bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

MMU2 Extruder Sensor support (#17886)

Browse Source
This commit is contained in:
Bastien R 2020-05-17 21:52:45 +02:00 committed by GitHub
parent df04a427f3
commit 2ec482a102
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
5 changed files with 289 additions and 74 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
Marlin/Configuration_adv.h
View File

@ -3279,7 +3279,7 @@
// This is for Prusa MK3-style extruders. Customize for your hardware. // This is for Prusa MK3-style extruders. Customize for your hardware.
#define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0
#define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \
{ 7.2, 562 }, \ { 7.2, 1145 }, \
{ 14.4, 871 }, \ { 14.4, 871 }, \
{ 36.0, 1393 }, \ { 36.0, 1393 }, \
{ 14.4, 871 }, \ { 14.4, 871 }, \
@ -3299,7 +3299,25 @@
{ -50.0, 2000 } { -50.0, 2000 }
#endif #endif
// Using a sensor like the MMU2S /**
* MMU Extruder Sensor
* Add support for Prusa IR Sensor (or other) to detect that filament reach the extruder to make loading filament more reliable
* If your extruder is equipped with a filament sensor located less than 38mm from the gears you can use this feature
* During loading to the extruder, the sensor will stop the loading command when he's triggered and make a last move to load filament to the gears
* If no filament is detected, MMU2 will make more loading attemps, if finally no filament is detected, the printer will enter in runout state
*/
//#define MMU_EXTRUDER_SENSOR
#if ENABLED(MMU_EXTRUDER_SENSOR)
#define MMU_LOADING_ATTEMPTS_NR 5 //max. number of attempts to load filament if first load fail
#endif
/**
* Using a sensor like the MMU2S
* This mode only work if you have a MK3S extruder with sensor sensing the extruder idler mmu2s
* See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11
*/
//#define PRUSA_MMU2_S_MODE //#define PRUSA_MMU2_S_MODE
#if ENABLED(PRUSA_MMU2_S_MODE) #if ENABLED(PRUSA_MMU2_S_MODE)
#define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries)

268
Marlin/src/feature/mmu2/mmu2.cpp
View File

@ -51,8 +51,13 @@ MMU2 mmu2;
#define MMU_TODELAY 100 #define MMU_TODELAY 100
#define MMU_TIMEOUT 10 #define MMU_TIMEOUT 10
#define MMU_CMD_TIMEOUT 60000ul // 5min timeout for mmu commands (except P0) #define MMU_CMD_TIMEOUT 45000UL // 45s timeout for mmu commands (except P0)
#define MMU_P0_TIMEOUT 3000ul // Timeout for P0 command: 3seconds #define MMU_P0_TIMEOUT 3000UL // Timeout for P0 command: 3seconds
#if ENABLED(MMU_EXTRUDER_SENSOR)
uint8_t mmu_idl_sens = 0;
static bool mmu_loading_flag = false;
#endif
#define MMU_CMD_NONE 0 #define MMU_CMD_NONE 0
#define MMU_CMD_T0 0x10 #define MMU_CMD_T0 0x10
@ -79,11 +84,7 @@ MMU2 mmu2;
#define MMU_CMD_F3 0x73 #define MMU_CMD_F3 0x73
#define MMU_CMD_F4 0x74 #define MMU_CMD_F4 0x74
#if ENABLED(MMU2_MODE_12V) #define MMU_REQUIRED_FW_BUILDNR TERN(MMU2_MODE_12V, 132, 126)
#define MMU_REQUIRED_FW_BUILDNR 132
#else
#define MMU_REQUIRED_FW_BUILDNR 126
#endif
#define MMU2_NO_TOOL 99 #define MMU2_NO_TOOL 99
