📺 MKS MINI12864 V3 for Robin E3P, etc. (#22453)

Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h

@@ -41,7 +41,7 @@
 #define BOARD_NO_NATIVE_USB
 
 // Avoid conflict with TIMER_SERVO when using the STM32 HAL
-#define TEMP_TIMER 5
+#define TEMP_TIMER                             5
 
 //
 // Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
@@ -65,7 +65,7 @@
 #define SD_SCK_PIN                          PB13  // SPI2
 #define SD_MISO_PIN                         PB14  // SPI2
 #define SD_MOSI_PIN                         PB15  // SPI2
-#define SPI_DEVICE 2
+#define SPI_DEVICE                             2
 
 // SPI Flash
 #define HAS_SPI_FLASH                          1

Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h

@@ -38,6 +38,9 @@
 #define BOARD_NO_NATIVE_USB
 #define MKS_HARDWARE_TEST_ONLY_E0
 
+// Avoid conflict with TIMER_SERVO when using the STM32 HAL
+#define TEMP_TIMER                             5
+
 //
 // Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
 //
@@ -214,17 +217,23 @@
   #define SDCARD_CONNECTION              ONBOARD
 #endif
 
-#define SDIO_SUPPORT
-#define SDIO_CLOCK                       4500000  // 4.5 MHz
-#define SD_DETECT_PIN                       PD12
-#define ONBOARD_SD_CS_PIN                   PC11
+#if SD_CONNECTION_IS(ONBOARD)
+  #define SDIO_SUPPORT
+  #define SDIO_CLOCK                     4500000  // 4.5 MHz
+  #define SD_DETECT_PIN                     PD12
+  #define ONBOARD_SD_CS_PIN                 PC11
+#elif SD_CONNECTION_IS(LCD)
+  #define ENABLE_SPI1
+  #define SDSS                              PE10
+  #define SD_SCK_PIN                        PA5
+  #define SD_MISO_PIN                       PA6
+  #define SD_MOSI_PIN                       PA7
+  #define SD_DETECT_PIN                     PE12
+#endif
 
 //
 // LCD / Controller
 //
-#ifndef BEEPER_PIN
-  #define BEEPER_PIN                        PC5
-#endif
 
 /**
  * Note: MKS Robin TFT screens use various TFT controllers.
@@ -261,33 +270,29 @@
   #define TOUCH_BUTTONS_HW_SPI
   #define TOUCH_BUTTONS_HW_SPI_DEVICE          1
 
-  #ifndef TFT_WIDTH
-    #define TFT_WIDTH                        480
-  #endif
-  #ifndef TFT_HEIGHT
-    #define TFT_HEIGHT                       320
-  #endif
-
-  #define LCD_READ_ID                       0xD3
   #define LCD_USE_DMA_SPI
 
 #endif
 
-#if HAS_SPI_GRAPHICAL_TFT
+#if ENABLED(TFT_CLASSIC_UI)
   // Emulated DOGM SPI
   #define LCD_PINS_ENABLE                   PD13
   #define LCD_PINS_RS                       PC6
   #define BTN_ENC                           PE13
   #define BTN_EN1                           PE8
   #define BTN_EN2                           PE11
-#elif ENABLED(TFT_480x320_SPI)
-  #define TFT_DRIVER                      ST7796
+#elif ENABLED(TFT_COLOR_UI)
   #define TFT_BUFFER_SIZE                  14400
 #endif
 
 #if HAS_WIRED_LCD && !HAS_SPI_TFT
-
-  // NON TFT Displays
+  #define BEEPER_PIN                        PC5
+  #define BTN_ENC                           PE13
+  #define LCD_PINS_ENABLE                   PD13
+  #define LCD_PINS_RS                       PC6
+  #define BTN_EN1                           PE8
+  #define BTN_EN2                           PE11
+  #define LCD_BACKLIGHT_PIN                 -1
 
   #if ENABLED(MKS_MINI_12864)
 
@@ -301,9 +306,32 @@
     #define DOGLCD_SCK                      PA5
     #define DOGLCD_MOSI                     PA7
 
-    // Required for MKS_MINI_12864 with this board
-    #define MKS_LCD12864B
-    #undef SHOW_BOOTSCREEN
+  #elif IS_TFTGLCD_PANEL
+
+    #if ENABLED(TFTGLCD_PANEL_SPI)
+      #define PIN_SPI_SCK                   PA5
+      #define PIN_TFT_MISO                  PA6
+      #define PIN_TFT_MOSI                  PA7
+      #define TFTGLCD_CS                    PE8
+    #endif
+
+    #ifndef BEEPER_PIN
+      #define BEEPER_PIN                    -1
+    #endif
+
+  #elif ENABLED(MKS_MINI_12864_V3)
+    #define DOGLCD_CS                       PD13
+    #define DOGLCD_A0                       PC6
+    #define LCD_PINS_DC                DOGLCD_A0
+    #define LCD_BACKLIGHT_PIN               -1
+    #define LCD_RESET_PIN                   PE14
+    #define NEOPIXEL_PIN                    PE15
+    #define DOGLCD_MOSI                     PA7
+    #define DOGLCD_SCK                      PA5
+    #if SD_CONNECTION_IS(ONBOARD)
+      #define FORCE_SOFT_SPI
+    #endif
+	//#define LCD_SCREEN_ROT_180
 
   #else                                           // !MKS_MINI_12864
 
@@ -342,6 +370,10 @@
   #define W25QXX_SCK_PIN                    PB13
 #endif
 
+#ifndef BEEPER_PIN
+  #define BEEPER_PIN                        PC5
+#endif
+
 #if ENABLED(SPEAKER) && BEEPER_PIN == PC5
   #error "MKS Robin nano default BEEPER_PIN is not a SPEAKER."
 #endif

Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h

@@ -166,6 +166,7 @@
     #define DOGLCD_SCK                      PB13
     #define FORCE_SOFT_SPI
     #define SOFTWARE_SPI
+	//#define LCD_SCREEN_ROT_180
 
   #else
 

Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h

@@ -37,7 +37,7 @@
 #define BOARD_NO_NATIVE_USB
 
 // Avoid conflict with TIMER_SERVO when using the STM32 HAL
-#define TEMP_TIMER 5
+#define TEMP_TIMER                             5
 
 //
 // Release PB4 (Y_ENABLE_PIN) from JTAG NRST role

Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h

@@ -38,7 +38,7 @@
 #define BOARD_NO_NATIVE_USB
 
 // Avoid conflict with TIMER_SERVO when using the STM32 HAL
-#define TEMP_TIMER 5
+#define TEMP_TIMER                             5
 
 //
 // Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
@@ -345,6 +345,7 @@
     #if SD_CONNECTION_IS(ONBOARD)
       #define FORCE_SOFT_SPI
     #endif
+	//#define LCD_SCREEN_ROT_180
 
   #else                                           // !MKS_MINI_12864