tag the utf-8 strings
This commit is contained in:
yhfudev
@ -32,191 +32,191 @@
|
||||
|
||||
#define DISPLAY_CHARSET_ISO10646_1
|
||||
|
||||
#define WELCOME_MSG MACHINE_NAME " gereed."
|
||||
#define MSG_SD_INSERTED "Kaart ingestoken"
|
||||
#define MSG_SD_REMOVED "Kaart verwijderd"
|
||||
#define MSG_LCD_ENDSTOPS "Endstops" // Max length 8 characters
|
||||
#define MSG_MAIN "Hoofdmenu"
|
||||
#define MSG_AUTOSTART "Autostart"
|
||||
#define MSG_DISABLE_STEPPERS "Motoren uit"
|
||||
#define MSG_AUTO_HOME "Auto home"
|
||||
#define MSG_AUTO_HOME_X "Home X"
|
||||
#define MSG_AUTO_HOME_Y "Home Y"
|
||||
#define MSG_AUTO_HOME_Z "Home Z"
|
||||
#define MSG_LEVEL_BED_HOMING "Homing XYZ"
|
||||
#define MSG_LEVEL_BED_WAITING "Klik voor begin"
|
||||
#define MSG_LEVEL_BED_NEXT_POINT "Volgende Plaats"
|
||||
#define MSG_LEVEL_BED_DONE "Bed level kompl."
|
||||
#define MSG_LEVEL_BED_CANCEL "Bed level afbr."
|
||||
#define MSG_SET_HOME_OFFSETS "Zet home offsets"
|
||||
#define MSG_HOME_OFFSETS_APPLIED "H offset toegep."
|
||||
#define MSG_SET_ORIGIN "Nulpunt instellen"
|
||||
#define MSG_PREHEAT_1 "PLA voorverwarmen"
|
||||
#define MSG_PREHEAT_1_N "PLA voorverw. "
|
||||
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1_N "aan"
|
||||
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1_N "Bed"
|
||||
#define MSG_PREHEAT_1_SETTINGS "PLA verw. conf"
|
||||
#define MSG_PREHEAT_2 "ABS voorverwarmen"
|
||||
#define MSG_PREHEAT_2_N "ABS voorverw. "
|
||||
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2_N "aan"
|
||||
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2_N "Bed"
|
||||
#define MSG_PREHEAT_2_SETTINGS "ABS verw. conf"
|
||||
#define MSG_COOLDOWN "Afkoelen"
|
||||
#define MSG_SWITCH_PS_ON "Stroom aan"
|
||||
#define MSG_SWITCH_PS_OFF "Stroom uit"
|
||||
#define MSG_EXTRUDE "Extrude"
|
||||
#define MSG_RETRACT "Retract"
|
||||
#define MSG_MOVE_AXIS "As verplaatsen"
|
||||
#define MSG_LEVEL_BED "Level bed"
|
||||
#define MSG_MOVE_X "Verplaats X"
|
||||
#define MSG_MOVE_Y "Verplaats Y"
|
||||
#define MSG_MOVE_Z "Verplaats Z"
|
||||
#define MSG_MOVE_E "Extruder"
|
||||
#define MSG_MOVE_01MM "Verplaats 0.1mm"
|
||||
#define MSG_MOVE_1MM "Verplaats 1mm"
|
||||
#define MSG_MOVE_10MM "Verplaats 10mm"
|
||||
#define MSG_SPEED "Snelheid"
|
||||
#define MSG_BED_Z "Bed Z"
|
||||
#define MSG_NOZZLE "Nozzle"
|
||||
#define MSG_BED "Bed"
|
||||
#define MSG_FAN_SPEED "Fan snelheid"
|
||||
#define MSG_FLOW "Flow"
|
||||
#define MSG_CONTROL "Control"
|
||||
#define MSG_MIN " " LCD_STR_THERMOMETER " Min"
|
||||
#define MSG_MAX " " LCD_STR_THERMOMETER " Max"
|
||||
#define MSG_FACTOR " " LCD_STR_THERMOMETER " Fact"
|
||||
#define MSG_AUTOTEMP "Autotemp"
|
||||
#define MSG_ON "Aan "
|
||||
#define MSG_OFF "Uit"
|
||||
#define MSG_PID_P "PID-P"
|
||||
#define MSG_PID_I "PID-I"
|
||||
#define MSG_PID_D "PID-D"
|
||||
#define MSG_PID_C "PID-C"
