diff --git a/Marlin/src/lcd/menu/menu.cpp b/Marlin/src/lcd/menu/menu.cpp index 69144fd64c..4651d29106 100644 --- a/Marlin/src/lcd/menu/menu.cpp +++ b/Marlin/src/lcd/menu/menu.cpp @@ -134,7 +134,7 @@ void MenuItem_gcode::action(PGM_P const, PGM_P const pgcode) { queue.inject_P(pg * void MenuItem_int3::action_edit(PGM_P const pstr, int16_t * const ptr, const int16_t minValue, const int16_t maxValue, const screenFunc_t callback = null, const bool live = false); * * You can then use one of the menu macros to present the edit interface: - * MENU_ITEM_EDIT(int3, MSG_SPEED, &feedrate_percentage, 10, 999) + * EDIT_ITEM(int3, MSG_SPEED, &feedrate_percentage, 10, 999) * * This expands into a more primitive menu item: * MENU_ITEM_VARIANT(int3, _edit, MSG_SPEED, PSTR(MSG_SPEED), &feedrate_percentage, 10, 999) diff --git a/Marlin/src/lcd/menu/menu.h b/Marlin/src/lcd/menu/menu.h index 2d7680e10e..10ef89be1b 100644 --- a/Marlin/src/lcd/menu/menu.h +++ b/Marlin/src/lcd/menu/menu.h @@ -293,17 +293,17 @@ class MenuItem_bool { * MenuItem_::action[_variant](arg3...) * * Examples: - * MENU_ITEM(back, MSG_WATCH, 0 [dummy parameter] ) - * or - * MENU_BACK(MSG_WATCH) + * BACK_ITEM(MSG_WATCH) + * MENU_ITEM(back, MSG_WATCH) * draw_menu_item_back(sel, row, PSTR(MSG_WATCH)) * MenuItem_back::action() * + * ACTION_ITEM(MSG_PAUSE_PRINT, lcd_sdcard_pause) * MENU_ITEM(function, MSG_PAUSE_PRINT, lcd_sdcard_pause) * draw_menu_item_function(sel, row, PSTR(MSG_PAUSE_PRINT), lcd_sdcard_pause) * MenuItem_function::action(lcd_sdcard_pause) * - * MENU_ITEM_EDIT(int3, MSG_SPEED, &feedrate_percentage, 10, 999) + * EDIT_ITEM(int3, MSG_SPEED, &feedrate_percentage, 10, 999) * draw_menu_item_edit_int3(sel, row, PSTR(MSG_SPEED), &feedrate_percentage, 10, 999) * MenuItem_int3::action_edit(PSTR(MSG_SPEED), &feedrate_percentage, 10, 999) * @@ -346,14 +346,16 @@ class MenuItem_bool { #define STATIC_ITEM(LABEL, V...) STATIC_ITEM_P(PSTR(LABEL), ##V) -#define MENU_BACK(LABEL) MENU_ITEM(back, LABEL) -#define MENU_ITEM_DUMMY() do { _thisItemNr++; }while(0) -#define MENU_ITEM_P(TYPE, PLABEL, V...) _MENU_ITEM_VARIANT_P(TYPE, , false, PLABEL, ##V) -#define MENU_ITEM(TYPE, LABEL, V...) _MENU_ITEM_VARIANT_P(TYPE, , false, PSTR(LABEL), ##V) -#define MENU_ITEM_EDIT(TYPE, LABEL, V...) _MENU_ITEM_VARIANT_P(TYPE, _edit, false, PSTR(LABEL), ##V) -#define MENU_ITEM_EDIT_CALLBACK(TYPE, LABEL, V...) _MENU_ITEM_VARIANT_P(TYPE, _edit, false, PSTR(LABEL), ##V) -#define MENU_MULTIPLIER_ITEM_EDIT(TYPE, LABEL, V...) _MENU_ITEM_VARIANT_P(TYPE, _edit, true, PSTR(LABEL), ##V) -#define MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(TYPE, LABEL, V...) _MENU_ITEM_VARIANT_P(TYPE, _edit, true, PSTR(LABEL), ##V) +#define MENU_ITEM_P(TYPE, PLABEL, V...) _MENU_ITEM_VARIANT_P(TYPE, , false, PLABEL, ##V) +#define MENU_ITEM(TYPE, LABEL, V...) _MENU_ITEM_VARIANT_P(TYPE, , false, PSTR(LABEL), ##V) +#define EDIT_ITEM(TYPE, LABEL, V...) _MENU_ITEM_VARIANT_P(TYPE, _edit, false, PSTR(LABEL), ##V) +#define EDIT_ITEM_FAST(TYPE, LABEL, V...) _MENU_ITEM_VARIANT_P(TYPE, _edit, true, PSTR(LABEL), ##V) + +#define SKIP_ITEM() (_thisItemNr++) +#define BACK_ITEM(LABEL) MENU_ITEM(back,LABEL) +#define SUBMENU(LABEL, DEST) MENU_ITEM(submenu, LABEL, DEST) +#define GCODES_ITEM(LABEL, GCODES) MENU_ITEM(gcode, LABEL, GCODES) +#define ACTION_ITEM(LABEL, ACTION) MENU_ITEM(function, LABEL, ACTION) //////////////////////////////////////////// /////////////// Menu Screens /////////////// diff --git a/Marlin/src/lcd/menu/menu_advanced.cpp b/Marlin/src/lcd/menu/menu_advanced.cpp index 9be24e2c0a..59c697daab 100644 --- a/Marlin/src/lcd/menu/menu_advanced.cpp +++ b/Marlin/src/lcd/menu/menu_advanced.cpp @@ -62,13 +62,13 @@ void menu_backlash(); void menu_dac() { dac_driver_getValues(); START_MENU(); - MENU_BACK(MSG_ADVANCED_SETTINGS); - #define EDIT_DAC_PERCENT(N) MENU_ITEM_EDIT_CALLBACK(uint8, MSG_##N " " MSG_DAC_PERCENT, &driverPercent[_AXIS(N)], 0, 100, dac_driver_commit) + BACK_ITEM(MSG_ADVANCED_SETTINGS); + #define EDIT_DAC_PERCENT(N) EDIT_ITEM(uint8, MSG_##N " " MSG_DAC_PERCENT, &driverPercent[_AXIS(N)], 0, 100, dac_driver_commit) EDIT_DAC_PERCENT(X); EDIT_DAC_PERCENT(Y); EDIT_DAC_PERCENT(Z); EDIT_DAC_PERCENT(E); - MENU_ITEM(function, MSG_DAC_EEPROM_WRITE, dac_commit_eeprom); + ACTION_ITEM(MSG_DAC_EEPROM_WRITE, dac_commit_eeprom); END_MENU(); } @@ -80,8 +80,8 @@ void menu_backlash(); void menu_pwm() { START_MENU(); - MENU_BACK(MSG_ADVANCED_SETTINGS); - #define EDIT_CURRENT_PWM(LABEL,I) MENU_ITEM_EDIT_CALLBACK(long5, LABEL, &stepper.motor_current_setting[I], 100, 2000, stepper.refresh_motor_power) + BACK_ITEM(MSG_ADVANCED_SETTINGS); + #define EDIT_CURRENT_PWM(LABEL,I) EDIT_ITEM(long5, LABEL, &stepper.motor_current_setting[I], 100, 2000, stepper.refresh_motor_power) #if PIN_EXISTS(MOTOR_CURRENT_PWM_XY) EDIT_CURRENT_PWM(MSG_X MSG_Y, 0); #endif @@ -116,13 +116,13 @@ void menu_backlash(); // void menu_advanced_filament() { START_MENU(); - MENU_BACK(MSG_ADVANCED_SETTINGS); + BACK_ITEM(MSG_ADVANCED_SETTINGS); #if ENABLED(LIN_ADVANCE) #if EXTRUDERS == 1 - MENU_ITEM_EDIT(float52, MSG_ADVANCE_K, &planner.extruder_advance_K[0], 0, 999); + EDIT_ITEM(float52, MSG_ADVANCE_K, &planner.extruder_advance_K[0], 0, 999); #elif EXTRUDERS > 1 - #define EDIT_ADVANCE_K(N) MENU_ITEM_EDIT(float52, MSG_ADVANCE_K MSG_E##N, &planner.extruder_advance_K[N-1], 0, 999) + #define EDIT_ADVANCE_K(N) EDIT_ITEM(float52, MSG_ADVANCE_K MSG_E##N, &planner.extruder_advance_K[N-1], 0, 999) EDIT_ADVANCE_K(1); EDIT_ADVANCE_K(2); #if EXTRUDERS > 2 @@ -141,14 +141,14 @@ void menu_backlash(); #endif #if DISABLED(NO_VOLUMETRICS) - MENU_ITEM_EDIT_CALLBACK(bool, MSG_VOLUMETRIC_ENABLED, &parser.volumetric_enabled, planner.calculate_volumetric_multipliers); + EDIT_ITEM(bool, MSG_VOLUMETRIC_ENABLED, &parser.volumetric_enabled, planner.calculate_volumetric_multipliers); if (parser.volumetric_enabled) { #if EXTRUDERS == 1 - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM, &planner.filament_size[0], 1.5f, 3.25f, planner.calculate_volumetric_multipliers); + EDIT_ITEM_FAST(float43, MSG_FILAMENT_DIAM, &planner.filament_size[0], 1.5f, 3.25f, planner.calculate_volumetric_multipliers); #else // EXTRUDERS > 1 - #define EDIT_FIL_DIAM(N) MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM MSG_DIAM_E##N, &planner.filament_size[N-1], 1.5f, 3.25f, planner.calculate_volumetric_multipliers) - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM, &planner.filament_size[active_extruder], 1.5f, 3.25f, planner.calculate_volumetric_multipliers); + #define EDIT_FIL_DIAM(N) EDIT_ITEM_FAST(float43, MSG_FILAMENT_DIAM MSG_DIAM_E##N, &planner.filament_size[N-1], 1.5f, 3.25f, planner.calculate_volumetric_multipliers) + EDIT_ITEM_FAST(float43, MSG_FILAMENT_DIAM, &planner.filament_size[active_extruder], 1.5f, 3.25f, planner.calculate_volumetric_multipliers); EDIT_FIL_DIAM(1); EDIT_FIL_DIAM(2); #if EXTRUDERS > 2 @@ -177,10 +177,10 @@ void menu_backlash(); ; #if EXTRUDERS == 1 - MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_UNLOAD, &fc_settings[0].unload_length, 0, extrude_maxlength); + EDIT_ITEM_FAST(float3, MSG_FILAMENT_UNLOAD, &fc_settings[0].unload_length, 0, extrude_maxlength); #elif EXTRUDERS > 1 - #define EDIT_FIL_UNLOAD(N) MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_UNLOAD MSG_DIAM_E##N, &fc_settings[N-1].unload_length, 0, extrude_maxlength) - MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_UNLOAD, &fc_settings[active_extruder].unload_length, 0, extrude_maxlength); + #define EDIT_FIL_UNLOAD(N) EDIT_ITEM_FAST(float3, MSG_FILAMENT_UNLOAD MSG_DIAM_E##N, &fc_settings[N-1].unload_length, 0, extrude_maxlength) + EDIT_ITEM_FAST(float3, MSG_FILAMENT_UNLOAD, &fc_settings[active_extruder].unload_length, 0, extrude_maxlength); EDIT_FIL_UNLOAD(1); EDIT_FIL_UNLOAD(2); #if EXTRUDERS > 2 @@ -198,10 +198,10 @@ void menu_backlash(); #endif // EXTRUDERS > 1 #if EXTRUDERS == 1 - MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_LOAD, &fc_settings[0].load_length, 0, extrude_maxlength); + EDIT_ITEM_FAST(float3, MSG_FILAMENT_LOAD, &fc_settings[0].load_length, 0, extrude_maxlength); #elif EXTRUDERS > 1 - #define EDIT_FIL_LOAD(N) MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_LOAD MSG_DIAM_E##N, &fc_settings[N-1].load_length, 0, extrude_maxlength) - MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_LOAD, &fc_settings[active_extruder].load_length, 0, extrude_maxlength); + #define EDIT_FIL_LOAD(N) EDIT_ITEM_FAST(float3, MSG_FILAMENT_LOAD MSG_DIAM_E##N, &fc_settings[N-1].load_length, 0, extrude_maxlength) + EDIT_ITEM_FAST(float3, MSG_FILAMENT_LOAD, &fc_settings[active_extruder].load_length, 0, extrude_maxlength); EDIT_FIL_LOAD(1); EDIT_FIL_LOAD(2); #if EXTRUDERS > 2 @@ -220,7 +220,7 @@ void menu_backlash(); #endif #if ENABLED(FILAMENT_RUNOUT_SENSOR) && FILAMENT_RUNOUT_DISTANCE_MM - MENU_ITEM_EDIT_CALLBACK(float3, MSG_RUNOUT_DISTANCE_MM, &lcd_runout_distance_mm, 1, 30, []{ + EDIT_ITEM(float3, MSG_RUNOUT_DISTANCE_MM, &lcd_runout_distance_mm, 1, 30, []{ runout.set_runout_distance(lcd_runout_distance_mm); }); #endif @@ -328,15 +328,15 @@ void menu_backlash(); void menu_advanced_temperature() { START_MENU(); - MENU_BACK(MSG_ADVANCED_SETTINGS); + BACK_ITEM(MSG_ADVANCED_SETTINGS); // // Autotemp, Min, Max, Fact // #if ENABLED(AUTOTEMP) && HAS_TEMP_HOTEND - MENU_ITEM_EDIT(bool, MSG_AUTOTEMP, &planner.autotemp_enabled); - MENU_ITEM_EDIT(float3, MSG_MIN, &planner.autotemp_min, 0, float(HEATER_0_MAXTEMP) - 15); - MENU_ITEM_EDIT(float3, MSG_MAX, &planner.autotemp_max, 0, float(HEATER_0_MAXTEMP) - 15); - MENU_ITEM_EDIT(float52, MSG_FACTOR, &planner.autotemp_factor, 0, 10); + EDIT_ITEM(bool, MSG_AUTOTEMP, &planner.autotemp_enabled); + EDIT_ITEM(float3, MSG_MIN, &planner.autotemp_min, 0, float(HEATER_0_MAXTEMP) - 15); + EDIT_ITEM(float3, MSG_MAX, &planner.autotemp_max, 0, float(HEATER_0_MAXTEMP) - 15); + EDIT_ITEM(float52, MSG_FACTOR, &planner.autotemp_factor, 0, 10); #endif // @@ -352,14 +352,14 @@ void menu_backlash(); #define _PID_BASE_MENU_ITEMS(ELABEL, eindex) \ raw_Ki = unscalePID_i(PID_PARAM(Ki, eindex)); \ raw_Kd = unscalePID_d(PID_PARAM(Kd, eindex)); \ - MENU_ITEM_EDIT(float52sign, MSG_PID_P ELABEL, &PID_PARAM(Kp, eindex), 1, 9990); \ - MENU_ITEM_EDIT_CALLBACK(float52sign, MSG_PID_I ELABEL, &raw_Ki, 0.01f, 9990, copy_and_scalePID_i_E ## eindex); \ - MENU_ITEM_EDIT_CALLBACK(float52sign, MSG_PID_D ELABEL, &raw_Kd, 1, 9990, copy_and_scalePID_d_E ## eindex) + EDIT_ITEM(float52sign, MSG_PID_P ELABEL, &PID_PARAM(Kp, eindex), 1, 9990); \ + EDIT_ITEM(float52sign, MSG_PID_I ELABEL, &raw_Ki, 0.01f, 9990, copy_and_scalePID_i_E ## eindex); \ + EDIT_ITEM(float52sign, MSG_PID_D ELABEL, &raw_Kd, 1, 9990, copy_and_scalePID_d_E ## eindex) #if ENABLED(PID_EXTRUSION_SCALING) #define _PID_EDIT_MENU_ITEMS(ELABEL, eindex) \ _PID_BASE_MENU_ITEMS(ELABEL, eindex); \ - MENU_ITEM_EDIT(float3, MSG_PID_C ELABEL, &PID_PARAM(Kc, eindex), 1, 9990) + EDIT_ITEM(float3, MSG_PID_C ELABEL, &PID_PARAM(Kc, eindex), 1, 9990) #else #define _PID_EDIT_MENU_ITEMS(ELABEL, eindex) _PID_BASE_MENU_ITEMS(ELABEL, eindex) #endif @@ -373,7 +373,7 @@ void menu_backlash(); #if ENABLED(PID_AUTOTUNE_MENU) #define PID_EDIT_MENU_ITEMS(ELABEL, eindex) \ _PID_EDIT_MENU_ITEMS(ELABEL, eindex); \ - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_PID_AUTOTUNE ELABEL, &autotune_temp[eindex], 150, heater_maxtemp[eindex] - 15, lcd_autotune_callback_E ## eindex) + EDIT_ITEM_FAST(int3, MSG_PID_AUTOTUNE ELABEL, &autotune_temp[eindex], 150, heater_maxtemp[eindex] - 15, lcd_autotune_callback_E ## eindex) #else #define PID_EDIT_MENU_ITEMS(ELABEL, eindex) _PID_EDIT_MENU_ITEMS(ELABEL, eindex) #endif @@ -450,7 +450,7 @@ void menu_backlash(); // M203 / M205 Velocity options void menu_advanced_velocity() { START_MENU(); - MENU_BACK(MSG_ADVANCED_SETTINGS); + BACK_ITEM(MSG_ADVANCED_SETTINGS); // M203 Max Feedrate constexpr xyze_feedrate_t max_fr_edit = @@ -467,14 +467,14 @@ void menu_backlash(); #else const xyze_feedrate_t &max_fr_edit_scaled = max_fr_edit; #endif - #define EDIT_VMAX(N) MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_VMAX MSG_##N, &planner.settings.max_feedrate_mm_s[_AXIS(N)], 1, max_fr_edit_scaled[_AXIS(N)]) + #define EDIT_VMAX(N) EDIT_ITEM_FAST(float3, MSG_VMAX MSG_##N, &planner.settings.max_feedrate_mm_s[_AXIS(N)], 1, max_fr_edit_scaled[_AXIS(N)]) EDIT_VMAX(A); EDIT_VMAX(B); EDIT_VMAX(C); #if ENABLED(DISTINCT_E_FACTORS) - #define EDIT_VMAX_E(N) MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_VMAX MSG_E##N, &planner.settings.max_feedrate_mm_s[E_AXIS_N(N-1)], 1, max_fr_edit_scaled.e) - MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_VMAX MSG_E, &planner.settings.max_feedrate_mm_s[E_AXIS_N(active_extruder)], 1, max_fr_edit_scaled.e); + #define EDIT_VMAX_E(N) EDIT_ITEM_FAST(float3, MSG_VMAX MSG_E##N, &planner.settings.max_feedrate_mm_s[E_AXIS_N(N-1)], 1, max_fr_edit_scaled.e) + EDIT_ITEM_FAST(float3, MSG_VMAX MSG_E, &planner.settings.max_feedrate_mm_s[E_AXIS_N(active_extruder)], 1, max_fr_edit_scaled.e); EDIT_VMAX_E(1); EDIT_VMAX_E(2); #if E_STEPPERS > 2 @@ -490,14 +490,14 @@ void menu_backlash(); #endif // E_STEPPERS > 3 #endif // E_STEPPERS > 2 #elif E_STEPPERS - MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_VMAX MSG_E, &planner.settings.max_feedrate_mm_s[E_AXIS], 1, max_fr_edit_scaled.e); + EDIT_ITEM_FAST(float3, MSG_VMAX MSG_E, &planner.settings.max_feedrate_mm_s[E_AXIS], 1, max_fr_edit_scaled.e); #endif // M205 S Min Feedrate - MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_VMIN, &planner.settings.min_feedrate_mm_s, 0, 999); + EDIT_ITEM_FAST(float3, MSG_VMIN, &planner.settings.min_feedrate_mm_s, 0, 999); // M205 T Min Travel Feedrate - MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_VTRAV_MIN, &planner.settings.min_travel_feedrate_mm_s, 0, 999); + EDIT_ITEM_FAST(float3, MSG_VTRAV_MIN, &planner.settings.min_travel_feedrate_mm_s, 0, 999); END_MENU(); } @@ -505,17 +505,17 @@ void menu_backlash(); // M201 / M204 Accelerations void menu_advanced_acceleration() { START_MENU(); - MENU_BACK(MSG_ADVANCED_SETTINGS); + BACK_ITEM(MSG_ADVANCED_SETTINGS); static float max_accel = _MAX(planner.settings.max_acceleration_mm_per_s2[A_AXIS], planner.settings.max_acceleration_mm_per_s2[B_AXIS], planner.settings.max_acceleration_mm_per_s2[C_AXIS]); // M204 P Acceleration - MENU_MULTIPLIER_ITEM_EDIT(float5_25, MSG_ACC, &planner.settings.acceleration, 25, max_accel); + EDIT_ITEM_FAST(float5_25, MSG_ACC, &planner.settings.acceleration, 25, max_accel); // M204 R Retract Acceleration - MENU_MULTIPLIER_ITEM_EDIT(float5, MSG_A_RETRACT, &planner.settings.retract_acceleration, 100, max_accel); + EDIT_ITEM_FAST(float5, MSG_A_RETRACT, &planner.settings.retract_acceleration, 100, max_accel); // M204 T Travel Acceleration - MENU_MULTIPLIER_ITEM_EDIT(float5_25, MSG_A_TRAVEL, &planner.settings.travel_acceleration, 25, max_accel); + EDIT_ITEM_FAST(float5_25, MSG_A_TRAVEL, &planner.settings.travel_acceleration, 25, max_accel); // M201 settings constexpr xyze_ulong_t max_accel_edit = @@ -533,15 +533,15 @@ void menu_backlash(); const xyze_ulong_t &max_accel_edit_scaled = max_accel_edit; #endif - #define EDIT_AMAX(Q,L) MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(long5_25, MSG_AMAX MSG_##Q, &planner.settings.max_acceleration_mm_per_s2[_AXIS(Q)], L, max_accel_edit_scaled[_AXIS(Q)], _reset_acceleration_rates) + #define EDIT_AMAX(Q,L) EDIT_ITEM_FAST(long5_25, MSG_AMAX MSG_##Q, &planner.settings.max_acceleration_mm_per_s2[_AXIS(Q)], L, max_accel_edit_scaled[_AXIS(Q)], _reset_acceleration_rates) EDIT_AMAX(A,100); EDIT_AMAX(B,100); EDIT_AMAX(C, 10); #if ENABLED(DISTINCT_E_FACTORS) - #define EDIT_AMAX_E(N,E) MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(long5_25, MSG_AMAX MSG_E##N, &planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(E)], 100, max_accel_edit_scaled.e, _reset_e##E##_acceleration_rate) - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(long5_25, MSG_AMAX MSG_E, &planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(active_extruder)], 100, max_accel_edit_scaled.e, _reset_acceleration_rates); + #define EDIT_AMAX_E(N,E) EDIT_ITEM_FAST(long5_25, MSG_AMAX MSG_E##N, &planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(E)], 100, max_accel_edit_scaled.e, _reset_e##E##_acceleration_rate) + EDIT_ITEM_FAST(long5_25, MSG_AMAX MSG_E, &planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(active_extruder)], 100, max_accel_edit_scaled.e, _reset_acceleration_rates); EDIT_AMAX_E(1,0); EDIT_AMAX_E(2,1); #if E_STEPPERS > 2 @@ -557,7 +557,7 @@ void menu_backlash(); #endif // E_STEPPERS > 3 #endif // E_STEPPERS > 2 #elif E_STEPPERS - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(long5_25, MSG_AMAX MSG_E, &planner.settings.max_acceleration_mm_per_s2[E_AXIS], 100, max_accel_edit_scaled.e, _reset_acceleration_rates); + EDIT_ITEM_FAST(long5_25, MSG_AMAX MSG_E, &planner.settings.max_acceleration_mm_per_s2[E_AXIS], 100, max_accel_edit_scaled.e, _reset_acceleration_rates); #endif END_MENU(); @@ -566,13 +566,13 @@ void menu_backlash(); // M205 Jerk void menu_advanced_jerk() { START_MENU(); - MENU_BACK(MSG_ADVANCED_SETTINGS); + BACK_ITEM(MSG_ADVANCED_SETTINGS); #if ENABLED(JUNCTION_DEVIATION) #if ENABLED(LIN_ADVANCE) - MENU_ITEM_EDIT_CALLBACK(float43, MSG_JUNCTION_DEVIATION, &planner.junction_deviation_mm, 0.01f, 0.3f, planner.recalculate_max_e_jerk); + EDIT_ITEM(float43, MSG_JUNCTION_DEVIATION, &planner.junction_deviation_mm, 0.01f, 0.3f, planner.recalculate_max_e_jerk); #else - MENU_ITEM_EDIT(float43, MSG_JUNCTION_DEVIATION, &planner.junction_deviation_mm, 0.01f, 0.3f); + EDIT_ITEM(float43, MSG_JUNCTION_DEVIATION, &planner.junction_deviation_mm, 0.01f, 0.3f); #endif #endif #if HAS_CLASSIC_JERK @@ -585,16 +585,16 @@ void menu_backlash(); { 990, 990, 990, 990 } #endif ; - #define EDIT_JERK(N) MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_V##N##_JERK, &planner.max_jerk[_AXIS(N)], 1, max_jerk_edit[_AXIS(N)]) + #define EDIT_JERK(N) EDIT_ITEM_FAST(float3, MSG_V##N##_JERK, &planner.max_jerk[_AXIS(N)], 1, max_jerk_edit[_AXIS(N)]) EDIT_JERK(A); EDIT_JERK(B); #if ENABLED(DELTA) EDIT_JERK(C); #else - MENU_MULTIPLIER_ITEM_EDIT(float52sign, MSG_VC_JERK, &planner.max_jerk.c, 0.1f, max_jerk_edit.c); + EDIT_ITEM_FAST(float52sign, MSG_VC_JERK, &planner.max_jerk.c, 0.1f, max_jerk_edit.c); #endif #if !BOTH(JUNCTION_DEVIATION, LIN_ADVANCE) - MENU_MULTIPLIER_ITEM_EDIT(float52sign, MSG_VE_JERK, &planner.max_jerk.e, 0.1f, max_jerk_edit.e); + EDIT_ITEM_FAST(float52sign, MSG_VE_JERK, &planner.max_jerk.e, 0.1f, max_jerk_edit.e); #endif #endif @@ -604,16 +604,16 @@ void menu_backlash(); // M92 Steps-per-mm void menu_advanced_steps_per_mm() { START_MENU(); - MENU_BACK(MSG_ADVANCED_SETTINGS); + BACK_ITEM(MSG_ADVANCED_SETTINGS); - #define EDIT_QSTEPS(Q) MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float51, MSG_##Q##STEPS, &planner.settings.axis_steps_per_mm[_AXIS(Q)], 5, 9999, _planner_refresh_positioning) + #define EDIT_QSTEPS(Q) EDIT_ITEM_FAST(float51, MSG_##Q##STEPS, &planner.settings.axis_steps_per_mm[_AXIS(Q)], 5, 9999, _planner_refresh_positioning) EDIT_QSTEPS(A); EDIT_QSTEPS(B); EDIT_QSTEPS(C); #if ENABLED(DISTINCT_E_FACTORS) - #define EDIT_ESTEPS(N,E) MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float51, MSG_E##N##STEPS, &planner.settings.axis_steps_per_mm[E_AXIS_N(E)], 5, 9999, _planner_refresh_e##E##_positioning) - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float51, MSG_ESTEPS, &planner.settings.axis_steps_per_mm[E_AXIS_N(active_extruder)], 5, 9999, _planner_refresh_positioning); + #define EDIT_ESTEPS(N,E) EDIT_ITEM_FAST(float51, MSG_E##N##STEPS, &planner.settings.axis_steps_per_mm[E_AXIS_N(E)], 5, 9999, _planner_refresh_e##E##_positioning) + EDIT_ITEM_FAST(float51, MSG_ESTEPS, &planner.settings.axis_steps_per_mm[E_AXIS_N(active_extruder)], 5, 9999, _planner_refresh_positioning); EDIT_ESTEPS(1,0); EDIT_ESTEPS(2,1); #if E_STEPPERS > 2 @@ -629,7 +629,7 @@ void menu_backlash(); #endif // E_STEPPERS > 3 #endif // E_STEPPERS > 2 #elif E_STEPPERS - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float51, MSG_ESTEPS, &planner.settings.axis_steps_per_mm[E_AXIS], 5, 9999, _planner_refresh_positioning); + EDIT_ITEM_FAST(float51, MSG_ESTEPS, &planner.settings.axis_steps_per_mm[E_AXIS], 5, 9999, _planner_refresh_positioning); #endif END_MENU(); @@ -663,7 +663,7 @@ void menu_advanced_settings() { lcd_runout_distance_mm = runout.runout_distance(); #endif START_MENU(); - MENU_BACK(MSG_CONFIGURATION); + BACK_ITEM(MSG_CONFIGURATION); #if DISABLED(SLIM_LCD_MENUS) @@ -671,50 +671,50 @@ void menu_advanced_settings() { // // Set Home Offsets // - MENU_ITEM(function, MSG_SET_HOME_OFFSETS, _lcd_set_home_offsets); + ACTION_ITEM(MSG_SET_HOME_OFFSETS, _lcd_set_home_offsets); #endif // M203 / M205 - Feedrate items - MENU_ITEM(submenu, MSG_VELOCITY, menu_advanced_velocity); + SUBMENU(MSG_VELOCITY, menu_advanced_velocity); // M201 - Acceleration items - MENU_ITEM(submenu, MSG_ACCELERATION, menu_advanced_acceleration); + SUBMENU(MSG_ACCELERATION, menu_advanced_acceleration); // M205 - Max Jerk - MENU_ITEM(submenu, MSG_JERK, menu_advanced_jerk); + SUBMENU(MSG_JERK, menu_advanced_jerk); if (!printer_busy()) { // M92 - Steps Per mm - MENU_ITEM(submenu, MSG_STEPS_PER_MM, menu_advanced_steps_per_mm); + SUBMENU(MSG_STEPS_PER_MM, menu_advanced_steps_per_mm); } #endif // !SLIM_LCD_MENUS #if ENABLED(BACKLASH_GCODE) - MENU_ITEM(submenu, MSG_BACKLASH, menu_backlash); + SUBMENU(MSG_BACKLASH, menu_backlash); #endif #if ENABLED(DAC_STEPPER_CURRENT) - MENU_ITEM(submenu, MSG_DRIVE_STRENGTH, menu_dac); + SUBMENU(MSG_DRIVE_STRENGTH, menu_dac); #endif #if HAS_MOTOR_CURRENT_PWM - MENU_ITEM(submenu, MSG_DRIVE_STRENGTH, menu_pwm); + SUBMENU(MSG_DRIVE_STRENGTH, menu_pwm); #endif #if HAS_TRINAMIC - MENU_ITEM(submenu, MSG_TMC_DRIVERS, menu_tmc); + SUBMENU(MSG_TMC_DRIVERS, menu_tmc); #endif #if SHOW_MENU_ADVANCED_TEMPERATURE - MENU_ITEM(submenu, MSG_TEMPERATURE, menu_advanced_temperature); + SUBMENU(MSG_TEMPERATURE, menu_advanced_temperature); #endif #if DISABLED(NO_VOLUMETRICS) || ENABLED(ADVANCED_PAUSE_FEATURE) - MENU_ITEM(submenu, MSG_FILAMENT, menu_advanced_filament); + SUBMENU(MSG_FILAMENT, menu_advanced_filament); #elif ENABLED(LIN_ADVANCE) #if EXTRUDERS == 1 - MENU_ITEM_EDIT(float52, MSG_ADVANCE_K, &planner.extruder_advance_K[0], 0, 999); + EDIT_ITEM(float52, MSG_ADVANCE_K, &planner.extruder_advance_K[0], 0, 999); #elif EXTRUDERS > 1 - #define EDIT_ADVANCE_K(N) MENU_ITEM_EDIT(float52, MSG_ADVANCE_K MSG_E##N, &planner.extruder_advance_K[N-1], 0, 999) + #define EDIT_ADVANCE_K(N) EDIT_ITEM(float52, MSG_ADVANCE_K MSG_E##N, &planner.extruder_advance_K[N-1], 0, 999) EDIT_ADVANCE_K(1); EDIT_ADVANCE_K(2); #if EXTRUDERS > 2 @@ -734,12 +734,12 @@ void menu_advanced_settings() { // M540 S - Abort on endstop hit when SD printing #if ENABLED(SD_ABORT_ON_ENDSTOP_HIT) - MENU_ITEM_EDIT(bool, MSG_ENDSTOP_ABORT, &planner.abort_on_endstop_hit); + EDIT_ITEM(bool, MSG_ENDSTOP_ABORT, &planner.abort_on_endstop_hit); #endif #if ENABLED(SD_FIRMWARE_UPDATE) bool sd_update_state = settings.sd_update_status(); - MENU_ITEM_EDIT_CALLBACK(bool, MSG_MEDIA_UPDATE, &sd_update_state, []{ + EDIT_ITEM(bool, MSG_MEDIA_UPDATE, &sd_update_state, []{ // // Toggle the SD Firmware Update state in EEPROM // @@ -754,7 +754,7 @@ void menu_advanced_settings() { #endif #if ENABLED(EEPROM_SETTINGS) && DISABLED(SLIM_LCD_MENUS) - MENU_ITEM(submenu, MSG_INIT_EEPROM, lcd_init_eeprom_confirm); + SUBMENU(MSG_INIT_EEPROM, lcd_init_eeprom_confirm); #endif END_MENU(); diff --git a/Marlin/src/lcd/menu/menu_backlash.cpp b/Marlin/src/lcd/menu/menu_backlash.cpp index 147c593901..30ef29a64e 100644 --- a/Marlin/src/lcd/menu/menu_backlash.cpp +++ b/Marlin/src/lcd/menu/menu_backlash.cpp @@ -34,17 +34,17 @@ void menu_backlash() { START_MENU(); - MENU_BACK(MSG_MAIN); + BACK_ITEM(MSG_MAIN); - MENU_MULTIPLIER_ITEM_EDIT(percent, MSG_BACKLASH_CORRECTION, &backlash.correction, all_off, all_on); + EDIT_ITEM_FAST(percent, MSG_BACKLASH_CORRECTION, &backlash.correction, all_off, all_on); - #define EDIT_BACKLASH_DISTANCE(N) MENU_MULTIPLIER_ITEM_EDIT(float43, MSG_##N, &backlash.distance_mm[_AXIS(N)], 0.0f, 9.9f); + #define EDIT_BACKLASH_DISTANCE(N) EDIT_ITEM_FAST(float43, MSG_##N, &backlash.distance_mm[_AXIS(N)], 0.0f, 9.9f); EDIT_BACKLASH_DISTANCE(A); EDIT_BACKLASH_DISTANCE(B); EDIT_BACKLASH_DISTANCE(C); #ifdef BACKLASH_SMOOTHING_MM - MENU_MULTIPLIER_ITEM_EDIT(float43, MSG_BACKLASH_SMOOTHING, &backlash.smoothing_mm, 0.0f, 9.9f); + EDIT_ITEM_FAST(float43, MSG_BACKLASH_SMOOTHING, &backlash.smoothing_mm, 0.0f, 9.9f); #endif END_MENU(); diff --git a/Marlin/src/lcd/menu/menu_bed_leveling.cpp b/Marlin/src/lcd/menu/menu_bed_leveling.cpp index 3155a3418c..320a25c5e1 100644 --- a/Marlin/src/lcd/menu/menu_bed_leveling.cpp +++ b/Marlin/src/lcd/menu/menu_bed_leveling.cpp @@ -210,10 +210,10 @@ void menu_edit_mesh() { static uint8_t xind, yind; // =0 START_MENU(); - MENU_BACK(MSG_BED_LEVELING); - MENU_ITEM_EDIT(uint8, MSG_MESH_X, &xind, 0, GRID_MAX_POINTS_X - 1); - MENU_ITEM_EDIT(uint8, MSG_MESH_Y, &yind, 0, GRID_MAX_POINTS_Y - 1); - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_MESH_EDIT_Z, &Z_VALUES(xind, yind), -(LCD_PROBE_Z_RANGE) * 0.5, (LCD_PROBE_Z_RANGE) * 0.5, refresh_planner); + BACK_ITEM(MSG_BED_LEVELING); + EDIT_ITEM(uint8, MSG_MESH_X, &xind, 0, GRID_MAX_POINTS_X - 1); + EDIT_ITEM(uint8, MSG_MESH_Y, &yind, 0, GRID_MAX_POINTS_Y - 1); + EDIT_ITEM_FAST(float43, MSG_MESH_EDIT_Z, &Z_VALUES(xind, yind), -(LCD_PROBE_Z_RANGE) * 0.5, (LCD_PROBE_Z_RANGE) * 0.5, refresh_planner); END_MENU(); } @@ -235,60 +235,60 @@ */ void menu_bed_leveling() { START_MENU(); - MENU_BACK(MSG_MOTION); + BACK_ITEM(MSG_MOTION); const bool is_homed = all_axes_known(); // Auto Home if not using manual probing #if NONE(PROBE_MANUALLY, MESH_BED_LEVELING) - if (!is_homed) MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28")); + if (!is_homed) GCODES_ITEM(MSG_AUTO_HOME, PSTR("G28")); #endif // Level Bed #if EITHER(PROBE_MANUALLY, MESH_BED_LEVELING) // Manual leveling uses a guided procedure - MENU_ITEM(submenu, MSG_LEVEL_BED, _lcd_level_bed_continue); + SUBMENU(MSG_LEVEL_BED, _lcd_level_bed_continue); #else // Automatic leveling can just run the G-code - MENU_ITEM(gcode, MSG_LEVEL_BED, is_homed ? PSTR("G29") : PSTR("G28\nG29")); + GCODES_ITEM(MSG_LEVEL_BED, is_homed ? PSTR("G29") : PSTR("G28\nG29")); #endif #if ENABLED(MESH_EDIT_MENU) if (leveling_is_valid()) - MENU_ITEM(submenu, MSG_EDIT_MESH, menu_edit_mesh); + SUBMENU(MSG_EDIT_MESH, menu_edit_mesh); #endif // Homed and leveling is valid? Then leveling can be toggled. if (is_homed && leveling_is_valid()) { bool new_level_state = planner.leveling_active; - MENU_ITEM_EDIT_CALLBACK(bool, MSG_BED_LEVELING, &new_level_state, _lcd_toggle_bed_leveling); + EDIT_ITEM(bool, MSG_BED_LEVELING, &new_level_state, _lcd_toggle_bed_leveling); } // Z Fade Height #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float3, MSG_Z_FADE_HEIGHT, &lcd_z_fade_height, 0, 100, _lcd_set_z_fade_height); + EDIT_ITEM_FAST(float3, MSG_Z_FADE_HEIGHT, &lcd_z_fade_height, 0, 100, _lcd_set_z_fade_height); #endif // // Mesh Bed Leveling Z-Offset // #if ENABLED(MESH_BED_LEVELING) - MENU_ITEM_EDIT(float43, MSG_BED_Z, &mbl.z_offset, -1, 1); + EDIT_ITEM(float43, MSG_BED_Z, &mbl.z_offset, -1, 1); #endif #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - MENU_ITEM(submenu, MSG_ZPROBE_ZOFFSET, lcd_babystep_zoffset); + SUBMENU(MSG_ZPROBE_ZOFFSET, lcd_babystep_zoffset); #elif HAS_BED_PROBE - MENU_ITEM_EDIT(float52, MSG_ZPROBE_ZOFFSET, &probe_offset.z, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX); + EDIT_ITEM(float52, MSG_ZPROBE_ZOFFSET, &probe_offset.z, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX); #endif #if ENABLED(LEVEL_BED_CORNERS) - MENU_ITEM(submenu, MSG_LEVEL_CORNERS, _lcd_level_bed_corners); + SUBMENU(MSG_LEVEL_CORNERS, _lcd_level_bed_corners); #endif #if ENABLED(EEPROM_SETTINGS) - MENU_ITEM(function, MSG_LOAD_EEPROM, lcd_load_settings); - MENU_ITEM(function, MSG_STORE_EEPROM, lcd_store_settings); + ACTION_ITEM(MSG_LOAD_EEPROM, lcd_load_settings); + ACTION_ITEM(MSG_STORE_EEPROM, lcd_store_settings); #endif END_MENU(); } diff --git a/Marlin/src/lcd/menu/menu_configuration.cpp b/Marlin/src/lcd/menu/menu_configuration.cpp index 596ab682dc..f998f32b17 100644 --- a/Marlin/src/lcd/menu/menu_configuration.cpp +++ b/Marlin/src/lcd/menu/menu_configuration.cpp @@ -92,10 +92,10 @@ static void lcd_factory_settings() { void menu_debug() { START_MENU(); - MENU_BACK(MSG_CONFIGURATION); + BACK_ITEM(MSG_CONFIGURATION); #if ENABLED(LCD_PROGRESS_BAR_TEST) - MENU_ITEM(submenu, MSG_PROGRESS_BAR_TEST, _progress_bar_test); + SUBMENU(MSG_PROGRESS_BAR_TEST, _progress_bar_test); #endif END_MENU(); @@ -109,7 +109,7 @@ static void lcd_factory_settings() { void menu_tool_change() { START_MENU(); - MENU_BACK(MSG_CONFIGURATION); + BACK_ITEM(MSG_CONFIGURATION); #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) static constexpr float max_extrude = #if ENABLED(PREVENT_LENGTHY_EXTRUDE) @@ -118,12 +118,12 @@ static void lcd_factory_settings() { 500 #endif ; - MENU_ITEM_EDIT(float3, MSG_FILAMENT_SWAP_LENGTH, &toolchange_settings.swap_length, 0, max_extrude); - MENU_ITEM_EDIT(float3, MSG_FILAMENT_PURGE_LENGTH, &toolchange_settings.extra_prime, 0, max_extrude); - MENU_MULTIPLIER_ITEM_EDIT(int4, MSG_SINGLENOZZLE_RETRACT_SPD, &toolchange_settings.retract_speed, 10, 5400); - MENU_MULTIPLIER_ITEM_EDIT(int4, MSG_SINGLENOZZLE_PRIME_SPD, &toolchange_settings.prime_speed, 