bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Merge pull request #7100 from thinkyhead/bf_HAL_prepare

Browse Source 
Apply maths macros and type changes ahead of HAL
This commit is contained in:
Scott Lahteine 2017-06-20 01:15:23 -05:00 committed by GitHub
commit 424d0bae8b
27 changed files with 189 additions and 181 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

15
.travis.yml
View File

@ -300,12 +300,11 @@ script:
######## Example Configurations ############## ######## Example Configurations ##############
# #
# BQ Hephestos 2 # BQ Hephestos 2
- restore_configs #- restore_configs
- use_example_configs Hephestos_2 #- use_example_configs Hephestos_2
- build_marlin #- build_marlin
# #
# Delta Config (generic) + ABL bilinear + PROBE_MANUALLY # Delta Config (generic) + ABL bilinear + PROBE_MANUALLY
- restore_configs
- use_example_configs delta/generic - use_example_configs delta/generic
- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER DELTA_CALIBRATION_MENU AUTO_BED_LEVELING_BILINEAR PROBE_MANUALLY - opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER DELTA_CALIBRATION_MENU AUTO_BED_LEVELING_BILINEAR PROBE_MANUALLY
- build_marlin - build_marlin
@ -327,17 +326,11 @@ script:
#- use_example_configs makibox #- use_example_configs makibox
#- build_marlin #- build_marlin
# #
# SCARA Config # SCARA with TMC2130
# #
- use_example_configs SCARA - use_example_configs SCARA
- opt_enable AUTO_BED_LEVELING_BILINEAR FIX_MOUNTED_PROBE USE_ZMIN_PLUG EEPROM_SETTINGS EEPROM_CHITCHAT ULTIMAKERCONTROLLER - opt_enable AUTO_BED_LEVELING_BILINEAR FIX_MOUNTED_PROBE USE_ZMIN_PLUG EEPROM_SETTINGS EEPROM_CHITCHAT ULTIMAKERCONTROLLER
- build_marlin
#
# TMC2130 Config
#
- restore_configs
- opt_enable_adv HAVE_TMC2130 X_IS_TMC2130 Y_IS_TMC2130 Z_IS_TMC2130 - opt_enable_adv HAVE_TMC2130 X_IS_TMC2130 Y_IS_TMC2130 Z_IS_TMC2130
- build_marlin
- opt_enable_adv AUTOMATIC_CURRENT_CONTROL STEALTHCHOP HYBRID_THRESHOLD SENSORLESS_HOMING - opt_enable_adv AUTOMATIC_CURRENT_CONTROL STEALTHCHOP HYBRID_THRESHOLD SENSORLESS_HOMING
- build_marlin - build_marlin
# #

2
Marlin/G26_Mesh_Validation_Tool.cpp
View File

@ -600,7 +600,7 @@
// If the end point of the line is closer to the nozzle, flip the direction, // If the end point of the line is closer to the nozzle, flip the direction,
// moving from the end to the start. On very small lines the optimization isn't worth it. // moving from the end to the start. On very small lines the optimization isn't worth it.
if (dist_end < dist_start && (SIZE_OF_INTERSECTION_CIRCLES) < abs(line_length)) { if (dist_end < dist_start && (SIZE_OF_INTERSECTION_CIRCLES) < FABS(line_length)) {
return print_line_from_here_to_there(ex, ey, ez, sx, sy, sz); return print_line_from_here_to_there(ex, ey, ez, sx, sy, sz);
} }

41
Marlin/I2CPositionEncoder.cpp
View File

@ -126,16 +126,16 @@
} }
lastPosition = position; lastPosition = position;
unsigned long positionTime = millis(); millis_t positionTime = millis();
//only do error correction if setup and enabled //only do error correction if setup and enabled
if (ec && ecMethod != I2CPE_ECM_NONE) { if (ec && ecMethod != I2CPE_ECM_NONE) {
#if defined(I2CPE_EC_THRESH_PROPORTIONAL) #if defined(I2CPE_EC_THRESH_PROPORTIONAL)
millis_t deltaTime = positionTime - lastPositionTime;
unsigned long distance = abs(position - lastPosition); unsigned long distance = abs(position - lastPosition);
unsigned long deltaTime = positionTime - lastPositionTime;
unsigned long speed = distance / deltaTime; unsigned long speed = distance / deltaTime;
float threshold = constrain((speed / 50), 1, 50) * ecThreshold; float threshold = constrain(speed / 50, 1, 50) * ecThreshold;
#else #else
float threshold = get_error_correct_threshold(); float threshold = get_error_correct_threshold();
#endif #endif
@ -162,7 +162,7 @@
//SERIAL_ECHOLN(error); //SERIAL_ECHOLN(error);
#if defined(I2CPE_ERR_THRESH_ABORT) #if defined(I2CPE_ERR_THRESH_ABORT)
if (abs(error) > I2CPE_ERR_THRESH_ABORT * planner.axis_steps_per_mm[encoderAxis]) { if (labs(error) > I2CPE_ERR_THRESH_ABORT * planner.axis_steps_per_mm[encoderAxis]) {
//kill("Significant Error"); //kill("Significant Error");
SERIAL_ECHOPGM("Axis error greater than set threshold, aborting!"); SERIAL_ECHOPGM("Axis error greater than set threshold, aborting!");
SERIAL_ECHOLN(error); SERIAL_ECHOLN(error);
@ -174,29 +174,32 @@
if (errIdx == 0) { if (errIdx == 0) {
// in order to correct for "error" but avoid correcting for noise and non skips // in order to correct for "error" but avoid correcting for noise and non skips
// it must be > threshold and have a difference average of < 10 and be < 2000 steps // it must be > threshold and have a difference average of < 10 and be < 2000 steps
if (abs(error) > threshold * planner.axis_steps_per_mm[encoderAxis] && if (labs(error) > threshold * planner.axis_steps_per_mm[encoderAxis] &&
diffSum < 10*(I2CPE_ERR_ARRAY_SIZE-1) && abs(error) < 2000) { //Check for persistent error (skip) diffSum < 10 * (I2CPE_ERR_ARRAY_SIZE - 1) && labs(error) < 2000) { //Check for persistent error (skip)
SERIAL_ECHO(axis_codes[encoderAxis]); SERIAL_ECHO(axis_codes[encoderAxis]);
SERIAL_ECHOPAIR(" diffSum: ", diffSum/(I2CPE_ERR_ARRAY_SIZE-1)); SERIAL_ECHOPAIR(" diffSum: ", diffSum / (I2CPE_ERR_ARRAY_SIZE - 1));
SERIAL_ECHOPAIR(" - err detected: ", error / planner.axis_steps_per_mm[encoderAxis]); SERIAL_ECHOPAIR(" - err detected: ", error / planner.axis_steps_per_mm[encoderAxis]);
SERIAL_ECHOLNPGM("mm; correcting!"); SERIAL_ECHOLNPGM("mm; correcting!");
thermalManager.babystepsTodo[encoderAxis] = -lround(error); thermalManager.babystepsTodo[encoderAxis] = -LROUND(error);
} }
} }
#else #else
if (abs(error) > threshold * planner.axis_steps_per_mm[encoderAxis]) { if (labs(error) > threshold * planner.axis_steps_per_mm[encoderAxis]) {
//SERIAL_ECHOLN(error); //SERIAL_ECHOLN(error);
//SERIAL_ECHOLN(position); //SERIAL_ECHOLN(position);
thermalManager.babystepsTodo[encoderAxis] = -lround(error/2); thermalManager.babystepsTodo[encoderAxis] = -LROUND(error/2);
} }
#endif #endif
if (abs(error) > (I2CPE_ERR_CNT_THRESH * planner.axis_steps_per_mm[encoderAxis]) && millis() - lastErrorCountTime > I2CPE_ERR_CNT_DEBOUNCE_MS) { if (labs(error) > I2CPE_ERR_CNT_THRESH * planner.axis_steps_per_mm[encoderAxis]) {
SERIAL_ECHOPAIR("Large error on ", axis_codes[encoderAxis]); const millis_t ms = millis();
SERIAL_ECHOPAIR(" axis. error: ", (int)error); if (ELAPSED(ms, nextErrorCountTime)) {
SERIAL_ECHOLNPAIR("; diffSum: ", diffSum); SERIAL_ECHOPAIR("Large error on ", axis_codes[encoderAxis]);
errorCount++; SERIAL_ECHOPAIR(" axis. error: ", (int)error);
lastErrorCountTime = millis(); SERIAL_ECHOLNPAIR("; diffSum: ", diffSum);
errorCount++;
nextErrorCountTime = ms + I2CPE_ERR_CNT_DEBOUNCE_MS;
}
} }
} }
@ -255,7 +258,7 @@
actual = mm_from_count(position); actual = mm_from_count(position);
error = actual - target; error = actual - target;
if (abs(error) > 10000) error = 0; // ? if (labs(error) > 10000) error = 0; // ?
if (report) { if (report) {
SERIAL_ECHO(axis_codes[encoderAxis]); SERIAL_ECHO(axis_codes[encoderAxis]);
@ -284,13 +287,13 @@
stepperTicksPerUnit = (type == I2CPE_ENC_TYPE_ROTARY) ? stepperTicks : planner.axis_steps_per_mm[encoderAxis]; stepperTicksPerUnit = (type == I2CPE_ENC_TYPE_ROTARY) ? stepperTicks : planner.axis_steps_per_mm[encoderAxis];
//convert both 'ticks' into same units / base //convert both 'ticks' into same units / base
encoderCountInStepperTicksScaled = lround((stepperTicksPerUnit * encoderTicks) / encoderTicksPerUnit); encoderCountInStepperTicksScaled = LROUND((stepperTicksPerUnit * encoderTicks) / encoderTicksPerUnit);
long target = stepper.position(encoderAxis), long target = stepper.position(encoderAxis),
error = (encoderCountInStepperTicksScaled - target); error = (encoderCountInStepperTicksScaled - target);
//suppress discontinuities (might be caused by bad I2C readings...?) //suppress discontinuities (might be caused by bad I2C readings...?)
bool suppressOutput = (abs(error - errorPrev) > 100); bool suppressOutput = (labs(error - errorPrev) > 100);
if (report) { if (report) {
SERIAL_ECHO(axis_codes[encoderAxis]); SERIAL_ECHO(axis_codes[encoderAxis]);

2
Marlin/I2CPositionEncoder.h
View File

@ -136,7 +136,7 @@
position; position;
unsigned long lastPositionTime = 0, unsigned long lastPositionTime = 0,
lastErrorCountTime = 0, nextErrorCountTime = 0,
lastErrorTime; lastErrorTime;
//double positionMm; //calculate //double positionMm; //calculate

4
Marlin/Marlin.h
View File

@ -210,7 +210,7 @@ inline void refresh_cmd_timeout() { previous_cmd_ms = millis(); }
/** /**
* Feedrate scaling and conversion * Feedrate scaling and conversion
*/ */
extern int feedrate_percentage; extern int16_t feedrate_percentage;
#define MMM_TO_MMS(MM_M) ((MM_M)/60.0) #define MMM_TO_MMS(MM_M) ((MM_M)/60.0)
#define MMS_TO_MMM(MM_S) ((MM_S)*60.0) #define MMS_TO_MMM(MM_S) ((MM_S)*60.0)
@ -218,7 +218,7 @@ extern int feedrate_percentage;
extern bool axis_relative_modes[]; extern bool axis_relative_modes[];
extern bool volumetric_enabled; extern bool volumetric_enabled;
extern int flow_percentage[EXTRUDERS]; // Extrusion factor for each extruder extern int16_t flow_percentage[EXTRUDERS]; // Extrusion factor for each extruder
extern float filament_size[EXTRUDERS]; // cross-sectional area of filament (in millimeters), typically around 1.75 or 2.85, 0 disables the volumetric calculations for the extruder. extern float filament_size[EXTRUDERS]; // cross-sectional area of filament (in millimeters), typically around 1.75 or 2.85, 0 disables the volumetric calculations for the extruder.
extern float volumetric_multiplier[EXTRUDERS]; // reciprocal of cross-sectional area of filament (in square millimeters), stored this way to reduce computational burden in planner extern float volumetric_multiplier[EXTRUDERS]; // reciprocal of cross-sectional area of filament (in square millimeters), stored this way to reduce computational burden in planner
extern bool axis_known_position[XYZ]; extern bool axis_known_position[XYZ];

