bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

♻️ Refactor axis counts and loops

Browse Source
This commit is contained in:
Scott Lahteine
2021-05-18 22:51:19 -05:00
committed by Scott Lahteine
parent f7d28ce1d6
commit 26a244325b
45 changed files with 178 additions and 165 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
Marlin/src/gcode/feature/L6470/M906.cpp
View File

@ -234,7 +234,7 @@ void GcodeSuite::M906() {
const uint8_t index = parser.byteval('I');
#endif
LOOP_XYZE(i) if (uint16_t value = parser.intval(axis_codes[i])) {
LOOP_LOGICAL_AXES(i) if (uint16_t value = parser.intval(axis_codes[i])) {
report_current = false;

6
Marlin/src/gcode/feature/digipot/M907-M910.cpp
View File

@ -44,7 +44,7 @@
void GcodeSuite::M907() {
#if HAS_MOTOR_CURRENT_SPI
LOOP_XYZE(i) if (parser.seenval(axis_codes[i])) stepper.set_digipot_current(i, parser.value_int());
LOOP_LOGICAL_AXES(i) if (parser.seenval(axis_codes[i])) stepper.set_digipot_current(i, parser.value_int());
if (parser.seenval('B')) stepper.set_digipot_current(4, parser.value_int());
if (parser.seenval('S')) LOOP_LE_N(i, 4) stepper.set_digipot_current(i, parser.value_int());
@ -64,7 +64,7 @@ void GcodeSuite::M907() {
#if HAS_MOTOR_CURRENT_I2C
// this one uses actual amps in floating point
LOOP_XYZE(i) if (parser.seenval(axis_codes[i])) digipot_i2c.set_current(i, parser.value_float());
LOOP_LOGICAL_AXES(i) if (parser.seenval(axis_codes[i])) digipot_i2c.set_current(i, parser.value_float());
// Additional extruders use B,C,D for channels 4,5,6.
// TODO: Change these parameters because 'E' is used. B<index>?
for (uint8_t i = E_AXIS + 1; i < DIGIPOT_I2C_NUM_CHANNELS; i++)
@ -76,7 +76,7 @@ void GcodeSuite::M907() {
const float dac_percent = parser.value_float();
LOOP_LE_N(i, 4) stepper_dac.set_current_percent(i, dac_percent);
}
LOOP_XYZE(i) if (parser.seenval(axis_codes[i])) stepper_dac.set_current_percent(i, parser.value_float());
LOOP_LOGICAL_AXES(i) if (parser.seenval(axis_codes[i])) stepper_dac.set_current_percent(i, parser.value_float());
#endif
}

6
Marlin/src/gcode/feature/pause/G61.cpp
View File

@ -71,11 +71,11 @@ void GcodeSuite::G61(void) {
else {
if (parser.seen("XYZ")) {
DEBUG_ECHOPAIR(STR_RESTORING_POS " S", slot);
LOOP_XYZ(i) {
destination[i] = parser.seen(XYZ_CHAR(i))
LOOP_LINEAR_AXES(i) {
destination[i] = parser.seen(AXIS_CHAR(i))
? stored_position[slot][i] + parser.value_axis_units((AxisEnum)i)
: current_position[i];
DEBUG_CHAR(' ', XYZ_CHAR(i));
DEBUG_CHAR(' ', AXIS_CHAR(i));
DEBUG_ECHO_F(destination[i]);
}
DEBUG_EOL();

6
Marlin/src/gcode/feature/trinamic/M122.cpp
View File

@ -32,12 +32,12 @@
* M122: Debug TMC drivers
*/
void GcodeSuite::M122() {
xyze_bool_t print_axis = ARRAY_N_1(XYZE, false);
xyze_bool_t print_axis = ARRAY_N_1(LOGICAL_AXES, false);
bool print_all = true;
LOOP_XYZE(i) if (parser.seen(axis_codes[i])) { print_axis[i] = true; print_all = false; }
LOOP_LOGICAL_AXES(i) if (parser.seen(axis_codes[i])) { print_axis[i] = true; print_all = false; }
if (print_all) LOOP_XYZE(i) print_axis[i] = true;
if (print_all) LOOP_LOGICAL_AXES(i) print_axis[i] = true;
if (parser.boolval('I')) restore_stepper_drivers();

2
Marlin/src/gcode/feature/trinamic/M569.cpp
View File

@ -50,7 +50,7 @@ static void set_stealth_status(const bool enable, const int8_t target_extruder)
const uint8_t index = parser.byteval('I');
#endif
LOOP_XYZE(i) if (parser.seen(axis_codes[i])) {
LOOP_LOGICAL_AXES(i) if (parser.seen(axis_codes[i])) {
switch (i) {
case X_AXIS:
#if AXIS_HAS_STEALTHCHOP(X)

2
Marlin/src/gcode/feature/trinamic/M906.cpp
View File

@ -52,7 +52,7 @@ void GcodeSuite::M906() {
const uint8_t index = parser.byteval('I');
#endif
LOOP_XYZE(i) if (uint16_t value = parser.intval(axis_codes[i])) {
LOOP_LOGICAL_AXES(i) if (uint16_t value = parser.intval(axis_codes[i])) {
report = false;
switch (i) {
case X_AXIS:

4
Marlin/src/gcode/feature/trinamic/M911-M914.cpp
View File

@ -209,7 +209,7 @@
#if AXIS_IS_TMC(X) || AXIS_IS_TMC(X2) || AXIS_IS_TMC(Y) || AXIS_IS_TMC(Y2) || AXIS_IS_TMC(Z) || AXIS_IS_TMC(Z2) || AXIS_IS_TMC(Z3) || AXIS_IS_TMC(Z4)
const uint8_t index = parser.byteval('I');
#endif
LOOP_XYZE(i) if (int32_t value = parser.longval(axis_codes[i])) {
LOOP_LOGICAL_AXES(i) if (int32_t value = parser.longval(axis_codes[i])) {
report = false;
switch (i) {
case X_AXIS:
@ -338,7 +338,7 @@
bool report = true;
const uint8_t index = parser.byteval('I');
LOOP_XYZ(i) if (parser.seen(XYZ_CHAR(i))) {
LOOP_LINEAR_AXES(i) if (parser.seen(AXIS_CHAR(i))) {
const int16_t value = parser.value_int();
report = false;
switch (i) {