bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

🎨 Apply F() to G-code subcommands

Browse Source
This commit is contained in:
Scott Lahteine
2021-09-25 18:43:52 -05:00
committed by Scott Lahteine
parent 433a27e475
commit 2b9ae0cc33
28 changed files with 136 additions and 134 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
Marlin/src/gcode/calibrate/G34.cpp
View File

@ -47,7 +47,7 @@ void GcodeSuite::G34() {
TemporaryGlobalEndstopsState unlock_z(false);
#ifdef GANTRY_CALIBRATION_COMMANDS_PRE
gcode.process_subcommands_now_P(PSTR(GANTRY_CALIBRATION_COMMANDS_PRE));
process_subcommands_now(F(GANTRY_CALIBRATION_COMMANDS_PRE));
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("Sub Commands Processed");
#endif
@ -148,7 +148,7 @@ void GcodeSuite::G34() {
#ifdef GANTRY_CALIBRATION_COMMANDS_POST
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("Running Post Commands");
gcode.process_subcommands_now_P(PSTR(GANTRY_CALIBRATION_COMMANDS_POST));
process_subcommands_now(F(GANTRY_CALIBRATION_COMMANDS_POST));
#endif
SET_SOFT_ENDSTOP_LOOSE(false);

2
Marlin/src/gcode/calibrate/G34_M422.cpp
View File

@ -433,7 +433,7 @@ void GcodeSuite::G34() {
// After this operation the z position needs correction
set_axis_never_homed(Z_AXIS);
// Home Z after the alignment procedure
process_subcommands_now_P(PSTR("G28Z"));
process_subcommands_now(F("G28Z"));
#else
// Use the probed height from the last iteration to determine the Z height.
// z_measured_min is used, because all steppers are aligned to z_measured_min.

4
Marlin/src/gcode/calibrate/G425.cpp
View File

@ -709,7 +709,7 @@ inline void calibrate_all() {
void GcodeSuite::G425() {
#ifdef CALIBRATION_SCRIPT_PRE
GcodeSuite::process_subcommands_now_P(PSTR(CALIBRATION_SCRIPT_PRE));
process_subcommands_now(F(CALIBRATION_SCRIPT_PRE));
#endif
if (homing_needed_error()) return;
@ -745,7 +745,7 @@ void GcodeSuite::G425() {
SET_SOFT_ENDSTOP_LOOSE(false);
#ifdef CALIBRATION_SCRIPT_POST
GcodeSuite::process_subcommands_now_P(PSTR(CALIBRATION_SCRIPT_POST));
process_subcommands_now(F(CALIBRATION_SCRIPT_POST));
#endif
}

2
Marlin/src/gcode/calibrate/G76_M192_M871.cpp
View File

@ -158,7 +158,7 @@ void GcodeSuite::G76() {
return;
}
process_subcommands_now_P(G28_STR);
process_subcommands_now(FPSTR(G28_STR));
}
remember_feedrate_scaling_off();