bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

TFT (plus Hardware SPI) for LPC (#19139)

Browse Source
This commit is contained in:
Victor Oliveira 2020-08-26 07:13:58 -03:00 committed by Scott Lahteine
parent 5059586fc3
commit 3b4779fa15
11 changed files with 862 additions and 49 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

256
Marlin/src/HAL/LPC1768/HAL_SPI.cpp
View File

@ -30,7 +30,7 @@
*/
/**
* Hardware SPI and a software SPI implementations are included in this file.
* Hardware SPI and Software SPI implementations are included in this file.
* The hardware SPI runs faster and has higher throughput but is not compatible
* with some LCD interfaces/adapters.
*
@ -51,6 +51,10 @@
#include "../../inc/MarlinConfig.h"
#include <SPI.h>
// Hardware SPI and SPIClass
#include <lpc17xx_pinsel.h>
#include <lpc17xx_clkpwr.h>
// ------------------------
// Public functions
// ------------------------
@ -96,12 +100,6 @@
#else
// Hardware SPI
#include <lpc17xx_pinsel.h>
#include <lpc17xx_ssp.h>
#include <lpc17xx_clkpwr.h>
// decide which HW SPI device to use
#ifndef LPC_HW_SPI_DEV
#if (SCK_PIN == P0_07 && MISO_PIN == P0_08 && MOSI_PIN == P0_09)
@ -114,7 +112,7 @@
#endif
#endif
#endif
#if (LPC_HW_SPI_DEV == 0)
#if LPC_HW_SPI_DEV == 0
#define LPC_SSPn LPC_SSP0
#else
#define LPC_SSPn LPC_SSP1
@ -192,7 +190,7 @@
for (uint16_t i = 0; i < nbyte; i++) buf[i] = doio(0xFF);
}
static uint8_t spiTransfer(uint8_t b) {
uint8_t spiTransfer(uint8_t b) {
return doio(b);
}
@ -211,30 +209,236 @@
#endif // LPC_SOFTWARE_SPI
void SPIClass::begin() { spiBegin(); }
void SPIClass::beginTransaction(const SPISettings &cfg) {
uint8_t spiRate;
switch (cfg.spiRate()) {
case 8000000: spiRate = 0; break;
case 4000000: spiRate = 1; break;
case 2000000: spiRate = 2; break;
case 1000000: spiRate = 3; break;
case 500000: spiRate = 4; break;
case 250000: spiRate = 5; break;
case 125000: spiRate = 6; break;
default: spiRate = 2; break;
}
spiInit(spiRate);
/**
* @brief Wait until TXE (tx empty) flag is set and BSY (busy) flag unset.
*/
static inline void waitSpiTxEnd(LPC_SSP_TypeDef *spi_d) {
while (SSP_GetStatus(spi_d, SSP_STAT_TXFIFO_EMPTY) == RESET) { /* nada */ } // wait until TXE=1
while (SSP_GetStatus(spi_d, SSP_STAT_BUSY) == SET) { /* nada */ } // wait until BSY=0
}
uint8_t SPIClass::transfer(const uint8_t B) { return spiTransfer(B); }
SPIClass::SPIClass(uint8_t device) {
// Init things specific to each SPI device
// clock divider setup is a bit of hack, and needs to be improved at a later date.
PINSEL_CFG_Type PinCfg; // data structure to hold init values
#if BOARD_NR_SPI >= 1
_settings[0].spi_d = LPC_SSP0;
// _settings[0].clockDivider = determine_baud_rate(_settings[0].spi_d, _settings[0].clock);
PinCfg.Funcnum = 2;
PinCfg.OpenDrain = 0;
PinCfg.Pinmode = 0;
PinCfg.Pinnum = LPC176x::pin_bit(BOARD_SPI1_SCK_PIN);
PinCfg.Portnum = LPC176x::pin_port(BOARD_SPI1_SCK_PIN);
PINSEL_ConfigPin(&PinCfg);
