SAMD51 Bricolemon / Bricolemon Lite boards (#23658)

This commit is contained in:
Kelroy 2022-02-05 01:40:35 +01:00 committed by Scott Lahteine
parent 50ffacfb90
commit 22db62d95a
4 changed files with 1298 additions and 0 deletions

View File

@ -443,6 +443,8 @@
// //
#define BOARD_AGCM4_RAMPS_144 6100 // RAMPS 1.4.4 #define BOARD_AGCM4_RAMPS_144 6100 // RAMPS 1.4.4
#define BOARD_BRICOLEMON_V1_0 6101 // Bricolemon
#define BOARD_BRICOLEMON_LITE_V1_0 6102 // Bricolemon Lite
// //
// Custom board // Custom board

View File

@ -730,6 +730,10 @@
#elif MB(AGCM4_RAMPS_144) #elif MB(AGCM4_RAMPS_144)
#include "samd/pins_RAMPS_144.h" // SAMD51 env:SAMD51_grandcentral_m4 #include "samd/pins_RAMPS_144.h" // SAMD51 env:SAMD51_grandcentral_m4
#elif MB(BRICOLEMON_V1_0)
#include "samd/pins_BRICOLEMON_V1_0.h" // SAMD51 env:SAMD51_grandcentral_m4
#elif MB(BRICOLEMON_LITE_V1_0)
#include "samd/pins_BRICOLEMON_LITE_V1_0.h" // SAMD51 env:SAMD51_grandcentral_m4
// //
// Custom board (with custom PIO env) // Custom board (with custom PIO env)

View File

@ -0,0 +1,616 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* BRICOLEMON LITE Board. Based on atsamd51 (AGCM4), bootloader and credits by ADAFRUIT.
* This board its a 3.3V LOGIC Board, following the ADAFRUIT example, all of the board is open source.
* Schematic: Refer to the Bricolemon
* 3DSTEP: https://github.com/bricogeek/bricolemon/blob/master/Documentacion/Bricolemon%20Lite/LC_BG_002_PCB_V1I4.step
* PinDemux: https://github.com/bricogeek/bricolemon/blob/master/Documentacion/Bricolemon/PinDEMUX.xlsx
*
* NOTE: We need the Serial port on the -1 to make it work!!. Remember to change it on configuration.h #define SERIAL_PORT -1
*/
#if NOT_TARGET(ARDUINO_GRAND_CENTRAL_M4)
#error "Oops! Select 'Adafruit Grand Central M4' in 'Tools > Board.'"
#endif
#ifndef BOARD_INFO_NAME
#define BOARD_INFO_NAME "BRICOLEMON LITE V1.0" // , Lemoncrest & BricoGeek collaboration.
#endif
/**
* EEPROM EMULATION: Works with some bugs already, but the board needs an I2C EEPROM memory soldered on.
*/
//#define FLASH_EEPROM_EMULATION
#define I2C_EEPROM // EEPROM on I2C-0
#define MARLIN_EEPROM_SIZE 0x70000 // 512K (CAT24C512)
// This is another option to emulate an EEPROM, but it's more efficient to not lose the data in the first place.
//#define SDCARD_EEPROM_EMULATION
//
// BLTOUCH PIN: This pin is the signal pin for the BLTOUCH sensor.
//
#define SERVO0_PIN 33 // BLTouch PWM
//
// Limit Switches
//
#define X_STOP_PIN 10
#define Y_STOP_PIN 11
#define Z_STOP_PIN 12
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 12
#endif
//
// Steppers
//
#define X_STEP_PIN 3
#define X_DIR_PIN 22
#define X_ENABLE_PIN 26
#define Y_STEP_PIN 4
#define Y_DIR_PIN 23
#define Y_ENABLE_PIN 27
#define Z_STEP_PIN 5
#define Z_DIR_PIN 24
#define Z_ENABLE_PIN 28
#define E0_STEP_PIN 2
#define E0_DIR_PIN 25
#define E0_ENABLE_PIN 29
// Filament runout. You may choose to use this pin for some other purpose. It's a normal GPIO that can be configured as I/O.
// For example, a switch to detect any kind of behavior, Power supply pin .... etc.
