Fix issues with no hotend / bed / fan (#18395)
This commit is contained in:
parent
b0aad414ec
commit
4275466f49
@ -541,7 +541,7 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
|
||||
case 120: M120(); break; // M120: Enable endstops
|
||||
case 121: M121(); break; // M121: Disable endstops
|
||||
|
||||
#if HAS_HOTEND && HAS_LCD_MENU
|
||||
#if PREHEAT_COUNT
|
||||
case 145: M145(); break; // M145: Set material heatup parameters
|
||||
#endif
|
||||
|
||||
|
@ -608,7 +608,7 @@ private:
|
||||
static void M191();
|
||||
#endif
|
||||
|
||||
#if HAS_HOTEND && HAS_LCD_MENU
|
||||
#if PREHEAT_COUNT
|
||||
static void M145();
|
||||
#endif
|
||||
|
||||
|
@ -22,7 +22,7 @@
|
||||
|
||||
#include "../../inc/MarlinConfig.h"
|
||||
|
||||
#if HAS_HOTEND && HAS_LCD_MENU
|
||||
#if PREHEAT_COUNT
|
||||
|
||||
#include "../gcode.h"
|
||||
#include "../../lcd/ultralcd.h"
|
||||
@ -37,25 +37,23 @@
|
||||
*/
|
||||
void GcodeSuite::M145() {
|
||||
const uint8_t material = (uint8_t)parser.intval('S');
|
||||
if (material >= COUNT(ui.preheat_hotend_temp))
|
||||
if (material >= PREHEAT_COUNT)
|
||||
SERIAL_ERROR_MSG(STR_ERR_MATERIAL_INDEX);
|
||||
else {
|
||||
int v;
|
||||
if (parser.seenval('H')) {
|
||||
v = parser.value_int();
|
||||
ui.preheat_hotend_temp[material] = constrain(v, EXTRUDE_MINTEMP, (HEATER_0_MAXTEMP) - (HOTEND_OVERSHOOT));
|
||||
}
|
||||
if (parser.seenval('F')) {
|
||||
v = parser.value_int();
|
||||
ui.preheat_fan_speed[material] = (uint8_t)constrain(v, 0, 255);
|
||||
}
|
||||
preset_t &mat = ui.material_preset[material];
|
||||
#if HAS_HOTEND
|
||||
if (parser.seenval('H'))
|
||||
mat.hotend_temp = constrain(parser.value_int(), EXTRUDE_MINTEMP, (HEATER_0_MAXTEMP) - (HOTEND_OVERSHOOT));
|
||||
#endif
|
||||
#if TEMP_SENSOR_BED != 0
|
||||
if (parser.seenval('B')) {
|
||||
v = parser.value_int();
|
||||
ui.preheat_bed_temp[material] = constrain(v, BED_MINTEMP, BED_MAX_TARGET);
|
||||
}
|
||||
if (parser.seenval('B'))
|
||||
mat.bed_temp = constrain(parser.value_int(), BED_MINTEMP, BED_MAX_TARGET);
|
||||
#endif
|
||||
#if HAS_FAN
|
||||
if (parser.seenval('F'))
|
||||
mat.fan_speed = constrain(parser.value_int(), 0, 255);
|
||||
#endif
|
||||
}
|
||||
}
|
||||
|
||||
#endif // HOTENDS && HAS_LCD_MENU
|
||||
#endif // PREHEAT_COUNT
|
||||
|
@ -1859,6 +1859,10 @@
|
||||
#define HAS_CONTROLLER_FAN 1
|
||||
#endif
|
||||
|
||||
#if BED_OR_CHAMBER || HAS_FAN0
|
||||
#define BED_OR_CHAMBER_OR_FAN 1
|
||||
#endif
|
||||
|
||||
// Servos
|
||||
#if PIN_EXISTS(SERVO0) && NUM_SERVOS > 0
|
||||
#define HAS_SERVO_0 1
|
||||
@ -2080,6 +2084,16 @@
|
||||
#define WRITE_HEATER_CHAMBER(v) WRITE(HEATER_CHAMBER_PIN, (v) ^ HEATER_CHAMBER_INVERTING)
|
||||
#endif
|
||||
|
||||
#if HAS_HOTEND || HAS_HEATED_BED || HAS_HEATED_CHAMBER
|
||||
#define HAS_TEMPERATURE 1
|
||||
#endif
|
||||
|
||||
#if HAS_TEMPERATURE && EITHER(HAS_LCD_MENU, DWIN_CREALITY_LCD)
|
||||
#define PREHEAT_COUNT 2
|
||||
#else
|
||||
#undef PREHEAT_COUNT
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Up to 3 PWM fans
|
||||
*/
|
||||
|
@ -1404,12 +1404,16 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
||||
|
||||
#endif
|
||||
|
||||
#if HAS_MESH
|
||||
#if HAS_CLASSIC_JERK
|
||||
#if HAS_MESH && HAS_CLASSIC_JERK
|
||||
static_assert(DEFAULT_ZJERK > 0.1, "Low DEFAULT_ZJERK values are incompatible with mesh-based leveling.");
|
||||
#endif
|
||||
#elif ENABLED(G26_MESH_VALIDATION)
|
||||
#endif
|
||||
|
||||
#if ENABLED(G26_MESH_VALIDATION)
|
||||
#if !EXTRUDERS
|
||||
#error "G26_MESH_VALIDATION requires at least one extruder."
|
||||
#elif !HAS_MESH
|
||||
#error "G26_MESH_VALIDATION requires MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, or AUTO_BED_LEVELING_UBL."
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if ENABLED(MESH_EDIT_GFX_OVERLAY) && !BOTH(AUTO_BED_LEVELING_UBL, HAS_GRAPHICAL_LCD)
|
||||
|
@ -860,8 +860,6 @@
|
||||
#define STATUS_CHAMBER_WIDTH 0
|
||||
#endif
|
||||
|
||||
#define BED_OR_CHAMBER_OR_FAN (BED_OR_CHAMBER || HAS_FAN0)
|
||||
|
||||
// Can also be overridden in Configuration_adv.h
|
||||
// If you can afford it, try the 3-frame fan animation!
|
||||
// Don't compile in the fan animation with no fan
|
||||
|
@ -87,7 +87,7 @@ HMI_Flag HMI_flag{0};
|
||||
|
||||
millis_t Encoder_ms = 0;
|
||||
millis_t Wait_ms = 0;
|
||||
millis_t heat_time = 0;
|
||||
millis_t dwin_heat_time = 0;
|
||||
|
||||
int checkkey = 0, last_checkkey = 0;
|
||||
|
||||
@ -743,7 +743,9 @@ inline void Draw_Popup_Bkgd_60() {
|
||||
DWIN_Draw_Rectangle(1, Background_window, 14, 60, 271-13, 330);
|
||||
}
|
||||
|
||||
void Popup_Window_ETempTooLow(void) {
|
||||
#if HAS_HOTEND
|
||||
|
||||
void Popup_Window_ETempTooLow(void) {
|
||||
Clear_Main_Window();
|
||||
Draw_Popup_Bkgd_60();
|
||||
DWIN_ICON_Show(ICON, ICON_TempTooLow, 102, 105);
|
||||
@ -756,7 +758,9 @@ void Popup_Window_ETempTooLow(void) {
|
||||
DWIN_Draw_String(false,true,font8x16, Font_window, Background_window, 20, 235, (char*)"Nozzle is too cold");
|
||||
DWIN_ICON_Show(ICON, ICON_Confirm_E, 86, 280);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
void Popup_Window_Resume(void) {
|
||||
Clear_Popup_Area();
|
||||
@ -1074,7 +1078,9 @@ void HMI_Zoffset(void) {
|
||||
}
|
||||
}
|
||||
|
||||
void HMI_ETemp(void) {
|
||||
#if HAS_HOTEND
|
||||
|
||||
void HMI_ETemp(void) {
|
||||
ENCODER_DiffState encoder_diffState = Encoder_ReceiveAnalyze();
|
||||
if (encoder_diffState != ENCODER_DIFF_NO) {
|
||||
if (encoder_diffState == ENCODER_DIFF_CW)
|
||||
@ -1089,14 +1095,14 @@ void HMI_ETemp(void) {
|
||||
}
|
||||
else if (HMI_ValueStruct.show_mode == -2) {
|
||||
checkkey = PLAPreheat;
|
||||
HMI_ValueStruct.preheat_hotend_temp[0] = HMI_ValueStruct.E_Temp;
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(1), HMI_ValueStruct.preheat_hotend_temp[0]);
|
||||
ui.material_preset[0].hotend_temp = HMI_ValueStruct.E_Temp;
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(1), ui.material_preset[0].hotend_temp);
|
||||
return;
|
||||
}
|
||||
else if (HMI_ValueStruct.show_mode == -3) {
|
||||
checkkey = ABSPreheat;
|
||||
HMI_ValueStruct.preheat_hotend_temp[1] = HMI_ValueStruct.E_Temp;
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(1), HMI_ValueStruct.preheat_hotend_temp[1]);
|
||||
ui.material_preset[1].hotend_temp = HMI_ValueStruct.E_Temp;
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(1), ui.material_preset[1].hotend_temp);
|
||||
return;
|
||||
}
|
||||
else { // tune
|
||||
@ -1115,9 +1121,13 @@ void HMI_ETemp(void) {
|
||||
else // other page
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(1), HMI_ValueStruct.E_Temp);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
void HMI_BedTemp(void) {
|
||||
#endif
