bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

🎨 Laser Ammeter followup (#22079)

Browse Source 
Followup to #21835
This commit is contained in:
Scott Lahteine
2021-06-08 07:51:28 -05:00
committed by Scott Lahteine
parent 2fd9971f41
commit 3f103c91f0
13 changed files with 90 additions and 116 deletions
Download Patch File Download Diff File Expand all files Collapse all files

21
Marlin/Configuration_adv.h
View File

@@ -3283,15 +3283,6 @@
//#define AIR_ASSIST_PIN 44 // Override the default Air Assist pin
#endif
//
// Laser I2C Ammeter (High precision INA226 low/high side module)
//
//#define I2C_AMMETER
#if ENABLED(I2C_AMMETER)
#define I2C_AMMETER_IMAX .1 // Calibration value for the expected current range in Amps (use float e.g. 1.0)
#define I2C_AMMETER_SHUNT_RESISTOR .1 // Calibration shunt resistor value in ohms
#endif
//#define SPINDLE_SERVO // A servo converting an angle to spindle power
#ifdef SPINDLE_SERVO
#define SPINDLE_SERVO_NR 0 // Index of servo used for spindle control
@@ -3424,8 +3415,18 @@
#define SPINDLE_LASER_POWERDOWN_DELAY 50 // (ms) Delay to allow the spindle to stop
#endif
//
// Laser I2C Ammeter (High precision INA226 low/high side module)
//
//#define I2C_AMMETER
#if ENABLED(I2C_AMMETER)
#define I2C_AMMETER_IMAX 0.1 // (Amps) Calibration value for the expected current range
#define I2C_AMMETER_SHUNT_RESISTOR 0.1 // (Ohms) Calibration shunt resistor value
#endif
#endif
#endif
#endif // SPINDLE_FEATURE || LASER_FEATURE
/**
* Synchronous Laser Control with M106/M107