🐛 Fix Longer3D STM32 boot, add Maple test (#22473)
This commit is contained in:
Tanguy Pruvot
Scott Lahteine
parent
ac64d6915f
commit
2b2a8355c9
3
.github/workflows/test-builds.yml
vendored
3
.github/workflows/test-builds.yml
vendored
@ -61,7 +61,7 @@ jobs:
|
|||||||
- STM32F103RC_fysetc
|
- STM32F103RC_fysetc
|
||||||
- STM32F103RC_meeb
|
- STM32F103RC_meeb
|
||||||
- jgaurora_a5s_a1
|
- jgaurora_a5s_a1
|
||||||
- STM32F103VE_longer
|
- STM32F103VE_longer_maple
|
||||||
#- mks_robin_maple
|
#- mks_robin_maple
|
||||||
- mks_robin_lite
|
- mks_robin_lite
|
||||||
- mks_robin_pro
|
- mks_robin_pro
|
||||||
@ -75,6 +75,7 @@ jobs:
|
|||||||
- STM32F103RE_btt
|
- STM32F103RE_btt
|
||||||
- STM32F103RE_btt_USB
|
- STM32F103RE_btt_USB
|
||||||
- STM32F103RET6_creality
|
- STM32F103RET6_creality
|
||||||
|
- STM32F103VE_longer
|
||||||
- STM32F407VE_black
|
- STM32F407VE_black
|
||||||
- STM32F401VE_STEVAL
|
- STM32F401VE_STEVAL
|
||||||
- BIGTREE_BTT002
|
- BIGTREE_BTT002
|
||||||
|
|||||||
@ -99,12 +99,19 @@
|
|||||||
// Avoid nozzle heat and fan start before serial init
|
// Avoid nozzle heat and fan start before serial init
|
||||||
#define BOARD_OPENDRAIN_MOSFETS
|
#define BOARD_OPENDRAIN_MOSFETS
|
||||||
|
|
||||||
#define BOARD_PREINIT() { \
|
#define BOARD_INIT_OD_PINS() { \
|
||||||
OUT_WRITE_OD(HEATER_0_PIN, 0); \
|
OUT_WRITE_OD(HEATER_0_PIN, 0); \
|
||||||
OUT_WRITE_OD(HEATER_BED_PIN, 0); \
|
OUT_WRITE_OD(HEATER_BED_PIN, 0); \
|
||||||
OUT_WRITE_OD(FAN_PIN, 0); \
|
OUT_WRITE_OD(FAN_PIN, 0); \
|
||||||
}
|
}
|
||||||
|
|
||||||
|
#ifdef MAPLE_STM32F1
|
||||||
|
// Only Maple Framework allow that early
|
||||||
|
#define BOARD_PREINIT BOARD_INIT_OD_PINS
|
||||||
|
#else
|
||||||
|
#define BOARD_INIT BOARD_INIT_OD_PINS
|
||||||
|
#endif
|
||||||
|
|
||||||
//
|
//
|
||||||
// PWM for a servo probe
|
// PWM for a servo probe
|
||||||
// Other servo devices are not supported on this board!
|
// Other servo devices are not supported on this board!
|
||||||
|
|||||||
@ -0,0 +1,289 @@
|
|||||||
|
/*
|
||||||
|
*******************************************************************************
|
||||||
|
* Copyright (c) 2020, STMicroelectronics
|
||||||
|
* All rights reserved.
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under BSD 3-Clause license,
|
||||||
|
* the "License"; You may not use this file except in compliance with the
|
||||||
|
* License. You may obtain a copy of the License at:
|
||||||
|
* opensource.org/licenses/BSD-3-Clause
|
||||||
|
*
|
||||||
|
*******************************************************************************
|
||||||
|
* Automatically generated from STM32F103V(F-G)Tx.xml
|
||||||
|
*/
|
||||||
|
#include "Arduino.h"
|
||||||
|
#include "PeripheralPins.h"
|
||||||
|
|
||||||
|
/* =====
|
||||||
|
* Note: Commented lines are alternative possibilities which are not used per default.
|
||||||
|
* If you change them, you will have to know what you do
|
||||||
|
* =====
|
||||||
|
*/
|
||||||
|
|
||||||
|
//*** ADC ***
|
||||||
|
|
||||||
|
#ifdef HAL_ADC_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_ADC[] = {
|
||||||
|
{PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
|
||||||
|
//{PA_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC2_IN0
|
||||||
|
//{PA_0, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC3_IN0
|
||||||
|
{PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
|
||||||
|
//{PA_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC2_IN1
|
||||||
|
//{PA_1, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC3_IN1
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//*** DAC ***
|
||||||
|
|
||||||
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||||||
|
#ifdef HAL_DAC_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_DAC[] = {
|
||||||
|
//{PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1
|
||||||
|
//{PA_5, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC_OUT2
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//*** I2C ***
|
||||||
|
|
||||||
|
#ifdef HAL_I2C_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_I2C_SDA[] = {
|
||||||
|
{PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, AFIO_NONE)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
|
||||||
|
WEAK const PinMap PinMap_I2C_SCL[] = {
|
||||||
|
{PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, AFIO_NONE)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//*** PWM ***
|
||||||
|
|
||||||
|
#ifdef HAL_TIM_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_PWM[] = {
|
||||||
|
#if 0
|
||||||
|
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM2_CH1
|
||||||
|
//{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_2, 1, 0)}, // TIM2_CH1
|
||||||
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||||||
|
//{PA_0, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM5_CH1
|
||||||
|
#endif
|
||||||
|
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM2_CH2
|
||||||
|
//{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_2, 2, 0)}, // TIM2_CH2
|
||||||
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||||||
|
//{PA_1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM5_CH2
|
||||||
|
#endif
|
||||||
|
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 0)}, // TIM2_CH3
|
||||||
|
//{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_1, 3, 0)}, // TIM2_CH3
|
||||||
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||||||
|
//{PA_2, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 0)}, // TIM5_CH3
|
||||||
|
#endif
|
||||||
|
#ifdef STM32F103xG
|
||||||
|
//{PA_2, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM9_CH1
|
||||||
|
#endif
|
||||||
|
//{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_1, 4, 0)}, // TIM2_CH4
|
||||||
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||||||
|
//{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 4, 0)}, // TIM2_CH4
|
||||||
|
{PA_3, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 4, 0)}, // TIM5_CH4
|
||||||
|
#else
|
||||||
|
{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 4, 0)}, // TIM2_CH4
|
||||||
|
#endif
|
||||||
|
#if defined(STM32F103xG)
|
||||||
|
//{PA_3, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM9_CH2
|
||||||
|
#endif
|
||||||
|
{PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM3_CH1
|
||||||
|
#if defined(STM32F103xG)
|
||||||
|
//{PA_6, TIM13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM13_CH1
|
||||||
|
#endif
|
||||||
|
{PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 1, 1)}, // TIM1_CH1N
|
||||||
|
//{PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM3_CH2
|
||||||
|
//{PA_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 1)}, // TIM8_CH1N
|
||||||
|
#if defined(STM32F103xG)
|
||||||
|
//{PA_7, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM14_CH1
|
||||||
|
#endif
|
||||||
|
{PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM1_CH1
|
||||||
|
//{PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 1, 0)}, // TIM1_CH1
|
||||||
|
{PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM1_CH2
|
||||||
|
//{PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 2, 0)}, // TIM1_CH2
|
||||||
|
{PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 0)}, // TIM1_CH3
|
||||||
|
//{PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 3, 0)}, // TIM1_CH3
|
||||||
|
{PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 4, 0)}, // TIM1_CH4
|
||||||
|
//{PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 4, 0)}, // TIM1_CH4
|
||||||
|
{PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_1, 1, 0)}, // TIM2_CH1
|
||||||
|
//{PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_ENABLE, 1, 0)}, // TIM2_CH1
|
||||||
|
//{PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 2, 1)}, // TIM1_CH2N
|
||||||
|
{PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 0)}, // TIM3_CH3
|
||||||
|
//{PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_PARTIAL, 3, 0)}, // TIM3_CH3
|
||||||
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||||||
|
//{PB_0, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 1)}, // TIM8_CH2N
|
||||||
|
#endif
|
||||||
|
{PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 3, 1)}, // TIM1_CH3N
|
||||||
|
//{PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 4, 0)}, // TIM3_CH4
|
||||||
|
//{PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_PARTIAL, 4, 0)}, // TIM3_CH4
|
||||||
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||||||
|
//{PB_1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 1)}, // TIM8_CH3N
|
||||||
|
#endif
|
||||||
|
{PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_1, 2, 0)}, // TIM2_CH2
|
||||||
|
//{PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_ENABLE, 2, 0)}, // TIM2_CH2
|
||||||
|
{PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_PARTIAL, 1, 0)}, // TIM3_CH1