|
||||
|
||||
#if HAS_HEATED_BED
|
||||
|
||||
void HMI_BedTemp(void) {
|
||||
ENCODER_DiffState encoder_diffState = Encoder_ReceiveAnalyze();
|
||||
if (encoder_diffState != ENCODER_DIFF_NO) {
|
||||
if (encoder_diffState == ENCODER_DIFF_CW)
|
||||
@ -1132,14 +1142,14 @@ void HMI_BedTemp(void) {
|
||||
}
|
||||
else if (HMI_ValueStruct.show_mode == -2) {
|
||||
checkkey = PLAPreheat;
|
||||
HMI_ValueStruct.preheat_bed_temp[0] = HMI_ValueStruct.Bed_Temp;
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(2), HMI_ValueStruct.preheat_bed_temp[0]);
|
||||
ui.material_preset[0].bed_temp = HMI_ValueStruct.Bed_Temp;
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(2), ui.material_preset[0].bed_temp);
|
||||
return;
|
||||
}
|
||||
else if (HMI_ValueStruct.show_mode == -3) {
|
||||
checkkey = ABSPreheat;
|
||||
HMI_ValueStruct.preheat_bed_temp[1] = HMI_ValueStruct.Bed_Temp;
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(2), HMI_ValueStruct.preheat_bed_temp[1]);
|
||||
ui.material_preset[1].bed_temp = HMI_ValueStruct.Bed_Temp;
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(2), ui.material_preset[1].bed_temp);
|
||||
return;
|
||||
}
|
||||
else {
|
||||
@ -1158,9 +1168,13 @@ void HMI_BedTemp(void) {
|
||||
else // other page
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(2), HMI_ValueStruct.Bed_Temp);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
void HMI_FanSpeed(void) {
|
||||
#endif
|
||||
|
||||
#if HAS_FAN
|
||||
|
||||
void HMI_FanSpeed(void) {
|
||||
ENCODER_DiffState encoder_diffState = Encoder_ReceiveAnalyze();
|
||||
if (encoder_diffState != ENCODER_DIFF_NO) {
|
||||
if (encoder_diffState == ENCODER_DIFF_CW)
|
||||
@ -1175,14 +1189,14 @@ void HMI_FanSpeed(void) {
|
||||
}
|
||||
else if (HMI_ValueStruct.show_mode == -2) {
|
||||
checkkey = PLAPreheat;
|
||||
HMI_ValueStruct.preheat_fan_speed[0] = HMI_ValueStruct.Fan_speed;
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(3), HMI_ValueStruct.preheat_fan_speed[0]);
|
||||
ui.material_preset[0].fan_speed = HMI_ValueStruct.Fan_speed;
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(3), ui.material_preset[0].fan_speed);
|
||||
return;
|
||||
}
|
||||
else if (HMI_ValueStruct.show_mode == -3) {
|
||||
checkkey = ABSPreheat;
|
||||
HMI_ValueStruct.preheat_fan_speed[1] = HMI_ValueStruct.Fan_speed;
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(3), HMI_ValueStruct.preheat_fan_speed[1]);
|
||||
ui.material_preset[1].fan_speed = HMI_ValueStruct.Fan_speed;
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(3), ui.material_preset[1].fan_speed);
|
||||
return;
|
||||
}
|
||||
else {
|
||||
@ -1201,7 +1215,9 @@ void HMI_FanSpeed(void) {
|
||||
else // other page
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(3), HMI_ValueStruct.Fan_speed);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
void HMI_PrintSpeed(void) {
|
||||
ENCODER_DiffState encoder_diffState = Encoder_ReceiveAnalyze();
|
||||
@ -1238,7 +1254,9 @@ void HMI_MaxFeedspeedXYZE(void) {
|
||||
if (HMI_flag.feedspeed_flag == X_AXIS) planner.set_max_feedrate(X_AXIS, HMI_ValueStruct.Max_Feedspeed);
|
||||
else if (HMI_flag.feedspeed_flag == Y_AXIS) planner.set_max_feedrate(Y_AXIS, HMI_ValueStruct.Max_Feedspeed);
|
||||
else if (HMI_flag.feedspeed_flag == Z_AXIS) planner.set_max_feedrate(Z_AXIS, HMI_ValueStruct.Max_Feedspeed);
|
||||
#if HAS_HOTEND
|
||||
else if (HMI_flag.feedspeed_flag == E_AXIS) planner.set_max_feedrate(E_AXIS, HMI_ValueStruct.Max_Feedspeed);
|
||||
#endif
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 4, 210, MBASE(select_speed.now), HMI_ValueStruct.Max_Feedspeed);
|
||||
return;
|
||||
}
|
||||
@ -1246,7 +1264,9 @@ void HMI_MaxFeedspeedXYZE(void) {
|
||||
if (HMI_flag.feedspeed_flag == X_AXIS) {if (HMI_ValueStruct.Max_Feedspeed > default_max_feedrate[X_AXIS]*2) HMI_ValueStruct.Max_Feedspeed = default_max_feedrate[X_AXIS]*2;}
|
||||
else if (HMI_flag.feedspeed_flag == Y_AXIS) {if (HMI_ValueStruct.Max_Feedspeed > default_max_feedrate[Y_AXIS]*2) HMI_ValueStruct.Max_Feedspeed = default_max_feedrate[Y_AXIS]*2;}
|
||||
else if (HMI_flag.feedspeed_flag == Z_AXIS) {if (HMI_ValueStruct.Max_Feedspeed > default_max_feedrate[Z_AXIS]*2) HMI_ValueStruct.Max_Feedspeed = default_max_feedrate[Z_AXIS]*2;}
|
||||
#if HAS_HOTEND
|
||||
else if (HMI_flag.feedspeed_flag == E_AXIS) {if (HMI_ValueStruct.Max_Feedspeed > default_max_feedrate[E_AXIS]*2) HMI_ValueStruct.Max_Feedspeed = default_max_feedrate[E_AXIS]*2;}
|
||||
#endif
|
||||
if (HMI_ValueStruct.Max_Feedspeed < min_MaxFeedspeed) HMI_ValueStruct.Max_Feedspeed = min_MaxFeedspeed;
|
||||
//MaxFeedspeed value
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 4, 210, MBASE(select_speed.now), HMI_ValueStruct.Max_Feedspeed);
|
||||
@ -1264,7 +1284,9 @@ void HMI_MaxAccelerationXYZE(void) {
|
||||
if (HMI_flag.acc_flag == X_AXIS) planner.set_max_acceleration(X_AXIS, HMI_ValueStruct.Max_Acceleration);
|
||||
else if (HMI_flag.acc_flag == Y_AXIS) planner.set_max_acceleration(Y_AXIS, HMI_ValueStruct.Max_Acceleration);
|
||||
else if (HMI_flag.acc_flag == Z_AXIS) planner.set_max_acceleration(Z_AXIS, HMI_ValueStruct.Max_Acceleration);
|
||||
#if HAS_HOTEND
|
||||
else if (HMI_flag.acc_flag == E_AXIS) planner.set_max_acceleration(E_AXIS, HMI_ValueStruct.Max_Acceleration);
|
||||
#endif
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 4, 210, MBASE(select_acc.now), HMI_ValueStruct.Max_Acceleration);
|
||||
return;
|
||||
}
|
||||
@ -1272,7 +1294,9 @@ void HMI_MaxAccelerationXYZE(void) {
|
||||
if (HMI_flag.acc_flag == X_AXIS) {if (HMI_ValueStruct.Max_Acceleration > default_max_acceleration[X_AXIS]*2) HMI_ValueStruct.Max_Acceleration = default_max_acceleration[X_AXIS]*2;}
|
||||
else if (HMI_flag.acc_flag == Y_AXIS) {if (HMI_ValueStruct.Max_Acceleration > default_max_acceleration[Y_AXIS]*2) HMI_ValueStruct.Max_Acceleration = default_max_acceleration[Y_AXIS]*2;}
|
||||
else if (HMI_flag.acc_flag == Z_AXIS) {if (HMI_ValueStruct.Max_Acceleration > default_max_acceleration[Z_AXIS]*2) HMI_ValueStruct.Max_Acceleration = default_max_acceleration[Z_AXIS]*2;}
|
||||
#if HAS_HOTEND
|
||||
else if (HMI_flag.acc_flag == E_AXIS) {if (HMI_ValueStruct.Max_Acceleration > default_max_acceleration[E_AXIS]*2) HMI_ValueStruct.Max_Acceleration = default_max_acceleration[E_AXIS]*2;}
|
||||
#endif
|
||||
if (HMI_ValueStruct.Max_Acceleration < min_MaxAcceleration) HMI_ValueStruct.Max_Acceleration = min_MaxAcceleration;
|
||||
// MaxAcceleration value
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 4, 210, MBASE(select_acc.now), HMI_ValueStruct.Max_Acceleration);
|
||||
@ -2105,14 +2129,14 @@ void HMI_Prepare(void) {
|
||||
#endif
|
||||
break;
|
||||
case 5: // PLA preheat
|
||||