70
Marlin/Marlin_main.cpp
View File

@ -421,7 +421,7 @@ FORCE_INLINE float homing_feedrate(const AxisEnum a) { return pgm_read_float(&ho
float feedrate_mm_s = MMM_TO_MMS(1500.0); float feedrate_mm_s = MMM_TO_MMS(1500.0);
static float saved_feedrate_mm_s; static float saved_feedrate_mm_s;
int feedrate_percentage = 100, saved_feedrate_percentage, int16_t feedrate_percentage = 100, saved_feedrate_percentage,
flow_percentage[EXTRUDERS] = ARRAY_BY_EXTRUDERS1(100); flow_percentage[EXTRUDERS] = ARRAY_BY_EXTRUDERS1(100);
bool axis_relative_modes[] = AXIS_RELATIVE_MODES, bool axis_relative_modes[] = AXIS_RELATIVE_MODES,
@ -2278,7 +2278,7 @@ static void clean_up_after_endstop_or_probe_move() {
SERIAL_ECHOLNPAIR(" Discrepancy:", first_probe_z - current_position[Z_AXIS]); SERIAL_ECHOLNPAIR(" Discrepancy:", first_probe_z - current_position[Z_AXIS]);
} }
#endif #endif
return current_position[Z_AXIS] + zprobe_zoffset; return RAW_CURRENT_POSITION(Z) + zprobe_zoffset;
} }
/** /**
@ -2968,7 +2968,7 @@ static void homeaxis(const AxisEnum axis) {
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)
if (axis == Z_AXIS) { if (axis == Z_AXIS) {
float adj = fabs(z_endstop_adj); float adj = FABS(z_endstop_adj);
bool lockZ1; bool lockZ1;
if (axis_home_dir > 0) { if (axis_home_dir > 0) {
adj = -adj; adj = -adj;
@ -3293,7 +3293,7 @@ inline void gcode_G0_G1(
const float e = clockwise ^ (r < 0) ? -1 : 1, // clockwise -1/1, counterclockwise 1/-1 const float e = clockwise ^ (r < 0) ? -1 : 1, // clockwise -1/1, counterclockwise 1/-1
dx = x2 - x1, dy = y2 - y1, // X and Y differences dx = x2 - x1, dy = y2 - y1, // X and Y differences
d = HYPOT(dx, dy), // Linear distance between the points d = HYPOT(dx, dy), // Linear distance between the points
h = sqrt(sq(r) - sq(d * 0.5)), // Distance to the arc pivot-point h = SQRT(sq(r) - sq(d * 0.5)), // Distance to the arc pivot-point
mx = (x1 + x2) * 0.5, my = (y1 + y2) * 0.5, // Point between the two points mx = (x1 + x2) * 0.5, my = (y1 + y2) * 0.5, // Point between the two points
sx = -dy / d, sy = dx / d, // Slope of the perpendicular bisector sx = -dy / d, sy = dx / d, // Slope of the perpendicular bisector
cx = mx + e * h * sx, cy = my + e * h * sy; // Pivot-point of the arc cx = mx + e * h * sx, cy = my + e * h * sy; // Pivot-point of the arc
@ -3448,7 +3448,7 @@ inline void gcode_G4() {
const float mlx = max_length(X_AXIS), const float mlx = max_length(X_AXIS),
mly = max_length(Y_AXIS), mly = max_length(Y_AXIS),
mlratio = mlx > mly ? mly / mlx : mlx / mly, mlratio = mlx > mly ? mly / mlx : mlx / mly,
fr_mm_s = min(homing_feedrate(X_AXIS), homing_feedrate(Y_AXIS)) * sqrt(sq(mlratio) + 1.0); fr_mm_s = min(homing_feedrate(X_AXIS), homing_feedrate(Y_AXIS)) * SQRT(sq(mlratio) + 1.0);
do_blocking_move_to_xy(1.5 * mlx * x_axis_home_dir, 1.5 * mly * home_dir(Y_AXIS), fr_mm_s); do_blocking_move_to_xy(1.5 * mlx * x_axis_home_dir, 1.5 * mly * home_dir(Y_AXIS), fr_mm_s);
endstops.hit_on_purpose(); // clear endstop hit flags endstops.hit_on_purpose(); // clear endstop hit flags
@ -4183,7 +4183,7 @@ void home_all_axes() { gcode_G28(true); }
* W Write a mesh point. (Ignored during leveling.) * W Write a mesh point. (Ignored during leveling.)
* X Required X for mesh point * X Required X for mesh point
* Y Required Y for mesh point * Y Required Y for mesh point
* Z Required Z for mesh point * Z Z for mesh point. Otherwise, current Z minus Z probe offset.
* *
* Without PROBE_MANUALLY: * Without PROBE_MANUALLY:
* *
@ -4316,8 +4316,8 @@ void home_all_axes() { gcode_G28(true); }
return; return;
} }
const float z = parser.seen('Z') && parser.has_value() ? parser.value_float() : NAN; const float z = parser.seen('Z') && parser.has_value() ? parser.value_float() : RAW_CURRENT_POSITION(Z);
if (!isnan(z) || !WITHIN(z, -10, 10)) { if (!WITHIN(z, -10, 10)) {
SERIAL_ERROR_START(); SERIAL_ERROR_START();
SERIAL_ERRORLNPGM("Bad Z value"); SERIAL_ERRORLNPGM("Bad Z value");
return; return;
@ -4605,8 +4605,8 @@ void home_all_axes() { gcode_G28(true); }
const float xBase = xCount * xGridSpacing + left_probe_bed_position, const float xBase = xCount * xGridSpacing + left_probe_bed_position,
yBase = yCount * yGridSpacing + front_probe_bed_position; yBase = yCount * yGridSpacing + front_probe_bed_position;
xProbe = floor(xBase + (xBase < 0 ? 0 : 0.5)); xProbe = FLOOR(xBase + (xBase < 0 ? 0 : 0.5));
yProbe = floor(yBase + (yBase < 0 ? 0 : 0.5)); yProbe = FLOOR(yBase + (yBase < 0 ? 0 : 0.5));
#if ENABLED(AUTO_BED_LEVELING_LINEAR) #if ENABLED(AUTO_BED_LEVELING_LINEAR)
indexIntoAB[xCount][yCount] = abl_probe_index; indexIntoAB[xCount][yCount] = abl_probe_index;
@ -4710,8 +4710,8 @@ void home_all_axes() { gcode_G28(true); }
float xBase = left_probe_bed_position + xGridSpacing * xCount, float xBase = left_probe_bed_position + xGridSpacing * xCount,
yBase = front_probe_bed_position + yGridSpacing * yCount; yBase = front_probe_bed_position + yGridSpacing * yCount;
xProbe = floor(xBase + (xBase < 0 ? 0 : 0.5)); xProbe = FLOOR(xBase + (xBase < 0 ? 0 : 0.5));
yProbe = floor(yBase + (yBase < 0 ? 0 : 0.5)); yProbe = FLOOR(yBase + (yBase < 0 ? 0 : 0.5));
#if ENABLED(AUTO_BED_LEVELING_LINEAR) #if ENABLED(AUTO_BED_LEVELING_LINEAR)
indexIntoAB[xCount][yCount] = ++abl_probe_index; // 0... indexIntoAB[xCount][yCount] = ++abl_probe_index; // 0...
@ -5263,7 +5263,7 @@ void home_all_axes() { gcode_G28(true); }
N++; N++;
} }
zero_std_dev_old = zero_std_dev; zero_std_dev_old = zero_std_dev;
zero_std_dev = round(sqrt(S2 / N) * 1000.0) / 1000.0 + 0.00001; zero_std_dev = round(SQRT(S2 / N) * 1000.0) / 1000.0 + 0.00001;
if (iterations == 1) home_offset[Z_AXIS] = zh_old; // reset height after 1st probe change if (iterations == 1) home_offset[Z_AXIS] = zh_old; // reset height after 1st probe change
@ -5464,7 +5464,7 @@ void home_all_axes() { gcode_G28(true); }
float retract_mm[XYZ]; float retract_mm[XYZ];
LOOP_XYZ(i) { LOOP_XYZ(i) {
float dist = destination[i] - current_position[i]; float dist = destination[i] - current_position[i];
retract_mm[i] = fabs(dist) < G38_MINIMUM_MOVE ? 0 : home_bump_mm((AxisEnum)i) * (dist > 0 ? -1 : 1); retract_mm[i] = FABS(dist) < G38_MINIMUM_MOVE ? 0 : home_bump_mm((AxisEnum)i) * (dist > 0 ? -1 : 1);
} }
stepper.synchronize(); // wait until the machine is idle stepper.synchronize(); // wait until the machine is idle
@ -5528,7 +5528,7 @@ void home_all_axes() { gcode_G28(true); }
// If any axis has enough movement, do the move // If any axis has enough movement, do the move
LOOP_XYZ(i) LOOP_XYZ(i)
if (fabs(destination[i] - current_position[i]) >= G38_MINIMUM_MOVE) { if (FABS(destination[i] - current_position[i]) >= G38_MINIMUM_MOVE) {
if (!parser.seen('F')) feedrate_mm_s = homing_feedrate(i); if (!parser.seen('F')) feedrate_mm_s = homing_feedrate(i);
// If G38.2 fails throw an error // If G38.2 fails throw an error
if (!G38_run_probe() && is_38_2) { if (!G38_run_probe() && is_38_2) {
@ -6851,7 +6851,7 @@ inline void gcode_M42() {
for (uint8_t j = 0; j <= n; j++) for (uint8_t j = 0; j <= n; j++)
sum += sq(sample_set[j] - mean); sum += sq(sample_set[j] - mean);
sigma = sqrt(sum / (n + 1)); sigma = SQRT(sum / (n + 1));
if (verbose_level > 0) { if (verbose_level > 0) {
if (verbose_level > 1) { if (verbose_level > 1) {
SERIAL_PROTOCOL(n + 1); SERIAL_PROTOCOL(n + 1);
@ -7266,7 +7266,7 @@ inline void gcode_M109() {
#if TEMP_RESIDENCY_TIME > 0 #if TEMP_RESIDENCY_TIME > 0
const float temp_diff = fabs(target_temp - temp); const float temp_diff = FABS(target_temp - temp);
if (!residency_start_ms) { if (!residency_start_ms) {
// Start the TEMP_RESIDENCY_TIME timer when we reach target temp for the first time. // Start the TEMP_RESIDENCY_TIME timer when we reach target temp for the first time.
@ -7395,7 +7395,7 @@ inline void gcode_M109() {
#if TEMP_BED_RESIDENCY_TIME > 0 #if TEMP_BED_RESIDENCY_TIME > 0
const float temp_diff = fabs(target_temp - temp); const float temp_diff = FABS(target_temp - temp);
if (!residency_start_ms) { if (!residency_start_ms) {
// Start the TEMP_BED_RESIDENCY_TIME timer when we reach target temp for the first time. // Start the TEMP_BED_RESIDENCY_TIME timer when we reach target temp for the first time.
@ -9252,7 +9252,7 @@ inline void gcode_M503() {
#if ENABLED(BABYSTEP_ZPROBE_OFFSET) #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
if (!no_babystep && leveling_is_active()) if (!no_babystep && leveling_is_active())
thermalManager.babystep_axis(Z_AXIS, -lround(diff * planner.axis_steps_per_mm[Z_AXIS])); thermalManager.babystep_axis(Z_AXIS, -LROUND(diff * planner.axis_steps_per_mm[Z_AXIS]));
#else #else
UNUSED(no_babystep); UNUSED(no_babystep);
#endif #endif
@ -11171,7 +11171,7 @@ void ok_to_send() {
if (last_x != x) { if (last_x != x) {
last_x = x; last_x = x;
ratio_x = x * ABL_BG_FACTOR(X_AXIS); ratio_x = x * ABL_BG_FACTOR(X_AXIS);
const float gx = constrain(floor(ratio_x), 0, ABL_BG_POINTS_X - FAR_EDGE_OR_BOX); const float gx = constrain(FLOOR(ratio_x), 0, ABL_BG_POINTS_X - FAR_EDGE_OR_BOX);
ratio_x -= gx; // Subtract whole to get the ratio within the grid box ratio_x -= gx; // Subtract whole to get the ratio within the grid box
#if DISABLED(EXTRAPOLATE_BEYOND_GRID) #if DISABLED(EXTRAPOLATE_BEYOND_GRID)
@ -11188,7 +11188,7 @@ void ok_to_send() {
if (last_y != y) { if (last_y != y) {
last_y = y; last_y = y;
ratio_y = y * ABL_BG_FACTOR(Y_AXIS); ratio_y = y * ABL_BG_FACTOR(Y_AXIS);
const float gy = constrain(floor(ratio_y), 0, ABL_BG_POINTS_Y - FAR_EDGE_OR_BOX); const float gy = constrain(FLOOR(ratio_y), 0, ABL_BG_POINTS_Y - FAR_EDGE_OR_BOX);
ratio_y -= gy; ratio_y -= gy;
#if DISABLED(EXTRAPOLATE_BEYOND_GRID) #if DISABLED(EXTRAPOLATE_BEYOND_GRID)
@ -11221,7 +11221,7 @@ void ok_to_send() {
/* /*
static float last_offset = 0; static float last_offset = 0;
if (fabs(last_offset - offset) > 0.2) { if (FABS(last_offset - offset) > 0.2) {
SERIAL_ECHOPGM("Sudden Shift at "); SERIAL_ECHOPGM("Sudden Shift at ");
SERIAL_ECHOPAIR("x=", x); SERIAL_ECHOPAIR("x=", x);
SERIAL_ECHOPAIR(" / ", bilinear_grid_spacing[X_AXIS]); SERIAL_ECHOPAIR(" / ", bilinear_grid_spacing[X_AXIS]);
@ -11290,7 +11290,7 @@ void ok_to_send() {
#else #else
#define _SQRT(n) sqrt(n) #define _SQRT(n) SQRT(n)
#endif #endif
@ -11364,7 +11364,7 @@ void ok_to_send() {
float distance = delta[A_AXIS]; float distance = delta[A_AXIS];
cartesian[Y_AXIS] = LOGICAL_Y_POSITION(DELTA_PRINTABLE_RADIUS); cartesian[Y_AXIS] = LOGICAL_Y_POSITION(DELTA_PRINTABLE_RADIUS);
inverse_kinematics(cartesian); inverse_kinematics(cartesian);
return abs(distance - delta[A_AXIS]); return FABS(distance - delta[A_AXIS]);
} }
/** /**
@ -11397,7 +11397,7 @@ void ok_to_send() {
float p12[3] = { delta_tower[B_AXIS][X_AXIS] - delta_tower[A_AXIS][X_AXIS], delta_tower[B_AXIS][Y_AXIS] - delta_tower[A_AXIS][Y_AXIS], z2 - z1 }; float p12[3] = { delta_tower[B_AXIS][X_AXIS] - delta_tower[A_AXIS][X_AXIS], delta_tower[B_AXIS][Y_AXIS] - delta_tower[A_AXIS][Y_AXIS], z2 - z1 };
// Get the Magnitude of vector. // Get the Magnitude of vector.
float d = sqrt( sq(p12[0]) + sq(p12[1]) + sq(p12[2]) ); float d = SQRT( sq(p12[0]) + sq(p12[1]) + sq(p12[2]) );
// Create unit vector by dividing by magnitude. // Create unit vector by dividing by magnitude.
float ex[3] = { p12[0] / d, p12[1] / d, p12[2] / d }; float ex[3] = { p12[0] / d, p12[1] / d, p12[2] / d };
@ -11416,7 +11416,7 @@ void ok_to_send() {
float ey[3] = { p13[0] - iex[0], p13[1] - iex[1], p13[2] - iex[2] }; float ey[3] = { p13[0] - iex[0], p13[1] - iex[1], p13[2] - iex[2] };
// The magnitude of Y component // The magnitude of Y component
float j = sqrt( sq(ey[0]) + sq(ey[1]) + sq(ey[2]) ); float j = SQRT( sq(ey[0]) + sq(ey[1]) + sq(ey[2]) );
// Convert to a unit vector // Convert to a unit vector
ey[0] /= j; ey[1] /= j; ey[2] /= j; ey[0] /= j; ey[1] /= j; ey[2] /= j;
@ -11433,7 +11433,7 @@ void ok_to_send() {
// Plug them into the equations defined in Wikipedia for Xnew, Ynew and Znew // Plug them into the equations defined in Wikipedia for Xnew, Ynew and Znew
float Xnew = (delta_diagonal_rod_2_tower[A_AXIS] - delta_diagonal_rod_2_tower[B_AXIS] + sq(d)) / (d * 2), float Xnew = (delta_diagonal_rod_2_tower[A_AXIS] - delta_diagonal_rod_2_tower[B_AXIS] + sq(d)) / (d * 2),
Ynew = ((delta_diagonal_rod_2_tower[A_AXIS] - delta_diagonal_rod_2_tower[C_AXIS] + HYPOT2(i, j)) / 2 - i * Xnew) / j, Ynew = ((delta_diagonal_rod_2_tower[A_AXIS] - delta_diagonal_rod_2_tower[C_AXIS] + HYPOT2(i, j)) / 2 - i * Xnew) / j,
Znew = sqrt(delta_diagonal_rod_2_tower[A_AXIS] - HYPOT2(Xnew, Ynew)); Znew = SQRT(delta_diagonal_rod_2_tower[A_AXIS] - HYPOT2(Xnew, Ynew));
// Start from the origin of the old coordinates and add vectors in the // Start from the origin of the old coordinates and add vectors in the
// old coords that represent the Xnew, Ynew and Znew to find the point // old coords that represent the Xnew, Ynew and Znew to find the point
@ -11656,10 +11656,10 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) {
}; };
// Get the linear distance in XYZ // Get the linear distance in XYZ
float cartesian_mm = sqrt(sq(difference[X_AXIS]) + sq(difference[Y_AXIS]) + sq(difference[Z_AXIS])); float cartesian_mm = SQRT(sq(difference[X_AXIS]) + sq(difference[Y_AXIS]) + sq(difference[Z_AXIS]));
// If the move is very short, check the E move distance // If the move is very short, check the E move distance
if (UNEAR_ZERO(cartesian_mm)) cartesian_mm = abs(difference[E_AXIS]); if (UNEAR_ZERO(cartesian_mm)) cartesian_mm = FABS(difference[E_AXIS]);
// No E move either? Game over. // No E move either? Game over.
if (UNEAR_ZERO(cartesian_mm)) return true; if (UNEAR_ZERO(cartesian_mm)) return true;
@ -11947,7 +11947,7 @@ void prepare_move_to_destination() {
extruder_travel = logical[E_AXIS] - current_position[E_AXIS]; extruder_travel = logical[E_AXIS] - current_position[E_AXIS];
// CCW angle of rotation between position and target from the circle center. Only one atan2() trig computation required. // CCW angle of rotation between position and target from the circle center. Only one atan2() trig computation required.
float angular_travel = atan2(r_X * rt_Y - r_Y * rt_X, r_X * rt_X + r_Y * rt_Y); float angular_travel = ATAN2(r_X * rt_Y - r_Y * rt_X, r_X * rt_X + r_Y * rt_Y);
if (angular_travel < 0) angular_travel += RADIANS(360); if (angular_travel < 0) angular_travel += RADIANS(360);
if (clockwise) angular_travel -= RADIANS(360); if (clockwise) angular_travel -= RADIANS(360);
@ -11955,10 +11955,10 @@ void prepare_move_to_destination() {
if (angular_travel == 0 && current_position[X_AXIS] == logical[X_AXIS] && current_position[Y_AXIS] == logical[Y_AXIS]) if (angular_travel == 0 && current_position[X_AXIS] == logical[X_AXIS] && current_position[Y_AXIS] == logical[Y_AXIS])
angular_travel += RADIANS(360); angular_travel += RADIANS(360);
const float mm_of_travel = HYPOT(angular_travel * radius, fabs(linear_travel)); const float mm_of_travel = HYPOT(angular_travel * radius, FABS(linear_travel));
if (mm_of_travel < 0.001) return; if (mm_of_travel < 0.001) return;
uint16_t segments = floor(mm_of_travel / (MM_PER_ARC_SEGMENT)); uint16_t segments = FLOOR(mm_of_travel / (MM_PER_ARC_SEGMENT));
if (segments == 0) segments = 1; if (segments == 0) segments = 1;
/** /**
@ -12155,7 +12155,7 @@ void prepare_move_to_destination() {
else else
C2 = (HYPOT2(sx, sy) - (L1_2 + L2_2)) / (2.0 * L1 * L2); C2 = (HYPOT2(sx, sy) - (L1_2 + L2_2)) / (2.0 * L1 * L2);
S2 = sqrt(1 - sq(C2)); S2 = SQRT(1 - sq(C2));
// Unrotated Arm1 plus rotated Arm2 gives the distance from Center to End // Unrotated Arm1 plus rotated Arm2 gives the distance from Center to End
SK1 = L1 + L2 * C2; SK1 = L1 + L2 * C2;
@ -12164,10 +12164,10 @@ void prepare_move_to_destination() {
SK2 = L2 * S2; SK2 = L2 * S2;
// Angle of Arm1 is the difference between Center-to-End angle and the Center-to-Elbow // Angle of Arm1 is the difference between Center-to-End angle and the Center-to-Elbow
THETA = atan2(SK1, SK2) - atan2(sx, sy); THETA = ATAN2(SK1, SK2) - ATAN2(sx, sy);
// Angle of Arm2 // Angle of Arm2
PSI = atan2(S2, C2); PSI = ATAN2(S2, C2);
delta[A_AXIS] = DEGREES(THETA); // theta is support arm angle delta[A_AXIS] = DEGREES(THETA); // theta is support arm angle
delta[B_AXIS] = DEGREES(THETA + PSI); // equal to sub arm angle (inverted motor) delta[B_AXIS] = DEGREES(THETA + PSI); // equal to sub arm angle (inverted motor)