10, 5400); + EDIT_ITEM(float3, MSG_FILAMENT_SWAP_LENGTH, &toolchange_settings.swap_length, 0, max_extrude); + EDIT_ITEM(float3, MSG_FILAMENT_PURGE_LENGTH, &toolchange_settings.extra_prime, 0, max_extrude); + EDIT_ITEM_FAST(int4, MSG_SINGLENOZZLE_RETRACT_SPD, &toolchange_settings.retract_speed, 10, 5400); + EDIT_ITEM_FAST(int4, MSG_SINGLENOZZLE_PRIME_SPD, &toolchange_settings.prime_speed, 10, 5400); #endif - MENU_ITEM_EDIT(float3, MSG_TOOL_CHANGE_ZLIFT, &toolchange_settings.z_raise, 0, 10); + EDIT_ITEM(float3, MSG_TOOL_CHANGE_ZLIFT, &toolchange_settings.z_raise, 0, 10); END_MENU(); } @@ -143,16 +143,16 @@ static void lcd_factory_settings() { }; START_MENU(); - MENU_BACK(MSG_CONFIGURATION); + BACK_ITEM(MSG_CONFIGURATION); #if ENABLED(DUAL_X_CARRIAGE) - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float51, MSG_X_OFFSET, &hotend_offset[1].x, float(X2_HOME_POS - 25), float(X2_HOME_POS + 25), _recalc_offsets); + EDIT_ITEM_FAST(float51, MSG_X_OFFSET, &hotend_offset[1].x, float(X2_HOME_POS - 25), float(X2_HOME_POS + 25), _recalc_offsets); #else - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float52sign, MSG_X_OFFSET, &hotend_offset[1].x, -99.0, 99.0, _recalc_offsets); + EDIT_ITEM_FAST(float52sign, MSG_X_OFFSET, &hotend_offset[1].x, -99.0, 99.0, _recalc_offsets); #endif - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float52sign, MSG_Y_OFFSET, &hotend_offset[1].y, -99.0, 99.0, _recalc_offsets); - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float52sign, MSG_Z_OFFSET, &hotend_offset[1].z, Z_PROBE_LOW_POINT, 10.0, _recalc_offsets); + EDIT_ITEM_FAST(float52sign, MSG_Y_OFFSET, &hotend_offset[1].y, -99.0, 99.0, _recalc_offsets); + EDIT_ITEM_FAST(float52sign, MSG_Z_OFFSET, &hotend_offset[1].z, Z_PROBE_LOW_POINT, 10.0, _recalc_offsets); #if ENABLED(EEPROM_SETTINGS) - MENU_ITEM(function, MSG_STORE_EEPROM, lcd_store_settings); + ACTION_ITEM(MSG_STORE_EEPROM, lcd_store_settings); #endif END_MENU(); } @@ -162,19 +162,21 @@ static void lcd_factory_settings() { void menu_idex() { START_MENU(); - MENU_BACK(MSG_CONFIGURATION); + BACK_ITEM(MSG_CONFIGURATION); - MENU_ITEM(gcode, MSG_IDEX_MODE_AUTOPARK, PSTR("M605 S1\nG28 X\nG1 X100")); + GCODES_ITEM(MSG_IDEX_MODE_AUTOPARK, PSTR("M605 S1\nG28 X\nG1 X100")); const bool need_g28 = !(TEST(axis_known_position, Y_AXIS) && TEST(axis_known_position, Z_AXIS)); - MENU_ITEM(gcode, MSG_IDEX_MODE_DUPLICATE, need_g28 + + GCODES_ITEM(MSG_IDEX_MODE_DUPLICATE, need_g28 ? PSTR("M605 S1\nT0\nG28\nM605 S2 X200\nG28 X\nG1 X100") // If Y or Z is not homed, do a full G28 first : PSTR("M605 S1\nT0\nM605 S2 X200\nG28 X\nG1 X100") ); - MENU_ITEM(gcode, MSG_IDEX_MODE_MIRRORED_COPY, need_g28 + + GCODES_ITEM(MSG_IDEX_MODE_MIRRORED_COPY, need_g28 ? PSTR("M605 S1\nT0\nG28\nM605 S2 X200\nG28 X\nG1 X100\nM605 S3 X200") // If Y or Z is not homed, do a full G28 first : PSTR("M605 S1\nT0\nM605 S2 X200\nG28 X\nG1 X100\nM605 S3 X200") ); - MENU_ITEM(gcode, MSG_IDEX_MODE_FULL_CTRL, PSTR("M605 S0\nG28 X")); + GCODES_ITEM(MSG_IDEX_MODE_FULL_CTRL, PSTR("M605 S0\nG28 X")); END_MENU(); } @@ -202,27 +204,27 @@ static void lcd_factory_settings() { void menu_bltouch() { START_MENU(); - MENU_BACK(MSG_CONFIGURATION); - MENU_ITEM(function, MSG_BLTOUCH_RESET, bltouch._reset); - MENU_ITEM(function, MSG_BLTOUCH_SELFTEST, bltouch._selftest); - MENU_ITEM(function, MSG_BLTOUCH_DEPLOY, bltouch._deploy); - MENU_ITEM(function, MSG_BLTOUCH_STOW, bltouch._stow); - MENU_ITEM(function, MSG_BLTOUCH_SW_MODE, bltouch._set_SW_mode); + BACK_ITEM(MSG_CONFIGURATION); + ACTION_ITEM(MSG_BLTOUCH_RESET, bltouch._reset); + ACTION_ITEM(MSG_BLTOUCH_SELFTEST, bltouch._selftest); + ACTION_ITEM(MSG_BLTOUCH_DEPLOY, bltouch._deploy); + ACTION_ITEM(MSG_BLTOUCH_STOW, bltouch._stow); + ACTION_ITEM(MSG_BLTOUCH_SW_MODE, bltouch._set_SW_mode); #if ENABLED(BLTOUCH_LCD_VOLTAGE_MENU) - MENU_ITEM(submenu, MSG_BLTOUCH_5V_MODE, []{ + SUBMENU(MSG_BLTOUCH_5V_MODE, []{ do_select_screen(PSTR(MSG_BLTOUCH_5V_MODE), PSTR(MSG_BUTTON_CANCEL), bltouch._set_5V_mode, ui.goto_previous_screen, PSTR(MSG_BLTOUCH_MODE_CHANGE)); }); - MENU_ITEM(submenu, MSG_BLTOUCH_OD_MODE, []{ + SUBMENU(MSG_BLTOUCH_OD_MODE, []{ do_select_screen(PSTR(MSG_BLTOUCH_OD_MODE), PSTR(MSG_BUTTON_CANCEL), bltouch._set_OD_mode, ui.goto_previous_screen, PSTR(MSG_BLTOUCH_MODE_CHANGE)); }); - MENU_ITEM(function, MSG_BLTOUCH_MODE_STORE, bltouch._mode_store); - MENU_ITEM(submenu, MSG_BLTOUCH_MODE_STORE_5V, []{ + ACTION_ITEM(MSG_BLTOUCH_MODE_STORE, bltouch._mode_store); + SUBMENU(MSG_BLTOUCH_MODE_STORE_5V, []{ do_select_screen(PSTR(MSG_BLTOUCH_MODE_STORE_5V), PSTR(MSG_BUTTON_CANCEL), bltouch.mode_conv_5V, ui.goto_previous_screen, PSTR(MSG_BLTOUCH_MODE_CHANGE)); }); - MENU_ITEM(submenu, MSG_BLTOUCH_MODE_STORE_OD, []{ + SUBMENU(MSG_BLTOUCH_MODE_STORE_OD, []{ do_select_screen(PSTR(MSG_BLTOUCH_MODE_STORE_OD), PSTR(MSG_BUTTON_CANCEL), bltouch.mode_conv_OD, ui.goto_previous_screen, PSTR(MSG_BLTOUCH_MODE_CHANGE)); }); - MENU_ITEM(function, MSG_BLTOUCH_MODE_ECHO, bltouch_report); + ACTION_ITEM(MSG_BLTOUCH_MODE_ECHO, bltouch_report); #endif END_MENU(); } @@ -233,11 +235,11 @@ static void lcd_factory_settings() { void menu_touchmi() { START_MENU(); ui.defer_status_screen(); - MENU_BACK(MSG_CONFIGURATION); - MENU_ITEM(gcode, MSG_TOUCHMI_INIT, PSTR("M851 Z0\nG28\nG1 F200 Z0")); - MENU_ITEM(submenu, MSG_ZPROBE_ZOFFSET, lcd_babystep_zoffset); - MENU_ITEM(gcode, MSG_TOUCHMI_SAVE, PSTR("M500\nG1 F200 Z10")); - MENU_ITEM(gcode, MSG_TOUCHMI_ZTEST, PSTR("G28\nG1 F200 Z0")); + BACK_ITEM(MSG_CONFIGURATION); + GCODES_ITEM(MSG_TOUCHMI_INIT, PSTR("M851 Z0\nG28\nG1 F200 Z0")); + SUBMENU(MSG_ZPROBE_ZOFFSET, lcd_babystep_zoffset); + GCODES_ITEM(MSG_TOUCHMI_SAVE, PSTR("M500\nG1 F200 Z10")); + GCODES_ITEM(MSG_TOUCHMI_ZTEST, PSTR("G28\nG1 F200 Z0")); END_MENU(); } #endif @@ -250,9 +252,9 @@ static void lcd_factory_settings() { void menu_case_light() { START_MENU(); - MENU_BACK(MSG_CONFIGURATION); - MENU_ITEM_EDIT_CALLBACK(uint8, MSG_CASE_LIGHT_BRIGHTNESS, &case_light_brightness, 0, 255, update_case_light, true); - MENU_ITEM_EDIT_CALLBACK(bool, MSG_CASE_LIGHT, (bool*)&case_light_on, update_case_light); + BACK_ITEM(MSG_CONFIGURATION); + EDIT_ITEM(uint8, MSG_CASE_LIGHT_BRIGHTNESS, &case_light_brightness, 0, 255, update_case_light, true); + EDIT_ITEM(bool, MSG_CASE_LIGHT, (bool*)&case_light_on, update_case_light); END_MENU(); } @@ -266,23 +268,23 @@ static void lcd_factory_settings() { void menu_config_retract() { START_MENU(); - MENU_BACK(MSG_CONFIGURATION); + BACK_ITEM(MSG_CONFIGURATION); #if ENABLED(FWRETRACT_AUTORETRACT) - MENU_ITEM_EDIT_CALLBACK(bool, MSG_AUTORETRACT, &fwretract.autoretract_enabled, fwretract.refresh_autoretract); + EDIT_ITEM(bool, MSG_AUTORETRACT, &fwretract.autoretract_enabled, fwretract.refresh_autoretract); #endif - MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT, &fwretract.settings.retract_length, 0, 100); + EDIT_ITEM(float52sign, MSG_CONTROL_RETRACT, &fwretract.settings.retract_length, 0, 100); #if EXTRUDERS > 1 - MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT_SWAP, &fwretract.settings.swap_retract_length, 0, 100); + EDIT_ITEM(float52sign, MSG_CONTROL_RETRACT_SWAP, &fwretract.settings.swap_retract_length, 0, 100); #endif - MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACTF, &fwretract.settings.retract_feedrate_mm_s, 1, 999); - MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT_ZHOP, &fwretract.settings.retract_zraise, 0, 999); - MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT_RECOVER, &fwretract.settings.retract_recover_extra, -100, 100); + EDIT_ITEM(float3, MSG_CONTROL_RETRACTF, &fwretract.settings.retract_feedrate_mm_s, 1, 999); + EDIT_ITEM(float52sign, MSG_CONTROL_RETRACT_ZHOP, &fwretract.settings.retract_zraise, 0, 999); + EDIT_ITEM(float52sign, MSG_CONTROL_RETRACT_RECOVER, &fwretract.settings.retract_recover_extra, -100, 100); #if EXTRUDERS > 1 - MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT_RECOVER_SWAP, &fwretract.settings.swap_retract_recover_extra, -100, 100); + EDIT_ITEM(float52sign, MSG_CONTROL_RETRACT_RECOVER_SWAP, &fwretract.settings.swap_retract_recover_extra, -100, 100); #endif - MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACT_RECOVERF, &fwretract.settings.retract_recover_feedrate_mm_s, 1, 999); + EDIT_ITEM(float3, MSG_CONTROL_RETRACT_RECOVERF, &fwretract.settings.retract_recover_feedrate_mm_s, 1, 999); #if EXTRUDERS > 1 - MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACT_RECOVER_SWAPF, &fwretract.settings.swap_retract_recover_feedrate_mm_s, 1, 999); + EDIT_ITEM(float3, MSG_CONTROL_RETRACT_RECOVER_SWAPF, &fwretract.settings.swap_retract_recover_feedrate_mm_s, 1, 999); #endif END_MENU(); } @@ -312,16 +314,16 @@ static void lcd_factory_settings() { #define MAXTEMP_ALL HEATER_0_MAXTEMP #endif START_MENU(); - MENU_BACK(MSG_CONFIGURATION); - MENU_ITEM_EDIT(percent, MSG_FAN_SPEED, &ui.preheat_fan_speed[material], 0, 255); + BACK_ITEM(MSG_CONFIGURATION); + EDIT_ITEM(percent, MSG_FAN_SPEED, &ui.preheat_fan_speed[material], 0, 255); #if HAS_TEMP_HOTEND - MENU_ITEM_EDIT(int3, MSG_NOZZLE, &ui.preheat_hotend_temp[material], MINTEMP_ALL, MAXTEMP_ALL - 15); + EDIT_ITEM(int3, MSG_NOZZLE, &ui.preheat_hotend_temp[material], MINTEMP_ALL, MAXTEMP_ALL - 15); #endif #if HAS_HEATED_BED - MENU_ITEM_EDIT(int3, MSG_BED, &ui.preheat_bed_temp[material], BED_MINTEMP, BED_MAXTEMP - 10); + EDIT_ITEM(int3, MSG_BED, &ui.preheat_bed_temp[material], BED_MINTEMP, BED_MAXTEMP - 10); #endif #if ENABLED(EEPROM_SETTINGS) - MENU_ITEM(function, MSG_STORE_EEPROM, lcd_store_settings); + ACTION_ITEM(MSG_STORE_EEPROM, lcd_store_settings); #endif END_MENU(); } @@ -333,21 +335,21 @@ static void lcd_factory_settings() { void menu_configuration() { START_MENU(); - MENU_BACK(MSG_MAIN); + BACK_ITEM(MSG_MAIN); // // Debug Menu when certain options are enabled // #if HAS_DEBUG_MENU - MENU_ITEM(submenu, MSG_DEBUG_MENU, menu_debug); + SUBMENU(MSG_DEBUG_MENU, menu_debug); #endif - MENU_ITEM(submenu, MSG_ADVANCED_SETTINGS, menu_advanced_settings); + SUBMENU(MSG_ADVANCED_SETTINGS, menu_advanced_settings); #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - MENU_ITEM(submenu, MSG_ZPROBE_ZOFFSET, lcd_babystep_zoffset); + SUBMENU(MSG_ZPROBE_ZOFFSET, lcd_babystep_zoffset); #elif HAS_BED_PROBE - MENU_ITEM_EDIT(float52, MSG_ZPROBE_ZOFFSET, &probe_offset.z, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX); + EDIT_ITEM(float52, MSG_ZPROBE_ZOFFSET, &probe_offset.z, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX); #endif const bool busy = printer_busy(); @@ -356,23 +358,23 @@ void menu_configuration() { // Delta Calibration // #if EITHER(DELTA_CALIBRATION_MENU, DELTA_AUTO_CALIBRATION) - MENU_ITEM(submenu, MSG_DELTA_CALIBRATE, menu_delta_calibrate); + SUBMENU(MSG_DELTA_CALIBRATE, menu_delta_calibrate); #endif #if HAS_HOTEND_OFFSET - MENU_ITEM(submenu, MSG_OFFSETS_MENU, menu_tool_offsets); + SUBMENU(MSG_OFFSETS_MENU, menu_tool_offsets); #endif #if ENABLED(DUAL_X_CARRIAGE) - MENU_ITEM(submenu, MSG_IDEX_MENU, menu_idex); + SUBMENU(MSG_IDEX_MENU, menu_idex); #endif #if ENABLED(BLTOUCH) - MENU_ITEM(submenu, MSG_BLTOUCH, menu_bltouch); + SUBMENU(MSG_BLTOUCH, menu_bltouch); #endif #if ENABLED(TOUCH_MI_PROBE) - MENU_ITEM(submenu, MSG_TOUCHMI_PROBE, menu_touchmi); + SUBMENU(MSG_TOUCHMI_PROBE, menu_touchmi); #endif } @@ -380,7 +382,7 @@ void menu_configuration() { // Set single nozzle filament retract and prime length // #if EXTRUDERS > 1 - MENU_ITEM(submenu, MSG_TOOL_CHANGE, menu_tool_change); + SUBMENU(MSG_TOOL_CHANGE, menu_tool_change); #endif // @@ -389,41 +391,41 @@ void menu_configuration() { #if ENABLED(CASE_LIGHT_MENU) #if DISABLED(CASE_LIGHT_NO_BRIGHTNESS) if (PWM_PIN(CASE_LIGHT_PIN)) - MENU_ITEM(submenu, MSG_CASE_LIGHT, menu_case_light); + SUBMENU(MSG_CASE_LIGHT, menu_case_light); else #endif - MENU_ITEM_EDIT_CALLBACK(bool, MSG_CASE_LIGHT, (bool*)&case_light_on, update_case_light); + EDIT_ITEM(bool, MSG_CASE_LIGHT, (bool*)&case_light_on, update_case_light); #endif #if HAS_LCD_CONTRAST - MENU_ITEM_EDIT_CALLBACK(int3, MSG_CONTRAST, &ui.contrast, LCD_CONTRAST_MIN, LCD_CONTRAST_MAX, ui.refresh_contrast, true); + EDIT_ITEM(int3, MSG_CONTRAST, &ui.contrast, LCD_CONTRAST_MIN, LCD_CONTRAST_MAX, ui.refresh_contrast, true); #endif #if ENABLED(FWRETRACT) - MENU_ITEM(submenu, MSG_RETRACT, menu_config_retract); + SUBMENU(MSG_RETRACT, menu_config_retract); #endif #if HAS_FILAMENT_SENSOR - MENU_ITEM_EDIT_CALLBACK(bool, MSG_RUNOUT_SENSOR, &runout.enabled, runout.reset); + EDIT_ITEM(bool, MSG_RUNOUT_SENSOR, &runout.enabled, runout.reset); #endif #if ENABLED(POWER_LOSS_RECOVERY) - MENU_ITEM_EDIT_CALLBACK(bool, MSG_OUTAGE_RECOVERY, &recovery.enabled, recovery.changed); + EDIT_ITEM(bool, MSG_OUTAGE_RECOVERY, &recovery.enabled, recovery.changed); #endif #if DISABLED(SLIM_LCD_MENUS) // Preheat configurations - MENU_ITEM(submenu, MSG_PREHEAT_1_SETTINGS, menu_preheat_material1_settings); - MENU_ITEM(submenu, MSG_PREHEAT_2_SETTINGS, menu_preheat_material2_settings); + SUBMENU(MSG_PREHEAT_1_SETTINGS, menu_preheat_material1_settings); + SUBMENU(MSG_PREHEAT_2_SETTINGS, menu_preheat_material2_settings); #endif #if ENABLED(EEPROM_SETTINGS) - MENU_ITEM(function, MSG_STORE_EEPROM, lcd_store_settings); + ACTION_ITEM(MSG_STORE_EEPROM, lcd_store_settings); if (!busy) - MENU_ITEM(function, MSG_LOAD_EEPROM, lcd_load_settings); + ACTION_ITEM(MSG_LOAD_EEPROM, lcd_load_settings); #endif if (!busy) - MENU_ITEM(function, MSG_RESTORE_FAILSAFE, lcd_factory_settings); + ACTION_ITEM(MSG_RESTORE_FAILSAFE, lcd_factory_settings); END_MENU(); } diff --git a/Marlin/src/lcd/menu/menu_custom.cpp b/Marlin/src/lcd/menu/menu_custom.cpp index ad346e71df..aa869419c9 100644 --- a/Marlin/src/lcd/menu/menu_custom.cpp +++ b/Marlin/src/lcd/menu/menu_custom.cpp @@ -65,21 +65,21 @@ void _lcd_user_gcode(PGM_P const cmd) { void menu_user() { START_MENU(); - MENU_BACK(MSG_MAIN); + BACK_ITEM(MSG_MAIN); #if defined(USER_DESC_1) && defined(USER_GCODE_1) - MENU_ITEM(function, USER_DESC_1, lcd_user_gcode_1); + ACTION_ITEM(USER_DESC_1, lcd_user_gcode_1); #endif #if defined(USER_DESC_2) && defined(USER_GCODE_2) - MENU_ITEM(function, USER_DESC_2, lcd_user_gcode_2); + ACTION_ITEM(USER_DESC_2, lcd_user_gcode_2); #endif #if defined(USER_DESC_3) && defined(USER_GCODE_3) - MENU_ITEM(function, USER_DESC_3, lcd_user_gcode_3); + ACTION_ITEM(USER_DESC_3, lcd_user_gcode_3); #endif #if defined(USER_DESC_4) && defined(USER_GCODE_4) - MENU_ITEM(function, USER_DESC_4, lcd_user_gcode_4); + ACTION_ITEM(USER_DESC_4, lcd_user_gcode_4); #endif #if defined(USER_DESC_5) && defined(USER_GCODE_5) - MENU_ITEM(function, USER_DESC_5, lcd_user_gcode_5); + ACTION_ITEM(USER_DESC_5, lcd_user_gcode_5); #endif END_MENU(); } diff --git a/Marlin/src/lcd/menu/menu_delta_calibrate.cpp