Move Allen Key probe definition to the top
This commit is contained in:
parent
77cf648ed3
commit
27b5666e15
@ -563,6 +563,10 @@
|
|||||||
//#define Z_PROBE_SLED
|
//#define Z_PROBE_SLED
|
||||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||||
|
|
||||||
|
//
|
||||||
|
// Allen Key Probe is defined in the Delta example configurations.
|
||||||
|
//
|
||||||
|
|
||||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||||
// X and Y offsets must be integers.
|
// X and Y offsets must be integers.
|
||||||
//
|
//
|
||||||
@ -593,10 +597,6 @@
|
|||||||
// Use double touch for probing
|
// Use double touch for probing
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
//#define PROBE_DOUBLE_TOUCH
|
||||||
|
|
||||||
//
|
|
||||||
// Allen Key Probe is defined in the Delta example configurations.
|
|
||||||
//
|
|
||||||
|
|
||||||
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
||||||
//
|
//
|
||||||
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
||||||
|
@ -563,6 +563,10 @@
|
|||||||
//#define Z_PROBE_SLED
|
//#define Z_PROBE_SLED
|
||||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||||
|
|
||||||
|
//
|
||||||
|
// Allen Key Probe is defined in the Delta example configurations.
|
||||||
|
//
|
||||||
|
|
||||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||||
// X and Y offsets must be integers.
|
// X and Y offsets must be integers.
|
||||||
//
|
//
|
||||||
@ -593,10 +597,6 @@
|
|||||||
// Use double touch for probing
|
// Use double touch for probing
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
//#define PROBE_DOUBLE_TOUCH
|
||||||
|
|
||||||
//
|
|
||||||
// Allen Key Probe is defined in the Delta example configurations.
|
|
||||||
//
|
|
||||||
|
|
||||||
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
||||||
//
|
//
|
||||||
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
||||||
|
@ -546,6 +546,10 @@
|
|||||||
//#define Z_PROBE_SLED
|
//#define Z_PROBE_SLED
|
||||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||||
|
|
||||||
|
//
|
||||||
|
// Allen Key Probe is defined in the Delta example configurations.
|
||||||
|
//
|
||||||
|
|
||||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||||
// X and Y offsets must be integers.
|
// X and Y offsets must be integers.
|
||||||
//
|
//
|
||||||
@ -576,10 +580,6 @@
|
|||||||
// Use double touch for probing
|
// Use double touch for probing
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
//#define PROBE_DOUBLE_TOUCH
|
||||||
|
|
||||||
//
|
|
||||||
// Allen Key Probe is defined in the Delta example configurations.
|
|
||||||
//
|
|
||||||
|
|
||||||
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
||||||
//
|
//
|
||||||
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
||||||
|
@ -546,6 +546,10 @@
|
|||||||
//#define Z_PROBE_SLED
|
//#define Z_PROBE_SLED
|
||||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||||
|
|
||||||
|
//
|
||||||
|
// Allen Key Probe is defined in the Delta example configurations.
|
||||||
|
//
|
||||||
|
|
||||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||||
// X and Y offsets must be integers.
|
// X and Y offsets must be integers.
|
||||||
//
|
//
|
||||||
@ -576,10 +580,6 @@
|
|||||||
// Use double touch for probing
|
// Use double touch for probing
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
//#define PROBE_DOUBLE_TOUCH
|
||||||
|
|
||||||
//
|
|
||||||
// Allen Key Probe is defined in the Delta example configurations.
|
|
||||||
//
|
|
||||||
|
|
||||||
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
||||||
//
|
//
|
||||||
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
||||||
|
@ -555,6 +555,10 @@
|
|||||||
//#define Z_PROBE_SLED
|
//#define Z_PROBE_SLED
|
||||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||||
|
|
||||||
|
//
|
||||||
|
// Allen Key Probe is defined in the Delta example configurations.
|
||||||
|
//
|
||||||
|
|
||||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||||
// X and Y offsets must be integers.
|
// X and Y offsets must be integers.