2
Marlin/digipot_mcp4018.cpp
View File

@ -44,7 +44,7 @@
#define DIGIPOT_A4988_MAX_CURRENT (DIGIPOT_A4988_Itripmax(DIGIPOT_A4988_Vrefmax) - 0.5) #define DIGIPOT_A4988_MAX_CURRENT (DIGIPOT_A4988_Itripmax(DIGIPOT_A4988_Vrefmax) - 0.5)
static byte current_to_wiper(const float current) { static byte current_to_wiper(const float current) {
return byte(ceil(float(DIGIPOT_A4988_FACTOR) * current)); return byte(CEIL(float(DIGIPOT_A4988_FACTOR) * current));
} }
const uint8_t sda_pins[DIGIPOT_I2C_NUM_CHANNELS] = { const uint8_t sda_pins[DIGIPOT_I2C_NUM_CHANNELS] = {

2
Marlin/digipot_mcp4451.cpp
View File

@ -38,7 +38,7 @@
#endif #endif
static byte current_to_wiper(const float current) { static byte current_to_wiper(const float current) {
return byte(ceil(float((DIGIPOT_I2C_FACTOR * current)))); return byte(CEIL(float((DIGIPOT_I2C_FACTOR * current))));
} }
static void i2c_send(const byte addr, const byte a, const byte b) { static void i2c_send(const byte addr, const byte a, const byte b) {

2
Marlin/gcode.h
View File

@ -213,7 +213,7 @@ public:
linear_unit_factor = 1.0; linear_unit_factor = 1.0;
break; break;
} }
volumetric_unit_factor = pow(linear_unit_factor, 3.0); volumetric_unit_factor = POW(linear_unit_factor, 3.0);
} }
inline static float axis_unit_factor(const AxisEnum axis) { inline static float axis_unit_factor(const AxisEnum axis) {