|
||||
#define MSG_SELECT "Selecteer"
|
||||
#define MSG_ACC "Versn"
|
||||
#define MSG_VX_JERK "Vx-jerk"
|
||||
#define MSG_VY_JERK "Vy-jerk"
|
||||
#define MSG_VZ_JERK "Vz-jerk"
|
||||
#define MSG_VE_JERK "Ve-jerk"
|
||||
#define MSG_VMAX "Vmax "
|
||||
#define MSG_VMIN "Vmin"
|
||||
#define MSG_VTRAV_MIN "VTrav min"
|
||||
#define MSG_AMAX "Amax "
|
||||
#define MSG_A_RETRACT "A-retract"
|
||||
#define MSG_A_TRAVEL "A-travel"
|
||||
#define MSG_XSTEPS "Xsteps/mm"
|
||||
#define MSG_YSTEPS "Ysteps/mm"
|
||||
#define MSG_ZSTEPS "Zsteps/mm"
|
||||
#define MSG_ESTEPS "Esteps/mm"
|
||||
#define MSG_E1STEPS "E1steps/mm"
|
||||
#define MSG_E2STEPS "E2steps/mm"
|
||||
#define MSG_E3STEPS "E3steps/mm"
|
||||
#define MSG_E4STEPS "E4steps/mm"
|
||||
#define MSG_TEMPERATURE "Temperatuur"
|
||||
#define MSG_MOTION "Beweging"
|
||||
#define MSG_VOLUMETRIC "Filament"
|
||||
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
|
||||
#define MSG_FILAMENT_DIAM "Fil. Dia."
|
||||
#define MSG_CONTRAST "LCD contrast"
|
||||
#define MSG_STORE_EPROM "Geheugen opslaan"
|
||||
#define MSG_LOAD_EPROM "Geheugen laden"
|
||||
#define MSG_RESTORE_FAILSAFE "Noodstop reset"
|
||||
#define MSG_REFRESH "Ververs"
|
||||
#define MSG_WATCH "Info scherm"
|
||||
#define MSG_PREPARE "Voorbereiden"
|
||||
#define MSG_TUNE "Afstellen"
|
||||
#define MSG_PAUSE_PRINT "Print pauzeren"
|
||||
#define MSG_RESUME_PRINT "Print hervatten"
|
||||
#define MSG_STOP_PRINT "Print stoppen"
|
||||
#define MSG_CARD_MENU "Print van SD"
|
||||
#define MSG_NO_CARD "Geen SD kaart"
|
||||
#define MSG_DWELL "Slapen..."
|
||||
#define MSG_USERWAIT "Wachten..."
|
||||
#define MSG_RESUMING "Print hervatten"
|
||||
#define MSG_PRINT_ABORTED "Print afgebroken"
|
||||
#define MSG_NO_MOVE "Geen beweging."
|
||||
#define MSG_KILLED "Afgebroken. "
|
||||
#define MSG_STOPPED "Gestopt. "
|
||||
#define MSG_CONTROL_RETRACT "Retract mm" //accepted English term in Dutch
|
||||
#define MSG_CONTROL_RETRACT_SWAP "Ruil Retract mm"
|
||||
#define MSG_CONTROL_RETRACTF "Retract F"
|
||||
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Ruil UnRet +mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"
|
||||
#define MSG_AUTORETRACT "AutoRetr."
|
||||
#define MSG_FILAMENTCHANGE "Verv. Filament"
|
||||
#define MSG_INIT_SDCARD "Init. SD kaart"
|
||||
#define MSG_CNG_SDCARD "Verv. SD Kaart"
|
||||
#define MSG_ZPROBE_OUT "Z probe uit. bed"
|
||||
#define MSG_BLTOUCH_SELFTEST "BLTouch Zelf-Test"
|
||||
#define MSG_BLTOUCH_RESET "Reset BLTouch"
|
||||
#define MSG_HOME "Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
|
||||
#define MSG_FIRST "Eerst"
|
||||
#define MSG_ZPROBE_ZOFFSET "Z Offset" //accepted English term in Dutch
|
||||
#define MSG_BABYSTEP_X "Babystap X"
|
||||
#define MSG_BABYSTEP_Y "Babystap Y"
|
||||
#define MSG_BABYSTEP_Z "Babystap Z"
|
||||
#define MSG_ENDSTOP_ABORT "Endstop afbr."