#define MMU_BAUD 115200 #define MMU_BAUD 115200
@ -99,7 +100,7 @@ int8_t MMU2::state = 0;
volatile int8_t MMU2::finda = 1; volatile int8_t MMU2::finda = 1;
volatile bool MMU2::finda_runout_valid; volatile bool MMU2::finda_runout_valid;
int16_t MMU2::version = -1, MMU2::buildnr = -1; int16_t MMU2::version = -1, MMU2::buildnr = -1;
millis_t MMU2::last_request, MMU2::next_P0_request; millis_t MMU2::prev_request, MMU2::prev_P0_request;
char MMU2::rx_buffer[MMU_RX_SIZE], MMU2::tx_buffer[MMU_TX_SIZE]; char MMU2::rx_buffer[MMU_RX_SIZE], MMU2::tx_buffer[MMU_TX_SIZE];
#if BOTH(HAS_LCD_MENU, MMU2_MENUS) #if BOTH(HAS_LCD_MENU, MMU2_MENUS)
@ -159,6 +160,10 @@ uint8_t MMU2::get_current_tool() {
return extruder == MMU2_NO_TOOL ? -1 : extruder; return extruder == MMU2_NO_TOOL ? -1 : extruder;
} }
#if EITHER(PRUSA_MMU2_S_MODE, MMU_EXTRUDER_SENSOR)
#define FILAMENT_PRESENT() (READ(FIL_RUNOUT_PIN) != FIL_RUNOUT_INVERTING)
#endif
void MMU2::mmu_loop() { void MMU2::mmu_loop() {
switch (state) { switch (state) {
@ -248,6 +253,7 @@ void MMU2::mmu_loop() {
int filament = cmd - MMU_CMD_T0; int filament = cmd - MMU_CMD_T0;
DEBUG_ECHOLNPAIR("MMU <= T", filament); DEBUG_ECHOLNPAIR("MMU <= T", filament);
tx_printf_P(PSTR("T%d\n"), filament); tx_printf_P(PSTR("T%d\n"), filament);
TERN_(MMU_EXTRUDER_SENSOR, mmu_idl_sens = 1); // enable idler sensor, if any
state = 3; // wait for response state = 3; // wait for response
} }
else if (WITHIN(cmd, MMU_CMD_L0, MMU_CMD_L4)) { else if (WITHIN(cmd, MMU_CMD_L0, MMU_CMD_L4)) {
@ -296,7 +302,7 @@ void MMU2::mmu_loop() {
last_cmd = cmd; last_cmd = cmd;
cmd = MMU_CMD_NONE; cmd = MMU_CMD_NONE;
} }
else if (ELAPSED(millis(), next_P0_request)) { else if (ELAPSED(millis(), prev_P0_request + 300)) {
// read FINDA // read FINDA
tx_str_P(PSTR("P0\n")); tx_str_P(PSTR("P0\n"));
state = 2; // wait for response state = 2; // wait for response
@ -312,26 +318,35 @@ void MMU2::mmu_loop() {
// This is super annoying. Only activate if necessary // This is super annoying. Only activate if necessary
// if (finda_runout_valid) DEBUG_ECHOLNPAIR_F("MMU <= 'P0'\nMMU => ", finda, 6); // if (finda_runout_valid) DEBUG_ECHOLNPAIR_F("MMU <= 'P0'\nMMU => ", finda, 6);
state = 1;
if (cmd == 0) ready = true;
if (!finda && finda_runout_valid) filament_runout(); if (!finda && finda_runout_valid) filament_runout();
if (cmd == 0) ready = true;
state = 1;
} }
else if (ELAPSED(millis(), last_request + MMU_P0_TIMEOUT)) // Resend request after timeout (3s) else if (ELAPSED(millis(), prev_request + MMU_P0_TIMEOUT)) // Resend request after timeout (3s)
state = 1; state = 1;
TERN_(PRUSA_MMU2_S_MODE, check_filament()); TERN_(PRUSA_MMU2_S_MODE, check_filament());
break; break;
case 3: // response to mmu commands case 3: // response to mmu commands
#if ENABLED(MMU_EXTRUDER_SENSOR)
if (mmu_idl_sens) {
if (FILAMENT_PRESENT() && mmu_loading_flag) {
DEBUG_ECHOLNPGM("MMU <= 'A'\n");
tx_str_P(PSTR("A\n")); // send 'abort' request
mmu_idl_sens = 0;
DEBUG_ECHOLNPGM("MMU IDLER_SENSOR = 0 - ABORT\n");
}
}
#endif
if (rx_ok()) { if (rx_ok()) {
DEBUG_ECHOLNPGM("MMU => 'ok'"); DEBUG_ECHOLNPGM("MMU => 'ok'");