b/Marlin/src/lcd/menu/menu_delta_calibrate.cpp index b42c9a9a76..02e3c3b044 100644 --- a/Marlin/src/lcd/menu/menu_delta_calibrate.cpp +++ b/Marlin/src/lcd/menu/menu_delta_calibrate.cpp @@ -103,42 +103,42 @@ void _recalc_delta_settings() { void lcd_delta_settings() { START_MENU(); - MENU_BACK(MSG_DELTA_CALIBRATE); - MENU_ITEM_EDIT_CALLBACK(float52sign, MSG_DELTA_HEIGHT, &delta_height, delta_height - 10, delta_height + 10, _recalc_delta_settings); - #define EDIT_ENDSTOP_ADJ(LABEL,N) MENU_ITEM_EDIT_CALLBACK(float43, LABEL, &delta_endstop_adj.N, -5, 5, _recalc_delta_settings) + BACK_ITEM(MSG_DELTA_CALIBRATE); + EDIT_ITEM(float52sign, MSG_DELTA_HEIGHT, &delta_height, delta_height - 10, delta_height + 10, _recalc_delta_settings); + #define EDIT_ENDSTOP_ADJ(LABEL,N) EDIT_ITEM(float43, LABEL, &delta_endstop_adj.N, -5, 5, _recalc_delta_settings) EDIT_ENDSTOP_ADJ("Ex",a); EDIT_ENDSTOP_ADJ("Ey",b); EDIT_ENDSTOP_ADJ("Ez",c); - MENU_ITEM_EDIT_CALLBACK(float52sign, MSG_DELTA_RADIUS, &delta_radius, delta_radius - 5, delta_radius + 5, _recalc_delta_settings); - #define EDIT_ANGLE_TRIM(LABEL,N) MENU_ITEM_EDIT_CALLBACK(float43, LABEL, &delta_tower_angle_trim.N, -5, 5, _recalc_delta_settings) + EDIT_ITEM(float52sign, MSG_DELTA_RADIUS, &delta_radius, delta_radius - 5, delta_radius + 5, _recalc_delta_settings); + #define EDIT_ANGLE_TRIM(LABEL,N) EDIT_ITEM(float43, LABEL, &delta_tower_angle_trim.N, -5, 5, _recalc_delta_settings) EDIT_ANGLE_TRIM("Tx",a); EDIT_ANGLE_TRIM("Ty",b); EDIT_ANGLE_TRIM("Tz",c); - MENU_ITEM_EDIT_CALLBACK(float52sign, MSG_DELTA_DIAG_ROD, &delta_diagonal_rod, delta_diagonal_rod - 5, delta_diagonal_rod + 5, _recalc_delta_settings); + EDIT_ITEM(float52sign, MSG_DELTA_DIAG_ROD, &delta_diagonal_rod, delta_diagonal_rod - 5, delta_diagonal_rod + 5, _recalc_delta_settings); END_MENU(); } void menu_delta_calibrate() { START_MENU(); - MENU_BACK(MSG_MAIN); + BACK_ITEM(MSG_MAIN); #if ENABLED(DELTA_AUTO_CALIBRATION) - MENU_ITEM(gcode, MSG_DELTA_AUTO_CALIBRATE, PSTR("G33")); + GCODES_ITEM(MSG_DELTA_AUTO_CALIBRATE, PSTR("G33")); #if ENABLED(EEPROM_SETTINGS) - MENU_ITEM(function, MSG_STORE_EEPROM, lcd_store_settings); - MENU_ITEM(function, MSG_LOAD_EEPROM, lcd_load_settings); + ACTION_ITEM(MSG_STORE_EEPROM, lcd_store_settings); + ACTION_ITEM(MSG_LOAD_EEPROM, lcd_load_settings); #endif #endif - MENU_ITEM(submenu, MSG_DELTA_SETTINGS, lcd_delta_settings); + SUBMENU(MSG_DELTA_SETTINGS, lcd_delta_settings); #if ENABLED(DELTA_CALIBRATION_MENU) - MENU_ITEM(submenu, MSG_AUTO_HOME, _lcd_delta_calibrate_home); + SUBMENU(MSG_AUTO_HOME, _lcd_delta_calibrate_home); if (all_axes_homed()) { - MENU_ITEM(submenu, MSG_DELTA_CALIBRATE_X, _goto_tower_x); - MENU_ITEM(submenu, MSG_DELTA_CALIBRATE_Y, _goto_tower_y); - MENU_ITEM(submenu, MSG_DELTA_CALIBRATE_Z, _goto_tower_z); - MENU_ITEM(submenu, MSG_DELTA_CALIBRATE_CENTER, _goto_center); + SUBMENU(MSG_DELTA_CALIBRATE_X, _goto_tower_x); + SUBMENU(MSG_DELTA_CALIBRATE_Y, _goto_tower_y); + SUBMENU(MSG_DELTA_CALIBRATE_Z, _goto_tower_z); + SUBMENU(MSG_DELTA_CALIBRATE_CENTER, _goto_center); } #endif diff --git a/Marlin/src/lcd/menu/menu_filament.cpp b/Marlin/src/lcd/menu/menu_filament.cpp index 474e326667..7e524c260b 100644 --- a/Marlin/src/lcd/menu/menu_filament.cpp +++ b/Marlin/src/lcd/menu/menu_filament.cpp @@ -80,9 +80,9 @@ void _menu_temp_filament_op(const PauseMode mode, const int8_t extruder) { _change_filament_temp_extruder = extruder; START_MENU(); if (LCD_HEIGHT >= 4) STATIC_ITEM_P(change_filament_header(mode), SS_CENTER|SS_INVERT); - MENU_BACK(MSG_BACK); - MENU_ITEM(function, MSG_PREHEAT_1, _lcd_change_filament_temp_1_func); - MENU_ITEM(function, MSG_PREHEAT_2, _lcd_change_filament_temp_2_func); + BACK_ITEM(MSG_BACK); + ACTION_ITEM(MSG_PREHEAT_1, _lcd_change_filament_temp_1_func); + ACTION_ITEM(MSG_PREHEAT_2, _lcd_change_filament_temp_2_func); uint16_t max_temp; switch (extruder) { default: max_temp = HEATER_0_MAXTEMP; @@ -102,7 +102,7 @@ void _menu_temp_filament_op(const PauseMode mode, const int8_t extruder) { #endif #endif } - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_PREHEAT_CUSTOM, &thermalManager.temp_hotend[_change_filament_temp_extruder].target, EXTRUDE_MINTEMP, max_temp - 15, _lcd_change_filament_temp_custom_cb); + EDIT_ITEM_FAST(int3, MSG_PREHEAT_CUSTOM, &thermalManager.temp_hotend[_change_filament_temp_extruder].target, EXTRUDE_MINTEMP, max_temp - 15, _lcd_change_filament_temp_custom_cb); END_MENU(); } #if E_STEPPERS @@ -142,7 +142,7 @@ void _menu_temp_filament_op(const PauseMode mode, const int8_t extruder) { #if E_STEPPERS > 1 || ENABLED(FILAMENT_LOAD_UNLOAD_GCODES) void menu_change_filament() { START_MENU(); - MENU_BACK(MSG_MAIN); + BACK_ITEM(MSG_MAIN); // Change filament #if E_STEPPERS == 1 @@ -245,9 +245,9 @@ void _menu_temp_filament_op(const PauseMode mode, const int8_t extruder) { // Unload filament #if E_STEPPERS == 1 if (thermalManager.targetHotEnoughToExtrude(active_extruder)) - MENU_ITEM(gcode, MSG_FILAMENTUNLOAD, PSTR("M702")); + GCODES_ITEM(MSG_FILAMENTUNLOAD, PSTR("M702")); else - MENU_ITEM(submenu, MSG_FILAMENTUNLOAD, menu_temp_e0_filament_unload); + SUBMENU(MSG_FILAMENTUNLOAD, menu_temp_e0_filament_unload); #else #if ENABLED(FILAMENT_UNLOAD_ALL_EXTRUDERS) if (thermalManager.targetHotEnoughToExtrude(0) @@ -267,38 +267,38 @@ void _menu_temp_filament_op(const PauseMode mode, const int8_t extruder) { #endif // E_STEPPERS > 2 #endif // E_STEPPERS > 1 ) - MENU_ITEM(gcode, MSG_FILAMENTUNLOAD_ALL, PSTR("M702")); + GCODES_ITEM(MSG_FILAMENTUNLOAD_ALL, PSTR("M702")); else - MENU_ITEM(submenu, MSG_FILAMENTUNLOAD_ALL, menu_unload_filament_all_temp); + SUBMENU(MSG_FILAMENTUNLOAD_ALL, menu_unload_filament_all_temp); #endif if (thermalManager.targetHotEnoughToExtrude(0)) - MENU_ITEM(gcode, MSG_FILAMENTUNLOAD " " MSG_E1, PSTR("M702 T0")); + GCODES_ITEM(MSG_FILAMENTUNLOAD " " MSG_E1, PSTR("M702 T0")); else - MENU_ITEM(submenu, MSG_FILAMENTUNLOAD " " MSG_E1, menu_temp_e0_filament_unload); + SUBMENU(MSG_FILAMENTUNLOAD " " MSG_E1, menu_temp_e0_filament_unload); if (thermalManager.targetHotEnoughToExtrude(1)) - MENU_ITEM(gcode, MSG_FILAMENTUNLOAD " " MSG_E2, PSTR("M702 T1")); + GCODES_ITEM(MSG_FILAMENTUNLOAD " " MSG_E2, PSTR("M702 T1")); else - MENU_ITEM(submenu, MSG_FILAMENTUNLOAD " " MSG_E2, menu_temp_e1_filament_unload); + SUBMENU(MSG_FILAMENTUNLOAD " " MSG_E2, menu_temp_e1_filament_unload); #if E_STEPPERS > 2 if (thermalManager.targetHotEnoughToExtrude(2)) - MENU_ITEM(gcode, MSG_FILAMENTUNLOAD " " MSG_E3, PSTR("M702 T2")); + GCODES_ITEM(MSG_FILAMENTUNLOAD " " MSG_E3, PSTR("M702 T2")); else - MENU_ITEM(submenu, MSG_FILAMENTUNLOAD " " MSG_E3, menu_temp_e2_filament_unload); + SUBMENU(MSG_FILAMENTUNLOAD " " MSG_E3, menu_temp_e2_filament_unload); #if E_STEPPERS > 3 if (thermalManager.targetHotEnoughToExtrude(3)) - MENU_ITEM(gcode, MSG_FILAMENTUNLOAD " " MSG_E4, PSTR("M702 T3")); + GCODES_ITEM(MSG_FILAMENTUNLOAD " " MSG_E4, PSTR("M702 T3")); else - MENU_ITEM(submenu, MSG_FILAMENTUNLOAD " " MSG_E4, menu_temp_e3_filament_unload); + SUBMENU(MSG_FILAMENTUNLOAD " " MSG_E4, menu_temp_e3_filament_unload); #if E_STEPPERS > 4 if (thermalManager.targetHotEnoughToExtrude(4)) - MENU_ITEM(gcode, MSG_FILAMENTUNLOAD " " MSG_E5, PSTR("M702 T4")); + GCODES_ITEM(MSG_FILAMENTUNLOAD " " MSG_E5, PSTR("M702 T4")); else - MENU_ITEM(submenu, MSG_FILAMENTUNLOAD " " MSG_E5, menu_temp_e4_filament_unload); + SUBMENU(MSG_FILAMENTUNLOAD " " MSG_E5, menu_temp_e4_filament_unload); #if E_STEPPERS > 5 if (thermalManager.targetHotEnoughToExtrude(5)) - MENU_ITEM(gcode, MSG_FILAMENTUNLOAD " " MSG_E6, PSTR("M702 T5")); + GCODES_ITEM(MSG_FILAMENTUNLOAD " " MSG_E6, PSTR("M702 T5")); else - MENU_ITEM(submenu, MSG_FILAMENTUNLOAD " " MSG_E6, menu_temp_e5_filament_unload); + SUBMENU(MSG_FILAMENTUNLOAD " " MSG_E6, menu_temp_e5_filament_unload); #endif // E_STEPPERS > 5 #endif // E_STEPPERS > 4 #endif // E_STEPPERS > 3 @@ -353,13 +353,13 @@ void menu_pause_option() { #if LCD_HEIGHT > 2 STATIC_ITEM(MSG_FILAMENT_CHANGE_OPTION_HEADER); #endif - MENU_ITEM(function, MSG_FILAMENT_CHANGE_OPTION_PURGE, lcd_pause_extrude_more); + ACTION_ITEM(MSG_FILAMENT_CHANGE_OPTION_PURGE, lcd_pause_extrude_more); #if HAS_FILAMENT_SENSOR if (runout.filament_ran_out) - MENU_ITEM_EDIT_CALLBACK(bool, MSG_RUNOUT_SENSOR, &runout.enabled, runout.reset); + EDIT_ITEM(bool, MSG_RUNOUT_SENSOR, &runout.enabled, runout.reset); else #endif - MENU_ITEM(function, MSG_FILAMENT_CHANGE_OPTION_RESUME, lcd_pause_resume_print); + ACTION_ITEM(MSG_FILAMENT_CHANGE_OPTION_RESUME, lcd_pause_resume_print); END_MENU(); } diff --git a/Marlin/src/lcd/menu/menu_game.cpp b/Marlin/src/lcd/menu/menu_game.cpp index 36b7f18314..4f9748dc12 100644 --- a/Marlin/src/lcd/menu/menu_game.cpp +++ b/Marlin/src/lcd/menu/menu_game.cpp @@ -29,18 +29,18 @@ void menu_game() { START_MENU(); - MENU_BACK(MSG_MAIN); + BACK_ITEM(MSG_MAIN); #if ENABLED(MARLIN_BRICKOUT) - MENU_ITEM(submenu, MSG_BRICKOUT, brickout.enter_game); + SUBMENU(MSG_BRICKOUT, brickout.enter_game); #endif #if ENABLED(MARLIN_INVADERS) - MENU_ITEM(submenu, MSG_INVADERS, invaders.enter_game); + SUBMENU(MSG_INVADERS, invaders.enter_game); #endif #if ENABLED(MARLIN_SNAKE) - MENU_ITEM(submenu, MSG_SNAKE, snake.enter_game); + SUBMENU(MSG_SNAKE, snake.enter_game); #endif #if ENABLED(MARLIN_MAZE) - MENU_ITEM(submenu, MSG_MAZE, maze.enter_game); + SUBMENU(MSG_MAZE, maze.enter_game); #endif END_MENU(); } diff --git a/Marlin/src/lcd/menu/menu_info.cpp b/Marlin/src/lcd/menu/menu_info.cpp index ac3e720281..26d9441ff7 100644 --- a/Marlin/src/lcd/menu/menu_info.cpp +++ b/Marlin/src/lcd/menu/menu_info.cpp @@ -286,9 +286,9 @@ void menu_info_board() { // void menu_info() { START_MENU(); - MENU_BACK(MSG_MAIN); + BACK_ITEM(MSG_MAIN); #if ENABLED(LCD_PRINTER_INFO_IS_BOOTSCREEN) - MENU_ITEM(submenu, MSG_INFO_PRINTER_MENU, ( + SUBMENU(MSG_INFO_PRINTER_MENU, ( #if ENABLED(SHOW_CUSTOM_BOOTSCREEN) menu_show_custom_bootscreen #else @@ -296,24 +296,24 @@ void menu_info() { #endif )); #else - MENU_ITEM(submenu, MSG_INFO_PRINTER_MENU, menu_info_printer); // Printer Info > - MENU_ITEM(submenu, MSG_INFO_BOARD_MENU, menu_info_board); // Board Info > + SUBMENU(MSG_INFO_PRINTER_MENU, menu_info_printer); // Printer Info > + SUBMENU(MSG_INFO_BOARD_MENU, menu_info_board); // Board Info > #if EXTRUDERS - MENU_ITEM(submenu, MSG_INFO_THERMISTOR_MENU, menu_info_thermistors); // Thermistors > + SUBMENU(MSG_INFO_THERMISTOR_MENU, menu_info_thermistors); // Thermistors > #endif #endif #if ENABLED(PRINTCOUNTER) - MENU_ITEM(submenu, MSG_INFO_STATS_MENU, menu_info_stats); // Printer Stats > + SUBMENU(MSG_INFO_STATS_MENU, menu_info_stats); // Printer Stats > #endif #if HAS_GAMES #if ENABLED(GAMES_EASTER_EGG) - MENU_ITEM_DUMMY(); - MENU_ITEM_DUMMY(); - MENU_ITEM_DUMMY(); + SKIP_ITEM(); + SKIP_ITEM(); + SKIP_ITEM(); #endif - MENU_ITEM(submenu, MSG_GAMES, ( + SUBMENU(MSG_GAMES, ( #if HAS_GAME_MENU menu_game #elif ENABLED(MARLIN_BRICKOUT) diff --git a/Marlin/src/lcd/menu/menu_job_recovery.cpp b/Marlin/src/lcd/menu/menu_job_recovery.cpp index 449251d9b2..0b0b040921 100644 --- a/Marlin/src/lcd/menu/menu_job_recovery.cpp +++ b/Marlin/src/lcd/menu/menu_job_recovery.cpp @@ -50,8 +50,8 @@ void menu_job_recovery() { ui.defer_status_screen(); START_MENU(); STATIC_ITEM(MSG_OUTAGE_RECOVERY); - MENU_ITEM(function, MSG_RESUME_PRINT, lcd_power_loss_recovery_resume); - MENU_ITEM(function, MSG_STOP_PRINT, lcd_power_loss_recovery_cancel); + ACTION_ITEM(MSG_RESUME_PRINT, lcd_power_loss_recovery_resume); + ACTION_ITEM(MSG_STOP_PRINT, lcd_power_loss_recovery_cancel); END_MENU(); } diff --git a/Marlin/src/lcd/menu/menu_led.cpp b/Marlin/src/lcd/menu/menu_led.cpp index 5ccac8a0ee..e6644c6852 100644 --- a/Marlin/src/lcd/menu/menu_led.cpp +++ b/Marlin/src/lcd/menu/menu_led.cpp @@ -38,15 +38,15 @@ #if LCD_HEIGHT > 2 STATIC_ITEM(MSG_LED_PRESETS, SS_CENTER|SS_INVERT); #endif - MENU_BACK(MSG_LED_CONTROL); - MENU_ITEM(function, MSG_SET_LEDS_WHITE, leds.set_white); - MENU_ITEM(function, MSG_SET_LEDS_RED, leds.set_red); - MENU_ITEM(function, MSG_SET_LEDS_ORANGE, leds.set_orange); - MENU_ITEM(function, MSG_SET_LEDS_YELLOW,leds.set_yellow); - MENU_ITEM(function, MSG_SET_LEDS_GREEN, leds.set_green); - MENU_ITEM(function, MSG_SET_LEDS_BLUE, leds.set_blue); - MENU_ITEM(function, MSG_SET_LEDS_INDIGO, leds.set_indigo); - MENU_ITEM(function, MSG_SET_LEDS_VIOLET, leds.set_violet); + BACK_ITEM(MSG_LED_CONTROL); + ACTION_ITEM(MSG_SET_LEDS_WHITE, leds.set_white); + ACTION_ITEM(MSG_SET_LEDS_RED, leds.set_red); + ACTION_ITEM(MSG_SET_LEDS_ORANGE, leds.set_orange); + ACTION_ITEM(MSG_SET_LEDS_YELLOW,leds.set_yellow); + ACTION_ITEM(MSG_SET_LEDS_GREEN, leds.set_green); + ACTION_ITEM(MSG_SET_LEDS_BLUE, leds.set_blue); + ACTION_ITEM(MSG_SET_LEDS_INDIGO, leds.set_indigo); + ACTION_ITEM(MSG_SET_LEDS_VIOLET, leds.set_violet); END_MENU(); } @@ -54,14 +54,14 @@ void menu_led_custom() { START_MENU(); - MENU_BACK(MSG_LED_CONTROL); - MENU_ITEM_EDIT_CALLBACK(uint8, MSG_INTENSITY_R, &leds.color.r, 0, 255, leds.update, true); - MENU_ITEM_EDIT_CALLBACK(uint8, MSG_INTENSITY_G, &leds.color.g, 0, 255, leds.update, true); - MENU_ITEM_EDIT_CALLBACK(uint8, MSG_INTENSITY_B, &leds.color.b, 0, 255, leds.update, true); + BACK_ITEM(MSG_LED_CONTROL); + EDIT_ITEM(uint8, MSG_INTENSITY_R, &leds.color.r, 0, 255, leds.update, true); + EDIT_ITEM(uint8, MSG_INTENSITY_G, &leds.color.g, 0, 255, leds.update, true); + EDIT_ITEM(uint8, MSG_INTENSITY_B, &leds.color.b, 0, 255, leds.update, true); #if EITHER(RGBW_LED, NEOPIXEL_LED) - MENU_ITEM_EDIT_CALLBACK(uint8, MSG_INTENSITY_W, &leds.color.w, 0, 255, leds.update, true); + EDIT_ITEM(uint8, MSG_INTENSITY_W, &leds.color.w, 0, 255, leds.update, true); #if ENABLED(NEOPIXEL_LED) - MENU_ITEM_EDIT_CALLBACK(uint8, MSG_LED_BRIGHTNESS, &leds.color.i, 0, 255, leds.update, true); + EDIT_ITEM(uint8, MSG_LED_BRIGHTNESS, &leds.color.i, 0, 255, leds.update, true); #endif #endif END_MENU(); @@ -69,14 +69,14 @@ void menu_led_custom() { void menu_led() { START_MENU(); - MENU_BACK(MSG_MAIN); + BACK_ITEM(MSG_MAIN); bool led_on = leds.lights_on; - MENU_ITEM_EDIT_CALLBACK(bool, MSG_LEDS, &led_on, leds.toggle); - MENU_ITEM(function, MSG_SET_LEDS_DEFAULT, leds.set_default); + EDIT_ITEM(bool, MSG_LEDS, &led_on, leds.toggle); + ACTION_ITEM(MSG_SET_LEDS_DEFAULT, leds.set_default); #if ENABLED(LED_COLOR_PRESETS) - MENU_ITEM(submenu, MSG_LED_PRESETS, menu_led_presets); + SUBMENU(MSG_LED_PRESETS, menu_led_presets); #endif - MENU_ITEM(submenu, MSG_CUSTOM_LEDS, menu_led_custom); + SUBMENU(MSG_CUSTOM_LEDS, menu_led_custom); END_MENU(); } diff --git a/Marlin/src/lcd/menu/menu_main.cpp b/Marlin/src/lcd/menu/menu_main.cpp index df43a09c72..1e13f16ef9 100644 --- a/Marlin/src/lcd/menu/menu_main.cpp +++ b/Marlin/src/lcd/menu/menu_main.cpp @@ -97,7 +97,7 @@ void menu_configuration(); void