bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

🔧 Sanity-check BLTOUCH_SET_5V_MODE on 5V pins (#22840)

Browse Source 
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
This commit is contained in:
ellensp 2021-09-28 04:17:00 +13:00 committed by Scott Lahteine
parent 060b705dab
commit 34c9f64925
1 changed files with 26 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

28
Marlin/src/inc/SanityCheck.h
View File

@ -1529,10 +1529,34 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#endif
#if ENABLED(BLTOUCH)
// BLTouch can't run in 5V mode with a 3.3V probe pin
#if ENABLED(BLTOUCH_SET_5V_MODE)
#define _5V(P,A,B) WITHIN(P,A,B)
#ifdef STM32F1 // STM32F103 5V-tolerant pins
#define _IS_5V_TOLERANT(P) (_5V(P,PA8,PA15) || _5V(P,PB2,PB15) || _5V(P,PC6,PC12) || _5V(P,PD0,PD15) || _5V(P,PE0,PE15) || _5V(P,PF0,PF5) || _5V(P,PF11,PF15))
#elif defined(ARDUINO_ARCH_SAM)
#define _IS_5V_TOLERANT(P) 0 // Assume no 5V tolerance
#else
#define _IS_5V_TOLERANT(P) 1 // Assume 5V tolerance
#endif
#if USES_Z_MIN_PROBE_PIN && !_IS_5V_TOLERANT(Z_MIN_PROBE_PIN)
#error "BLTOUCH_SET_5V_MODE is not compatible with the Z_MIN_PROBE_PIN."
#elif !_IS_5V_TOLERANT(Z_MIN_PIN)
#error "BLTOUCH_SET_5V_MODE is not compatible with the Z_MIN_PIN."
#endif
#undef _IS_5V_TOLERANT
#undef _5V
#elif NONE(ONBOARD_ENDSTOPPULLUPS, ENDSTOPPULLUPS, ENDSTOPPULLUP_ZMIN, ENDSTOPPULLUP_ZMIN_PROBE)
#if USES_Z_MIN_PROBE_PIN
#error "BLTOUCH on Z_MIN_PROBE_PIN requires ENDSTOPPULLUP_ZMIN_PROBE, ENDSTOPPULLUPS, or BLTOUCH_SET_5V_MODE."
#else
#error "BLTOUCH on Z_MIN_PIN requires ENDSTOPPULLUP_ZMIN, ENDSTOPPULLUPS, or BLTOUCH_SET_5V_MODE."
#endif
#endif
#if BLTOUCH_DELAY < 200
#error "BLTOUCH_DELAY less than 200 is unsafe and is not supported."
#elif DISABLED(BLTOUCH_SET_5V_MODE) && NONE(ONBOARD_ENDSTOPPULLUPS, ENDSTOPPULLUPS, ENDSTOPPULLUP_ZMIN, ENDSTOPPULLUP_ZMIN_PROBE)
#error "BLTOUCH without BLTOUCH_SET_5V_MODE requires ENDSTOPPULLUPS, ENDSTOPPULLUP_ZMIN or ENDSTOPPULLUP_ZMIN_PROBE."
#endif
#endif