diff --git a/Marlin/Marlin.h b/Marlin/Marlin.h index 53518deaf1..58d56cdbfe 100644 --- a/Marlin/Marlin.h +++ b/Marlin/Marlin.h @@ -270,7 +270,7 @@ extern bool axis_known_position[XYZ]; // axis[n].is_known extern bool axis_homed[XYZ]; // axis[n].is_homed extern volatile bool wait_for_heatup; -#if ENABLED(ULTIPANEL) || ENABLED(EMERGENCY_PARSER) +#if ENABLED(EMERGENCY_PARSER) || ENABLED(ULTIPANEL) extern volatile bool wait_for_user; #endif diff --git a/Marlin/MarlinSerial.cpp b/Marlin/MarlinSerial.cpp index 3bb2a822e3..682c73048a 100644 --- a/Marlin/MarlinSerial.cpp +++ b/Marlin/MarlinSerial.cpp @@ -508,10 +508,7 @@ MarlinSerial customizedSerial; if (c == '\n') { switch (state) { case state_M108: - wait_for_heatup = false; - #if DISABLED(ULTIPANEL) - wait_for_user = false; - #endif + wait_for_user = wait_for_heatup = false; break; case state_M112: kill(PSTR(MSG_KILLED)); diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 3e57dd9a85..f3588fd289 100755 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -1046,7 +1046,12 @@ inline void get_serial_commands() { #if DISABLED(EMERGENCY_PARSER) // If command was e-stop process now - if (strcmp(command, "M108") == 0) wait_for_heatup = false; + if (strcmp(command, "M108") == 0) { + wait_for_heatup = false; + #if ENABLED(ULTIPANEL) + wait_for_user = false; + #endif + } if (strcmp(command, "M112") == 0) kill(PSTR(MSG_KILLED)); if (strcmp(command, "M410") == 0) { quickstop_stepper(); } #endif @@ -4414,7 +4419,6 @@ inline void gcode_G92() { dontExpireStatus(); #endif } - lcd_ignore_click(); #else @@ -4425,53 +4429,28 @@ inline void gcode_G92() { #endif - #if ENABLED(EMERGENCY_PARSER) - wait_for_user = true; - #endif - + wait_for_user = true; KEEPALIVE_STATE(PAUSED_FOR_USER); stepper.synchronize(); refresh_cmd_timeout(); - #if ENABLED(ULTIPANEL) - - #if ENABLED(EMERGENCY_PARSER) - #define M1_WAIT_CONDITION (!lcd_clicked() && wait_for_user) + if (codenum > 0) { + codenum += previous_cmd_ms; // wait until this time for a click + while (PENDING(millis(), codenum) && wait_for_user) idle(); + } + else { + #if ENABLED(ULTIPANEL) + if (lcd_detected()) { + while (wait_for_user) idle(); + IS_SD_PRINTING ? LCD_MESSAGEPGM(MSG_RESUMING) : LCD_MESSAGEPGM(WELCOME_MSG); + } #else - #define M1_WAIT_CONDITION !lcd_clicked() + while (wait_for_user) idle(); #endif + } - if (codenum > 0) { - codenum += previous_cmd_ms; // wait until this time for a click - while (PENDING(millis(), codenum) && M1_WAIT_CONDITION) idle(); - lcd_ignore_click(false); - } - else if (lcd_detected()) { - while (M1_WAIT_CONDITION) idle(); - } - else goto ExitM1; - - IS_SD_PRINTING ? LCD_MESSAGEPGM(MSG_RESUMING) : LCD_MESSAGEPGM(WELCOME_MSG); - - #else - - if (codenum > 0) { - codenum += previous_cmd_ms; // wait until this time for an M108 - while (PENDING(millis(), codenum) && wait_for_user) idle(); - } - else while (wait_for_user) idle(); - - #endif - -#if ENABLED(ULTIPANEL) - ExitM1: -#endif - - #if ENABLED(EMERGENCY_PARSER) - wait_for_user = false; - #endif - + wait_for_user = false; KEEPALIVE_STATE(IN_HANDLER); } @@ -5539,47 +5518,27 @@ inline void gcode_M140() { * F */ inline void gcode_M145() { - int8_t material = code_seen('S') ? (int8_t)code_value_int() : 0; - if (material < 0 || material > 1) { + uint8_t material = code_seen('S') ? (uint8_t)code_value_int() : 0; + if (material >= COUNT(lcd_preheat_hotend_temp)) { SERIAL_ERROR_START; SERIAL_ERRORLNPGM(MSG_ERR_MATERIAL_INDEX); } else { int v; - switch (material) { - case 0: - if (code_seen('H')) { - v = code_value_int(); - preheatHotendTemp1 = constrain(v, EXTRUDE_MINTEMP, HEATER_0_MAXTEMP - 15); - } - if (code_seen('F')) { - v = code_value_int(); - preheatFanSpeed1 = constrain(v, 0, 255); - } - #if TEMP_SENSOR_BED != 0 - if (code_seen('B')) { - v = code_value_int(); - preheatBedTemp1 = constrain(v, BED_MINTEMP, BED_MAXTEMP - 15); - } - #endif - break; - case 1: - if (code_seen('H')) { - v = code_value_int(); - preheatHotendTemp2 = constrain(v, EXTRUDE_MINTEMP, HEATER_0_MAXTEMP - 15); - } - if (code_seen('F')) { - v = code_value_int(); - preheatFanSpeed2 = constrain(v, 0, 255); - } - #if TEMP_SENSOR_BED != 0 - if (code_seen('B')) { - v = code_value_int(); - preheatBedTemp2 = constrain(v, BED_MINTEMP, BED_MAXTEMP - 15); - } - #endif - break; + if (code_seen('H')) { + v = code_value_int(); + lcd_preheat_hotend_temp[material] = constrain(v, EXTRUDE_MINTEMP, HEATER_0_MAXTEMP - 15); } + if (code_seen('F')) { + v = code_value_int(); + lcd_preheat_fan_speed[material] = constrain(v, 0, 255); + } + #if TEMP_SENSOR_BED != 0 + if (code_seen('B')) { + v = code_value_int(); + lcd_preheat_bed_temp[material] = constrain(v, BED_MINTEMP, BED_MAXTEMP - 15); + } + #endif } } @@ -5590,13 +5549,9 @@ inline void gcode_M140() { * M149: Set temperature units */ inline void gcode_M149() { - if (code_seen('C')) { - set_input_temp_units(TEMPUNIT_C); - } else if (code_seen('K')) { - set_input_temp_units(TEMPUNIT_K); - } else if (code_seen('F')) { - set_input_temp_units(TEMPUNIT_F); - } + if (code_seen('C')) set_input_temp_units(TEMPUNIT_C); + else if (code_seen('K')) set_input_temp_units(TEMPUNIT_K); + else if (code_seen('F')) set_input_temp_units(TEMPUNIT_F); } #endif @@ -6874,7 +6829,10 @@ inline void gcode_M503() { // Wait for filament insert by user and press button lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_INSERT); - while (!lcd_clicked()) { + // LCD click or M108 will clear this + wait_for_user = true; + + while (wait_for_user) { #if HAS_BUZZER millis_t ms = millis(); if (ms >= next_buzz) { @@ -6884,9 +6842,6 @@ inline void gcode_M503() { #endif idle(true); } - delay(100); - while (lcd_clicked()) idle(true); - delay(100); // Show load message lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_LOAD); diff --git a/Marlin/configuration_store.cpp b/Marlin/configuration_store.cpp index 15fe1bce0c..d6bc2bee16 100644 --- a/Marlin/configuration_store.cpp +++ b/Marlin/configuration_store.cpp @@ -86,12 +86,9 @@ * 301 M666 Z z_endstop_adj (float) * * ULTIPANEL: - * 305 M145 S0 H preheatHotendTemp1 (int) - * 307 M145 S0 B preheatBedTemp1 (int) - * 309 M145 S0 F preheatFanSpeed1 (int) - * 311 M145 S1 H preheatHotendTemp2 (int) - * 313 M145 S1 B preheatBedTemp2 (int) - * 315 M145 S1 F preheatFanSpeed2 (int) + * 305 M145 S0 H lcd_preheat_hotend_temp (int x2) + * 309 M145 S0 B lcd_preheat_bed_temp (int x2) + * 313 M145 S0 F lcd_preheat_fan_speed (int x2) * * PIDTEMP: * 317 M301 E0 PIDC Kp[0], Ki[0], Kd[0], Kc[0] (float x4) @@ -277,16 +274,14 @@ void Config_Postprocess() { #endif #if DISABLED(ULTIPANEL) - int preheatHotendTemp1 = PREHEAT_1_TEMP_HOTEND, preheatBedTemp1 = PREHEAT_1_TEMP_BED, preheatFanSpeed1 = PREHEAT_1_FAN_SPEED, - preheatHotendTemp2 = PREHEAT_2_TEMP_HOTEND, preheatBedTemp2 = PREHEAT_2_TEMP_BED, preheatFanSpeed2 = PREHEAT_2_FAN_SPEED; + const int lcd_preheat_hotend_temp[2] = { PREHEAT_1_TEMP_HOTEND, PREHEAT_2_TEMP_HOTEND }, + lcd_preheat_bed_temp[2] = { PREHEAT_1_TEMP_BED, PREHEAT_2_TEMP_BED }, + lcd_preheat_fan_speed[2] = { PREHEAT_1_FAN_SPEED, PREHEAT_2_FAN_SPEED }; #endif // !ULTIPANEL - EEPROM_WRITE(preheatHotendTemp1); - EEPROM_WRITE(preheatBedTemp1); - EEPROM_WRITE(preheatFanSpeed1); - EEPROM_WRITE(preheatHotendTemp2); - EEPROM_WRITE(preheatBedTemp2); - EEPROM_WRITE(preheatFanSpeed2); + EEPROM_WRITE(lcd_preheat_hotend_temp); + EEPROM_WRITE(lcd_preheat_bed_temp); + EEPROM_WRITE(lcd_preheat_fan_speed); for (uint8_t e = 0; e < MAX_EXTRUDERS; e++) { @@ -465,16 +460,12 @@ void Config_Postprocess() { #endif #if DISABLED(ULTIPANEL) - int preheatHotendTemp1, preheatBedTemp1, preheatFanSpeed1, - preheatHotendTemp2, preheatBedTemp2, preheatFanSpeed2; + int lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2], lcd_preheat_fan_speed[2]; #endif - EEPROM_READ(preheatHotendTemp1); - EEPROM_READ(preheatBedTemp1); - EEPROM_READ(preheatFanSpeed1); - EEPROM_READ(preheatHotendTemp2); - EEPROM_READ(preheatBedTemp2); - EEPROM_READ(preheatFanSpeed2); + EEPROM_READ(lcd_preheat_hotend_temp); + EEPROM_READ(lcd_preheat_bed_temp); + EEPROM_READ(lcd_preheat_fan_speed); #if ENABLED(PIDTEMP) for (uint8_t e = 0; e < MAX_EXTRUDERS; e++) { @@ -639,12 +630,12 @@ void Config_ResetDefault() { #endif #if ENABLED(ULTIPANEL) - preheatHotendTemp1 = PREHEAT_1_TEMP_HOTEND; - preheatBedTemp1 = PREHEAT_1_TEMP_BED; - preheatFanSpeed1 = PREHEAT_1_FAN_SPEED; - preheatHotendTemp2 = PREHEAT_2_TEMP_HOTEND; - preheatBedTemp2 = PREHEAT_2_TEMP_BED; - preheatFanSpeed2 = PREHEAT_2_FAN_SPEED; + lcd_preheat_hotend_temp[0] = PREHEAT_1_TEMP_HOTEND; + lcd_preheat_hotend_temp[1] = PREHEAT_2_TEMP_HOTEND; + lcd_preheat_bed_temp[0] = PREHEAT_1_TEMP_BED; + lcd_preheat_bed_temp[1] = PREHEAT_2_TEMP_BED; + lcd_preheat_fan_speed[0] = PREHEAT_1_FAN_SPEED; + lcd_preheat_fan_speed[1] = PREHEAT_2_FAN_SPEED; #endif #if HAS_LCD_CONTRAST @@ -863,15 +854,13 @@ void Config_ResetDefault() { SERIAL_ECHOLNPGM("Material heatup parameters:"); CONFIG_ECHO_START; } - SERIAL_ECHOPAIR(" M145 S0 H", preheatHotendTemp1); - SERIAL_ECHOPAIR(" B", preheatBedTemp1); - SERIAL_ECHOPAIR(" F", preheatFanSpeed1); - SERIAL_EOL; - CONFIG_ECHO_START; - SERIAL_ECHOPAIR(" M145 S1 H", preheatHotendTemp2); - SERIAL_ECHOPAIR(" B", preheatBedTemp2); - SERIAL_ECHOPAIR(" F", preheatFanSpeed2); - SERIAL_EOL; + for (uint8_t i = 0; i < COUNT(lcd_preheat_hotend_temp); i++) { + SERIAL_ECHOPAIR(" M145 S", (int)i); + SERIAL_ECHOPAIR(" H", lcd_preheat_hotend_temp[i]); + SERIAL_ECHOPAIR(" B", lcd_preheat_bed_temp[i]); + SERIAL_ECHOPAIR(" F", lcd_preheat_fan_speed[i]); + SERIAL_EOL; + } #endif // ULTIPANEL #if HAS_PID_HEATING diff --git a/Marlin/planner.h b/Marlin/planner.h index cd4b3b97f5..78f5076c48 100644 --- a/Marlin/planner.h +++ b/Marlin/planner.h @@ -264,7 +264,7 @@ class Planner { * fr_mm_s - (target) speed of the move (mm/s) * extruder - target extruder */ - static FORCE_INLINE void buffer_line(ARG_X, ARG_Y, ARG_Z, const float &e, float fr_mm_s, const uint8_t extruder) { + static FORCE_INLINE void buffer_line(ARG_X, ARG_Y, ARG_Z, const float &e, const float &fr_mm_s, const uint8_t extruder) { #if PLANNER_LEVELING && IS_CARTESIAN apply_leveling(lx, ly, lz); #endif @@ -280,7 +280,7 @@ class Planner { * fr_mm_s - (target) speed of the move (mm/s) * extruder - target extruder */ - static FORCE_INLINE void buffer_line_kinematic(const float target[XYZE], float fr_mm_s, const uint8_t extruder) { + static FORCE_INLINE void buffer_line_kinematic(const float target[XYZE], const float &fr_mm_s, const uint8_t extruder) { #if PLANNER_LEVELING float pos[XYZ] = { target[X_AXIS], target[Y_AXIS], target[Z_AXIS] }; apply_leveling(pos); @@ -311,9 +311,9 @@ class Planner { _set_position_mm(lx, ly, lz, e); } static void set_position_mm_kinematic(const float position[NUM_AXIS]); - static void set_position_mm(const AxisEnum axis, const float& v); - static FORCE_INLINE void set_z_position_mm(const float& z) { set_position_mm(Z_AXIS, z); } - static FORCE_INLINE void set_e_position_mm(const float& e) { set_position_mm(E_AXIS, e); } + static void set_position_mm(const AxisEnum axis, const float &v); + static FORCE_INLINE void set_z_position_mm(const float &z) { set_position_mm(Z_AXIS, z); } + static FORCE_INLINE void set_e_position_mm(const float &e) { set_position_mm(E_AXIS, e); } /** * Sync from the stepper positions. (e.g., after an interrupted move) @@ -369,7 +369,7 @@ class Planner { * Calculate the distance (not time) it takes to accelerate * from initial_rate to target_rate using the given acceleration: */ - static float estimate_acceleration_distance(float initial_rate, float target_rate, float accel) { + static float estimate_acceleration_distance(const float &initial_rate, const float &target_rate, const float &accel) { if (accel == 0) return 0; // accel was 0, set acceleration distance to 0 return (sq(target_rate) - sq(initial_rate)) / (accel * 2); } @@ -382,7 +382,7 @@ class Planner { * This is used to compute the intersection point between acceleration and deceleration * in cases where the "trapezoid" has no plateau (i.e., never reaches maximum speed) */ - static float intersection_distance(float initial_rate, float final_rate, float accel, float distance) { + static float intersection_distance(const float &initial_rate, const float &final_rate, const float &accel, const float &distance) { if (accel == 0) return 0; // accel was 0, set intersection distance to 0 return (accel * 2 * distance - sq(initial_rate) + sq(final_rate)) / (accel * 4); } @@ -392,7 +392,7 @@ class Planner { * to reach 'target_velocity' using 'acceleration' within a given * 'distance'. */ - static float max_allowable_speed(float accel, float target_velocity, float distance) { + static float max_allowable_speed(const float &accel, const float &target_velocity, const float &distance) { return sqrt(sq(target_velocity) - 2 * accel * distance); } diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp index 2c42874f34..8be85aa0be 100755 --- a/Marlin/ultralcd.cpp +++ b/Marlin/ultralcd.cpp @@ -43,8 +43,7 @@ #include "duration_t.h" #endif -int preheatHotendTemp1, preheatBedTemp1, preheatFanSpeed1, - preheatHotendTemp2, preheatBedTemp2, preheatFanSpeed2; +int lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2], lcd_preheat_fan_speed[2]; #if ENABLED(FILAMENT_LCD_DISPLAY) millis_t previous_lcd_status_ms = 0; @@ -243,7 +242,6 @@ uint8_t lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW; // Set when the LCD needs to * * START_MENU Opening code for a screen with menu items. * Scroll as-needed to keep the selected line in view. - * 'wasClicked' indicates the controller was clicked. */ #define START_SCREEN() \ START_SCREEN_OR_MENU(LCD_HEIGHT); \ @@ -257,7 +255,6 @@ uint8_t lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW; // Set when the LCD needs to if (encoderLine >= encoderTopLine + LCD_HEIGHT) { \ encoderTopLine = encoderLine - (LCD_HEIGHT - 1); \ } \ - bool wasClicked = LCD_CLICKED; \ bool _skipStatic = true; \ SCREEN_OR_MENU_LOOP() @@ -288,8 +285,7 @@ uint8_t lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW; // Set when the LCD needs to if (_menuLineNr == _thisItemNr) { \ if (lcdDrawUpdate) \ lcd_implementation_drawmenu_ ## TYPE(encoderLine == _thisItemNr, _lcdLineNr, PSTR(LABEL), ## __VA_ARGS__); \ - if (wasClicked && encoderLine == _thisItemNr) { \ - lcd_quick_feedback() + if (lcd_clicked && encoderLine == _thisItemNr) { #define _MENU_ITEM_PART_2(TYPE, ...) \ menu_action_ ## TYPE(__VA_ARGS__); \ @@ -381,9 +377,8 @@ uint8_t lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW; // Set when the LCD needs to menuPosition screen_history[10]; uint8_t screen_history_depth = 0; - bool ignore_click = false; - bool wait_for_unclick; - bool defer_return_to_status = false; + // LCD and menu clicks + bool lcd_clicked, wait_for_unclick, defer_return_to_status; // Variables used when editing values. const char* editLabel; @@ -392,9 +387,9 @@ uint8_t lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW; // Set when the LCD needs to screenFunc_t callbackFunc; // call this after editing /** - * General function to go directly to a menu + * General function to go directly to a screen */ - static void lcd_goto_screen(screenFunc_t screen, const bool feedback = false, const uint32_t encoder = 0) { + static void lcd_goto_screen(screenFunc_t screen, const uint32_t encoder = 0) { if (currentScreen != screen) { currentScreen = screen; encoderPosition = encoder; @@ -402,7 +397,6 @@ uint8_t lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW; // Set when the LCD needs to defer_return_to_status = false; screen_history_depth = 0; } - if (feedback) lcd_quick_feedback(); lcd_implementation_clear(); #if ENABLED(LCD_PROGRESS_BAR) // For LCD_PROGRESS_BAR re-initialize custom characters @@ -427,7 +421,6 @@ uint8_t lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW; // Set when the LCD needs to --screen_history_depth; lcd_goto_screen( screen_history[screen_history_depth].menu_function, - feedback, screen_history[screen_history_depth].encoder_position ); } @@ -435,11 +428,6 @@ uint8_t lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW; // Set when the LCD needs to lcd_return_to_status(); } - void lcd_ignore_click(bool b) { - ignore_click = b; - wait_for_unclick = false; - } - #endif // ULTIPANEL /** @@ -493,23 +481,7 @@ static void lcd_status_screen() { #if ENABLED(ULTIPANEL) - bool current_click = LCD_CLICKED; - - if (ignore_click) { - if (wait_for_unclick) { - if (!current_click) - ignore_click = wait_for_unclick = false; - else - current_click = false; - } - else if (current_click) { - lcd_quick_feedback(); - wait_for_unclick = true; - current_click = false; - } - } - - if (current_click) { + if (lcd_clicked) { #if ENABLED(FILAMENT_LCD_DISPLAY) previous_lcd_status_ms = millis(); // get status message to show up for a while #endif @@ -518,7 +490,7 @@ static void lcd_status_screen() { false #endif ); - lcd_goto_screen(lcd_main_menu, true); + lcd_goto_screen(lcd_main_menu); } #if ENABLED(ULTIPANEL_FEEDMULTIPLY) @@ -676,7 +648,7 @@ void kill_screen(const char* lcd_msg) { long babysteps_done = 0; static void _lcd_babystep(const AxisEnum axis, const char* msg) { - if (LCD_CLICKED) { defer_return_to_status = false; lcd_goto_previous_menu(true); return; } + if (lcd_clicked) { defer_return_to_status = false; return lcd_goto_previous_menu(true); } ENCODER_DIRECTION_NORMAL(); if (encoderPosition) { int babystep_increment = (int32_t)encoderPosition * BABYSTEP_MULTIPLICATOR; @@ -914,29 +886,29 @@ void kill_screen(const char* lcd_msg) { } #if TEMP_SENSOR_0 != 0 - void lcd_preheat_pla0() { _lcd_preheat(0, preheatHotendTemp1, preheatBedTemp1, preheatFanSpeed1); } - void lcd_preheat_abs0() { _lcd_preheat(0, preheatHotendTemp2, preheatBedTemp2, preheatFanSpeed2); } + void lcd_preheat_pla0() { _lcd_preheat(0, lcd_preheat_hotend_temp[0], lcd_preheat_bed_temp[0], lcd_preheat_fan_speed[0]); } + void lcd_preheat_abs0() { _lcd_preheat(0, lcd_preheat_hotend_temp[1], lcd_preheat_bed_temp[1], lcd_preheat_fan_speed[1]); } #endif #if HOTENDS > 1 - void lcd_preheat_pla1() { _lcd_preheat(1, preheatHotendTemp1, preheatBedTemp1, preheatFanSpeed1); } - void lcd_preheat_abs1() { _lcd_preheat(1, preheatHotendTemp2, preheatBedTemp2, preheatFanSpeed2); } + void lcd_preheat_pla1() { _lcd_preheat(1, lcd_preheat_hotend_temp[0], lcd_preheat_bed_temp[0], lcd_preheat_fan_speed[0]); } + void lcd_preheat_abs1() { _lcd_preheat(1, lcd_preheat_hotend_temp[1], lcd_preheat_bed_temp[1], lcd_preheat_fan_speed[1]); } #if HOTENDS > 2 - void lcd_preheat_pla2() { _lcd_preheat(2, preheatHotendTemp1, preheatBedTemp1, preheatFanSpeed1); } - void lcd_preheat_abs2() { _lcd_preheat(2, preheatHotendTemp2, preheatBedTemp2, preheatFanSpeed2); } + void lcd_preheat_pla2() { _lcd_preheat(2, lcd_preheat_hotend_temp[0], lcd_preheat_bed_temp[0], lcd_preheat_fan_speed[0]); } + void lcd_preheat_abs2() { _lcd_preheat(2, lcd_preheat_hotend_temp[1], lcd_preheat_bed_temp[1], lcd_preheat_fan_speed[1]); } #if HOTENDS > 3 - void lcd_preheat_pla3() { _lcd_preheat(3, preheatHotendTemp1, preheatBedTemp1, preheatFanSpeed1); } - void lcd_preheat_abs3() { _lcd_preheat(3, preheatHotendTemp2, preheatBedTemp2, preheatFanSpeed2); } + void lcd_preheat_pla3() { _lcd_preheat(3, lcd_preheat_hotend_temp[0], lcd_preheat_bed_temp[0], lcd_preheat_fan_speed[0]); } + void lcd_preheat_abs3() { _lcd_preheat(3, lcd_preheat_hotend_temp[1], lcd_preheat_bed_temp[1], lcd_preheat_fan_speed[1]); } #endif #endif void lcd_preheat_pla0123() { #if HOTENDS > 1 - thermalManager.setTargetHotend(preheatHotendTemp1, 1); + thermalManager.setTargetHotend(lcd_preheat_hotend_temp[0], 1); #if HOTENDS > 2 - thermalManager.setTargetHotend(preheatHotendTemp1, 2); + thermalManager.setTargetHotend(lcd_preheat_hotend_temp[0], 2); #if HOTENDS > 3 - thermalManager.setTargetHotend(preheatHotendTemp1, 3); + thermalManager.setTargetHotend(lcd_preheat_hotend_temp[0], 3); #endif #endif #endif @@ -944,11 +916,11 @@ void kill_screen(const char* lcd_msg) { } void lcd_preheat_abs0123() { #if HOTENDS > 1 - thermalManager.setTargetHotend(preheatHotendTemp2, 1); + thermalManager.setTargetHotend(lcd_preheat_hotend_temp[1], 1); #if HOTENDS > 2 - thermalManager.setTargetHotend(preheatHotendTemp2, 2); + thermalManager.setTargetHotend(lcd_preheat_hotend_temp[1], 2); #if HOTENDS > 3 - thermalManager.setTargetHotend(preheatHotendTemp2, 3); + thermalManager.setTargetHotend(lcd_preheat_hotend_temp[1], 3); #endif #endif #endif @@ -958,8 +930,8 @@ void kill_screen(const char* lcd_msg) { #endif // HOTENDS > 1 #if TEMP_SENSOR_BED != 0 - void lcd_preheat_pla_bedonly() { _lcd_preheat(0, 0, preheatBedTemp1, preheatFanSpeed1); } - void lcd_preheat_abs_bedonly() { _lcd_preheat(0, 