Zonestar Z8 XM2 support (#19991)

This commit is contained in:
Albert van Osch 2020-11-07 23:59:19 +01:00 committed by Scott Lahteine
parent dfb6dd2ad2
commit 4052ef7097
7 changed files with 272 additions and 48 deletions

View File

@ -69,49 +69,50 @@
#define BOARD_MKS_GEN_L 1113 // MKS GEN L #define BOARD_MKS_GEN_L 1113 // MKS GEN L
#define BOARD_KFB_2 1114 // BigTreeTech or BIQU KFB2.0 #define BOARD_KFB_2 1114 // BigTreeTech or BIQU KFB2.0
#define BOARD_ZRIB_V20 1115 // zrib V2.0 control board (Chinese knock off RAMPS replica) #define BOARD_ZRIB_V20 1115 // zrib V2.0 control board (Chinese knock off RAMPS replica)
#define BOARD_FELIX2 1116 // Felix 2.0+ Electronics Board (RAMPS like) #define BOARD_ZRIB_V52 1116 // zrib V5.2 control board (Chinese knock off RAMPS replica)
#define BOARD_RIGIDBOARD 1117 // Invent-A-Part RigidBoard #define BOARD_FELIX2 1117 // Felix 2.0+ Electronics Board (RAMPS like)
#define BOARD_RIGIDBOARD_V2 1118 // Invent-A-Part RigidBoard V2 #define BOARD_RIGIDBOARD 1118 // Invent-A-Part RigidBoard
#define BOARD_SAINSMART_2IN1 1119 // Sainsmart 2-in-1 board #define BOARD_RIGIDBOARD_V2 1119 // Invent-A-Part RigidBoard V2
#define BOARD_ULTIMAKER 1120 // Ultimaker #define BOARD_SAINSMART_2IN1 1120 // Sainsmart 2-in-1 board
#define BOARD_ULTIMAKER_OLD 1121 // Ultimaker (Older electronics. Pre 1.5.4. This is rare) #define BOARD_ULTIMAKER 1121 // Ultimaker
#define BOARD_AZTEEG_X3 1122 // Azteeg X3 #define BOARD_ULTIMAKER_OLD 1122 // Ultimaker (Older electronics. Pre 1.5.4. This is rare)
#define BOARD_AZTEEG_X3_PRO 1123 // Azteeg X3 Pro #define BOARD_AZTEEG_X3 1123 // Azteeg X3
#define BOARD_ULTIMAIN_2 1124 // Ultimainboard 2.x (Uses TEMP_SENSOR 20) #define BOARD_AZTEEG_X3_PRO 1124 // Azteeg X3 Pro
#define BOARD_RUMBA 1125 // Rumba #define BOARD_ULTIMAIN_2 1125 // Ultimainboard 2.x (Uses TEMP_SENSOR 20)
#define BOARD_RUMBA_RAISE3D 1126 // Raise3D N series Rumba derivative #define BOARD_RUMBA 1126 // Rumba
#define BOARD_RL200 1127 // Rapide Lite 200 (v1, low-cost RUMBA clone with drv) #define BOARD_RUMBA_RAISE3D 1127 // Raise3D N series Rumba derivative
#define BOARD_FORMBOT_TREX2PLUS 1128 // Formbot T-Rex 2 Plus #define BOARD_RL200 1128 // Rapide Lite 200 (v1, low-cost RUMBA clone with drv)
#define BOARD_FORMBOT_TREX3 1129 // Formbot T-Rex 3 #define BOARD_FORMBOT_TREX2PLUS 1129 // Formbot T-Rex 2 Plus
#define BOARD_FORMBOT_RAPTOR 1130 // Formbot Raptor #define BOARD_FORMBOT_TREX3 1130 // Formbot T-Rex 3
#define BOARD_FORMBOT_RAPTOR2 1131 // Formbot Raptor 2 #define BOARD_FORMBOT_RAPTOR 1131 // Formbot Raptor
#define BOARD_BQ_ZUM_MEGA_3D 1132 // bq ZUM Mega 3D #define BOARD_FORMBOT_RAPTOR2 1132 // Formbot Raptor 2
#define BOARD_MAKEBOARD_MINI 1133 // MakeBoard Mini v2.1.2 is a control board sold by MicroMake #define BOARD_BQ_ZUM_MEGA_3D 1133 // bq ZUM Mega 3D
#define BOARD_TRIGORILLA_13 1134 // TriGorilla Anycubic version 1.3-based on RAMPS EFB #define BOARD_MAKEBOARD_MINI 1134 // MakeBoard Mini v2.1.2 is a control board sold by MicroMake