thermalManager.setTargetHotend(HMI_ValueStruct.preheat_hotend_temp[0], 0);
|
||||
thermalManager.setTargetBed(HMI_ValueStruct.preheat_bed_temp[0]);
|
||||
thermalManager.set_fan_speed(0, HMI_ValueStruct.preheat_fan_speed[0]);
|
||||
thermalManager.setTargetHotend(ui.material_preset[0].hotend_temp, 0);
|
||||
thermalManager.setTargetBed(ui.material_preset[0].bed_temp);
|
||||
thermalManager.set_fan_speed(0, ui.material_preset[0].fan_speed);
|
||||
break;
|
||||
case 6: // ABS preheat
|
||||
thermalManager.setTargetHotend(HMI_ValueStruct.preheat_hotend_temp[1], 0);
|
||||
thermalManager.setTargetBed(HMI_ValueStruct.preheat_bed_temp[1]);
|
||||
thermalManager.set_fan_speed(0, HMI_ValueStruct.preheat_fan_speed[1]);
|
||||
thermalManager.setTargetHotend(ui.material_preset[1].hotend_temp, 0);
|
||||
thermalManager.setTargetBed(ui.material_preset[1].bed_temp);
|
||||
thermalManager.set_fan_speed(0, ui.material_preset[1].fan_speed);
|
||||
break;
|
||||
case 7: // cool
|
||||
thermalManager.zero_fan_speeds();
|
||||
@ -2287,6 +2311,7 @@ void HMI_AxisMove(void) {
|
||||
ENCODER_DiffState encoder_diffState = get_encoder_state();
|
||||
if (encoder_diffState == ENCODER_DIFF_NO) return;
|
||||
|
||||
#if HAS_HOTEND
|
||||
// popup window resume
|
||||
if (HMI_flag.ETempTooLow_flag) {
|
||||
if (encoder_diffState == ENCODER_DIFF_ENTER) {
|
||||
@ -2301,6 +2326,8 @@ void HMI_AxisMove(void) {
|
||||
}
|
||||
return;
|
||||
}
|
||||
#endif
|
||||
|
||||
// Avoid flicker by updating only the previous menu
|
||||
if (encoder_diffState == ENCODER_DIFF_CW) {
|
||||
if (select_axis.inc(4)) Move_Highlight(1, select_axis.now);
|
||||
@ -2334,6 +2361,7 @@ void HMI_AxisMove(void) {
|
||||
DWIN_Draw_FloatValue(true,true,0,font8x16,White,Select_Color, 3, 1, 216, MBASE(3), HMI_ValueStruct.Move_Z_scale);
|
||||
EncoderRate.encoderRateEnabled = 1;
|
||||
break;
|
||||
#if HAS_HOTEND
|
||||
case 4: // Extruder
|
||||
// window tips
|
||||
#ifdef PREVENT_COLD_EXTRUSION
|
||||
@ -2349,13 +2377,14 @@ void HMI_AxisMove(void) {
|
||||
show_plus_or_minus(font8x16, Select_Color, 3, 1, 216, MBASE(4), HMI_ValueStruct.Move_E_scale);
|
||||
EncoderRate.encoderRateEnabled = 1;
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
#endif
|
||||
}
|
||||
}
|
||||
DWIN_UpdateLCD();
|
||||
}
|
||||
|
||||
enum
|
||||
|
||||
/* TemperatureID */
|
||||
void HMI_Temperature(void) {
|
||||
ENCODER_DiffState encoder_diffState = get_encoder_state();
|
||||
@ -2376,24 +2405,31 @@ void HMI_Temperature(void) {
|
||||
index_control = MROWS;
|
||||
Draw_Control_Menu();
|
||||
break;
|
||||
#if HAS_HOTEND
|
||||
case 1: // nozzle temperature
|
||||
checkkey = ETemp;
|
||||
HMI_ValueStruct.E_Temp = thermalManager.temp_hotend[0].target;
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(1), thermalManager.temp_hotend[0].target);
|
||||
EncoderRate.encoderRateEnabled = 1;
|
||||
break;
|
||||
#endif
|
||||
#if HAS_HEATED_BED
|
||||
case 2: // bed temperature
|
||||
checkkey = BedTemp;
|
||||
HMI_ValueStruct.Bed_Temp = thermalManager.temp_bed.target;
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(2), thermalManager.temp_bed.target);
|
||||
EncoderRate.encoderRateEnabled = 1;
|
||||
break;
|
||||
#endif
|
||||
#if HAS_FAN
|
||||
case 3: // fan speed
|
||||
checkkey = FanSpeed;
|
||||
HMI_ValueStruct.Fan_speed = thermalManager.fan_speed[0];
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(3), thermalManager.fan_speed[0]);
|
||||
EncoderRate.encoderRateEnabled = 1;
|
||||
break;
|
||||
#endif
|
||||
#if HAS_HOTEND
|
||||
case 4: // PLA preheat setting
|
||||
|
||||
checkkey = PLAPreheat;
|
||||
@ -2438,9 +2474,9 @@ void HMI_Temperature(void) {
|
||||
Draw_Menu_Line(3, ICON_FanSpeed);
|
||||
Draw_Menu_Line(4, ICON_WriteEEPROM);
|
||||
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(1), HMI_ValueStruct.preheat_hotend_temp[0]);
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(2), HMI_ValueStruct.preheat_bed_temp[0]);
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(3), HMI_ValueStruct.preheat_fan_speed[0]);
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(1), ui.material_preset[0].hotend_temp);
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(2), ui.material_preset[0].bed_temp);
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(3), ui.material_preset[0].fan_speed);
|
||||
|
||||
break;
|
||||
case 5: // ABS preheat setting
|
||||
@ -2489,13 +2525,12 @@ void HMI_Temperature(void) {
|
||||
Draw_Menu_Line(3, ICON_FanSpeed);
|
||||
Draw_Menu_Line(4, ICON_WriteEEPROM);
|
||||
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(1), HMI_ValueStruct.preheat_hotend_temp[1]);
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(2), HMI_ValueStruct.preheat_bed_temp[1]);
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(3), HMI_ValueStruct.preheat_fan_speed[1]);
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(1), ui.material_preset[1].hotend_temp);
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(2), ui.material_preset[1].bed_temp);
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(3), ui.material_preset[1].fan_speed);
|
||||
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
#endif
|
||||
}
|
||||
}
|
||||
DWIN_UpdateLCD();
|
||||
@ -2792,24 +2827,30 @@ void HMI_Tune(void) {
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(1+MROWS-index_tune), feedrate_percentage);
|
||||
EncoderRate.encoderRateEnabled = 1;
|
||||
break;
|
||||
#if HAS_HOTEND
|
||||
case 2: // nozzle temp
|
||||
checkkey = ETemp;
|
||||
HMI_ValueStruct.E_Temp = thermalManager.temp_hotend[0].target;
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(2+MROWS-index_tune), thermalManager.temp_hotend[0].target);
|
||||
EncoderRate.encoderRateEnabled = 1;
|
||||
break;
|
||||
#endif
|
||||
#if HAS_HEATED_BED
|
||||
case 3: // bed temp
|
||||
checkkey = BedTemp;
|
||||
HMI_ValueStruct.Bed_Temp = thermalManager.temp_bed.target;
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(3+MROWS-index_tune), thermalManager.temp_bed.target);
|
||||
EncoderRate.encoderRateEnabled = 1;
|
||||
break;
|
||||
#endif
|
||||
#if HAS_FAN
|
||||
case 4: // fan speed
|
||||
checkkey = FanSpeed;
|
||||
HMI_ValueStruct.Fan_speed = thermalManager.fan_speed[0];
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(4+MROWS-index_tune), thermalManager.fan_speed[0]);
|
||||
EncoderRate.encoderRateEnabled = 1;
|
||||
break;
|
||||
#endif
|
||||
case 5: // z-offset
|
||||
checkkey = Homeoffset;
|
||||
HMI_ValueStruct.offset_value = BABY_Z_VAR * 100;
|
||||
@ -2860,24 +2901,30 @@ void HMI_PLAPreheatSetting(void) {
|
||||
HMI_ValueStruct.show_mode = -1;
|
||||
Draw_Temperature_Menu();
|
||||
break;
|
||||
#if HAS_HOTEND
|
||||
case 1: // set nozzle temperature