0, preheatBedTemp2, preheatFanSpeed2); } + void lcd_preheat_pla_bedonly() { _lcd_preheat(0, 0, lcd_preheat_bed_temp[0], lcd_preheat_fan_speed[0]); } + void lcd_preheat_abs_bedonly() { _lcd_preheat(0, 0, lcd_preheat_bed_temp[1], lcd_preheat_fan_speed[1]); } #endif #if TEMP_SENSOR_0 != 0 && (TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_3 != 0 || TEMP_SENSOR_BED != 0) @@ -1092,12 +1064,12 @@ void kill_screen(const char* lcd_msg) { } static bool debounce_click = false; - if (LCD_CLICKED) { + if (lcd_clicked) { if (!debounce_click) { debounce_click = true; // ignore multiple "clicks" in a row mbl.set_zigzag_z(_lcd_level_bed_position++, current_position[Z_AXIS]); if (_lcd_level_bed_position == (MESH_NUM_X_POINTS) * (MESH_NUM_Y_POINTS)) { - lcd_goto_screen(_lcd_level_bed_done, true); + lcd_goto_screen(_lcd_level_bed_done); current_position[Z_AXIS] = MESH_HOME_SEARCH_Z + Z_HOMING_HEIGHT; line_to_current(Z_AXIS); @@ -1113,7 +1085,7 @@ void kill_screen(const char* lcd_msg) { #endif } else { - lcd_goto_screen(_lcd_level_goto_next_point, true); + lcd_goto_screen(_lcd_level_goto_next_point); } } } @@ -1171,7 +1143,7 @@ void kill_screen(const char* lcd_msg) { */ static void _lcd_level_bed_homing_done() { if (lcdDrawUpdate) lcd_implementation_drawedit(PSTR(MSG_LEVEL_BED_WAITING)); - if (LCD_CLICKED) { + if (lcd_clicked) { _lcd_level_bed_position = 0; current_position[Z_AXIS] = MESH_HOME_SEARCH_Z #if Z_HOME_DIR > 0 @@ -1179,7 +1151,7 @@ void kill_screen(const char* lcd_msg) { #endif ; planner.set_position_mm(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); - lcd_goto_screen(_lcd_level_goto_next_point, true); + lcd_goto_screen(_lcd_level_goto_next_point); } } @@ -1385,7 +1357,7 @@ void kill_screen(const char* lcd_msg) { */ static void _lcd_move_xyz(const char* name, AxisEnum axis) { - if (LCD_CLICKED) { lcd_goto_previous_menu(true); return; } + if (lcd_clicked) { return lcd_goto_previous_menu(true); } ENCODER_DIRECTION_NORMAL(); if (encoderPosition) { refresh_cmd_timeout(); @@ -1425,7 +1397,7 @@ void kill_screen(const char* lcd_msg) { int8_t eindex=-1 #endif ) { - if (LCD_CLICKED) { lcd_goto_previous_menu(true); return; } + if (lcd_clicked) { return lcd_goto_previous_menu(true); } ENCODER_DIRECTION_NORMAL(); if (encoderPosition) { current_position[E_AXIS] += float((int32_t)encoderPosition) * move_menu_scale; @@ -1793,20 +1765,15 @@ void kill_screen(const char* lcd_msg) { END_MENU(); } - /** - * - * "Temperature" > "Preheat PLA conf" submenu - * - */ - static void lcd_control_temperature_preheat_pla_settings_menu() { + static void _lcd_control_temperature_preheat_settings_menu(uint8_t material) { START_MENU(); MENU_BACK(MSG_TEMPERATURE); - MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &preheatFanSpeed1, 0, 255); + MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &lcd_preheat_fan_speed[material], 0, 255); #if TEMP_SENSOR_0 != 0 - MENU_ITEM_EDIT(int3, MSG_NOZZLE, &preheatHotendTemp1, HEATER_0_MINTEMP, HEATER_0_MAXTEMP - 15); + MENU_ITEM_EDIT(int3, MSG_NOZZLE, &lcd_preheat_hotend_temp[material], HEATER_0_MINTEMP, HEATER_0_MAXTEMP - 15); #endif #if TEMP_SENSOR_BED != 0 - MENU_ITEM_EDIT(int3, MSG_BED, &preheatBedTemp1, BED_MINTEMP, BED_MAXTEMP - 15); + MENU_ITEM_EDIT(int3, MSG_BED, &lcd_preheat_bed_temp[material], BED_MINTEMP, BED_MAXTEMP - 15); #endif #if ENABLED(EEPROM_SETTINGS) MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings); @@ -1814,26 +1781,19 @@ void kill_screen(const char* lcd_msg) { END_MENU(); } + /** + * + * "Temperature" > "Preheat PLA conf" submenu + * + */ + static void lcd_control_temperature_preheat_pla_settings_menu() { _lcd_control_temperature_preheat_settings_menu(0); } + /** * * "Temperature" > "Preheat ABS conf" submenu * */ - static void lcd_control_temperature_preheat_abs_settings_menu() { - START_MENU(); - MENU_BACK(MSG_TEMPERATURE); - MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &preheatFanSpeed2, 0, 255); - #if TEMP_SENSOR_0 != 0 - MENU_ITEM_EDIT(int3, MSG_NOZZLE, &preheatHotendTemp2, HEATER_0_MINTEMP, HEATER_0_MAXTEMP - 15); - #endif - #if TEMP_SENSOR_BED != 0 - MENU_ITEM_EDIT(int3, MSG_BED, &preheatBedTemp2, BED_MINTEMP, BED_MAXTEMP - 15); - #endif - #if ENABLED(EEPROM_SETTINGS) - MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings); - #endif - END_MENU(); - } + static void lcd_control_temperature_preheat_abs_settings_menu() { _lcd_control_temperature_preheat_settings_menu(1); } static void _reset_acceleration_rates() { planner.reset_acceleration_rates(); } static void _planner_refresh_positioning() { planner.refresh_positioning(); } @@ -1924,7 +1884,7 @@ void kill_screen(const char* lcd_msg) { */ #if HAS_LCD_CONTRAST static void lcd_set_contrast() { - if (LCD_CLICKED) { lcd_goto_previous_menu(true); return; } + if (lcd_clicked) { return lcd_goto_previous_menu(true); } ENCODER_DIRECTION_NORMAL(); if (encoderPosition) { set_lcd_contrast(lcd_contrast + encoderPosition); @@ -1991,7 +1951,7 @@ void kill_screen(const char* lcd_msg) { */ void lcd_sdcard_menu() { ENCODER_DIRECTION_MENUS(); - if (lcdDrawUpdate == 0 && LCD_CLICKED == 0) return; // nothing to do (so don't thrash the SD card) + if (!lcdDrawUpdate && !lcd_clicked) return; // nothing to do (so don't thrash the SD card) uint16_t fileCnt = card.getnrfilenames(); START_MENU(); MENU_BACK(MSG_MAIN); @@ -2037,7 +1997,7 @@ void kill_screen(const char* lcd_msg) { * */ static void lcd_info_stats_menu() { - if (LCD_CLICKED) { lcd_goto_previous_menu(true); return; } + if (lcd_clicked) { return lcd_goto_previous_menu(true); } char buffer[21]; printStatistics stats = print_job_timer.getStats(); @@ -2071,7 +2031,7 @@ void kill_screen(const char* lcd_msg) { * */ static void lcd_info_thermistors_menu() { - if (LCD_CLICKED) { lcd_goto_previous_menu(true); return; } + if (lcd_clicked) { return lcd_goto_previous_menu(true); } START_SCREEN(); #define THERMISTOR_ID TEMP_SENSOR_0 #include "thermistornames.h" @@ -2123,7 +2083,7 @@ void kill_screen(const char* lcd_msg) { * */ static void lcd_info_board_menu() { - if (LCD_CLICKED) { lcd_goto_previous_menu(true); return; } + if (lcd_clicked) { return lcd_goto_previous_menu(true); } START_SCREEN(); STATIC_ITEM(BOARD_NAME, true, true); // MyPrinterController STATIC_ITEM(MSG_INFO_BAUDRATE ": " STRINGIFY(BAUDRATE), true); // Baud: 250000 @@ -2144,7 +2104,7 @@ void kill_screen(const char* lcd_msg) { * */ static void lcd_info_printer_menu() { - if (LCD_CLICKED) { lcd_goto_previous_menu(true); return; } + if (lcd_clicked) { return lcd_goto_previous_menu(true); } START_SCREEN(); STATIC_ITEM(MSG_MARLIN, true, true); // Marlin STATIC_ITEM(SHORT_BUILD_VERSION, true); // x.x.x-Branch @@ -2334,16 +2294,15 @@ void kill_screen(const char* lcd_msg) { #define menu_edit_type(_type, _name, _strFunc, scale) \ bool _menu_edit_ ## _name () { \ ENCODER_DIRECTION_NORMAL(); \ - bool isClicked = LCD_CLICKED; \ if ((int32_t)encoderPosition < 0) encoderPosition = 0; \ if ((int32_t)encoderPosition > maxEditValue) encoderPosition = maxEditValue; \ if (lcdDrawUpdate) \ lcd_implementation_drawedit(editLabel, _strFunc(((_type)((int32_t)encoderPosition + minEditValue)) / scale)); \ - if (isClicked) { \ + if (lcd_clicked) { \ *((_type*)editValue) = ((_type)((int32_t)encoderPosition + minEditValue)) / scale; \ lcd_goto_previous_menu(true); \ } \ - return isClicked; \ + return lcd_clicked; \ } \ void menu_edit_ ## _name () { _menu_edit_ ## _name(); } \ void menu_edit_callback_ ## _name () { if (_menu_edit_ ## _name ()) (*callbackFunc)(); } \ @@ -2614,9 +2573,20 @@ void lcd_update() { #if ENABLED(ULTIPANEL) static millis_t return_to_status_ms = 0; manage_manual_move(); - #endif - lcd_buttons_update(); + lcd_buttons_update(); + + // If the action button is pressed... + if (LCD_CLICKED) { + if (!wait_for_unclick) { // If not waiting for a debounce release: + wait_for_unclick = true; // Set debounce flag to ignore continous clicks + lcd_clicked = !wait_for_user; // Keep the click if not waiting for a user-click + wait_for_user = false; // Any click clears wait for user + lcd_quick_feedback(); // Always make a click sound + } + } + else wait_for_unclick = false; + #endif #if ENABLED(SDSUPPORT) && PIN_EXISTS(SD_DETECT) @@ -2691,7 +2661,7 @@ void lcd_update() { #endif // REPRAPWORLD_KEYPAD bool encoderPastThreshold = (abs(encoderDiff) >= ENCODER_PULSES_PER_STEP); - if (encoderPastThreshold || LCD_CLICKED) { + if (encoderPastThreshold || lcd_clicked) { if (encoderPastThreshold) { int32_t encoderMultiplier = 1; @@ -2757,7 +2727,7 @@ void lcd_update() { } #if ENABLED(ULTIPANEL) - #define CURRENTSCREEN() (*currentScreen)() + #define CURRENTSCREEN() (*currentScreen)(), lcd_clicked = false #else #define CURRENTSCREEN() lcd_status_screen() #endif @@ -3020,8 +2990,6 @@ void lcd_reset_alert_level() { lcd_status_message_level = 0; } #endif } - bool lcd_clicked() { return LCD_CLICKED; } - #endif // ULTIPANEL #endif // ULTRA_LCD diff --git a/Marlin/ultralcd.h b/Marlin/ultralcd.h index 3652da0057..a89f47c0ef 100644 --- a/Marlin/ultralcd.h +++ b/Marlin/ultralcd.h @@ -30,6 +30,8 @@ #define BUTTON_EXISTS(BN) (defined(BTN_## BN) && BTN_## BN >= 0) #define BUTTON_PRESSED(BN) !READ(BTN_## BN) + extern int lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2], lcd_preheat_fan_speed[2]; + int lcd_strlen(const char* s); int lcd_strlen_P(const char* s); void lcd_update(); @@ -65,34 +67,7 @@ #define LCD_TIMEOUT_TO_STATUS 15000 #if ENABLED(ULTIPANEL) - extern volatile uint8_t buttons; //the last checked buttons in a bit array. - void lcd_buttons_update(); - void lcd_quick_feedback(); // Audible feedback for a button click - could also be visual - bool lcd_clicked(); - void lcd_ignore_click(bool b=true); - #if ENABLED(FILAMENT_CHANGE_FEATURE) - void lcd_filament_change_show_message(FilamentChangeMessage message); - #endif // FILAMENT_CHANGE_FEATURE - - #else - FORCE_INLINE void lcd_buttons_update() {} - #endif - - extern int preheatHotendTemp1; - extern int preheatBedTemp1; - extern int preheatFanSpeed1; - extern int preheatHotendTemp2; - extern int preheatBedTemp2; - extern int preheatFanSpeed2; - - #if ENABLED(FILAMENT_LCD_DISPLAY) - extern millis_t previous_lcd_status_ms; - #endif - - bool lcd_blink(); - - #if ENABLED(ULTIPANEL) #define BLEN_A 0 #define BLEN_B 1 // Encoder click is directly connected @@ -103,8 +78,27 @@ #define EN_A (_BV(BLEN_A)) #define EN_B (_BV(BLEN_B)) #define EN_C (_BV(BLEN_C)) + + extern volatile uint8_t buttons; //the last checked buttons in a bit array. + void lcd_buttons_update(); + void lcd_quick_feedback(); // Audible feedback for a button click - could also be visual + + #if ENABLED(FILAMENT_CHANGE_FEATURE) + void lcd_filament_change_show_message(FilamentChangeMessage message); + #endif // FILAMENT_CHANGE_FEATURE + + #else + + inline void lcd_buttons_update() {} + #endif + #if ENABLED(FILAMENT_LCD_DISPLAY) + extern millis_t previous_lcd_status_ms; + #endif + + bool lcd_blink(); + #if ENABLED(REPRAPWORLD_KEYPAD) // is also ULTIPANEL and NEWPANEL #define REPRAPWORLD_BTN_OFFSET 0 // bit offset into buttons for shift register values @@ -150,21 +144,23 @@ #define LCD_CLICKED ((buttons & EN_C) || (buttons_reprapworld_keypad & EN_REPRAPWORLD_KEYPAD_F1)) #elif ENABLED(NEWPANEL) #define LCD_CLICKED (buttons & EN_C) + #else + #define LCD_CLICKED false #endif #else //no LCD - FORCE_INLINE void lcd_update() {} - FORCE_INLINE void lcd_init() {} - FORCE_INLINE bool lcd_hasstatus() { return false; } - FORCE_INLINE void lcd_setstatus(const char* message, const bool persist=false) {UNUSED(message); UNUSED(persist);} - FORCE_INLINE void lcd_setstatuspgm(const char* message, const uint8_t level=0) {UNUSED(message); UNUSED(level);} - FORCE_INLINE void lcd_buttons_update() {} - FORCE_INLINE void lcd_reset_alert_level() {} - FORCE_INLINE bool lcd_detected(void) { return true; } + inline void lcd_update() {} + inline void lcd_init() {} + inline bool lcd_hasstatus() { return false; } + inline void lcd_setstatus(const char* message, const bool persist=false) { UNUSED(message); UNUSED(persist); } + inline void lcd_setstatuspgm(const char* message, const uint8_t level=0) { UNUSED(message); UNUSED(level); } + inline void lcd_buttons_update() {} + inline void lcd_reset_alert_level() {} + inline bool lcd_detected(void) { return true; } #define LCD_MESSAGEPGM(x) NOOP #define LCD_ALERTMESSAGEPGM(x) NOOP -#endif //ULTRA_LCD +#endif // ULTRA_LCD -#endif //ULTRALCD_H +#endif // ULTRALCD_H