tag the utf-8 strings
This commit is contained in:
yhfudev
@ -33,220 +33,220 @@
|
||||
#define MAPPER_C2C3
|
||||
#define DISPLAY_CHARSET_ISO10646_1
|
||||
|
||||
#define WELCOME_MSG MACHINE_NAME " bereit"
|
||||
#define MSG_SD_INSERTED "SD-Karte erkannt"
|
||||
#define MSG_SD_REMOVED "SD-Karte entfernt"
|
||||
#define MSG_LCD_ENDSTOPS "Endstopp" // Max length 8 characters
|
||||
#define MSG_MAIN "Hauptmenü"
|
||||
#define MSG_AUTOSTART "Autostart"
|
||||
#define MSG_DISABLE_STEPPERS "Motoren deaktivieren" // M84
|
||||
#define MSG_AUTO_HOME "Home" // G28
|
||||
#define MSG_AUTO_HOME_X "Home X"
|
||||
#define MSG_AUTO_HOME_Y "Home Y"
|
||||
#define MSG_AUTO_HOME_Z "Home Z"
|
||||
#define MSG_LEVEL_BED_HOMING "Homing XYZ"
|
||||
#define MSG_LEVEL_BED_WAITING "Klick für Start"
|
||||
#define MSG_LEVEL_BED_NEXT_POINT "Nächste Koordinate"
|
||||
#define MSG_LEVEL_BED_DONE "Fertig"
|
||||
#define MSG_LEVEL_BED_CANCEL "Abbruch"
|
||||
#define MSG_SET_HOME_OFFSETS "Setze Homeversatz"
|
||||
#define MSG_HOME_OFFSETS_APPLIED "Homeversatz aktiv"
|
||||
#define MSG_SET_ORIGIN "Setze Nullpunkt" //"G92 X0 Y0 Z0" commented out in ultralcd.cpp
|
||||
#define MSG_PREHEAT_1 "Vorwärmen PLA"
|
||||
#define MSG_PREHEAT_1_N "Vorwärmen PLA "
|
||||
#define MSG_PREHEAT_1_ALL "Vorw. PLA Alle"
|
||||
#define MSG_PREHEAT_1_BEDONLY "Vorw. PLA Bett"
|
||||
#define MSG_PREHEAT_1_SETTINGS "Vorw. PLA Einst."
|
||||
#define MSG_PREHEAT_2 "Vorwärmen ABS"
|
||||
#define MSG_PREHEAT_2_N "Vorwärmen ABS "
|
||||
#define MSG_PREHEAT_2_ALL "Vorw. ABS Alle"
|
||||
#define MSG_PREHEAT_2_BEDONLY "Vorw. ABS Bett"
|
||||
#define MSG_PREHEAT_2_SETTINGS "Vorw. ABS Einst."
|
||||
#define MSG_COOLDOWN "Abkühlen"
|
||||
#define MSG_SWITCH_PS_ON "Netzteil ein"
|
||||
#define MSG_SWITCH_PS_OFF "Netzteil aus"
|
||||
#define MSG_EXTRUDE "Extrudieren"
|
||||
#define MSG_RETRACT "Retract"
|
||||
#define MSG_MOVE_AXIS "Bewegen"
|
||||
#define MSG_LEVEL_BED "Bett nivellieren"
|
||||
#define MSG_MOVE_X "X"
|
||||
#define MSG_MOVE_Y "Y"
|
||||
#define MSG_MOVE_Z "Z"
|
||||
#define MSG_MOVE_E "Extruder "
|
||||
#define MSG_MOVE_01MM " 0,1 mm"
|
||||
#define MSG_MOVE_1MM " 1,0 mm"
|
||||
#define MSG_MOVE_10MM "10,0 mm"
|
||||
#define MSG_SPEED "Geschw."