ready = true; ready = true;
state = 1; state = 1;
last_cmd = MMU_CMD_NONE; last_cmd = MMU_CMD_NONE;
} }
else if (ELAPSED(millis(), last_request + MMU_CMD_TIMEOUT)) { else if (ELAPSED(millis(), prev_request + MMU_CMD_TIMEOUT)) {
// resend request after timeout // resend request after timeout
if (last_cmd) { if (last_cmd) {
DEBUG_ECHOLNPGM("MMU retry"); DEBUG_ECHOLNPGM("MMU retry");
@ -351,7 +366,7 @@ void MMU2::mmu_loop() {
bool MMU2::rx_start() { bool MMU2::rx_start() {
// check for start message // check for start message
if (rx_str_P(PSTR("start\n"))) { if (rx_str_P(PSTR("start\n"))) {
next_P0_request = millis() + 300; prev_P0_request = millis();
return true; return true;
} }
return false; return false;
@ -397,7 +412,7 @@ void MMU2::tx_str_P(const char* str) {
uint8_t len = strlen_P(str); uint8_t len = strlen_P(str);
LOOP_L_N(i, len) mmuSerial.write(pgm_read_byte(str++)); LOOP_L_N(i, len) mmuSerial.write(pgm_read_byte(str++));
rx_buffer[0] = '\0'; rx_buffer[0] = '\0';
last_request = millis(); prev_request = millis();
} }
/** /**
@ -408,7 +423,7 @@ void MMU2::tx_printf_P(const char* format, int argument = -1) {
uint8_t len = sprintf_P(tx_buffer, format, argument); uint8_t len = sprintf_P(tx_buffer, format, argument);
LOOP_L_N(i, len) mmuSerial.write(tx_buffer[i]); LOOP_L_N(i, len) mmuSerial.write(tx_buffer[i]);
rx_buffer[0] = '\0'; rx_buffer[0] = '\0';
last_request = millis(); prev_request = millis();
} }
/** /**
@ -419,7 +434,7 @@ void MMU2::tx_printf_P(const char* format, int argument1, int argument2) {
uint8_t len = sprintf_P(tx_buffer, format, argument1, argument2); uint8_t len = sprintf_P(tx_buffer, format, argument1, argument2);
LOOP_L_N(i, len) mmuSerial.write(tx_buffer[i]); LOOP_L_N(i, len) mmuSerial.write(tx_buffer[i]);
rx_buffer[0] = '\0'; rx_buffer[0] = '\0';
last_request = millis(); prev_request = millis();
} }
/** /**
@ -435,7 +450,7 @@ void MMU2::clear_rx_buffer() {
*/ */
bool MMU2::rx_ok() { bool MMU2::rx_ok() {
if (rx_str_P(PSTR("ok\n"))) { if (rx_str_P(PSTR("ok\n"))) {
next_P0_request = millis() + 300; prev_P0_request = millis();
return true; return true;
} }
return false; return false;
@ -476,12 +491,10 @@ static bool mmu2_not_responding() {
return success; return success;
} }
#endif
/** /**
* Handle tool change * Handle tool change
*/ */
void MMU2::tool_change(uint8_t index) { void MMU2::tool_change(const uint8_t index) {
if (!enabled) return; if (!enabled) return;
@ -509,13 +522,11 @@ void MMU2::tool_change(uint8_t index) {
} }
/** /**
*
* Handle special T?/Tx/Tc commands * Handle special T?/Tx/Tc commands
* *
* T? Gcode to extrude shouldn't have to follow, load to extruder wheels is done automatically * T? Gcode to extrude shouldn't have to follow, load to extruder wheels is done automatically
* Tx Same as T?, except nozzle doesn't have to be preheated. Tc must be placed after extruder nozzle is preheated to finish filament load. * Tx Same as T?, except nozzle doesn't have to be preheated. Tc must be placed after extruder nozzle is preheated to finish filament load.
