Implementation of FW extruder change retract
FW retraction is extended onto swap retraction invoked by 'G10 S1'. Bookkeeping of the retract state of all extruders allows for having one extruder fw standard retracted while another extruder is swap retracted. An LCD menu item for the swap retract and recover length was added.
This commit is contained in:
Dim3nsioneer
@@ -171,9 +171,11 @@
|
||||
#define MSG_KILLED "KILLED. "
|
||||
#define MSG_STOPPED "STOPPED. "
|
||||
#define MSG_CONTROL_RETRACT "Retract mm"
|
||||
#define MSG_CONTROL_RETRACT_SWAP "Swap Re.mm"
|
||||
#define MSG_CONTROL_RETRACTF "Retract V"
|
||||
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "S UnRet+mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
|
||||
#define MSG_AUTORETRACT "AutoRetr."
|
||||
#define MSG_FILAMENTCHANGE "Change filament"
|
||||
@@ -371,9 +373,11 @@
|
||||
#define MSG_STOPPED "Zatrzymany. "
|
||||
#define MSG_STEPPER_RELEASED "Zwolniony."
|
||||
#define MSG_CONTROL_RETRACT "Wycofaj mm"
|
||||
#define MSG_CONTROL_RETRACT_SWAP "Z Wycof. mm"
|
||||
#define MSG_CONTROL_RETRACTF "Wycofaj V"
|
||||
#define MSG_CONTROL_RETRACT_ZLIFT "Skok Z mm:"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER "Cof. wycof. +mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Z Cof. wyc. +mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVERF "Cof. wycof. V"
|
||||
#define MSG_AUTORETRACT "Auto. wycofanie"
|
||||
#define MSG_FILAMENTCHANGE "Zmien filament"
|
||||
@@ -572,9 +576,11 @@
|
||||
#define MSG_STOPPED "STOPPE."
|
||||
#define MSG_STEPPER_RELEASED "RELACHE."
|
||||
#define MSG_CONTROL_RETRACT "Retraction mm"
|
||||
#define MSG_CONTROL_RETRACT_SWAP "Ech. Retr. mm"
|
||||
#define MSG_CONTROL_RETRACTF "Retraction V"
|
||||
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Ech. UnRet +mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
|
||||
#define MSG_AUTORETRACT "Retract. Auto."
|
||||
#define MSG_FILAMENTCHANGE "Changer filament"
|
||||
@@ -774,9 +780,11 @@
|
||||
#define MSG_STOPPED "GESTOPPT"
|
||||
#define MSG_STEPPER_RELEASED "Stepper frei"
|
||||
#define MSG_CONTROL_RETRACT "Retract mm"
|
||||
#define MSG_CONTROL_RETRACT_SWAP "Wechs. Retract mm"
|
||||
#define MSG_CONTROL_RETRACTF "Retract V"
|
||||
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Wechs. UnRet +mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
|
||||
#define MSG_AUTORETRACT "AutoRetr."
|
||||
#define MSG_FILAMENTCHANGE "Filament wechseln"
|
||||
@@ -972,9 +980,11 @@
|
||||
#define MSG_KILLED "PARADA DE EMERG."
|
||||
#define MSG_STOPPED "PARADA"
|
||||
#define MSG_CONTROL_RETRACT "Retraer mm"
|
||||
#define MSG_CONTROL_RETRACT_SWAP "Interc. Retraer mm"
|
||||
#define MSG_CONTROL_RETRACTF "Retraer V"
|
||||
#define MSG_CONTROL_RETRACT_ZLIFT "Levantar mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER "DesRet +mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Interc. DesRet +mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVERF "DesRet V"
|
||||
#define MSG_AUTORETRACT "AutoRetr."
|
||||
#define MSG_FILAMENTCHANGE "Cambiar filamento"
|
||||
@@ -1179,9 +1189,11 @@
|
||||
#define MSG_KILLED "УБИТО."
|
||||
#define MSG_STOPPED "ОСТАНОВЛЕНО."
|
||||
#define MSG_CONTROL_RETRACT "Откат mm:"
|
||||
#define MSG_CONTROL_RETRACT_SWAP "своп Откат mm:"
|
||||
#define MSG_CONTROL_RETRACTF "Откат V:"
|
||||
#define MSG_CONTROL_RETRACT_ZLIFT "Прыжок mm:"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER "Возврат +mm:"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "своп Возврат +mm:"
|
||||
#define MSG_CONTROL_RETRACT_RECOVERF "Возврат V:"
|
||||
#define MSG_AUTORETRACT "АвтоОткат:"
|
||||
#define MSG_FILAMENTCHANGE "Change filament"
|
||||
@@ -1376,9 +1388,11 @@
|
||||
#define MSG_KILLED "UCCISO. "
|
||||
#define MSG_STOPPED "ARRESTATO. "
|
||||
#define MSG_CONTROL_RETRACT "Ritrai mm"
|
||||
#define MSG_CONTROL_RETRACT_SWAP "Scamb. Ritrai mm"
|
||||
#define MSG_CONTROL_RETRACTF "Ritrai V"
|
||||
#define MSG_CONTROL_RETRACT_ZLIFT "Salta mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Scamb. UnRet +mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
|
||||
#define MSG_AUTORETRACT "AutoArretramento"
|
||||
#define MSG_FILAMENTCHANGE "Cambia filamento"
|
||||
@@ -1581,9 +1595,11 @@
|
||||
#define MSG_STOPPED "PARADA. "
|
||||
#define MSG_STEPPER_RELEASED "Lancado."