|
||||||
|
{PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_PARTIAL, 2, 0)}, // TIM3_CH2
|
||||||
|
{PB_6, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM4_CH1
|
||||||
|
{PB_7, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM4_CH2
|
||||||
|
{PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 0)}, // TIM4_CH3
|
||||||
|
#if defined(STM32F103xG)
|
||||||
|
//{PB_8, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM10_CH1
|
||||||
|
#endif
|
||||||
|
{PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 4, 0)}, // TIM4_CH4
|
||||||
|
#if defined(STM32F103xG)
|
||||||
|
//{PB_9, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM11_CH1
|
||||||
|
#endif
|
||||||
|
{PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_2, 3, 0)}, // TIM2_CH3
|
||||||
|
//{PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_ENABLE, 3, 0)}, // TIM2_CH3
|
||||||
|
{PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_2, 4, 0)}, // TIM2_CH4
|
||||||
|
//{PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_ENABLE, 4, 0)}, // TIM2_CH4
|
||||||
|
{PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 1)}, // TIM1_CH1N
|
||||||
|
{PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 1)}, // TIM1_CH2N
|
||||||
|
#if defined(STM32F103xG)
|
||||||
|
//{PB_14, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM12_CH1
|
||||||
|
#endif
|
||||||
|
{PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 1)}, // TIM1_CH3N
|
||||||
|
#if defined(STM32F103xG)
|
||||||
|
//{PB_15, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM12_CH2
|
||||||
|
#endif
|
||||||
|
{PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_ENABLE, 1, 0)}, // TIM3_CH1
|
||||||
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||||||
|
//{PC_6, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM8_CH1
|
||||||
|
#endif
|
||||||
|
{PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_ENABLE, 2, 0)}, // TIM3_CH2
|
||||||
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||||||
|
//{PC_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM8_CH2
|
||||||
|
#endif
|
||||||
|
{PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_ENABLE, 3, 0)}, // TIM3_CH3
|
||||||
|
//{PC_8, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 0)}, // TIM8_CH3
|
||||||
|
{PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_ENABLE, 4, 0)}, // TIM3_CH4
|
||||||
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||||||
|
//{PC_9, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 4, 0)}, // TIM8_CH4
|
||||||
|
#endif
|
||||||
|
{PD_12, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM4_ENABLE, 1, 0)}, // TIM4_CH1
|
||||||
|
{PD_13, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM4_ENABLE, 2, 0)}, // TIM4_CH2
|
||||||
|
{PD_14, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM4_ENABLE, 3, 0)}, // TIM4_CH3
|
||||||
|
{PD_15, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM4_ENABLE, 4, 0)}, // TIM4_CH4
|
||||||
|
#if defined(STM32F103xG)
|
||||||
|
{PE_5, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM9_ENABLE, 1, 0)}, // TIM9_CH1
|
||||||
|
{PE_6, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM9_ENABLE, 2, 0)}, // TIM9_CH2
|
||||||
|
#endif
|
||||||
|
{PE_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_ENABLE, 1, 1)}, // TIM1_CH1N
|
||||||
|
{PE_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_ENABLE, 1, 0)}, // TIM1_CH1
|
||||||
|
{PE_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_ENABLE, 2, 1)}, // TIM1_CH2N
|
||||||
|
{PE_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_ENABLE, 2, 0)}, // TIM1_CH2
|
||||||
|
{PE_12, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_ENABLE, 3, 1)}, // TIM1_CH3N
|
||||||
|
{PE_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_ENABLE, 3, 0)}, // TIM1_CH3
|
||||||
|
{PE_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_ENABLE, 4, 0)}, // TIM1_CH4
|
||||||
|
#endif // if 0
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//*** SERIAL ***
|
||||||
|
|
||||||
|
#ifdef HAL_UART_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_UART_TX[] = {
|
||||||
|
{PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
|
||||||
|
{PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
|
||||||
|
//{PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
|
||||||
|
WEAK const PinMap PinMap_UART_RX[] = {
|
||||||
|
{PA_3, USART2, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, AFIO_NONE)},
|
||||||
|
{PA_10, USART1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, AFIO_NONE)},
|
||||||
|
//{PB_11, USART3, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, AFIO_NONE)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
|
||||||
|
WEAK const PinMap PinMap_UART_RTS[] = {
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
|
||||||
|
WEAK const PinMap PinMap_UART_CTS[] = {
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//*** SPI ***
|
||||||
|
|
||||||
|
WEAK const PinMap PinMap_SPI_MOSI[] = {
|
||||||
|
{PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
|
||||||
|
//{PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
|
||||||
|
WEAK const PinMap PinMap_SPI_MISO[] = {
|
||||||
|
{PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
|
||||||
|
//{PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
|
||||||
|
WEAK const PinMap PinMap_SPI_SCLK[] = {
|
||||||
|
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
|
||||||
|
//{PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
|
||||||
|
WEAK const PinMap PinMap_SPI_SSEL[] = {
|
||||||
|
//{PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
|
||||||
|
//{PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
|
||||||
|
//*** No CAN ***
|
||||||
|
|
||||||
|
#ifdef HAL_CAN_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_CAN_RD[] = {
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
|
||||||
|
WEAK const PinMap PinMap_CAN_TD[] = {
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//*** No ETHERNET ***
|
||||||
|
|
||||||
|
//*** No QUADSPI ***
|
||||||
|
|
||||||
|
//*** USB ***
|
||||||
|
|
||||||
|
#ifdef HAL_PCD_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_USB[] = {
|
||||||
|
{PA_11, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, AFIO_NONE)}, // USB_DM
|
||||||
|
{PA_12, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, AFIO_NONE)}, // USB_DP
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//*** No USB_OTG_FS ***
|
||||||
|
|
||||||
|
//*** No USB_OTG_HS ***
|
||||||
|
|
||||||
|
//*** SD ***
|
||||||
|
|
||||||
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||||||
|
#ifdef HAL_SD_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_SD[] = {
|
||||||
|
//{PB_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, // SDIO_D4
|
||||||
|
//{PB_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, // SDIO_D5
|
||||||
|
//{PC_6, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, // SDIO_D6
|
||||||
|
//{PC_7, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, // SDIO_D7
|
||||||
|
{PC_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, // SDIO_D0
|
||||||
|
{PC_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, // SDIO_D1
|
||||||
|
{PC_10, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, // SDIO_D2
|
||||||
|
{PC_11, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, // SDIO_D3
|
||||||
|
{PC_12, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, AFIO_NONE)}, // SDIO_CK
|
||||||
|
{PD_2, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, AFIO_NONE)}, // SDIO_CMD
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
@ -0,0 +1,32 @@
|
|||||||
|
/* SYS_WKUP */
|
||||||
|
#if defined(PWR_WAKEUP_PIN1) && defined(HAL_PWR_MODULE_ENABLED) && !defined(HAL_PWR_MODULE_ONLY)
|
||||||
|
#error PA0 is used by thermal sensor, disable low power wake with -DHAL_PWR_MODULE_ONLY
|
||||||
|
SYS_WKUP1 = PA_0,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN2
|
||||||
|
SYS_WKUP2 = NC,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN3
|
||||||
|
SYS_WKUP3 = NC,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN4
|
||||||
|
SYS_WKUP4 = NC,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN5
|
||||||
|
SYS_WKUP5 = NC,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN6
|
||||||
|
SYS_WKUP6 = NC,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN7
|
||||||
|
SYS_WKUP7 = NC,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN8
|
||||||
|
SYS_WKUP8 = NC,
|
||||||
|
#endif
|
||||||
|
/* USB */
|
||||||
|
#ifdef USBCON
|
||||||
|
#warning USB feature is not required with a CH340 chip
|
||||||
|
USB_DM = PA_11,
|
||||||
|
USB_DP = PA_12,
|
||||||
|
#endif
|
||||||
@ -0,0 +1,348 @@
|
|||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* @file hal_conf_custom.h for Longer3D STM32F103VE board
|
||||||
|
* @brief Overrides HAL default configuration file.