|
||||
#define MSG_HEATING_FAILED_LCD "Voorverw. fout"
|
||||
#define MSG_ERR_REDUNDANT_TEMP "Redun. temp fout"
|
||||
#define MSG_THERMAL_RUNAWAY "Therm. wegloop"
|
||||
#define MSG_ERR_MAXTEMP "Err: Max. temp"
|
||||
#define MSG_ERR_MINTEMP "Err: Min. temp"
|
||||
#define MSG_ERR_MAXTEMP_BED "Err: Max.tmp bed"
|
||||
#define MSG_ERR_MINTEMP_BED "Err: Min.tmp bed"
|
||||
#define MSG_ERR_Z_HOMING "Fout Z homing"
|
||||
#define MSG_HALTED "PRINTER GESTOPT"
|
||||
#define MSG_PLEASE_RESET "Reset A.U.B."
|
||||
#define MSG_SHORT_DAY "d" // One character only. Keep English standard
|
||||
#define MSG_SHORT_HOUR "h" // One character only
|
||||
#define MSG_SHORT_MINUTE "m" // One character only
|
||||
#define MSG_HEATING "Voorwarmen..."
|
||||
#define MSG_HEATING_COMPLETE "Voorverw. kompl."
|
||||
#define MSG_BED_HEATING "Bed voorverw."
|
||||
#define MSG_BED_DONE "Bed is voorverw."
|
||||
#define MSG_DELTA_CALIBRATE "Delta Calibratie"
|
||||
#define MSG_DELTA_CALIBRATE_X "Kalibreer X"
|
||||
#define MSG_DELTA_CALIBRATE_Y "Kalibreer Y"
|
||||
#define MSG_DELTA_CALIBRATE_Z "Kalibreer Z"
|
||||
#define MSG_DELTA_CALIBRATE_CENTER "Kalibreer Midden"
|
||||
#define WELCOME_MSG MACHINE_NAME _UxGT(" gereed.")
|
||||
#define MSG_SD_INSERTED _UxGT("Kaart ingestoken")
|
||||
#define MSG_SD_REMOVED _UxGT("Kaart verwijderd")
|
||||
#define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters
|
||||
#define MSG_MAIN _UxGT("Hoofdmenu")
|
||||
#define MSG_AUTOSTART _UxGT("Autostart")
|
||||
#define MSG_DISABLE_STEPPERS _UxGT("Motoren uit")
|
||||
#define MSG_AUTO_HOME _UxGT("Auto home")
|
||||
#define MSG_AUTO_HOME_X _UxGT("Home X")
|
||||
#define MSG_AUTO_HOME_Y _UxGT("Home Y")
|
||||
#define MSG_AUTO_HOME_Z _UxGT("Home Z")
|
||||
#define MSG_LEVEL_BED_HOMING _UxGT("Homing XYZ")
|
||||
#define MSG_LEVEL_BED_WAITING _UxGT("Klik voor begin")
|
||||
#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Volgende Plaats")
|
||||
#define MSG_LEVEL_BED_DONE _UxGT("Bed level kompl.")
|
||||
#define MSG_LEVEL_BED_CANCEL _UxGT("Bed level afbr.")
|
||||
#define MSG_SET_HOME_OFFSETS _UxGT("Zet home offsets")
|
||||
#define MSG_HOME_OFFSETS_APPLIED _UxGT("H offset toegep.")
