Add JGAurora A5S and A1 (STM32F103ZET6) (#14291)

- Now compiles and works correctly with changes to HAL timers and watchdog. - Does NOT include awesome work on touch screen function. - Does have working LCD and SD-based EEPROM.
2019-06-16 05:28:22 +10:00
parent 6fb3db1633
commit 3021097888
11 changed files with 9529 additions and 0 deletions
--- a/Marlin/src/core/boards.h
+++ b/Marlin/src/core/boards.h
@ -247,6 +247,7 @@
 #define BOARD_MORPHEUS         1806   // STM32F103C8/STM32F103CB Libmaple based stm32f1 controller
 #define BOARD_MKS_ROBIN        1808   // MKS Robin / STM32F103ZET6
 #define BOARD_BIGTREE_SKR_MINI_V1_1 1814 // STM32F103RC
+#define BOARD_JGAURORA_A5S_A1  1810   // JGAurora A5S A1 / STM32F103ZET6

 //
 // STM32 ARM Cortex-M4F
--- a/Marlin/src/pins/pins.h
+++ b/Marlin/src/pins/pins.h
@ -428,6 +428,8 @@
  #include "pins_MORPHEUS.h"          // STM32F1                                    env:STM32F1
 #elif MB(MKS_ROBIN)
  #include "pins_MKS_ROBIN.h"         // STM32F1                                    env:mks_robin
+#elif MB(JGAURORA_A5S_A1)
+  #include "pins_JGAURORA_A5S_A1.h"   // STM32F1                                    env:JGAURORA_A5S_A1

 //
 // STM32 ARM Cortex-M4F
--- a/Marlin/src/pins/pins_JGAURORA_A5S_A1.h
+++ b/Marlin/src/pins/pins_JGAURORA_A5S_A1.h
@ -0,0 +1,125 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+ /**
+  * 2017 Victor Perez Marlin for stm32f1 test
+  * 2018 Modified by Pablo Crespo for Morpheus Board (https://github.com/pscrespo/Morpheus-STM32)
+  * 2019 Modified by Roberto Mariani & Samuel Pinches for JGAurora A5S & A1 Board.
+  */
+
+/**
+ * JGAurora A5S A1 Board pin assignments
+ */
+
+#ifndef __STM32F1__
+  #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
+#endif
+
+#define BOARD_NAME "JGAurora A5S A1 board"
+
+// #define STM32_XL_DENSITY // required, but should be set by platformio flags, not here! (why? not sure.)
+
+//#define MCU_STM32F103ZE // not yet required
+
+// // I2C EEPROM with 64K of space - AT24C64
+// #define I2C_EEPROM
+// #define E2END 0x7FFF
+
+// Enable EEPROM Emulation for this board
+
+//#define FLASH_EEPROM_EMULATION 1
+//#define E2END  0xFFF //((uint32)(EEPROM_START_ADDRESS + EEPROM_PAGE_SIZE + EEPROM_PAGE_SIZE)) // 	 not 0xFFF
+//#define EEPROM_CHITCHAT
+//#define DEBUG_EEPROM_READWRITE
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN         PC6
+#define Y_STOP_PIN         PG8
+#define Z_STOP_PIN         PG7
+
+//
+// Steppers
+//
+#define X_STEP_PIN         PD6
+#define X_DIR_PIN          PD3
+#define X_ENABLE_PIN       PG9
+
+#define Y_STEP_PIN         PG12
+#define Y_DIR_PIN          PG11
+#define Y_ENABLE_PIN       PG13
+
+#define Z_STEP_PIN         PG15
+#define Z_DIR_PIN          PG14
+#define Z_ENABLE_PIN       PB8
+
+#define E0_STEP_PIN        PE2
+#define E0_DIR_PIN         PB9
+#define E0_ENABLE_PIN      PE3
+
+#define E1_STEP_PIN        PE5
+#define E1_DIR_PIN         PE4
+#define E1_ENABLE_PIN      PE6
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN         PC2
+#define TEMP_BED_PIN       PC1
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN       PA2
+#define HEATER_BED_PIN     PA3
+
+#define FAN_PIN            PA1
+
+#define PS_ON_PIN          PA0
+#define FIL_RUNOUT_PIN     PC7
+
+//
+// LCD
+//
+#define LCD_BACKLIGHT_PIN  PF11
+#define FSMC_CS_PIN        PD7
+#define FSMC_RS_PIN        PG0
+
+//
+// SD Card
+//
+#define SD_DETECT_PIN      PF10
+
+//
+// Misc.
+//
+#define BEEPER_PIN         PC3    // use PB7 to shut up if desired
+#define LED_PIN            PC13
+
+// Touch support
+#define BTN_ENC            PA11   // Real pin is needed to enable encoder's push button functionality used by touch screen. PA11 gives stable value.
+
+#define TOUCH_CS           PA4
+//#define TOUCH_INTERRUPT    PC4    // Not yet implemented
+
+#define NO_PAUSE_AFTER_PRINT