SET_OUTPUT(BOARD_SPI1_SCK_PIN);
PinCfg.Pinnum = LPC176x::pin_bit(BOARD_SPI1_MISO_PIN);
PinCfg.Portnum = LPC176x::pin_port(BOARD_SPI1_MISO_PIN);
PINSEL_ConfigPin(&PinCfg);
SET_INPUT(BOARD_SPI1_MISO_PIN);
PinCfg.Pinnum = LPC176x::pin_bit(BOARD_SPI1_MOSI_PIN);
PinCfg.Portnum = LPC176x::pin_port(BOARD_SPI1_MOSI_PIN);
PINSEL_ConfigPin(&PinCfg);
SET_OUTPUT(BOARD_SPI1_MOSI_PIN);
#endif
#if BOARD_NR_SPI >= 2
_settings[1].spi_d = LPC_SSP1;
// _settings[1].clockDivider = determine_baud_rate(_settings[1].spi_d, _settings[1].clock);
PinCfg.Funcnum = 2;
PinCfg.OpenDrain = 0;
PinCfg.Pinmode = 0;
PinCfg.Pinnum = LPC176x::pin_bit(BOARD_SPI2_SCK_PIN);
PinCfg.Portnum = LPC176x::pin_port(BOARD_SPI2_SCK_PIN);
PINSEL_ConfigPin(&PinCfg);
SET_OUTPUT(BOARD_SPI2_SCK_PIN);
PinCfg.Pinnum = LPC176x::pin_bit(BOARD_SPI2_MISO_PIN);
PinCfg.Portnum = LPC176x::pin_port(BOARD_SPI2_MISO_PIN);
PINSEL_ConfigPin(&PinCfg);
SET_INPUT(BOARD_SPI2_MISO_PIN);
PinCfg.Pinnum = LPC176x::pin_bit(BOARD_SPI2_MOSI_PIN);
PinCfg.Portnum = LPC176x::pin_port(BOARD_SPI2_MOSI_PIN);
PINSEL_ConfigPin(&PinCfg);
SET_OUTPUT(BOARD_SPI2_MOSI_PIN);
#endif
setModule(device);
/* Initialize GPDMA controller */
//TODO: call once in the constructor? or each time?
GPDMA_Init();
}
void SPIClass::begin() {
updateSettings();
SSP_Cmd(_currentSetting->spi_d, ENABLE); // start SSP running
}
void SPIClass::beginTransaction(const SPISettings &cfg) {
setBitOrder(cfg.bitOrder);
setDataMode(cfg.dataMode);
setDataSize(cfg.dataSize);
//setClockDivider(determine_baud_rate(_currentSetting->spi_d, settings.clock));
begin();
}
uint8_t SPIClass::transfer(const uint16_t b) {
/* send and receive a single byte */
SSP_ReceiveData(_currentSetting->spi_d); // read any previous data
SSP_SendData(_currentSetting->spi_d, b);
waitSpiTxEnd(_currentSetting->spi_d); // wait for it to finish
return SSP_ReceiveData(_currentSetting->spi_d);
}
uint16_t SPIClass::transfer16(const uint16_t data) {
return (transfer((data >> 8) & 0xFF) << 8)
| (transfer(data & 0xFF) & 0xFF);
}
SPIClass SPI;
void SPIClass::end() {
// SSP_Cmd(_currentSetting->spi_d, DISABLE); // stop device or SSP_DeInit?
SSP_DeInit(_currentSetting->spi_d);
}
void SPIClass::send(uint8_t data) {
SSP_SendData(_currentSetting->spi_d, data);
}
void SPIClass::dmaSend(void *buf, uint16_t length, bool minc) {
//TODO: LPC dma can only write 0xFFF bytes at once.
GPDMA_Channel_CFG_Type GPDMACfg;
/* Configure GPDMA channel 0 -------------------------------------------------------------*/
/* DMA Channel 0 */
GPDMACfg.ChannelNum = 0;
// Source memory
GPDMACfg.SrcMemAddr = (uint32_t)buf;
// Destination memory - Not used
GPDMACfg.DstMemAddr = 0;
// Transfer size
GPDMACfg.TransferSize = (minc ? length : 1);
// Transfer width
GPDMACfg.TransferWidth = (_currentSetting->dataSize == DATA_SIZE_16BIT) ? GPDMA_WIDTH_HALFWORD : GPDMA_WIDTH_BYTE;
// Transfer type
GPDMACfg.TransferType = GPDMA_TRANSFERTYPE_M2P;
// Source connection - unused