|
||||
#define MSG_SET_ORIGIN _UxGT("Nulpunt instellen")
|
||||
#define MSG_PREHEAT_1 _UxGT("PLA voorverwarmen")
|
||||
#define MSG_PREHEAT_1_N _UxGT("PLA voorverw. ")
|
||||
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1_N _UxGT("aan")
|
||||
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1_N _UxGT("Bed")
|
||||
#define MSG_PREHEAT_1_SETTINGS _UxGT("PLA verw. conf")
|
||||
#define MSG_PREHEAT_2 _UxGT("ABS voorverwarmen")
|
||||
#define MSG_PREHEAT_2_N _UxGT("ABS voorverw. ")
|
||||
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2_N _UxGT("aan")
|
||||
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2_N _UxGT("Bed")
|
||||
#define MSG_PREHEAT_2_SETTINGS _UxGT("ABS verw. conf")
|
||||
#define MSG_COOLDOWN _UxGT("Afkoelen")
|
||||
#define MSG_SWITCH_PS_ON _UxGT("Stroom aan")
|
||||
#define MSG_SWITCH_PS_OFF _UxGT("Stroom uit")
|
||||
#define MSG_EXTRUDE _UxGT("Extrude")
|
||||
#define MSG_RETRACT _UxGT("Retract")
|
||||
#define MSG_MOVE_AXIS _UxGT("As verplaatsen")
|
||||
#define MSG_LEVEL_BED _UxGT("Level bed")
|
||||
#define MSG_MOVE_X _UxGT("Verplaats X")
|
||||
#define MSG_MOVE_Y _UxGT("Verplaats Y")
|
||||
#define MSG_MOVE_Z _UxGT("Verplaats Z")
|
||||
#define MSG_MOVE_E _UxGT("Extruder")
|
||||
#define MSG_MOVE_01MM _UxGT("Verplaats 0.1mm")
|
||||
#define MSG_MOVE_1MM _UxGT("Verplaats 1mm")
|
||||
#define MSG_MOVE_10MM _UxGT("Verplaats 10mm")
|
||||
#define MSG_SPEED _UxGT("Snelheid")
|
||||
#define MSG_BED_Z _UxGT("Bed Z")
|
||||
#define MSG_NOZZLE _UxGT("Nozzle")
|
||||
#define MSG_BED _UxGT("Bed")
|
||||
#define MSG_FAN_SPEED _UxGT("Fan snelheid")
|
||||
#define MSG_FLOW _UxGT("Flow")
|
||||
#define MSG_CONTROL _UxGT("Control")
|
||||
#define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Min")
|
||||
#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Max")
|
||||
#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Fact")
|
||||
#define MSG_AUTOTEMP _UxGT("Autotemp")
|
||||
#define MSG_ON _UxGT("Aan ")
|
||||
#define MSG_OFF _UxGT("Uit")
|
||||
#define MSG_PID_P _UxGT("PID-P")
|
||||
#define MSG_PID_I _UxGT("PID-I")
|
||||
#define MSG_PID_D _UxGT("PID-D")
|
||||
#define MSG_PID_C _UxGT("PID-C")
|
||||
#define MSG_SELECT _UxGT("Selecteer")
|
||||
#define MSG_ACC _UxGT("Versn")
|
||||
#define MSG_VX_JERK _UxGT("Vx-jerk")
|
||||
#define MSG_VY_JERK _UxGT("Vy-jerk")
|
||||
#define MSG_VZ_JERK _UxGT("Vz-jerk")
|
||||
#define MSG_VE_JERK _UxGT("Ve-jerk")
|
||||
#define MSG_VMAX _UxGT("Vmax ")
|
||||
#define MSG_VMIN _UxGT("Vmin")
|
||||
#define MSG_VTRAV_MIN _UxGT("VTrav min")
|
||||
#define MSG_AMAX _UxGT("Amax ")
|
||||
#define MSG_A_RETRACT _UxGT("A-retract")
|
||||
#define MSG_A_TRAVEL _UxGT("A-travel")
|
||||
#define MSG_XSTEPS _UxGT("Xsteps/mm")
|
||||
#define MSG_YSTEPS _UxGT("Ysteps/mm")
|
||||
#define MSG_ZSTEPS _UxGT("Zsteps/mm")
|
||||
#define MSG_ESTEPS _UxGT("Esteps/mm")
|
||||
#define MSG_E1STEPS _UxGT("E1steps/mm")
|
||||
#define MSG_E2STEPS _UxGT("E2steps/mm")
|
||||
#define MSG_E3STEPS _UxGT("E3steps/mm")
|
||||
#define MSG_E4STEPS _UxGT("E4steps/mm")
|
||||
#define MSG_TEMPERATURE _UxGT("Temperatuur")
|
||||
#define MSG_MOTION _UxGT("Beweging")
|
||||
#define MSG_VOLUMETRIC _UxGT("Filament")
|
||||
#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3")
|
||||
#define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.")