#define FIL_RUNOUT_PIN 32
//
// Temperature Sensors
//
#define TEMP_0_PIN 1
#define TEMP_BED_PIN 3
//
// Heaters / Fans
//
#define HEATER_0_PIN 6
#define HEATER_BED_PIN 7
#define FAN_PIN 8
#define FAN1_PIN 9
//
// LCD / Controller
//
/**
* Bricolemon Expansion connectors
*
* ------ ------
* VCC | 1 2 | GND KILL | 1 2 | GND
* LCD7 | 3 4 | LCDD6 RESET | 3 4 | SD_DETECT
* LCD5 | 5 6 LCDD4 MOSI | 5 6 BTN_EN1
* LCDRS | 7 8 | LCDDE SS | 7 8 | BTN_EN2
* BTN_ENCODER | 9 10 | BEEPER SCLK | 9 10 | MISO
* ------ ------
* EXP1 EXP2
*
*- This extra connector is for a serial display like the MKS TFT.
* MKS TFT
* ------
* RX0 | . . | NC
* TX0 | . . NC
* GND | . . GND
* 5B | . . | 5V
* ------
*
*- Special mapping of EXP1 to EXP3 to work with Ender displays.
*
* Enable CR10_STOCKDISPLAY in Configuration.h and connect EXP1 to the display EXP3 with this mapping.
* ------
* VCC | 1 2 | GND
* LCDDE | 3 4 | LCDRS
* LCDD4 | 5 6 BTN_EN2
* RESET | 7 8 | BTN_EN1
* BTN_ENCODER | 9 10 | BEEPER
* ------
*
*- Digital pinout reference of the Bricolemon for advanced users/configurations.
*
* ------ ------
* VCC | 1 2 | GND D49 | 1 2 | GND
* D39 | 3 4 | D38 RST | 3 4 | D44
* D37 | 5 6 D36 D51 | 5 6 D42
* D34 | 7 8 | D35 D53 | 7 8 | D43
* D40 | 9 10 | D41 D52 | 9 10 | D50
* ------ ------
* EXP1 EXP2
*
*- Pin table overview
* LCD--- SPI---
* LCD4 36 MISO 50
* LCD5 37 SS 53
* LCD6 38 SCKL 52
* LCD7 39 MOSI 51
* LCDRS 34 BEEPER
* LCDDE 35 BEEP 41
* ENCODER--- SD-CARD---
* BTN_EN1 42
* BTN_EN2 43 SD_DETECT 44
* BTN_ENCODER 40 KILL_PIN 49
*/
#define EXP1_03_PIN 39
#define EXP1_04_PIN 38
#define EXP1_05_PIN 37
#define EXP1_06_PIN 36
#define EXP1_07_PIN 34
#define EXP1_08_PIN 35
#define EXP1_09_PIN 40
#define EXP1_10_PIN 41
#define EXP2_01_PIN 49
#define EXP2_04_PIN 44
#define EXP2_05_PIN 51
#define EXP2_06_PIN 42
#define EXP2_07_PIN 53
#define EXP2_08_PIN 43
#define EXP2_09_PIN 52
#define EXP2_10_PIN 50
#if ENABLED(CR10_STOCKDISPLAY)
#define EXP3_03_PIN EXP1_03_PIN
#define EXP3_04_PIN EXP1_04_PIN
#define EXP3_05_PIN EXP1_05_PIN
#define EXP3_06_PIN EXP1_06_PIN
#define EXP3_07_PIN EXP1_07_PIN
#define EXP3_08_PIN EXP1_08_PIN
#define EXP3_09_PIN EXP1_09_PIN
#define EXP3_10_PIN EXP1_10_PIN
#endif
/************************************/
/***** Configurations Section ******/
/************************************/
/**
* This section starts with the pins_RAMPS_144.h as example, after if you need any new
* display, you could use normal duponts and connect it with with the scheme showed before.
* Tested:
* - Ender 3 Old display (Character LCD)
* - Ender 3 New Serial DWING Display
* - Reprap Display
* - Ender 5 New Serial Display
* - Any Reprap character display like
*/
#if HAS_WIRED_LCD
//
// LCD Display output pins
//
#if HAS_DWIN_E3V2 || IS_DWIN_MARLINUI
#if LCD_SERIAL_PORT != 1
#error "LCD_SERIAL_PORT should be 1 for this display."