GPDMACfg.SrcConn = 0;
// Destination connection
GPDMACfg.DstConn = (_currentSetting->spi_d == LPC_SSP0) ? GPDMA_CONN_SSP0_Tx : GPDMA_CONN_SSP1_Tx;
GPDMACfg.DMALLI = 0;
// Enable dma on SPI
SSP_DMACmd(_currentSetting->spi_d, SSP_DMA_TX, ENABLE);
// if minc=false, I'm repeating the same byte 'length' times, as I could not find yet how do GPDMA without memory increment
do {
// Setup channel with given parameter
GPDMA_Setup(&GPDMACfg);
// enabled dma
GPDMA_ChannelCmd(0, ENABLE);
// wait data transfer
while (!GPDMA_IntGetStatus(GPDMA_STAT_INTTC, 0) && !GPDMA_IntGetStatus(GPDMA_STAT_INTERR, 0)) { }
// clear err and int
GPDMA_ClearIntPending (GPDMA_STATCLR_INTTC, 0);
GPDMA_ClearIntPending (GPDMA_STATCLR_INTERR, 0);
// dma disable
GPDMA_ChannelCmd(0, DISABLE);
--length;
} while (!minc && length > 0);
waitSpiTxEnd(_currentSetting->spi_d);
SSP_DMACmd(_currentSetting->spi_d, SSP_DMA_TX, DISABLE);
}
uint16_t SPIClass::read() {
return SSP_ReceiveData(_currentSetting->spi_d);
}
void SPIClass::read(uint8_t *buf, uint32_t len) {
for (uint16_t i = 0; i < len; i++) buf[i] = transfer(0xFF);
}
void SPIClass::setClock(uint32_t clock) {
_currentSetting->clock = clock;
}
void SPIClass::setModule(uint8_t device) {
_currentSetting = &_settings[device - 1];// SPI channels are called 1 2 and 3 but the array is zero indexed
}
void SPIClass::setBitOrder(uint8_t bitOrder) {
_currentSetting->bitOrder = bitOrder;
}
void SPIClass::setDataMode(uint8_t dataMode) {
_currentSetting->dataSize = dataMode;
}
void SPIClass::setDataSize(uint32_t ds) {
_currentSetting->dataSize = ds;
}
/**
* Set up/tear down
*/
void SPIClass::updateSettings() {
//SSP_DeInit(_currentSetting->spi_d); //todo: need force de init?!
// divide PCLK by 2 for SSP0
CLKPWR_SetPCLKDiv(_currentSetting->spi_d == LPC_SSP0 ? CLKPWR_PCLKSEL_SSP0 : CLKPWR_PCLKSEL_SSP1, CLKPWR_PCLKSEL_CCLK_DIV_2);
SSP_CFG_Type HW_SPI_init; // data structure to hold init values
SSP_ConfigStructInit(&HW_SPI_init); // set values for SPI mode
HW_SPI_init.ClockRate = _currentSetting->clock;
HW_SPI_init.Databit = _currentSetting->dataSize;
/**
* SPI Mode CPOL CPHA Shift SCK-edge Capture SCK-edge
* 0 0 0 Falling Rising
* 1 0 1 Rising Falling
* 2 1 0 Rising Falling
* 3 1 1 Falling Rising
*/
switch (_currentSetting->dataMode) {
case SPI_MODE0:
HW_SPI_init.CPHA = SSP_CPHA_FIRST;
HW_SPI_init.CPOL = SSP_CPOL_HI;
break;
case SPI_MODE1:
HW_SPI_init.CPHA = SSP_CPHA_SECOND;
HW_SPI_init.CPOL = SSP_CPOL_HI;
break;
case SPI_MODE2:
HW_SPI_init.CPHA = SSP_CPHA_FIRST;
HW_SPI_init.CPOL = SSP_CPOL_LO;
break;
case SPI_MODE3:
HW_SPI_init.CPHA = SSP_CPHA_SECOND;
HW_SPI_init.CPOL = SSP_CPOL_LO;
break;
default:
break;
}
// TODO: handle bitOrder
SSP_Init(_currentSetting->spi_d, &HW_SPI_init); // puts the values into the proper bits in the SSP0 registers
}
#if MISO_PIN == BOARD_SPI1_MISO_PIN
SPIClass SPI(1);
#elif MISO_PIN == BOARD_SPI2_MISO_PIN
SPIClass SPI(2);
#endif
#endif // TARGET_LPC1768