|
||||
#define MSG_CONTRAST _UxGT("LCD contrast")
|
||||
#define MSG_STORE_EPROM _UxGT("Geheugen opslaan")
|
||||
#define MSG_LOAD_EPROM _UxGT("Geheugen laden")
|
||||
#define MSG_RESTORE_FAILSAFE _UxGT("Noodstop reset")
|
||||
#define MSG_REFRESH _UxGT("Ververs")
|
||||
#define MSG_WATCH _UxGT("Info scherm")
|
||||
#define MSG_PREPARE _UxGT("Voorbereiden")
|
||||
#define MSG_TUNE _UxGT("Afstellen")
|
||||
#define MSG_PAUSE_PRINT _UxGT("Print pauzeren")
|
||||
#define MSG_RESUME_PRINT _UxGT("Print hervatten")
|
||||
#define MSG_STOP_PRINT _UxGT("Print stoppen")
|
||||
#define MSG_CARD_MENU _UxGT("Print van SD")
|
||||
#define MSG_NO_CARD _UxGT("Geen SD kaart")
|
||||
#define MSG_DWELL _UxGT("Slapen...")
|
||||
#define MSG_USERWAIT _UxGT("Wachten...")
|
||||
#define MSG_RESUMING _UxGT("Print hervatten")
|
||||
#define MSG_PRINT_ABORTED _UxGT("Print afgebroken")
|
||||
#define MSG_NO_MOVE _UxGT("Geen beweging.")
|
||||
#define MSG_KILLED _UxGT("Afgebroken. ")
|
||||
#define MSG_STOPPED _UxGT("Gestopt. ")
|
||||
#define MSG_CONTROL_RETRACT _UxGT("Retract mm") //accepted English term in Dutch
|
||||
#define MSG_CONTROL_RETRACT_SWAP _UxGT("Ruil Retract mm")
|
||||
#define MSG_CONTROL_RETRACTF _UxGT("Retract F")
|
||||
#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Hop mm")
|
||||
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet +mm")
|
||||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Ruil UnRet +mm")
|
||||
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet F")
|
||||
#define MSG_AUTORETRACT _UxGT("AutoRetr.")
|
||||
#define MSG_FILAMENTCHANGE _UxGT("Verv. Filament")
|
||||
#define MSG_INIT_SDCARD _UxGT("Init. SD kaart")
|
||||
#define MSG_CNG_SDCARD _UxGT("Verv. SD Kaart")
|
||||
#define MSG_ZPROBE_OUT _UxGT("Z probe uit. bed")
|
||||
#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Zelf-Test")
|
||||
#define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch")
|
||||
#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
|
||||
#define MSG_FIRST _UxGT("Eerst")
|
||||
#define MSG_ZPROBE_ZOFFSET _UxGT("Z Offset") //accepted English term in Dutch
|
||||
#define MSG_BABYSTEP_X _UxGT("Babystap X")
|
||||
#define MSG_BABYSTEP_Y _UxGT("Babystap Y")
|
||||
#define MSG_BABYSTEP_Z _UxGT("Babystap Z")
|
||||
#define MSG_ENDSTOP_ABORT _UxGT("Endstop afbr.")
|
||||
#define MSG_HEATING_FAILED_LCD _UxGT("Voorverw. fout")
|
||||
#define MSG_ERR_REDUNDANT_TEMP _UxGT("Redun. temp fout")
|
||||
#define MSG_THERMAL_RUNAWAY _UxGT("Therm. wegloop")
|
||||
#define MSG_ERR_MAXTEMP _UxGT("Err: Max. temp")
|
||||
#define MSG_ERR_MINTEMP _UxGT("Err: Min. temp")
|
||||
#define MSG_ERR_MAXTEMP_BED _UxGT("Err: Max.tmp bed")
|
||||
#define MSG_ERR_MINTEMP_BED _UxGT("Err: Min.tmp bed")
|
||||
#define MSG_ERR_Z_HOMING _UxGT("Fout Z homing")
|
||||
#define MSG_HALTED _UxGT("PRINTER GESTOPT")
|
||||
#define MSG_PLEASE_RESET _UxGT("Reset A.U.B.")
