bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Move M3-M5 to cpp

Browse Source
This commit is contained in:
Scott Lahteine
2017-09-16 01:07:00 -05:00
parent 04583d46af
commit 33e00b6cd6
3 changed files with 18 additions and 19 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
Marlin/src/Marlin.cpp
View File

@@ -357,10 +357,6 @@ void suicide() {
***************** GCode Handlers *****************
**************************************************/
#if ENABLED(SPINDLE_LASER_ENABLE)
#include "gcode/control/M3-M5.h"
#endif
#include "gcode/control/M17.h"
#if ENABLED(ADVANCED_PAUSE_FEATURE)

13
Marlin/src/gcode/control/M3-M5.h → Marlin/src/gcode/control/M3-M5.cpp
View File

@@ -20,6 +20,13 @@
*
*/
#include "../../inc/MarlinConfig.h"
#if ENABLED(SPINDLE_LASER_ENABLE)
#include "../gcode.h"
#include "../../module/stepper.h"
/**
* M3: Spindle Clockwise
* M4: Spindle Counter-clockwise
@@ -70,7 +77,7 @@ inline void ocr_val_mode() {
analogWrite(SPINDLE_LASER_PWM_PIN, spindle_laser_power);
}
void gcode_M3_M4(bool is_M3) {
void GcodeSuite::M3_M4(bool is_M3) {
stepper.synchronize(); // wait until previous movement commands (G0/G0/G2/G3) have completed before playing with the spindle
#if SPINDLE_DIR_CHANGE
@@ -120,8 +127,10 @@ void gcode_M3_M4(bool is_M3) {
/**
* M5 turn off spindle
*/
void gcode_M5() {
void GcodeSuite::M5() {
stepper.synchronize();
WRITE(SPINDLE_LASER_ENABLE_PIN, !SPINDLE_LASER_ENABLE_INVERT);
delay_for_power_down();
}
#endif // SPINDLE_LASER_ENABLE

16
Marlin/src/gcode/gcode.cpp
View File

@@ -116,8 +116,6 @@ void GcodeSuite::dwell(millis_t time) {
//
// Placeholders for non-migrated codes
//
extern void gcode_M3_M4(bool is_M3);
extern void gcode_M5();
extern void gcode_M17();
extern void gcode_M18_M84();
extern void gcode_M20();
@@ -417,16 +415,12 @@ void GcodeSuite::process_next_command() {
#endif // ULTIPANEL
#if ENABLED(SPINDLE_LASER_ENABLE)
case 3:
gcode_M3_M4(true); // M3: turn spindle/laser on, set laser/spindle power/speed, set rotation direction CW
break; // synchronizes with movement commands
case 4:
gcode_M3_M4(false); // M4: turn spindle/laser on, set laser/spindle power/speed, set rotation direction CCW
break; // synchronizes with movement commands
case 5:
gcode_M5(); // M5 - turn spindle/laser off
break; // synchronizes with movement commands
// These synchronize with movement commands...
case 3: M3_M4(true ); break; // M3: turn spindle/laser on, set laser/spindle power/speed, set rotation direction CW
case 4: M3_M4(false); break; // M4: turn spindle/laser on, set laser/spindle power/speed, set rotation direction CCW
case 5: M5(); break; // M5 - turn spindle/laser off
#endif
case 17: // M17: Enable all stepper motors
gcode_M17();
break;