11
Marlin/src/HAL/LPC1768/inc/Conditionals_LCD.h
View File

@ -21,6 +21,13 @@
*/
#pragma once
#if HAS_SPI_TFT || HAS_FSMC_TFT
#error "Sorry! TFT displays are not available for HAL/LPC1768."
#if HAS_FSMC_TFT
#error "Sorry! FSMC TFT displays are not current available for HAL/LPC1768."
#endif
// This emulated DOGM has 'touch/xpt2046', not 'tft/xpt2046'
#if ENABLED(TOUCH_SCREEN) && !HAS_GRAPHICAL_TFT
#undef TOUCH_SCREEN
#undef TOUCH_SCREEN_CALIBRATION
#define HAS_TOUCH_XPT2046 1
#endif

140
Marlin/src/HAL/LPC1768/include/SPI.h
View File

@ -24,25 +24,139 @@
#include "../../shared/HAL_SPI.h"
#include <stdint.h>
#include <lpc17xx_ssp.h>
#include <lpc17xx_gpdma.h>
#define MSBFIRST 1
#define SPI_MODE3 0
//#define MSBFIRST 1
#define SPI_MODE0 0
#define SPI_MODE1 1
#define SPI_MODE2 2
#define SPI_MODE3 3
#define DATA_SIZE_8BIT SSP_DATABIT_8
#define DATA_SIZE_16BIT SSP_DATABIT_16
#define SPI_CLOCK_DIV2 8333333 //(SCR: 2) desired: 8,000,000 actual: 8,333,333 +4.2% SPI_FULL_SPEED
#define SPI_CLOCK_DIV4 4166667 //(SCR: 5) desired: 4,000,000 actual: 4,166,667 +4.2% SPI_HALF_SPEED
#define SPI_CLOCK_DIV8 2083333 //(SCR: 11) desired: 2,000,000 actual: 2,083,333 +4.2% SPI_QUARTER_SPEED
#define SPI_CLOCK_DIV16 1000000 //(SCR: 24) desired: 1,000,000 actual: 1,000,000 SPI_EIGHTH_SPEED
#define SPI_CLOCK_DIV32 500000 //(SCR: 49) desired: 500,000 actual: 500,000 SPI_SPEED_5
#define SPI_CLOCK_DIV64 250000 //(SCR: 99) desired: 250,000 actual: 250,000 SPI_SPEED_6
#define SPI_CLOCK_DIV128 125000 //(SCR:199) desired: 125,000 actual: 125,000 Default from HAL.h
#define SPI_CLOCK_MAX SPI_CLOCK_DIV2
#define BOARD_NR_SPI 2
//#define BOARD_SPI1_NSS_PIN PA4 ?!
#define BOARD_SPI1_SCK_PIN P0_15
#define BOARD_SPI1_MISO_PIN P0_17
#define BOARD_SPI1_MOSI_PIN P0_18
//#define BOARD_SPI2_NSS_PIN PB12 ?!
#define BOARD_SPI2_SCK_PIN P0_07
#define BOARD_SPI2_MISO_PIN P0_08
#define BOARD_SPI2_MOSI_PIN P0_09
class SPISettings {
public:
SPISettings(uint32_t speed, int, int) : spi_speed(speed) {};
uint32_t spiRate() const { return spi_speed; }
private:
uint32_t spi_speed;
public:
SPISettings(uint32_t speed, int, int) : spi_speed(speed) {};
SPISettings(uint32_t inClock, uint8_t inBitOrder, uint8_t inDataMode, uint32_t inDataSize) {
if (__builtin_constant_p(inClock))
init_AlwaysInline(inClock, inBitOrder, inDataMode, inDataSize);
else
init_MightInline(inClock, inBitOrder, inDataMode, inDataSize);
}
SPISettings() {
init_AlwaysInline(4000000, MSBFIRST, SPI_MODE0, DATA_SIZE_8BIT);
}
uint32_t spiRate() const { return spi_speed; }
private:
void init_MightInline(uint32_t inClock, uint8_t inBitOrder, uint8_t inDataMode, uint32_t inDataSize) {
init_AlwaysInline(inClock, inBitOrder, inDataMode, inDataSize);
}
void init_AlwaysInline(uint32_t inClock, uint8_t inBitOrder, uint8_t inDataMode, uint32_t inDataSize) __attribute__((__always_inline__)) {
clock = inClock;
bitOrder = inBitOrder;
dataMode = inDataMode;
dataSize = inDataSize;
}
uint32_t spi_speed;
uint32_t clock;
uint32_t dataSize;
//uint32_t clockDivider;
uint8_t bitOrder;
uint8_t dataMode;
LPC_SSP_TypeDef *spi_d;
friend class SPIClass;
};
/**
* @brief Wirish SPI interface.
*
* This is the same interface is available across HAL
*
* This implementation uses software slave management, so the caller
* is responsible for controlling the slave select line.
*/
class SPIClass {
public:
void begin();
void beginTransaction(const SPISettings&);
void endTransaction() {};
uint8_t transfer(uint8_t data);
uint16_t transfer16(uint16_t data);
public:
/**
* @param spiPortNumber Number of the SPI port to manage.
*/
SPIClass(uint8_t spiPortNumber);
/**
* Select and configure the current selected SPI device to use
*/
void begin();
/**
* Disable the current SPI device
*/
void end();
void beginTransaction(const SPISettings&);
void endTransaction() {};
// Transfer using 1 "Data Size"
uint8_t transfer(uint16_t data);
// Transfer 2 bytes in 8 bit mode
uint16_t transfer16(uint16_t data);
void send(uint8_t data);
uint16_t read();
void read(uint8_t *buf, uint32_t len);
void dmaSend(void *buf, uint16_t length, bool minc);
/**
* @brief Sets the number of the SPI peripheral to be used by
* this HardwareSPI instance.
*
* @param spi_num Number of the SPI port. 1-2 in low density devices
* or 1-3 in high density devices.
*/
void setModule(uint8_t device);
void setClock(uint32_t clock);
void setBitOrder(uint8_t bitOrder);
void setDataMode(uint8_t dataMode);
void setDataSize(uint32_t ds);
inline uint32_t getDataSize() { return _currentSetting->dataSize; }
private:
SPISettings _settings[BOARD_NR_SPI];
SPISettings *_currentSetting;
void updateSettings();
};
extern SPIClass SPI;