|
||||
#define MSG_SHORT_DAY _UxGT("d") // One character only. Keep English standard
|
||||
#define MSG_SHORT_HOUR _UxGT("h") // One character only
|
||||
#define MSG_SHORT_MINUTE _UxGT("m") // One character only
|
||||
#define MSG_HEATING _UxGT("Voorwarmen...")
|
||||
#define MSG_HEATING_COMPLETE _UxGT("Voorverw. kompl.")
|
||||
#define MSG_BED_HEATING _UxGT("Bed voorverw.")
|
||||
#define MSG_BED_DONE _UxGT("Bed is voorverw.")
|
||||
#define MSG_DELTA_CALIBRATE _UxGT("Delta Calibratie")
|
||||
#define MSG_DELTA_CALIBRATE_X _UxGT("Kalibreer X")
|
||||
#define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibreer Y")
|
||||
#define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibreer Z")
|
||||
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibreer Midden")
|
||||
|
||||
#define MSG_INFO_STATS_MENU "Printer Stats"
|
||||
#define MSG_INFO_BOARD_MENU "Board Info" //accepted English term in Dutch
|
||||
#define MSG_INFO_THERMISTOR_MENU "Thermistors"
|
||||
#define MSG_INFO_EXTRUDERS "Extruders"
|
||||
#define MSG_INFO_BAUDRATE "Baud"
|
||||
#define MSG_INFO_MENU "Over Printer"
|
||||
#define MSG_INFO_PRINTER_MENU "Printer Info"
|
||||
#define MSG_INFO_PROTOCOL "Protocol"
|
||||
#define MSG_LIGHTS_ON "Case licht aan"
|
||||
#define MSG_LIGHTS_OFF "Case licht uit"
|
||||
#define MSG_INFO_STATS_MENU _UxGT("Printer Stats")
|
||||
#define MSG_INFO_BOARD_MENU _UxGT("Board Info") //accepted English term in Dutch
|
||||
#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistors")
|
||||
#define MSG_INFO_EXTRUDERS _UxGT("Extruders")
|
||||
#define MSG_INFO_BAUDRATE _UxGT("Baud")
|
||||
#define MSG_INFO_MENU _UxGT("Over Printer")
|
||||
#define MSG_INFO_PRINTER_MENU _UxGT("Printer Info")
|
||||
#define MSG_INFO_PROTOCOL _UxGT("Protocol")
|
||||
#define MSG_LIGHTS_ON _UxGT("Case licht aan")
|
||||
#define MSG_LIGHTS_OFF _UxGT("Case licht uit")
|
||||
|
||||
#if LCD_WIDTH >= 20
|
||||
#define MSG_INFO_PRINT_COUNT "Printed Aantal"
|
||||
#define MSG_INFO_COMPLETED_PRINTS "Totaal Voltooid"
|
||||
#define MSG_INFO_PRINT_TIME "Totale Printtijd"
|
||||
#define MSG_INFO_PRINT_LONGEST "Langste Printtijd"
|
||||
#define MSG_INFO_PRINT_FILAMENT "Totaal Extrudeert"
|
||||
#define MSG_INFO_PRINT_COUNT _UxGT("Printed Aantal")
|
||||
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Totaal Voltooid")
|
||||
#define MSG_INFO_PRINT_TIME _UxGT("Totale Printtijd")
|
||||
#define MSG_INFO_PRINT_LONGEST _UxGT("Langste Printtijd")
|
||||
#define MSG_INFO_PRINT_FILAMENT _UxGT("Totaal Extrudeert")
|
||||
#else
|
||||
#define MSG_INFO_PRINT_COUNT "Aantal"
|
||||
#define MSG_INFO_COMPLETED_PRINTS "Voltooid"
|
||||
#define MSG_INFO_PRINT_TIME "Printtijd "
|
||||
#define MSG_INFO_PRINT_LONGEST "Langste"
|
||||
#define MSG_INFO_PRINT_FILAMENT "Extrud."