2
Marlin/least_squares_fit.cpp
View File

@ -59,7 +59,7 @@ int finish_incremental_LSF(struct linear_fit_data *lsf) {
lsf->xzbar = lsf->xzbar / N - lsf->xbar * lsf->zbar; lsf->xzbar = lsf->xzbar / N - lsf->xbar * lsf->zbar;
const float DD = lsf->x2bar * lsf->y2bar - sq(lsf->xybar); const float DD = lsf->x2bar * lsf->y2bar - sq(lsf->xybar);
if (fabs(DD) <= 1e-10 * (lsf->max_absx + lsf->max_absy)) if (FABS(DD) <= 1e-10 * (lsf->max_absx + lsf->max_absy))
return 1; return 1;
lsf->A = (lsf->yzbar * lsf->xybar - lsf->xzbar * lsf->y2bar) / DD; lsf->A = (lsf->yzbar * lsf->xybar - lsf->xzbar * lsf->y2bar) / DD;

8
Marlin/least_squares_fit.h
View File

@ -65,8 +65,8 @@ void inline incremental_WLSF(struct linear_fit_data *lsf, const float &x, const
lsf->xzbar += w * x * z; lsf->xzbar += w * x * z;
lsf->yzbar += w * y * z; lsf->yzbar += w * y * z;
lsf->N += w; lsf->N += w;
lsf->max_absx = max(fabs(w * x), lsf->max_absx); lsf->max_absx = max(FABS(w * x), lsf->max_absx);
lsf->max_absy = max(fabs(w * y), lsf->max_absy); lsf->max_absy = max(FABS(w * y), lsf->max_absy);
} }
void inline incremental_LSF(struct linear_fit_data *lsf, const float &x, const float &y, const float &z) { void inline incremental_LSF(struct linear_fit_data *lsf, const float &x, const float &y, const float &z) {
@ -79,8 +79,8 @@ void inline incremental_LSF(struct linear_fit_data *lsf, const float &x, const f
lsf->xybar += x * y; lsf->xybar += x * y;
lsf->xzbar += x * z; lsf->xzbar += x * z;
lsf->yzbar += y * z; lsf->yzbar += y * z;
lsf->max_absx = max(fabs(x), lsf->max_absx); lsf->max_absx = max(FABS(x), lsf->max_absx);
lsf->max_absy = max(fabs(y), lsf->max_absy); lsf->max_absy = max(FABS(y), lsf->max_absy);
lsf->N += 1.0; lsf->N += 1.0;
} }

16
Marlin/macros.h
View File

@ -106,7 +106,6 @@
#define RADIANS(d) ((d)*M_PI/180.0) #define RADIANS(d) ((d)*M_PI/180.0)
#define DEGREES(r) ((r)*180.0/M_PI) #define DEGREES(r) ((r)*180.0/M_PI)
#define HYPOT2(x,y) (sq(x)+sq(y)) #define HYPOT2(x,y) (sq(x)+sq(y))
#define HYPOT(x,y) sqrt(HYPOT2(x,y))
#define SIGN(a) ((a>0)-(a<0)) #define SIGN(a) ((a>0)-(a<0))
@ -193,4 +192,17 @@
#define RECIPROCAL(x) (NEAR_ZERO(x) ? 0.0 : 1.0 / (x)) #define RECIPROCAL(x) (NEAR_ZERO(x) ? 0.0 : 1.0 / (x))
#define FIXFLOAT(f) (f + 0.00001) #define FIXFLOAT(f) (f + 0.00001)
#endif // __MACROS_H //
// Maths macros that can be overridden by HAL
//
#define ATAN2(y, x) atan2(y, x)
#define FABS(x) fabs(x)
#define POW(x, y) pow(x, y)
#define SQRT(x) sqrt(x)
#define CEIL(x) ceil(x)
#define FLOOR(x) floor(x)
#define LROUND(x) lround(x)
#define FMOD(x, y) fmod(x, y)
#define HYPOT(x,y) SQRT(HYPOT2(x,y))
#endif //__MACROS_H

8
Marlin/nozzle.cpp
View File

@ -80,16 +80,16 @@ void Nozzle::zigzag(
for (uint8_t j = 0; j < strokes; j++) { for (uint8_t j = 0; j < strokes; j++) {
for (uint8_t i = 0; i < (objects << 1); i++) { for (uint8_t i = 0; i < (objects << 1); i++) {
float const x = start.x + ( nozzle_clean_horizontal ? i * P : (A/P) * (P - fabs(fmod((i*P), (2*P)) - P)) ); float const x = start.x + ( nozzle_clean_horizontal ? i * P : (A/P) * (P - FABS(FMOD((i*P), (2*P)) - P)) );
float const y = start.y + (!nozzle_clean_horizontal ? i * P : (A/P) * (P - fabs(fmod((i*P), (2*P)) - P)) ); float const y = start.y + (!nozzle_clean_horizontal ? i * P : (A/P) * (P - FABS(FMOD((i*P), (2*P)) - P)) );
do_blocking_move_to_xy(x, y); do_blocking_move_to_xy(x, y);
if (i == 0) do_blocking_move_to_z(start.z); if (i == 0) do_blocking_move_to_z(start.z);
} }
for (int i = (objects << 1); i > -1; i--) { for (int i = (objects << 1); i > -1; i--) {
float const x = start.x + ( nozzle_clean_horizontal ? i * P : (A/P) * (P - fabs(fmod((i*P), (2*P)) - P)) ); float const x = start.x + ( nozzle_clean_horizontal ? i * P : (A/P) * (P - FABS(FMOD((i*P), (2*P)) - P)) );
float const y = start.y + (!nozzle_clean_horizontal ? i * P : (A/P) * (P - fabs(fmod((i*P), (2*P)) - P)) ); float const y = start.y + (!nozzle_clean_horizontal ? i * P : (A/P) * (P - FABS(FMOD((i*P), (2*P)) - P)) );
do_blocking_move_to_xy(x, y); do_blocking_move_to_xy(x, y);
} }

4
Marlin/nozzle.h
View File

@ -29,8 +29,8 @@
#if ENABLED(NOZZLE_CLEAN_FEATURE) #if ENABLED(NOZZLE_CLEAN_FEATURE)
constexpr float nozzle_clean_start_point[4] = NOZZLE_CLEAN_START_POINT, constexpr float nozzle_clean_start_point[4] = NOZZLE_CLEAN_START_POINT,
nozzle_clean_end_point[4] = NOZZLE_CLEAN_END_POINT, nozzle_clean_end_point[4] = NOZZLE_CLEAN_END_POINT,
nozzle_clean_length = fabs(nozzle_clean_start_point[X_AXIS] - nozzle_clean_end_point[X_AXIS]), //abs x size of wipe pad nozzle_clean_length = FABS(nozzle_clean_start_point[X_AXIS] - nozzle_clean_end_point[X_AXIS]), //abs x size of wipe pad
nozzle_clean_height = fabs(nozzle_clean_start_point[Y_AXIS] - nozzle_clean_end_point[Y_AXIS]); //abs y size of wipe pad nozzle_clean_height = FABS(nozzle_clean_start_point[Y_AXIS] - nozzle_clean_end_point[Y_AXIS]); //abs y size of wipe pad
constexpr bool nozzle_clean_horizontal = nozzle_clean_length >= nozzle_clean_height; //whether to zig-zag horizontally or vertically constexpr bool nozzle_clean_horizontal = nozzle_clean_length >= nozzle_clean_height; //whether to zig-zag horizontally or vertically
#endif // NOZZLE_CLEAN_FEATURE #endif // NOZZLE_CLEAN_FEATURE

