* P0_28 - open collector - EXP2
*
*/
/**
@ -387,5 +386,4 @@
* P0_03 - AUX1
* P0_29 - Port -1
* P0_30 - USB
*
*/

View File

@ -31,7 +31,6 @@
* RAMPS_14_EFF (Hotend, Fan0, Fan1)
* RAMPS_14_EEF (Hotend0, Hotend1, Fan)
* RAMPS_14_SF (Spindle, Controller Fan)
*
*/
// Numbers in parentheses () are the corresponding mega2560 pin numbers

View File

@ -16,7 +16,7 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -26,7 +26,6 @@
*
* The pins diagram can be found and the following URL:
* https://github.com/makerbase-mks/MKS-SGen/blob/master/Hardware/MKS%20SGEN%20V1.0_001/MKS%20SGEN%20V1.0_001%20PIN.pdf
*
*/
#if NOT_TARGET(MCU_LPC1769)

View File

@ -166,7 +166,6 @@
*
* A remote SD card is currently not supported because the pins routed to the EXP2
* connector are shared with the onboard SD card.
*
*/
#if ENABLED(CR10_STOCKDISPLAY)

View File

@ -137,7 +137,6 @@
///////////////////// SPARE HEADERS //////////////
/**
*
* J25
* 1 D54
* 2 D55

View File

@ -29,7 +29,6 @@
* Rev B 2 JAN 2017
*
* Added pin definitions for M3, M4 & M5 spindle control commands
*
*/
#if NOT_TARGET(__AVR_ATmega1281__)

View File

@ -31,7 +31,6 @@
*
* Both passes use the same pin list. The list contains two macro names. The
* actual macro definitions are changed depending on which pass is being done.
*
*/
// first pass - put the name strings into FLASH

View File

@ -31,7 +31,6 @@
* RAMPS_13_EFF (Extruder, Fan, Fan)
* RAMPS_13_EEF (Extruder, Extruder, Fan)
* RAMPS_13_SF (Spindle, Controller Fan)
*
*/
#ifndef BOARD_INFO_NAME

View File

@ -35,7 +35,6 @@
* RAMPS_PLUS_EFF (Extruder, Fan, Fan)
* RAMPS_PLUS_EEF (Extruder, Extruder, Fan)
* RAMPS_PLUS_SF (Spindle, Controller Fan)
*
*/
#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__)

Some files were not shown because too many files have changed in this diff Show More