* Tc Load to nozzle after filament was prepared by Tx and extruder nozzle is already heated. * Tc Load to nozzle after filament was prepared by Tx and extruder nozzle is already heated.
*
*/ */
void MMU2::tool_change(const char* special) { void MMU2::tool_change(const char* special) {
@ -555,9 +566,190 @@ void MMU2::tool_change(const char* special) {
set_runout_valid(true); set_runout_valid(true);
#endif // MMU2_MENUS
}
#elif ENABLED(MMU_EXTRUDER_SENSOR)
/**
* Handle tool change
*/
void MMU2::tool_change(const uint8_t index) {
if (!enabled) return;
set_runout_valid(false);
if (index != extruder) {
DISABLE_AXIS_E0();
if (FILAMENT_PRESENT()) {
DEBUG_ECHOLNPGM("Unloading\n");
mmu_loading_flag = false;
command(MMU_CMD_U0);
manage_response(true, true);
}
ui.status_printf_P(0, GET_TEXT(MSG_MMU2_LOADING_FILAMENT), int(index + 1));
mmu_loading_flag = true;
command(MMU_CMD_T0 + index);
manage_response(true, true);
mmu_continue_loading();
command(MMU_CMD_C0);
extruder = index;
active_extruder = 0;
ENABLE_AXIS_E0();
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR(STR_ACTIVE_EXTRUDER, int(extruder));
ui.reset_status();
}
set_runout_valid(true);
}
/**
* Handle special T?/Tx/Tc commands
*
* T? Gcode to extrude shouldn't have to follow, load to extruder wheels is done automatically
* Tx Same as T?, except nozzle doesn't have to be preheated. Tc must be placed after extruder nozzle is preheated to finish filament load.
* Tc Load to nozzle after filament was prepared by Tx and extruder nozzle is already heated.
*/
void MMU2::tool_change(const char* special) {
if (!enabled) return;
#if ENABLED(MMU2_MENUS)
set_runout_valid(false);
switch (*special) {
case '?': {
DEBUG_ECHOLNPGM("case ?\n");
uint8_t index = mmu2_choose_filament();
while (!thermalManager.wait_for_hotend(active_extruder, false)) safe_delay(100);
load_filament_to_nozzle(index);
} break;
case 'x': {
DEBUG_ECHOLNPGM("case x\n");
planner.synchronize();
uint8_t index = mmu2_choose_filament();
DISABLE_AXIS_E0();
command(MMU_CMD_T0 + index);
manage_response(true, true);
mmu_continue_loading();
command(MMU_CMD_C0);
mmu_loop();
ENABLE_AXIS_E0();
extruder = index;
active_extruder = 0;
} break;
case 'c': {
DEBUG_ECHOLNPGM("case c\n");
while (!thermalManager.wait_for_hotend(active_extruder, false)) safe_delay(100);
execute_extruder_sequence((const E_Step *)load_to_nozzle_sequence, COUNT(load_to_nozzle_sequence));
} break;
}
set_runout_valid(true);
#endif // MMU2_MENUS
}
void MMU2::mmu_continue_loading() {
for (uint8_t i = 0; i < MMU_LOADING_ATTEMPTS_NR; i++) {
DEBUG_ECHOLNPAIR("Additional load attempt #", i);
if (FILAMENT_PRESENT()) break;
command(MMU_CMD_C0);
manage_response(true, true);
}
if (!FILAMENT_PRESENT()) {
DEBUG_ECHOLNPGM("Filament never reached sensor, runout");
filament_runout();
}
mmu_idl_sens = 0;
}
#elif DISABLED(MMU_EXTRUDER_SENSOR) && DISABLED(PRUSA_MMU2_S_MODE)
/**
* Handle tool change
*/
void MMU2::tool_change(const uint8_t index) {
if (!enabled) return;
set_runout_valid(false);
if (index != extruder) {
DISABLE_AXIS_E0();
ui.status_printf_P(0, GET_TEXT(MSG_MMU2_LOADING_FILAMENT), int(index + 1));
command(MMU_CMD_T0 + index);
manage_response(true, true);
command(MMU_CMD_C0);
extruder = index; //filament change is finished
active_extruder = 0;
ENABLE_AXIS_E0();
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR(STR_ACTIVE_EXTRUDER, int(extruder));
ui.reset_status();
}
set_runout_valid(true);
}
/**
*
* Handle special T?/Tx/Tc commands
*
* T? Gcode to extrude shouldn't have to follow, load to extruder wheels is done automatically
* Tx Same as T?, except nozzle doesn't have to be preheated. Tc must be placed after extruder nozzle is preheated to finish filament load.