153
Marlin/src/HAL/LPC1768/tft/tft_spi.cpp Normal file
View File

@ -0,0 +1,153 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../../../inc/MarlinConfig.h"
#if HAS_SPI_TFT
#include "tft_spi.h"
//TFT_SPI tft;
SPIClass TFT_SPI::SPIx(1);
#define TFT_CS_H WRITE(TFT_CS_PIN, HIGH)
#define TFT_CS_L WRITE(TFT_CS_PIN, LOW)
#define TFT_DC_H WRITE(TFT_DC_PIN, HIGH)
#define TFT_DC_L WRITE(TFT_DC_PIN, LOW)
#define TFT_RST_H WRITE(TFT_RESET_PIN, HIGH)
#define TFT_RST_L WRITE(TFT_RESET_PIN, LOW)
#define TFT_BLK_H WRITE(TFT_BACKLIGHT_PIN, HIGH)
#define TFT_BLK_L WRITE(TFT_BACKLIGHT_PIN, LOW)
void TFT_SPI::Init() {
#if PIN_EXISTS(TFT_RESET)
SET_OUTPUT(TFT_RESET_PIN);
TFT_RST_H;
delay(100);
#endif
#if PIN_EXISTS(TFT_BACKLIGHT)
SET_OUTPUT(TFT_BACKLIGHT_PIN);
TFT_BLK_H;
#endif
SET_OUTPUT(TFT_DC_PIN);
SET_OUTPUT(TFT_CS_PIN);
TFT_DC_H;
TFT_CS_H;
/**
* STM32F1 APB2 = 72MHz, APB1 = 36MHz, max SPI speed of this MCU if 18Mhz
* STM32F1 has 3 SPI ports, SPI1 in APB2, SPI2/SPI3 in APB1
* so the minimum prescale of SPI1 is DIV4, SPI2/SPI3 is DIV2
*/
#if 0
#if SPI_DEVICE == 1
#define SPI_CLOCK_MAX SPI_CLOCK_DIV4
#else
#define SPI_CLOCK_MAX SPI_CLOCK_DIV2
#endif
uint8_t clock;
uint8_t spiRate = SPI_FULL_SPEED;
switch (spiRate) {
case SPI_FULL_SPEED: clock = SPI_CLOCK_MAX ; break;
case SPI_HALF_SPEED: clock = SPI_CLOCK_DIV4 ; break;
case SPI_QUARTER_SPEED: clock = SPI_CLOCK_DIV8 ; break;
case SPI_EIGHTH_SPEED: clock = SPI_CLOCK_DIV16; break;
case SPI_SPEED_5: clock = SPI_CLOCK_DIV32; break;
case SPI_SPEED_6: clock = SPI_CLOCK_DIV64; break;
default: clock = SPI_CLOCK_DIV2; // Default from the SPI library
}
#endif
#if TFT_MISO_PIN == BOARD_SPI1_MISO_PIN
SPIx.setModule(1);
#elif TFT_MISO_PIN == BOARD_SPI2_MISO_PIN
SPIx.setModule(2);
#endif
SPIx.setClock(SPI_CLOCK_MAX);
SPIx.setBitOrder(MSBFIRST);
SPIx.setDataMode(SPI_MODE0);
}
void TFT_SPI::DataTransferBegin(uint16_t DataSize) {
SPIx.setDataSize(DataSize);
SPIx.begin();
TFT_CS_L;
}
uint32_t TFT_SPI::GetID() {
uint32_t id;
id = ReadID(LCD_READ_ID);
if ((id & 0xFFFF) == 0 || (id & 0xFFFF) == 0xFFFF)
id = ReadID(LCD_READ_ID4);
return id;
}
uint32_t TFT_SPI::ReadID(uint16_t Reg) {
uint32_t data = 0;
#if PIN_EXISTS(TFT_MISO)
uint8_t d = 0;
SPIx.setDataSize(DATASIZE_8BIT);
SPIx.setClock(SPI_CLOCK_DIV64);
SPIx.begin();
TFT_CS_L;
WriteReg(Reg);
LOOP_L_N(i, 4) {
SPIx.read((uint8_t*)&d, 1);
data = (data << 8) | d;
}
DataTransferEnd();
SPIx.setClock(SPI_CLOCK_MAX);
#endif
return data >> 7;
}
bool TFT_SPI::isBusy() {
return false;
}
void TFT_SPI::Abort() {
DataTransferEnd();
}
void TFT_SPI::Transmit(uint16_t Data) {
SPIx.transfer(Data);
}
void TFT_SPI::TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count) {
DataTransferBegin(DATASIZE_16BIT); //16
TFT_DC_H;
SPIx.dmaSend(Data, Count, MemoryIncrease);
DataTransferEnd();
}
#endif // HAS_SPI_TFT