|
||||
#define MSG_BED_Z "Bett Z"
|
||||
#define MSG_NOZZLE "Düse"
|
||||
#define MSG_BED "Bett"
|
||||
#define MSG_FAN_SPEED "Lüfter"
|
||||
#define MSG_FLOW "Durchfluss"
|
||||
#define MSG_CONTROL "Einstellungen"
|
||||
#define MSG_MIN LCD_STR_THERMOMETER " min"
|
||||
#define MSG_MAX LCD_STR_THERMOMETER " max"
|
||||
#define MSG_FACTOR LCD_STR_THERMOMETER " Faktor"
|
||||
#define MSG_AUTOTEMP "AutoTemp"
|
||||
#define MSG_ON "Ein"
|
||||
#define MSG_OFF "Aus"
|
||||
#define MSG_PID_P "PID P"
|
||||
#define MSG_PID_I "PID I"
|
||||
#define MSG_PID_D "PID D"
|
||||
#define MSG_PID_C "PID C"
|
||||
#define MSG_SELECT "Auswählen"
|
||||
#define MSG_ACC "A"
|
||||
#define MSG_VX_JERK "V X Jerk"
|
||||
#define MSG_VY_JERK "V Y Jerk"
|
||||
#define MSG_VZ_JERK "V Z Jerk"
|
||||
#define MSG_VE_JERK "V E Jerk"
|
||||
#define MSG_VMAX "V max " // space by purpose
|
||||
#define MSG_VMIN "V min"
|
||||
#define MSG_VTRAV_MIN "V min Leerfahrt"
|
||||
#define MSG_AMAX "A max " // space by purpose
|
||||
#define MSG_A_RETRACT "A Retract"
|
||||
#define MSG_A_TRAVEL "A Leerfahrt"
|
||||
#define MSG_XSTEPS "X Steps/mm"
|
||||
#define MSG_YSTEPS "Y Steps/mm"
|
||||
#define MSG_ZSTEPS "Z Steps/mm"
|
||||
#define MSG_ESTEPS "E Steps/mm"
|
||||
#define MSG_E1STEPS "E1 Steps/mm"
|
||||
#define MSG_E2STEPS "E2 Steps/mm"
|
||||
#define MSG_E3STEPS "E3 Steps/mm"
|
||||
#define MSG_E4STEPS "E4 Steps/mm"
|
||||
#define MSG_TEMPERATURE "Temperatur"
|
||||
#define MSG_MOTION "Bewegung"
|
||||
#define MSG_VOLUMETRIC "Filament"
|
||||
#define MSG_VOLUMETRIC_ENABLED "E in mm³"
|
||||
#define MSG_FILAMENT_DIAM "D Fil."
|
||||
#define MSG_CONTRAST "LCD Kontrast"
|
||||
#define MSG_STORE_EPROM "EPROM speichern"
|
||||
#define MSG_LOAD_EPROM "EPROM laden"
|
||||
#define MSG_RESTORE_FAILSAFE "Standardkonfiguration"
|
||||
#define MSG_REFRESH "Aktualisieren"
|
||||
#define MSG_WATCH "Info"
|
||||
#define MSG_PREPARE "Vorbereitung"
|
||||
#define MSG_TUNE "Justierung"
|
||||
#define MSG_PAUSE_PRINT "SD-Druck Pause"
|
||||
#define MSG_RESUME_PRINT "SD-Druck Fortsetzung"
|
||||
#define MSG_STOP_PRINT "SD-Druck Abbruch"
|
||||
#define MSG_CARD_MENU "SD-Karte"
|
||||
#define MSG_NO_CARD "Keine SD-Karte"
|
||||
#define MSG_DWELL "Warten..."