* Tc Load to nozzle after filament was prepared by Tx and extruder nozzle is already heated.
*
*/
void MMU2::tool_change(const char* special) {
if (!enabled) return;
#if ENABLED(MMU2_MENUS)
set_runout_valid(false);
switch (*special) {
case '?': {
DEBUG_ECHOLNPGM("case ?\n");
uint8_t index = mmu2_choose_filament();
while (!thermalManager.wait_for_hotend(active_extruder, false)) safe_delay(100);
load_filament_to_nozzle(index);
} break;
case 'x': {
DEBUG_ECHOLNPGM("case x\n");
planner.synchronize();
uint8_t index = mmu2_choose_filament();
DISABLE_AXIS_E0();
command(MMU_CMD_T0 + index);
manage_response(true, true);
command(MMU_CMD_C0);
mmu_loop();
ENABLE_AXIS_E0();
extruder = index;
active_extruder = 0;
} break;
case 'c': {
DEBUG_ECHOLNPGM("case c\n");
while (!thermalManager.wait_for_hotend(active_extruder, false)) safe_delay(100);
execute_extruder_sequence((const E_Step *)load_to_nozzle_sequence, COUNT(load_to_nozzle_sequence));
} break;
}
set_runout_valid(true);
#endif #endif
} }
#endif // MMU_EXTRUDER_SENSOR
/** /**
* Set next command * Set next command
*/ */
@ -593,7 +785,7 @@ void MMU2::manage_response(const bool move_axes, const bool turn_off_nozzle) {
bool response = false; bool response = false;
mmu_print_saved = false; mmu_print_saved = false;
xyz_pos_t resume_position; xyz_pos_t resume_position;
int16_t resume_hotend_temp; int16_t resume_hotend_temp = thermalManager.degTargetHotend(active_extruder);
KEEPALIVE_STATE(PAUSED_FOR_USER); KEEPALIVE_STATE(PAUSED_FOR_USER);
@ -652,7 +844,7 @@ void MMU2::manage_response(const bool move_axes, const bool turn_off_nozzle) {
} }
} }
void MMU2::set_filament_type(uint8_t index, uint8_t filamentType) { void MMU2::set_filament_type(const uint8_t index, const uint8_t filamentType) {
if (!enabled) return; if (!enabled) return;
cmd_arg = filamentType; cmd_arg = filamentType;
@ -667,20 +859,21 @@ void MMU2::filament_runout() {
} }
#if ENABLED(PRUSA_MMU2_S_MODE) #if ENABLED(PRUSA_MMU2_S_MODE)
void MMU2::check_filament() { void MMU2::check_filament() {
const bool runout = READ(FIL_RUNOUT_PIN) ^ (FIL_RUNOUT_INVERTING); const bool present = FILAMENT_PRESENT();
if (runout && !mmu2s_triggered) { if (present && !mmu2s_triggered) {
DEBUG_ECHOLNPGM("MMU <= 'A'"); DEBUG_ECHOLNPGM("MMU <= 'A'");
tx_str_P(PSTR("A\n")); tx_str_P(PSTR("A\n"));
} }
mmu2s_triggered = runout; mmu2s_triggered = present;
} }
bool MMU2::can_load() { bool MMU2::can_load() {
execute_extruder_sequence((const E_Step *)can_load_sequence, COUNT(can_load_sequence)); execute_extruder_sequence((const E_Step *)can_load_sequence, COUNT(can_load_sequence));
int filament_detected_count = 0; int filament_detected_count = 0;
const int steps = MMU2_CAN_LOAD_RETRACT / MMU2_CAN_LOAD_INCREMENT; const int steps = (MMU2_CAN_LOAD_RETRACT) / (MMU2_CAN_LOAD_INCREMENT);
DEBUG_ECHOLNPGM("MMU can_load:"); DEBUG_ECHOLNPGM("MMU can_load:");
LOOP_L_N(i, steps) { LOOP_L_N(i, steps) {