77
Marlin/src/HAL/LPC1768/tft/tft_spi.h Normal file
View File

@ -0,0 +1,77 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "../../../inc/MarlinConfig.h"
#include <SPI.h>
#include <lpc17xx_ssp.h>
// #include <lpc17xx_gpdma.h>
#ifndef LCD_READ_ID
#define LCD_READ_ID 0x04 // Read display identification information (0xD3 on ILI9341)
#endif
#ifndef LCD_READ_ID4
#define LCD_READ_ID4 0xD3 // Read display identification information (0xD3 on ILI9341)
#endif
#define DATASIZE_8BIT SSP_DATABIT_8
#define DATASIZE_16BIT SSP_DATABIT_16
#define TFT_IO TFT_SPI
#define DMA_MINC_ENABLE 1
#define DMA_MINC_DISABLE 0
class TFT_SPI {
private:
static uint32_t ReadID(uint16_t Reg);
static void Transmit(uint16_t Data);
static void TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count);
public:
static SPIClass SPIx;
static void Init();
static uint32_t GetID();
static bool isBusy();
static void Abort();
static void DataTransferBegin(uint16_t DataWidth = DATASIZE_16BIT);
static void DataTransferEnd() { OUT_WRITE(TFT_CS_PIN, HIGH); SPIx.end(); };
static void DataTransferAbort();
static void WriteData(uint16_t Data) { Transmit(Data); }
static void WriteReg(uint16_t Reg) { OUT_WRITE(TFT_A0_PIN, LOW); Transmit(Reg); OUT_WRITE(TFT_A0_PIN, HIGH); }
static void WriteSequence(uint16_t *Data, uint16_t Count) { TransmitDMA(DMA_MINC_ENABLE, Data, Count); }
// static void WriteMultiple(uint16_t Color, uint16_t Count) { static uint16_t Data; Data = Color; TransmitDMA(DMA_MINC_DISABLE, &Data, Count); }
static void WriteMultiple(uint16_t Color, uint32_t Count) {
static uint16_t Data; Data = Color;
//LPC dma can only write 0xFFF bytes at once.
#define MAX_DMA_SIZE (0xFFF - 1)
while (Count > 0) {
TransmitDMA(DMA_MINC_DISABLE, &Data, Count > MAX_DMA_SIZE ? MAX_DMA_SIZE : Count);
Count = Count > MAX_DMA_SIZE ? Count - MAX_DMA_SIZE : 0;
}
#undef MAX_DMA_SIZE
}
};