|
||||||
//
|
//
|
||||||
@ -585,10 +589,6 @@
|
|||||||
// Use double touch for probing
|
// Use double touch for probing
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
//#define PROBE_DOUBLE_TOUCH
|
||||||
|
|
||||||
//
|
|
||||||
// Allen Key Probe is defined in the Delta example configurations.
|
|
||||||
//
|
|
||||||
|
|
||||||
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
||||||
//
|
//
|
||||||
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
||||||
|
@ -557,6 +557,10 @@
|
|||||||
//#define Z_PROBE_SLED
|
//#define Z_PROBE_SLED
|
||||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||||
|
|
||||||
|
//
|
||||||
|
// Allen Key Probe is defined in the Delta example configurations.
|
||||||
|
//
|
||||||
|
|
||||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||||
// X and Y offsets must be integers.
|
// X and Y offsets must be integers.
|
||||||
//
|
//
|
||||||
@ -587,10 +591,6 @@
|
|||||||
// Use double touch for probing
|
// Use double touch for probing
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
//#define PROBE_DOUBLE_TOUCH
|
||||||
|
|
||||||
//
|
|
||||||
// Allen Key Probe is defined in the Delta example configurations.
|
|
||||||
//
|
|
||||||
|
|
||||||
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
||||||
//
|
//
|
||||||
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
||||||
|
@ -592,6 +592,10 @@
|
|||||||
//#define Z_PROBE_SLED
|
//#define Z_PROBE_SLED
|
||||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||||
|
|
||||||
|
//
|
||||||
|
// Allen Key Probe is defined in the Delta example configurations.
|
||||||
|
//
|
||||||
|
|
||||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||||
// X and Y offsets must be integers.
|
// X and Y offsets must be integers.
|
||||||
//
|
//
|
||||||
@ -622,10 +626,6 @@
|
|||||||
// Use double touch for probing
|
// Use double touch for probing
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
//#define PROBE_DOUBLE_TOUCH
|
||||||
|
|
||||||
//
|
|
||||||
// Allen Key Probe is defined in the Delta example configurations.
|
|
||||||
//
|
|
||||||
|
|
||||||
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
||||||
//
|
//
|
||||||
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
||||||
|
@ -563,6 +563,10 @@
|
|||||||
//#define Z_PROBE_SLED
|
//#define Z_PROBE_SLED
|
||||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||||
|
|
||||||
|
//
|
||||||
|
// Allen Key Probe is defined in the Delta example configurations.
|
||||||
|
//
|
||||||
|
|
||||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||||
// X and Y offsets must be integers.
|
// X and Y offsets must be integers.
|
||||||
//
|
//
|
||||||
@ -593,10 +597,6 @@
|
|||||||
// Use double touch for probing
|
// Use double touch for probing
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
//#define PROBE_DOUBLE_TOUCH
|
||||||
|
|
||||||
//
|
|
||||||
// Allen Key Probe is defined in the Delta example configurations.
|
|
||||||
//
|
|
||||||
|
|
||||||
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
||||||
//
|
//
|
||||||
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
||||||
|
@ -563,6 +563,10 @@
|
|||||||
//#define Z_PROBE_SLED
|
//#define Z_PROBE_SLED
|
||||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||||
|
|
||||||
|
//
|
||||||
|
// Allen Key Probe is defined in the Delta example configurations.
|
||||||
|
//
|
||||||
|
|
||||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||||
// X and Y offsets must be integers.
|
// X and Y offsets must be integers.
|
||||||
//
|
//
|
||||||
@ -593,10 +597,6 @@
|
|||||||
// Use double touch for probing
|
// Use double touch for probing
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
//#define PROBE_DOUBLE_TOUCH
|
||||||
|
|
||||||
//
|
|
||||||
// Allen Key Probe is defined in the Delta example configurations.