|
||||
#define MSG_USERWAIT "Warte auf Nutzer"
|
||||
#define MSG_RESUMING "Druckfortsetzung"
|
||||
#define MSG_PRINT_ABORTED "Druck abgebrochen"
|
||||
#define MSG_NO_MOVE "Motoren eingeschaltet"
|
||||
#define MSG_KILLED "ABGEBROCHEN"
|
||||
#define MSG_STOPPED "ANGEHALTEN"
|
||||
#define MSG_CONTROL_RETRACT "Retract mm"
|
||||
#define MSG_CONTROL_RETRACT_SWAP "Wechs. Retract mm"
|
||||
#define MSG_CONTROL_RETRACTF "Retract V"
|
||||
#define MSG_CONTROL_RETRACT_ZLIFT "Z-Hop mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Wechs. UnRet +mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
|
||||
#define MSG_AUTORETRACT "AutoRetract"
|
||||
#define MSG_FILAMENTCHANGE "Filament wechseln"
|
||||
#define MSG_INIT_SDCARD "SD-Karte erkennen" // Manually initialize the SD-card via user interface
|
||||
#define MSG_CNG_SDCARD "SD-Karte getauscht" // SD-card changed by user. For machines with no autocarddetect. Both send "M21"
|
||||
#define MSG_ZPROBE_OUT "Sensor ausserhalb"
|
||||
#define MSG_BLTOUCH_SELFTEST "BLTouch Test"
|
||||
#define MSG_BLTOUCH_RESET "BLTouch Reset"
|
||||
#define MSG_HOME "Vorher" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
|
||||
#define MSG_FIRST "homen"
|
||||
#define MSG_ZPROBE_ZOFFSET "Z Versatz"
|
||||
#define MSG_BABYSTEP_X "Babystep X"
|
||||
#define MSG_BABYSTEP_Y "Babystep Y"
|
||||
#define MSG_BABYSTEP_Z "Babystep Z"
|
||||
#define MSG_ENDSTOP_ABORT "Endstopp-Abbr."
|
||||
#define MSG_HEATING_FAILED_LCD "HEIZEN FEHLGESCHLAGEN"
|
||||
#define MSG_ERR_REDUNDANT_TEMP "REDUND. TEMPERATURABWEICHUNG"
|
||||
#define MSG_THERMAL_RUNAWAY LCD_STR_THERMOMETER " NICHT ERREICHT"
|
||||
#define MSG_ERR_MAXTEMP LCD_STR_THERMOMETER " ÜBERSCHRITTEN"
|
||||
#define MSG_ERR_MINTEMP LCD_STR_THERMOMETER " UNTERSCHRITTEN"
|
||||
#define MSG_ERR_MAXTEMP_BED "BETT " LCD_STR_THERMOMETER " ÜBERSCHRITTEN"
|
||||
#define MSG_ERR_MINTEMP_BED "BETT " LCD_STR_THERMOMETER " UNTERSCHRITTEN"
|
||||
#define MSG_ERR_Z_HOMING "G28 Z verboten"
|
||||
#define MSG_HALTED "DRUCKER STOPP"
|
||||
#define MSG_PLEASE_RESET "Bitte Resetten"
|
||||
#define MSG_SHORT_DAY "t" // One character only
|
||||
#define MSG_SHORT_HOUR "h" // One character only
|
||||
#define MSG_SHORT_MINUTE "m" // One character only
|
||||
#define MSG_HEATING "Extr. heizt..."
|
||||
#define MSG_HEATING_COMPLETE "Extr. aufgeheizt"
|
||||
#define MSG_BED_HEATING "Bett heizt..."