#endif
// DWIN Encoder
#define BTN_ENC EXP1_09_PIN
#define BTN_EN1 EXP1_08_PIN
#define BTN_EN2 EXP1_07_PIN
#ifndef BEEPER_PIN
#define BEEPER_PIN EXP1_10_PIN
#undef SPEAKER
#endif
#elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
// TO TEST
//#define LCD_PINS_RS EXP2_01_PIN // CS chip select /SS chip slave select
//#define LCD_PINS_ENABLE EXP2_05_PIN // SID (MOSI)
//#define LCD_PINS_D4 EXP2_09_PIN // SCK (CLK) clock
#elif BOTH(IS_NEWPANEL, PANEL_ONE)
// TO TEST
//#define LCD_PINS_RS EXP1_09_PIN
//#define LCD_PINS_ENABLE EXP2_06_PIN
//#define LCD_PINS_D4 57 // Mega/Due:65 - AGCM4:57
//#define LCD_PINS_D5 58 // Mega/Due:66 - AGCM4:58
//#define LCD_PINS_D6 EXP2_04_PIN
//#define LCD_PINS_D7 56 // Mega/Due:64 - AGCM4:56
#else
#if ENABLED(CR10_STOCKDISPLAY)
// TO TEST
#define LCD_PINS_RS EXP3_04_PIN
#define LCD_PINS_ENABLE EXP3_03_PIN
#define LCD_PINS_D4 EXP3_05_PIN
#if !IS_NEWPANEL
// TO TEST
//#define BEEPER_PIN EXP3_05_PIN
#endif
#elif ENABLED(ZONESTAR_LCD)
// TO TEST
//#define LCD_PINS_RS 56 // Mega/Due:64 - AGCM4:56
//#define LCD_PINS_ENABLE EXP2_04_PIN
//#define LCD_PINS_D4 55 // Mega/Due:63 - AGCM4:55
//#define LCD_PINS_D5 EXP1_09_PIN
//#define LCD_PINS_D6 EXP2_06_PIN
//#define LCD_PINS_D7 57 // Mega/Due:65 - AGCM4:57
#else
#if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306)
// TO TEST
//#define LCD_PINS_DC 25 // Set as output on init
//#define LCD_PINS_RS 27 // Pull low for 1s to init
// DOGM SPI LCD Support
//#define DOGLCD_CS 16
//#define DOGLCD_MOSI 17
//#define DOGLCD_SCK 23
//#define DOGLCD_A0 LCD_PINS_DC
#else
// Definitions for any standard Display
#define LCD_PINS_RS EXP1_07_PIN
#define LCD_PINS_ENABLE EXP1_08_PIN
#define LCD_PINS_D4 EXP1_06_PIN
#define LCD_PINS_D5 EXP1_05_PIN
#define LCD_PINS_D6 EXP1_04_PIN
#endif
#define LCD_PINS_D7 EXP1_03_PIN
#if !IS_NEWPANEL
#define BEEPER_PIN EXP1_10_PIN
#endif
#endif
#if !IS_NEWPANEL
// Buttons attached to a shift register
// Not wired yet
//#define SHIFT_CLK_PIN EXP1_04_PIN
//#define SHIFT_LD_PIN EXP2_06_PIN
//#define SHIFT_OUT_PIN EXP1_09_PIN
//#define SHIFT_EN_PIN 17
#endif
#endif
//
// LCD Display input pins
//
#if IS_NEWPANEL
#if IS_RRD_SC
#define BEEPER_PIN EXP1_10_PIN
#if ENABLED(CR10_STOCKDISPLAY)
// TO TEST
#define BTN_EN1 EXP3_08_PIN
#define BTN_EN2 EXP3_06_PIN
#else
// Definitions for any standard Display
#define BTN_EN1 EXP2_06_PIN
#define BTN_EN2 EXP2_08_PIN
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
#endif
#endif
#define BTN_ENC EXP1_09_PIN
#ifndef SD_DETECT_PIN
#define SD_DETECT_PIN EXP2_04_PIN
#endif
#define KILL_PIN EXP2_01_PIN
#if ENABLED(BQ_LCD_SMART_CONTROLLER)
//#define LCD_BACKLIGHT_PIN EXP1_03_PIN // TO TEST
#endif
#elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
// TO TEST
//#define BTN_EN1 56 // Mega/Due:64 - AGCM4:56
//#define BTN_EN2 72 // Mega/Due:59 - AGCM4:72
//#define BTN_ENC 55
//#define SD_DETECT_PIN EXP2_06_PIN
#elif ENABLED(LCD_I2C_PANELOLU2)
// TO TEST
//#define BTN_EN1 47
//#define BTN_EN2 EXP2_08_PIN
//#define BTN_ENC 32
//#define LCD_SDSS SDSS
//#define KILL_PIN EXP1_10_PIN
#elif ENABLED(LCD_I2C_VIKI)
// TO TEST
//#define BTN_EN1 EXP1_09_PIN // https://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42.