execute_extruder_sequence((const E_Step *)can_load_increment_sequence, COUNT(can_load_increment_sequence)); execute_extruder_sequence((const E_Step *)can_load_increment_sequence, COUNT(can_load_increment_sequence));
@ -689,7 +882,7 @@ void MMU2::filament_runout() {
if (mmu2s_triggered) ++filament_detected_count; if (mmu2s_triggered) ++filament_detected_count;
} }
if (filament_detected_count <= steps - (MMU2_CAN_LOAD_DEVIATION / MMU2_CAN_LOAD_INCREMENT)) { if (filament_detected_count <= steps - (MMU2_CAN_LOAD_DEVIATION) / (MMU2_CAN_LOAD_INCREMENT)) {
DEBUG_ECHOLNPGM(" failed."); DEBUG_ECHOLNPGM(" failed.");
return false; return false;
} }
@ -702,7 +895,7 @@ void MMU2::filament_runout() {
#if BOTH(HAS_LCD_MENU, MMU2_MENUS) #if BOTH(HAS_LCD_MENU, MMU2_MENUS)
// Load filament into MMU2 // Load filament into MMU2
void MMU2::load_filament(uint8_t index) { void MMU2::load_filament(const uint8_t index) {
if (!enabled) return; if (!enabled) return;
command(MMU_CMD_L0 + index); command(MMU_CMD_L0 + index);
manage_response(false, false); manage_response(false, false);
@ -714,7 +907,7 @@ void MMU2::filament_runout() {
* Switch material and load to nozzle * Switch material and load to nozzle
* *
*/ */
bool MMU2::load_filament_to_nozzle(uint8_t index) { bool MMU2::load_filament_to_nozzle(const uint8_t index) {
if (!enabled) return false; if (!enabled) return false;
@ -739,7 +932,6 @@ void MMU2::filament_runout() {
} }
/** /**
*
* Load filament to nozzle of multimaterial printer * Load filament to nozzle of multimaterial printer
* *
* This function is used only only after T? (user select filament) and M600 (change filament). * This function is used only only after T? (user select filament) and M600 (change filament).
@ -751,7 +943,7 @@ void MMU2::filament_runout() {
execute_extruder_sequence((const E_Step *)load_to_nozzle_sequence, COUNT(load_to_nozzle_sequence)); execute_extruder_sequence((const E_Step *)load_to_nozzle_sequence, COUNT(load_to_nozzle_sequence));
} }
bool MMU2::eject_filament(uint8_t index, bool recover) { bool MMU2::eject_filament(const uint8_t index, const bool recover) {
if (!enabled) return false; if (!enabled) return false;
@ -798,9 +990,7 @@ void MMU2::filament_runout() {
} }
/** /**
* * Unload from hotend and retract to MMU
* unload from hotend and retract to MMU
*
*/ */
bool MMU2::unload() { bool MMU2::unload() {

18
Marlin/src/feature/mmu2/mmu2.h
View File

@ -44,24 +44,24 @@ public:
static void init(); static void init();
static void reset(); static void reset();
static void mmu_loop(); static void mmu_loop();
static void tool_change(uint8_t index); static void tool_change(const uint8_t index);
static void tool_change(const char* special); static void tool_change(const char* special);
static uint8_t get_current_tool(); static uint8_t get_current_tool();
static void set_filament_type(uint8_t index, uint8_t type); static void set_filament_type(const uint8_t index, const uint8_t type);
#if BOTH(HAS_LCD_MENU, MMU2_MENUS) #if BOTH(HAS_LCD_MENU, MMU2_MENUS)