|
||||
#define MSG_BED_DONE "Bett aufgeheizt"
|
||||
#define MSG_DELTA_CALIBRATE "Delta kalibrieren"
|
||||
#define MSG_DELTA_CALIBRATE_X "Kalibriere X"
|
||||
#define MSG_DELTA_CALIBRATE_Y "Kalibriere Y"
|
||||
#define MSG_DELTA_CALIBRATE_Z "Kalibriere Z"
|
||||
#define MSG_DELTA_CALIBRATE_CENTER "Kalibriere Mitte"
|
||||
#define WELCOME_MSG MACHINE_NAME _UxGT(" bereit")
|
||||
#define MSG_SD_INSERTED _UxGT("SD-Karte erkannt")
|
||||
#define MSG_SD_REMOVED _UxGT("SD-Karte entfernt")
|
||||
#define MSG_LCD_ENDSTOPS _UxGT("Endstopp") // Max length 8 characters
|
||||
#define MSG_MAIN _UxGT("Hauptmenü")
|
||||
#define MSG_AUTOSTART _UxGT("Autostart")
|
||||
#define MSG_DISABLE_STEPPERS _UxGT("Motoren deaktivieren") // M84
|
||||
#define MSG_AUTO_HOME _UxGT("Home") // G28
|
||||
#define MSG_AUTO_HOME_X _UxGT("Home X")
|
||||
#define MSG_AUTO_HOME_Y _UxGT("Home Y")
|
||||
#define MSG_AUTO_HOME_Z _UxGT("Home Z")
|
||||
#define MSG_LEVEL_BED_HOMING _UxGT("Homing XYZ")
|
||||
#define MSG_LEVEL_BED_WAITING _UxGT("Klick für Start")
|
||||
#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Nächste Koordinate")
|
||||
#define MSG_LEVEL_BED_DONE _UxGT("Fertig")
|
||||
#define MSG_LEVEL_BED_CANCEL _UxGT("Abbruch")
|
||||
#define MSG_SET_HOME_OFFSETS _UxGT("Setze Homeversatz")
|
||||
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Homeversatz aktiv")
|
||||
#define MSG_SET_ORIGIN _UxGT("Setze Nullpunkt") //"G92 X0 Y0 Z0" commented out in ultralcd.cpp
|
||||
#define MSG_PREHEAT_1 _UxGT("Vorwärmen PLA")
|
||||
#define MSG_PREHEAT_1_N _UxGT("Vorwärmen PLA ")
|
||||
#define MSG_PREHEAT_1_ALL _UxGT("Vorw. PLA Alle")
|
||||
#define MSG_PREHEAT_1_BEDONLY _UxGT("Vorw. PLA Bett")
|
||||
#define MSG_PREHEAT_1_SETTINGS _UxGT("Vorw. PLA Einst.")
|
||||
#define MSG_PREHEAT_2 _UxGT("Vorwärmen ABS")
|
||||
#define MSG_PREHEAT_2_N _UxGT("Vorwärmen ABS ")
|
||||
#define MSG_PREHEAT_2_ALL _UxGT("Vorw. ABS Alle")
|
||||
#define MSG_PREHEAT_2_BEDONLY _UxGT("Vorw. ABS Bett")
|
||||
#define MSG_PREHEAT_2_SETTINGS _UxGT("Vorw. ABS Einst.")
|
||||
#define MSG_COOLDOWN _UxGT("Abkühlen")
|
||||
#define MSG_SWITCH_PS_ON _UxGT("Netzteil ein")
|
||||
#define MSG_SWITCH_PS_OFF _UxGT("Netzteil aus")
|
||||
#define MSG_EXTRUDE _UxGT("Extrudieren")
|
||||
#define MSG_RETRACT _UxGT("Retract")
|
||||
#define MSG_MOVE_AXIS _UxGT("Bewegen")
|
||||
#define MSG_LEVEL_BED _UxGT("Bett nivellieren")
|
||||
#define MSG_MOVE_X _UxGT("X")
|
||||
#define MSG_MOVE_Y _UxGT("Y")
|
||||
#define MSG_MOVE_Z _UxGT("Z")
|
||||
#define MSG_MOVE_E _UxGT("Extruder ")
|
||||
#define MSG_MOVE_01MM _UxGT(" 0,1 mm")
|
||||
#define MSG_MOVE_1MM _UxGT(" 1,0 mm")
|
||||
#define MSG_MOVE_10MM _UxGT("10,0 mm")
|
||||
#define MSG_SPEED _UxGT("Geschw.")