//#define BTN_EN2 EXP2_06_PIN
//#define BTN_ENC -1
//#define LCD_SDSS SDSS
//#define SD_DETECT_PIN EXP2_01_PIN
#elif ANY(VIKI2, miniVIKI)
// TO TEST
//#define DOGLCD_CS 45
//#define DOGLCD_A0 EXP2_04_PIN
//#define LCD_SCREEN_ROT_180
//#define BEEPER_PIN 33
//#define STAT_LED_RED_PIN 32
//#define STAT_LED_BLUE_PIN EXP1_08_PIN
//#define BTN_EN1 22
//#define BTN_EN2 7
//#define BTN_ENC EXP1_03_PIN
//#define SD_DETECT_PIN -1 // Pin 49 for display SD interface, 72 for easy adapter board
//#define KILL_PIN 31
#elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
// TO TEST
//#define DOGLCD_CS 29
//#define DOGLCD_A0 27
//#define BEEPER_PIN 23
//#define LCD_BACKLIGHT_PIN 33
//#define BTN_EN1 EXP1_08_PIN
//#define BTN_EN2 EXP1_05_PIN
//#define BTN_ENC 31
//#define LCD_SDSS SDSS
//#define SD_DETECT_PIN EXP2_01_PIN
//#define KILL_PIN EXP1_10_PIN
#elif EITHER(MKS_MINI_12864, FYSETC_MINI_12864)
// TO TEST
//#define BEEPER_PIN EXP1_05_PIN
//#define BTN_ENC EXP1_08_PIN
//#define SD_DETECT_PIN EXP2_01_PIN
//#ifndef KILL_PIN
// #define KILL_PIN EXP1_10_PIN
//#endif
#if ENABLED(MKS_MINI_12864)
// TO TEST
//#define DOGLCD_A0 27
//#define DOGLCD_CS 25
// GLCD features
// Uncomment screen orientation
//#define LCD_SCREEN_ROT_90
//#define LCD_SCREEN_ROT_180
//#define LCD_SCREEN_ROT_270
// not connected to a pin
//#define LCD_BACKLIGHT_PIN 57 // backlight LED on A11/D? (Mega/Due:65 - AGCM4:57)
//#define BTN_EN1 31
//#define BTN_EN2 33
#elif ENABLED(FYSETC_MINI_12864)
// From https://wiki.fysetc.com/Mini12864_Panel/?fbclid=IwAR1FyjuNdVOOy9_xzky3qqo_WeM5h-4gpRnnWhQr_O1Ef3h0AFnFXmCehK8
// TO TEST
//#define DOGLCD_A0 16
//#define DOGLCD_CS 17
//#define BTN_EN1 33
//#define BTN_EN2 31
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
//#define LCD_RESET_PIN 23 // Must be high or open for LCD to operate normally.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN
// TO TEST
//#define RGB_LED_R_PIN 25
#endif
#ifndef RGB_LED_G_PIN
// TO TEST
//#define RGB_LED_G_PIN 27
#endif
#ifndef RGB_LED_B_PIN
// TO TEST
//#define RGB_LED_B_PIN 29
#endif
#elif ENABLED(FYSETC_MINI_12864_2_1)
// TO TEST
//#define NEOPIXEL_PIN 25
#endif
#endif
#elif ENABLED(MINIPANEL)
// TO TEST
//#define BEEPER_PIN EXP2_06_PIN
// not connected to a pin
//#define LCD_BACKLIGHT_PIN 57 // backlight LED on A11/D? (Mega/Due:65 - AGCM4:57)
//#define DOGLCD_A0 EXP2_04_PIN
//#define DOGLCD_CS 58 // Mega/Due:66 - AGCM4:58
// GLCD features
// Uncomment screen orientation
//#define LCD_SCREEN_ROT_90
//#define LCD_SCREEN_ROT_180
//#define LCD_SCREEN_ROT_270
//#define BTN_EN1 EXP1_09_PIN
//#define BTN_EN2 55 // Mega/Due:63 - AGCM4:55