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Exported types ------------------------------------------------------------*/
|
||||||
|
/* Exported constants --------------------------------------------------------*/
|
||||||
|
|
||||||
|
/* ########################## Module Selection ############################## */
|
||||||
|
/**
|
||||||
|
* @brief Include the default list of modules to be used in the HAL driver
|
||||||
|
* and manage module deactivation
|
||||||
|
*/
|
||||||
|
#include "stm32yyxx_hal_conf.h"
|
||||||
|
|
||||||
|
#ifdef HAL_PWR_MODULE_ENABLED
|
||||||
|
#undef HAL_PWR_MODULE_ENABLED // only way to disable it
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if defined(HAL_PWR_MODULE_ENABLED) && !defined(HAL_PWR_MODULE_ONLY)
|
||||||
|
#define HAL_PWR_MODULE_ONLY // disable low power & PA0 wakeup pin (its T°c pin)
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef HAL_IWDG_MODULE_ENABLED
|
||||||
|
#define HAL_IWDG_MODULE_ENABLED // USE_WATCHDOG
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_PCD_MODULE_ENABLED
|
||||||
|
#warning No direct STM32 USB pins on Longer3D board
|
||||||
|
#undef HAL_PCD_MODULE_ENABLED // USB Device
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_HCD_MODULE_ENABLED
|
||||||
|
#warning No direct STM32 USB pins on Longer3D board
|
||||||
|
#undef HAL_HCD_MODULE_ENABLED // USB Host
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef HAL_USART_MODULE_ENABLED
|
||||||
|
//#define HAL_USART_MODULE_ENABLED // Useless.... UART_MODULE do it
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
|
||||||
|
#undef HAL_CAN_LEGACY_MODULE_ENABLED
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_CAN_MODULE_ENABLED
|
||||||
|
#undef HAL_CAN_MODULE_ENABLED
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_DAC_MODULE_ENABLED
|
||||||
|
#undef HAL_DAC_MODULE_ENABLED
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_RTC_MODULE_ENABLED
|
||||||
|
#undef HAL_RTC_MODULE_ENABLED
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef HAL_EXTI_MODULE_ENABLED
|
||||||
|
#define HAL_EXTI_MODULE_ENABLED // for ENDSTOP_INTERRUPTS_FEATURE
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief List of modules in the framework (first ones enabled by default)
|
||||||
|
*/
|
||||||
|
//#define HAL_MODULE_ENABLED
|
||||||
|
//#define HAL_ADC_MODULE_ENABLED
|
||||||
|
//#define HAL_CORTEX_MODULE_ENABLED
|
||||||
|
//#define HAL_DAC_MODULE_ENABLED
|
||||||
|
//#define HAL_DMA_MODULE_ENABLED
|
||||||
|
//#define HAL_FLASH_MODULE_ENABLED
|
||||||
|
//#define HAL_GPIO_MODULE_ENABLED
|
||||||
|
//#define HAL_I2C_MODULE_ENABLED
|
||||||
|
//#define HAL_PCD_MODULE_ENABLED
|
||||||
|
//#define HAL_PWR_MODULE_ENABLED
|
||||||
|
//#define HAL_RCC_MODULE_ENABLED
|
||||||
|
//#define HAL_RTC_MODULE_ENABLED
|
||||||
|
//#define HAL_SD_MODULE_ENABLED
|
||||||
|
//#define HAL_SPI_MODULE_ENABLED
|
||||||
|
//#define HAL_SRAM_MODULE_ENABLED
|
||||||
|
//#define HAL_TIM_MODULE_ENABLED
|
||||||
|
//#define HAL_UART_MODULE_ENABLED
|
||||||
|
|
||||||
|
//#define HAL_CAN_MODULE_ENABLED
|
||||||
|
//#define HAL_CAN_LEGACY_MODULE_ENABLED
|
||||||
|
//#define HAL_CEC_MODULE_ENABLED
|
||||||
|
//#define HAL_CRC_MODULE_ENABLED
|
||||||
|
//#define HAL_ETH_MODULE_ENABLED
|
||||||
|
//#define HAL_EXTI_MODULE_ENABLED
|
||||||
|
//#define HAL_HCD_MODULE_ENABLED
|
||||||
|
//#define HAL_I2S_MODULE_ENABLED
|
||||||
|
//#define HAL_IRDA_MODULE_ENABLED
|
||||||
|
//#define HAL_IWDG_MODULE_ENABLED
|
||||||
|
//#define HAL_NAND_MODULE_ENABLED
|
||||||
|
//#define HAL_NOR_MODULE_ENABLED
|
||||||
|
//#define HAL_PCCARD_MODULE_ENABLED
|
||||||
|
//#define HAL_SMARTCARD_MODULE_ENABLED
|
||||||
|
//#define HAL_USART_MODULE_ENABLED
|
||||||
|
//#define HAL_WWDG_MODULE_ENABLED
|
||||||
|
//#define HAL_MMC_MODULE_ENABLED
|
||||||
|
|
||||||
|
/* ########################## Oscillator Values adaptation ####################*/
|
||||||
|
/**
|
||||||
|
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
|
||||||
|
* This value is used by the RCC HAL module to compute the system frequency
|
||||||
|
* (when HSE is used as system clock source, directly or through the PLL).
|
||||||
|
*/
|
||||||
|
#ifndef HSE_VALUE
|
||||||
|
#define HSE_VALUE 8000000U // Value of the External oscillator in Hz (8 MHz)
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef HSE_STARTUP_TIMEOUT
|
||||||
|
#define HSE_STARTUP_TIMEOUT 100U // Time out for HSE start up, in ms
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Internal High Speed oscillator (HSI) value.
|
||||||
|
* This value is used by the RCC HAL module to compute the system frequency
|
||||||
|
* (when HSI is used as system clock source, directly or through the PLL).