|
||||
checkkey = ETemp;
|
||||
HMI_ValueStruct.E_Temp = HMI_ValueStruct.preheat_hotend_temp[0];
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(1), HMI_ValueStruct.preheat_hotend_temp[0]);
|
||||
HMI_ValueStruct.E_Temp = ui.material_preset[0].hotend_temp;
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(1), ui.material_preset[0].hotend_temp);
|
||||
EncoderRate.encoderRateEnabled = 1;
|
||||
break;
|
||||
#endif
|
||||
#if HAS_HEATED_BED
|
||||
case 2: // set bed temperature
|
||||
checkkey = BedTemp;
|
||||
HMI_ValueStruct.Bed_Temp = HMI_ValueStruct.preheat_bed_temp[0];
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(2), HMI_ValueStruct.preheat_bed_temp[0]);
|
||||
HMI_ValueStruct.Bed_Temp = ui.material_preset[0].bed_temp;
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(2), ui.material_preset[0].bed_temp);
|
||||
EncoderRate.encoderRateEnabled = 1;
|
||||
break;
|
||||
#endif
|
||||
#if HAS_FAN
|
||||
case 3: // set fan speed
|
||||
checkkey = FanSpeed;
|
||||
HMI_ValueStruct.Fan_speed = HMI_ValueStruct.preheat_fan_speed[0];
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(3), HMI_ValueStruct.preheat_fan_speed[0]);
|
||||
HMI_ValueStruct.Fan_speed = ui.material_preset[0].fan_speed;
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(3), ui.material_preset[0].fan_speed);
|
||||
EncoderRate.encoderRateEnabled = 1;
|
||||
break;
|
||||
#endif
|
||||
case 4: // save PLA configuration
|
||||
if (settings.save()) {
|
||||
buzzer.tone(100, 659);
|
||||
@ -2885,8 +2932,7 @@ void HMI_PLAPreheatSetting(void) {
|
||||
}
|
||||
else buzzer.tone(20, 440);
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
default: break;
|
||||
}
|
||||
}
|
||||
DWIN_UpdateLCD();
|
||||
@ -2912,24 +2958,30 @@ void HMI_ABSPreheatSetting(void) {
|
||||
HMI_ValueStruct.show_mode = -1;
|
||||
Draw_Temperature_Menu();
|
||||
break;
|
||||
#if HAS_HOTEND
|
||||
case 1: // set nozzle temperature
|
||||
checkkey = ETemp;
|
||||
HMI_ValueStruct.E_Temp = HMI_ValueStruct.preheat_hotend_temp[1];
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(1), HMI_ValueStruct.preheat_hotend_temp[1]);
|
||||
HMI_ValueStruct.E_Temp = ui.material_preset[1].hotend_temp;
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(1), ui.material_preset[1].hotend_temp);
|
||||
EncoderRate.encoderRateEnabled = 1;
|
||||
break;
|
||||
#endif
|
||||
#if HAS_HEATED_BED
|
||||
case 2: // set bed temperature
|
||||
checkkey = BedTemp;
|
||||
HMI_ValueStruct.Bed_Temp = HMI_ValueStruct.preheat_bed_temp[1];
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(2), HMI_ValueStruct.preheat_bed_temp[1]);
|
||||
HMI_ValueStruct.Bed_Temp = ui.material_preset[1].bed_temp;
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(2), ui.material_preset[1].bed_temp);
|
||||
EncoderRate.encoderRateEnabled = 1;
|
||||
break;
|
||||
#endif
|
||||
#if HAS_FAN
|
||||
case 3: // set fan speed
|
||||
checkkey = FanSpeed;
|
||||
HMI_ValueStruct.Fan_speed = HMI_ValueStruct.preheat_fan_speed[1];
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(3), HMI_ValueStruct.preheat_fan_speed[1]);
|
||||
HMI_ValueStruct.Fan_speed = ui.material_preset[1].fan_speed;
|
||||
DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(3), ui.material_preset[1].fan_speed);
|
||||
EncoderRate.encoderRateEnabled = 1;
|
||||
break;
|
||||
#endif
|
||||
case 4: // save PLA configuration
|
||||
if (settings.save()) {
|
||||
buzzer.tone(100, 659);
|
||||
@ -3257,7 +3309,7 @@ void EachMomentUpdate(void) {
|
||||
/* remain print time */
|
||||
static millis_t next_remain_time_update = 0;
|
||||
if (elapsed.minute() > 5 && ELAPSED(ms, next_remain_time_update) && HMI_flag.heat_flag == 0) { // show after 5 min and 20s update
|
||||
remain_time = ((elapsed.value - heat_time) * ((float)card.getFileSize() / (float)card.getIndex())) - (elapsed.value - heat_time);
|
||||
remain_time = ((elapsed.value - dwin_heat_time) * ((float)card.getFileSize() / (float)card.getIndex())) - (elapsed.value - dwin_heat_time);
|
||||
next_remain_time_update += 20 * 1000UL;
|
||||
Draw_Print_ProgressRemain();
|
||||
}
|
||||
@ -3365,9 +3417,15 @@ void DWIN_HandleScreen(void) {
|
||||
case Move_Z: HMI_Move_Z(); break;
|
||||
case Extruder: HMI_Move_E(); break;
|
||||
case Homeoffset: HMI_Zoffset(); break;
|
||||
#if HAS_HOTEND
|
||||
case ETemp: HMI_ETemp(); break;
|
||||
#endif
|
||||
#if HAS_HEATED_BED
|
||||
case BedTemp: HMI_BedTemp(); break;
|
||||
#endif
|
||||
#if HAS_FAN
|
||||
case FanSpeed: HMI_FanSpeed(); break;
|
||||
#endif
|
||||
case PrintSpeed: HMI_PrintSpeed(); break;
|
||||
case MaxSpeed_value: HMI_MaxFeedspeedXYZE(); break;
|
||||
case MaxAcceleration_value: HMI_MaxAccelerationXYZE(); break;
|
||||
|
@ -81,8 +81,10 @@ enum processID {
|
||||
Motion,
|
||||
Info,
|
||||
Tune,
|
||||
#if HAS_HOTEND
|
||||
PLAPreheat,
|
||||
ABSPreheat,
|
||||
#endif
|
||||
MaxSpeed,
|
||||
MaxSpeed_value,
|
||||
MaxAcceleration,
|
||||
@ -105,9 +107,15 @@ enum processID {
|
||||
Move_Z,
|
||||
Extruder,
|
||||
Homeoffset,
|
||||
#if HAS_HOTEND
|
||||
ETemp,
|
||||
#endif
|
||||
#if HAS_HEATED_BED
|
||||
BedTemp,
|
||||
#endif
|
||||
#if HAS_FAN
|
||||
FanSpeed,
|
||||
#endif
|
||||
PrintSpeed,
|
||||
|
||||
/*Window ID*/
|
||||
@ -251,12 +259,18 @@ extern int checkkey, last_checkkey;
|
||||
extern float zprobe_zoffset;
|
||||
extern char print_filename[16];
|
||||
|
||||
extern millis_t heat_time;
|
||||
extern millis_t dwin_heat_time;
|
||||
|
||||
typedef struct {
|
||||
#if HAS_HOTEND
|
||||
int16_t E_Temp = 0;
|
||||
#endif
|
||||
#if HAS_HEATED_BED
|
||||
int16_t Bed_Temp = 0;
|
||||
#endif
|
||||
#if HAS_FAN
|
||||
int16_t Fan_speed = 0;
|
||||
#endif
|
||||
int16_t print_speed = 100;
|
||||
float Max_Feedspeed = 0;
|
||||
float Max_Acceleration = 0;
|
||||
@ -265,12 +279,11 @@ typedef struct {
|
||||
float Move_X_scale = 0;
|
||||
float Move_Y_scale = 0;
|
||||
float Move_Z_scale = 0;
|
||||
#if EXTRUDERS
|
||||
float Move_E_scale = 0;
|
||||
#endif
|
||||
float offset_value = 0;
|
||||
char show_mode = 0; // -1: Temperature control 0: Printing temperature
|
||||
int16_t preheat_hotend_temp[2];
|
||||
int16_t preheat_bed_temp[2];
|
||||
uint8_t preheat_fan_speed[2];
|
||||
} HMI_value_t;
|
||||
|
||||
typedef struct {
|
||||
@ -281,9 +294,15 @@ typedef struct {
|
||||
bool select_flag:1;
|
||||
bool home_flag:1;
|
||||
bool heat_flag:1; // 0: heating done 1: during heating
|
||||
#if HAS_HOTEND
|
||||
bool ETempTooLow_flag:1;
|
||||
#endif
|
||||
#if HAS_LEVELING
|
||||
bool leveling_offset_flag:1;
|
||||
#endif
|
||||
#if HAS_FAN
|
||||
char feedspeed_flag;
|
||||
#endif
|
||||
char acc_flag;
|
||||
char corner_flag;
|
||||
char step_flag;
|
||||
