bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

✨ Creality3D v4.2.5 / CR200B (#24491)

Browse Source
This commit is contained in:
Victor Oliveira
2022-07-14 03:30:00 -03:00
committed by Scott Lahteine
parent 4a6ad1c98b
commit 3315f6faa4
4 changed files with 176 additions and 58 deletions
Download Patch File Download Diff File Expand all files Collapse all files

108
Marlin/src/pins/stm32f1/pins_CREALITY_V4.h
View File

@ -77,8 +77,12 @@
//
// Limit Switches
//
#define X_STOP_PIN PA5
#define Y_STOP_PIN PA6
#ifndef X_STOP_PIN
#define X_STOP_PIN PA5
#endif
#ifndef Y_STOP_PIN
#define Y_STOP_PIN PA6
#endif
#ifndef Z_STOP_PIN
#define Z_STOP_PIN PA7
#endif
@ -153,7 +157,7 @@
// SD Card
//
#define SD_DETECT_PIN PC7
#define SDCARD_CONNECTION ONBOARD
#define SDCARD_CONNECTION ONBOARD
#define SDIO_SUPPORT
#define NO_SD_HOST_DRIVE // This board's SD is only seen by the printer
@ -161,53 +165,87 @@
#if ENABLED(RET6_12864_LCD)
// RET6 12864 LCD
#define LCD_PINS_RS PB12
#define LCD_PINS_ENABLE PB15
#define LCD_PINS_D4 PB13
#define BTN_ENC PB2
#define BTN_EN1 PB10
#define BTN_EN2 PB14
/**
* RET6 12864 LCD
* ------
* PC6 |10 9 | PB2
* PB10 | 8 7 | PE8
* PB14 6 5 | PB13
* PB12 | 4 3 | PB15
* GND | 2 1 | 5V
* ------
* EXP1
*/
#define EXP1_03_PIN PB15
#define EXP1_04_PIN PB12
#define EXP1_05_PIN PB13
#define EXP1_06_PIN PB14
#define EXP1_07_PIN PE8
#define EXP1_08_PIN PB10
#define EXP1_09_PIN PB2
#define EXP1_10_PIN PC6
#ifndef HAS_PIN_27_BOARD
#define BEEPER_PIN PC6
#define BEEPER_PIN EXP1_10_PIN
#endif
#elif ENABLED(VET6_12864_LCD)
// VET6 12864 LCD
#define LCD_PINS_RS PA4
#define LCD_PINS_ENABLE PA7
#define LCD_PINS_D4 PA5
#define BTN_ENC PC5
#define BTN_EN1 PB10
#define BTN_EN2 PA6
/**
* VET6 12864 LCD
* ------
* ? |10 9 | PC5
* PB10 | 8 7 | ?
* PA6 6 5 | PA5
* PA4 | 4 3 | PA7
* GND | 2 1 | 5V
* ------
* EXP1
*/
#define EXP1_03_PIN PA7
#define EXP1_04_PIN PA4
#define EXP1_05_PIN PA5
#define EXP1_06_PIN PA6
#define EXP1_07_PIN -1
#define EXP1_08_PIN PB10
#define EXP1_09_PIN PC5
#define EXP1_10_PIN -1
#else
#error "Define RET6_12864_LCD or VET6_12864_LCD to select pins for CR10_STOCKDISPLAY with the Creality V4 controller."
#endif
#elif HAS_DWIN_E3V2 || IS_DWIN_MARLINUI
#define LCD_PINS_RS EXP1_04_PIN
#define LCD_PINS_ENABLE EXP1_03_PIN
#define LCD_PINS_D4 EXP1_05_PIN
// RET6 DWIN ENCODER LCD
#define BTN_ENC PB14
#define BTN_EN1 PB15
#define BTN_EN2 PB12
#define BTN_ENC EXP1_09_PIN
#define BTN_EN1 EXP1_08_PIN
#define BTN_EN2 EXP1_06_PIN
//#define LCD_LED_PIN PB2
#ifndef BEEPER_PIN
#define BEEPER_PIN PB13
#elif ANY(HAS_DWIN_E3V2, IS_DWIN_MARLINUI, DWIN_VET6_CREALITY_LCD)
#if HAS_DWIN_E3V2 || IS_DWIN_MARLINUI
// RET6 DWIN ENCODER LCD
#define EXP1_03_PIN PB15
#define EXP1_04_PIN PB12
#define EXP1_05_PIN PB13
#define EXP1_06_PIN PB14
//#define LCD_LED_PIN PB2
#else
// VET6 DWIN ENCODER LCD
#define EXP1_03_PIN PA7
#define EXP1_04_PIN PA4
#define EXP1_05_PIN PA5
#define EXP1_06_PIN PA6
#endif
#elif ENABLED(DWIN_VET6_CREALITY_LCD)
#define BTN_ENC EXP1_06_PIN
#define BTN_EN1 EXP1_03_PIN
#define BTN_EN2 EXP1_04_PIN
// VET6 DWIN ENCODER LCD
#define BTN_ENC PA6
#define BTN_EN1 PA7
#define BTN_EN2 PA4
#define BEEPER_PIN PA5
#ifndef BEEPER_PIN
#define BEEPER_PIN EXP1_05_PIN
#endif
#endif

77
Marlin/src/pins/stm32f1/pins_CREALITY_V425.h Normal file
View File

@ -0,0 +1,77 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* CREALITY 4.2.5 (STM32F103RE / STM32F103RC) board pin assignments
*/
#include "env_validate.h"
#if HAS_MULTI_HOTEND || E_STEPPERS > 1
#error "Creality v4.2.5 only supports 1 hotend / E stepper."
#endif
#define BOARD_INFO_NAME "Creality V4.2.5"
#define DEFAULT_MACHINE_NAME "CR200B"
//
// EEPROM
//
#if NO_EEPROM_SELECTED
#define IIC_BL24CXX_EEPROM // EEPROM on I2C-0
#undef NO_EEPROM_SELECTED
#elif DISABLED(IIC_BL24CXX_EEPROM)
#define SDCARD_EEPROM_EMULATION // SD EEPROM until all EEPROM is BL24CXX
#endif
//
// Servos
//
#define SERVO0_PIN PB1 // BLTouch OUT
//
// Limit Switches
//
#define X_STOP_PIN PA3
#define Y_STOP_PIN PA4
#define Z_STOP_PIN PA5
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN PB0 // BLTouch IN
#endif
//
// Filament Runout Sensor
//
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN PA6 // "Pulled-high"
#endif
//
// Heaters / Fans
//
#define HEATER_0_PIN PA0 // HEATER1
#define HEATER_BED_PIN PA1 // HOT BED
#define FAN_PIN PA2 // FAN
#include "pins_CREALITY_V4.h"