|
||||
#define MSG_CONTROL_RETRACT " Retrair mm:"
|
||||
#define MSG_CONTROL_RETRACT_SWAP "Troca Retrair mm:"
|
||||
#define MSG_CONTROL_RETRACTF " Retrair V:"
|
||||
#define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Troca DesRet +mm:"
|
||||
#define MSG_CONTROL_RETRACT_RECOVERF " DesRet V:"
|
||||
#define MSG_AUTORETRACT " AutoRetr.:"
|
||||
#define MSG_FILAMENTCHANGE "Change filament"
|
||||
@@ -1781,9 +1797,11 @@
|
||||
#define MSG_KILLED "KILLED. "
|
||||
#define MSG_STOPPED "STOPPED. "
|
||||
#define MSG_CONTROL_RETRACT "Veda mm"
|
||||
#define MSG_CONTROL_RETRACT_SWAP "Va. Veda mm"
|
||||
#define MSG_CONTROL_RETRACTF "Veda V"
|
||||
#define MSG_CONTROL_RETRACT_ZLIFT "Z mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Va. UnRet +mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
|
||||
#define MSG_AUTORETRACT "AutoVeto."
|
||||
#define MSG_FILAMENTCHANGE "Change filament"
|
||||
@@ -1979,9 +1997,11 @@
|
||||
#define MSG_KILLED "ATURADA D'EMERCH."
|
||||
#define MSG_STOPPED "ATURADA."
|
||||
#define MSG_CONTROL_RETRACT "Retraer mm"
|
||||
#define MSG_CONTROL_RETRACT_SWAP "Swap Retraer mm"
|
||||
#define MSG_CONTROL_RETRACTF "Retraer F"
|
||||
#define MSG_CONTROL_RETRACT_ZLIFT "Devantar mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER "DesRet +mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Swap DesRet +mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVERF "DesRet F"
|
||||
#define MSG_AUTORETRACT "AutoRetr."
|
||||
#define MSG_FILAMENTCHANGE "Cambear"
|
||||
@@ -2185,9 +2205,11 @@
|
||||
#define MSG_KILLED "AFGEBROKEN. "
|
||||
#define MSG_STOPPED "GESTOPT. "
|
||||
#define MSG_CONTROL_RETRACT "Retract mm"
|
||||
#define MSG_CONTROL_RETRACT_SWAP "Ruil Retract mm"
|
||||
#define MSG_CONTROL_RETRACTF "Retract F"
|
||||
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Ruil UnRet +mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"
|
||||
#define MSG_AUTORETRACT "AutoRetr."
|
||||
#define MSG_FILAMENTCHANGE "Verv. Filament"
|
||||
@@ -2384,9 +2406,11 @@
|
||||
#define MSG_KILLED "PARADA DE EMERG. "
|
||||
#define MSG_STOPPED "ATURAT. "
|
||||
#define MSG_CONTROL_RETRACT "Retreure mm"
|
||||
#define MSG_CONTROL_RETRACT_SWAP "Swap Retreure mm"
|
||||
#define MSG_CONTROL_RETRACTF "Retreure F"
|
||||
#define MSG_CONTROL_RETRACT_ZLIFT "Aixecar mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER "DesRet +mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Swap DesRet +mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVERF "DesRet F"
|
||||
#define MSG_AUTORETRACT "AutoRetr."
|
||||
#define MSG_FILAMENTCHANGE "Canviar filament"
|
||||
@@ -2582,9 +2606,11 @@
|
||||
#define MSG_KILLED "LARRIALDI GELDIA"
|
||||
#define MSG_STOPPED "GELDITUTA. "
|
||||
#define MSG_CONTROL_RETRACT "Atzera egin mm"
|
||||
#define MSG_CONTROL_RETRACT_SWAP "Swap Atzera egin mm"
|
||||
#define MSG_CONTROL_RETRACTF "Atzera egin V"
|
||||
#define MSG_CONTROL_RETRACT_ZLIFT "Igo mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER "Atzera egin +mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Swap Atzera egin +mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVERF "Atzera egin V"
|
||||
#define MSG_AUTORETRACT "Atzera egin"
|
||||
#define MSG_FILAMENTCHANGE "Aldatu filament."
|
||||
|
||||
Reference in New Issue
Block a user