menu_main() { START_MENU(); - MENU_BACK(MSG_WATCH); + BACK_ITEM(MSG_WATCH); const bool busy = IS_SD_PRINTING() || print_job_timer.isRunning() #if ENABLED(SDSUPPORT) @@ -108,12 +108,12 @@ void menu_main() { if (busy) { #if MACHINE_CAN_PAUSE - MENU_ITEM(function, MSG_PAUSE_PRINT, ui.pause_print); + ACTION_ITEM(MSG_PAUSE_PRINT, ui.pause_print); #endif #if MACHINE_CAN_STOP - MENU_ITEM(submenu, MSG_STOP_PRINT, menu_abort_confirm); + SUBMENU(MSG_STOP_PRINT, menu_abort_confirm); #endif - MENU_ITEM(submenu, MSG_TUNE, menu_tune); + SUBMENU(MSG_TUNE, menu_tune); } else { #if !HAS_ENCODER_WHEEL && ENABLED(SDSUPPORT) @@ -121,12 +121,12 @@ void menu_main() { // Autostart // #if ENABLED(MENU_ADDAUTOSTART) - if (!busy) MENU_ITEM(function, MSG_AUTOSTART, card.beginautostart); + if (!busy) ACTION_ITEM(MSG_AUTOSTART, card.beginautostart); #endif if (card_detected) { if (!card_open) { - MENU_ITEM(submenu, MSG_MEDIA_MENU, menu_media); + SUBMENU(MSG_MEDIA_MENU, menu_media); MENU_ITEM(gcode, #if PIN_EXISTS(SD_DETECT) MSG_CHANGE_MEDIA, PSTR("M21") @@ -138,10 +138,10 @@ void menu_main() { } else { #if PIN_EXISTS(SD_DETECT) - MENU_ITEM(function, MSG_NO_MEDIA, nullptr); + ACTION_ITEM(MSG_NO_MEDIA, nullptr); #else - MENU_ITEM(gcode, MSG_INIT_MEDIA, PSTR("M21")); - MENU_ITEM(function, MSG_MEDIA_RELEASED, nullptr); + GCODES_ITEM(MSG_INIT_MEDIA, PSTR("M21")); + ACTION_ITEM(MSG_MEDIA_RELEASED, nullptr); #endif } #endif // !HAS_ENCODER_WHEEL && SDSUPPORT @@ -152,49 +152,49 @@ void menu_main() { || card.isPaused() #endif ); - if (paused) MENU_ITEM(function, MSG_RESUME_PRINT, ui.resume_print); + if (paused) ACTION_ITEM(MSG_RESUME_PRINT, ui.resume_print); #endif - MENU_ITEM(submenu, MSG_MOTION, menu_motion); + SUBMENU(MSG_MOTION, menu_motion); } #if HAS_CUTTER - MENU_ITEM(submenu, MSG_CUTTER(MENU), menu_spindle_laser); + SUBMENU(MSG_CUTTER(MENU), menu_spindle_laser); #endif - MENU_ITEM(submenu, MSG_TEMPERATURE, menu_temperature); + SUBMENU(MSG_TEMPERATURE, menu_temperature); #if ENABLED(MIXING_EXTRUDER) - MENU_ITEM(submenu, MSG_MIXER, menu_mixer); + SUBMENU(MSG_MIXER, menu_mixer); #endif #if ENABLED(MMU2_MENUS) - if (!busy) MENU_ITEM(submenu, MSG_MMU2_MENU, menu_mmu2); + if (!busy) SUBMENU(MSG_MMU2_MENU, menu_mmu2); #endif - MENU_ITEM(submenu, MSG_CONFIGURATION, menu_configuration); + SUBMENU(MSG_CONFIGURATION, menu_configuration); #if ENABLED(CUSTOM_USER_MENUS) - MENU_ITEM(submenu, MSG_USER_MENU, menu_user); + SUBMENU(MSG_USER_MENU, menu_user); #endif #if ENABLED(ADVANCED_PAUSE_FEATURE) #if E_STEPPERS == 1 && DISABLED(FILAMENT_LOAD_UNLOAD_GCODES) if (thermalManager.targetHotEnoughToExtrude(active_extruder)) - MENU_ITEM(gcode, MSG_FILAMENTCHANGE, PSTR("M600 B0")); + GCODES_ITEM(MSG_FILAMENTCHANGE, PSTR("M600 B0")); else - MENU_ITEM(submenu, MSG_FILAMENTCHANGE, menu_temp_e0_filament_change); + SUBMENU(MSG_FILAMENTCHANGE, menu_temp_e0_filament_change); #else - MENU_ITEM(submenu, MSG_FILAMENTCHANGE, menu_change_filament); + SUBMENU(MSG_FILAMENTCHANGE, menu_change_filament); #endif #endif #if ENABLED(LCD_INFO_MENU) - MENU_ITEM(submenu, MSG_INFO_MENU, menu_info); + SUBMENU(MSG_INFO_MENU, menu_info); #endif #if ENABLED(LED_CONTROL_MENU) - MENU_ITEM(submenu, MSG_LED_CONTROL, menu_led); + SUBMENU(MSG_LED_CONTROL, menu_led); #endif // @@ -202,9 +202,9 @@ void menu_main() { // #if HAS_POWER_SWITCH if (powersupply_on) - MENU_ITEM(gcode, MSG_SWITCH_PS_OFF, PSTR("M81")); + GCODES_ITEM(MSG_SWITCH_PS_OFF, PSTR("M81")); else - MENU_ITEM(gcode, MSG_SWITCH_PS_ON, PSTR("M80")); + GCODES_ITEM(MSG_SWITCH_PS_ON, PSTR("M80")); #endif #if HAS_ENCODER_WHEEL && ENABLED(SDSUPPORT) @@ -212,7 +212,7 @@ void menu_main() { // Autostart // #if ENABLED(MENU_ADDAUTOSTART) - if (!busy) MENU_ITEM(function, MSG_AUTOSTART, card.beginautostart); + if (!busy) ACTION_ITEM(MSG_AUTOSTART, card.beginautostart); #endif if (card_detected) { @@ -224,37 +224,37 @@ void menu_main() { MSG_RELEASE_MEDIA, PSTR("M22") #endif ); - MENU_ITEM(submenu, MSG_MEDIA_MENU, menu_media); + SUBMENU(MSG_MEDIA_MENU, menu_media); } } else { #if PIN_EXISTS(SD_DETECT) - MENU_ITEM(function, MSG_NO_MEDIA, nullptr); + ACTION_ITEM(MSG_NO_MEDIA, nullptr); #else - MENU_ITEM(gcode, MSG_INIT_MEDIA, PSTR("M21")); - MENU_ITEM(function, MSG_MEDIA_RELEASED, nullptr); + GCODES_ITEM(MSG_INIT_MEDIA, PSTR("M21")); + ACTION_ITEM(MSG_MEDIA_RELEASED, nullptr); #endif } #endif // HAS_ENCODER_WHEEL && SDSUPPORT #if HAS_SERVICE_INTERVALS #if SERVICE_INTERVAL_1 > 0 - MENU_ITEM(submenu, SERVICE_NAME_1, menu_service1); + SUBMENU(SERVICE_NAME_1, menu_service1); #endif #if SERVICE_INTERVAL_2 > 0 - MENU_ITEM(submenu, SERVICE_NAME_2, menu_service2); + SUBMENU(SERVICE_NAME_2, menu_service2); #endif #if SERVICE_INTERVAL_3 > 0 - MENU_ITEM(submenu, SERVICE_NAME_3, menu_service3); + SUBMENU(SERVICE_NAME_3, menu_service3); #endif #endif #if HAS_GAMES && DISABLED(LCD_INFO_MENU) #if ENABLED(GAMES_EASTER_EGG) - MENU_ITEM_DUMMY(); - MENU_ITEM_DUMMY(); + SKIP_ITEM(); + SKIP_ITEM(); #endif - MENU_ITEM(submenu, MSG_GAMES, ( + SUBMENU(MSG_GAMES, ( #if HAS_GAME_MENU menu_game #elif ENABLED(MARLIN_BRICKOUT) diff --git a/Marlin/src/lcd/menu/menu_media.cpp b/Marlin/src/lcd/menu/menu_media.cpp index ac1631660d..5ddff83ffb 100644 --- a/Marlin/src/lcd/menu/menu_media.cpp +++ b/Marlin/src/lcd/menu/menu_media.cpp @@ -138,14 +138,14 @@ void menu_media() { #endif START_MENU(); - MENU_BACK(MSG_MAIN); + BACK_ITEM(MSG_MAIN); if (card.flag.workDirIsRoot) { #if !PIN_EXISTS(SD_DETECT) - MENU_ITEM(function, LCD_STR_REFRESH MSG_REFRESH, lcd_sd_refresh); + ACTION_ITEM(LCD_STR_REFRESH MSG_REFRESH, lcd_sd_refresh); #endif } else if (card.isMounted()) - MENU_ITEM(function, LCD_STR_FOLDER "..", lcd_sd_updir); + ACTION_ITEM(LCD_STR_FOLDER "..", lcd_sd_updir); if (ui.should_draw()) for (uint16_t i = 0; i < fileCnt; i++) { if (_menuLineNr == _thisItemNr) { @@ -163,7 +163,7 @@ void menu_media() { MENU_ITEM(sdfile, MSG_MEDIA_MENU, card); } else { - MENU_ITEM_DUMMY(); + SKIP_ITEM(); } } END_MENU(); diff --git a/Marlin/src/lcd/menu/menu_mixer.cpp b/Marlin/src/lcd/menu/menu_mixer.cpp index cd23282044..c89e67d368 100644 --- a/Marlin/src/lcd/menu/menu_mixer.cpp +++ b/Marlin/src/lcd/menu/menu_mixer.cpp @@ -90,24 +90,24 @@ void lcd_mixer_edit_gradient_menu() { START_MENU(); - MENU_BACK(MSG_MIXER); + BACK_ITEM(MSG_MIXER); - MENU_ITEM_EDIT_CALLBACK(int8, MSG_START_VTOOL, &mixer.gradient.start_vtool, 0, MIXING_VIRTUAL_TOOLS - 1, mixer.refresh_gradient); - MENU_ITEM_EDIT_CALLBACK(int8, MSG_END_VTOOL, &mixer.gradient.end_vtool, 0, MIXING_VIRTUAL_TOOLS - 1, mixer.refresh_gradient); + EDIT_ITEM(int8, MSG_START_VTOOL, &mixer.gradient.start_vtool, 0, MIXING_VIRTUAL_TOOLS - 1, mixer.refresh_gradient); + EDIT_ITEM(int8, MSG_END_VTOOL, &mixer.gradient.end_vtool, 0, MIXING_VIRTUAL_TOOLS - 1, mixer.refresh_gradient); #if ENABLED(GRADIENT_VTOOL) - MENU_ITEM_EDIT_CALLBACK(int8, MSG_GRADIENT_ALIAS, &mixer.gradient.vtool_index, 0, MIXING_VIRTUAL_TOOLS - 1, mixer.refresh_gradient); + EDIT_ITEM(int8, MSG_GRADIENT_ALIAS, &mixer.gradient.vtool_index, 0, MIXING_VIRTUAL_TOOLS - 1, mixer.refresh_gradient); #endif char tmp[18]; - MENU_ITEM(submenu, MSG_START_Z ":", lcd_mixer_gradient_z_start_edit); + SUBMENU(MSG_START_Z ":", lcd_mixer_gradient_z_start_edit); MENU_ITEM_ADDON_START(9); sprintf_P(tmp, PSTR("%4d.%d mm"), int(mixer.gradient.start_z), int(mixer.gradient.start_z * 10) % 10); LCDPRINT(tmp); MENU_ITEM_ADDON_END(); - MENU_ITEM(submenu, MSG_END_Z ":", lcd_mixer_gradient_z_end_edit); + SUBMENU(MSG_END_Z ":", lcd_mixer_gradient_z_end_edit); MENU_ITEM_ADDON_START(9); sprintf_P(tmp, PSTR("%4d.%d mm"), int(mixer.gradient.end_z), int(mixer.gradient.end_z * 10) % 10); LCDPRINT(tmp); @@ -158,10 +158,10 @@ void lcd_mixer_mix_edit() { #if CHANNEL_MIX_EDITING - #define EDIT_COLOR(N) MENU_MULTIPLIER_ITEM_EDIT(float52, MSG_MIX_COMPONENT " " STRINGIFY(N), &mixer.collector[N-1], 0, 10); + #define EDIT_COLOR(N) EDIT_ITEM_FAST(float52, MSG_MIX_COMPONENT " " STRINGIFY(N), &mixer.collector[N-1], 0, 10); START_MENU(); - MENU_BACK(MSG_MIXER); + BACK_ITEM(MSG_MIXER); EDIT_COLOR(1); EDIT_COLOR(2); #if MIXING_STEPPERS > 2 @@ -176,8 +176,8 @@ void lcd_mixer_mix_edit() { #endif #endif #endif - MENU_ITEM(function, MSG_CYCLE_MIX, _lcd_mixer_cycle_mix); - MENU_ITEM(function, MSG_COMMIT_VTOOL, _lcd_mixer_commit_vtool); + ACTION_ITEM(MSG_CYCLE_MIX, _lcd_mixer_cycle_mix); + ACTION_ITEM(MSG_COMMIT_VTOOL, _lcd_mixer_commit_vtool); END_MENU(); #elif DUAL_MIXING_EXTRUDER @@ -199,7 +199,7 @@ void lcd_mixer_mix_edit() { #else START_MENU(); - MENU_BACK(MSG_MIXER); + BACK_ITEM(MSG_MIXER); END_MENU(); #endif @@ -263,10 +263,10 @@ void menu_mixer_vtools_reset_confirm() { void menu_mixer() { START_MENU(); - MENU_BACK(MSG_MAIN); + BACK_ITEM(MSG_MAIN); v_index = mixer.get_current_vtool(); - MENU_ITEM_EDIT_CALLBACK(uint8, MSG_ACTIVE_VTOOL, &v_index, 0, MIXING_VIRTUAL_TOOLS - 1, _lcd_mixer_select_vtool + EDIT_ITEM(uint8, MSG_ACTIVE_VTOOL, &v_index, 0, MIXING_VIRTUAL_TOOLS - 1, _lcd_mixer_select_vtool #if DUAL_MIXING_EXTRUDER , true #endif @@ -275,29 +275,29 @@ void menu_mixer() { #if DUAL_MIXING_EXTRUDER { char tmp[10]; - MENU_ITEM(submenu, MSG_MIX, lcd_mixer_mix_edit); + SUBMENU(MSG_MIX, lcd_mixer_mix_edit); MENU_ITEM_ADDON_START(10); mixer.update_mix_from_vtool(); sprintf_P(tmp, PSTR("%3d;%3d%%"), int(mixer.mix[0]), int(mixer.mix[1])); LCDPRINT(tmp); MENU_ITEM_ADDON_END(); - MENU_ITEM(function, MSG_TOGGLE_MIX, _lcd_mixer_toggle_mix); + ACTION_ITEM(MSG_TOGGLE_MIX, _lcd_mixer_toggle_mix); } #else - MENU_ITEM(submenu, MSG_MIX, _lcd_goto_mix_edit); + SUBMENU(MSG_MIX, _lcd_goto_mix_edit); #endif - MENU_ITEM(submenu, MSG_RESET_VTOOLS, menu_mixer_vtools_reset_confirm); + SUBMENU(MSG_RESET_VTOOLS, menu_mixer_vtools_reset_confirm); #if ENABLED(GRADIENT_MIX) { char tmp[13]; - MENU_ITEM(submenu, MSG_GRADIENT, lcd_mixer_edit_gradient_menu); + SUBMENU(MSG_GRADIENT, lcd_mixer_edit_gradient_menu); MENU_ITEM_ADDON_START(10); sprintf_P(tmp, PSTR("T%i->T%i"), mixer.gradient.start_vtool, mixer.gradient.end_vtool); LCDPRINT(tmp); MENU_ITEM_ADDON_END(); - MENU_ITEM(function, MSG_REVERSE_GRADIENT, _lcd_mixer_reverse_gradient); + ACTION_ITEM(MSG_REVERSE_GRADIENT, _lcd_mixer_reverse_gradient); } #endif diff --git a/Marlin/src/lcd/menu/menu_mmu2.cpp b/Marlin/src/lcd/menu/menu_mmu2.cpp index 9a0908961e..5bd79c7353 100644 --- a/Marlin/src/lcd/menu/menu_mmu2.cpp +++ b/Marlin/src/lcd/menu/menu_mmu2.cpp @@ -71,24 +71,24 @@ inline void action_mmu2_load_filament_4() { _mmu2_load_filament(4); } void menu_mmu2_load_filament() { START_MENU(); - MENU_BACK(MSG_MMU2_MENU); - MENU_ITEM(function, MSG_MMU2_ALL, action_mmu2_load_all); - MENU_ITEM(function, MSG_MMU2_FILAMENT0, action_mmu2_load_filament_0); - MENU_ITEM(function, MSG_MMU2_FILAMENT1, action_mmu2_load_filament_1); - MENU_ITEM(function, MSG_MMU2_FILAMENT2, action_mmu2_load_filament_2); - MENU_ITEM(function, MSG_MMU2_FILAMENT3, action_mmu2_load_filament_3); - MENU_ITEM(function, MSG_MMU2_FILAMENT4, action_mmu2_load_filament_4); + BACK_ITEM(MSG_MMU2_MENU); + ACTION_ITEM(MSG_MMU2_ALL, action_mmu2_load_all); + ACTION_ITEM(MSG_MMU2_FILAMENT0, action_mmu2_load_filament_0); + ACTION_ITEM(MSG_MMU2_FILAMENT1, action_mmu2_load_filament_1); + ACTION_ITEM(MSG_MMU2_FILAMENT2, action_mmu2_load_filament_2); + ACTION_ITEM(MSG_MMU2_FILAMENT3, action_mmu2_load_filament_3); + ACTION_ITEM(MSG_MMU2_FILAMENT4, action_mmu2_load_filament_4); END_MENU(); } void menu_mmu2_load_to_nozzle() { START_MENU(); - MENU_BACK(MSG_MMU2_MENU); - MENU_ITEM(function, MSG_MMU2_FILAMENT0, action_mmu2_load_filament_to_nozzle_0); - MENU_ITEM(function, MSG_MMU2_FILAMENT1, action_mmu2_load_filament_to_nozzle_1); - MENU_ITEM(function, MSG_MMU2_FILAMENT2, action_mmu2_load_filament_to_nozzle_2); - MENU_ITEM(function, MSG_MMU2_FILAMENT3, action_mmu2_load_filament_to_nozzle_3); - MENU_ITEM(function, MSG_MMU2_FILAMENT4, action_mmu2_load_filament_to_nozzle_4); + BACK_ITEM(MSG_MMU2_MENU); + ACTION_ITEM(MSG_MMU2_FILAMENT0, action_mmu2_load_filament_to_nozzle_0); + ACTION_ITEM(MSG_MMU2_FILAMENT1, action_mmu2_load_filament_to_nozzle_1); + ACTION_ITEM(MSG_MMU2_FILAMENT2, action_mmu2_load_filament_to_nozzle_2); + ACTION_ITEM(MSG_MMU2_FILAMENT3, action_mmu2_load_filament_to_nozzle_3); + ACTION_ITEM(MSG_MMU2_FILAMENT4, action_mmu2_load_filament_to_nozzle_4); END_MENU(); } @@ -118,12 +118,12 @@ void action_mmu2_unload_filament() { void menu_mmu2_eject_filament() { START_MENU(); - MENU_BACK(MSG_MMU2_MENU); - MENU_ITEM(function, MSG_MMU2_FILAMENT0, action_mmu2_eject_filament_0); - MENU_ITEM(function, MSG_MMU2_FILAMENT1, action_mmu2_eject_filament_1); - MENU_ITEM(function, MSG_MMU2_FILAMENT2, action_mmu2_eject_filament_2); - MENU_ITEM(function, MSG_MMU2_FILAMENT3, action_mmu2_eject_filament_3); - MENU_ITEM(function, MSG_MMU2_FILAMENT4, action_mmu2_eject_filament_4); + BACK_ITEM(MSG_MMU2_MENU); + ACTION_ITEM(MSG_MMU2_FILAMENT0, action_mmu2_eject_filament_0); + ACTION_ITEM(MSG_MMU2_FILAMENT1, action_mmu2_eject_filament_1); + ACTION_ITEM(MSG_MMU2_FILAMENT2, action_mmu2_eject_filament_2); + ACTION_ITEM(MSG_MMU2_FILAMENT3, action_mmu2_eject_filament_3); + ACTION_ITEM(MSG_MMU2_FILAMENT4, action_mmu2_eject_filament_4); END_MENU(); } @@ -138,12 +138,12 @@ void action_mmu2_reset() { void menu_mmu2() { START_MENU(); - MENU_BACK(MSG_MAIN); - MENU_ITEM(submenu, MSG_MMU2_LOAD_FILAMENT, menu_mmu2_load_filament); - MENU_ITEM(submenu, MSG_MMU2_LOAD_TO_NOZZLE, menu_mmu2_load_to_nozzle); - MENU_ITEM(submenu, MSG_MMU2_EJECT_FILAMENT, menu_mmu2_eject_filament); - MENU_ITEM(function, MSG_MMU2_UNLOAD_FILAMENT, action_mmu2_unload_filament); - MENU_ITEM(function, MSG_MMU2_RESET, action_mmu2_reset); + BACK_ITEM(MSG_MAIN); + SUBMENU(MSG_MMU2_LOAD_FILAMENT, menu_mmu2_load_filament); + SUBMENU(MSG_MMU2_LOAD_TO_NOZZLE, menu_mmu2_load_to_nozzle); + SUBMENU(MSG_MMU2_EJECT_FILAMENT, menu_mmu2_eject_filament); + ACTION_ITEM(MSG_MMU2_UNLOAD_FILAMENT, action_mmu2_unload_filament); + ACTION_ITEM(MSG_MMU2_RESET, action_mmu2_reset); END_MENU(); } @@ -166,11 +166,11 @@ void menu_mmu2_choose_filament() { #if LCD_HEIGHT > 2 STATIC_ITEM(MSG_MMU2_CHOOSE_FILAMENT_HEADER, SS_CENTER|SS_INVERT); #endif - MENU_ITEM(function, MSG_MMU2_FILAMENT0, action_mmu2_choose0); - MENU_ITEM(function, MSG_MMU2_FILAMENT1, action_mmu2_choose1); - MENU_ITEM(function, MSG_MMU2_FILAMENT2, action_mmu2_choose2); - MENU_ITEM(function, MSG_MMU2_FILAMENT3, action_mmu2_choose3); - MENU_ITEM(function, MSG_MMU2_FILAMENT4, action_mmu2_choose4); + ACTION_ITEM(MSG_MMU2_FILAMENT0, action_mmu2_choose0); + ACTION_ITEM(MSG_MMU2_FILAMENT1, action_mmu2_choose1); + ACTION_ITEM(MSG_MMU2_FILAMENT2, action_mmu2_choose2); + ACTION_ITEM(MSG_MMU2_FILAMENT3, action_mmu2_choose3); + ACTION_ITEM(MSG_MMU2_FILAMENT4, action_mmu2_choose4); END_MENU(); } @@ -189,10 +189,10 @@ void menu_mmu2_pause() { #if LCD_HEIGHT > 2 