bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Format some pins files

Browse Source
This commit is contained in:
Scott Lahteine
2020-03-21 21:13:19 -05:00
committed by Scott Lahteine
parent 9340a33980
commit 2c325c2a7d
174 changed files with 9635 additions and 9668 deletions
Download Patch File Download Diff File Expand all files Collapse all files

56
Marlin/src/pins/esp32/pins_E4D.h
View File

@ -42,49 +42,49 @@
//
// Limit Switches
//
#define X_MIN_PIN 34
#define Y_MIN_PIN 35
#define Z_MIN_PIN 16 // 15
#define X_MIN_PIN 34
#define Y_MIN_PIN 35
#define Z_MIN_PIN 16 // 15
//
// Steppers
//
#define X_STEP_PIN 12 // 34//27
#define X_DIR_PIN 13 // 35//26
#define X_ENABLE_PIN 17 // 0//17//25 // used free pin
//#define X_CS_PIN 0
#define X_STEP_PIN 12 // 34//27
#define X_DIR_PIN 13 // 35//26
#define X_ENABLE_PIN 17 // 0//17//25 // used free pin
//#define X_CS_PIN 0
#define Y_STEP_PIN 32 // 33
#define Y_DIR_PIN 33 // 32
#define Y_ENABLE_PIN X_ENABLE_PIN
//#define Y_CS_PIN 13
#define Y_STEP_PIN 32 // 33
#define Y_DIR_PIN 33 // 32
#define Y_ENABLE_PIN X_ENABLE_PIN
//#define Y_CS_PIN 13
#define Z_STEP_PIN 25 // 14
#define Z_DIR_PIN 26 // 12
#define Z_ENABLE_PIN X_ENABLE_PIN
//#define Z_CS_PIN 5 // SS_PIN
#define Z_STEP_PIN 25 // 14
#define Z_DIR_PIN 26 // 12
#define Z_ENABLE_PIN X_ENABLE_PIN
//#define Z_CS_PIN 5 // SS_PIN
#define E0_STEP_PIN 27 // 16
#define E0_DIR_PIN 14 // 17
#define E0_ENABLE_PIN X_ENABLE_PIN
//#define E0_CS_PIN 21
#define E0_STEP_PIN 27 // 16
#define E0_DIR_PIN 14 // 17
#define E0_ENABLE_PIN X_ENABLE_PIN
//#define E0_CS_PIN 21
//
// Temperature Sensors
//
#define TEMP_0_PIN 36 // Analog Input
#define TEMP_BED_PIN 39 // Analog Input
#define TEMP_0_PIN 36 // Analog Input
#define TEMP_BED_PIN 39 // Analog Input
//
// Heaters / Fans
//
#define HEATER_0_PIN 2 // 4//2//(D8)
#define FAN_PIN 0 // 2//15//13 (D9)
#define HEATER_BED_PIN 15 // 15//0 //(D10)
#define HEATER_0_PIN 2 // 4//2//(D8)
#define FAN_PIN 0 // 2//15//13 (D9)
#define HEATER_BED_PIN 15 // 15//0 //(D10)
// SPI
#define SDSS 5
#define SDSS 5
#define I2S_STEPPER_STREAM
#define I2S_WS 23
#define I2S_BCK 22
#define I2S_DATA 21
#define I2S_WS 23
#define I2S_BCK 22
#define I2S_DATA 21

