From 2e172f38bd318c296468cc8a7645dced9368e87e Mon Sep 17 00:00:00 2001
From: chrono <chrono@open-resource.org>
Date: Sun, 1 Mar 2015 09:16:55 +0000
Subject: [PATCH] Added support for Felix 2.0/3.0 printers

---
 Marlin/boards.h      |   2 +
 Marlin/pins.h        |   3 ++
 Marlin/pins_FELIX2.h | 112 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 117 insertions(+)
 create mode 100644 Marlin/pins_FELIX2.h

diff --git a/Marlin/boards.h b/Marlin/boards.h
index 2f1107b45b..8039ca116c 100644
--- a/Marlin/boards.h
+++ b/Marlin/boards.h
@@ -52,9 +52,11 @@
 #define BOARD_HEPHESTOS         42   // bq Prusa i3 Hephestos
 #define BOARD_BAM_DICE          401  // 2PrintBeta BAM&DICE with STK drivers
 #define BOARD_BAM_DICE_DUE      402  // 2PrintBeta BAM&DICE Due with STK drivers
+#define BOARD_FELIX2			101  // Felix 2.0+ Electronics
 
 #define BOARD_99                99   // This is in pins.h but...?
 
 #define MB(board) (MOTHERBOARD==BOARD_##board)
 
 #endif //__BOARDS_H
+
diff --git a/Marlin/pins.h b/Marlin/pins.h
index c33fa24e05..decafe6239 100644
--- a/Marlin/pins.h
+++ b/Marlin/pins.h
@@ -114,6 +114,8 @@
   #include "pins_RAMPS_13.h"
 #elif MB(BAM_DICE_DUE)
   #include "pins_BAM_DICE_DUE.h"
+#elif MB(FELIX2)
+  #include "pins_FELIX2.h"
 #elif MB(99)
   #include "pins_99.h"
 #else
@@ -185,3 +187,4 @@
                        }
 
 #endif //__PINS_H
+
diff --git a/Marlin/pins_FELIX2.h b/Marlin/pins_FELIX2.h
new file mode 100644
index 0000000000..6ef3775de5
--- /dev/null
+++ b/Marlin/pins_FELIX2.h
@@ -0,0 +1,112 @@
+/****************************************************************************************
+* FELIXprinters v2.0/3.0 pin assignment
+*
+****************************************************************************************/
+#if MOTHERBOARD == BOARD_FELIX2
+#define KNOWN_BOARD 1
+
+//////////////////FIX THIS//////////////
+#ifndef __AVR_ATmega1280__
+#ifndef __AVR_ATmega2560__
+#error Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
+#endif
+#endif
+
+#define LARGE_FLASH        true
+
+#define X_STEP_PIN         54
+#define X_DIR_PIN          55
+#define X_ENABLE_PIN       38
+#define X_MIN_PIN           3
+#define X_MAX_PIN           -1
+
+#define Y_STEP_PIN         60
+#define Y_DIR_PIN          61
+#define Y_ENABLE_PIN       56
+#define Y_MIN_PIN          14
+#define Y_MAX_PIN          -1
+
+#define Z_STEP_PIN         46
+#define Z_DIR_PIN          48
+#define Z_ENABLE_PIN       62
+#define Z_MIN_PIN          18
+#define Z_MAX_PIN          -1
+
+#define Z2_STEP_PIN        -1
+#define Z2_DIR_PIN         -1
+#define Z2_ENABLE_PIN      -1
+
+#define E0_STEP_PIN        26
+#define E0_DIR_PIN         28
+#define E0_ENABLE_PIN      24
+
+#define E1_STEP_PIN        36
+#define E1_DIR_PIN         34
+#define E1_ENABLE_PIN      30
+
+#define SDPOWER            1
+#define SDSS               53
+#define LED_PIN            13
+
+#define FAN_PIN            9 // (Sprinter config)
+#define PS_ON_PIN          12
+
+#define KILL_PIN           -1
+
+#define HEATER_0_PIN       10   // EXTRUDER 1
+#define HEATER_1_PIN       7    // EXTRUDER 2 (FAN On Sprinter)
+#define HEATER_2_PIN       -1
+#define HEATER_BED_PIN     8    // BED
+
+#define TEMP_0_PIN         13   // ANALOG NUMBERING
+#define TEMP_1_PIN         15   // ANALOG NUMBERING
+#define TEMP_2_PIN         -1   // ANALOG NUMBERING
+
+#define TEMP_BED_PIN       14   // ANALOG NUMBERING
+
+#ifdef ULTRA_LCD
+
+#ifdef NEWPANEL
+//encoder rotation values
+#define encrot0 0
+#define encrot1 2
+#define encrot2 3
+#define encrot3 1
+
+#define BLEN_A 0
+#define BLEN_B 1
+#define BLEN_C 2
+
+#define LCD_PINS_RS 16
+#define LCD_PINS_ENABLE 17
+#define LCD_PINS_D4 23
+#define LCD_PINS_D5 25
+#define LCD_PINS_D6 27
+#define LCD_PINS_D7 29
+
+//arduino pin which triggers an piezzo beeper
+#define BEEPER 33	 // Beeper on AUX-4
+
+//buttons are directly attached using AUX-2
+#define BTN_EN1 37
+#define BTN_EN2 35
+#define BTN_ENC 31  //the click
+
+#define SDCARDDETECT 6  // Ramps does not use this port
+#endif //NEWPANEL
+#endif //ULTRA_LCD
+
+// SPI for Max6675 Thermocouple
+
+#ifndef SDSUPPORT
+// these pins are defined in the SD library if building with SD support
+#define MAX_SCK_PIN          52
+#define MAX_MISO_PIN         50
+#define MAX_MOSI_PIN         51
+#define MAX6675_SS       53
+#else
+#define MAX6675_SS       49
+#endif
+
+#endif//MOTHERBOARD == BOARD_FELIX2
+