diff --git a/Marlin/src/gcode/calibrate/G425.cpp b/Marlin/src/gcode/calibrate/G425.cpp
index 42c56fe51d..6ac3c70c48 100644
--- a/Marlin/src/gcode/calibrate/G425.cpp
+++ b/Marlin/src/gcode/calibrate/G425.cpp
@@ -51,7 +51,6 @@
   #undef CALIBRATION_MEASURE_AT_TOP_EDGES
 #endif
 
-
 /**
  * G425 backs away from the calibration object by various distances
  * depending on the confidence level:
@@ -256,7 +255,7 @@ inline void probe_side(measurements_t &m, const float uncertainty, const side_t
     #endif
   }
 
-  if (AXIS_CAN_CALIBRATE(X) && axis == X_AXIS || AXIS_CAN_CALIBRATE(Y) && axis == Y_AXIS) {
+  if ((AXIS_CAN_CALIBRATE(X) && axis == X_AXIS) || (AXIS_CAN_CALIBRATE(Y) && axis == Y_AXIS)) {
     // Move to safe distance to the side of the calibration object
     current_position[axis] = m.obj_center[axis] + (-dir) * (dimensions[axis] / 2 + m.nozzle_outer_dimension[axis] / 2 + uncertainty);
     calibration_move();
diff --git a/Marlin/src/gcode/calibrate/M425.cpp b/Marlin/src/gcode/calibrate/M425.cpp
index 980152a4b1..c2a57686cf 100644
--- a/Marlin/src/gcode/calibrate/M425.cpp
+++ b/Marlin/src/gcode/calibrate/M425.cpp
@@ -46,8 +46,17 @@
 void GcodeSuite::M425() {
   bool noArgs = true;
 
+  auto axis_can_calibrate = [](const uint8_t a) {
+    switch (a) {
+      default:
+      case X_AXIS: return AXIS_CAN_CALIBRATE(X);
+      case Y_AXIS: return AXIS_CAN_CALIBRATE(Y);
+      case Z_AXIS: return AXIS_CAN_CALIBRATE(Z);
+    }
+  };
+
   LOOP_XYZ(a) {
-    if (CAN_CALIBRATE(a) && parser.seen(XYZ_CHAR(a))) {
+    if (AXIS_CAN_CALIBRATE(a) && parser.seen(XYZ_CHAR(a))) {
       planner.synchronize();
       backlash.distance_mm[a] = parser.has_value() ? parser.value_linear_units() : backlash.get_measurement(AxisEnum(a));
       noArgs = false;
@@ -74,7 +83,7 @@ void GcodeSuite::M425() {
     SERIAL_ECHOLNPGM("active:");
     SERIAL_ECHOLNPAIR("  Correction Amount/Fade-out:     F", backlash.get_correction(), " (F1.0 = full, F0.0 = none)");
     SERIAL_ECHOPGM("  Backlash Distance (mm):        ");
-    LOOP_XYZ(a) if (CAN_CALIBRATE(a)) {
+    LOOP_XYZ(a) if (axis_can_calibrate(a)) {
       SERIAL_CHAR(' ', XYZ_CHAR(a));
       SERIAL_ECHO(backlash.distance_mm[a]);
       SERIAL_EOL();
@@ -87,7 +96,7 @@ void GcodeSuite::M425() {
     #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING)
       SERIAL_ECHOPGM("  Average measured backlash (mm):");
       if (backlash.has_any_measurement()) {
-        LOOP_XYZ(a) if (CAN_CALIBRATE(a) && backlash.has_measurement(AxisEnum(a))) {
+        LOOP_XYZ(a) if (axis_can_calibrate(a) && backlash.has_measurement(AxisEnum(a))) {
           SERIAL_CHAR(' ', XYZ_CHAR(a));
           SERIAL_ECHO(backlash.get_measurement(AxisEnum(a)));
         }
diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h
index b28b27792d..ee41c4af67 100644
--- a/Marlin/src/inc/Conditionals_post.h
+++ b/Marlin/src/inc/Conditionals_post.h
@@ -147,7 +147,7 @@
     #define Z_AXIS_INDEX 2
     #define CAN_CALIBRATE(A,B) (A##_AXIS_INDEX == B##_INDEX)
   #else
-    #define CAN_CALIBRATE(...) 1
+    #define CAN_CALIBRATE(A,B) 1
   #endif
 #endif
 #define AXIS_CAN_CALIBRATE(A) CAN_CALIBRATE(A,NORMAL_AXIS)