56
Marlin/src/pins/esp32/pins_ESP32.h
View File

@ -35,52 +35,52 @@
// I2S (steppers & other output-only pins)
//
#define I2S_STEPPER_STREAM
#define I2S_WS 25
#define I2S_BCK 26
#define I2S_DATA 27
#define I2S_WS 25
#define I2S_BCK 26
#define I2S_DATA 27
//
// Limit Switches
//
#define X_MIN_PIN 34
#define Y_MIN_PIN 35
#define Z_MIN_PIN 15
#define X_MIN_PIN 34
#define Y_MIN_PIN 35
#define Z_MIN_PIN 15
//
// Steppers
//
#define X_STEP_PIN 128
#define X_DIR_PIN 129
#define X_ENABLE_PIN 130
//#define X_CS_PIN 0
#define X_STEP_PIN 128
#define X_DIR_PIN 129
#define X_ENABLE_PIN 130
//#define X_CS_PIN 0
#define Y_STEP_PIN 131
#define Y_DIR_PIN 132
#define Y_ENABLE_PIN 133
//#define Y_CS_PIN 13
#define Y_STEP_PIN 131
#define Y_DIR_PIN 132
#define Y_ENABLE_PIN 133
//#define Y_CS_PIN 13
#define Z_STEP_PIN 134
#define Z_DIR_PIN 135
#define Z_ENABLE_PIN 136
//#define Z_CS_PIN 5 // SS_PIN
#define Z_STEP_PIN 134
#define Z_DIR_PIN 135
#define Z_ENABLE_PIN 136
//#define Z_CS_PIN 5 // SS_PIN
#define E0_STEP_PIN 137
#define E0_DIR_PIN 138
#define E0_ENABLE_PIN 139
//#define E0_CS_PIN 21
#define E0_STEP_PIN 137
#define E0_DIR_PIN 138
#define E0_ENABLE_PIN 139
//#define E0_CS_PIN 21
//
// Temperature Sensors
//
#define TEMP_0_PIN 36 // Analog Input
#define TEMP_BED_PIN 39 // Analog Input
#define TEMP_0_PIN 36 // Analog Input
#define TEMP_BED_PIN 39 // Analog Input
//
// Heaters / Fans
//
#define HEATER_0_PIN 2
#define FAN_PIN 13
#define HEATER_BED_PIN 4
#define HEATER_0_PIN 2
#define FAN_PIN 13
#define HEATER_BED_PIN 4
// SPI
#define SDSS 5
#define SDSS 5

68
Marlin/src/pins/esp32/pins_MRR_ESPA.h
View File

@ -45,66 +45,66 @@
#ifdef I2S_STEPPER_STREAM
#undef I2S_STEPPER_STREAM
#endif
#define I2S_WS -1
#define I2S_BCK -1
#define I2S_DATA -1
#define I2S_WS -1
#define I2S_BCK -1
#define I2S_DATA -1
//
// Limit Switches
//
#define X_STOP_PIN 34
#define Y_STOP_PIN 35
#define Z_STOP_PIN 15
#define X_STOP_PIN 34
#define Y_STOP_PIN 35
#define Z_STOP_PIN 15
//
// Steppers
//
#define X_STEP_PIN 27
#define X_DIR_PIN 26
#define X_ENABLE_PIN 25
//#define X_CS_PIN 21
#define X_STEP_PIN 27
#define X_DIR_PIN 26
#define X_ENABLE_PIN 25
//#define X_CS_PIN 21
#define Y_STEP_PIN 33
#define Y_DIR_PIN 32
#define Y_ENABLE_PIN X_ENABLE_PIN
//#define Y_CS_PIN 22
#define Y_STEP_PIN 33
#define Y_DIR_PIN 32
#define Y_ENABLE_PIN X_ENABLE_PIN
//#define Y_CS_PIN 22
#define Z_STEP_PIN 14
#define Z_DIR_PIN 12
#define Z_ENABLE_PIN X_ENABLE_PIN
//#define Z_CS_PIN 5 // SS_PIN
#define Z_STEP_PIN 14
#define Z_DIR_PIN 12
#define Z_ENABLE_PIN X_ENABLE_PIN
//#define Z_CS_PIN 5 // SS_PIN
#define E0_STEP_PIN 16
#define E0_DIR_PIN 17
#define E0_ENABLE_PIN X_ENABLE_PIN
//#define E0_CS_PIN 21
#define E0_STEP_PIN 16
#define E0_DIR_PIN 17
#define E0_ENABLE_PIN X_ENABLE_PIN
//#define E0_CS_PIN 21
//
// Temperature Sensors
//
#define TEMP_0_PIN 36 // Analog Input
#define TEMP_BED_PIN 39 // Analog Input
#define TEMP_0_PIN 36 // Analog Input
#define TEMP_BED_PIN 39 // Analog Input
//
// Heaters / Fans
//
#define HEATER_0_PIN 2
#define FAN_PIN 13
#define HEATER_BED_PIN 4
#define HEATER_0_PIN 2
#define FAN_PIN 13
#define HEATER_BED_PIN 4
//
// MicroSD card
//
#define MOSI_PIN 23
#define MISO_PIN 19
#define SCK_PIN 18
#define SDSS 5
#define USES_SHARED_SPI // SPI is shared by SD card with TMC SPI drivers
#define MOSI_PIN 23
#define MISO_PIN 19
#define SCK_PIN 18
#define SDSS 5
#define USES_SHARED_SPI // SPI is shared by SD card with TMC SPI drivers
// Hardware serial pins
// Add the following to Configuration.h or Configuration_adv.h to assign
// specific pins to hardware Serial1.
// Note: Serial2 can be defined using HARDWARE_SERIAL2_RX and HARDWARE_SERIAL2_TX but
// MRR ESPA does not have enough spare pins for such reassignment.
//#define HARDWARE_SERIAL1_RX 21
//#define HARDWARE_SERIAL1_TX 22
//#define HARDWARE_SERIAL1_RX 21
//#define HARDWARE_SERIAL1_TX 22