|
||||||
|
*/
|
||||||
|
#ifndef HSI_VALUE
|
||||||
|
#define HSI_VALUE 8000000U // Value of the Internal oscillator in Hz
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Internal Low Speed oscillator (LSI) value.
|
||||||
|
*/
|
||||||
|
#ifndef LSI_VALUE
|
||||||
|
#define LSI_VALUE 40000U // LSI Typical Value in Hz
|
||||||
|
#endif /*!< Value of the Internal Low Speed oscillator in Hz
|
||||||
|
The real value may vary depending on the variations
|
||||||
|
in voltage and temperature. */
|
||||||
|
/**
|
||||||
|
* @brief External Low Speed oscillator (LSE) value.
|
||||||
|
* This value is used by the UART, RTC HAL module to compute the system frequency
|
||||||
|
*/
|
||||||
|
#ifndef LSE_VALUE
|
||||||
|
#define LSE_VALUE 32768U // Value of the External Low Speed oscillator in Hz
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef LSE_STARTUP_TIMEOUT
|
||||||
|
#define LSE_STARTUP_TIMEOUT 50U // No 32.7KHz LSE on this board, reduced to avoid delays
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
||||||
|
=== you can define the HSE value in your toolchain compiler preprocessor. */
|
||||||
|
|
||||||
|
/* ########################### System Configuration ######################### */
|
||||||
|
/**
|
||||||
|
* @brief This is the HAL system configuration section
|
||||||
|
*/
|
||||||
|
#ifndef VDD_VALUE
|
||||||
|
#define VDD_VALUE 3300U // Value of VDD in mv
|
||||||
|
#endif
|
||||||
|
#ifndef TICK_INT_PRIORITY
|
||||||
|
#define TICK_INT_PRIORITY 0x00U // tick interrupt priority
|
||||||
|
#endif
|
||||||
|
#ifndef USE_RTOS
|
||||||
|
#define USE_RTOS 0U
|
||||||
|
#endif
|
||||||
|
#ifndef PREFETCH_ENABLE
|
||||||
|
#define PREFETCH_ENABLE 1U
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */
|
||||||
|
#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */
|
||||||
|
#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */
|
||||||
|
#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */
|
||||||
|
#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */
|
||||||
|
#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */
|
||||||
|
#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */
|
||||||
|
#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */
|
||||||
|
#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */
|
||||||
|
#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */
|
||||||
|
#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */
|
||||||
|
#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */
|
||||||
|
#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */
|
||||||
|
#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */
|
||||||
|
#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */
|
||||||
|
#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */
|
||||||
|
#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */
|
||||||
|
#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */
|
||||||
|
#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */
|
||||||
|
#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */
|
||||||
|
#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */
|
||||||
|
#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */
|
||||||
|
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */
|
||||||
|
|
||||||
|
/* ################## SPI peripheral configuration ########################## */
|
||||||
|
|
||||||
|
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
|
||||||
|
* Activated: CRC code is present inside driver
|
||||||
|
* Deactivated: CRC code cleaned from driver
|
||||||
|
*/
|
||||||
|
#if !defined(USE_SPI_CRC)
|
||||||
|
#define USE_SPI_CRC 0
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
/**
|
||||||
|
* @brief Include module's header file
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifdef HAL_RCC_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_rcc.h"
|
||||||
|
#endif /* HAL_RCC_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_GPIO_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_gpio.h"
|
||||||
|
#endif /* HAL_GPIO_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_EXTI_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_exti.h"
|
||||||
|
#endif /* HAL_EXTI_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_DMA_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_dma.h"
|
||||||
|
#endif /* HAL_DMA_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_ETH_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_eth.h"
|
||||||
|
#endif /* HAL_ETH_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_CAN_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_can.h"
|
||||||
|
#endif /* HAL_CAN_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
|
||||||
|
#include "Legacy/stm32f1xx_hal_can_legacy.h"
|
||||||
|
#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_CEC_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_cec.h"
|
||||||
|
#endif /* HAL_CEC_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_CORTEX_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_cortex.h"
|
||||||
|
#endif /* HAL_CORTEX_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_ADC_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_adc.h"
|
||||||
|
#endif /* HAL_ADC_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_CRC_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_crc.h"
|
||||||
|
#endif /* HAL_CRC_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_DAC_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_dac.h"
|
||||||
|
#endif /* HAL_DAC_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_FLASH_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_flash.h"
|
||||||
|
#endif /* HAL_FLASH_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_SRAM_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_sram.h"
|
||||||
|
#endif /* HAL_SRAM_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_NOR_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_nor.h"
|
||||||
|
#endif /* HAL_NOR_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_I2C_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_i2c.h"
|
||||||
|
#endif /* HAL_I2C_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_I2S_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_i2s.h"
|
||||||
|
#endif /* HAL_I2S_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_IWDG_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_iwdg.h"
|
||||||
|
#endif /* HAL_IWDG_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_PWR_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_pwr.h"
|
||||||
|
#endif /* HAL_PWR_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_RTC_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_rtc.h"
|
||||||
|
#endif /* HAL_RTC_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_PCCARD_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_pccard.h"
|
||||||
|
#endif /* HAL_PCCARD_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_SD_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_sd.h"
|
||||||
|
#endif /* HAL_SD_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_NAND_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_nand.h"
|
||||||
|
#endif /* HAL_NAND_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_SPI_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_spi.h"
|
||||||
|
#endif /* HAL_SPI_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_TIM_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_tim.h"
|
||||||
|
#endif /* HAL_TIM_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_UART_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_uart.h"
|
||||||
|
#endif /* HAL_UART_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_USART_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_usart.h"
|
||||||
|
#endif /* HAL_USART_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_IRDA_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_irda.h"
|
||||||
|
#endif /* HAL_IRDA_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_SMARTCARD_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_smartcard.h"
|
||||||
|
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_WWDG_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_wwdg.h"
|
||||||
|
#endif /* HAL_WWDG_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_PCD_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_pcd.h"
|
||||||
|
#endif /* HAL_PCD_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_HCD_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_hcd.h"
|
||||||
|
#endif /* HAL_HCD_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_MMC_MODULE_ENABLED
|
||||||
|
#include "stm32f1xx_hal_mmc.h"
|
||||||
|
#endif /* HAL_MMC_MODULE_ENABLED */
|
||||||
|
|
||||||
|
|
||||||
|
#define assert_param(expr) ((void)0U)