STATIC_ITEM(MSG_MMU2_FILAMENT_CHANGE_HEADER, SS_CENTER|SS_INVERT); #endif - MENU_ITEM(function, MSG_MMU2_RESUME, action_mmu2_M600_resume); - MENU_ITEM(function, MSG_MMU2_UNLOAD_FILAMENT, action_mmu2_M600_unload_filament); - MENU_ITEM(function, MSG_MMU2_LOAD_FILAMENT, action_mmu2_M600_load_current_filament); - MENU_ITEM(function, MSG_MMU2_LOAD_TO_NOZZLE, action_mmu2_M600_load_current_filament_to_nozzle); + ACTION_ITEM(MSG_MMU2_RESUME, action_mmu2_M600_resume); + ACTION_ITEM(MSG_MMU2_UNLOAD_FILAMENT, action_mmu2_M600_unload_filament); + ACTION_ITEM(MSG_MMU2_LOAD_FILAMENT, action_mmu2_M600_load_current_filament); + ACTION_ITEM(MSG_MMU2_LOAD_TO_NOZZLE, action_mmu2_M600_load_current_filament_to_nozzle); END_MENU(); } diff --git a/Marlin/src/lcd/menu/menu_motion.cpp b/Marlin/src/lcd/menu/menu_motion.cpp index da8c33225c..204a31167e 100644 --- a/Marlin/src/lcd/menu/menu_motion.cpp +++ b/Marlin/src/lcd/menu/menu_motion.cpp @@ -275,16 +275,16 @@ void _menu_move_distance(const AxisEnum axis, const screenFunc_t func, const int } #if ENABLED(PREVENT_COLD_EXTRUSION) if (axis == E_AXIS && thermalManager.tooColdToExtrude(eindex >= 0 ? eindex : active_extruder)) - MENU_BACK(MSG_HOTEND_TOO_COLD); + BACK_ITEM(MSG_HOTEND_TOO_COLD); else #endif { - MENU_BACK(MSG_MOVE_AXIS); - MENU_ITEM(submenu, MSG_MOVE_10MM, menu_move_10mm); - MENU_ITEM(submenu, MSG_MOVE_1MM, menu_move_1mm); - MENU_ITEM(submenu, MSG_MOVE_01MM, menu_move_01mm); + BACK_ITEM(MSG_MOVE_AXIS); + SUBMENU(MSG_MOVE_10MM, menu_move_10mm); + SUBMENU(MSG_MOVE_1MM, menu_move_1mm); + SUBMENU(MSG_MOVE_01MM, menu_move_01mm); if (axis == Z_AXIS && (SHORT_MANUAL_Z_MOVE) > 0.0f && (SHORT_MANUAL_Z_MOVE) < 0.1f) { - MENU_ITEM(submenu, "", []{ _goto_manual_move(float(SHORT_MANUAL_Z_MOVE)); }); + SUBMENU("", []{ _goto_manual_move(float(SHORT_MANUAL_Z_MOVE)); }); MENU_ITEM_ADDON_START(1); char tmp[20], numstr[10]; // Determine digits needed right of decimal @@ -330,10 +330,10 @@ void lcd_move_get_z_amount() { _menu_move_distance(Z_AXIS, lcd_move_z); } void menu_move() { START_MENU(); - MENU_BACK(MSG_MOTION); + BACK_ITEM(MSG_MOTION); #if HAS_SOFTWARE_ENDSTOPS && ENABLED(SOFT_ENDSTOPS_MENU_ITEM) - MENU_ITEM_EDIT(bool, MSG_LCD_SOFT_ENDSTOPS, &soft_endstops_enabled); + EDIT_ITEM(bool, MSG_LCD_SOFT_ENDSTOPS, &soft_endstops_enabled); #endif if ( @@ -350,57 +350,57 @@ void menu_move() { true #endif ) { - MENU_ITEM(submenu, MSG_MOVE_X, lcd_move_get_x_amount); - MENU_ITEM(submenu, MSG_MOVE_Y, lcd_move_get_y_amount); + SUBMENU(MSG_MOVE_X, lcd_move_get_x_amount); + SUBMENU(MSG_MOVE_Y, lcd_move_get_y_amount); } #if ENABLED(DELTA) else - MENU_ITEM(function, MSG_FREE_XY, lcd_lower_z_to_clip_height); + ACTION_ITEM(MSG_FREE_XY, lcd_lower_z_to_clip_height); #endif - MENU_ITEM(submenu, MSG_MOVE_Z, lcd_move_get_z_amount); + SUBMENU(MSG_MOVE_Z, lcd_move_get_z_amount); } else - MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28")); + GCODES_ITEM(MSG_AUTO_HOME, PSTR("G28")); #if ANY(SWITCHING_EXTRUDER, SWITCHING_NOZZLE, MAGNETIC_SWITCHING_TOOLHEAD) #if EXTRUDERS == 6 switch (active_extruder) { - case 0: MENU_ITEM(gcode, MSG_SELECT " " MSG_E2, PSTR("T1")); break; - case 1: MENU_ITEM(gcode, MSG_SELECT " " MSG_E1, PSTR("T0")); break; - case 2: MENU_ITEM(gcode, MSG_SELECT " " MSG_E4, PSTR("T3")); break; - case 3: MENU_ITEM(gcode, MSG_SELECT " " MSG_E3, PSTR("T2")); break; - case 4: MENU_ITEM(gcode, MSG_SELECT " " MSG_E6, PSTR("T5")); break; - case 5: MENU_ITEM(gcode, MSG_SELECT " " MSG_E5, PSTR("T4")); break; + case 0: GCODES_ITEM(MSG_SELECT " " MSG_E2, PSTR("T1")); break; + case 1: GCODES_ITEM(MSG_SELECT " " MSG_E1, PSTR("T0")); break; + case 2: GCODES_ITEM(MSG_SELECT " " MSG_E4, PSTR("T3")); break; + case 3: GCODES_ITEM(MSG_SELECT " " MSG_E3, PSTR("T2")); break; + case 4: GCODES_ITEM(MSG_SELECT " " MSG_E6, PSTR("T5")); break; + case 5: GCODES_ITEM(MSG_SELECT " " MSG_E5, PSTR("T4")); break; } #elif EXTRUDERS == 5 || EXTRUDERS == 4 switch (active_extruder) { - case 0: MENU_ITEM(gcode, MSG_SELECT " " MSG_E2, PSTR("T1")); break; - case 1: MENU_ITEM(gcode, MSG_SELECT " " MSG_E1, PSTR("T0")); break; - case 2: MENU_ITEM(gcode, MSG_SELECT " " MSG_E4, PSTR("T3")); break; - case 3: MENU_ITEM(gcode, MSG_SELECT " " MSG_E3, PSTR("T2")); break; + case 0: GCODES_ITEM(MSG_SELECT " " MSG_E2, PSTR("T1")); break; + case 1: GCODES_ITEM(MSG_SELECT " " MSG_E1, PSTR("T0")); break; + case 2: GCODES_ITEM(MSG_SELECT " " MSG_E4, PSTR("T3")); break; + case 3: GCODES_ITEM(MSG_SELECT " " MSG_E3, PSTR("T2")); break; } #elif EXTRUDERS == 3 if (active_extruder < 2) { if (active_extruder) - MENU_ITEM(gcode, MSG_SELECT " " MSG_E1, PSTR("T0")); + GCODES_ITEM(MSG_SELECT " " MSG_E1, PSTR("T0")); else - MENU_ITEM(gcode, MSG_SELECT " " MSG_E2, PSTR("T1")); + GCODES_ITEM(MSG_SELECT " " MSG_E2, PSTR("T1")); } #else if (active_extruder) - MENU_ITEM(gcode, MSG_SELECT " " MSG_E1, PSTR("T0")); + GCODES_ITEM(MSG_SELECT " " MSG_E1, PSTR("T0")); else - MENU_ITEM(gcode, MSG_SELECT " " MSG_E2, PSTR("T1")); + GCODES_ITEM(MSG_SELECT " " MSG_E2, PSTR("T1")); #endif #elif ENABLED(DUAL_X_CARRIAGE) if (active_extruder) - MENU_ITEM(gcode, MSG_SELECT " " MSG_E1, PSTR("T0")); + GCODES_ITEM(MSG_SELECT " " MSG_E1, PSTR("T0")); else - MENU_ITEM(gcode, MSG_SELECT " " MSG_E2, PSTR("T1")); + GCODES_ITEM(MSG_SELECT " " MSG_E2, PSTR("T1")); #endif @@ -409,29 +409,29 @@ void menu_move() { #if EITHER(SWITCHING_EXTRUDER, SWITCHING_NOZZLE) // Only the current... - MENU_ITEM(submenu, MSG_MOVE_E, lcd_move_get_e_amount); + SUBMENU(MSG_MOVE_E, lcd_move_get_e_amount); // ...and the non-switching #if E_MANUAL == 5 - MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E5, lcd_move_get_e4_amount); + SUBMENU(MSG_MOVE_E MSG_MOVE_E5, lcd_move_get_e4_amount); #elif E_MANUAL == 3 - MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E3, lcd_move_get_e2_amount); + SUBMENU(MSG_MOVE_E MSG_MOVE_E3, lcd_move_get_e2_amount); #endif #else // Independent extruders with one E-stepper per hotend - MENU_ITEM(submenu, MSG_MOVE_E, lcd_move_get_e_amount); + SUBMENU(MSG_MOVE_E, lcd_move_get_e_amount); #if E_MANUAL > 1 - MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E1, lcd_move_get_e0_amount); - MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E2, lcd_move_get_e1_amount); + SUBMENU(MSG_MOVE_E MSG_MOVE_E1, lcd_move_get_e0_amount); + SUBMENU(MSG_MOVE_E MSG_MOVE_E2, lcd_move_get_e1_amount); #if E_MANUAL > 2 - MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E3, lcd_move_get_e2_amount); + SUBMENU(MSG_MOVE_E MSG_MOVE_E3, lcd_move_get_e2_amount); #if E_MANUAL > 3 - MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E4, lcd_move_get_e3_amount); + SUBMENU(MSG_MOVE_E MSG_MOVE_E4, lcd_move_get_e3_amount); #if E_MANUAL > 4 - MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E5, lcd_move_get_e4_amount); + SUBMENU(MSG_MOVE_E MSG_MOVE_E5, lcd_move_get_e4_amount); #if E_MANUAL > 5 - MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E6, lcd_move_get_e5_amount); + SUBMENU(MSG_MOVE_E MSG_MOVE_E6, lcd_move_get_e5_amount); #endif // E_MANUAL > 5 #endif // E_MANUAL > 4 #endif // E_MANUAL > 3 @@ -457,7 +457,7 @@ void menu_motion() { // // ^ Main // - MENU_BACK(MSG_MAIN); + BACK_ITEM(MSG_MAIN); // // Move Axis @@ -465,23 +465,23 @@ void menu_motion() { #if ENABLED(DELTA) if (all_axes_homed()) #endif - MENU_ITEM(submenu, MSG_MOVE_AXIS, menu_move); + SUBMENU(MSG_MOVE_AXIS, menu_move); // // Auto Home // - MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28")); + GCODES_ITEM(MSG_AUTO_HOME, PSTR("G28")); #if ENABLED(INDIVIDUAL_AXIS_HOMING_MENU) - MENU_ITEM(gcode, MSG_AUTO_HOME_X, PSTR("G28 X")); - MENU_ITEM(gcode, MSG_AUTO_HOME_Y, PSTR("G28 Y")); - MENU_ITEM(gcode, MSG_AUTO_HOME_Z, PSTR("G28 Z")); + GCODES_ITEM(MSG_AUTO_HOME_X, PSTR("G28 X")); + GCODES_ITEM(MSG_AUTO_HOME_Y, PSTR("G28 Y")); + GCODES_ITEM(MSG_AUTO_HOME_Z, PSTR("G28 Z")); #endif // // Auto Z-Align // #if ENABLED(Z_STEPPER_AUTO_ALIGN) - MENU_ITEM(gcode, MSG_AUTO_Z_ALIGN, PSTR("G34")); + GCODES_ITEM(MSG_AUTO_Z_ALIGN, PSTR("G34")); #endif // @@ -489,39 +489,39 @@ void menu_motion() { // #if ENABLED(AUTO_BED_LEVELING_UBL) - MENU_ITEM(submenu, MSG_UBL_LEVEL_BED, _lcd_ubl_level_bed); + SUBMENU(MSG_UBL_LEVEL_BED, _lcd_ubl_level_bed); #elif ENABLED(LCD_BED_LEVELING) - if (!g29_in_progress) MENU_ITEM(submenu, MSG_BED_LEVELING, menu_bed_leveling); + if (!g29_in_progress) SUBMENU(MSG_BED_LEVELING, menu_bed_leveling); #elif HAS_LEVELING && DISABLED(SLIM_LCD_MENUS) #if DISABLED(PROBE_MANUALLY) - MENU_ITEM(gcode, MSG_LEVEL_BED, PSTR("G28\nG29")); + GCODES_ITEM(MSG_LEVEL_BED, PSTR("G28\nG29")); #endif if (all_axes_homed() && leveling_is_valid()) { bool new_level_state = planner.leveling_active; - MENU_ITEM_EDIT_CALLBACK(bool, MSG_BED_LEVELING, &new_level_state, _lcd_toggle_bed_leveling); + EDIT_ITEM(bool, MSG_BED_LEVELING, &new_level_state, _lcd_toggle_bed_leveling); } #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float3, MSG_Z_FADE_HEIGHT, &lcd_z_fade_height, 0, 100, _lcd_set_z_fade_height); + EDIT_ITEM_FAST(float3, MSG_Z_FADE_HEIGHT, &lcd_z_fade_height, 0, 100, _lcd_set_z_fade_height); #endif #endif #if ENABLED(LEVEL_BED_CORNERS) && DISABLED(LCD_BED_LEVELING) - MENU_ITEM(function, MSG_LEVEL_CORNERS, _lcd_level_bed_corners); + ACTION_ITEM(MSG_LEVEL_CORNERS, _lcd_level_bed_corners); #endif #if ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST) - MENU_ITEM(gcode, MSG_M48_TEST, PSTR("G28\nM48 P10")); + GCODES_ITEM(MSG_M48_TEST, PSTR("G28\nM48 P10")); #endif // // Disable Steppers // - MENU_ITEM(gcode, MSG_DISABLE_STEPPERS, PSTR("M84")); + GCODES_ITEM(MSG_DISABLE_STEPPERS, PSTR("M84")); END_MENU(); } diff --git a/Marlin/src/lcd/menu/menu_spindle_laser.cpp b/Marlin/src/lcd/menu/menu_spindle_laser.cpp index e3fda1dc37..f9add1cb02 100644 --- a/Marlin/src/lcd/menu/menu_spindle_laser.cpp +++ b/Marlin/src/lcd/menu/menu_spindle_laser.cpp @@ -35,17 +35,17 @@ void menu_spindle_laser() { START_MENU(); - MENU_BACK(MSG_MAIN); + BACK_ITEM(MSG_MAIN); if (cutter.enabled()) { #if ENABLED(SPINDLE_LASER_PWM) - MENU_ITEM_EDIT_CALLBACK(CUTTER_MENU_TYPE, MSG_CUTTER(POWER), &cutter.power, SPEED_POWER_MIN, SPEED_POWER_MAX, cutter.update_output); + EDIT_ITEM(CUTTER_MENU_TYPE, MSG_CUTTER(POWER), &cutter.power, SPEED_POWER_MIN, SPEED_POWER_MAX, cutter.update_output); #endif - MENU_ITEM(function, MSG_CUTTER(OFF), cutter.disable); + ACTION_ITEM(MSG_CUTTER(OFF), cutter.disable); } else { - MENU_ITEM(function, MSG_CUTTER(ON), cutter.enable_forward); + ACTION_ITEM(MSG_CUTTER(ON), cutter.enable_forward); #if ENABLED(SPINDLE_CHANGE_DIR) - MENU_ITEM(function, MSG_SPINDLE_REVERSE, cutter.enable_reverse); + ACTION_ITEM(MSG_SPINDLE_REVERSE, cutter.enable_reverse); #endif } END_MENU(); diff --git a/Marlin/src/lcd/menu/menu_temperature.cpp b/Marlin/src/lcd/menu/menu_temperature.cpp index 24b88e829c..fa93dad8f4 100644 --- a/Marlin/src/lcd/menu/menu_temperature.cpp +++ b/Marlin/src/lcd/menu/menu_temperature.cpp @@ -183,120 +183,120 @@ void _lcd_preheat(const int16_t endnum, const int16_t temph, const int16_t tempb void menu_preheat_m1() { START_MENU(); - MENU_BACK(MSG_TEMPERATURE); + BACK_ITEM(MSG_TEMPERATURE); #if HOTENDS == 1 #if HAS_HEATED_BED - MENU_ITEM(function, MSG_PREHEAT_1, lcd_preheat_m1_e0); - MENU_ITEM(function, MSG_PREHEAT_1_END, lcd_preheat_m1_e0_only); + ACTION_ITEM(MSG_PREHEAT_1, lcd_preheat_m1_e0); + ACTION_ITEM(MSG_PREHEAT_1_END, lcd_preheat_m1_e0_only); #else - MENU_ITEM(function, MSG_PREHEAT_1, lcd_preheat_m1_e0_only); + ACTION_ITEM(MSG_PREHEAT_1, lcd_preheat_m1_e0_only); #endif #elif HOTENDS > 1 #if HAS_HEATED_BED - MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H1, lcd_preheat_m1_e0); - MENU_ITEM(function, MSG_PREHEAT_1_END " " MSG_E1, lcd_preheat_m1_e0_only); - MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H2, lcd_preheat_m1_e1); - MENU_ITEM(function, MSG_PREHEAT_1_END " " MSG_E2, lcd_preheat_m1_e1_only); + ACTION_ITEM(MSG_PREHEAT_1_N MSG_H1, lcd_preheat_m1_e0); + ACTION_ITEM(MSG_PREHEAT_1_END " " MSG_E1, lcd_preheat_m1_e0_only); + ACTION_ITEM(MSG_PREHEAT_1_N MSG_H2, lcd_preheat_m1_e1); + ACTION_ITEM(MSG_PREHEAT_1_END " " MSG_E2, lcd_preheat_m1_e1_only); #else - MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H1, lcd_preheat_m1_e0_only); - MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H2, lcd_preheat_m1_e1_only); + ACTION_ITEM(MSG_PREHEAT_1_N MSG_H1, lcd_preheat_m1_e0_only); + ACTION_ITEM(MSG_PREHEAT_1_N MSG_H2, lcd_preheat_m1_e1_only); #endif #if HOTENDS > 2 #if HAS_HEATED_BED - MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H3, lcd_preheat_m1_e2); - MENU_ITEM(function, MSG_PREHEAT_1_END " " MSG_E3, lcd_preheat_m1_e2_only); + ACTION_ITEM(MSG_PREHEAT_1_N MSG_H3, lcd_preheat_m1_e2); + ACTION_ITEM(MSG_PREHEAT_1_END " " MSG_E3, lcd_preheat_m1_e2_only); #else - MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H3, lcd_preheat_m1_e2_only); + ACTION_ITEM(MSG_PREHEAT_1_N MSG_H3, lcd_preheat_m1_e2_only); #endif #if HOTENDS > 3 #if HAS_HEATED_BED - MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H4, lcd_preheat_m1_e3); - MENU_ITEM(function, MSG_PREHEAT_1_END " " MSG_E4, lcd_preheat_m1_e3_only); + ACTION_ITEM(MSG_PREHEAT_1_N MSG_H4, lcd_preheat_m1_e3); + ACTION_ITEM(MSG_PREHEAT_1_END " " MSG_E4, lcd_preheat_m1_e3_only); #else - MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H4, lcd_preheat_m1_e3_only); + ACTION_ITEM(MSG_PREHEAT_1_N MSG_H4, lcd_preheat_m1_e3_only); #endif #if HOTENDS > 4 #if HAS_HEATED_BED - MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H5, lcd_preheat_m1_e4); - MENU_ITEM(function, MSG_PREHEAT_1_END " " MSG_E5, lcd_preheat_m1_e4_only); + ACTION_ITEM(MSG_PREHEAT_1_N MSG_H5, lcd_preheat_m1_e4); + ACTION_ITEM(MSG_PREHEAT_1_END " " MSG_E5, lcd_preheat_m1_e4_only); #else - MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H5, lcd_preheat_m1_e4_only); + ACTION_ITEM(MSG_PREHEAT_1_N MSG_H5, lcd_preheat_m1_e4_only); #endif #if HOTENDS > 5 #if HAS_HEATED_BED - MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H6, lcd_preheat_m1_e5); - MENU_ITEM(function, MSG_PREHEAT_1_END " " MSG_E6, lcd_preheat_m1_e5_only); + ACTION_ITEM(MSG_PREHEAT_1_N MSG_H6, lcd_preheat_m1_e5); + ACTION_ITEM(MSG_PREHEAT_1_END " " MSG_E6, lcd_preheat_m1_e5_only); #else - MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H6, lcd_preheat_m1_e5_only); + ACTION_ITEM(MSG_PREHEAT_1_N MSG_H6, lcd_preheat_m1_e5_only); #endif #endif // HOTENDS > 5 #endif // HOTENDS > 4 #endif // HOTENDS > 3 #endif // HOTENDS > 2 - MENU_ITEM(function, MSG_PREHEAT_1_ALL, lcd_preheat_m1_all); + ACTION_ITEM(MSG_PREHEAT_1_ALL, lcd_preheat_m1_all); #endif // HOTENDS > 1 #if HAS_HEATED_BED - MENU_ITEM(function, MSG_PREHEAT_1_BEDONLY, lcd_preheat_m1_bedonly); + ACTION_ITEM(MSG_PREHEAT_1_BEDONLY, lcd_preheat_m1_bedonly); #endif END_MENU(); } void