122
Marlin/src/pins/esp32/pins_MRR_ESPE.h
View File

@ -43,9 +43,9 @@
//
// Limit Switches
//
#define X_STOP_PIN 35
#define Y_STOP_PIN 32
#define Z_STOP_PIN 33
#define X_STOP_PIN 35
#define Y_STOP_PIN 32
#define Z_STOP_PIN 33
//
// Enable I2S stepper stream
@ -53,72 +53,72 @@
#undef I2S_STEPPER_STREAM
#define I2S_STEPPER_STREAM
#undef LIN_ADVANCE // Currently, I2S stream does not work with linear advance
#undef LIN_ADVANCE // Currently, I2S stream does not work with linear advance
#define I2S_WS 26
#define I2S_BCK 25
#define I2S_DATA 27
#define I2S_WS 26
#define I2S_BCK 25
#define I2S_DATA 27
//
// Steppers
//
#define X_STEP_PIN 129
#define X_DIR_PIN 130
#define X_ENABLE_PIN 128
//#define X_CS_PIN 21
#define X_STEP_PIN 129
#define X_DIR_PIN 130
#define X_ENABLE_PIN 128
//#define X_CS_PIN 21
#define Y_STEP_PIN 132
#define Y_DIR_PIN 133
#define Y_ENABLE_PIN 131
//#define Y_CS_PIN 22
#define Y_STEP_PIN 132
#define Y_DIR_PIN 133
#define Y_ENABLE_PIN 131
//#define Y_CS_PIN 22
#define Z_STEP_PIN 135
#define Z_DIR_PIN 136
#define Z_ENABLE_PIN 134
//#define Z_CS_PIN 5 // SS_PIN
#define Z_STEP_PIN 135
#define Z_DIR_PIN 136
#define Z_ENABLE_PIN 134
//#define Z_CS_PIN 5 // SS_PIN
#define E0_STEP_PIN 138
#define E0_DIR_PIN 139
#define E0_ENABLE_PIN 137
//#define E0_CS_PIN 21
#define E0_STEP_PIN 138
#define E0_DIR_PIN 139
#define E0_ENABLE_PIN 137
//#define E0_CS_PIN 21
#define E1_STEP_PIN 141
#define E1_DIR_PIN 142
#define E1_ENABLE_PIN 140
//#define E1_CS_PIN 22
#define E1_STEP_PIN 141
#define E1_DIR_PIN 142
#define E1_ENABLE_PIN 140
//#define E1_CS_PIN 22
#define Z2_STEP_PIN 141
#define Z2_DIR_PIN 142
#define Z2_ENABLE_PIN 140
//#define Z2_CS_PIN 5
#define Z2_STEP_PIN 141
#define Z2_DIR_PIN 142
#define Z2_ENABLE_PIN 140
//#define Z2_CS_PIN 5
//
// Temperature Sensors
//
#define TEMP_0_PIN 36 // Analog Input
#define TEMP_1_PIN 34 // Analog Input
#define TEMP_BED_PIN 39 // Analog Input
#define TEMP_0_PIN 36 // Analog Input
#define TEMP_1_PIN 34 // Analog Input
#define TEMP_BED_PIN 39 // Analog Input
//
// Heaters / Fans
//
#define HEATER_0_PIN 145 // 2
#define FAN_PIN 146 // 15