64
Marlin/planner.cpp
View File

@ -178,23 +178,23 @@ void Planner::init() {
* by the provided factors. * by the provided factors.
*/ */
void Planner::calculate_trapezoid_for_block(block_t* const block, const float &entry_factor, const float &exit_factor) { void Planner::calculate_trapezoid_for_block(block_t* const block, const float &entry_factor, const float &exit_factor) {
uint32_t initial_rate = ceil(block->nominal_rate * entry_factor), uint32_t initial_rate = CEIL(block->nominal_rate * entry_factor),
final_rate = ceil(block->nominal_rate * exit_factor); // (steps per second) final_rate = CEIL(block->nominal_rate * exit_factor); // (steps per second)
// Limit minimal step rate (Otherwise the timer will overflow.) // Limit minimal step rate (Otherwise the timer will overflow.)
NOLESS(initial_rate, MINIMAL_STEP_RATE); NOLESS(initial_rate, MINIMAL_STEP_RATE);
NOLESS(final_rate, MINIMAL_STEP_RATE); NOLESS(final_rate, MINIMAL_STEP_RATE);
int32_t accel = block->acceleration_steps_per_s2, int32_t accel = block->acceleration_steps_per_s2,
accelerate_steps = ceil(estimate_acceleration_distance(initial_rate, block->nominal_rate, accel)), accelerate_steps = CEIL(estimate_acceleration_distance(initial_rate, block->nominal_rate, accel)),
decelerate_steps = floor(estimate_acceleration_distance(block->nominal_rate, final_rate, -accel)), decelerate_steps = FLOOR(estimate_acceleration_distance(block->nominal_rate, final_rate, -accel)),
plateau_steps = block->step_event_count - accelerate_steps - decelerate_steps; plateau_steps = block->step_event_count - accelerate_steps - decelerate_steps;
// Is the Plateau of Nominal Rate smaller than nothing? That means no cruising, and we will // Is the Plateau of Nominal Rate smaller than nothing? That means no cruising, and we will
// have to use intersection_distance() to calculate when to abort accel and start braking // have to use intersection_distance() to calculate when to abort accel and start braking
// in order to reach the final_rate exactly at the end of this block. // in order to reach the final_rate exactly at the end of this block.
if (plateau_steps < 0) { if (plateau_steps < 0) {
accelerate_steps = ceil(intersection_distance(initial_rate, final_rate, accel, block->step_event_count)); accelerate_steps = CEIL(intersection_distance(initial_rate, final_rate, accel, block->step_event_count));
NOLESS(accelerate_steps, 0); // Check limits due to numerical round-off NOLESS(accelerate_steps, 0); // Check limits due to numerical round-off
accelerate_steps = min((uint32_t)accelerate_steps, block->step_event_count);//(We can cast here to unsigned, because the above line ensures that we are above zero) accelerate_steps = min((uint32_t)accelerate_steps, block->step_event_count);//(We can cast here to unsigned, because the above line ensures that we are above zero)
plateau_steps = 0; plateau_steps = 0;
@ -221,8 +221,8 @@ void Planner::calculate_trapezoid_for_block(block_t* const block, const float &e
// This method will calculate the junction jerk as the euclidean distance between the nominal // This method will calculate the junction jerk as the euclidean distance between the nominal
// velocities of the respective blocks. // velocities of the respective blocks.
//inline float junction_jerk(block_t *before, block_t *after) { //inline float junction_jerk(block_t *before, block_t *after) {
// return sqrt( // return SQRT(
// pow((before->speed_x-after->speed_x), 2)+pow((before->speed_y-after->speed_y), 2)); // POW((before->speed_x-after->speed_x), 2)+POW((before->speed_y-after->speed_y), 2));
//} //}
@ -693,22 +693,22 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const
// Calculate target position in absolute steps // Calculate target position in absolute steps
//this should be done after the wait, because otherwise a M92 code within the gcode disrupts this calculation somehow //this should be done after the wait, because otherwise a M92 code within the gcode disrupts this calculation somehow
const long target[XYZE] = { const long target[XYZE] = {
lround(a * axis_steps_per_mm[X_AXIS]), LROUND(a * axis_steps_per_mm[X_AXIS]),
lround(b * axis_steps_per_mm[Y_AXIS]), LROUND(b * axis_steps_per_mm[Y_AXIS]),
lround(c * axis_steps_per_mm[Z_AXIS]), LROUND(c * axis_steps_per_mm[Z_AXIS]),
lround(e * axis_steps_per_mm[E_AXIS_N]) LROUND(e * axis_steps_per_mm[E_AXIS_N])
}; };
// When changing extruders recalculate steps corresponding to the E position // When changing extruders recalculate steps corresponding to the E position
#if ENABLED(DISTINCT_E_FACTORS) #if ENABLED(DISTINCT_E_FACTORS)
if (last_extruder != extruder && axis_steps_per_mm[E_AXIS_N] != axis_steps_per_mm[E_AXIS + last_extruder]) { if (last_extruder != extruder && axis_steps_per_mm[E_AXIS_N] != axis_steps_per_mm[E_AXIS + last_extruder]) {
position[E_AXIS] = lround(position[E_AXIS] * axis_steps_per_mm[E_AXIS_N] * steps_to_mm[E_AXIS + last_extruder]); position[E_AXIS] = LROUND(position[E_AXIS] * axis_steps_per_mm[E_AXIS_N] * steps_to_mm[E_AXIS + last_extruder]);
last_extruder = extruder; last_extruder = extruder;
} }
#endif #endif
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
const float mm_D_float = sqrt(sq(a - position_float[X_AXIS]) + sq(b - position_float[Y_AXIS])); const float mm_D_float = SQRT(sq(a - position_float[X_AXIS]) + sq(b - position_float[Y_AXIS]));
#endif #endif
const long da = target[X_AXIS] - position[X_AXIS], const long da = target[X_AXIS] - position[X_AXIS],
@ -1036,10 +1036,10 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const
delta_mm[E_AXIS] = esteps_float * steps_to_mm[E_AXIS_N]; delta_mm[E_AXIS] = esteps_float * steps_to_mm[E_AXIS_N];
if (block->steps[X_AXIS] < MIN_STEPS_PER_SEGMENT && block->steps[Y_AXIS] < MIN_STEPS_PER_SEGMENT && block->steps[Z_AXIS] < MIN_STEPS_PER_SEGMENT) { if (block->steps[X_AXIS] < MIN_STEPS_PER_SEGMENT && block->steps[Y_AXIS] < MIN_STEPS_PER_SEGMENT && block->steps[Z_AXIS] < MIN_STEPS_PER_SEGMENT) {
block->millimeters = fabs(delta_mm[E_AXIS]); block->millimeters = FABS(delta_mm[E_AXIS]);
} }
else { else {
block->millimeters = sqrt( block->millimeters = SQRT(
#if CORE_IS_XY #if CORE_IS_XY
sq(delta_mm[X_HEAD]) + sq(delta_mm[Y_HEAD]) + sq(delta_mm[Z_AXIS]) sq(delta_mm[X_HEAD]) + sq(delta_mm[Y_HEAD]) + sq(delta_mm[Z_AXIS])
#elif CORE_IS_XZ #elif CORE_IS_XZ
@ -1061,15 +1061,15 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const
// Slow down when the buffer starts to empty, rather than wait at the corner for a buffer refill // Slow down when the buffer starts to empty, rather than wait at the corner for a buffer refill
#if ENABLED(SLOWDOWN) || ENABLED(ULTRA_LCD) || defined(XY_FREQUENCY_LIMIT) #if ENABLED(SLOWDOWN) || ENABLED(ULTRA_LCD) || defined(XY_FREQUENCY_LIMIT)
// Segment time im micro seconds // Segment time im micro seconds
unsigned long segment_time = lround(1000000.0 / inverse_mm_s); unsigned long segment_time = LROUND(1000000.0 / inverse_mm_s);
#endif #endif
#if ENABLED(SLOWDOWN) #if ENABLED(SLOWDOWN)
if (WITHIN(moves_queued, 2, (BLOCK_BUFFER_SIZE) / 2 - 1)) { if (WITHIN(moves_queued, 2, (BLOCK_BUFFER_SIZE) / 2 - 1)) {
if (segment_time < min_segment_time) { if (segment_time < min_segment_time) {
// buffer is draining, add extra time. The amount of time added increases if the buffer is still emptied more. // buffer is draining, add extra time. The amount of time added increases if the buffer is still emptied more.
inverse_mm_s = 1000000.0 / (segment_time + lround(2 * (min_segment_time - segment_time) / moves_queued)); inverse_mm_s = 1000000.0 / (segment_time + LROUND(2 * (min_segment_time - segment_time) / moves_queued));
#if defined(XY_FREQUENCY_LIMIT) || ENABLED(ULTRA_LCD) #if defined(XY_FREQUENCY_LIMIT) || ENABLED(ULTRA_LCD)
segment_time = lround(1000000.0 / inverse_mm_s); segment_time = LROUND(1000000.0 / inverse_mm_s);
#endif #endif
} }
} }
@ -1082,7 +1082,7 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const
#endif #endif
block->nominal_speed = block->millimeters * inverse_mm_s; // (mm/sec) Always > 0 block->nominal_speed = block->millimeters * inverse_mm_s; // (mm/sec) Always > 0
block->nominal_rate = ceil(block->step_event_count * inverse_mm_s); // (step/sec) Always > 0 block->nominal_rate = CEIL(block->step_event_count * inverse_mm_s); // (step/sec) Always > 0
#if ENABLED(FILAMENT_WIDTH_SENSOR) #if ENABLED(FILAMENT_WIDTH_SENSOR)
static float filwidth_e_count = 0, filwidth_delay_dist = 0; static float filwidth_e_count = 0, filwidth_delay_dist = 0;
@ -1121,7 +1121,7 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const
// Calculate and limit speed in mm/sec for each axis // Calculate and limit speed in mm/sec for each axis
float current_speed[NUM_AXIS], speed_factor = 1.0; // factor <1 decreases speed float current_speed[NUM_AXIS], speed_factor = 1.0; // factor <1 decreases speed
LOOP_XYZE(i) { LOOP_XYZE(i) {
const float cs = fabs(current_speed[i] = delta_mm[i] * inverse_mm_s); const float cs = FABS(current_speed[i] = delta_mm[i] * inverse_mm_s);
#if ENABLED(DISTINCT_E_FACTORS) #if ENABLED(DISTINCT_E_FACTORS)
if (i == E_AXIS) i += extruder; if (i == E_AXIS) i += extruder;
#endif #endif
@ -1134,7 +1134,7 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const
// Check and limit the xy direction change frequency // Check and limit the xy direction change frequency
const unsigned char direction_change = block->direction_bits ^ old_direction_bits; const unsigned char direction_change = block->direction_bits ^ old_direction_bits;
old_direction_bits = block->direction_bits; old_direction_bits = block->direction_bits;
segment_time = lround((float)segment_time / speed_factor); segment_time = LROUND((float)segment_time / speed_factor);
long xs0 = axis_segment_time[X_AXIS][0], long xs0 = axis_segment_time[X_AXIS][0],
xs1 = axis_segment_time[X_AXIS][1], xs1 = axis_segment_time[X_AXIS][1],
@ -1178,7 +1178,7 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const
uint32_t accel; uint32_t accel;
if (!block->steps[X_AXIS] && !block->steps[Y_AXIS] && !block->steps[Z_AXIS]) { if (!block->steps[X_AXIS] && !block->steps[Y_AXIS] && !block->steps[Z_AXIS]) {
// convert to: acceleration steps/sec^2 // convert to: acceleration steps/sec^2
accel = ceil(retract_acceleration * steps_per_mm); accel = CEIL(retract_acceleration * steps_per_mm);
} }
else { else {
#define LIMIT_ACCEL_LONG(AXIS,INDX) do{ \ #define LIMIT_ACCEL_LONG(AXIS,INDX) do{ \
@ -1196,7 +1196,7 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const
}while(0) }while(0)
// Start with print or travel acceleration // Start with print or travel acceleration
accel = ceil((esteps ? acceleration : travel_acceleration) * steps_per_mm); accel = CEIL((esteps ? acceleration : travel_acceleration) * steps_per_mm);
#if ENABLED(DISTINCT_E_FACTORS) #if ENABLED(DISTINCT_E_FACTORS)
#define ACCEL_IDX extruder #define ACCEL_IDX extruder
@ -1267,8 +1267,8 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const
// Skip and avoid divide by zero for straight junctions at 180 degrees. Limit to min() of nominal speeds. // Skip and avoid divide by zero for straight junctions at 180 degrees. Limit to min() of nominal speeds.
if (cos_theta > -0.95) { if (cos_theta > -0.95) {
// Compute maximum junction velocity based on maximum acceleration and junction deviation // Compute maximum junction velocity based on maximum acceleration and junction deviation
float sin_theta_d2 = sqrt(0.5 * (1.0 - cos_theta)); // Trig half angle identity. Always positive. float sin_theta_d2 = SQRT(0.5 * (1.0 - cos_theta)); // Trig half angle identity. Always positive.
NOMORE(vmax_junction, sqrt(block->acceleration * junction_deviation * sin_theta_d2 / (1.0 - sin_theta_d2))); NOMORE(vmax_junction, SQRT(block->acceleration * junction_deviation * sin_theta_d2 / (1.0 - sin_theta_d2)));
} }
} }
} }
@ -1286,7 +1286,7 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const
float safe_speed = block->nominal_speed; float safe_speed = block->nominal_speed;
uint8_t limited = 0; uint8_t limited = 0;
LOOP_XYZE(i) { LOOP_XYZE(i) {
const float jerk = fabs(current_speed[i]), maxj = max_jerk[i]; const float jerk = FABS(current_speed[i]), maxj = max_jerk[i];
if (jerk > maxj) { if (jerk > maxj) {
if (limited) { if (limited) {
const float mjerk = maxj * block->nominal_speed; const float mjerk = maxj * block->nominal_speed;
@ -1395,7 +1395,7 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const
&& (uint32_t)esteps != block->step_event_count && (uint32_t)esteps != block->step_event_count
&& de_float > 0.0; && de_float > 0.0;
if (block->use_advance_lead) if (block->use_advance_lead)
block->abs_adv_steps_multiplier8 = lround( block->abs_adv_steps_multiplier8 = LROUND(
extruder_advance_k extruder_advance_k
* (UNEAR_ZERO(advance_ed_ratio) ? de_float / mm_D_float : advance_ed_ratio) // Use the fixed ratio, if set * (UNEAR_ZERO(advance_ed_ratio) ? de_float / mm_D_float : advance_ed_ratio) // Use the fixed ratio, if set
* (block->nominal_speed / (float)block->nominal_rate) * (block->nominal_speed / (float)block->nominal_rate)
@ -1458,10 +1458,10 @@ void Planner::_set_position_mm(const float &a, const float &b, const float &c, c
#else #else
#define _EINDEX E_AXIS #define _EINDEX E_AXIS
#endif #endif
long na = position[X_AXIS] = lround(a * axis_steps_per_mm[X_AXIS]), long na = position[X_AXIS] = LROUND(a * axis_steps_per_mm[X_AXIS]),
nb = position[Y_AXIS] = lround(b * axis_steps_per_mm[Y_AXIS]), nb = position[Y_AXIS] = LROUND(b * axis_steps_per_mm[Y_AXIS]),
nc = position[Z_AXIS] = lround(c * axis_steps_per_mm[Z_AXIS]), nc = position[Z_AXIS] = LROUND(c * axis_steps_per_mm[Z_AXIS]),
ne = position[E_AXIS] = lround(e * axis_steps_per_mm[_EINDEX]); ne = position[E_AXIS] = LROUND(e * axis_steps_per_mm[_EINDEX]);
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
position_float[X_AXIS] = a; position_float[X_AXIS] = a;
position_float[Y_AXIS] = b; position_float[Y_AXIS] = b;
@ -1514,7 +1514,7 @@ void Planner::set_position_mm(const AxisEnum axis, const float &v) {
#else #else
const uint8_t axis_index = axis; const uint8_t axis_index = axis;
#endif #endif
position[axis] = lround(v * axis_steps_per_mm[axis_index]); position[axis] = LROUND(v * axis_steps_per_mm[axis_index]);
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
position_float[axis] = v; position_float[axis] = v;
#endif #endif