#define BOARD_TRIGORILLA_14 1135 // ... Ver 1.4 #define BOARD_TRIGORILLA_13 1135 // TriGorilla Anycubic version 1.3-based on RAMPS EFB
#define BOARD_TRIGORILLA_14_11 1136 // ... Rev 1.1 (new servo pin order) #define BOARD_TRIGORILLA_14 1136 // ... Ver 1.4
#define BOARD_RAMPS_ENDER_4 1137 // Creality: Ender-4, CR-8 #define BOARD_TRIGORILLA_14_11 1137 // ... Rev 1.1 (new servo pin order)
#define BOARD_RAMPS_CREALITY 1138 // Creality: CR10S, CR20, CR-X #define BOARD_RAMPS_ENDER_4 1138 // Creality: Ender-4, CR-8
#define BOARD_DAGOMA_F5 1139 // Dagoma F5 #define BOARD_RAMPS_CREALITY 1139 // Creality: CR10S, CR20, CR-X
#define BOARD_FYSETC_F6_13 1140 // FYSETC F6 1.3 #define BOARD_DAGOMA_F5 1140 // Dagoma F5
#define BOARD_FYSETC_F6_14 1141 // FYSETC F6 1.4 #define BOARD_FYSETC_F6_13 1141 // FYSETC F6 1.3
#define BOARD_DUPLICATOR_I3_PLUS 1142 // Wanhao Duplicator i3 Plus #define BOARD_FYSETC_F6_14 1142 // FYSETC F6 1.4
#define BOARD_VORON 1143 // VORON Design #define BOARD_DUPLICATOR_I3_PLUS 1143 // Wanhao Duplicator i3 Plus
#define BOARD_TRONXY_V3_1_0 1144 // Tronxy TRONXY-V3-1.0 #define BOARD_VORON 1144 // VORON Design
#define BOARD_Z_BOLT_X_SERIES 1145 // Z-Bolt X Series #define BOARD_TRONXY_V3_1_0 1145 // Tronxy TRONXY-V3-1.0
#define BOARD_TT_OSCAR 1146 // TT OSCAR #define BOARD_Z_BOLT_X_SERIES 1146 // Z-Bolt X Series
#define BOARD_OVERLORD 1147 // Overlord/Overlord Pro #define BOARD_TT_OSCAR 1147 // TT OSCAR
#define BOARD_HJC2560C_REV1 1148 // ADIMLab Gantry v1 #define BOARD_OVERLORD 1148 // Overlord/Overlord Pro
#define BOARD_HJC2560C_REV2 1149 // ADIMLab Gantry v2 #define BOARD_HJC2560C_REV1 1149 // ADIMLab Gantry v1
#define BOARD_TANGO 1150 // BIQU Tango V1 #define BOARD_HJC2560C_REV2 1150 // ADIMLab Gantry v2
#define BOARD_MKS_GEN_L_V2 1151 // MKS GEN L V2 #define BOARD_TANGO 1151 // BIQU Tango V1
#define BOARD_MKS_GEN_L_V21 1152 // MKS GEN L V2.1 #define BOARD_MKS_GEN_L_V2 1152 // MKS GEN L V2
#define BOARD_COPYMASTER_3D 1153 // Copymaster 3D #define BOARD_MKS_GEN_L_V21 1153 // MKS GEN L V2.1
#define BOARD_ORTUR_4 1154 // Ortur 4 #define BOARD_COPYMASTER_3D 1154 // Copymaster 3D
#define BOARD_TENLOG_D3_HERO 1155 // Tenlog D3 Hero IDEX printer #define BOARD_ORTUR_4 1155 // Ortur 4
#define BOARD_RAMPS_S_12_EEFB 1156 // Ramps S 1.2 by Sakul.cz (Power outputs: Hotend0, Hotend1, Fan, Bed) #define BOARD_TENLOG_D3_HERO 1156 // Tenlog D3 Hero IDEX printer
#define BOARD_RAMPS_S_12_EEEB 1157 // Ramps S 1.2 by Sakul.cz (Power outputs: Hotend0, Hotend1, Hotend2, Bed) #define BOARD_RAMPS_S_12_EEFB 1157 // Ramps S 1.2 by Sakul.cz (Power outputs: Hotend0, Hotend1, Fan, Bed)
#define BOARD_RAMPS_S_12_EFFB 1158 // Ramps S 1.2 by Sakul.cz (Power outputs: Hotend, Fan0, Fan1, Bed) #define BOARD_RAMPS_S_12_EEEB 1158 // Ramps S 1.2 by Sakul.cz (Power outputs: Hotend0, Hotend1, Hotend2, Bed)
#define BOARD_RAMPS_S_12_EFFB 1159 // Ramps S 1.2 by Sakul.cz (Power outputs: Hotend, Fan0, Fan1, Bed)
// //
// RAMBo and derivatives // RAMBo and derivatives