@ -310,8 +329,11 @@ void ICON_Continue(bool show);
|
||||
void ICON_Stop(bool show);
|
||||
|
||||
/* Popup window tips */
|
||||
void Popup_Window_Temperature(const bool toohigh);
|
||||
void Popup_Window_ETempTooLow(void);
|
||||
#if HAS_HOTEND
|
||||
void Popup_Window_Temperature(const bool toohigh);
|
||||
void Popup_Window_ETempTooLow(void);
|
||||
#endif
|
||||
|
||||
void Popup_Window_Resume(void);
|
||||
void Popup_Window_Home(void);
|
||||
void Popup_Window_Leveling(void);
|
||||
@ -326,9 +348,16 @@ void HMI_Move_Z(void);
|
||||
void HMI_Move_E(void);
|
||||
|
||||
void HMI_Zoffset(void);
|
||||
void HMI_ETemp(void);
|
||||
void HMI_BedTemp(void);
|
||||
void HMI_FanSpeed(void);
|
||||
|
||||
#if HAS_HOTEND
|
||||
void HMI_ETemp(void);
|
||||
#endif
|
||||
#if HAS_HEATED_BED
|
||||
void HMI_BedTemp(void);
|
||||
#endif
|
||||
#if HAS_FAN
|
||||
void HMI_FanSpeed(void);
|
||||
#endif
|
||||
void HMI_PrintSpeed(void);
|
||||
|
||||
void HMI_MaxFeedspeedXYZE(void);
|
||||
@ -363,8 +392,12 @@ void HMI_Temperature(void); // 温度菜单
|
||||
void HMI_Motion(void); // 运动菜单
|
||||
void HMI_Info(void); // 信息菜单
|
||||
void HMI_Tune(void); // 调整菜单
|
||||
void HMI_PLAPreheatSetting(void); // PLA预热设置
|
||||
void HMI_ABSPreheatSetting(void); // ABS预热设置
|
||||
|
||||
#if HAS_HOTEND
|
||||
void HMI_PLAPreheatSetting(void); // PLA预热设置
|
||||
void HMI_ABSPreheatSetting(void); // ABS预热设置
|
||||
#endif
|
||||
|
||||
void HMI_MaxSpeed(void); // 最大速度子菜单
|
||||
void HMI_MaxAcceleration(void); // 最大加速度子菜单
|
||||
void HMI_MaxCorner(void); // 最大拐角速度子菜单
|
||||
|
@ -298,7 +298,7 @@ void menu_advanced_settings();
|
||||
|
||||
#endif
|
||||
|
||||
#if DISABLED(SLIM_LCD_MENUS)
|
||||
#if PREHEAT_COUNT && DISABLED(SLIM_LCD_MENUS)
|
||||
|
||||
void _menu_configuration_preheat_settings(const uint8_t material) {
|
||||
#define _MINTEMP_ITEM(N) HEATER_##N##_MINTEMP,
|
||||
@ -307,12 +307,12 @@ void menu_advanced_settings();
|
||||
#define MAXTEMP_ALL _MAX(REPEAT(HOTENDS, _MAXTEMP_ITEM) 0)
|
||||
START_MENU();
|
||||
BACK_ITEM(MSG_CONFIGURATION);
|
||||
EDIT_ITEM(percent, MSG_FAN_SPEED, &ui.preheat_fan_speed[material], 0, 255);
|
||||
EDIT_ITEM(percent, MSG_FAN_SPEED, &ui.material_preset[material].fan_speed, 0, 255);
|
||||
#if HAS_TEMP_HOTEND
|
||||
EDIT_ITEM(int3, MSG_NOZZLE, &ui.preheat_hotend_temp[material], MINTEMP_ALL, MAXTEMP_ALL - HOTEND_OVERSHOOT);
|
||||
EDIT_ITEM(int3, MSG_NOZZLE, &ui.material_preset[material].hotend_temp, MINTEMP_ALL, MAXTEMP_ALL - HOTEND_OVERSHOOT);
|
||||
#endif
|
||||
#if HAS_HEATED_BED
|
||||
EDIT_ITEM(int3, MSG_BED, &ui.preheat_bed_temp[material], BED_MINTEMP, BED_MAX_TARGET);
|
||||
EDIT_ITEM(int3, MSG_BED, &ui.material_preset[material].bed_temp, BED_MINTEMP, BED_MAX_TARGET);
|
||||
#endif
|
||||
#if ENABLED(EEPROM_SETTINGS)
|
||||
ACTION_ITEM(MSG_STORE_EEPROM, ui.store_settings);
|
||||
@ -322,6 +322,15 @@ void menu_advanced_settings();
|
||||
|
||||
void menu_preheat_material1_settings() { _menu_configuration_preheat_settings(0); }
|
||||
void menu_preheat_material2_settings() { _menu_configuration_preheat_settings(1); }
|
||||
#if PREHEAT_COUNT >= 3
|
||||
void menu_preheat_material3_settings() { _menu_configuration_preheat_settings(3); }
|
||||
#if PREHEAT_COUNT >= 4
|
||||
void menu_preheat_material4_settings() { _menu_configuration_preheat_settings(4); }
|
||||
#if PREHEAT_COUNT >= 5
|
||||
void menu_preheat_material5_settings() { _menu_configuration_preheat_settings(5); }
|
||||
#endif
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
@ -400,10 +409,19 @@ void menu_configuration() {
|
||||
EDIT_ITEM(bool, MSG_OUTAGE_RECOVERY, &recovery.enabled, recovery.changed);
|
||||
#endif
|
||||
|
||||
#if DISABLED(SLIM_LCD_MENUS)
|
||||
// Preheat configurations
|
||||
#if PREHEAT_COUNT && DISABLED(SLIM_LCD_MENUS)
|
||||
SUBMENU(MSG_PREHEAT_1_SETTINGS, menu_preheat_material1_settings);
|
||||
SUBMENU(MSG_PREHEAT_2_SETTINGS, menu_preheat_material2_settings);
|
||||
#if PREHEAT_COUNT >= 3
|
||||
SUBMENU(MSG_PREHEAT_3_SETTINGS, menu_preheat_material3_settings);
|
||||
#if PREHEAT_COUNT >= 4
|
||||
SUBMENU(MSG_PREHEAT_4_SETTINGS, menu_preheat_material4_settings);
|
||||
#if PREHEAT_COUNT >= 5
|
||||
SUBMENU(MSG_PREHEAT_5_SETTINGS, menu_preheat_material5_settings);
|
||||
#endif
|
||||
#endif
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if ENABLED(EEPROM_SETTINGS)
|
||||
|
@ -81,8 +81,8 @@ void _menu_temp_filament_op(const PauseMode mode, const int8_t extruder) {
|
||||
START_MENU();
|
||||
if (LCD_HEIGHT >= 4) STATIC_ITEM_P(change_filament_header(mode), SS_CENTER|SS_INVERT);
|
||||
BACK_ITEM(MSG_BACK);
|
||||
ACTION_ITEM(MSG_PREHEAT_1, []{ _change_filament(ui.preheat_hotend_temp[0]); });
|
||||
ACTION_ITEM(MSG_PREHEAT_2, []{ _change_filament(ui.preheat_hotend_temp[1]); });
|
||||
ACTION_ITEM(MSG_PREHEAT_1, []{ _change_filament(ui.material_preset[0].hotend_temp); });
|
||||
ACTION_ITEM(MSG_PREHEAT_2, []{ _change_filament(ui.material_preset[1].hotend_temp); });
|
||||
EDIT_ITEM_FAST(int3, MSG_PREHEAT_CUSTOM, &thermalManager.temp_hotend[_change_filament_extruder].target, EXTRUDE_MINTEMP, thermalManager.heater_maxtemp[extruder] - HOTEND_OVERSHOOT, []{
|
||||
_change_filament(thermalManager.temp_hotend[_change_filament_extruder].target);
|
||||
});
|
||||
|
@ -243,7 +243,7 @@ void menu_info_board() {
|
||||
STATIC_ITEM_P(PSTR(MACHINE_NAME)); // My3DPrinter
|
||||
STATIC_ITEM_P(PSTR(WEBSITE_URL)); // www.my3dprinter.com
|
||||
VALUE_ITEM_P(MSG_INFO_EXTRUDERS, STRINGIFY(EXTRUDERS), SS_CENTER); // Extruders: 2
|
||||
#if HAS_BED_LEVELING
|
||||
#if HAS_LEVELING
|
||||
STATIC_ITEM(
|
||||
TERN_(AUTO_BED_LEVELING_3POINT, MSG_3POINT_LEVELING) // 3-Point Leveling
|
||||
TERN_(AUTO_BED_LEVELING_LINEAR, MSG_LINEAR_LEVELING) // Linear Leveling
|
||||
|
@ -157,7 +157,9 @@ void menu_main() {
|
||||
SUBMENU(MSG_CUTTER(MENU), menu_spindle_laser);
|
||||
#endif
|
||||
|
||||
#if HAS_TEMPERATURE
|
||||
SUBMENU(MSG_TEMPERATURE, menu_temperature);
|
||||
#endif
|
||||
|
||||
#if HAS_POWER_MONITOR
|
||||
MENU_ITEM(submenu, MSG_POWER_MONITOR, menu_power_monitor);
|
||||
|
@ -24,9 +24,9 @@
|
||||
// Temperature Menu
|
||||
//
|
||||
|
||||
#include "../../inc/MarlinConfigPre.h"
|
||||
#include "../../inc/MarlinConfig.h"
|
||||
|
||||
#if HAS_LCD_MENU
|
||||
#if HAS_LCD_MENU && HAS_TEMPERATURE
|
||||
|
||||
#include "menu.h"
|
||||
#include "../../module/temperature.h"
|
||||
@ -39,23 +39,19 @@
|
||||
#include "../../module/tool_change.h"
|
||||
#endif
|
||||
|
||||
// Initialized by settings.load()
|
||||
int16_t MarlinUI::preheat_hotend_temp[2], MarlinUI::preheat_bed_temp[2];
|
||||
uint8_t MarlinUI::preheat_fan_speed[2];
|
||||
|
||||
//
|
||||
// "Temperature" submenu items
|
||||
//
|
||||
|
||||