|
||||
#define MSG_INFO_PRINT_COUNT _UxGT("Aantal")
|
||||
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Voltooid")
|
||||
#define MSG_INFO_PRINT_TIME _UxGT("Printtijd ")
|
||||
#define MSG_INFO_PRINT_LONGEST _UxGT("Langste")
|
||||
#define MSG_INFO_PRINT_FILAMENT _UxGT("Extrud.")
|
||||
#endif
|
||||
|
||||
#define MSG_INFO_MIN_TEMP "Min Temp"
|
||||
#define MSG_INFO_MAX_TEMP "Max Temp"
|
||||
#define MSG_INFO_PSU "Power Supply" //accepted English term in Dutch
|
||||
#define MSG_INFO_MIN_TEMP _UxGT("Min Temp")
|
||||
#define MSG_INFO_MAX_TEMP _UxGT("Max Temp")
|
||||
#define MSG_INFO_PSU _UxGT("Power Supply") //accepted English term in Dutch
|
||||
|
||||
#define MSG_DRIVE_STRENGTH "Motorstroom"
|
||||
#define MSG_DAC_PERCENT "Driver %" //accepted English term in Dutch
|
||||
#define MSG_DAC_EEPROM_WRITE "DAC Opslaan"
|
||||
#define MSG_FILAMENT_CHANGE_HEADER "WISSEL FILAMENT"
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_HEADER "WISSEL OPTIES:"
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "Extrudeer meer"
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME "Hervat print"
|
||||
#define MSG_DRIVE_STRENGTH _UxGT("Motorstroom")
|
||||
#define MSG_DAC_PERCENT _UxGT("Driver %") //accepted English term in Dutch
|
||||
#define MSG_DAC_EEPROM_WRITE _UxGT("DAC Opslaan")
|
||||
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("WISSEL FILAMENT")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("WISSEL OPTIES:")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extrudeer meer")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Hervat print")
|
||||
|
||||
//
|
||||
// Filament Change screens show up to 3 lines on a 4-line display
|
||||
@ -224,38 +224,38 @@
|
||||
//
|
||||
#if LCD_HEIGHT >= 4
|
||||
// Up to 3 lines
|
||||
#define MSG_FILAMENT_CHANGE_INIT_1 "Wacht voor start"
|
||||
#define MSG_FILAMENT_CHANGE_INIT_2 "filament te"
|
||||
#define MSG_FILAMENT_CHANGE_INIT_3 "verwisselen"
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Wacht voor"
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_2 "filament uit"
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_3 "te laden"
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_1 "Laad filament"
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_2 "en druk knop"
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_3 "om verder..."
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 "Wacht voor"
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_2 "filament te"
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_3 "laden"
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Wacht voor"
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 "filament te"
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 "extruderen"
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 "Wacht voor print"
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_2 "om verder"
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_3 "te gaan"
|
||||
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Wacht voor start")
|
||||
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("filament te")
|
||||
#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("verwisselen")
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wacht voor")
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("filament uit")
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("te laden")
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Laad filament")
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("en druk knop")
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("om verder...")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Wacht voor")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament te")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("laden")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Wacht voor")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("filament te")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 _UxGT("extruderen")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wacht voor print")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("om verder")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("te gaan")
|
||||
#else // LCD_HEIGHT < 4
|
||||
// Up to 2 lines
|
||||
#define MSG_FILAMENT_CHANGE_INIT_1 "Wacht voor"
|
||||
#define MSG_FILAMENT_CHANGE_INIT_2 "start..."
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Wacht voor"
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_2 "uitladen..."
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_1 "Laad filament"
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_2 "en druk knop"
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 "Wacht voor"
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_2 "inladen..."
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Wacht voor"
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 "extrudering"
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 "Wacht voor"
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_2 "printing..."
|
||||
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Wacht voor")
|
||||
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("start...")
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wacht voor")
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("uitladen...")
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Laad filament")
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("en druk knop")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Wacht voor")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("inladen...")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Wacht voor")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("extrudering")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wacht voor")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("printing...")
|
||||
#endif // LCD_HEIGHT < 4
|
||||
|
||||
#endif // LANGUAGE_NL_H
|
||||
|
||||
Reference in New Issue
Block a user