View File

@ -16,7 +16,7 @@
* GNU General Public License for more details. * GNU General Public License for more details.
* *
* You should have received a copy of the GNU General Public License * You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <https://www.gnu.org/licenses/>.
* *
*/ */

View File

@ -68,6 +68,8 @@
#define THERMISTOR_NAME "Zonestar (Tronxy X3A)" #define THERMISTOR_NAME "Zonestar (Tronxy X3A)"
#elif THERMISTOR_ID == 502 #elif THERMISTOR_ID == 502
#define THERMISTOR_NAME "Zonestar (P802M Hot Bed)" #define THERMISTOR_NAME "Zonestar (P802M Hot Bed)"
#elif THERMISTOR_ID == 503
#define THERMISTOR_NAME "Zonestar (Z8XM2 Bed)"
#elif THERMISTOR_ID == 512 #elif THERMISTOR_ID == 512
#define THERMISTOR_NAME "RPW-Ultra" #define THERMISTOR_NAME "RPW-Ultra"
#elif THERMISTOR_ID == 6 #elif THERMISTOR_ID == 6

View File

@ -0,0 +1,57 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
// Zonestar (Z8XM2) Heated Bed thermistor. Added By AvanOsch
// These are taken from the Zonestar settings in original Repetier firmware: Z8XM2_ZRIB_LCD12864_V51.zip
const temp_entry_t temptable_503[] PROGMEM = {
{ OV( 12), 300 },
{ OV( 27), 270 },
{ OV( 47), 250 },
{ OV( 68), 230 },
{ OV( 99), 210 },
{ OV( 120), 200 },
{ OV( 141), 190 },
{ OV( 171), 180 },
{ OV( 201), 170 },
{ OV( 261), 160 },
{ OV( 321), 150 },
{ OV( 401), 140 },
{ OV( 451), 130 },
{ OV( 551), 120 },
{ OV( 596), 110 },
{ OV( 626), 105 },
{ OV( 666), 100 },
{ OV( 697), 90 },
{ OV( 717), 85 },
{ OV( 798), 69 },
{ OV( 819), 65 },
{ OV( 870), 55 },
{ OV( 891), 51 },
{ OV( 922), 39 },
{ OV( 968), 28 },
{ OV( 980), 23 },
{ OV( 991), 17 },
{ OV( 1001), 9 },
{ OV(1021), -27 },
{ OV(1023), -200}
};

View File

@ -75,6 +75,9 @@ typedef struct { int16_t value, celsius; } temp_entry_t;
#if ANY_THERMISTOR_IS(502) // Unknown thermistor used by the Zonestar Průša P802M hot bed #if ANY_THERMISTOR_IS(502) // Unknown thermistor used by the Zonestar Průša P802M hot bed
#include "thermistor_502.h" #include "thermistor_502.h"
#endif #endif
#if ANY_THERMISTOR_IS(503) // Zonestar (Z8XM2) Heated Bed thermistor
#include "thermistor_503.h"
#endif
#if ANY_THERMISTOR_IS(512) // 100k thermistor in RPW-Ultra hotend, Pull-up = 4.7 kOhm, "unknown model" #if ANY_THERMISTOR_IS(512) // 100k thermistor in RPW-Ultra hotend, Pull-up = 4.7 kOhm, "unknown model"
#include "thermistor_512.h" #include "thermistor_512.h"
#endif #endif