void Temperature::lcd_preheat(const int16_t e, const int8_t indh, const int8_t indb) {
|
||||
#if HAS_HOTEND
|
||||
if (indh >= 0 && ui.preheat_hotend_temp[indh] > 0)
|
||||
setTargetHotend(_MIN(thermalManager.heater_maxtemp[e] - HOTEND_OVERSHOOT, ui.preheat_hotend_temp[indh]), e);
|
||||
if (indh >= 0 && ui.material_preset[indh].hotend_temp > 0)
|
||||
setTargetHotend(_MIN(thermalManager.heater_maxtemp[e] - HOTEND_OVERSHOOT, ui.material_preset[indh].hotend_temp), e);
|
||||
#else
|
||||
UNUSED(e); UNUSED(indh);
|
||||
#endif
|
||||
#if HAS_HEATED_BED
|
||||
if (indb >= 0 && ui.preheat_bed_temp[indb] > 0) setTargetBed(ui.preheat_bed_temp[indb]);
|
||||
if (indb >= 0 && ui.material_preset[indb].bed_temp > 0) setTargetBed(ui.material_preset[indb].bed_temp);
|
||||
#else
|
||||
UNUSED(indb);
|
||||
#endif
|
||||
@ -64,7 +60,7 @@ void Temperature::lcd_preheat(const int16_t e, const int8_t indh, const int8_t i
|
||||
#if FAN_COUNT > 1
|
||||
active_extruder < FAN_COUNT ? active_extruder :
|
||||
#endif
|
||||
0), ui.preheat_fan_speed[indh]
|
||||
0), ui.material_preset[indh].fan_speed
|
||||
);
|
||||
#endif
|
||||
ui.return_to_status();
|
||||
@ -82,68 +78,66 @@ void Temperature::lcd_preheat(const int16_t e, const int8_t indh, const int8_t i
|
||||
|
||||
#if HAS_TEMP_HOTEND || HAS_HEATED_BED
|
||||
|
||||
#define _PREHEAT_ITEMS(M,N) do{ \
|
||||
ACTION_ITEM_N(N, MSG_PREHEAT_##M##_H, []{ _preheat_both(M-1, MenuItemBase::itemIndex); }); \
|
||||
ACTION_ITEM_N(N, MSG_PREHEAT_##M##_END_E, []{ _preheat_end(M-1, MenuItemBase::itemIndex); }); \
|
||||
#if HAS_TEMP_HOTEND && HAS_HEATED_BED
|
||||
#define _PREHEAT_ITEMS(M,E) do{ \
|
||||
ACTION_ITEM_N_P(E, msg_preheat_h[M], []{ _preheat_both(M, MenuItemBase::itemIndex); }); \
|
||||
ACTION_ITEM_N_P(E, msg_preheat_end_e[M], []{ _preheat_end(M, MenuItemBase::itemIndex); }); \
|
||||
}while(0)
|
||||
#if HAS_HEATED_BED
|
||||
#define PREHEAT_ITEMS(M,N) _PREHEAT_ITEMS(M,N)
|
||||
#define PREHEAT_ITEMS(M,E) _PREHEAT_ITEMS(M,E)
|
||||
#endif
|
||||
#else
|
||||
#define PREHEAT_ITEMS(M,N) \
|
||||
ACTION_ITEM_N(N, MSG_PREHEAT_##M##_H, []{ _preheat_end(M-1, MenuItemBase::itemIndex); })
|
||||
#define PREHEAT_ITEMS(M,E) ACTION_ITEM_N(E, msg_preheat_h[M], []{ _preheat_end(M, MenuItemBase::itemIndex); })
|
||||
#endif
|
||||
|
||||
void menu_preheat_m1() {
|
||||
void menu_preheat_m(const uint8_t m) {
|
||||
editable.int8 = m;
|
||||
#if HOTENDS == 1
|
||||
PGM_P msg_preheat[] = ARRAY_N(PREHEAT_COUNT, GET_TEXT(MSG_PREHEAT_1), GET_TEXT(MSG_PREHEAT_2), GET_TEXT(MSG_PREHEAT_3), GET_TEXT(MSG_PREHEAT_4), GET_TEXT(MSG_PREHEAT_5));
|
||||
PGM_P msg_preheat_end[] = ARRAY_N(PREHEAT_COUNT, GET_TEXT(MSG_PREHEAT_1_END), GET_TEXT(MSG_PREHEAT_2_END), GET_TEXT(MSG_PREHEAT_3_END), GET_TEXT(MSG_PREHEAT_4_END), GET_TEXT(MSG_PREHEAT_5_END));
|
||||
#elif HAS_MULTI_HOTEND
|
||||
PGM_P msg_preheat_all[] = ARRAY_N(PREHEAT_COUNT, GET_TEXT(MSG_PREHEAT_1_ALL), GET_TEXT(MSG_PREHEAT_2_ALL), GET_TEXT(MSG_PREHEAT_3_ALL), GET_TEXT(MSG_PREHEAT_4_ALL), GET_TEXT(MSG_PREHEAT_5_ALL));
|
||||
#endif
|
||||
PGM_P msg_preheat_end_e[] = ARRAY_N(PREHEAT_COUNT, GET_TEXT(MSG_PREHEAT_1_END_E), GET_TEXT(MSG_PREHEAT_2_END_E), GET_TEXT(MSG_PREHEAT_3_END_E), GET_TEXT(MSG_PREHEAT_4_END_E), GET_TEXT(MSG_PREHEAT_5_END_E));
|
||||
PGM_P msg_preheat_bed[] = ARRAY_N(PREHEAT_COUNT, GET_TEXT(MSG_PREHEAT_1_BEDONLY), GET_TEXT(MSG_PREHEAT_2_BEDONLY), GET_TEXT(MSG_PREHEAT_3_BEDONLY), GET_TEXT(MSG_PREHEAT_4_BEDONLY), GET_TEXT(MSG_PREHEAT_5_BEDONLY));
|
||||
PGM_P msg_preheat_h[] = ARRAY_N(PREHEAT_COUNT, GET_TEXT(MSG_PREHEAT_1_H), GET_TEXT(MSG_PREHEAT_2_H), GET_TEXT(MSG_PREHEAT_3_H), GET_TEXT(MSG_PREHEAT_4_H), GET_TEXT(MSG_PREHEAT_5_H));
|
||||
|
||||
START_MENU();
|
||||
BACK_ITEM(MSG_TEMPERATURE);
|
||||
#if HOTENDS == 1
|
||||
#if HAS_HEATED_BED
|
||||
ACTION_ITEM(MSG_PREHEAT_1, []{ _preheat_both(0, 0); });
|
||||
ACTION_ITEM(MSG_PREHEAT_1_END, []{ _preheat_end(0, 0); });
|
||||
ACTION_ITEM_P(msg_preheat[m], []{ _preheat_both(editable.int8, 0); });
|
||||
ACTION_ITEM_P(msg_preheat_end[m], []{ _preheat_end(editable.int8, 0); });
|
||||
#else
|
||||
ACTION_ITEM(MSG_PREHEAT_1, []{ _preheat_end(0, 0); });
|
||||
ACTION_ITEM_P(msg_preheat[m], []{ _preheat_end(editable.int8, 0); });
|
||||
#endif
|
||||
#elif HAS_MULTI_HOTEND
|
||||
#if HAS_HEATED_BED
|
||||
_PREHEAT_ITEMS(1,0);
|
||||
_PREHEAT_ITEMS(editable.int8,0);
|
||||
#endif
|
||||
LOOP_S_L_N(n, 1, HOTENDS) PREHEAT_ITEMS(1,n);
|
||||
ACTION_ITEM(MSG_PREHEAT_1_ALL, []() {
|
||||
TERN_(HAS_HEATED_BED, _preheat_bed(0));
|
||||
HOTEND_LOOP() thermalManager.setTargetHotend(ui.preheat_hotend_temp[0], e);
|
||||
LOOP_S_L_N(n, 1, HOTENDS) PREHEAT_ITEMS(editable.int8,n);
|
||||
ACTION_ITEM_P(msg_preheat_all[m], []() {
|
||||
TERN_(HAS_HEATED_BED, _preheat_bed(editable.int8));
|
||||
HOTEND_LOOP() thermalManager.setTargetHotend(ui.material_preset[editable.int8].hotend_temp, e);
|
||||
});
|
||||
#endif // HAS_MULTI_HOTEND
|
||||
#if HAS_HEATED_BED
|
||||
ACTION_ITEM(MSG_PREHEAT_1_BEDONLY, []{ _preheat_bed(0); });
|
||||
ACTION_ITEM_P(msg_preheat_bed[m], []{ _preheat_bed(editable.int8); });
|
||||
#endif
|
||||
END_MENU();
|
||||
}
|
||||
|
||||
void menu_preheat_m2() {
|
||||
START_MENU();
|
||||
BACK_ITEM(MSG_TEMPERATURE);
|
||||
#if HOTENDS == 1
|
||||
#if HAS_HEATED_BED
|
||||
ACTION_ITEM(MSG_PREHEAT_2, []{ _preheat_both(1, 0); });
|
||||
ACTION_ITEM(MSG_PREHEAT_2_END, []{ _preheat_end(1, 0); });
|
||||
#else
|
||||
ACTION_ITEM(MSG_PREHEAT_2, []{ _preheat_end(1, 0); });
|
||||
void menu_preheat_m1() { menu_preheat_m(0); }
|
||||
void menu_preheat_m2() { menu_preheat_m(1); }
|
||||
#if PREHEAT_COUNT >= 3
|
||||
void menu_preheat_m3() { menu_preheat_m(2); }
|
||||
#if PREHEAT_COUNT >= 4
|
||||
void menu_preheat_m4() { menu_preheat_m(3); }
|
||||
#if PREHEAT_COUNT >= 5
|
||||
void menu_preheat_m5() { menu_preheat_m(4); }
|
||||
#endif
|
||||
#elif HAS_MULTI_HOTEND
|
||||
#if HAS_HEATED_BED
|
||||
_PREHEAT_ITEMS(2,0);
|
||||
#endif
|
||||
LOOP_S_L_N(n, 1, HOTENDS) PREHEAT_ITEMS(2,n);
|
||||
ACTION_ITEM(MSG_PREHEAT_2_ALL, []() {
|
||||
TERN_(HAS_HEATED_BED, _preheat_bed(1));
|
||||
HOTEND_LOOP() thermalManager.setTargetHotend(ui.preheat_hotend_temp[1], e);
|
||||
});
|
||||
#endif // HAS_MULTI_HOTEND
|
||||
#if HAS_HEATED_BED
|
||||
ACTION_ITEM(MSG_PREHEAT_2_BEDONLY, []{ _preheat_bed(1); });
|
||||
#endif
|
||||
END_MENU();
|
||||
}
|
||||
|
||||
void lcd_cooldown() {
|
||||
thermalManager.zero_fan_speeds();
|
||||
@ -269,12 +263,30 @@ void menu_temperature() {
|
||||
//
|
||||
// Preheat for Material 1 and 2
|
||||
//
|
||||
#if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_3 != 0 || TEMP_SENSOR_4 != 0 || TEMP_SENSOR_5 != 0 || TEMP_SENSOR_6 != 0 || TEMP_SENSOR_7 != 0 || HAS_HEATED_BED