2
Marlin/planner.h
View File

@ -454,7 +454,7 @@ class Planner {
* 'distance'. * 'distance'.
*/ */
static float max_allowable_speed(const float &accel, const float &target_velocity, const float &distance) { static float max_allowable_speed(const float &accel, const float &target_velocity, const float &distance) {
return sqrt(sq(target_velocity) - 2 * accel * distance); return SQRT(sq(target_velocity) - 2 * accel * distance);
} }
static void calculate_trapezoid_for_block(block_t* const block, const float &entry_factor, const float &exit_factor); static void calculate_trapezoid_for_block(block_t* const block, const float &entry_factor, const float &exit_factor);

2
Marlin/planner_bezier.cpp
View File

@ -64,7 +64,7 @@ inline static float eval_bezier(float a, float b, float c, float d, float t) {
* We approximate Euclidean distance with the sum of the coordinates * We approximate Euclidean distance with the sum of the coordinates
* offset (so-called "norm 1"), which is quicker to compute. * offset (so-called "norm 1"), which is quicker to compute.
*/ */
inline static float dist1(float x1, float y1, float x2, float y2) { return fabs(x1 - x2) + fabs(y1 - y2); } inline static float dist1(float x1, float y1, float x2, float y2) { return FABS(x1 - x2) + FABS(y1 - y2); }
/** /**
* The algorithm for computing the step is loosely based on the one in Kig * The algorithm for computing the step is loosely based on the one in Kig

8
Marlin/qr_solve.cpp
View File

@ -521,7 +521,7 @@ float dnrm2(int n, float x[], int incx)
} }
ix += incx; ix += incx;
} }
norm = scale * sqrt(ssq); norm = scale * SQRT(ssq);
} }
return norm; return norm;
} }
@ -791,12 +791,12 @@ void dqrdc(float a[], int lda, int n, int p, float qraux[], int jpvt[],
daxpy(n - l + 1, t, a + l - 1 + (l - 1)*lda, 1, a + l - 1 + (j - 1)*lda, 1); daxpy(n - l + 1, t, a + l - 1 + (l - 1)*lda, 1, a + l - 1 + (j - 1)*lda, 1);
if (pl <= j && j <= pu) { if (pl <= j && j <= pu) {
if (qraux[j - 1] != 0.0) { if (qraux[j - 1] != 0.0) {
tt = 1.0 - pow(r8_abs(a[l - 1 + (j - 1) * lda]) / qraux[j - 1], 2); tt = 1.0 - POW(r8_abs(a[l - 1 + (j - 1) * lda]) / qraux[j - 1], 2);
tt = r8_max(tt, 0.0); tt = r8_max(tt, 0.0);
t = tt; t = tt;
tt = 1.0 + 0.05 * tt * pow(qraux[j - 1] / work[j - 1], 2); tt = 1.0 + 0.05 * tt * POW(qraux[j - 1] / work[j - 1], 2);
if (tt != 1.0) if (tt != 1.0)
qraux[j - 1] = qraux[j - 1] * sqrt(t); qraux[j - 1] = qraux[j - 1] * SQRT(t);
else { else {
qraux[j - 1] = dnrm2(n - l, a + l + (j - 1) * lda, 1); qraux[j - 1] = dnrm2(n - l, a + l + (j - 1) * lda, 1);
work[j - 1] = qraux[j - 1]; work[j - 1] = qraux[j - 1];

2
Marlin/serial.h
View File

@ -40,7 +40,7 @@
extern const char echomagic[] PROGMEM; extern const char echomagic[] PROGMEM;
extern const char errormagic[] PROGMEM; extern const char errormagic[] PROGMEM;
#define SERIAL_CHAR(x) (MYSERIAL.write(x)) #define SERIAL_CHAR(x) ((void)MYSERIAL.write(x))
#define SERIAL_EOL() SERIAL_CHAR('\n') #define SERIAL_EOL() SERIAL_CHAR('\n')
#define SERIAL_PROTOCOLCHAR(x) SERIAL_CHAR(x) #define SERIAL_PROTOCOLCHAR(x) SERIAL_CHAR(x)

2
Marlin/temperature.cpp
View File

@ -749,7 +749,7 @@ void Temperature::manage_heater() {
#if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
// Make sure measured temperatures are close together // Make sure measured temperatures are close together
if (fabs(current_temperature[0] - redundant_temperature) > MAX_REDUNDANT_TEMP_SENSOR_DIFF) if (FABS(current_temperature[0] - redundant_temperature) > MAX_REDUNDANT_TEMP_SENSOR_DIFF)
_temp_error(0, PSTR(MSG_REDUNDANCY), PSTR(MSG_ERR_REDUNDANT_TEMP)); _temp_error(0, PSTR(MSG_REDUNDANCY), PSTR(MSG_ERR_REDUNDANT_TEMP));
#endif #endif

8
Marlin/ubl_G29.cpp
View File

@ -498,7 +498,7 @@
if (parser.seen('B')) { if (parser.seen('B')) {
g29_card_thickness = parser.has_value() ? parser.value_float() : measure_business_card_thickness(height); g29_card_thickness = parser.has_value() ? parser.value_float() : measure_business_card_thickness(height);
if (fabs(g29_card_thickness) > 1.5) { if (FABS(g29_card_thickness) > 1.5) {
SERIAL_PROTOCOLLNPGM("?Error in Business Card measurement."); SERIAL_PROTOCOLLNPGM("?Error in Business Card measurement.");
return; return;
} }
@ -562,7 +562,7 @@
// P3.13 1000X distance weighting, approaches simple average of nearest points // P3.13 1000X distance weighting, approaches simple average of nearest points
const float weight_power = (cvf - 3.10) * 100.0, // 3.12345 -> 2.345 const float weight_power = (cvf - 3.10) * 100.0, // 3.12345 -> 2.345
weight_factor = weight_power ? pow(10.0, weight_power) : 0; weight_factor = weight_power ? POW(10.0, weight_power) : 0;
smart_fill_wlsf(weight_factor); smart_fill_wlsf(weight_factor);
} }
break; break;
@ -774,7 +774,7 @@
SERIAL_ECHO_F(mean, 6); SERIAL_ECHO_F(mean, 6);
SERIAL_EOL(); SERIAL_EOL();
const float sigma = sqrt(sum_of_diff_squared / (n + 1)); const float sigma = SQRT(sum_of_diff_squared / (n + 1));
SERIAL_ECHOPGM("Standard Deviation: "); SERIAL_ECHOPGM("Standard Deviation: ");
SERIAL_ECHO_F(sigma, 6); SERIAL_ECHO_F(sigma, 6);
SERIAL_EOL(); SERIAL_EOL();
@ -1508,7 +1508,7 @@
do_blocking_move_to_z(Z_CLEARANCE_BETWEEN_PROBES); // Move the nozzle to where we are going to edit do_blocking_move_to_z(Z_CLEARANCE_BETWEEN_PROBES); // Move the nozzle to where we are going to edit
do_blocking_move_to_xy(LOGICAL_X_POSITION(rawx), LOGICAL_Y_POSITION(rawy)); do_blocking_move_to_xy(LOGICAL_X_POSITION(rawx), LOGICAL_Y_POSITION(rawy));
new_z = floor(new_z * 1000.0) * 0.001; // Chop off digits after the 1000ths place new_z = FLOOR(new_z * 1000.0) * 0.001; // Chop off digits after the 1000ths place
KEEPALIVE_STATE(PAUSED_FOR_USER); KEEPALIVE_STATE(PAUSED_FOR_USER);
has_control_of_lcd_panel = true; has_control_of_lcd_panel = true;

10
Marlin/ubl_motion.cpp
View File

@ -492,15 +492,15 @@
#if ENABLED(DELTA) // apply delta inverse_kinematics #if ENABLED(DELTA) // apply delta inverse_kinematics
const float delta_A = rz + sqrt( delta_diagonal_rod_2_tower[A_AXIS] const float delta_A = rz + SQRT( delta_diagonal_rod_2_tower[A_AXIS]
- HYPOT2( delta_tower[A_AXIS][X_AXIS] - rx, - HYPOT2( delta_tower[A_AXIS][X_AXIS] - rx,
delta_tower[A_AXIS][Y_AXIS] - ry )); delta_tower[A_AXIS][Y_AXIS] - ry ));
const float delta_B = rz + sqrt( delta_diagonal_rod_2_tower[B_AXIS] const float delta_B = rz + SQRT( delta_diagonal_rod_2_tower[B_AXIS]
- HYPOT2( delta_tower[B_AXIS][X_AXIS] - rx, - HYPOT2( delta_tower[B_AXIS][X_AXIS] - rx,
delta_tower[B_AXIS][Y_AXIS] - ry )); delta_tower[B_AXIS][Y_AXIS] - ry ));
const float delta_C = rz + sqrt( delta_diagonal_rod_2_tower[C_AXIS] const float delta_C = rz + SQRT( delta_diagonal_rod_2_tower[C_AXIS]
- HYPOT2( delta_tower[C_AXIS][X_AXIS] - rx, - HYPOT2( delta_tower[C_AXIS][X_AXIS] - rx,
delta_tower[C_AXIS][Y_AXIS] - ry )); delta_tower[C_AXIS][Y_AXIS] - ry ));
@ -516,8 +516,8 @@
inverse_kinematics(lseg); // this writes delta[ABC] from lseg[XYZ] inverse_kinematics(lseg); // this writes delta[ABC] from lseg[XYZ]
// should move the feedrate scaling to scara inverse_kinematics // should move the feedrate scaling to scara inverse_kinematics
float adiff = abs(delta[A_AXIS] - scara_oldA), const float adiff = FABS(delta[A_AXIS] - scara_oldA),
bdiff = abs(delta[B_AXIS] - scara_oldB); bdiff = FABS(delta[B_AXIS] - scara_oldB);
scara_oldA = delta[A_AXIS]; scara_oldA = delta[A_AXIS];
scara_oldB = delta[B_AXIS]; scara_oldB = delta[B_AXIS];
float s_feedrate = max(adiff, bdiff) * scara_feed_factor; float s_feedrate = max(adiff, bdiff) * scara_feed_factor;

