bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Improve opt_set (etc.) used for tests

Browse Source
This commit is contained in:
Scott Lahteine
2021-03-03 00:15:56 -06:00
parent 0afa4cc957
commit 369ffe518d
41 changed files with 229 additions and 475 deletions
Download Patch File Download Diff File Expand all files Collapse all files

23
buildroot/tests/LPC1768-tests
View File

@ -14,9 +14,8 @@ set -e
#exec_test $1 $2 "Default Configuration" "$3"
restore_configs
opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EFB
opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EFB NEOPIXEL_PIN P1_16
opt_enable VIKI2 SDSUPPORT SDCARD_READONLY SERIAL_PORT_2 NEOPIXEL_LED
opt_set NEOPIXEL_PIN P1_16
exec_test $1 $2 "ReARM EFB VIKI2, SDSUPPORT, 2 Serial ports (USB CDC + UART0), NeoPixel" "$3"
#restore_configs
@ -24,19 +23,18 @@ exec_test $1 $2 "ReARM EFB VIKI2, SDSUPPORT, 2 Serial ports (USB CDC + UART0), N
#exec_test $1 $2 "MKS SBASE Example Config" "$3"
restore_configs
opt_set MOTHERBOARD BOARD_MKS_SBASE
opt_set EXTRUDERS 2
opt_set TEMP_SENSOR_1 1
opt_set NUM_SERVOS 2
opt_set SERVO_DELAY "{ 300, 300 }"
opt_set MOTHERBOARD BOARD_MKS_SBASE \
EXTRUDERS 2 TEMP_SENSOR_1 1 \
NUM_SERVOS 2 SERVO_DELAY '{ 300, 300 }'
opt_enable SWITCHING_NOZZLE SWITCHING_NOZZLE_E1_SERVO_NR ULTIMAKERCONTROLLER
exec_test $1 $2 "MKS SBASE with SWITCHING_NOZZLE" "$3"
restore_configs
opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EEB
opt_set EXTRUDERS 2
opt_set TEMP_SENSOR_1 -1
opt_set TEMP_SENSOR_BED 5
opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EEB \
EXTRUDERS 2 TEMP_SENSOR_1 -1 TEMP_SENSOR_BED 5 \
GRID_MAX_POINTS_X 16 \
NOZZLE_TO_PROBE_OFFSET '{ 0, 0, 0 }' \
NOZZLE_CLEAN_MIN_TEMP 170
opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER ADAPTIVE_FAN_SLOWING NO_FAN_SLOWING_IN_PID_TUNING \
FILAMENT_WIDTH_SENSOR FILAMENT_LCD_DISPLAY PID_EXTRUSION_SCALING SOUND_MENU_ITEM \
NOZZLE_AS_PROBE AUTO_BED_LEVELING_BILINEAR PREHEAT_BEFORE_LEVELING G29_RETRY_AND_RECOVER Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
@ -46,9 +44,6 @@ opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER ADAPTIVE_FAN_SLOWING NO
HOST_KEEPALIVE_FEATURE HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT \
LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES \
SDSUPPORT SDCARD_SORT_ALPHA AUTO_REPORT_SD_STATUS EMERGENCY_PARSER
opt_set GRID_MAX_POINTS_X 16
opt_set NOZZLE_TO_PROBE_OFFSET "{ 0, 0, 0 }"
opt_set NOZZLE_CLEAN_MIN_TEMP 170
exec_test $1 $2 "Re-ARM with NOZZLE_AS_PROBE and many features." "$3"
# clean up