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
@ -0,0 +1,189 @@
|
|||||||
|
/*
|
||||||
|
******************************************************************************
|
||||||
|
**
|
||||||
|
** File : LinkerScript.ld
|
||||||
|
**
|
||||||
|
** Author : Auto-generated by STM32CubeIDE
|
||||||
|
**
|
||||||
|
** Abstract : Linker script for STM32F103V(8/B/C/E/F/GTx Device from STM32F1 series
|
||||||
|
** 64/128/256/512/768/1024Kbytes FLASH
|
||||||
|
** 20/20/48/64/64/96/96Kbytes RAM
|
||||||
|
**
|
||||||
|
** Set heap size, stack size and stack location according
|
||||||
|
** to application requirements.
|
||||||
|
**
|
||||||
|
** Set memory bank area and size if external memory is used.
|
||||||
|
**
|
||||||
|
** Target : STMicroelectronics STM32
|
||||||
|
**
|
||||||
|
** Distribution: The file is distributed as is without any warranty
|
||||||
|
** of any kind.
|
||||||
|
**
|
||||||
|
*****************************************************************************
|
||||||
|
** @attention
|
||||||
|
**
|
||||||
|
** <h2><center>© COPYRIGHT(c) 2019 STMicroelectronics</center></h2>
|
||||||
|
**
|
||||||
|
** Redistribution and use in source and binary forms, with or without modification,
|
||||||
|
** are permitted provided that the following conditions are met:
|
||||||
|
** 1. Redistributions of source code must retain the above copyright notice,
|
||||||
|
** this list of conditions and the following disclaimer.
|
||||||
|
** 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||||
|
** this list of conditions and the following disclaimer in the documentation
|
||||||
|
** and/or other materials provided with the distribution.
|
||||||
|
** 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||||
|
** may be used to endorse or promote products derived from this software
|
||||||
|
** without specific prior written permission.
|
||||||
|
**
|
||||||
|
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||||
|
** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||||
|
** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||||
|
** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||||
|
** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||||
|
** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||||
|
** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||||
|
** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||||
|
** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||||
|
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
**
|
||||||
|
*****************************************************************************
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Entry Point */
|
||||||
|
ENTRY(Reset_Handler)
|
||||||
|
|
||||||
|
/* Highest address of the user mode stack */
|
||||||
|
_estack = 0x20000000 + LD_MAX_DATA_SIZE; /* end of "RAM" Ram type memory */
|
||||||
|
_Min_Heap_Size = 0x200; /* required amount of heap */
|
||||||
|
_Min_Stack_Size = 0x400; /* required amount of stack */
|
||||||
|
|
||||||
|
/* Memories definition */
|
||||||
|
MEMORY
|
||||||
|
{
|
||||||
|
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = LD_MAX_DATA_SIZE
|
||||||
|
FLASH (rx) : ORIGIN = 0x8000000 + LD_FLASH_OFFSET, LENGTH = LD_MAX_SIZE - LD_FLASH_OFFSET
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Sections */
|
||||||
|
SECTIONS
|
||||||
|
{
|
||||||
|
/* The startup code into "FLASH" Rom type memory */
|
||||||
|
.isr_vector :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
KEEP(*(.isr_vector)) /* Startup code */
|
||||||
|
. = ALIGN(4);
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
/* The program code and other data into "FLASH" Rom type memory */
|
||||||
|
.text :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
*(.text) /* .text sections (code) */
|
||||||
|
*(.text*) /* .text* sections (code) */
|
||||||
|
*(.glue_7) /* glue arm to thumb code */
|
||||||
|
*(.glue_7t) /* glue thumb to arm code */
|
||||||
|
*(.eh_frame)
|
||||||
|
|
||||||
|
KEEP (*(.init))
|
||||||
|
KEEP (*(.fini))
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
_etext = .; /* define a global symbols at end of code */
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
/* Constant data into "FLASH" Rom type memory */
|
||||||
|
.rodata : {
|
||||||
|
. = ALIGN(4);
|
||||||
|
*(.rodata) /* .rodata sections (constants, strings, etc.) */
|
||||||
|
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
||||||
|
. = ALIGN(4);
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
.ARM.extab : {
|
||||||
|
. = ALIGN(4);
|
||||||
|
*(.ARM.extab* .gnu.linkonce.armextab.*)
|
||||||
|
. = ALIGN(4);
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
.ARM : {
|
||||||
|
. = ALIGN(4);
|
||||||
|
__exidx_start = .;
|
||||||
|
*(.ARM.exidx*)
|
||||||
|
__exidx_end = .;
|
||||||
|
. = ALIGN(4);
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
.preinit_array : {
|
||||||
|
. = ALIGN(4);
|
||||||
|
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||||
|
KEEP (*(.preinit_array*))
|
||||||
|
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||||
|
. = ALIGN(4);
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
.init_array : {
|
||||||
|
. = ALIGN(4);
|
||||||
|
PROVIDE_HIDDEN (__init_array_start = .);
|
||||||
|
KEEP (*(SORT(.init_array.*)))
|
||||||
|
KEEP (*(.init_array*))
|
||||||
|
PROVIDE_HIDDEN (__init_array_end = .);
|
||||||
|
. = ALIGN(4);
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
.fini_array : {
|
||||||
|
. = ALIGN(4);
|
||||||
|
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||||
|
KEEP (*(SORT(.fini_array.*)))
|
||||||
|
KEEP (*(.fini_array*))
|
||||||
|
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||||
|
. = ALIGN(4);
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
/* Used by the startup to initialize data */
|
||||||
|
_sidata = LOADADDR(.data);
|
||||||
|
|
||||||
|
/* Initialized data sections into "RAM" Ram type memory */
|
||||||
|
.data : {
|
||||||
|
. = ALIGN(4);
|
||||||
|
_sdata = .; /* create a global symbol at data start */
|
||||||
|
*(.data) /* .data sections */
|
||||||
|
*(.data*) /* .data* sections */
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
_edata = .; /* define a global symbol at data end */
|
||||||
|
} >RAM AT> FLASH
|
||||||
|
|
||||||
|
/* Uninitialized data section into "RAM" Ram type memory */
|
||||||
|
. = ALIGN(4);
|
||||||
|
.bss : {
|
||||||
|
/* This is used by the startup in order to initialize the .bss secion */
|
||||||
|
_sbss = .; /* define a global symbol at bss start */
|
||||||
|
__bss_start__ = _sbss;
|
||||||
|
*(.bss)
|
||||||
|
*(.bss*)
|
||||||
|
*(COMMON)
|
||||||
|
. = ALIGN(4);
|
||||||
|
_ebss = .; /* define a global symbol at bss end */
|
||||||
|
__bss_end__ = _ebss;
|
||||||
|
} >RAM
|
||||||
|
|
||||||
|
/* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */
|
||||||
|
._user_heap_stack : {
|
||||||
|
. = ALIGN(8);
|
||||||
|
PROVIDE ( end = . );
|
||||||
|
PROVIDE ( _end = . );
|
||||||
|
. = . + _Min_Heap_Size;
|
||||||
|
. = . + _Min_Stack_Size;
|
||||||
|
. = ALIGN(8);
|
||||||
|
} >RAM
|
||||||
|
|
||||||
|
/* Remove information from the compiler libraries */
|
||||||
|
/DISCARD/ : {
|
||||||
|
libc.a ( * )
|
||||||
|
libm.a ( * )
|
||||||
|
libgcc.a ( * )
|
||||||
|
}
|
||||||
|
|
||||||
|
.ARM.attributes 0 : { *(.ARM.attributes) }
|
||||||
|
}
|
||||||
@ -0,0 +1,249 @@
|
|||||||
|
/*
|
||||||
|
*******************************************************************************
|
||||||
|
* Copyright (c) 2019, STMicroelectronics
|
||||||
|
* All rights reserved.