View File

@ -104,13 +104,13 @@
#elif MB(3DRAG) #elif MB(3DRAG)
#include "ramps/pins_3DRAG.h" // ATmega1280, ATmega2560 env:mega1280 env:mega2560 #include "ramps/pins_3DRAG.h" // ATmega1280, ATmega2560 env:mega1280 env:mega2560
#elif MB(K8200) #elif MB(K8200)
#include "ramps/pins_K8200.h" // ATmega1280, ATmega2560 env:mega1280 env:mega2560 (3DRAG) #include "ramps/pins_K8200.h" // ATmega1280, ATmega2560 env:mega1280 env:mega2560
#elif MB(K8400) #elif MB(K8400)
#include "ramps/pins_K8400.h" // ATmega1280, ATmega2560 env:mega1280 env:mega2560 (3DRAG) #include "ramps/pins_K8400.h" // ATmega1280, ATmega2560 env:mega1280 env:mega2560
#elif MB(K8600) #elif MB(K8600)
#include "ramps/pins_K8600.h" // ATmega1280, ATmega2560 env:mega1280 env:mega2560 #include "ramps/pins_K8600.h" // ATmega1280, ATmega2560 env:mega1280 env:mega2560
#elif MB(K8800) #elif MB(K8800)
#include "ramps/pins_K8800.h" // ATmega1280, ATmega2560 env:mega1280 env:mega2560 (3DRAG) #include "ramps/pins_K8800.h" // ATmega1280, ATmega2560 env:mega1280 env:mega2560
#elif MB(BAM_DICE) #elif MB(BAM_DICE)
#include "ramps/pins_RAMPS.h" // ATmega1280, ATmega2560 env:mega1280 env:mega2560 #include "ramps/pins_RAMPS.h" // ATmega1280, ATmega2560 env:mega1280 env:mega2560
#elif MB(BAM_DICE_DUE) #elif MB(BAM_DICE_DUE)
@ -132,7 +132,9 @@
#elif MB(KFB_2) #elif MB(KFB_2)
#include "ramps/pins_BIQU_KFB_2.h" // ATmega2560 env:mega2560 #include "ramps/pins_BIQU_KFB_2.h" // ATmega2560 env:mega2560
#elif MB(ZRIB_V20) #elif MB(ZRIB_V20)
#include "ramps/pins_ZRIB_V20.h" // ATmega1280, ATmega2560 env:mega1280 env:mega2560 (MKS_GEN_13) #include "ramps/pins_ZRIB_V20.h" // ATmega1280, ATmega2560 env:mega1280 env:mega2560
#elif MB(ZRIB_V52)
#include "ramps/pins_ZRIB_V52.h" // ATmega1280, ATmega2560 env:mega1280 env:mega2560
#elif MB(FELIX2) #elif MB(FELIX2)
#include "ramps/pins_FELIX2.h" // ATmega1280, ATmega2560 env:mega1280 env:mega2560 #include "ramps/pins_FELIX2.h" // ATmega1280, ATmega2560 env:mega1280 env:mega2560
#elif MB(RIGIDBOARD) #elif MB(RIGIDBOARD)