static bool unload(); static bool unload();
static void load_filament(uint8_t); static void load_filament(uint8_t);
static void load_all(); static void load_all();
static bool load_filament_to_nozzle(uint8_t index); static bool load_filament_to_nozzle(const uint8_t index);
static bool eject_filament(uint8_t index, bool recover); static bool eject_filament(const uint8_t index, const bool recover);
#endif #endif
private: private:
static bool rx_str_P(const char* str); static bool rx_str_P(const char* str);
static void tx_str_P(const char* str); static void tx_str_P(const char* str);
static void tx_printf_P(const char* format, int argument); static void tx_printf_P(const char* format, const int argument);
static void tx_printf_P(const char* format, int argument1, int argument2); static void tx_printf_P(const char* format, const int argument1, const int argument2);
static void clear_rx_buffer(); static void clear_rx_buffer();
static bool rx_ok(); static bool rx_ok();
@ -89,6 +89,10 @@ private:
FORCE_INLINE static bool load_to_gears() { return true; } FORCE_INLINE static bool load_to_gears() { return true; }
#endif #endif
#if ENABLED(MMU_EXTRUDER_SENSOR)
static void mmu_continue_loading();
#endif
static bool enabled, ready, mmu_print_saved; static bool enabled, ready, mmu_print_saved;
static uint8_t cmd, cmd_arg, last_cmd, extruder; static uint8_t cmd, cmd_arg, last_cmd, extruder;
@ -96,7 +100,7 @@ private:
static volatile int8_t finda; static volatile int8_t finda;
static volatile bool finda_runout_valid; static volatile bool finda_runout_valid;
static int16_t version, buildnr; static int16_t version, buildnr;
static millis_t last_request, next_P0_request; static millis_t prev_request, prev_P0_request;
static char rx_buffer[MMU_RX_SIZE], tx_buffer[MMU_TX_SIZE]; static char rx_buffer[MMU_RX_SIZE], tx_buffer[MMU_TX_SIZE];
static inline void set_runout_valid(const bool valid) { static inline void set_runout_valid(const bool valid) {

12
Marlin/src/inc/SanityCheck.h
View File

@ -2742,12 +2742,14 @@ static_assert( _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
* Prusa MMU2 requirements * Prusa MMU2 requirements
*/ */
#if ENABLED(PRUSA_MMU2) #if ENABLED(PRUSA_MMU2)
#if DISABLED(NOZZLE_PARK_FEATURE) #if EXTRUDERS != 5
#error "PRUSA_MMU2 requires NOZZLE_PARK_FEATURE."
#elif EXTRUDERS != 5
#error "PRUSA_MMU2 requires EXTRUDERS = 5." #error "PRUSA_MMU2 requires EXTRUDERS = 5."
#elif ENABLED(PRUSA_MMU2_S_MODE) && DISABLED(FILAMENT_RUNOUT_SENSOR) #elif DISABLED(NOZZLE_PARK_FEATURE)
#error "PRUSA_MMU2_S_MODE requires FILAMENT_RUNOUT_SENSOR. Enable it to continue." #error "PRUSA_MMU2 requires NOZZLE_PARK_FEATURE. Enable it to continue."
#elif EITHER(PRUSA_MMU2_S_MODE, MMU_EXTRUDER_SENSOR) && DISABLED(FILAMENT_RUNOUT_SENSOR)
#error "PRUSA_MMU2_S_MODE or MMU_EXTRUDER_SENSOR requires FILAMENT_RUNOUT_SENSOR. Enable it to continue."
#elif BOTH(PRUSA_MMU2_S_MODE, MMU_EXTRUDER_SENSOR)
#error "Enable only one of PRUSA_MMU2_S_MODE or MMU_EXTRUDER_SENSOR."