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under BSD 3-Clause license,
|
||||||
|
* the "License"; You may not use this file except in compliance with the
|
||||||
|
* License. You may obtain a copy of the License at:
|
||||||
|
* opensource.org/licenses/BSD-3-Clause
|
||||||
|
*
|
||||||
|
*******************************************************************************
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "pins_arduino.h"
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// Digital PinName array
|
||||||
|
const PinName digitalPin[] = {
|
||||||
|
PA_0, //D0
|
||||||
|
PA_1, //D1
|
||||||
|
PA_2, //D2
|
||||||
|
PA_3, //D3
|
||||||
|
PA_4, //D4
|
||||||
|
PA_5, //D5
|
||||||
|
PA_6, //D6
|
||||||
|
PA_7, //D7
|
||||||
|
PA_8, //D8
|
||||||
|
PA_9, //D9
|
||||||
|
PA_10, //D10
|
||||||
|
PA_11, //D11
|
||||||
|
PA_12, //D12
|
||||||
|
PA_13, //D13
|
||||||
|
PA_14, //D14
|
||||||
|
PA_15, //D15
|
||||||
|
|
||||||
|
PB_0, //D16
|
||||||
|
PB_1, //D17
|
||||||
|
PB_2, //D18
|
||||||
|
PB_3, //D19
|
||||||
|
PB_4, //D20
|
||||||
|
PB_5, //D21
|
||||||
|
PB_6, //D22
|
||||||
|
PB_7, //D23
|
||||||
|
PB_8, //D24
|
||||||
|
PB_9, //D25
|
||||||
|
PB_10, //D26
|
||||||
|
PB_11, //D27
|
||||||
|
PB_12, //D28
|
||||||
|
PB_13, //D29
|
||||||
|
PB_14, //D30
|
||||||
|
PB_15, //D31
|
||||||
|
|
||||||
|
PC_0, //D32
|
||||||
|
PC_1, //D33
|
||||||
|
PC_2, //D34
|
||||||
|
PC_3, //D35
|
||||||
|
PC_4, //D36
|
||||||
|
PC_5, //D37
|
||||||
|
PC_6, //D38
|
||||||
|
PC_7, //D39
|
||||||
|
PC_8, //D40
|
||||||
|
PC_9, //D41
|
||||||
|
PC_10, //D42
|
||||||
|
PC_11, //D43
|
||||||
|
PC_12, //D44
|
||||||
|
PC_13, //D45
|
||||||
|
PC_14, //D46
|
||||||
|
PC_15, //D47
|
||||||
|
|
||||||
|
PD_0, //D48
|
||||||
|
PD_1, //D49
|
||||||
|
PD_2, //D50
|
||||||
|
PD_3, //D51
|
||||||
|
PD_4, //D52
|
||||||
|
PD_5, //D53
|
||||||
|
PD_6, //D54
|
||||||
|
PD_7, //D55
|
||||||
|
PD_8, //D56
|
||||||
|
PD_9, //D57
|
||||||
|
PD_10, //D58
|
||||||
|
PD_11, //D59
|
||||||
|
PD_12, //D60
|
||||||
|
PD_13, //D61
|
||||||
|
PD_14, //D62
|
||||||
|
PD_15, //D63
|
||||||
|
|
||||||
|
PE_0, //D64
|
||||||
|
PE_1, //D65
|
||||||
|
PE_2, //D66
|
||||||
|
PE_3, //D67
|
||||||
|
PE_4, //D68
|
||||||
|
PE_5, //D69
|
||||||
|
PE_6, //D70
|
||||||
|
PE_7, //D71
|
||||||
|
PE_8, //D72
|
||||||
|
PE_9, //D73
|
||||||
|
PE_10, //D74
|
||||||
|
PE_11, //D75
|
||||||
|
PE_12, //D76
|
||||||
|
PE_13, //D77
|
||||||
|
PE_14, //D78
|
||||||
|
PE_15, //D79
|
||||||
|
};
|
||||||
|
|
||||||
|
// Analog (Ax) pin number array
|
||||||
|
const uint32_t analogInputPin[] = {
|
||||||
|
0, // A0, PA0
|
||||||
|
1, // A1, PA1
|
||||||
|
2, // A2, PA2
|
||||||
|
3, // A3, PA3
|
||||||
|
4, // A4, PA4
|
||||||
|
5, // A5, PA5
|
||||||
|
6, // A6, PA6
|
||||||
|
7, // A7, PA7
|
||||||
|
16, // A8, PB0
|
||||||
|
17, // A9, PB1
|
||||||
|
32, // A10, PC0
|
||||||
|
33, // A11, PC1
|
||||||
|
34, // A12, PC2
|
||||||
|
35, // A13, PC3
|
||||||
|
36, // A14, PC4
|
||||||
|
37, // A15, PC5
|
||||||
|
};
|
||||||
|
|
||||||
|
/******************************************************************************/
|
||||||
|
/* PLL (clocked by HSE) used as System clock source */
|
||||||
|
/******************************************************************************/
|
||||||
|
static bool SetSysClock_PLL_HSE(bool bypass)
|
||||||
|
{
|
||||||
|
RCC_OscInitTypeDef RCC_OscInitStruct = {};
|
||||||
|
RCC_ClkInitTypeDef RCC_ClkInitStruct = {};
|
||||||
|
RCC_PeriphCLKInitTypeDef PeriphClkInit = {};
|
||||||
|
bool ret = false;
|
||||||
|
|
||||||
|
// Initializes the CPU, AHB and APB busses clocks
|
||||||
|
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
||||||
|
if (bypass == false) {
|
||||||
|
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||||||
|
} else {
|
||||||
|
RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS;
|
||||||
|
}
|
||||||
|
RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
|
||||||
|
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
||||||
|
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||||
|
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||||
|
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9; // 8Mhz x 9 = 72MHz
|
||||||
|
|
||||||
|
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) {
|
||||||
|
// Initializes the CPU, AHB and APB busses clocks
|
||||||
|
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK
|
||||||
|
| RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
|
||||||
|
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||||
|
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||||
|
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
|
||||||
|
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
||||||
|
|
||||||
|
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) == HAL_OK) {
|
||||||
|
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_USB;
|
||||||
|
PeriphClkInit.AdcClockSelection = RCC_ADCPCLK2_DIV6;
|
||||||
|
PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5; // 72/1.5 = 48MHz
|
||||||
|
#ifndef USBCON
|
||||||
|
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC;
|
||||||
|
#endif
|
||||||
|
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) == HAL_OK) {
|
||||||
|
ret = true;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
/******************************************************************************/
|
||||||
|
/* PLL (clocked by HSI) used as System clock source (64MHz max) */
|
||||||
|
/******************************************************************************/
|
||||||
|
bool SetSysClock_PLL_HSI(void)
|
||||||
|
{
|
||||||
|
RCC_OscInitTypeDef RCC_OscInitStruct = {};
|
||||||
|
RCC_ClkInitTypeDef RCC_ClkInitStruct = {};
|
||||||
|
RCC_PeriphCLKInitTypeDef PeriphClkInit = {};
|
||||||
|
bool ret = false;
|
||||||
|
|
||||||
|
// Initializes the CPU, AHB and APB busses clocks
|
||||||
|
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
|
||||||
|
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
||||||
|
RCC_OscInitStruct.HSEState = RCC_HSE_OFF;
|
||||||
|
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
|
||||||
|
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||||
|
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI_DIV2; // 4 MHz
|
||||||
|
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL12; // 48 MHz
|
||||||
|
#ifndef USBCON
|
||||||
|
// When the HSI is used as a PLL clock input, the maximum
|
||||||
|
// system clock frequency that can be achieved is 64 MHz.
