bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Support ANET_FULL_GRAPHICS_LCD_ALT_WIRING on BTT SKR 1.4 (#20427)

Browse Source
This commit is contained in:
Darren Peter 2020-12-23 07:21:02 +00:00 committed by GitHub
parent 2be027f92e
commit 2844086772
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
2 changed files with 31 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

31
Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h
View File

@ -260,7 +260,36 @@
#if HAS_WIRED_LCD && !HAS_BTT_EXP_MOT #if HAS_WIRED_LCD && !HAS_BTT_EXP_MOT
#if ENABLED(ANET_FULL_GRAPHICS_LCD_ALT_WIRING) #if ENABLED(ANET_FULL_GRAPHICS_LCD_ALT_WIRING)
#error "ANET_FULL_GRAPHICS_LCD_ALT_WIRING only applies to the ANET 1.0 board." #error "CAUTION! ANET_FULL_GRAPHICS_LCD_ALT_WIRING requires wiring modifications. See 'pins_BTT_SKR_V1_4.h' for details. Comment out this line to continue."
/**
* 1. Cut the tab off the LCD connector so it can be plugged into the "EXP1" connector the other way.
* 2. Swap the LCD's +5V (Pin2) and GND (Pin1) wires. (This is the critical part!)
*
* !!! If you are unsure, ask for help! Your motherboard may be damaged in some circumstances !!!
*
* The ANET_FULL_GRAPHICS_LCD_ALT_WIRING connector plug:
*
* BEFORE AFTER
* _____ _____
* GND | 1 2 | 5V 5V | 1 2 | GND
* CS | 3 4 | BTN_EN2 CS | 3 4 | BTN_EN2
* SID | 5 6 BTN_EN1 SID | 5 6 BTN_EN1
* open | 7 8 | BTN_ENC open | 7 8 | BTN_ENC
* CLK | 9 10| Beeper CLK | 9 10| Beeper
* ----- -----
* LCD LCD
*/
#define LCD_PINS_RS EXPA1_07_PIN
#define BTN_EN1 EXPA1_05_PIN
#define BTN_EN2 EXPA1_04_PIN
#define BTN_ENC EXPA1_10_PIN
#define LCD_PINS_ENABLE EXPA1_08_PIN
#define LCD_PINS_D4 EXPA1_06_PIN
#define BEEPER_PIN EXPA1_03_PIN
#elif ENABLED(ANET_FULL_GRAPHICS_LCD) #elif ENABLED(ANET_FULL_GRAPHICS_LCD)
#error "CAUTION! ANET_FULL_GRAPHICS_LCD requires wiring modifications. See 'pins_BTT_SKR_V1_4.h' for details. Comment out this line to continue." #error "CAUTION! ANET_FULL_GRAPHICS_LCD requires wiring modifications. See 'pins_BTT_SKR_V1_4.h' for details. Comment out this line to continue."

2
Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h
View File

@ -104,7 +104,7 @@
// //
// LCD / Controller // LCD / Controller
// //
#if HAS_WIRED_LCD && DISABLED(LCD_USE_I2C_BUZZER) #if !defined(BEEPER_PIN) && HAS_WIRED_LCD && DISABLED(LCD_USE_I2C_BUZZER)
#define BEEPER_PIN P1_30 // (37) not 5V tolerant #define BEEPER_PIN P1_30 // (37) not 5V tolerant
#endif #endif