#elif DISABLED(ADVANCED_PAUSE_FEATURE) #elif DISABLED(ADVANCED_PAUSE_FEATURE)
static_assert(nullptr == strstr(MMU2_FILAMENT_RUNOUT_SCRIPT, "M600"), "ADVANCED_PAUSE_FEATURE is required to use M600 with PRUSA_MMU2."); static_assert(nullptr == strstr(MMU2_FILAMENT_RUNOUT_SCRIPT, "M600"), "ADVANCED_PAUSE_FEATURE is required to use M600 with PRUSA_MMU2.");
#endif #endif

11
Marlin/src/lcd/language/language_fr.h
View File

@ -476,15 +476,16 @@ namespace Language_fr {
PROGMEM Language_Str MSG_LCD_PROBING_FAILED = _UxGT("Echec sonde"); PROGMEM Language_Str MSG_LCD_PROBING_FAILED = _UxGT("Echec sonde");
PROGMEM Language_Str MSG_M600_TOO_COLD = _UxGT("M600: Trop froid"); PROGMEM Language_Str MSG_M600_TOO_COLD = _UxGT("M600: Trop froid");
PROGMEM Language_Str MSG_KILL_MMU2_FIRMWARE = _UxGT("MAJ firmware MMU!!");
PROGMEM Language_Str MSG_MMU2_CHOOSE_FILAMENT_HEADER = _UxGT("CHOISIR FILAMENT"); PROGMEM Language_Str MSG_MMU2_CHOOSE_FILAMENT_HEADER = _UxGT("CHOISIR FILAMENT");
PROGMEM Language_Str MSG_MMU2_MENU = _UxGT("MMU"); PROGMEM Language_Str MSG_MMU2_MENU = _UxGT("MMU");
PROGMEM Language_Str MSG_MMU2_NOT_RESPONDING = _UxGT("MMU ne répond plus"); PROGMEM Language_Str MSG_MMU2_NOT_RESPONDING = _UxGT("MMU ne répond plus");
PROGMEM Language_Str MSG_MMU2_RESUME = _UxGT("Continuer impr."); PROGMEM Language_Str MSG_MMU2_RESUME = _UxGT("Continuer Imp. MMU");
PROGMEM Language_Str MSG_MMU2_RESUMING = _UxGT("Reprise..."); PROGMEM Language_Str MSG_MMU2_RESUMING = _UxGT("Reprise MMU...");
PROGMEM Language_Str MSG_MMU2_LOAD_FILAMENT = _UxGT("Charger filament"); PROGMEM Language_Str MSG_MMU2_LOAD_FILAMENT = _UxGT("Charge dans MMU");
PROGMEM Language_Str MSG_MMU2_LOAD_ALL = _UxGT("Charger tous"); PROGMEM Language_Str MSG_MMU2_LOAD_ALL = _UxGT("Charger tous dans MMU");
PROGMEM Language_Str MSG_MMU2_LOAD_TO_NOZZLE = _UxGT("Charger dans buse"); PROGMEM Language_Str MSG_MMU2_LOAD_TO_NOZZLE = _UxGT("Charger dans buse");
PROGMEM Language_Str MSG_MMU2_EJECT_FILAMENT = _UxGT("Ejecter filament"); PROGMEM Language_Str MSG_MMU2_EJECT_FILAMENT = _UxGT("Ejecter fil. du MMU");
PROGMEM Language_Str MSG_MMU2_EJECT_FILAMENT_N = _UxGT("Ejecter fil. ~"); PROGMEM Language_Str MSG_MMU2_EJECT_FILAMENT_N = _UxGT("Ejecter fil. ~");
PROGMEM Language_Str MSG_MMU2_UNLOAD_FILAMENT = _UxGT("Retrait filament"); PROGMEM Language_Str MSG_MMU2_UNLOAD_FILAMENT = _UxGT("Retrait filament");
PROGMEM Language_Str MSG_MMU2_LOADING_FILAMENT = _UxGT("Chargem. fil. %i..."); PROGMEM Language_Str MSG_MMU2_LOADING_FILAMENT = _UxGT("Chargem. fil. %i...");