View File

@ -0,0 +1,159 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* ZRIB V5.2 Based on MKS BASE v1.4 with A4982 stepper drivers and digital micro-stepping
*/
#if HOTENDS > 2 || E_STEPPERS > 2
#error "ZRIB V5.2 only supports up to 2 hotends / E-steppers. Comment out this line to continue."
#endif
#define BOARD_INFO_NAME "ZRIB V5.2"
#define MKS_BASE_VERSION 14
#define IS_RAMPS_EFB
//
// Heaters / Fans
//
#define FAN_PIN 9 // PH6 ** Pin18 ** PWM9
#define FAN1_PIN 6
//
// Extra Extruder / Stepper for V5.2
//
#define E2_STEP_PIN 4
#define E2_DIR_PIN 5
#define E2_ENABLE_PIN 22
#include "pins_MKS_BASE_common.h"
/*
Available connectors on MKS BASE v1.4 (Basically same as ZRIB V5.2)
=======
| GND |
|-----| E0
| 10 | (10) PB4 ** Pin23 ** PWM10
|-----|
| GND |
|-----| E1
| 7 | ( 7) PH4 ** Pin16 ** PWM7
|-----|
| GND |
|-----| FAN
| 9 | ( 9) PH6 ** Pin18 ** PWM9
=======
=======
| GND |
|-----| Heated Bed
| 8 | ( 8) PH5 ** Pin17 ** PWM8
=======
==========
| 12-24V |
|--------| Power
| GND |
==========
XS3 Connector
=================
| 65 | GND | 5V | (65) PK3 ** Pin86 ** A11
|----|-----|----|
| 66 | GND | 5V | (66) PK4 ** Pin85 ** A12
=================
Servos Connector
=================
| 11 | GND | 5V | (11) PB5 ** Pin24 ** PWM11
|----|-----|----|
| 12 | GND | 5V | (12) PB6 ** Pin25 ** PWM12
=================
ICSP
=================
| 5V | 51 | GND | (51) PB2 ** Pin21 ** SPI_MOSI
|----|----|-----|
| 50 | 52 | RST | (50) PB3 ** Pin22 ** SPI_MISO
================= (52) PB1 ** Pin20 ** SPI_SCK
XS6/AUX-1 Connector
======================
| 5V | GND | NC | 20 | (20) PD1 ** Pin44 ** I2C_SDA
|----|-----|----|----|
| 50 | 51 | 52 | 21 | (50) PB3 ** Pin22 ** SPI_MISO
====================== (51) PB2 ** Pin21 ** SPI_MOSI
(52) PB1 ** Pin20 ** SPI_SCK
(21) PD0 ** Pin43 ** I2C_SCL
Temperature
==================================
| GND | 69 | GND | 68 | GND | 67 |
==================================
(69) PK7 ** Pin82 ** A15
(68) PK6 ** Pin83 ** A14
(67) PK5 ** Pin84 ** A13
Limit Switches
============
| 2 | GND | X+ ( 2) PE4 ** Pin6 ** PWM2
|----|-----|
| 3 | GND | X- ( 3) PE5 ** Pin7 ** PWM3
|----|-----|
| 15 | GND | Y+ (15) PJ0 ** Pin63 ** USART3_RX
|----|-----|
| 14 | GND | Y- (14) PJ1 ** Pin64 ** USART3_TX
|----|-----|
| 19 | GND | Z+ (19) PD2 ** Pin45 ** USART1_RX
|----|-----|
| 18 | GND | Z- (18) PD3 ** Pin46 ** USART1_TX
============
EXP1
============
| 37 | 35 | (37) PC0 ** Pin53 ** D37
|-----|----| (35) PC2 ** Pin55 ** D35
| 17 | 16 | (17) PH0 ** Pin12 ** USART2_RX
|-----|----| (16) PH1 ** Pin13 ** USART2_TX
| 23 | 25 | (23) PA1 ** Pin77 ** D23
|-----|----| (25) PA3 ** Pin75 ** D25
| 27 | 29 | (27) PA5 ** Pin73 ** D27
|-----|----| (29) PA7 ** Pin71 ** D29
| GND | 5V |
============
EXP2
============
| 50 | 52 | (50) PB3 ** Pin22 ** SPI_MISO
|-----|----| (52) PB1 ** Pin20 ** SPI_SCK
| 31 | 53 | (31) PC6 ** Pin59 ** D31
|-----|----| (53) PB0 ** Pin19 ** SPI_SS
| 33 | 51 | (33) PC4 ** Pin57 ** D33
|-----|----| (51) PB2 ** Pin21 ** SPI_MOSI
| 49 | 41 | (49) PL0 ** Pin35 ** D49
|-----|----| (41) PG0 ** Pin51 ** D41
| GND | NC |
============
*/