|
|
||||||
//
|
|
||||||
|
|
||||||
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
||||||
//
|
//
|
||||||
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
||||||
|
@ -563,6 +563,10 @@
|
|||||||
//#define Z_PROBE_SLED
|
//#define Z_PROBE_SLED
|
||||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||||
|
|
||||||
|
//
|
||||||
|
// Allen Key Probe is defined in the Delta example configurations.
|
||||||
|
//
|
||||||
|
|
||||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||||
// X and Y offsets must be integers.
|
// X and Y offsets must be integers.
|
||||||
//
|
//
|
||||||
@ -593,10 +597,6 @@
|
|||||||
// Use double touch for probing
|
// Use double touch for probing
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
//#define PROBE_DOUBLE_TOUCH
|
||||||
|
|
||||||
//
|
|
||||||
// Allen Key Probe is defined in the Delta example configurations.
|
|
||||||
//
|
|
||||||
|
|
||||||
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
||||||
//
|
//
|
||||||
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
||||||
|
@ -562,6 +562,10 @@
|
|||||||
//#define Z_PROBE_SLED
|
//#define Z_PROBE_SLED
|
||||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||||
|
|
||||||
|
//
|
||||||
|
// Allen Key Probe is defined in the Delta example configurations.
|
||||||
|
//
|
||||||
|
|
||||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||||
// X and Y offsets must be integers.
|
// X and Y offsets must be integers.
|
||||||
//
|
//
|
||||||
@ -592,10 +596,6 @@
|
|||||||
// Use double touch for probing
|
// Use double touch for probing
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
//#define PROBE_DOUBLE_TOUCH
|
||||||
|
|
||||||
//
|
|
||||||
// Allen Key Probe is defined in the Delta example configurations.
|
|
||||||
//
|
|
||||||
|
|
||||||
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
||||||
//
|
//
|
||||||
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
||||||
|
@ -565,6 +565,10 @@
|
|||||||
//#define Z_PROBE_SLED
|
//#define Z_PROBE_SLED
|
||||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||||
|
|
||||||
|
//
|
||||||
|
// Allen Key Probe is defined in the Delta example configurations.
|
||||||
|
//
|
||||||
|
|
||||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||||
// X and Y offsets must be integers.
|
// X and Y offsets must be integers.
|
||||||
//
|
//
|
||||||
@ -595,10 +599,6 @@
|
|||||||
// Use double touch for probing
|
// Use double touch for probing
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
//#define PROBE_DOUBLE_TOUCH
|
||||||
|
|
||||||
//
|
|
||||||
// Allen Key Probe is defined in the Delta example configurations.
|
|
||||||
//
|
|
||||||
|
|
||||||
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
||||||
//
|
//
|
||||||
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
||||||
|
@ -563,6 +563,10 @@
|
|||||||
//#define Z_PROBE_SLED
|
//#define Z_PROBE_SLED
|
||||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||||
|
|
||||||
|
//
|
||||||
|
// Allen Key Probe is defined in the Delta example configurations.
|
||||||
|
//
|
||||||
|
|
||||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||||
// X and Y offsets must be integers.
|
// X and Y offsets must be integers.
|
||||||
//
|
//
|
||||||
@ -593,10 +597,6 @@
|
|||||||
// Use double touch for probing
|
// Use double touch for probing
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
//#define PROBE_DOUBLE_TOUCH
|
||||||
|
|
||||||
//
|
|
||||||
// Allen Key Probe is defined in the Delta example configurations.
|
|
||||||
//
|
|
||||||
|
|
||||||
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
||||||
//
|
//
|
||||||
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
||||||
|
@ -564,6 +564,10 @@
|
|||||||
//#define Z_PROBE_SLED
|
//#define Z_PROBE_SLED
|
||||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||||
|
|
||||||
|
//
|
||||||
|
// Allen Key Probe is defined in the Delta example configurations.
|
||||||
|
//
|
||||||
|
|
||||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||||
// X and Y offsets must be integers.
|
// X and Y offsets must be integers.