|
||||
#define MSG_BED_Z _UxGT("Bett Z")
|
||||
#define MSG_NOZZLE _UxGT("Düse")
|
||||
#define MSG_BED _UxGT("Bett")
|
||||
#define MSG_FAN_SPEED _UxGT("Lüfter")
|
||||
#define MSG_FLOW _UxGT("Durchfluss")
|
||||
#define MSG_CONTROL _UxGT("Einstellungen")
|
||||
#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" min")
|
||||
#define MSG_MAX LCD_STR_THERMOMETER _UxGT(" max")
|
||||
#define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Faktor")
|
||||
#define MSG_AUTOTEMP _UxGT("AutoTemp")
|
||||
#define MSG_ON _UxGT("Ein")
|
||||
#define MSG_OFF _UxGT("Aus")
|
||||
#define MSG_PID_P _UxGT("PID P")
|
||||
#define MSG_PID_I _UxGT("PID I")
|
||||
#define MSG_PID_D _UxGT("PID D")
|
||||
#define MSG_PID_C _UxGT("PID C")
|
||||
#define MSG_SELECT _UxGT("Auswählen")
|
||||
#define MSG_ACC _UxGT("A")
|
||||
#define MSG_VX_JERK _UxGT("V X Jerk")
|
||||
#define MSG_VY_JERK _UxGT("V Y Jerk")
|
||||
#define MSG_VZ_JERK _UxGT("V Z Jerk")
|
||||
#define MSG_VE_JERK _UxGT("V E Jerk")
|
||||
#define MSG_VMAX _UxGT("V max ") // space by purpose
|
||||
#define MSG_VMIN _UxGT("V min")
|
||||
#define MSG_VTRAV_MIN _UxGT("V min Leerfahrt")
|
||||
#define MSG_AMAX _UxGT("A max ") // space by purpose
|
||||
#define MSG_A_RETRACT _UxGT("A Retract")
|
||||
#define MSG_A_TRAVEL _UxGT("A Leerfahrt")
|
||||
#define MSG_XSTEPS _UxGT("X Steps/mm")
|
||||
#define MSG_YSTEPS _UxGT("Y Steps/mm")
|
||||
#define MSG_ZSTEPS _UxGT("Z Steps/mm")
|
||||
#define MSG_ESTEPS _UxGT("E Steps/mm")
|
||||
#define MSG_E1STEPS _UxGT("E1 Steps/mm")
|
||||
#define MSG_E2STEPS _UxGT("E2 Steps/mm")
|
||||
#define MSG_E3STEPS _UxGT("E3 Steps/mm")
|
||||
#define MSG_E4STEPS _UxGT("E4 Steps/mm")
|
||||
#define MSG_TEMPERATURE _UxGT("Temperatur")
|
||||
#define MSG_MOTION _UxGT("Bewegung")
|
||||
#define MSG_VOLUMETRIC _UxGT("Filament")
|
||||
#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm³")
|
||||
#define MSG_FILAMENT_DIAM _UxGT("D Fil.")
|
||||
#define MSG_CONTRAST _UxGT("LCD Kontrast")
|
||||
#define MSG_STORE_EPROM _UxGT("EPROM speichern")
|
||||
#define MSG_LOAD_EPROM _UxGT("EPROM laden")
|
||||
#define MSG_RESTORE_FAILSAFE _UxGT("Standardkonfiguration")
|
||||
#define MSG_REFRESH _UxGT("Aktualisieren")
|
||||
#define MSG_WATCH _UxGT("Info")
|
||||
#define MSG_PREPARE _UxGT("Vorbereitung")
|
||||
#define MSG_TUNE _UxGT("Justierung")
|
||||
#define MSG_PAUSE_PRINT _UxGT("SD-Druck Pause")
|
||||
#define MSG_RESUME_PRINT _UxGT("SD-Druck Fortsetzung")
|
||||
#define MSG_STOP_PRINT _UxGT("SD-Druck Abbruch")
|
||||
#define MSG_CARD_MENU _UxGT("SD-Karte")
|
||||
#define MSG_NO_CARD _UxGT("Keine SD-Karte")
|
||||
#define MSG_DWELL _UxGT("Warten...")