|
||||
#if HOTENDS > 1 || HAS_HEATED_BED
|
||||
SUBMENU(MSG_PREHEAT_1, menu_preheat_m1);
|
||||
SUBMENU(MSG_PREHEAT_2, menu_preheat_m2);
|
||||
#if PREHEAT_COUNT >= 3
|
||||
SUBMENU(MSG_PREHEAT_3, menu_preheat_m3);
|
||||
#if PREHEAT_COUNT >= 4
|
||||
SUBMENU(MSG_PREHEAT_4, menu_preheat_m4);
|
||||
#if PREHEAT_COUNT >= 5
|
||||
SUBMENU(MSG_PREHEAT_5, menu_preheat_m5);
|
||||
#endif
|
||||
#endif
|
||||
#endif
|
||||
#else
|
||||
ACTION_ITEM(MSG_PREHEAT_1, []{ _preheat_end(0, 0); });
|
||||
ACTION_ITEM(MSG_PREHEAT_2, []{ _preheat_end(1, 0); });
|
||||
#if PREHEAT_COUNT >= 3
|
||||
ACTION_ITEM(MSG_PREHEAT_3, []{ _preheat_end(2, 0); });
|
||||
#if PREHEAT_COUNT >= 3
|
||||
ACTION_ITEM(MSG_PREHEAT_4, []{ _preheat_end(3, 0); });
|
||||
#if PREHEAT_COUNT >= 3
|
||||
ACTION_ITEM(MSG_PREHEAT_5, []{ _preheat_end(4, 0); });
|
||||
#endif
|
||||
#endif
|
||||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
@ -288,4 +300,4 @@ void menu_temperature() {
|
||||
END_MENU();
|
||||
}
|
||||
|
||||
#endif // HAS_LCD_MENU
|
||||
#endif // HAS_LCD_MENU && HAS_TEMPERATURE
|
||||
|
@ -128,7 +128,9 @@ void _lcd_ubl_build_custom_mesh() {
|
||||
void _lcd_ubl_custom_mesh() {
|
||||
START_MENU();
|
||||
BACK_ITEM(MSG_UBL_BUILD_MESH_MENU);
|
||||
#if HAS_HOTEND
|
||||
EDIT_ITEM(int3, MSG_UBL_HOTEND_TEMP_CUSTOM, &custom_hotend_temp, EXTRUDE_MINTEMP, HEATER_0_MAXTEMP - HOTEND_OVERSHOOT);
|
||||
#endif
|
||||
#if HAS_HEATED_BED
|
||||
EDIT_ITEM(int3, MSG_UBL_BED_TEMP_CUSTOM, &custom_bed_temp, BED_MINTEMP, BED_MAX_TARGET);
|
||||
#endif
|
||||
@ -182,17 +184,24 @@ void _lcd_ubl_edit_mesh() {
|
||||
END_MENU();
|
||||
}
|
||||
|
||||
/**
|
||||
#if ENABLED(G26_MESH_VALIDATION)
|
||||
|
||||
/**
|
||||
* UBL Validate Custom Mesh Command
|
||||
*/
|
||||
void _lcd_ubl_validate_custom_mesh() {
|
||||
void _lcd_ubl_validate_custom_mesh() {
|
||||
char ubl_lcd_gcode[24];
|
||||
const int16_t temp = TERN(HAS_HEATED_BED, custom_bed_temp, 0);
|
||||
sprintf_P(ubl_lcd_gcode, PSTR("G28\nG26 C B%" PRIi16 " H%" PRIi16 " P"), temp, custom_hotend_temp);
|
||||
sprintf_P(ubl_lcd_gcode, PSTR("G28\nG26 C P H%" PRIi16 TERN_(HAS_HEATED_BED, " B%" PRIi16))
|
||||
, custom_hotend_temp
|
||||
#if HAS_HEATED_BED
|
||||
, temp
|
||||
#endif
|
||||
);
|
||||
queue.inject(ubl_lcd_gcode);
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
/**
|
||||
* UBL Validate Mesh submenu
|
||||
*
|
||||
* << UBL Tools
|
||||
@ -201,7 +210,7 @@ void _lcd_ubl_validate_custom_mesh() {
|
||||
* Validate Custom Mesh
|
||||
* << Info Screen
|
||||
*/
|
||||
void _lcd_ubl_validate_mesh() {
|
||||
void _lcd_ubl_validate_mesh() {
|
||||
START_MENU();
|
||||
BACK_ITEM(MSG_UBL_TOOLS);
|
||||
#if HAS_HEATED_BED
|
||||
@ -214,7 +223,9 @@ void _lcd_ubl_validate_mesh() {
|
||||
ACTION_ITEM(MSG_UBL_VALIDATE_CUSTOM_MESH, _lcd_ubl_validate_custom_mesh);
|
||||
ACTION_ITEM(MSG_INFO_SCREEN, ui.return_to_status);
|
||||
END_MENU();
|
||||
}
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
/**
|
||||
* UBL Grid Leveling submenu
|
||||
@ -530,13 +541,17 @@ void _menu_ubl_tools() {
|
||||
BACK_ITEM(MSG_UBL_LEVEL_BED);
|
||||
SUBMENU(MSG_UBL_BUILD_MESH_MENU, _lcd_ubl_build_mesh);
|
||||
GCODES_ITEM(MSG_UBL_MANUAL_MESH, PSTR("G29 I999\nG29 P2 B T0"));
|
||||
#if ENABLED(G26_MESH_VALIDATION)
|
||||
SUBMENU(MSG_UBL_VALIDATE_MESH_MENU, _lcd_ubl_validate_mesh);
|
||||
#endif
|
||||
SUBMENU(MSG_EDIT_MESH, _lcd_ubl_edit_mesh);
|
||||
SUBMENU(MSG_UBL_MESH_LEVELING, _lcd_ubl_mesh_leveling);
|
||||
END_MENU();
|
||||
}
|
||||
|
||||
/**
|
||||
#if ENABLED(G26_MESH_VALIDATION)
|
||||
|
||||
/**
|
||||
* UBL Step-By-Step submenu
|
||||
*
|
||||
* << Unified Bed Leveling
|
||||
@ -548,7 +563,7 @@ void _menu_ubl_tools() {
|
||||
* 6 Fine Tune All
|
||||
* 7 Save Bed Mesh
|
||||
*/
|
||||
void _lcd_ubl_step_by_step() {
|
||||
void _lcd_ubl_step_by_step() {
|
||||
START_MENU();
|
||||
BACK_ITEM(MSG_UBL_LEVEL_BED);
|
||||
GCODES_ITEM(MSG_UBL_1_BUILD_COLD_MESH, PSTR("G28\nG29 P1"));
|
||||
@ -559,7 +574,9 @@ void _lcd_ubl_step_by_step() {
|
||||
GCODES_ITEM(MSG_UBL_6_FINE_TUNE_ALL, PSTR("G29 P4 R999 T"));
|
||||
ACTION_ITEM(MSG_UBL_7_SAVE_MESH, _lcd_ubl_save_mesh_cmd);
|
||||
END_MENU();
|
||||
}
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
/**
|
||||
* UBL System submenu
|
||||
@ -574,7 +591,6 @@ void _lcd_ubl_step_by_step() {
|
||||
* - UBL Tools >>
|
||||
* - Output UBL Info >>
|
||||
*/
|
||||
|
||||
void _lcd_ubl_level_bed() {
|
||||
START_MENU();
|
||||
BACK_ITEM(MSG_MOTION);
|
||||
@ -582,7 +598,9 @@ void _lcd_ubl_level_bed() {
|
||||
GCODES_ITEM(MSG_UBL_DEACTIVATE_MESH, PSTR("G29 D"));
|
||||
else
|
||||
GCODES_ITEM(MSG_UBL_ACTIVATE_MESH, PSTR("G29 A"));
|
||||
#if ENABLED(G26_MESH_VALIDATION)
|
||||
SUBMENU(MSG_UBL_STEP_BY_STEP_MENU, _lcd_ubl_step_by_step);
|
||||
#endif
|
||||
ACTION_ITEM(MSG_UBL_MESH_EDIT, _lcd_ubl_output_map_lcd_cmd);
|
||||
SUBMENU(MSG_UBL_STORAGE_MESH_MENU, _lcd_ubl_storage_mesh);
|
||||
SUBMENU(MSG_UBL_OUTPUT_MAP, _lcd_ubl_output_map);
|
||||
|
@ -86,6 +86,10 @@ MarlinUI ui;
|
||||
}
|
||||
#endif
|
||||
|
||||
#if EITHER(HAS_LCD_MENU, DWIN_CREALITY_LCD)
|
||||
preheat_t MarlinUI::material_preset[PREHEAT_COUNT]; // Initialized by settings.load()
|
||||
#endif
|
||||
|
||||
#if HAS_SPI_LCD
|
||||
|
||||
#if HAS_GRAPHICAL_LCD
|
||||
|
@ -256,6 +256,14 @@
|
||||
};
|
||||
#endif
|
||||
|
||||
#if PREHEAT_COUNT
|
||||
typedef struct {
|
||||
TERN_(HAS_HOTEND, uint16_t hotend_temp);
|
||||
TERN_(HAS_HEATED_BED, uint16_t bed_temp );
|
||||
TERN_(HAS_FAN, uint16_t fan_speed );
|
||||
} preheat_t;
|
||||
#endif
|
||||
|
||||
////////////////////////////////////////////
|
||||
//////////// MarlinUI Singleton ////////////
|
||||
////////////////////////////////////////////
|
||||
@ -469,6 +477,10 @@ public:
|
||||
static const char * scrolled_filename(CardReader &theCard, const uint8_t maxlen, uint8_t hash, const bool doScroll);
|
||||
#endif
|
||||
|
||||
#if PREHEAT_COUNT
|
||||
static preheat_t material_preset[PREHEAT_COUNT];
|
||||
#endif
|
||||
|
||||
#if HAS_LCD_MENU
|
||||
|
||||
#if ENABLED(TOUCH_BUTTONS)
|
||||
@ -494,9 +506,6 @@ public:
|
||||
static constexpr int8_t manual_move_e_index = 0;
|
||||
#endif
|
||||
|
||||
static int16_t preheat_hotend_temp[2], preheat_bed_temp[2];
|
||||
static uint8_t preheat_fan_speed[2];
|
||||
|
||||
// Select Screen (modal NO/YES style dialog)
|
||||
static bool selection;
|
||||
static void set_selection(const bool sel) { selection = sel; }
|
||||
|
@ -37,7 +37,7 @@
|
||||
*/
|
||||
|
||||
// Change EEPROM version if the structure changes
|
||||
#define EEPROM_VERSION "V80"
|
||||
#define EEPROM_VERSION "V81"
|
||||
#define EEPROM_OFFSET 100
|
||||
|
||||
// Check the integrity of data offsets.