129
Marlin/src/HAL/LPC1768/tft/xpt2046.cpp Normal file
View File

@ -0,0 +1,129 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../../../inc/MarlinConfig.h"
#if HAS_TFT_XPT2046 || HAS_TOUCH_XPT2046
#include "xpt2046.h"
#include <SPI.h>
uint16_t delta(uint16_t a, uint16_t b) { return a > b ? a - b : b - a; }
#if ENABLED(TOUCH_BUTTONS_HW_SPI)
#include <SPI.h>
SPIClass XPT2046::SPIx(TOUCH_BUTTONS_HW_SPI_DEVICE);
static void touch_spi_init(uint8_t spiRate) {
XPT2046::SPIx.setModule(TOUCH_BUTTONS_HW_SPI_DEVICE);
XPT2046::SPIx.setClock(SPI_CLOCK_DIV128);
XPT2046::SPIx.setBitOrder(MSBFIRST);
XPT2046::SPIx.setDataMode(SPI_MODE0);
XPT2046::SPIx.setDataSize(DATA_SIZE_8BIT);
}
#endif
void XPT2046::Init() {
SET_INPUT(TOUCH_MISO_PIN);
SET_OUTPUT(TOUCH_MOSI_PIN);
SET_OUTPUT(TOUCH_SCK_PIN);
OUT_WRITE(TOUCH_CS_PIN, HIGH);
#if PIN_EXISTS(TOUCH_INT)
// Optional Pendrive interrupt pin
SET_INPUT(TOUCH_INT_PIN);
#endif
TERN_(TOUCH_BUTTONS_HW_SPI, touch_spi_init(SPI_SPEED_6));
// Read once to enable pendrive status pin
getRawData(XPT2046_X);
}
bool XPT2046::isTouched() {
return isBusy() ? false : (
#if PIN_EXISTS(TOUCH_INT)
READ(TOUCH_INT_PIN) != HIGH
#else
getRawData(XPT2046_Z1) >= XPT2046_Z1_THRESHOLD
#endif
);
}
bool XPT2046::getRawPoint(int16_t *x, int16_t *y) {
if (isBusy()) return false;
if (!isTouched()) return false;
*x = getRawData(XPT2046_X);
*y = getRawData(XPT2046_Y);
SERIAL_ECHOLNPAIR("X: ", *x, ", Y: ", *y);
return isTouched();
}
uint16_t XPT2046::getRawData(const XPTCoordinate coordinate) {
uint16_t data[3];
DataTransferBegin();
TERN_(TOUCH_BUTTONS_HW_SPI, SPIx.begin());
for (uint16_t i = 0; i < 3 ; i++) {
IO(coordinate);
data[i] = (IO() << 4) | (IO() >> 4);
}
TERN_(TOUCH_BUTTONS_HW_SPI, SPIx.end());
DataTransferEnd();
uint16_t delta01 = delta(data[0], data[1]),
delta02 = delta(data[0], data[2]),
delta12 = delta(data[1], data[2]);
if (delta01 > delta02 || delta01 > delta12)
data[delta02 > delta12 ? 0 : 1] = data[2];
return (data[0] + data[1]) >> 1;
}
uint16_t XPT2046::IO(uint16_t data) {
return TERN(TOUCH_BUTTONS_HW_SPI, HardwareIO, SoftwareIO)(data);
}
extern uint8_t spiTransfer(uint8_t b);
#if ENABLED(TOUCH_BUTTONS_HW_SPI)
uint16_t XPT2046::HardwareIO(uint16_t data) {
return SPIx.transfer(data & 0xFF);
}
#endif
uint16_t XPT2046::SoftwareIO(uint16_t data) {
uint16_t result = 0;
for (uint8_t j = 0x80; j; j >>= 1) {
WRITE(TOUCH_SCK_PIN, LOW);
WRITE(TOUCH_MOSI_PIN, data & j ? HIGH : LOW);
if (READ(TOUCH_MISO_PIN)) result |= j;
WRITE(TOUCH_SCK_PIN, HIGH);
}
WRITE(TOUCH_SCK_PIN, LOW);
return result;
}
#endif // HAS_TFT_XPT2046

80
Marlin/src/HAL/LPC1768/tft/xpt2046.h Normal file
View File

@ -0,0 +1,80 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "../../../inc/MarlinConfig.h"
#if ENABLED(TOUCH_BUTTONS_HW_SPI)
#include <SPI.h>
#endif
#ifndef TOUCH_MISO_PIN
#define TOUCH_MISO_PIN MISO_PIN
#endif
#ifndef TOUCH_MOSI_PIN
#define TOUCH_MOSI_PIN MOSI_PIN
#endif
#ifndef TOUCH_SCK_PIN
#define TOUCH_SCK_PIN SCK_PIN
#endif
#ifndef TOUCH_CS_PIN
#define TOUCH_CS_PIN CS_PIN
#endif
#ifndef TOUCH_INT_PIN
#define TOUCH_INT_PIN -1
#endif
#define XPT2046_DFR_MODE 0x00
#define XPT2046_SER_MODE 0x04
#define XPT2046_CONTROL 0x80
enum XPTCoordinate : uint8_t {
XPT2046_X = 0x10 | XPT2046_CONTROL | XPT2046_DFR_MODE,
XPT2046_Y = 0x50 | XPT2046_CONTROL | XPT2046_DFR_MODE,
XPT2046_Z1 = 0x30 | XPT2046_CONTROL | XPT2046_DFR_MODE,
XPT2046_Z2 = 0x40 | XPT2046_CONTROL | XPT2046_DFR_MODE,
};
#if !defined(XPT2046_Z1_THRESHOLD)
#define XPT2046_Z1_THRESHOLD 10
#endif
class XPT2046 {
private:
static bool isBusy() { return false; }
static uint16_t getRawData(const XPTCoordinate coordinate);
static bool isTouched();
static inline void DataTransferBegin() { WRITE(TOUCH_CS_PIN, LOW); };
static inline void DataTransferEnd() { WRITE(TOUCH_CS_PIN, HIGH); };
#if ENABLED(TOUCH_BUTTONS_HW_SPI)
static uint16_t HardwareIO(uint16_t data);
#endif
static uint16_t SoftwareIO(uint16_t data);
static uint16_t IO(uint16_t data = 0);
public:
#if ENABLED(TOUCH_BUTTONS_HW_SPI)
static SPIClass SPIx;
#endif
static void Init();
static bool getRawPoint(int16_t *x, int16_t *y);
};