58
Marlin/ultralcd.cpp
View File

@ -49,7 +49,7 @@
bool ubl_lcd_map_control = false; bool ubl_lcd_map_control = false;
#endif #endif
int lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2], lcd_preheat_fan_speed[2]; int16_t lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2], lcd_preheat_fan_speed[2];
#if ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT) #if ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT)
millis_t previous_lcd_status_ms = 0; millis_t previous_lcd_status_ms = 0;
@ -184,7 +184,7 @@ uint16_t max_display_update_time = 0;
void menu_action_setting_edit_callback_ ## _name(const char * const pstr, _type * const ptr, const _type minValue, const _type maxValue, const screenFunc_t callback, const bool live=false); \ void menu_action_setting_edit_callback_ ## _name(const char * const pstr, _type * const ptr, const _type minValue, const _type maxValue, const screenFunc_t callback, const bool live=false); \
typedef void _name##_void typedef void _name##_void
DECLARE_MENU_EDIT_TYPE(int, int3); DECLARE_MENU_EDIT_TYPE(int16_t, int3);
DECLARE_MENU_EDIT_TYPE(uint8_t, int8); DECLARE_MENU_EDIT_TYPE(uint8_t, int8);
DECLARE_MENU_EDIT_TYPE(float, float3); DECLARE_MENU_EDIT_TYPE(float, float3);
DECLARE_MENU_EDIT_TYPE(float, float32); DECLARE_MENU_EDIT_TYPE(float, float32);
@ -193,7 +193,7 @@ uint16_t max_display_update_time = 0;
DECLARE_MENU_EDIT_TYPE(float, float51); DECLARE_MENU_EDIT_TYPE(float, float51);
DECLARE_MENU_EDIT_TYPE(float, float52); DECLARE_MENU_EDIT_TYPE(float, float52);
DECLARE_MENU_EDIT_TYPE(float, float62); DECLARE_MENU_EDIT_TYPE(float, float62);
DECLARE_MENU_EDIT_TYPE(unsigned long, long5); DECLARE_MENU_EDIT_TYPE(uint32_t, long5);
void menu_action_setting_edit_bool(const char* pstr, bool* ptr); void menu_action_setting_edit_bool(const char* pstr, bool* ptr);
void menu_action_setting_edit_callback_bool(const char* pstr, bool* ptr, screenFunc_t callbackFunc); void menu_action_setting_edit_callback_bool(const char* pstr, bool* ptr, screenFunc_t callbackFunc);
@ -602,7 +602,7 @@ void lcd_status_screen() {
} }
#if ENABLED(ULTIPANEL_FEEDMULTIPLY) #if ENABLED(ULTIPANEL_FEEDMULTIPLY)
const int new_frm = feedrate_percentage + (int32_t)encoderPosition; const int16_t new_frm = feedrate_percentage + (int32_t)encoderPosition;
// Dead zone at 100% feedrate // Dead zone at 100% feedrate
if ((feedrate_percentage < 100 && new_frm > 100) || (feedrate_percentage > 100 && new_frm < 100)) { if ((feedrate_percentage < 100 && new_frm > 100) || (feedrate_percentage > 100 && new_frm < 100)) {
feedrate_percentage = 100; feedrate_percentage = 100;
@ -966,7 +966,7 @@ void kill_screen(const char* lcd_msg) {
if (lcd_clicked) { defer_return_to_status = false; return lcd_goto_previous_menu(); } if (lcd_clicked) { defer_return_to_status = false; return lcd_goto_previous_menu(); }
ENCODER_DIRECTION_NORMAL(); ENCODER_DIRECTION_NORMAL();
if (encoderPosition) { if (encoderPosition) {
const int babystep_increment = (int32_t)encoderPosition * (BABYSTEP_MULTIPLICATOR); const int16_t babystep_increment = (int32_t)encoderPosition * (BABYSTEP_MULTIPLICATOR);
encoderPosition = 0; encoderPosition = 0;
lcdDrawUpdate = LCDVIEW_REDRAW_NOW; lcdDrawUpdate = LCDVIEW_REDRAW_NOW;
thermalManager.babystep_axis(axis, babystep_increment); thermalManager.babystep_axis(axis, babystep_increment);
@ -990,7 +990,7 @@ void kill_screen(const char* lcd_msg) {
defer_return_to_status = true; defer_return_to_status = true;
ENCODER_DIRECTION_NORMAL(); ENCODER_DIRECTION_NORMAL();
if (encoderPosition) { if (encoderPosition) {
const int babystep_increment = (int32_t)encoderPosition * (BABYSTEP_MULTIPLICATOR); const int16_t babystep_increment = (int32_t)encoderPosition * (BABYSTEP_MULTIPLICATOR);
encoderPosition = 0; encoderPosition = 0;
const float new_zoffset = zprobe_zoffset + planner.steps_to_mm[Z_AXIS] * babystep_increment; const float new_zoffset = zprobe_zoffset + planner.steps_to_mm[Z_AXIS] * babystep_increment;
@ -1021,7 +1021,7 @@ void kill_screen(const char* lcd_msg) {
float mesh_edit_value, mesh_edit_accumulator; // We round mesh_edit_value to 2.5 decimal places. So we keep a float mesh_edit_value, mesh_edit_accumulator; // We round mesh_edit_value to 2.5 decimal places. So we keep a
// separate value that doesn't lose precision. // separate value that doesn't lose precision.
static int ubl_encoderPosition = 0; static int16_t ubl_encoderPosition = 0;
static void _lcd_mesh_fine_tune(const char* msg) { static void _lcd_mesh_fine_tune(const char* msg) {
defer_return_to_status = true; defer_return_to_status = true;
@ -1275,7 +1275,7 @@ void kill_screen(const char* lcd_msg) {
* "Prepare" submenu items * "Prepare" submenu items
* *
*/ */
void _lcd_preheat(const int endnum, const int16_t temph, const int16_t tempb, const int16_t fan) { void _lcd_preheat(const int16_t endnum, const int16_t temph, const int16_t tempb, const int16_t fan) {
if (temph > 0) thermalManager.setTargetHotend(min(heater_maxtemp[endnum], temph), endnum); if (temph > 0) thermalManager.setTargetHotend(min(heater_maxtemp[endnum], temph), endnum);
#if TEMP_SENSOR_BED != 0 #if TEMP_SENSOR_BED != 0
if (tempb >= 0) thermalManager.setTargetBed(tempb); if (tempb >= 0) thermalManager.setTargetBed(tempb);
@ -1807,7 +1807,7 @@ void kill_screen(const char* lcd_msg) {
void _lcd_ubl_level_bed(); void _lcd_ubl_level_bed();
static int ubl_storage_slot = 0, static int16_t ubl_storage_slot = 0,
custom_bed_temp = 50, custom_bed_temp = 50,
custom_hotend_temp = 190, custom_hotend_temp = 190,
side_points = 3, side_points = 3,
@ -2672,7 +2672,7 @@ void kill_screen(const char* lcd_msg) {
// This assumes the center is 0,0 // This assumes the center is 0,0
#if ENABLED(DELTA) #if ENABLED(DELTA)
if (axis != Z_AXIS) { if (axis != Z_AXIS) {
max = sqrt(sq((float)(DELTA_PRINTABLE_RADIUS)) - sq(current_position[Y_AXIS - axis])); max = SQRT(sq((float)(DELTA_PRINTABLE_RADIUS)) - sq(current_position[Y_AXIS - axis]));
min = -max; min = -max;
} }
#endif #endif
@ -2920,14 +2920,14 @@ void kill_screen(const char* lcd_msg) {
#if ENABLED(PID_AUTOTUNE_MENU) #if ENABLED(PID_AUTOTUNE_MENU)
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
int autotune_temp[HOTENDS] = ARRAY_BY_HOTENDS1(150); int16_t autotune_temp[HOTENDS] = ARRAY_BY_HOTENDS1(150);
#endif #endif
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)
int autotune_temp_bed = 70; int16_t autotune_temp_bed = 70;
#endif #endif
void _lcd_autotune(int e) { void _lcd_autotune(int16_t e) {
char cmd[30]; char cmd[30];
sprintf_P(cmd, PSTR("M303 U1 E%i S%i"), e, sprintf_P(cmd, PSTR("M303 U1 E%i S%i"), e,
#if HAS_PID_FOR_BOTH #if HAS_PID_FOR_BOTH
@ -2947,14 +2947,14 @@ void kill_screen(const char* lcd_msg) {
// Helpers for editing PID Ki & Kd values // Helpers for editing PID Ki & Kd values
// grab the PID value out of the temp variable; scale it; then update the PID driver // grab the PID value out of the temp variable; scale it; then update the PID driver
void copy_and_scalePID_i(int e) { void copy_and_scalePID_i(int16_t e) {
#if DISABLED(PID_PARAMS_PER_HOTEND) || HOTENDS == 1 #if DISABLED(PID_PARAMS_PER_HOTEND) || HOTENDS == 1
UNUSED(e); UNUSED(e);
#endif #endif
PID_PARAM(Ki, e) = scalePID_i(raw_Ki); PID_PARAM(Ki, e) = scalePID_i(raw_Ki);
thermalManager.updatePID(); thermalManager.updatePID();
} }
void copy_and_scalePID_d(int e) { void copy_and_scalePID_d(int16_t e) {
#if DISABLED(PID_PARAMS_PER_HOTEND) || HOTENDS == 1 #if DISABLED(PID_PARAMS_PER_HOTEND) || HOTENDS == 1
UNUSED(e); UNUSED(e);
#endif #endif
@ -3523,7 +3523,7 @@ void kill_screen(const char* lcd_msg) {
STATIC_ITEM(MSG_INFO_PRINT_LONGEST ": ", false, false); // Longest job time: STATIC_ITEM(MSG_INFO_PRINT_LONGEST ": ", false, false); // Longest job time:
STATIC_ITEM("", false, false, buffer); // 99y 364d 23h 59m 59s STATIC_ITEM("", false, false, buffer); // 99y 364d 23h 59m 59s
sprintf_P(buffer, PSTR("%ld.%im"), long(stats.filamentUsed / 1000), int(stats.filamentUsed / 100) % 10); sprintf_P(buffer, PSTR("%ld.%im"), long(stats.filamentUsed / 1000), int16_t(stats.filamentUsed / 100) % 10);
STATIC_ITEM(MSG_INFO_PRINT_FILAMENT ": ", false, false); // Extruded total: STATIC_ITEM(MSG_INFO_PRINT_FILAMENT ": ", false, false); // Extruded total:
STATIC_ITEM("", false, false, buffer); // 125m STATIC_ITEM("", false, false, buffer); // 125m
END_SCREEN(); END_SCREEN();
@ -3926,14 +3926,14 @@ void kill_screen(const char* lcd_msg) {
* *
* The "DEFINE_MENU_EDIT_TYPE" macro generates the functions needed to edit a numerical value. * The "DEFINE_MENU_EDIT_TYPE" macro generates the functions needed to edit a numerical value.
* *
* For example, DEFINE_MENU_EDIT_TYPE(int, int3, itostr3, 1) expands into these functions: * For example, DEFINE_MENU_EDIT_TYPE(int16_t, int3, itostr3, 1) expands into these functions:
* *
* bool _menu_edit_int3(); * bool _menu_edit_int3();
* void menu_edit_int3(); // edit int (interactively) * void menu_edit_int3(); // edit int16_t (interactively)
* void menu_edit_callback_int3(); // edit int (interactively) with callback on completion * void menu_edit_callback_int3(); // edit int16_t (interactively) with callback on completion
* void _menu_action_setting_edit_int3(const char * const pstr, int * const ptr, const int minValue, const int maxValue); * void _menu_action_setting_edit_int3(const char * const pstr, int16_t * const ptr, const int16_t minValue, const int16_t maxValue);
* void menu_action_setting_edit_int3(const char * const pstr, int * const ptr, const int minValue, const int maxValue); * void menu_action_setting_edit_int3(const char * const pstr, int16_t * const ptr, const int16_t minValue, const int16_t maxValue);
* void menu_action_setting_edit_callback_int3(const char * const pstr, int * const ptr, const int minValue, const int maxValue, const screenFunc_t callback, const bool live); // edit int with callback * void menu_action_setting_edit_callback_int3(const char * const pstr, int16_t * const ptr, const int16_t minValue, const int16_t maxValue, const screenFunc_t callback, const bool live); // edit int16_t with callback
* *
* You can then use one of the menu macros to present the edit interface: * You can then use one of the menu macros to present the edit interface:
* MENU_ITEM_EDIT(int3, MSG_SPEED, &feedrate_percentage, 10, 999) * MENU_ITEM_EDIT(int3, MSG_SPEED, &feedrate_percentage, 10, 999)
@ -3984,7 +3984,7 @@ void kill_screen(const char* lcd_msg) {
} \ } \
typedef void _name typedef void _name
DEFINE_MENU_EDIT_TYPE(int, int3, itostr3, 1); DEFINE_MENU_EDIT_TYPE(int16_t, int3, itostr3, 1);
DEFINE_MENU_EDIT_TYPE(uint8_t, int8, i8tostr3, 1); DEFINE_MENU_EDIT_TYPE(uint8_t, int8, i8tostr3, 1);
DEFINE_MENU_EDIT_TYPE(float, float3, ftostr3, 1.0); DEFINE_MENU_EDIT_TYPE(float, float3, ftostr3, 1.0);
DEFINE_MENU_EDIT_TYPE(float, float32, ftostr32, 100.0); DEFINE_MENU_EDIT_TYPE(float, float32, ftostr32, 100.0);
@ -3993,7 +3993,7 @@ void kill_screen(const char* lcd_msg) {
DEFINE_MENU_EDIT_TYPE(float, float51, ftostr51sign, 10.0); DEFINE_MENU_EDIT_TYPE(float, float51, ftostr51sign, 10.0);
DEFINE_MENU_EDIT_TYPE(float, float52, ftostr52sign, 100.0); DEFINE_MENU_EDIT_TYPE(float, float52, ftostr52sign, 100.0);
DEFINE_MENU_EDIT_TYPE(float, float62, ftostr62rj, 100.0); DEFINE_MENU_EDIT_TYPE(float, float62, ftostr62rj, 100.0);
DEFINE_MENU_EDIT_TYPE(unsigned long, long5, ftostr5rj, 0.01); DEFINE_MENU_EDIT_TYPE(uint32_t, long5, ftostr5rj, 0.01);
/** /**
* *
@ -4001,7 +4001,7 @@ void kill_screen(const char* lcd_msg) {
* *
*/ */
#if ENABLED(REPRAPWORLD_KEYPAD) #if ENABLED(REPRAPWORLD_KEYPAD)
void _reprapworld_keypad_move(AxisEnum axis, int dir) { void _reprapworld_keypad_move(AxisEnum axis, int16_t dir) {
move_menu_scale = REPRAPWORLD_KEYPAD_MOVE_STEP; move_menu_scale = REPRAPWORLD_KEYPAD_MOVE_STEP;
encoderPosition = dir; encoderPosition = dir;
switch (axis) { switch (axis) {
@ -4160,8 +4160,8 @@ void lcd_init() {
#endif #endif
} }
int lcd_strlen(const char* s) { int16_t lcd_strlen(const char* s) {
int i = 0, j = 0; int16_t i = 0, j = 0;
while (s[i]) { while (s[i]) {
if (PRINTABLE(s[i])) j++; if (PRINTABLE(s[i])) j++;
i++; i++;
@ -4169,8 +4169,8 @@ int lcd_strlen(const char* s) {
return j; return j;
} }
int lcd_strlen_P(const char* s) { int16_t lcd_strlen_P(const char* s) {
int j = 0; int16_t j = 0;
while (pgm_read_byte(s)) { while (pgm_read_byte(s)) {
if (PRINTABLE(pgm_read_byte(s))) j++; if (PRINTABLE(pgm_read_byte(s))) j++;
s++; s++;