|
||||||
//
|
//
|
||||||
@ -594,10 +598,6 @@
|
|||||||
// Use double touch for probing
|
// Use double touch for probing
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
//#define PROBE_DOUBLE_TOUCH
|
||||||
|
|
||||||
//
|
|
||||||
// Allen Key Probe is defined in the Delta example configurations.
|
|
||||||
//
|
|
||||||
|
|
||||||
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
||||||
//
|
//
|
||||||
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
||||||
|
@ -578,6 +578,10 @@
|
|||||||
//#define Z_PROBE_SLED
|
//#define Z_PROBE_SLED
|
||||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||||
|
|
||||||
|
//
|
||||||
|
// Allen Key Probe is defined in the Delta example configurations.
|
||||||
|
//
|
||||||
|
|
||||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||||
// X and Y offsets must be integers.
|
// X and Y offsets must be integers.
|
||||||
//
|
//
|
||||||
@ -608,10 +612,6 @@
|
|||||||
// Use double touch for probing
|
// Use double touch for probing
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
//#define PROBE_DOUBLE_TOUCH
|
||||||
|
|
||||||
//
|
|
||||||
// Allen Key Probe is defined in the Delta example configurations.
|
|
||||||
//
|
|
||||||
|
|
||||||
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
||||||
//
|
//
|
||||||
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
||||||
|
@ -584,6 +584,10 @@
|
|||||||
//#define Z_PROBE_SLED
|
//#define Z_PROBE_SLED
|
||||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||||
|
|
||||||
|
//
|
||||||
|
// Allen Key Probe is defined in the Delta example configurations.
|
||||||
|
//
|
||||||
|
|
||||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||||
// X and Y offsets must be integers.
|
// X and Y offsets must be integers.
|
||||||
//
|
//
|
||||||
@ -614,10 +618,6 @@
|
|||||||
// Use double touch for probing
|
// Use double touch for probing
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
//#define PROBE_DOUBLE_TOUCH
|
||||||
|
|
||||||
//
|
|
||||||
// Allen Key Probe is defined in the Delta example configurations.
|
|
||||||
//
|
|
||||||
|
|
||||||
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
||||||
//
|
//
|
||||||
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
||||||
|
@ -555,6 +555,10 @@
|
|||||||
//#define Z_PROBE_SLED
|
//#define Z_PROBE_SLED
|
||||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||||
|
|
||||||
|
//
|
||||||
|
// Allen Key Probe is defined in the Delta example configurations.
|
||||||
|
//
|
||||||
|
|
||||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||||
// X and Y offsets must be integers.
|
// X and Y offsets must be integers.
|
||||||
//
|
//
|
||||||
@ -585,10 +589,6 @@
|
|||||||
// Use double touch for probing
|
// Use double touch for probing
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
//#define PROBE_DOUBLE_TOUCH
|
||||||
|
|
||||||
//
|
|
||||||
// Allen Key Probe is defined in the Delta example configurations.
|
|
||||||
//
|
|
||||||
|
|
||||||
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
||||||
//
|
//
|
||||||
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
||||||
|
@ -563,6 +563,10 @@
|
|||||||
//#define Z_PROBE_SLED
|
//#define Z_PROBE_SLED
|
||||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||||
|
|
||||||
|
//
|
||||||
|
// Allen Key Probe is defined in the Delta example configurations.
|
||||||
|
//
|
||||||
|
|
||||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||||
// X and Y offsets must be integers.
|
// X and Y offsets must be integers.
|
||||||
//
|
//
|
||||||
@ -593,10 +597,6 @@
|
|||||||
// Use double touch for probing
|
// Use double touch for probing
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
//#define PROBE_DOUBLE_TOUCH
|
||||||
|
|
||||||
//
|
|
||||||
// Allen Key Probe is defined in the Delta example configurations.
|
|
||||||
//
|
|
||||||
|
|
||||||
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
||||||
//
|
//
|
||||||
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
||||||
|
@ -621,6 +621,10 @@
|
|||||||
//#define Z_PROBE_SLED
|
//#define Z_PROBE_SLED
|
||||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||||
|
|
||||||
|
//
|
||||||
|
// Allen Key Probe is defined in the Delta example configurations.