|
||||
#define MSG_USERWAIT _UxGT("Warte auf Nutzer")
|
||||
#define MSG_RESUMING _UxGT("Druckfortsetzung")
|
||||
#define MSG_PRINT_ABORTED _UxGT("Druck abgebrochen")
|
||||
#define MSG_NO_MOVE _UxGT("Motoren eingeschaltet")
|
||||
#define MSG_KILLED _UxGT("ABGEBROCHEN")
|
||||
#define MSG_STOPPED _UxGT("ANGEHALTEN")
|
||||
#define MSG_CONTROL_RETRACT _UxGT("Retract mm")
|
||||
#define MSG_CONTROL_RETRACT_SWAP _UxGT("Wechs. Retract mm")
|
||||
#define MSG_CONTROL_RETRACTF _UxGT("Retract V")
|
||||
#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Z-Hop mm")
|
||||
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet +mm")
|
||||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Wechs. UnRet +mm")
|
||||
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V")
|
||||
#define MSG_AUTORETRACT _UxGT("AutoRetract")
|
||||
#define MSG_FILAMENTCHANGE _UxGT("Filament wechseln")
|
||||
#define MSG_INIT_SDCARD _UxGT("SD-Karte erkennen") // Manually initialize the SD-card via user interface
|
||||
#define MSG_CNG_SDCARD _UxGT("SD-Karte getauscht") // SD-card changed by user. For machines with no autocarddetect. Both send "M21"
|
||||
#define MSG_ZPROBE_OUT _UxGT("Sensor ausserhalb")
|
||||
#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Test")
|
||||
#define MSG_BLTOUCH_RESET _UxGT("BLTouch Reset")
|
||||
#define MSG_HOME _UxGT("Vorher") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
|
||||
#define MSG_FIRST _UxGT("homen")
|
||||
#define MSG_ZPROBE_ZOFFSET _UxGT("Z Versatz")
|
||||
#define MSG_BABYSTEP_X _UxGT("Babystep X")
|
||||
#define MSG_BABYSTEP_Y _UxGT("Babystep Y")
|
||||
#define MSG_BABYSTEP_Z _UxGT("Babystep Z")
|
||||
#define MSG_ENDSTOP_ABORT _UxGT("Endstopp-Abbr.")
|
||||
#define MSG_HEATING_FAILED_LCD _UxGT("HEIZEN FEHLGESCHLAGEN")
|
||||
#define MSG_ERR_REDUNDANT_TEMP _UxGT("REDUND. TEMPERATURABWEICHUNG")
|
||||
#define MSG_THERMAL_RUNAWAY LCD_STR_THERMOMETER _UxGT(" NICHT ERREICHT")
|
||||
#define MSG_ERR_MAXTEMP LCD_STR_THERMOMETER _UxGT(" ÜBERSCHRITTEN")
|
||||
#define MSG_ERR_MINTEMP LCD_STR_THERMOMETER _UxGT(" UNTERSCHRITTEN")
|
||||
#define MSG_ERR_MAXTEMP_BED _UxGT("BETT ") LCD_STR_THERMOMETER _UxGT(" ÜBERSCHRITTEN")
|
||||
#define MSG_ERR_MINTEMP_BED _UxGT("BETT ") LCD_STR_THERMOMETER _UxGT(" UNTERSCHRITTEN")
|
||||
#define MSG_ERR_Z_HOMING _UxGT("G28 Z verboten")
|
||||
#define MSG_HALTED _UxGT("DRUCKER STOPP")
|
||||
#define MSG_PLEASE_RESET _UxGT("Bitte Resetten")
|
||||
#define MSG_SHORT_DAY _UxGT("t") // One character only
|
||||
#define MSG_SHORT_HOUR _UxGT("h") // One character only
|
||||
#define MSG_SHORT_MINUTE _UxGT("m") // One character only
|
||||
#define MSG_HEATING _UxGT("Extr. heizt...")
