Support Black STM32F407VET6 with RAMPS-like shield (#13524)

buildroot/share/PlatformIO/variants/MARLIN_F407VE/variant.h

@@ -0,0 +1,219 @@
+/*
+ *******************************************************************************
+ * Copyright (c) 2017, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef _VARIANT_ARDUINO_STM32_
+#define _VARIANT_ARDUINO_STM32_
+
+/*----------------------------------------------------------------------------
+ *        Headers
+ *----------------------------------------------------------------------------*/
+#include "PeripheralPins.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif // __cplusplus
+
+/*----------------------------------------------------------------------------
+ *        Pins
+ *----------------------------------------------------------------------------*/
+extern const PinName digitalPin[];
+// Right Side
+#define PE1  0
+#define PE0  1
+#define PB9  2
+#define PB8  3
+#define PB7  4
+#define PB6  5
+#define PB5  6
+#define PB3  7
+#define PD7  8
+#define PD6  9
+#define PD5  10
+#define PD4  11
+#define PD3  12
+#define PD2  13
+#define PD1  14
+#define PD0  15
+#define PC12 16
+#define PC11 17
+#define PC10 18
+#define PA15 19
+#define PA12 20 // USB_DP
+#define PA11 21 // USB_DM
+#define PA10 22
+#define PA9  23
+#define PA8  24
+#define PC9  25
+#define PC8  26
+#define PC7  27
+#define PC6  28
+#define PD15 29
+#define PD14 30
+#define PD13 31
+#define PD12 32
+#define PD11 33
+#define PD10 34
+#define PD9  35
+#define PD8  36
+#define PB15 37
+// Left Side
+#define PE2  38
+#define PE3  39
+#define PE4  40 // BUT K0
+#define PE5  41 // BUT K1
+#define PE6  42
+#define PC13 43
+#define PC0  44 // A0
+#define PC1  45 // A1
+#define PC2  46 // A2
+#define PC3  47 // A3
+#define PA0  48 // A4/WK_UP: BUT K_UP
+#define PA1  49 // A5
+#define PA2  50 // A6
+#define PA3  51 // A7
+#define PA4  52 // A8
+#define PA5  53 // A9
+#define PC4  54 // A10
+#define PC5  55 // A11
+#define PB0  56 // A12
+#define PB1  57 // A13
+#define PA6  58 // LED D2
+#define PA7  59 // LED D3 (active LOW)
+#define PE7  60
+#define PE8  61
+#define PE9  62
+#define PE10 63
+#define PE11 64
+#define PE12 65
+#define PE13 66
+#define PE14 67
+#define PE15 68
+#define PB10 69
+#define PB11 70
+#define PB12 71
+#define PB13 72
+#define PB14 73
+#define PB4  74
+
+// This must be a literal
+#define NUM_DIGITAL_PINS        75
+// This must be a literal with a value less than or equal to MAX_ANALOG_INPUTS
+#define NUM_ANALOG_INPUTS       14
+#define NUM_ANALOG_FIRST        44
+
+// Below ADC, DAC and PWM definitions already done in the core
+// Could be redefined here if needed
+// ADC resolution is 12bits
+//#define ADC_RESOLUTION          12
+//#define DACC_RESOLUTION         12
+
+// PWM resolution
+#define PWM_RESOLUTION          8
+#define PWM_FREQUENCY           20000
+#define PWM_MAX_DUTY_CYCLE      255
+
+// On-board LED pin number
+#define LED_D2                  PA6
+#define LED_D3                  PA7
+
+// Board specific button
+#define BTN_K_UP                PA0
+
+#define LED_BUILTIN             LED_D2
+#define LED_GREEN               LED_D2
+
+// On-board user button
+#define BTN_K0                  PE4
+#define BTN_K1                  PE3
+#define USER_BTN                BTN_K0
+
+// Below SPI and I2C definitions already done in the core
+// Could be redefined here if differs from the default one
+// SPI Definitions
+#define PIN_SPI_MOSI            PB15
+#define PIN_SPI_MISO            PB14
+#define PIN_SPI_SCK             PB13
+#define PIN_SPI_SS              PB12
+//#define PIN_SPI_SS1             PB0 // W25Q16 (on board flash)
+
+// I2C Definitions
+#define PIN_WIRE_SDA            PB7
+#define PIN_WIRE_SCL            PB6
+
+// Timer Definitions
+//Do not use timer used by PWM pins when possible. See PinMap_PWM in PeripheralPins.c
+#define TIMER_TONE              TIM6
+
+// Do not use basic timer: OC is required
+#define TIMER_SERVO             TIM2  //TODO: advanced-control timers don't work
+
+// UART Definitions
+// Define here Serial instance number to map on Serial generic name
+#define SERIAL_UART_INSTANCE    1 //ex: 2 for Serial2 (USART2)
+// DEBUG_UART could be redefined to print on another instance than 'Serial'
+//#define DEBUG_UART              ((USART_TypeDef *) U(S)ARTX) // ex: USART3
+// DEBUG_UART baudrate, default: 9600 if not defined
+//#define DEBUG_UART_BAUDRATE     x
+// DEBUG_UART Tx pin name, default: the first one found in PinMap_UART_TX for DEBUG_UART
+//#define DEBUG_PINNAME_TX        PX_n // PinName used for TX
+
+// Default pin used for 'Serial' instance (ex: ST-Link)
+// Mandatory for Firmata
+#define PIN_SERIAL_RX           PA10
+#define PIN_SERIAL_TX           PA9
+
+#ifdef __cplusplus
+} // extern "C"
+#endif
+/*----------------------------------------------------------------------------
+ *        Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+
+#ifdef __cplusplus
+// These serial port names are intended to allow libraries and architecture-neutral
+// sketches to automatically default to the correct port name for a particular type
+// of use.  For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
+// the first hardware serial port whose RX/TX pins are not dedicated to another use.
+//
+// SERIAL_PORT_MONITOR        Port which normally prints to the Arduino Serial Monitor
+//
+// SERIAL_PORT_USBVIRTUAL     Port which is USB virtual serial
+//
+// SERIAL_PORT_LINUXBRIDGE    Port which connects to a Linux system via Bridge library
+//
+// SERIAL_PORT_HARDWARE       Hardware serial port, physical RX & TX pins.
+//
+// SERIAL_PORT_HARDWARE_OPEN  Hardware serial ports which are open for use.  Their RX & TX
+//                            pins are NOT connected to anything by default.
+#define SERIAL_PORT_MONITOR     Serial
+#define SERIAL_PORT_HARDWARE    Serial1
+#endif
+
+#endif /* _VARIANT_ARDUINO_STM32_ */