10
Marlin/src/lcd/dogm/HAL_LCD_com_defines.h
View File

@ -82,11 +82,6 @@
#define U8G_COM_SSD_I2C_HAL u8g_com_arduino_ssd_i2c_fn
#if EITHER(FSMC_GRAPHICAL_TFT, SPI_GRAPHICAL_TFT)
uint8_t u8g_com_stm32duino_tft_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
#define U8G_COM_HAL_TFT_FN u8g_com_stm32duino_tft_fn
#endif
#elif defined(TARGET_LPC1768)
uint8_t u8g_com_HAL_LPC1768_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
@ -117,6 +112,9 @@
#ifndef U8G_COM_SSD_I2C_HAL
#define U8G_COM_SSD_I2C_HAL u8g_com_null_fn
#endif
#ifndef U8G_COM_HAL_TFT_FN
#if EITHER(FSMC_GRAPHICAL_TFT, SPI_GRAPHICAL_TFT)
uint8_t u8g_com_hal_tft_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
#define U8G_COM_HAL_TFT_FN u8g_com_hal_tft_fn
#else
#define U8G_COM_HAL_TFT_FN u8g_com_null_fn
#endif

4
Marlin/src/lcd/dogm/u8g_dev_tft_320x240_upscale_from_128x64.cpp
View File

@ -760,7 +760,7 @@ uint8_t u8g_dev_tft_320x240_upscale_from_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, u
static uint8_t msgInitCount = 2; // Ignore all messages until 2nd U8G_COM_MSG_INIT
uint8_t u8g_com_stm32duino_tft_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
uint8_t u8g_com_hal_tft_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
if (msgInitCount) {
if (msg == U8G_COM_MSG_INIT) msgInitCount--;
if (msgInitCount) return -1;
@ -801,7 +801,7 @@ uint8_t u8g_com_stm32duino_tft_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void
break;
case U8G_COM_MSG_WRITE_SEQ:
tftio.DataTransferBegin(DATASIZE_8BIT);
tftio.DataTransferBegin(DATASIZE_16BIT);
for (uint8_t i = 0; i < arg_val; i += 2)
tftio.WriteData(*(uint16_t *)(((uint32_t)arg_ptr) + i));
tftio.DataTransferEnd();

32
Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h
View File

@ -274,6 +274,38 @@
#define FORCE_SOFT_SPI
#define LCD_BACKLIGHT_PIN -1
#elif HAS_SPI_TFT // Config for Classic UI (emulated DOGM) and Color UI
#define SS_PIN -1
//#define ONBOARD_SD_CS_PIN -1
#define TFT_CS_PIN P1_22
#define TFT_A0_PIN P1_23
#define TFT_DC_PIN P1_23
#define TFT_MISO_PIN P0_17
#define TFT_BACKLIGHT_PIN P1_18
#define TFT_RESET_PIN P1_19
#define LPC_HW_SPI_DEV 0
#define LCD_USE_DMA_SPI
#define TOUCH_INT_PIN P1_21
#define TOUCH_CS_PIN P1_20
#define TOUCH_BUTTONS_HW_SPI
#define TOUCH_BUTTONS_HW_SPI_DEVICE 1
#ifndef GRAPHICAL_TFT_UPSCALE
#define GRAPHICAL_TFT_UPSCALE 3
#endif
// SPI 1
#define SCK_PIN P0_15
#define MISO_PIN P0_17
#define MOSI_PIN P0_18
// Disable any LCD related PINs config
#define LCD_PINS_ENABLE -1
#define LCD_PINS_RS -1
#else
#define BTN_ENC P0_28 // (58) open-drain

19
Marlin/src/pins/pinsDebug_list.h
View File

@ -1421,3 +1421,22 @@
#if PIN_EXISTS(ESP_WIFI_MODULE_GPIO2)
REPORT_NAME_DIGITAL(__LINE__, ESP_WIFI_MODULE_GPIO2_PIN)
#endif
// TFT PINS
#if PIN_EXISTS(TFT_CS)
REPORT_NAME_DIGITAL(__LINE__, TFT_CS_PIN)
#endif
#if PIN_EXISTS(TFT_A0)
REPORT_NAME_DIGITAL(__LINE__, TFT_A0_PIN)
#endif
#if PIN_EXISTS(TFT_DC)
REPORT_NAME_DIGITAL(__LINE__, TFT_DC_PIN)
#endif
#if PIN_EXISTS(TFT_MISO)
REPORT_NAME_DIGITAL(__LINE__, TFT_MISO_PIN)
#endif
#if PIN_EXISTS(TFT_BACKLIGHT)
REPORT_NAME_DIGITAL(__LINE__, TFT_BACKLIGHT_PIN)
#endif
#if PIN_EXISTS(TFT_RESET)
REPORT_NAME_DIGITAL(__LINE__, TFT_RESET_PIN)
#endif