|
||||
#define MSG_HEATING_COMPLETE _UxGT("Extr. aufgeheizt")
|
||||
#define MSG_BED_HEATING _UxGT("Bett heizt...")
|
||||
#define MSG_BED_DONE _UxGT("Bett aufgeheizt")
|
||||
#define MSG_DELTA_CALIBRATE _UxGT("Delta kalibrieren")
|
||||
#define MSG_DELTA_CALIBRATE_X _UxGT("Kalibriere X")
|
||||
#define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibriere Y")
|
||||
#define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibriere Z")
|
||||
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibriere Mitte")
|
||||
|
||||
#define MSG_INFO_MENU "Über den Drucker"
|
||||
#define MSG_INFO_PRINTER_MENU "Drucker Info"
|
||||
#define MSG_INFO_STATS_MENU "Drucker Stat."
|
||||
#define MSG_INFO_BOARD_MENU "Board Info"
|
||||
#define MSG_INFO_THERMISTOR_MENU "Thermistors"
|
||||
#define MSG_INFO_EXTRUDERS "Extruders"
|
||||
#define MSG_INFO_BAUDRATE "Baud"
|
||||
#define MSG_INFO_PROTOCOL "Protokoll"
|
||||
#define MSG_LIGHTS_ON "Gehäuse Licht an"
|
||||
#define MSG_LIGHTS_OFF "Gehäuse Licht aus"
|
||||
#define MSG_INFO_MENU _UxGT("Über den Drucker")
|
||||
#define MSG_INFO_PRINTER_MENU _UxGT("Drucker Info")
|
||||
#define MSG_INFO_STATS_MENU _UxGT("Drucker Stat.")
|
||||
#define MSG_INFO_BOARD_MENU _UxGT("Board Info")
|
||||
#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistors")
|
||||
#define MSG_INFO_EXTRUDERS _UxGT("Extruders")
|
||||
#define MSG_INFO_BAUDRATE _UxGT("Baud")
|
||||
#define MSG_INFO_PROTOCOL _UxGT("Protokoll")
|
||||
#define MSG_LIGHTS_ON _UxGT("Gehäuse Licht an")
|
||||
#define MSG_LIGHTS_OFF _UxGT("Gehäuse Licht aus")
|
||||
|
||||
#if LCD_WIDTH >= 20
|
||||
#define MSG_INFO_PRINT_COUNT "Gesamte Drucke"
|
||||
#define MSG_INFO_COMPLETED_PRINTS "Beendete Drucke"
|
||||
#define MSG_INFO_PRINT_TIME "Gesamte Druckzeit"
|
||||
#define MSG_INFO_PRINT_LONGEST "Längster Druckjob"
|
||||
#define MSG_INFO_PRINT_FILAMENT "Gesamt Extrudiert"
|
||||
#define MSG_INFO_PRINT_COUNT _UxGT("Gesamte Drucke")
|
||||
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Beendete Drucke")
|
||||
#define MSG_INFO_PRINT_TIME _UxGT("Gesamte Druckzeit")
|
||||
#define MSG_INFO_PRINT_LONGEST _UxGT("Längster Druckjob")
|
||||
#define MSG_INFO_PRINT_FILAMENT _UxGT("Gesamt Extrudiert")
|
||||
#else
|
||||
#define MSG_INFO_PRINT_COUNT "Drucke"
|
||||
#define MSG_INFO_COMPLETED_PRINTS "Komplett"
|
||||
#define MSG_INFO_PRINT_TIME "Gesamt "
|
||||
#define MSG_INFO_PRINT_LONGEST "Längster"
|
||||
#define MSG_INFO_PRINT_FILAMENT "Extrud."