6
Marlin/ultralcd.h
View File

@ -30,10 +30,10 @@
#define BUTTON_EXISTS(BN) (defined(BTN_## BN) && BTN_## BN >= 0) #define BUTTON_EXISTS(BN) (defined(BTN_## BN) && BTN_## BN >= 0)
#define BUTTON_PRESSED(BN) !READ(BTN_## BN) #define BUTTON_PRESSED(BN) !READ(BTN_## BN)
extern int lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2], lcd_preheat_fan_speed[2]; extern int16_t lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2], lcd_preheat_fan_speed[2];
int lcd_strlen(const char* s); int16_t lcd_strlen(const char* s);
int lcd_strlen_P(const char* s); int16_t lcd_strlen_P(const char* s);
void lcd_update(); void lcd_update();
void lcd_init(); void lcd_init();
bool lcd_hasstatus(); bool lcd_hasstatus();

10
Marlin/ultralcd_impl_DOGM.h
View File

@ -346,7 +346,7 @@ void lcd_implementation_clear() { } // Automatically cleared by Picture Loop
// Status Screen // Status Screen
// //
FORCE_INLINE void _draw_centered_temp(const int temp, const uint8_t x, const uint8_t y) { FORCE_INLINE void _draw_centered_temp(const int16_t temp, const uint8_t x, const uint8_t y) {
const uint8_t degsize = 6 * (temp >= 100 ? 3 : temp >= 10 ? 2 : 1); // number's pixel width const uint8_t degsize = 6 * (temp >= 100 ? 3 : temp >= 10 ? 2 : 1); // number's pixel width
u8g.setPrintPos(x - (18 - degsize) / 2, y); // move left if shorter u8g.setPrintPos(x - (18 - degsize) / 2, y); // move left if shorter
lcd_print(itostr3(temp)); lcd_print(itostr3(temp));
@ -484,7 +484,7 @@ static void lcd_implementation_status_screen() {
#if HAS_FAN0 #if HAS_FAN0
if (PAGE_CONTAINS(20, 27)) { if (PAGE_CONTAINS(20, 27)) {
// Fan // Fan
const int per = ((fanSpeeds[0] + 1) * 100) / 256; const int16_t per = ((fanSpeeds[0] + 1) * 100) / 256;
if (per) { if (per) {
u8g.setPrintPos(104, 27); u8g.setPrintPos(104, 27);
lcd_print(itostr3(per)); lcd_print(itostr3(per));
@ -533,7 +533,7 @@ static void lcd_implementation_status_screen() {
if (PAGE_CONTAINS(50, 51 - (TALL_FONT_CORRECTION))) // 50-51 (or just 50) if (PAGE_CONTAINS(50, 51 - (TALL_FONT_CORRECTION))) // 50-51 (or just 50)
u8g.drawBox( u8g.drawBox(
PROGRESS_BAR_X + 1, 50, PROGRESS_BAR_X + 1, 50,
(unsigned int)((PROGRESS_BAR_WIDTH - 2) * card.percentDone() * 0.01), 2 - (TALL_FONT_CORRECTION) (uint16_t)((PROGRESS_BAR_WIDTH - 2) * card.percentDone() * 0.01), 2 - (TALL_FONT_CORRECTION)
); );
// //
@ -847,7 +847,7 @@ static void lcd_implementation_status_screen() {
} \ } \
typedef void _name##_void typedef void _name##_void
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(int, int3, itostr3); DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(int16_t, int3, itostr3);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(uint8_t, int8, i8tostr3); DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(uint8_t, int8, i8tostr3);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float3, ftostr3); DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float3, ftostr3);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float32, ftostr32); DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float32, ftostr32);
@ -856,7 +856,7 @@ static void lcd_implementation_status_screen() {
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float51, ftostr51sign); DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float51, ftostr51sign);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float52, ftostr52sign); DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float52, ftostr52sign);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float62, ftostr62rj); DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float62, ftostr62rj);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(unsigned long, long5, ftostr5rj); DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(uint32_t, long5, ftostr5rj);
#define lcd_implementation_drawmenu_setting_edit_bool(sel, row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF)) #define lcd_implementation_drawmenu_setting_edit_bool(sel, row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
#define lcd_implementation_drawmenu_setting_edit_callback_bool(sel, row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF)) #define lcd_implementation_drawmenu_setting_edit_callback_bool(sel, row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))

18
Marlin/ultralcd_impl_HD44780.h
View File

@ -337,7 +337,7 @@ static void lcd_set_custom_characters(
if (info_screen_charset != char_mode) { if (info_screen_charset != char_mode) {
char_mode = info_screen_charset; char_mode = info_screen_charset;
if (info_screen_charset) { // Progress bar characters for info screen if (info_screen_charset) { // Progress bar characters for info screen
for (int i = 3; i--;) createChar_P(LCD_STR_PROGRESS[i], progress[i]); for (int16_t i = 3; i--;) createChar_P(LCD_STR_PROGRESS[i], progress[i]);
} }
else { // Custom characters for submenus else { // Custom characters for submenus
createChar_P(LCD_UPLEVEL_CHAR, uplevel); createChar_P(LCD_UPLEVEL_CHAR, uplevel);
@ -414,17 +414,17 @@ void lcd_printPGM_utf(const char *str, uint8_t n=LCD_WIDTH) {
#if ENABLED(SHOW_BOOTSCREEN) #if ENABLED(SHOW_BOOTSCREEN)
void lcd_erase_line(const int line) { void lcd_erase_line(const int16_t line) {
lcd.setCursor(0, line); lcd.setCursor(0, line);
for (uint8_t i = LCD_WIDTH + 1; --i;) for (uint8_t i = LCD_WIDTH + 1; --i;)
lcd.print(' '); lcd.print(' ');
} }
// Scroll the PSTR 'text' in a 'len' wide field for 'time' milliseconds at position col,line // Scroll the PSTR 'text' in a 'len' wide field for 'time' milliseconds at position col,line
void lcd_scroll(const int col, const int line, const char* const text, const int len, const int time) { void lcd_scroll(const int16_t col, const int16_t line, const char* const text, const int16_t len, const int16_t time) {
char tmp[LCD_WIDTH + 1] = {0}; char tmp[LCD_WIDTH + 1] = {0};
int n = max(lcd_strlen_P(text) - len, 0); int16_t n = max(lcd_strlen_P(text) - len, 0);
for (int i = 0; i <= n; i++) { for (int16_t i = 0; i <= n; i++) {
strncpy_P(tmp, text + i, min(len, LCD_WIDTH)); strncpy_P(tmp, text + i, min(len, LCD_WIDTH));
lcd.setCursor(col, line); lcd.setCursor(col, line);
lcd_print(tmp); lcd_print(tmp);
@ -433,7 +433,7 @@ void lcd_printPGM_utf(const char *str, uint8_t n=LCD_WIDTH) {
} }
static void logo_lines(const char* const extra) { static void logo_lines(const char* const extra) {
int indent = (LCD_WIDTH - 8 - lcd_strlen_P(extra)) / 2; int16_t indent = (LCD_WIDTH - 8 - lcd_strlen_P(extra)) / 2;
lcd.setCursor(indent, 0); lcd.print('\x00'); lcd_printPGM(PSTR( "------" )); lcd.print('\x01'); lcd.setCursor(indent, 0); lcd.print('\x00'); lcd_printPGM(PSTR( "------" )); lcd.print('\x01');
lcd.setCursor(indent, 1); lcd_printPGM(PSTR("|Marlin|")); lcd_printPGM(extra); lcd.setCursor(indent, 1); lcd_printPGM(PSTR("|Marlin|")); lcd_printPGM(extra);
lcd.setCursor(indent, 2); lcd.print('\x02'); lcd_printPGM(PSTR( "------" )); lcd.print('\x03'); lcd.setCursor(indent, 2); lcd.print('\x02'); lcd_printPGM(PSTR( "------" )); lcd.print('\x03');
@ -628,7 +628,7 @@ FORCE_INLINE void _draw_heater_status(const int8_t heater, const char prefix, co
#if ENABLED(LCD_PROGRESS_BAR) #if ENABLED(LCD_PROGRESS_BAR)
inline void lcd_draw_progress_bar(const uint8_t percent) { inline void lcd_draw_progress_bar(const uint8_t percent) {
const int tix = (int)(percent * (LCD_WIDTH) * 3) / 100, const int16_t tix = (int16_t)(percent * (LCD_WIDTH) * 3) / 100,
cel = tix / 3, cel = tix / 3,
rem = tix % 3; rem = tix % 3;
uint8_t i = LCD_WIDTH; uint8_t i = LCD_WIDTH;
@ -958,7 +958,7 @@ static void lcd_implementation_status_screen() {
} \ } \
typedef void _name##_void typedef void _name##_void
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(int, int3, itostr3); DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(int16_t, int3, itostr3);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(uint8_t, int8, i8tostr3); DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(uint8_t, int8, i8tostr3);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float3, ftostr3); DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float3, ftostr3);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float32, ftostr32); DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float32, ftostr32);
@ -967,7 +967,7 @@ static void lcd_implementation_status_screen() {
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float51, ftostr51sign); DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float51, ftostr51sign);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float52, ftostr52sign); DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float52, ftostr52sign);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float62, ftostr62rj); DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float62, ftostr62rj);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(unsigned long, long5, ftostr5rj); DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(uint32_t, long5, ftostr5rj);
#define lcd_implementation_drawmenu_setting_edit_bool(sel, row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF)) #define lcd_implementation_drawmenu_setting_edit_bool(sel, row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
#define lcd_implementation_drawmenu_setting_edit_callback_bool(sel, row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF)) #define lcd_implementation_drawmenu_setting_edit_callback_bool(sel, row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))

2
Marlin/vector_3.cpp
View File

@ -63,7 +63,7 @@ vector_3 vector_3::get_normal() {
return normalized; return normalized;
} }
float vector_3::get_length() { return sqrt(sq(x) + sq(y) + sq(z)); } float vector_3::get_length() { return SQRT(sq(x) + sq(y) + sq(z)); }
void vector_3::normalize() { void vector_3::normalize() {
const float inv_length = 1.0 / get_length(); const float inv_length = 1.0 / get_length();