menu_preheat_m2() { START_MENU(); - MENU_BACK(MSG_TEMPERATURE); + BACK_ITEM(MSG_TEMPERATURE); #if HOTENDS == 1 #if HAS_HEATED_BED - MENU_ITEM(function, MSG_PREHEAT_2, lcd_preheat_m2_e0); - MENU_ITEM(function, MSG_PREHEAT_2_END, lcd_preheat_m2_e0_only); + ACTION_ITEM(MSG_PREHEAT_2, lcd_preheat_m2_e0); + ACTION_ITEM(MSG_PREHEAT_2_END, lcd_preheat_m2_e0_only); #else - MENU_ITEM(function, MSG_PREHEAT_2, lcd_preheat_m2_e0_only); + ACTION_ITEM(MSG_PREHEAT_2, lcd_preheat_m2_e0_only); #endif #elif HOTENDS > 1 #if HAS_HEATED_BED - MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H1, lcd_preheat_m2_e0); - MENU_ITEM(function, MSG_PREHEAT_2_END " " MSG_E1, lcd_preheat_m2_e0_only); - MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H2, lcd_preheat_m2_e1); - MENU_ITEM(function, MSG_PREHEAT_2_END " " MSG_E2, lcd_preheat_m2_e1_only); + ACTION_ITEM(MSG_PREHEAT_2_N MSG_H1, lcd_preheat_m2_e0); + ACTION_ITEM(MSG_PREHEAT_2_END " " MSG_E1, lcd_preheat_m2_e0_only); + ACTION_ITEM(MSG_PREHEAT_2_N MSG_H2, lcd_preheat_m2_e1); + ACTION_ITEM(MSG_PREHEAT_2_END " " MSG_E2, lcd_preheat_m2_e1_only); #else - MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H1, lcd_preheat_m2_e0_only); - MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H2, lcd_preheat_m2_e1_only); + ACTION_ITEM(MSG_PREHEAT_2_N MSG_H1, lcd_preheat_m2_e0_only); + ACTION_ITEM(MSG_PREHEAT_2_N MSG_H2, lcd_preheat_m2_e1_only); #endif #if HOTENDS > 2 #if HAS_HEATED_BED - MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H3, lcd_preheat_m2_e2); - MENU_ITEM(function, MSG_PREHEAT_2_END " " MSG_E3, lcd_preheat_m2_e2_only); + ACTION_ITEM(MSG_PREHEAT_2_N MSG_H3, lcd_preheat_m2_e2); + ACTION_ITEM(MSG_PREHEAT_2_END " " MSG_E3, lcd_preheat_m2_e2_only); #else - MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H3, lcd_preheat_m2_e2_only); + ACTION_ITEM(MSG_PREHEAT_2_N MSG_H3, lcd_preheat_m2_e2_only); #endif #if HOTENDS > 3 #if HAS_HEATED_BED - MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H4, lcd_preheat_m2_e3); - MENU_ITEM(function, MSG_PREHEAT_2_END " " MSG_E4, lcd_preheat_m2_e3_only); + ACTION_ITEM(MSG_PREHEAT_2_N MSG_H4, lcd_preheat_m2_e3); + ACTION_ITEM(MSG_PREHEAT_2_END " " MSG_E4, lcd_preheat_m2_e3_only); #else - MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H4, lcd_preheat_m2_e3_only); + ACTION_ITEM(MSG_PREHEAT_2_N MSG_H4, lcd_preheat_m2_e3_only); #endif #if HOTENDS > 4 #if HAS_HEATED_BED - MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H5, lcd_preheat_m2_e4); - MENU_ITEM(function, MSG_PREHEAT_2_END " " MSG_E5, lcd_preheat_m2_e4_only); + ACTION_ITEM(MSG_PREHEAT_2_N MSG_H5, lcd_preheat_m2_e4); + ACTION_ITEM(MSG_PREHEAT_2_END " " MSG_E5, lcd_preheat_m2_e4_only); #else - MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H5, lcd_preheat_m2_e4_only); + ACTION_ITEM(MSG_PREHEAT_2_N MSG_H5, lcd_preheat_m2_e4_only); #endif #if HOTENDS > 5 #if HAS_HEATED_BED - MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H6, lcd_preheat_m2_e5); - MENU_ITEM(function, MSG_PREHEAT_2_END " " MSG_E6, lcd_preheat_m2_e5_only); + ACTION_ITEM(MSG_PREHEAT_2_N MSG_H6, lcd_preheat_m2_e5); + ACTION_ITEM(MSG_PREHEAT_2_END " " MSG_E6, lcd_preheat_m2_e5_only); #else - MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H6, lcd_preheat_m2_e5_only); + ACTION_ITEM(MSG_PREHEAT_2_N MSG_H6, lcd_preheat_m2_e5_only); #endif #endif // HOTENDS > 5 #endif // HOTENDS > 4 #endif // HOTENDS > 3 #endif // HOTENDS > 2 - MENU_ITEM(function, MSG_PREHEAT_2_ALL, lcd_preheat_m2_all); + ACTION_ITEM(MSG_PREHEAT_2_ALL, lcd_preheat_m2_all); #endif // HOTENDS > 1 #if HAS_HEATED_BED - MENU_ITEM(function, MSG_PREHEAT_2_BEDONLY, lcd_preheat_m2_bedonly); + ACTION_ITEM(MSG_PREHEAT_2_BEDONLY, lcd_preheat_m2_bedonly); #endif END_MENU(); } @@ -311,16 +311,16 @@ void _lcd_preheat(const int16_t endnum, const int16_t temph, const int16_t tempb void menu_temperature() { START_MENU(); - MENU_BACK(MSG_MAIN); + BACK_ITEM(MSG_MAIN); // // Nozzle: // Nozzle [1-5]: // #if HOTENDS == 1 - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE, &thermalManager.temp_hotend[0].target, 0, HEATER_0_MAXTEMP - 15, thermalManager.start_watching_E0); + EDIT_ITEM_FAST(int3, MSG_NOZZLE, &thermalManager.temp_hotend[0].target, 0, HEATER_0_MAXTEMP - 15, thermalManager.start_watching_E0); #elif HOTENDS > 1 - #define EDIT_TARGET(N) MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE MSG_LCD_N##N, &thermalManager.temp_hotend[N].target, 0, HEATER_##N##_MAXTEMP - 15, thermalManager.start_watching_E##N) + #define EDIT_TARGET(N) EDIT_ITEM_FAST(int3, MSG_NOZZLE MSG_LCD_N##N, &thermalManager.temp_hotend[N].target, 0, HEATER_##N##_MAXTEMP - 15, thermalManager.start_watching_E##N) EDIT_TARGET(0); EDIT_TARGET(1); #if HOTENDS > 2 @@ -338,21 +338,21 @@ void menu_temperature() { #endif // HOTENDS > 1 #if ENABLED(SINGLENOZZLE) - MENU_MULTIPLIER_ITEM_EDIT(uint16_3, MSG_NOZZLE_STANDBY, &singlenozzle_temp[active_extruder ? 0 : 1], 0, HEATER_0_MAXTEMP - 15); + EDIT_ITEM_FAST(uint16_3, MSG_NOZZLE_STANDBY, &singlenozzle_temp[active_extruder ? 0 : 1], 0, HEATER_0_MAXTEMP - 15); #endif // // Bed: // #if HAS_HEATED_BED - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_BED, &thermalManager.temp_bed.target, 0, BED_MAXTEMP - 10, thermalManager.start_watching_bed); + EDIT_ITEM_FAST(int3, MSG_BED, &thermalManager.temp_bed.target, 0, BED_MAXTEMP - 10, thermalManager.start_watching_bed); #endif // // Chamber: // #if HAS_HEATED_CHAMBER - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_CHAMBER, &thermalManager.temp_chamber.target, 0, CHAMBER_MAXTEMP - 5, thermalManager.start_watching_chamber); + EDIT_ITEM_FAST(int3, MSG_CHAMBER, &thermalManager.temp_chamber.target, 0, CHAMBER_MAXTEMP - 5, thermalManager.start_watching_chamber); #endif // @@ -360,21 +360,21 @@ void menu_temperature() { // #if FAN_COUNT > 0 #if HAS_FAN0 - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(percent, MSG_FAN_SPEED FAN_SPEED_1_SUFFIX, &thermalManager.lcd_tmpfan_speed[0], 0, 255, thermalManager.lcd_setFanSpeed0); + EDIT_ITEM_FAST(percent, MSG_FAN_SPEED FAN_SPEED_1_SUFFIX, &thermalManager.lcd_tmpfan_speed[0], 0, 255, thermalManager.lcd_setFanSpeed0); #if ENABLED(EXTRA_FAN_SPEED) - MENU_MULTIPLIER_ITEM_EDIT(percent, MSG_EXTRA_FAN_SPEED FAN_SPEED_1_SUFFIX, &thermalManager.new_fan_speed[0], 3, 255); + EDIT_ITEM_FAST(percent, MSG_EXTRA_FAN_SPEED FAN_SPEED_1_SUFFIX, &thermalManager.new_fan_speed[0], 3, 255); #endif #endif #if HAS_FAN1 || (ENABLED(SINGLENOZZLE) && EXTRUDERS > 1) - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(percent, MSG_FAN_SPEED " 2", &thermalManager.lcd_tmpfan_speed[1], 0, 255, thermalManager.lcd_setFanSpeed1); + EDIT_ITEM_FAST(percent, MSG_FAN_SPEED " 2", &thermalManager.lcd_tmpfan_speed[1], 0, 255, thermalManager.lcd_setFanSpeed1); #if ENABLED(EXTRA_FAN_SPEED) - MENU_MULTIPLIER_ITEM_EDIT(percent, MSG_EXTRA_FAN_SPEED " 2", &thermalManager.new_fan_speed[1], 3, 255); + EDIT_ITEM_FAST(percent, MSG_EXTRA_FAN_SPEED " 2", &thermalManager.new_fan_speed[1], 3, 255); #endif #endif #if HAS_FAN2 || (ENABLED(SINGLENOZZLE) && EXTRUDERS > 2) - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(percent, MSG_FAN_SPEED " 3", &thermalManager.lcd_tmpfan_speed[2], 0, 255, thermalManager.lcd_setFanSpeed2); + EDIT_ITEM_FAST(percent, MSG_FAN_SPEED " 3", &thermalManager.lcd_tmpfan_speed[2], 0, 255, thermalManager.lcd_setFanSpeed2); #if ENABLED(EXTRA_FAN_SPEED) - MENU_MULTIPLIER_ITEM_EDIT(percent, MSG_EXTRA_FAN_SPEED " 3", &thermalManager.new_fan_speed[2], 3, 255); + EDIT_ITEM_FAST(percent, MSG_EXTRA_FAN_SPEED " 3", &thermalManager.new_fan_speed[2], 3, 255); #endif #endif #endif // FAN_COUNT > 0 @@ -385,11 +385,11 @@ void menu_temperature() { // Preheat for Material 1 and 2 // #if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_3 != 0 || TEMP_SENSOR_4 != 0 || TEMP_SENSOR_5 != 0 || HAS_HEATED_BED - MENU_ITEM(submenu, MSG_PREHEAT_1, menu_preheat_m1); - MENU_ITEM(submenu, MSG_PREHEAT_2, menu_preheat_m2); + SUBMENU(MSG_PREHEAT_1, menu_preheat_m1); + SUBMENU(MSG_PREHEAT_2, menu_preheat_m2); #else - MENU_ITEM(function, MSG_PREHEAT_1, lcd_preheat_m1_e0_only); - MENU_ITEM(function, MSG_PREHEAT_2, lcd_preheat_m2_e0_only); + ACTION_ITEM(MSG_PREHEAT_1, lcd_preheat_m1_e0_only); + ACTION_ITEM(MSG_PREHEAT_2, lcd_preheat_m2_e0_only); #endif // @@ -400,7 +400,7 @@ void menu_temperature() { #if HAS_TEMP_BED if (thermalManager.temp_bed.target) has_heat = true; #endif - if (has_heat) MENU_ITEM(function, MSG_COOLDOWN, lcd_cooldown); + if (has_heat) ACTION_ITEM(MSG_COOLDOWN, lcd_cooldown); #endif // HAS_TEMP_HOTEND diff --git a/Marlin/src/lcd/menu/menu_tmc.cpp b/Marlin/src/lcd/menu/menu_tmc.cpp index 917b39ebfa..7f0b42643f 100644 --- a/Marlin/src/lcd/menu/menu_tmc.cpp +++ b/Marlin/src/lcd/menu/menu_tmc.cpp @@ -32,7 +32,7 @@ #include "../../module/stepper/indirection.h" #include "../../feature/tmc_util.h" -#define TMC_EDIT_STORED_I_RMS(ST,MSG) MENU_ITEM_EDIT_CALLBACK(uint16_4, MSG, &stepper##ST.val_mA, 100, 3000, refresh_stepper_current_##ST) +#define TMC_EDIT_STORED_I_RMS(ST,MSG) EDIT_ITEM(uint16_4, MSG, &stepper##ST.val_mA, 100, 3000, refresh_stepper_current_##ST) #if AXIS_IS_TMC(X) void refresh_stepper_current_X() { stepperX.refresh_stepper_current(); } @@ -76,7 +76,7 @@ void menu_tmc_current() { START_MENU(); - MENU_BACK(MSG_TMC_DRIVERS); + BACK_ITEM(MSG_TMC_DRIVERS); #if AXIS_IS_TMC(X) TMC_EDIT_STORED_I_RMS(X, MSG_X); #endif @@ -121,7 +121,7 @@ void menu_tmc_current() { #if ENABLED(HYBRID_THRESHOLD) - #define TMC_EDIT_STORED_HYBRID_THRS(ST, MSG) MENU_ITEM_EDIT_CALLBACK(uint8, MSG, &stepper##ST.stored.hybrid_thrs, 0, 255, refresh_hybrid_thrs_##ST); + #define TMC_EDIT_STORED_HYBRID_THRS(ST, MSG) EDIT_ITEM(uint8, MSG, &stepper##ST.stored.hybrid_thrs, 0, 255, refresh_hybrid_thrs_##ST); #if AXIS_HAS_STEALTHCHOP(X) void refresh_hybrid_thrs_X() { stepperX.refresh_hybrid_thrs(); } @@ -165,7 +165,7 @@ void menu_tmc_current() { void menu_tmc_hybrid_thrs() { START_MENU(); - MENU_BACK(MSG_TMC_DRIVERS); + BACK_ITEM(MSG_TMC_DRIVERS); #if AXIS_HAS_STEALTHCHOP(X) TMC_EDIT_STORED_HYBRID_THRS(X, MSG_X); #endif @@ -212,7 +212,7 @@ void menu_tmc_current() { #if ENABLED(SENSORLESS_HOMING) - #define TMC_EDIT_STORED_SGT(ST) MENU_ITEM_EDIT_CALLBACK(int4, MSG_##ST, &stepper##ST.stored.homing_thrs, stepper##ST.sgt_min, stepper##ST.sgt_max, refresh_homing_thrs_##ST); + #define TMC_EDIT_STORED_SGT(ST) EDIT_ITEM(int4, MSG_##ST, &stepper##ST.stored.homing_thrs, stepper##ST.sgt_min, stepper##ST.sgt_max, refresh_homing_thrs_##ST); #if X_SENSORLESS void refresh_homing_thrs_X() { stepperX.refresh_homing_thrs(); } @@ -229,7 +229,7 @@ void menu_tmc_current() { void menu_tmc_homing_thrs() { START_MENU(); - MENU_BACK(MSG_TMC_DRIVERS); + BACK_ITEM(MSG_TMC_DRIVERS); #if X_SENSORLESS TMC_EDIT_STORED_SGT(X); #endif @@ -249,7 +249,7 @@ void menu_tmc_current() { #if HAS_STEALTHCHOP - #define TMC_EDIT_STEP_MODE(ST, MSG) MENU_ITEM_EDIT_CALLBACK(bool, MSG, &stepper##ST.stored.stealthChop_enabled, refresh_stepping_mode_##ST) + #define TMC_EDIT_STEP_MODE(ST, MSG) EDIT_ITEM(bool, MSG, &stepper##ST.stored.stealthChop_enabled, refresh_stepping_mode_##ST) #if AXIS_HAS_STEALTHCHOP(X) void refresh_stepping_mode_X() { stepperX.refresh_stepping_mode(); } @@ -294,7 +294,7 @@ void menu_tmc_current() { void menu_tmc_step_mode() { START_MENU(); STATIC_ITEM(MSG_TMC_STEALTH_ENABLED); - MENU_BACK(MSG_TMC_DRIVERS); + BACK_ITEM(MSG_TMC_DRIVERS); #if AXIS_HAS_STEALTHCHOP(X) TMC_EDIT_STEP_MODE(X, MSG_X); #endif @@ -341,16 +341,16 @@ void menu_tmc_current() { void menu_tmc() { START_MENU(); - MENU_BACK(MSG_CONTROL); - MENU_ITEM(submenu, MSG_TMC_CURRENT, menu_tmc_current); + BACK_ITEM(MSG_CONTROL); + SUBMENU(MSG_TMC_CURRENT, menu_tmc_current); #if ENABLED(HYBRID_THRESHOLD) - MENU_ITEM(submenu, MSG_TMC_HYBRID_THRS, menu_tmc_hybrid_thrs); + SUBMENU(MSG_TMC_HYBRID_THRS, menu_tmc_hybrid_thrs); #endif #if ENABLED(SENSORLESS_HOMING) - MENU_ITEM(submenu, MSG_TMC_HOMING_THRS, menu_tmc_homing_thrs); + SUBMENU(MSG_TMC_HOMING_THRS, menu_tmc_homing_thrs); #endif #if HAS_STEALTHCHOP - MENU_ITEM(submenu, MSG_TMC_STEPPING_MODE, menu_tmc_step_mode); + SUBMENU(MSG_TMC_STEPPING_MODE, menu_tmc_step_mode); #endif END_MENU(); } diff --git a/Marlin/src/lcd/menu/menu_tune.cpp b/Marlin/src/lcd/menu/menu_tune.cpp index 3198e6a1b1..7c87a831c0 100644 --- a/Marlin/src/lcd/menu/menu_tune.cpp +++ b/Marlin/src/lcd/menu/menu_tune.cpp @@ -124,18 +124,18 @@ void menu_tune() { START_MENU(); - MENU_BACK(MSG_MAIN); + BACK_ITEM(MSG_MAIN); // // Speed: // - MENU_ITEM_EDIT(int3, MSG_SPEED, &feedrate_percentage, 10, 999); + EDIT_ITEM(int3, MSG_SPEED, &feedrate_percentage, 10, 999); // // Manual bed leveling, Bed Z: // #if BOTH(MESH_BED_LEVELING, LCD_BED_LEVELING) - MENU_ITEM_EDIT(float43, MSG_BED_Z, &mbl.z_offset, -1, 1); + EDIT_ITEM(float43, MSG_BED_Z, &mbl.z_offset, -1, 1); #endif // @@ -143,9 +143,9 @@ void menu_tune() { // Nozzle [1-4]: // #if HOTENDS == 1 - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE, &thermalManager.temp_hotend[0].target, 0, HEATER_0_MAXTEMP - 15, thermalManager.start_watching_E0); + EDIT_ITEM_FAST(int3, MSG_NOZZLE, &thermalManager.temp_hotend[0].target, 0, HEATER_0_MAXTEMP - 15, thermalManager.start_watching_E0); #elif HOTENDS > 1 - #define EDIT_NOZZLE(N) MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE MSG_LCD_N##N, &thermalManager.temp_hotend[N].target, 0, HEATER_##N##_MAXTEMP - 15, thermalManager.start_watching_E##N) + #define EDIT_NOZZLE(N) EDIT_ITEM_FAST(int3, MSG_NOZZLE MSG_LCD_N##N, &thermalManager.temp_hotend[N].target, 0, HEATER_##N##_MAXTEMP - 15, thermalManager.start_watching_E##N) EDIT_NOZZLE(0); EDIT_NOZZLE(1); #if HOTENDS > 2 @@ -163,14 +163,14 @@ void menu_tune() { #endif // HOTENDS > 1 #if ENABLED(SINGLENOZZLE) - MENU_MULTIPLIER_ITEM_EDIT(uint16_3, MSG_NOZZLE_STANDBY, &singlenozzle_temp[active_extruder ? 0 : 1], 0, HEATER_0_MAXTEMP - 15); + EDIT_ITEM_FAST(uint16_3, MSG_NOZZLE_STANDBY, &singlenozzle_temp[active_extruder ? 