|
||||||
|
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL16; // 64 MHz, stay close to 72 for delay()
|
||||||
|
#endif
|
||||||
|
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) {
|
||||||
|
// Initializes the CPU, AHB and APB busses clocks
|
||||||
|
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK
|
||||||
|
| RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
|
||||||
|
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||||
|
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||||
|
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
|
||||||
|
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
||||||
|
|
||||||
|
// FLASH_LATENCY_1 may cause boot loops
|
||||||
|
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) == HAL_OK) {
|
||||||
|
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_USB;
|
||||||
|
PeriphClkInit.AdcClockSelection = RCC_ADCPCLK2_DIV4;
|
||||||
|
PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLL; // requires 48 MHz
|
||||||
|
#ifndef USBCON
|
||||||
|
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC;// No USB, RTC nor I2S
|
||||||
|
PeriphClkInit.AdcClockSelection = RCC_ADCPCLK2_DIV6; // 2 4 6 8
|
||||||
|
#endif
|
||||||
|
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) == HAL_OK) {
|
||||||
|
ret = true;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
void SystemClock_Config(void)
|
||||||
|
{
|
||||||
|
/*
|
||||||
|
* If HSE_VALUE is not 8MHz and you want use it, then:
|
||||||
|
* - Redefine HSE_VALUE to the correct HSE_VALUE
|
||||||
|
* - Redefine SystemClock_Config() with the correct settings
|
||||||
|
*/
|
||||||
|
#if HSE_VALUE == 8000000U
|
||||||
|
// 1- Try to start with HSE and external 8MHz xtal
|
||||||
|
if (SetSysClock_PLL_HSE(false) == false) {
|
||||||
|
// 2- If fail try to start with HSE and external clock
|
||||||
|
if (SetSysClock_PLL_HSE(true) == false) {
|
||||||
|
#endif
|
||||||
|
// 3- If fail start with HSI clock
|
||||||
|
if (SetSysClock_PLL_HSI() == false) {
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
#if HSE_VALUE == 8000000U
|
||||||
|
}
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
@ -0,0 +1,175 @@
|
|||||||
|
#pragma once
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif // __cplusplus
|
||||||
|
|
||||||
|
// STM32F103VET6 | DIGITAL | ANALOG | USART | TWI | SPI | SPECIAL |
|
||||||
|
//------------------|-------------|---------------|------------|-----------|----------------------|------------|
|
||||||
|
#define PA0 0 // | | A0 Nozzle T°c | | | | |
|
||||||
|
#define PA1 1 // | | A1 Bed T°c | | | | |
|
||||||
|
#define PA2 2 // | | | USART2_TX | | | |
|
||||||
|
#define PA3 3 // | | DAC_OUT1** | USART2_RX | | | |
|
||||||
|
#define PA4 4 // | | DAC_OUT2** | | | SPI1_SS*(wired?) | |
|
||||||
|
#define PA5 5 // | O | | | | SPI1_SCK EEPROM | |
|
||||||
|
#define PA6 6 // | I | | | | SPI1_MISO EEPROM | |
|
||||||
|
#define PA7 7 // | O | | | | SPI1_MOSI EEPROM | |
|
||||||
|
#define PA8 8 // | Od BED | | | | | |
|
||||||
|
#define PA9 9 // | | | USART1_TX | | | |
|
||||||
|
#define PA10 10 // | | | USART1_RX | | | |
|
||||||
|
#define PA11 11 // | I | | | | | USB_DM |
|
||||||
|
#define PA12 12 // | I | | | | | USB_DP |
|
||||||
|
#define PA13 13 // | I | | | | | SWD_SWDIO |
|
||||||
|
#define PA14 14 // | I | | | | | SWD_SWCLK |
|
||||||
|
#define PA15 15 // | Od FAN | | | | | |
|
||||||
|
// |-------------|---------------|------------|-----------|----------------------|------------|
|
||||||
|
#define PB0 16 // | | | | | | |
|
||||||
|
#define PB1 17 // | | | | | | |
|
||||||
|
#define PB2 18 // | I+ | | | | | BOOT1 |
|
||||||
|
#define PB3 19 // | O X_DIR | | | | | |
|
||||||
|
#define PB4 20 // | O X_STEP | | | | | |
|
||||||
|
#define PB5 21 // | O X_EN | | | | | |
|
||||||
|
#define PB6 22 // | O Y_DIR | | | | | |
|
||||||
|
#define PB7 23 // | O Y_STEP | | | | | |
|
||||||
|
#define PB8 24 // | O Y_EN | | | | | |
|
||||||
|
#define PB9 25 // | O Z_DIR | | | | | |
|
||||||
|
#define PB10 26 // | I+ | | USART3_TX* | TWI2_SCL* | | |
|
||||||
|
#define PB11 27 // | I+ | | USART3_RX* | TWI2_SDA* | | |
|
||||||
|
#define PB12 28 // | O TFT | | | | SPI2_SS | TOUCH_CS |
|
||||||
|
#define PB13 29 // | O TFT | | | | SPI2_SCK | TOUCH_SCK |
|
||||||
|
#define PB14 30 // | O TFT | | | | SPI2_MISO (bad>MOSI) | TOUCH_MOSI |
|
||||||
|
#define PB15 31 // | I TFT | | | | SPI2_MOSI (bad>MISO) | TOUCH_MISO |
|
||||||
|
// |-------------|---------------|------------|-----------|----------------------|------------|
|
||||||
|
#define PC0 32 // | I E_OUT | | | | | |
|
||||||
|
#define PC1 33 // | I+ X_MIN | | | | | |
|
||||||
|
#define PC2 34 // | O LED | | | | | |
|
||||||
|
#define PC3 35 // | I+ | | | | | |
|
||||||
|
#define PC4 36 // | O TFT | | | | | TFT RESET |
|
||||||
|
#define PC5 37 // | O CS1 | | | | for SPI1 EEPROM CS | |
|
||||||
|
#define PC6 38 // | I TFT | | | | | TOUCH_INT |
|
||||||
|
#define PC7 39 // | | | | | | |
|
||||||
|
#define PC8 40 // | x SDIO | | | | | SD_D0 |
|
||||||
|
#define PC9 41 // | x SDIO | | | | | SD_D1 |
|
||||||
|
#define PC10 42 // | x SDIO | | | | | SD_D2 |
|
||||||
|
#define PC11 43 // | x SDIO | | | | | SD_D3 |
|
||||||
|
#define PC12 44 // | O SDIO | | | | | SD_CLK |
|
||||||
|
#define PC13 45 // | I | | | | | |
|
||||||
|
#define PC14 46 // | I+ Y_MAX | | | | | |
|
||||||
|
#define PC15 47 // | I+ Y_MIN | | | | | |
|
||||||
|
// |-------------|---------------|------------|-----------|----------------------|------------|
|
||||||
|
#define PD0 48 // | O TFT | | | | | OSC_IN D2 |
|
||||||
|
#define PD1 49 // | O TFT | | | | | OSC_OUT D3 |
|
||||||
|
#define PD2 50 // | O SDIO | | | | | SD_CMD |
|
||||||
|
#define PD3 51 // | Od NOZZLE | | | | | |
|
||||||
|
#define PD4 52 // | O TFT | | | | | FSMC_NOE |
|
||||||
|
#define PD5 53 // | O TFT | | | | | FSMC_NWE |
|
||||||
|
#define PD6 54 // | I wired?* | | | | | FSMC_NWAIT*|
|
||||||
|
#define PD7 55 // | O TFT | | | | | FSMC_NE1/CS|
|
||||||
|
#define PD8 56 // | O TFT | | | | | FSMC_D13 |
|
||||||
|
#define PD9 57 // | O TFT | | | | | FSMC_D14 |
|
||||||
|
#define PD10 58 // | O TFT | | | | | FSMC_D15 |
|
||||||
|
#define PD11 59 // | O TFT | | | | | FSMC_A16 |
|
||||||
|
#define PD12 60 // | O TFT | | | | | TFT BL |
|
||||||
|
#define PD13 61 // | Od PWM* | | | | | SERVO0 |
|
||||||
|
#define PD14 62 // | O TFT | | | | | FSMC_D00 |
|
||||||
|
#define PD15 63 // | O TFT | | | | | FSMC_D01 |
|
||||||
|
// |-------------|---------------|------------|-----------|----------------------|------------|
|
||||||
|
#define PE0 64 // | O Z_STEP | | | | | |
|
||||||
|
#define PE1 65 // | O Z_EN | | | | | |
|
||||||
|
#define PE2 66 // | O E0_DIR | | | | | |
|
||||||
|
#define PE3 67 // | O E0_STEP | | | | | |
|
||||||
|
#define PE4 68 // | O E0_EN | | | | | |
|
||||||
|
#define PE5 69 // | I+ Z_MAX | | | | | |
|
||||||
|
#define PE6 70 // | I+ Z_MIN | | | | | |
|
||||||
|
#define PE7 71 // | O TFT | | | | | FSMC_D04 |
|
||||||
|
#define PE8 72 // | O TFT | | | | | FSMC_D05 |
|
||||||
|
#define PE9 73 // | O TFT | | | | | FSMC_D06 |
|
||||||
|
#define PE10 74 // | O TFT | | | | | FSMC_D07 |
|
||||||
|
#define PE11 75 // | O TFT | | | | | FSMC_D08 |
|
||||||
|
#define PE12 76 // | O TFT | | | | | FSMC_D09 |
|
||||||
|
#define PE13 77 // | O TFT | | | | | FSMC_D10 |
|
||||||
|
#define PE14 78 // | O TFT | | | | | FSMC_D11 |
|
||||||
|
#define PE15 79 // | O TFT | | | | | FSMC_D12 |
|
||||||
|
//------------------|-------------|---------------|------------|-----------|----------------------|------------|
|
||||||
|
|
||||||
|
// This must be a literal
|
||||||
|
#define NUM_DIGITAL_PINS 80
|
||||||
|
#define NUM_ANALOG_INPUTS 16 // 2 first are used, but cant be reduced to 2...