|
||||
#define MSG_INFO_PRINT_COUNT _UxGT("Drucke")
|
||||
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Komplett")
|
||||
#define MSG_INFO_PRINT_TIME _UxGT("Gesamt ")
|
||||
#define MSG_INFO_PRINT_LONGEST _UxGT("Längster")
|
||||
#define MSG_INFO_PRINT_FILAMENT _UxGT("Extrud.")
|
||||
#endif
|
||||
#define MSG_INFO_MIN_TEMP "Min Temp"
|
||||
#define MSG_INFO_MAX_TEMP "Max Temp"
|
||||
#define MSG_INFO_PSU "Stromversorgung"
|
||||
#define MSG_INFO_MIN_TEMP _UxGT("Min Temp")
|
||||
#define MSG_INFO_MAX_TEMP _UxGT("Max Temp")
|
||||
#define MSG_INFO_PSU _UxGT("Stromversorgung")
|
||||
|
||||
#define MSG_DRIVE_STRENGTH "Motorströme"
|
||||
#define MSG_DAC_PERCENT "Treiber %"
|
||||
#define MSG_DAC_EEPROM_WRITE "Werte speichern"
|
||||
#define MSG_DRIVE_STRENGTH _UxGT("Motorströme")
|
||||
#define MSG_DAC_PERCENT _UxGT("Treiber %")
|
||||
#define MSG_DAC_EEPROM_WRITE _UxGT("Werte speichern")
|
||||
|
||||
#define MSG_FILAMENT_CHANGE_HEADER "ÄNDERE FILAMENT"
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_HEADER "ÄNDERE OPTIONEN:"
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "Extrude mehr"
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME "Drucke weiter"
|
||||
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("ÄNDERE FILAMENT")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("ÄNDERE OPTIONEN:")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extrude mehr")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Drucke weiter")
|
||||
|
||||
#if LCD_HEIGHT >= 4
|
||||
// Up to 3 lines allowed
|
||||
#define MSG_FILAMENT_CHANGE_INIT_1 "Warte auf den"
|
||||
#define MSG_FILAMENT_CHANGE_INIT_2 "Start des "
|
||||
#define MSG_FILAMENT_CHANGE_INIT_3 "Filamentwechsels"
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Warte auf"
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_2 "Herausnahme"
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_3 "des Filaments"
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_1 "Filament einlegen"
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_2 "und Knopf"
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_3 "drücken..."
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 "Warte auf"
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_2 "Laden des"
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_3 "Filaments"
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Warte auf"
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 "Extrusion des"
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 "Filaments"
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 "Warte auf"
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_2 "Fortsetzung des"
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_3 "Druckes"
|
||||
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Warte auf den")
|
||||
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("Start des ")
|
||||
#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("Filamentwechsels")
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Warte auf")
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("Herausnahme")
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("des Filaments")
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Filament einlegen")
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("und Knopf")
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("drücken...")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Warte auf")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("Laden des")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("Filaments")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Warte auf")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("Extrusion des")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 _UxGT("Filaments")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Warte auf")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("Fortsetzung des")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("Druckes")
|
||||
#else // LCD_HEIGHT < 4
|
||||
// Up to 2 lines allowed
|
||||
#define MSG_FILAMENT_CHANGE_INIT_1 "Bitte warten..."
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Auswerfen..."
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_1 "Laden und Klick"
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 "Laden..."
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Extrudieren..."
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 "Weitermachen..."
|
||||
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Bitte warten...")
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Auswerfen...")
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Laden und Klick")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Laden...")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extrudieren...")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Weitermachen...")
|
||||
#endif // LCD_HEIGHT < 4
|
||||
|
||||
#endif // LANGUAGE_DE_H
|
||||
|
||||
Reference in New Issue
Block a user