//#define BTN_ENC 72 // Mega/Due:59 - AGCM4:72
//#define SD_DETECT_PIN EXP2_01_PIN
//#define KILL_PIN 56 // Mega/Due:64 - AGCM4:56
#elif ENABLED(ZONESTAR_LCD)
// TO TEST
//#define ADC_KEYPAD_PIN 12
#elif ENABLED(AZSMZ_12864)
// TO TEST
#else
// Beeper on AUX-4
//#define BEEPER_PIN 33
// Buttons are directly attached to AUX-2
#if IS_RRW_KEYPAD
// TO TEST
//#define SHIFT_OUT_PIN EXP1_09_PIN
//#define SHIFT_CLK_PIN EXP2_04_PIN
//#define SHIFT_LD_PIN EXP2_06_PIN
//#define BTN_EN1 56 // Mega/Due:64 - AGCM4:56
//#define BTN_EN2 72 // Mega/Due:59 - AGCM4:72
//#define BTN_ENC 55 // Mega/Due:63 - AGCM4:55
#elif ENABLED(PANEL_ONE)
// TO TEST
//#define BTN_EN1 72 // AUX2 PIN 3 (Mega/Due:59 - AGCM4:72)
//#define BTN_EN2 55 // AUX2 PIN 4 (Mega/Due:63 - AGCM4:55)
//#define BTN_ENC EXP2_01_PIN // AUX3 PIN 7
#else
// TO TEST
//#define BTN_EN1 EXP1_05_PIN
//#define BTN_EN2 EXP1_08_PIN
//#define BTN_ENC 31
#endif
#if ENABLED(G3D_PANEL)
// TO TEST
//#define SD_DETECT_PIN EXP2_01_PIN
//#define KILL_PIN EXP1_10_PIN
#endif
#endif
#endif // IS_NEWPANEL
#endif // HAS_WIRED_LCD
//
// SD Support
//
/**
* Bricolemon has an SD slot, but to change it to your LCD or Custom, set the option to one of the following:
*
* LCD - Use the SD drive in the external LCD controller.
* ONBOARD - Use the SD drive on the control board.
* CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
*
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
#ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION ONBOARD
#endif
#if SD_CONNECTION_IS(ONBOARD)
#define SDSS 83
#undef SD_DETECT_PIN
#define SD_DETECT_PIN 95
#else
#define SDSS EXP2_07_PIN
#endif
#if HAS_TMC_UART
/**
* Address for the UART Configuration of the TMC2209. Override in Configuration files.
* To test TMC2209 Steppers enable TMC_DEBUG in Configuration_adv.h and test the M122 command with voltage on the steppers.
*/
#ifndef X_SLAVE_ADDRESS
#define X_SLAVE_ADDRESS 0b00
#endif
#ifndef Y_SLAVE_ADDRESS
#define Y_SLAVE_ADDRESS 0b01
#endif
#ifndef Z_SLAVE_ADDRESS
#define Z_SLAVE_ADDRESS 0b10
#endif
#ifndef E0_SLAVE_ADDRESS
#define E0_SLAVE_ADDRESS 0b11
#endif
/**
* TMC2208/TMC2209 stepper drivers
* It seems to work perfectly fine on Software Serial, if an advanced user wants to test, you could use the SAMD51 Serial1 and Serial 2. Be careful with the Sercom configurations.
*/
//#define X_HARDWARE_SERIAL Serial1
//#define Y_HARDWARE_SERIAL Serial1
//#define Z_HARDWARE_SERIAL Serial1
//#define E0_HARDWARE_SERIAL Serial1
// This is the stable default value after testing, but, higher UART rates could be configured, remeber to test the Steppers with the M122 command to check if everything works.