#define HEATER_BED_PIN 144 // 4
#define HEATER_0_PIN 145 // 2
#define FAN_PIN 146 // 15
#define HEATER_BED_PIN 144 // 4
#define CONTROLLER_FAN_PIN 147
//#define E0_AUTO_FAN_PIN 148 // need to update Configuration_adv.h @section extruder
//#define E1_AUTO_FAN_PIN 149 // need to update Configuration_adv.h @section extruder
#define FAN1_PIN 149
#define CONTROLLER_FAN_PIN 147
//#define E0_AUTO_FAN_PIN 148 // need to update Configuration_adv.h @section extruder
//#define E1_AUTO_FAN_PIN 149 // need to update Configuration_adv.h @section extruder
#define FAN1_PIN 149
//
// MicroSD card
//
#define MOSI_PIN 23
#define MISO_PIN 19
#define SCK_PIN 18
#define SDSS 5
#define USES_SHARED_SPI // SPI is shared by SD card with TMC SPI drivers
#define MOSI_PIN 23
#define MISO_PIN 19
#define SCK_PIN 18
#define SDSS 5
#define USES_SHARED_SPI // SPI is shared by SD card with TMC SPI drivers
//////////////////////////
// LCDs and Controllers //
@ -126,21 +126,21 @@
#if HAS_GRAPHICAL_LCD
#define LCD_PINS_RS 13
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 16
#define LCD_PINS_RS 13
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 16
#if ENABLED(CR10_STOCKDISPLAY)
#define BEEPER_PIN 151
#define BEEPER_PIN 151
#elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define BEEPER_PIN 151
#define BEEPER_PIN 151
//#define LCD_PINS_D5 150
//#define LCD_PINS_D6 152
//#define LCD_PINS_D7 153
//#define LCD_PINS_D5 150
//#define LCD_PINS_D6 152
//#define LCD_PINS_D7 153
#else
@ -148,9 +148,9 @@
#endif
#define BTN_EN1 0
#define BTN_EN2 12
#define BTN_ENC 14
#define BTN_EN1 0
#define BTN_EN2 12
#define BTN_ENC 14
#endif // HAS_GRAPHICAL_LCD
@ -159,7 +159,7 @@
// specific pins to hardware Serial1 and Serial2.
// Note: Serial2 can be defined using HARDWARE_SERIAL2_RX and HARDWARE_SERIAL2_TX but
// MRR ESPA does not have enough spare pins for such reassignment.
//#define HARDWARE_SERIAL1_RX 21
//#define HARDWARE_SERIAL1_TX 22
//#define HARDWARE_SERIAL2_RX 2
//#define HARDWARE_SERIAL2_TX 4
//#define HARDWARE_SERIAL1_RX 21
//#define HARDWARE_SERIAL1_TX 22
//#define HARDWARE_SERIAL2_RX 2
//#define HARDWARE_SERIAL2_TX 4