added arduino ide GEN7 support Files
This commit is contained in:
203
Marlin/Gen7/cores/arduino/wiring.c
Normal file
203
Marlin/Gen7/cores/arduino/wiring.c
Normal file
@ -0,0 +1,203 @@
|
||||
/*
|
||||
wiring.c - Partial implementation of the Wiring API for the ATmega8.
|
||||
Part of Arduino - http://www.arduino.cc/
|
||||
|
||||
Copyright (c) 2005-2006 David A. Mellis
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General
|
||||
Public License along with this library; if not, write to the
|
||||
Free Software Foundation, Inc., 59 Temple Place, Suite 330,
|
||||
Boston, MA 02111-1307 USA
|
||||
|
||||
$Id: wiring.c 388 2008-03-08 22:05:23Z mellis $
|
||||
*/
|
||||
|
||||
#include "wiring_private.h"
|
||||
|
||||
volatile unsigned long timer0_overflow_count = 0;
|
||||
volatile unsigned long timer0_clock_cycles = 0;
|
||||
volatile unsigned long timer0_millis = 0;
|
||||
|
||||
SIGNAL(TIMER0_OVF_vect)
|
||||
{
|
||||
timer0_overflow_count++;
|
||||
// timer 0 prescale factor is 64 and the timer overflows at 256
|
||||
timer0_clock_cycles += 64UL * 256UL;
|
||||
while (timer0_clock_cycles > clockCyclesPerMicrosecond() * 1000UL) {
|
||||
timer0_clock_cycles -= clockCyclesPerMicrosecond() * 1000UL;
|
||||
timer0_millis++;
|
||||
}
|
||||
}
|
||||
|
||||
unsigned long millis()
|
||||
{
|
||||
unsigned long m;
|
||||
uint8_t oldSREG = SREG;
|
||||
|
||||
// disable interrupts while we read timer0_millis or we might get an
|
||||
// inconsistent value (e.g. in the middle of the timer0_millis++)
|
||||
cli();
|
||||
m = timer0_millis;
|
||||
SREG = oldSREG;
|
||||
|
||||
return m;
|
||||
}
|
||||
|
||||
unsigned long micros() {
|
||||
unsigned long m, t;
|
||||
uint8_t oldSREG = SREG;
|
||||
|
||||
cli();
|
||||
t = TCNT0;
|
||||
|
||||
#ifdef TIFR0
|
||||
if ((TIFR0 & _BV(TOV0)) && (t == 0))
|
||||
t = 256;
|
||||
#else
|
||||
if ((TIFR & _BV(TOV0)) && (t == 0))
|
||||
t = 256;
|
||||
#endif
|
||||
|
||||
m = timer0_overflow_count;
|
||||
SREG = oldSREG;
|
||||
|
||||
return ((m << 8) + t) * (64 / clockCyclesPerMicrosecond());
|
||||
}
|
||||
|
||||
void delay(unsigned long ms)
|
||||
{
|
||||
unsigned long start = millis();
|
||||
|
||||
while (millis() - start <= ms)
|
||||
;
|
||||
}
|
||||
|
||||
/* Delay for the given number of microseconds. Assumes a 8 or 16 MHz clock.
|
||||
* Disables interrupts, which will disrupt the millis() function if used
|
||||
* too frequently. */
|
||||
void delayMicroseconds(unsigned int us)
|
||||
{
|
||||
uint8_t oldSREG;
|
||||
|
||||
// calling avrlib's delay_us() function with low values (e.g. 1 or
|
||||
// 2 microseconds) gives delays longer than desired.
|
||||
//delay_us(us);
|
||||
|
||||
#if F_CPU >= 16000000L
|
||||
// for the 16 MHz clock on most Arduino boards
|
||||
|
||||
// for a one-microsecond delay, simply return. the overhead
|
||||
// of the function call yields a delay of approximately 1 1/8 us.
|
||||
if (--us == 0)
|
||||
return;
|
||||
|
||||
// the following loop takes a quarter of a microsecond (4 cycles)
|
||||
// per iteration, so execute it four times for each microsecond of
|
||||
// delay requested.
|
||||
us <<= 2;
|
||||
|
||||
// account for the time taken in the preceeding commands.