|
||||
@ -281,11 +281,11 @@ typedef struct SettingsDataStruct {
|
||||
#endif
|
||||
|
||||
//
|
||||
// ULTIPANEL
|
||||
// Material Presets
|
||||
//
|
||||
int16_t ui_preheat_hotend_temp[2], // M145 S0 H
|
||||
ui_preheat_bed_temp[2]; // M145 S0 B
|
||||
uint8_t ui_preheat_fan_speed[2]; // M145 S0 F
|
||||
#if PREHEAT_COUNT
|
||||
preheat_t ui_material_preset[PREHEAT_COUNT]; // M145 S0 H B F
|
||||
#endif
|
||||
|
||||
//
|
||||
// PIDTEMP
|
||||
@ -811,28 +811,11 @@ void MarlinSettings::postprocess() {
|
||||
//
|
||||
// LCD Preheat settings
|
||||
//
|
||||
{
|
||||
_FIELD_TEST(ui_preheat_hotend_temp);
|
||||
|
||||
#if HAS_HOTEND && HAS_LCD_MENU
|
||||
const int16_t (&ui_preheat_hotend_temp)[2] = ui.preheat_hotend_temp,
|
||||
(&ui_preheat_bed_temp)[2] = ui.preheat_bed_temp;
|
||||
const uint8_t (&ui_preheat_fan_speed)[2] = ui.preheat_fan_speed;
|
||||
#elif ENABLED(DWIN_CREALITY_LCD)
|
||||
const int16_t (&ui_preheat_hotend_temp)[2] = HMI_ValueStruct.preheat_hotend_temp,
|
||||
(&ui_preheat_bed_temp)[2] = HMI_ValueStruct.preheat_bed_temp;
|
||||
const uint8_t (&ui_preheat_fan_speed)[2] = HMI_ValueStruct.preheat_fan_speed;
|
||||
#else
|
||||
constexpr int16_t ui_preheat_hotend_temp[2] = { PREHEAT_1_TEMP_HOTEND, PREHEAT_2_TEMP_HOTEND },
|
||||
ui_preheat_bed_temp[2] = { PREHEAT_1_TEMP_BED, PREHEAT_2_TEMP_BED };
|
||||
constexpr uint8_t ui_preheat_fan_speed[2] = { PREHEAT_1_FAN_SPEED, PREHEAT_2_FAN_SPEED };
|
||||
#if PREHEAT_COUNT
|
||||
_FIELD_TEST(ui_material_preset);
|
||||
EEPROM_WRITE(ui.material_preset);
|
||||
#endif
|
||||
|
||||
EEPROM_WRITE(ui_preheat_hotend_temp);
|
||||
EEPROM_WRITE(ui_preheat_bed_temp);
|
||||
EEPROM_WRITE(ui_preheat_fan_speed);
|
||||
}
|
||||
|
||||
//
|
||||
// PIDTEMP
|
||||
//
|
||||
@ -1688,25 +1671,10 @@ void MarlinSettings::postprocess() {
|
||||
//
|
||||
// LCD Preheat settings
|
||||
//
|
||||
{
|
||||
_FIELD_TEST(ui_preheat_hotend_temp);
|
||||
|
||||
#if HAS_HOTEND && HAS_LCD_MENU
|
||||
int16_t (&ui_preheat_hotend_temp)[2] = ui.preheat_hotend_temp,
|
||||
(&ui_preheat_bed_temp)[2] = ui.preheat_bed_temp;
|
||||
uint8_t (&ui_preheat_fan_speed)[2] = ui.preheat_fan_speed;
|
||||
#elif ENABLED(DWIN_CREALITY_LCD)
|
||||
int16_t (&ui_preheat_hotend_temp)[2] = HMI_ValueStruct.preheat_hotend_temp,
|
||||
(&ui_preheat_bed_temp)[2] = HMI_ValueStruct.preheat_bed_temp;
|
||||
uint8_t (&ui_preheat_fan_speed)[2] = HMI_ValueStruct.preheat_fan_speed;
|
||||
#else
|
||||
int16_t ui_preheat_hotend_temp[2], ui_preheat_bed_temp[2];
|
||||
uint8_t ui_preheat_fan_speed[2];
|
||||
#if PREHEAT_COUNT
|
||||
_FIELD_TEST(ui_material_preset);
|
||||
EEPROM_READ(ui.material_preset);
|
||||
#endif
|
||||
EEPROM_READ(ui_preheat_hotend_temp); // 2 floats
|
||||
EEPROM_READ(ui_preheat_bed_temp); // 2 floats
|
||||
EEPROM_READ(ui_preheat_fan_speed); // 2 floats
|
||||
}
|
||||
|
||||
//
|
||||
// Hotend PID
|
||||
@ -2587,22 +2555,27 @@ void MarlinSettings::reset() {
|
||||
//
|
||||
// Preheat parameters
|
||||
//
|
||||
#if PREHEAT_COUNT
|
||||
#if HAS_HOTEND
|
||||
#if ENABLED(DWIN_CREALITY_LCD)
|
||||
HMI_ValueStruct.preheat_hotend_temp[0] = PREHEAT_1_TEMP_HOTEND;
|
||||
HMI_ValueStruct.preheat_hotend_temp[1] = PREHEAT_2_TEMP_HOTEND;
|
||||
HMI_ValueStruct.preheat_bed_temp[0] = PREHEAT_1_TEMP_BED;
|
||||
HMI_ValueStruct.preheat_bed_temp[1] = PREHEAT_2_TEMP_BED;
|
||||
HMI_ValueStruct.preheat_fan_speed[0] = PREHEAT_1_FAN_SPEED;
|
||||
HMI_ValueStruct.preheat_fan_speed[1] = PREHEAT_2_FAN_SPEED;
|
||||
#elif HAS_LCD_MENU
|
||||
ui.preheat_hotend_temp[0] = PREHEAT_1_TEMP_HOTEND;
|
||||
ui.preheat_hotend_temp[1] = PREHEAT_2_TEMP_HOTEND;
|
||||
ui.preheat_bed_temp[0] = PREHEAT_1_TEMP_BED;
|
||||
ui.preheat_bed_temp[1] = PREHEAT_2_TEMP_BED;
|
||||
ui.preheat_fan_speed[0] = PREHEAT_1_FAN_SPEED;
|
||||
ui.preheat_fan_speed[1] = PREHEAT_2_FAN_SPEED;
|
||||
constexpr uint16_t hpre[] = ARRAY_N(PREHEAT_COUNT, PREHEAT_1_TEMP_HOTEND, PREHEAT_2_TEMP_HOTEND, PREHEAT_3_TEMP_HOTEND, PREHEAT_4_TEMP_HOTEND, PREHEAT_5_TEMP_HOTEND);
|
||||
#endif
|
||||
#if HAS_HEATED_BED
|
||||
constexpr uint16_t bpre[] = ARRAY_N(PREHEAT_COUNT, PREHEAT_1_TEMP_BED, PREHEAT_2_TEMP_BED, PREHEAT_3_TEMP_BED, PREHEAT_4_TEMP_BED, PREHEAT_5_TEMP_BED);
|
||||
#endif
|
||||
#if HAS_FAN
|
||||
constexpr uint8_t fpre[] = ARRAY_N(PREHEAT_COUNT, PREHEAT_1_FAN_SPEED, PREHEAT_2_FAN_SPEED, PREHEAT_3_FAN_SPEED, PREHEAT_4_FAN_SPEED, PREHEAT_5_FAN_SPEED);
|
||||
#endif
|
||||
LOOP_L_N(i, PREHEAT_COUNT) {
|
||||
#if HAS_HOTEND
|
||||
ui.material_preset[i].hotend_temp = hpre[i];
|
||||
#endif
|
||||
#if HAS_HEATED_BED
|
||||
ui.material_preset[i].bed_temp = bpre[i];
|
||||
#endif
|
||||
#if HAS_FAN
|
||||
ui.material_preset[i].fan_speed = fpre[i];
|
||||
#endif
|
||||
}
|
||||
#endif
|
||||
|
||||
//
|
||||
@ -3131,16 +3104,22 @@ void MarlinSettings::reset() {
|
||||
|
||||
#endif // [XYZ]_DUAL_ENDSTOPS
|
||||
|
||||
#if HAS_HOTEND && HAS_LCD_MENU
|
||||
#if PREHEAT_COUNT
|
||||
|
||||
CONFIG_ECHO_HEADING("Material heatup parameters:");
|
||||
LOOP_L_N(i, COUNT(ui.preheat_hotend_temp)) {
|
||||
LOOP_L_N(i, PREHEAT_COUNT) {
|
||||
CONFIG_ECHO_START();
|
||||
SERIAL_ECHOLNPAIR(
|
||||
" M145 S", (int)i
|
||||
, " H", TEMP_UNIT(ui.preheat_hotend_temp[i])
|
||||
, " B", TEMP_UNIT(ui.preheat_bed_temp[i])
|
||||
, " F", int(ui.preheat_fan_speed[i])
|
||||
#if HAS_HOTEND
|
||||
, " H", TEMP_UNIT(ui.material_preset[i].hotend_temp)
|
||||
#endif
|
||||
#if HAS_HEATED_BED
|
||||
, " B", TEMP_UNIT(ui.material_preset[i].bed_temp)
|
||||
#endif
|
||||
#if HAS_FAN
|
||||
, " F", ui.material_preset[i].fan_speed
|
||||
#endif
|
||||
);
|
||||
}
|
||||
|
||||
|
@ -3128,7 +3128,7 @@ void Temperature::tick() {
|
||||
#if ENABLED(DWIN_CREALITY_LCD)
|
||||
HMI_flag.heat_flag = 0;
|
||||
duration_t elapsed = print_job_timer.duration(); // print timer
|
||||
heat_time = elapsed.value;
|
||||
dwin_heat_time = elapsed.value;
|
||||
#else
|
||||
ui.reset_status();
|
||||
#endif
|
||||
|
@ -797,7 +797,7 @@ class Temperature {
|
||||
|
||||
TERN_(HAS_DISPLAY, static void set_heating_message(const uint8_t e));
|
||||
|
||||
#if HAS_LCD_MENU
|
||||
#if HAS_LCD_MENU && HAS_TEMPERATURE
|
||||
static void lcd_preheat(const int16_t e, const int8_t indh, const int8_t indb);
|
||||
#endif
|
||||
|
||||
|
Loading…
Reference in New Issue
Block a user