|
||||||
|
//
|
||||||
|
|
||||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||||
// X and Y offsets must be integers.
|
// X and Y offsets must be integers.
|
||||||
//
|
//
|
||||||
|
@ -608,6 +608,10 @@
|
|||||||
//#define Z_PROBE_SLED
|
//#define Z_PROBE_SLED
|
||||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||||
|
|
||||||
|
//
|
||||||
|
// Allen Key Probe is defined in the Delta example configurations.
|
||||||
|
//
|
||||||
|
|
||||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||||
// X and Y offsets must be integers.
|
// X and Y offsets must be integers.
|
||||||
//
|
//
|
||||||
|
@ -608,6 +608,10 @@
|
|||||||
//#define Z_PROBE_SLED
|
//#define Z_PROBE_SLED
|
||||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||||
|
|
||||||
|
//
|
||||||
|
// Allen Key Probe is defined in the Delta example configurations.
|
||||||
|
//
|
||||||
|
|
||||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||||
// X and Y offsets must be integers.
|
// X and Y offsets must be integers.
|
||||||
//
|
//
|
||||||
|
@ -602,6 +602,10 @@
|
|||||||
//#define Z_PROBE_SLED
|
//#define Z_PROBE_SLED
|
||||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||||
|
|
||||||
|
//
|
||||||
|
// Allen Key Probe is defined in the Delta example configurations.
|
||||||
|
//
|
||||||
|
|
||||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||||
// X and Y offsets must be integers.
|
// X and Y offsets must be integers.
|
||||||
//
|
//
|
||||||
|
@ -621,6 +621,10 @@
|
|||||||
//#define Z_PROBE_SLED
|
//#define Z_PROBE_SLED
|
||||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||||
|
|
||||||
|
//
|
||||||
|
// Allen Key Probe is defined in the Delta example configurations.
|
||||||
|
//
|
||||||
|
|
||||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||||
// X and Y offsets must be integers.
|
// X and Y offsets must be integers.
|
||||||
//
|
//
|
||||||
|
@ -566,6 +566,10 @@
|
|||||||
//#define Z_PROBE_SLED
|
//#define Z_PROBE_SLED
|
||||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||||
|
|
||||||
|
//
|
||||||
|
// Allen Key Probe is defined in the Delta example configurations.
|
||||||
|
//
|
||||||
|
|
||||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||||
// X and Y offsets must be integers.
|
// X and Y offsets must be integers.
|
||||||
//
|
//
|
||||||
@ -596,10 +600,6 @@
|
|||||||
// Use double touch for probing
|
// Use double touch for probing
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
//#define PROBE_DOUBLE_TOUCH
|
||||||
|
|
||||||
//
|
|
||||||
// Allen Key Probe is defined in the Delta example configurations.
|
|
||||||
//
|
|
||||||
|
|
||||||
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
||||||
//
|
//
|
||||||
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
||||||
|
@ -559,6 +559,10 @@
|
|||||||
//#define Z_PROBE_SLED
|
//#define Z_PROBE_SLED
|
||||||
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||||
|
|
||||||
|
//
|
||||||
|
// Allen Key Probe is defined in the Delta example configurations.
|
||||||
|
//
|
||||||
|
|
||||||
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
|
||||||
// X and Y offsets must be integers.
|
// X and Y offsets must be integers.
|
||||||
//
|
//
|
||||||
@ -589,10 +593,6 @@
|
|||||||
// Use double touch for probing
|
// Use double touch for probing
|
||||||
//#define PROBE_DOUBLE_TOUCH
|
//#define PROBE_DOUBLE_TOUCH
|
||||||
|
|
||||||
//
|
|
||||||
// Allen Key Probe is defined in the Delta example configurations.
|
|
||||||
//
|
|
||||||
|
|
||||||
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
||||||
//
|
//
|
||||||
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
|
||||||
|
Loading…
Reference in New Issue
Block a user