|
||||
us -= 2;
|
||||
#else
|
||||
// for the 8 MHz internal clock on the ATmega168
|
||||
|
||||
// for a one- or two-microsecond delay, simply return. the overhead of
|
||||
// the function calls takes more than two microseconds. can't just
|
||||
// subtract two, since us is unsigned; we'd overflow.
|
||||
if (--us == 0)
|
||||
return;
|
||||
if (--us == 0)
|
||||
return;
|
||||
|
||||
// the following loop takes half of a microsecond (4 cycles)
|
||||
// per iteration, so execute it twice for each microsecond of
|
||||
// delay requested.
|
||||
us <<= 1;
|
||||
|
||||
// partially compensate for the time taken by the preceeding commands.
|
||||
// we can't subtract any more than this or we'd overflow w/ small delays.
|
||||
us--;
|
||||
#endif
|
||||
|
||||
// disable interrupts, otherwise the timer 0 overflow interrupt that
|
||||
// tracks milliseconds will make us delay longer than we want.
|
||||
oldSREG = SREG;
|
||||
cli();
|
||||
|
||||
// busy wait
|
||||
__asm__ __volatile__ (
|
||||
"1: sbiw %0,1" "\n\t" // 2 cycles
|
||||
"brne 1b" : "=w" (us) : "0" (us) // 2 cycles
|
||||
);
|
||||
|
||||
// reenable interrupts.
|
||||
SREG = oldSREG;
|
||||
}
|
||||
|
||||
void init()
|
||||
{
|
||||
// this needs to be called before setup() or some functions won't
|
||||
// work there
|
||||
sei();
|
||||
|
||||
// on the ATmega168, timer 0 is also used for fast hardware pwm
|
||||
// (using phase-correct PWM would mean that timer 0 overflowed half as often
|
||||
// resulting in different millis() behavior on the ATmega8 and ATmega168)
|
||||
sbi(TCCR0A, WGM01);
|
||||
sbi(TCCR0A, WGM00);
|
||||
|
||||
// set timer 0 prescale factor to 64
|
||||
sbi(TCCR0B, CS01);
|
||||
sbi(TCCR0B, CS00);
|
||||
|
||||
// enable timer 0 overflow interrupt
|
||||
sbi(TIMSK0, TOIE0);
|
||||
|
||||
// timers 1 and 2 are used for phase-correct hardware pwm
|
||||
// this is better for motors as it ensures an even waveform
|
||||
// note, however, that fast pwm mode can achieve a frequency of up
|
||||
// 8 MHz (with a 16 MHz clock) at 50% duty cycle
|
||||
|
||||
// set timer 1 prescale factor to 64
|
||||
sbi(TCCR1B, CS11);
|
||||
sbi(TCCR1B, CS10);
|
||||
|
||||
// put timer 1 in 8-bit phase correct pwm mode
|
||||
sbi(TCCR1A, WGM10);
|
||||
|
||||
// set timer 2 prescale factor to 64
|
||||
sbi(TCCR2B, CS22);
|
||||
|
||||
// configure timer 2 for phase correct pwm (8-bit)
|
||||
sbi(TCCR2A, WGM20);
|
||||
|
||||
// set a2d prescale factor to 128
|
||||
// 16 MHz / 128 = 125 KHz, inside the desired 50-200 KHz range.
|
||||
// XXX: this will not work properly for other clock speeds, and
|
||||
// this code should use F_CPU to determine the prescale factor.
|
||||
sbi(ADCSRA, ADPS2);
|
||||
sbi(ADCSRA, ADPS1);
|
||||
sbi(ADCSRA, ADPS0);
|
||||
|
||||
// enable a2d conversions
|
||||
sbi(ADCSRA, ADEN);
|
||||
|
||||
// the bootloader connects pins 0 and 1 to the USART; disconnect them
|
||||
// here so they can be used as normal digital i/o; they will be
|
||||
// reconnected in Serial.begin()
|
||||
UCSR0B = 0;
|
||||
#if defined(__AVR_ATmega644P__)
|
||||
//TODO: test to see if disabling this helps?
|
||||
//UCSR1B = 0;
|
||||
#endif
|
||||
}
|
Reference in New Issue
Block a user