0 : 1], 0, HEATER_0_MAXTEMP - 15); #endif // // Bed: // #if HAS_HEATED_BED - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_BED, &thermalManager.temp_bed.target, 0, BED_MAXTEMP - 10, thermalManager.start_watching_bed); + EDIT_ITEM_FAST(int3, MSG_BED, &thermalManager.temp_bed.target, 0, BED_MAXTEMP - 10, thermalManager.start_watching_bed); #endif // @@ -178,21 +178,21 @@ void menu_tune() { // #if FAN_COUNT > 0 #if HAS_FAN0 - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(uint8, MSG_FAN_SPEED FAN_SPEED_1_SUFFIX, &thermalManager.lcd_tmpfan_speed[0], 0, 255, thermalManager.lcd_setFanSpeed0); + EDIT_ITEM_FAST(uint8, MSG_FAN_SPEED FAN_SPEED_1_SUFFIX, &thermalManager.lcd_tmpfan_speed[0], 0, 255, thermalManager.lcd_setFanSpeed0); #if ENABLED(EXTRA_FAN_SPEED) - MENU_MULTIPLIER_ITEM_EDIT(uint8, MSG_EXTRA_FAN_SPEED FAN_SPEED_1_SUFFIX, &thermalManager.new_fan_speed[0], 3, 255); + EDIT_ITEM_FAST(uint8, MSG_EXTRA_FAN_SPEED FAN_SPEED_1_SUFFIX, &thermalManager.new_fan_speed[0], 3, 255); #endif #endif #if HAS_FAN1 || (ENABLED(SINGLENOZZLE) && EXTRUDERS > 1) - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(uint8, MSG_FAN_SPEED " 2", &thermalManager.lcd_tmpfan_speed[1], 0, 255, thermalManager.lcd_setFanSpeed1); + EDIT_ITEM_FAST(uint8, MSG_FAN_SPEED " 2", &thermalManager.lcd_tmpfan_speed[1], 0, 255, thermalManager.lcd_setFanSpeed1); #if ENABLED(EXTRA_FAN_SPEED) - MENU_MULTIPLIER_ITEM_EDIT(uint8, MSG_EXTRA_FAN_SPEED " 2", &thermalManager.new_fan_speed[1], 3, 255); + EDIT_ITEM_FAST(uint8, MSG_EXTRA_FAN_SPEED " 2", &thermalManager.new_fan_speed[1], 3, 255); #endif #endif #if HAS_FAN2 || (ENABLED(SINGLENOZZLE) && EXTRUDERS > 2) - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(uint8, MSG_FAN_SPEED " 3", &thermalManager.lcd_tmpfan_speed[2], 0, 255, thermalManager.lcd_setFanSpeed2); + EDIT_ITEM_FAST(uint8, MSG_FAN_SPEED " 3", &thermalManager.lcd_tmpfan_speed[2], 0, 255, thermalManager.lcd_setFanSpeed2); #if ENABLED(EXTRA_FAN_SPEED) - MENU_MULTIPLIER_ITEM_EDIT(uint8, MSG_EXTRA_FAN_SPEED " 3", &thermalManager.new_fan_speed[2], 3, 255); + EDIT_ITEM_FAST(uint8, MSG_EXTRA_FAN_SPEED " 3", &thermalManager.new_fan_speed[2], 3, 255); #endif #endif #endif // FAN_COUNT > 0 @@ -202,10 +202,10 @@ void menu_tune() { // Flow [1-5]: // #if EXTRUDERS == 1 - MENU_ITEM_EDIT_CALLBACK(int3, MSG_FLOW, &planner.flow_percentage[0], 10, 999, _lcd_refresh_e_factor_0); + EDIT_ITEM(int3, MSG_FLOW, &planner.flow_percentage[0], 10, 999, _lcd_refresh_e_factor_0); #elif EXTRUDERS - MENU_ITEM_EDIT_CALLBACK(int3, MSG_FLOW, &planner.flow_percentage[active_extruder], 10, 999, _lcd_refresh_e_factor); - #define EDIT_FLOW(N) MENU_ITEM_EDIT_CALLBACK(int3, MSG_FLOW MSG_LCD_N##N, &planner.flow_percentage[N], 10, 999, _lcd_refresh_e_factor_##N) + EDIT_ITEM(int3, MSG_FLOW, &planner.flow_percentage[active_extruder], 10, 999, _lcd_refresh_e_factor); + #define EDIT_FLOW(N) EDIT_ITEM(int3, MSG_FLOW MSG_LCD_N##N, &planner.flow_percentage[N], 10, 999, _lcd_refresh_e_factor_##N) EDIT_FLOW(0); EDIT_FLOW(1); #if EXTRUDERS > 2 @@ -229,13 +229,13 @@ void menu_tune() { // #if ENABLED(BABYSTEPPING) #if ENABLED(BABYSTEP_XY) - MENU_ITEM(submenu, MSG_BABYSTEP_X, lcd_babystep_x); - MENU_ITEM(submenu, MSG_BABYSTEP_Y, lcd_babystep_y); + SUBMENU(MSG_BABYSTEP_X, lcd_babystep_x); + SUBMENU(MSG_BABYSTEP_Y, lcd_babystep_y); #endif #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - MENU_ITEM(submenu, MSG_ZPROBE_ZOFFSET, lcd_babystep_zoffset); + SUBMENU(MSG_ZPROBE_ZOFFSET, lcd_babystep_zoffset); #else - MENU_ITEM(submenu, MSG_BABYSTEP_Z, lcd_babystep_z); + SUBMENU(MSG_BABYSTEP_Z, lcd_babystep_z); #endif #endif diff --git a/Marlin/src/lcd/menu/menu_ubl.cpp b/Marlin/src/lcd/menu/menu_ubl.cpp index 4065d53094..ac52537594 100644 --- a/Marlin/src/lcd/menu/menu_ubl.cpp +++ b/Marlin/src/lcd/menu/menu_ubl.cpp @@ -127,12 +127,12 @@ void _lcd_ubl_build_custom_mesh() { */ void _lcd_ubl_custom_mesh() { START_MENU(); - MENU_BACK(MSG_UBL_BUILD_MESH_MENU); - MENU_ITEM_EDIT(int3, MSG_UBL_HOTEND_TEMP_CUSTOM, &custom_hotend_temp, EXTRUDE_MINTEMP, (HEATER_0_MAXTEMP - 10)); + BACK_ITEM(MSG_UBL_BUILD_MESH_MENU); + EDIT_ITEM(int3, MSG_UBL_HOTEND_TEMP_CUSTOM, &custom_hotend_temp, EXTRUDE_MINTEMP, (HEATER_0_MAXTEMP - 10)); #if HAS_HEATED_BED - MENU_ITEM_EDIT(int3, MSG_UBL_BED_TEMP_CUSTOM, &custom_bed_temp, BED_MINTEMP, (BED_MAXTEMP - 10)); + EDIT_ITEM(int3, MSG_UBL_BED_TEMP_CUSTOM, &custom_bed_temp, BED_MINTEMP, (BED_MAXTEMP - 10)); #endif - MENU_ITEM(function, MSG_UBL_BUILD_CUSTOM_MESH, _lcd_ubl_build_custom_mesh); + ACTION_ITEM(MSG_UBL_BUILD_CUSTOM_MESH, _lcd_ubl_build_custom_mesh); END_MENU(); } @@ -157,9 +157,9 @@ void _lcd_ubl_adjust_height_cmd() { */ void _menu_ubl_height_adjust() { START_MENU(); - MENU_BACK(MSG_EDIT_MESH); - MENU_ITEM_EDIT_CALLBACK(int3, MSG_UBL_MESH_HEIGHT_AMOUNT, &ubl_height_amount, -9, 9, _lcd_ubl_adjust_height_cmd); - MENU_ITEM(function, MSG_WATCH, ui.return_to_status); + BACK_ITEM(MSG_EDIT_MESH); + EDIT_ITEM(int3, MSG_UBL_MESH_HEIGHT_AMOUNT, &ubl_height_amount, -9, 9, _lcd_ubl_adjust_height_cmd); + ACTION_ITEM(MSG_WATCH, ui.return_to_status); END_MENU(); } @@ -174,11 +174,11 @@ void _menu_ubl_height_adjust() { */ void _lcd_ubl_edit_mesh() { START_MENU(); - MENU_BACK(MSG_UBL_TOOLS); - MENU_ITEM(gcode, MSG_UBL_FINE_TUNE_ALL, PSTR("G29 P4 R999 T")); - MENU_ITEM(gcode, MSG_UBL_FINE_TUNE_CLOSEST, PSTR("G29 P4 T")); - MENU_ITEM(submenu, MSG_UBL_MESH_HEIGHT_ADJUST, _menu_ubl_height_adjust); - MENU_ITEM(function, MSG_WATCH, ui.return_to_status); + BACK_ITEM(MSG_UBL_TOOLS); + GCODES_ITEM(MSG_UBL_FINE_TUNE_ALL, PSTR("G29 P4 R999 T")); + GCODES_ITEM(MSG_UBL_FINE_TUNE_CLOSEST, PSTR("G29 P4 T")); + SUBMENU(MSG_UBL_MESH_HEIGHT_ADJUST, _menu_ubl_height_adjust); + ACTION_ITEM(MSG_WATCH, ui.return_to_status); END_MENU(); } @@ -210,16 +210,16 @@ void _lcd_ubl_validate_custom_mesh() { */ void _lcd_ubl_validate_mesh() { START_MENU(); - MENU_BACK(MSG_UBL_TOOLS); + BACK_ITEM(MSG_UBL_TOOLS); #if HAS_HEATED_BED - MENU_ITEM(gcode, MSG_UBL_VALIDATE_MESH_M1, PSTR("G28\nG26 C B" STRINGIFY(PREHEAT_1_TEMP_BED) " H" STRINGIFY(PREHEAT_1_TEMP_HOTEND) " P")); - MENU_ITEM(gcode, MSG_UBL_VALIDATE_MESH_M2, PSTR("G28\nG26 C B" STRINGIFY(PREHEAT_2_TEMP_BED) " H" STRINGIFY(PREHEAT_2_TEMP_HOTEND) " P")); + GCODES_ITEM(MSG_UBL_VALIDATE_MESH_M1, PSTR("G28\nG26 C B" STRINGIFY(PREHEAT_1_TEMP_BED) " H" STRINGIFY(PREHEAT_1_TEMP_HOTEND) " P")); + GCODES_ITEM(MSG_UBL_VALIDATE_MESH_M2, PSTR("G28\nG26 C B" STRINGIFY(PREHEAT_2_TEMP_BED) " H" STRINGIFY(PREHEAT_2_TEMP_HOTEND) " P")); #else - MENU_ITEM(gcode, MSG_UBL_VALIDATE_MESH_M1, PSTR("G28\nG26 C B0 H" STRINGIFY(PREHEAT_1_TEMP_HOTEND) " P")); - MENU_ITEM(gcode, MSG_UBL_VALIDATE_MESH_M2, PSTR("G28\nG26 C B0 H" STRINGIFY(PREHEAT_2_TEMP_HOTEND) " P")); + GCODES_ITEM(MSG_UBL_VALIDATE_MESH_M1, PSTR("G28\nG26 C B0 H" STRINGIFY(PREHEAT_1_TEMP_HOTEND) " P")); + GCODES_ITEM(MSG_UBL_VALIDATE_MESH_M2, PSTR("G28\nG26 C B0 H" STRINGIFY(PREHEAT_2_TEMP_HOTEND) " P")); #endif - MENU_ITEM(function, MSG_UBL_VALIDATE_CUSTOM_MESH, _lcd_ubl_validate_custom_mesh); - MENU_ITEM(function, MSG_WATCH, ui.return_to_status); + ACTION_ITEM(MSG_UBL_VALIDATE_CUSTOM_MESH, _lcd_ubl_validate_custom_mesh); + ACTION_ITEM(MSG_WATCH, ui.return_to_status); END_MENU(); } @@ -241,9 +241,9 @@ void _lcd_ubl_grid_level_cmd() { */ void _lcd_ubl_grid_level() { START_MENU(); - MENU_BACK(MSG_UBL_TOOLS); - MENU_ITEM_EDIT(int3, MSG_UBL_SIDE_POINTS, &side_points, 2, 6); - MENU_ITEM(function, MSG_UBL_MESH_LEVEL, _lcd_ubl_grid_level_cmd); + BACK_ITEM(MSG_UBL_TOOLS); + EDIT_ITEM(int3, MSG_UBL_SIDE_POINTS, &side_points, 2, 6); + ACTION_ITEM(MSG_UBL_MESH_LEVEL, _lcd_ubl_grid_level_cmd); END_MENU(); } @@ -257,10 +257,10 @@ void _lcd_ubl_grid_level() { */ void _lcd_ubl_mesh_leveling() { START_MENU(); - MENU_BACK(MSG_UBL_TOOLS); - MENU_ITEM(gcode, MSG_UBL_3POINT_MESH_LEVELING, PSTR("G29 J0")); - MENU_ITEM(submenu, MSG_UBL_GRID_MESH_LEVELING, _lcd_ubl_grid_level); - MENU_ITEM(function, MSG_WATCH, ui.return_to_status); + BACK_ITEM(MSG_UBL_TOOLS); + GCODES_ITEM(MSG_UBL_3POINT_MESH_LEVELING, PSTR("G29 J0")); + SUBMENU(MSG_UBL_GRID_MESH_LEVELING, _lcd_ubl_grid_level); + ACTION_ITEM(MSG_WATCH, ui.return_to_status); END_MENU(); } @@ -285,11 +285,11 @@ void _lcd_ubl_fillin_amount_cmd() { */ void _menu_ubl_fillin() { START_MENU(); - MENU_BACK(MSG_UBL_BUILD_MESH_MENU); - MENU_ITEM_EDIT_CALLBACK(int3, MSG_UBL_FILLIN_AMOUNT, &ubl_fillin_amount, 0, 9, _lcd_ubl_fillin_amount_cmd); - MENU_ITEM(gcode, MSG_UBL_SMART_FILLIN, PSTR("G29 P3 T0")); - MENU_ITEM(gcode, MSG_UBL_MANUAL_FILLIN, PSTR("G29 P2 B T0")); - MENU_ITEM(function, MSG_WATCH, ui.return_to_status); + BACK_ITEM(MSG_UBL_BUILD_MESH_MENU); + EDIT_ITEM(int3, MSG_UBL_FILLIN_AMOUNT, &ubl_fillin_amount, 0, 9, _lcd_ubl_fillin_amount_cmd); + GCODES_ITEM(MSG_UBL_SMART_FILLIN, PSTR("G29 P3 T0")); + GCODES_ITEM(MSG_UBL_MANUAL_FILLIN, PSTR("G29 P2 B T0")); + ACTION_ITEM(MSG_WATCH, ui.return_to_status); END_MENU(); } @@ -314,9 +314,9 @@ void _lcd_ubl_invalidate() { */ void _lcd_ubl_build_mesh() { START_MENU(); - MENU_BACK(MSG_UBL_TOOLS); + BACK_ITEM(MSG_UBL_TOOLS); #if HAS_HEATED_BED - MENU_ITEM(gcode, MSG_UBL_BUILD_MESH_M1, PSTR( + GCODES_ITEM(MSG_UBL_BUILD_MESH_M1, PSTR( "G28\n" "M190 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\n" "M109 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) "\n" @@ -324,7 +324,7 @@ void _lcd_ubl_build_mesh() { "M104 S0\n" "M140 S0" )); - MENU_ITEM(gcode, MSG_UBL_BUILD_MESH_M2, PSTR( + GCODES_ITEM(MSG_UBL_BUILD_MESH_M2, PSTR( "G28\n" "M190 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\n" "M109 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) "\n" @@ -333,26 +333,26 @@ void _lcd_ubl_build_mesh() { "M140 S0" )); #else - MENU_ITEM(gcode, MSG_UBL_BUILD_MESH_M1, PSTR( + GCODES_ITEM(MSG_UBL_BUILD_MESH_M1, PSTR( "G28\n" "M109 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) "\n" "G29 P1\n" "M104 S0" )); - MENU_ITEM(gcode, MSG_UBL_BUILD_MESH_M2, PSTR( + GCODES_ITEM(MSG_UBL_BUILD_MESH_M2, PSTR( "G28\n" "M109 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) "\n" "G29 P1\n" "M104 S0" )); #endif - MENU_ITEM(submenu, MSG_UBL_BUILD_CUSTOM_MESH, _lcd_ubl_custom_mesh); - MENU_ITEM(gcode, MSG_UBL_BUILD_COLD_MESH, PSTR("G28\nG29 P1")); - MENU_ITEM(submenu, MSG_UBL_FILLIN_MESH, _menu_ubl_fillin); - MENU_ITEM(gcode, MSG_UBL_CONTINUE_MESH, PSTR("G29 P1 C")); - MENU_ITEM(function, MSG_UBL_INVALIDATE_ALL, _lcd_ubl_invalidate); - MENU_ITEM(gcode, MSG_UBL_INVALIDATE_CLOSEST, PSTR("G29 I")); - MENU_ITEM(function, MSG_WATCH, ui.return_to_status); + SUBMENU(MSG_UBL_BUILD_CUSTOM_MESH, _lcd_ubl_custom_mesh); + GCODES_ITEM(MSG_UBL_BUILD_COLD_MESH, PSTR("G28\nG29 P1")); + SUBMENU(MSG_UBL_FILLIN_MESH, _menu_ubl_fillin); + GCODES_ITEM(MSG_UBL_CONTINUE_MESH, PSTR("G29 P1 C")); + ACTION_ITEM(MSG_UBL_INVALIDATE_ALL, _lcd_ubl_invalidate); + GCODES_ITEM(MSG_UBL_INVALIDATE_CLOSEST, PSTR("G29 I")); + ACTION_ITEM(MSG_WATCH, ui.return_to_status); END_MENU(); } @@ -389,14 +389,14 @@ void _lcd_ubl_save_mesh_cmd() { void _lcd_ubl_storage_mesh() { int16_t a = settings.calc_num_meshes(); START_MENU(); - MENU_BACK(MSG_UBL_LEVEL_BED); + BACK_ITEM(MSG_UBL_LEVEL_BED); if (!WITHIN(ubl_storage_slot, 0, a - 1)) { STATIC_ITEM(MSG_UBL_NO_STORAGE); } else { - MENU_ITEM_EDIT(int3, MSG_UBL_STORAGE_SLOT, &ubl_storage_slot, 0, a - 1); - MENU_ITEM(function, MSG_UBL_LOAD_MESH, _lcd_ubl_load_mesh_cmd); - MENU_ITEM(function, MSG_UBL_SAVE_MESH, _lcd_ubl_save_mesh_cmd); + EDIT_ITEM(int3, MSG_UBL_STORAGE_SLOT, &ubl_storage_slot, 0, a - 1); + ACTION_ITEM(MSG_UBL_LOAD_MESH, _lcd_ubl_load_mesh_cmd); + ACTION_ITEM(MSG_UBL_SAVE_MESH, _lcd_ubl_save_mesh_cmd); } END_MENU(); } @@ -540,11 +540,11 @@ void _lcd_ubl_output_map_lcd_cmd() { */ void _lcd_ubl_output_map() { START_MENU(); - MENU_BACK(MSG_UBL_LEVEL_BED); - MENU_ITEM(gcode, MSG_UBL_OUTPUT_MAP_HOST, PSTR("G29 T0")); - MENU_ITEM(gcode, MSG_UBL_OUTPUT_MAP_CSV, PSTR("G29 T1")); - MENU_ITEM(gcode, MSG_UBL_OUTPUT_MAP_BACKUP, PSTR("G29 S-1")); - MENU_ITEM(function, MSG_UBL_OUTPUT_MAP, _lcd_ubl_output_map_lcd_cmd); + BACK_ITEM(MSG_UBL_LEVEL_BED); + GCODES_ITEM(MSG_UBL_OUTPUT_MAP_HOST, PSTR("G29 T0")); + GCODES_ITEM(MSG_UBL_OUTPUT_MAP_CSV, PSTR("G29 T1")); + GCODES_ITEM(MSG_UBL_OUTPUT_MAP_BACKUP, PSTR("G29 S-1")); + ACTION_ITEM(MSG_UBL_OUTPUT_MAP, _lcd_ubl_output_map_lcd_cmd); END_MENU(); } @@ -559,12 +559,12 @@ void _lcd_ubl_output_map() { */ void _menu_ubl_tools() { START_MENU(); - MENU_BACK(MSG_UBL_LEVEL_BED); - MENU_ITEM(submenu, MSG_UBL_BUILD_MESH_MENU, _lcd_ubl_build_mesh); - MENU_ITEM(gcode, MSG_UBL_MANUAL_MESH, PSTR("G29 I999\nG29 P2 B T0")); - MENU_ITEM(submenu, MSG_UBL_VALIDATE_MESH_MENU, _lcd_ubl_validate_mesh); - MENU_ITEM(submenu, MSG_EDIT_MESH, _lcd_ubl_edit_mesh); - MENU_ITEM(submenu, MSG_UBL_MESH_LEVELING, _lcd_ubl_mesh_leveling); + BACK_ITEM(MSG_UBL_LEVEL_BED); + SUBMENU(MSG_UBL_BUILD_MESH_MENU, _lcd_ubl_build_mesh); + GCODES_ITEM(MSG_UBL_MANUAL_MESH, PSTR("G29 I999\nG29 P2 B T0")); + SUBMENU(MSG_UBL_VALIDATE_MESH_MENU, _lcd_ubl_validate_mesh); + SUBMENU(MSG_EDIT_MESH, _lcd_ubl_edit_mesh); + SUBMENU(MSG_UBL_MESH_LEVELING, _lcd_ubl_mesh_leveling); END_MENU(); } @@ -582,14 +582,14 @@ void _menu_ubl_tools() { */ void _lcd_ubl_step_by_step() { START_MENU(); - MENU_BACK(MSG_UBL_LEVEL_BED); - MENU_ITEM(gcode, "1 " MSG_UBL_BUILD_COLD_MESH, PSTR("G28\nG29 P1")); - MENU_ITEM(gcode, "2 " MSG_UBL_SMART_FILLIN, PSTR("G29 P3 T0")); - MENU_ITEM(submenu, "3 " MSG_UBL_VALIDATE_MESH_MENU, _lcd_ubl_validate_mesh); - MENU_ITEM(gcode, "4 " MSG_UBL_FINE_TUNE_ALL, PSTR("G29 P4 R999 T")); - MENU_ITEM(submenu, "5 " MSG_UBL_VALIDATE_MESH_MENU, _lcd_ubl_validate_mesh); - MENU_ITEM(gcode, "6 " MSG_UBL_FINE_TUNE_ALL, PSTR("G29 P4 R999 T")); - MENU_ITEM(function, "7 " MSG_UBL_SAVE_MESH, _lcd_ubl_save_mesh_cmd); + BACK_ITEM(MSG_UBL_LEVEL_BED); + GCODES_ITEM("1 " MSG_UBL_BUILD_COLD_MESH, PSTR("G28\nG29 P1")); + GCODES_ITEM("2 " MSG_UBL_SMART_FILLIN, PSTR("G29 P3 T0")); + SUBMENU("3 " MSG_UBL_VALIDATE_MESH_MENU, _lcd_ubl_validate_mesh); + GCODES_ITEM("4 " MSG_UBL_FINE_TUNE_ALL, PSTR("G29 P4 R999 T")); + SUBMENU("5 " MSG_UBL_VALIDATE_MESH_MENU, _lcd_ubl_validate_mesh); + GCODES_ITEM("6 " MSG_UBL_FINE_TUNE_ALL, PSTR("G29 P4 R999 T")); + ACTION_ITEM("7 " MSG_UBL_SAVE_MESH, _lcd_ubl_save_mesh_cmd); END_MENU(); } @@ -609,19 +609,19 @@ void _lcd_ubl_step_by_step() { void _lcd_ubl_level_bed() { START_MENU(); - MENU_BACK(MSG_MOTION); + BACK_ITEM(MSG_MOTION); if (planner.leveling_active) - MENU_ITEM(gcode, MSG_UBL_DEACTIVATE_MESH, PSTR("G29 D")); + GCODES_ITEM(MSG_UBL_DEACTIVATE_MESH, PSTR("G29 D")); else - MENU_ITEM(gcode, MSG_UBL_ACTIVATE_MESH, PSTR("G29 A")); - MENU_ITEM(submenu, MSG_UBL_STEP_BY_STEP_MENU, _lcd_ubl_step_by_step); - MENU_ITEM(function, MSG_UBL_MESH_EDIT, _lcd_ubl_output_map_lcd_cmd); - MENU_ITEM(submenu, MSG_UBL_STORAGE_MESH_MENU, _lcd_ubl_storage_mesh); - MENU_ITEM(submenu, MSG_UBL_OUTPUT_MAP, _lcd_ubl_output_map); - MENU_ITEM(submenu, MSG_UBL_TOOLS, _menu_ubl_tools); - MENU_ITEM(gcode, MSG_UBL_INFO_UBL, PSTR("G29 W")); + GCODES_ITEM(MSG_UBL_ACTIVATE_MESH, PSTR("G29 A")); + SUBMENU(MSG_UBL_STEP_BY_STEP_MENU, _lcd_ubl_step_by_step); + ACTION_ITEM(MSG_UBL_MESH_EDIT, _lcd_ubl_output_map_lcd_cmd); + SUBMENU(MSG_UBL_STORAGE_MESH_MENU, _lcd_ubl_storage_mesh); + SUBMENU(MSG_UBL_OUTPUT_MAP, _lcd_ubl_output_map); + SUBMENU(MSG_UBL_TOOLS, _menu_ubl_tools); + GCODES_ITEM(MSG_UBL_INFO_UBL, PSTR("G29 W")); #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float3, MSG_Z_FADE_HEIGHT, &lcd_z_fade_height, 0, 100, _lcd_set_z_fade_height); + EDIT_ITEM_FAST(float3, MSG_Z_FADE_HEIGHT, &lcd_z_fade_height, 0, 100, _lcd_set_z_fade_height); #endif END_MENU(); }