|
||||||
|
|
||||||
|
// On-board LED pin number
|
||||||
|
#ifndef LED_BUILTIN
|
||||||
|
#define LED_BUILTIN PC2
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// On-board user button (not wired)
|
||||||
|
#ifndef USER_BTN
|
||||||
|
#define USER_BTN PC13
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// SPI Definition (SPI1 EEPROM)
|
||||||
|
#define PIN_SPI_SS PC5
|
||||||
|
#define PIN_SPI_MOSI PA7
|
||||||
|
#define PIN_SPI_MISO PA6
|
||||||
|
#define PIN_SPI_SCK PA5
|
||||||
|
|
||||||
|
// I2C Definition (Unused)
|
||||||
|
#define PIN_WIRE_SDA PB11
|
||||||
|
#define PIN_WIRE_SCL PB10
|
||||||
|
|
||||||
|
// Timer Definitions
|
||||||
|
// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin
|
||||||
|
#ifndef TIMER_TONE
|
||||||
|
#define TIMER_TONE TIM6
|
||||||
|
#endif
|
||||||
|
#ifndef TIMER_SERVO
|
||||||
|
#define TIMER_SERVO TIM7
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// UART Definitions
|
||||||
|
// Define here Serial instance number to map on Serial generic name
|
||||||
|
#define SERIAL_UART_INSTANCE 1
|
||||||
|
|
||||||
|
// Default pin used for 'Serial' instance (linked to CH340 USB port)
|
||||||
|
#define PIN_SERIAL_RX PA10
|
||||||
|
#define PIN_SERIAL_TX PA9
|
||||||
|
#define PIN_SERIAL1_RX PA10
|
||||||
|
#define PIN_SERIAL1_TX PA9
|
||||||
|
// Default pin used for 'Serial2' instance (connector exists but unsoldered)
|
||||||
|
#define PIN_SERIAL2_RX PA3
|
||||||
|
#define PIN_SERIAL2_TX PA2
|
||||||
|
|
||||||
|
// Extra HAL modules
|
||||||
|
#if defined(STM32F103xE)
|
||||||
|
//#define HAL_DAC_MODULE_ENABLED (unused or maybe for the eeprom write?)
|
||||||
|
#define HAL_SD_MODULE_ENABLED
|
||||||
|
#define HAL_SRAM_MODULE_ENABLED
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
} // extern "C"
|
||||||
|
#endif
|
||||||
|
/*----------------------------------------------------------------------------
|
||||||
|
* Arduino objects - C++ only
|
||||||
|
*----------------------------------------------------------------------------*/
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
// These serial port names are intended to allow libraries and architecture-neutral
|
||||||
|
// sketches to automatically default to the correct port name for a particular type
|
||||||
|
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
|
||||||
|
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
|
||||||
|
//
|
||||||
|
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
|
||||||
|
//
|
||||||
|
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
|
||||||
|
//
|
||||||
|
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
|
||||||
|
//
|
||||||
|
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
|
||||||
|
//
|
||||||
|
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
|
||||||
|
// pins are NOT connected to anything by default.
|
||||||
|
#define SERIAL_PORT_MONITOR Serial1
|
||||||
|
#define SERIAL_PORT_HARDWARE Serial1
|
||||||
|
#define SERIAL_PORT_HARDWARE_OPEN Serial2
|
||||||
|
#endif
|
||||||
|
|
||||||
@ -330,19 +330,19 @@ upload_protocol = serial
|
|||||||
#
|
#
|
||||||
[env:STM32F103VE_longer]
|
[env:STM32F103VE_longer]
|
||||||
platform = ${common_stm32.platform}
|
platform = ${common_stm32.platform}
|
||||||
|
lib_deps = ${common.lib_deps}
|
||||||
|
https://github.com/tpruvot/STM32_Servo_OpenDrain/archive/2.0.zip
|
||||||
extends = stm32_variant
|
extends = stm32_variant
|
||||||
board = genericSTM32F103VE
|
board = genericSTM32F103VE
|
||||||
board_build.variant = MARLIN_F103Vx
|
board_build.variant = MARLIN_F103VE_LONGER
|
||||||
board_build.rename = project.bin
|
board_build.rename = project.bin
|
||||||
board_build.offset = 0x10000
|
board_build.offset = 0x10000
|
||||||
board_upload.offset_address = 0x08010000
|
board_upload.offset_address = 0x08010000
|
||||||
build_flags = ${stm32_variant.build_flags}
|
build_flags = ${stm32_variant.build_flags} -DMCU_STM32F103VE -DU20 -DTS_V12
|
||||||
-DMCU_STM32F103VE -DU20 -DTS_V12 -DLED_BUILTIN=PC2 -UPIN_WIRE_SDA
|
build_unflags = ${stm32_variant.build_unflags} -DUSBCON -DUSBD_USE_CDC -DHAL_PCD_MODULE_ENABLED
|
||||||
-UPIN_WIRE_SCL -DPIN_WIRE_SDA=PB11 -DPIN_WIRE_SCL=PB10
|
|
||||||
-DHAL_DAC_MODULE_DISABLED -DHAL_I2S_MODULE_DISABLED
|
|
||||||
build_unflags = ${stm32_variant.build_unflags}
|
|
||||||
-DUSBCON -DUSBD_USE_CDC -DHAL_PCD_MODULE_ENABLED
|
|
||||||
extra_scripts = ${stm32_variant.extra_scripts}
|
extra_scripts = ${stm32_variant.extra_scripts}
|
||||||
|
monitor_speed = 250000
|
||||||
|
debug_tool = stlink
|
||||||
|
|
||||||
#
|
#
|
||||||
# TRIGORILLA PRO (STM32F103ZET6)
|
# TRIGORILLA PRO (STM32F103ZET6)
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user