#define TMC_BAUD_RATE 250000
//
// Software serial
//
#define X_SERIAL_TX_PIN 0
#define X_SERIAL_RX_PIN 1
#define Y_SERIAL_TX_PIN X_SERIAL_TX_PIN
#define Y_SERIAL_RX_PIN X_SERIAL_RX_PIN
#define Z_SERIAL_TX_PIN X_SERIAL_TX_PIN
#define Z_SERIAL_RX_PIN X_SERIAL_RX_PIN
#define E0_SERIAL_TX_PIN X_SERIAL_TX_PIN
#define E0_SERIAL_RX_PIN X_SERIAL_RX_PIN
#endif

View File

@ -0,0 +1,676 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* BRICOLEMON Board. Based on ATSAMD51 (AGCM4), bootloader and credits by ADAFRUIT.
*/
#if NOT_TARGET(ARDUINO_GRAND_CENTRAL_M4)
#error "Oops! Select 'Adafruit Grand Central M4' in 'Tools > Board.'"
#endif
#ifndef BOARD_INFO_NAME
#define BOARD_INFO_NAME "BRICOLEMON V1.0" // , Lemoncrest & BricoGeek collaboration.
#endif
/**
* BRICOLEMON Board. Based on atsamd51 (AGCM4), bootloader and credits by ADAFRUIT.
* This board its a 3.3V LOGIC Board, following the ADAFRUIT example, all of the board is open source.
* Schematic: https://github.com/bricogeek/bricolemon/blob/master/Documentacion/Bricolemon/EsquemaBricolemon_REVB.pdf
* 3DSTEP: https://github.com/bricogeek/bricolemon/blob/master/Documentacion/Bricolemon/BricolemonREVB.step
* PinDemux: https://github.com/bricogeek/bricolemon/blob/master/Documentacion/Bricolemon/PinDEMUX.xlsx
*
* NOTE: We need the Serial port on the -1 to make it work!!. Remember to change it on configuration.h #define SERIAL_PORT -1
*/
/**
* EEPROM EMULATION: Works with some bugs already, but the board needs an I2C EEPROM memory soldered on.
*/
//#define FLASH_EEPROM_EMULATION
#define I2C_EEPROM // EEPROM on I2C-0
#define MARLIN_EEPROM_SIZE 0x70000 // 512K (CAT24C512)
//This its another option to emulate an EEPROM, but its more efficient to dont loose the data the first One.
//#define SDCARD_EEPROM_EMULATION
//
// BLTouch
//
#define SERVO0_PIN 33 // BLTouch PWM
//
// Limit Switches
//
#define X_STOP_PIN 10
#define Y_STOP_PIN 11
#define Z_STOP_PIN 12
/**
* NOTE: Useful if extra TMC2209 are to be used as independent axes.
* We need to configure the new digital PIN, for this we could configure on the board the extra pin of this stepper, for example as a MIN_PIN/MAX_PIN. This pin is the D14.
*/
//#define Z2_STOP_PIN 14
//#define X2_STOP_PIN 14
//#define Y2_STOP_PIN 14
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 12
#endif
//
// Steppers
//
#define X_STEP_PIN 3
#define X_DIR_PIN 22
#define X_ENABLE_PIN 26
#define Y_STEP_PIN 4
#define Y_DIR_PIN 23
#define Y_ENABLE_PIN 27
#define Z_STEP_PIN 5
#define Z_DIR_PIN 24
#define Z_ENABLE_PIN 28
#define E0_STEP_PIN 2
#define E0_DIR_PIN 25
#define E0_ENABLE_PIN 29
#define E1_STEP_PIN 13
#define E1_DIR_PIN 46
#define E1_ENABLE_PIN 47
// Filament runout. You may choose to use this pin for some other purpose. It's a normal GPIO that can be configured as I/O.
// For example, a switch to detect any kind of behavior, Power supply pin .... etc.
#define FIL_RUNOUT_PIN 32
// This board have the option to use an extra TMC2209 stepper, one of the use could be as a second extruder.
#if EXTRUDERS < 2
// TODO: Corregir aquí que cuando tenemos dos extrusores o lo que sea, utiliza los endstop que le sobran, osea los max, no hay Z2_endstop
#if NUM_Z_STEPPER_DRIVERS > 1
#define Z2_STOP_PIN 14
#endif
#else
// If we want to configure the extra stepper as a Extruder, we should have undef all of the extra motors.
#undef X2_DRIVER_TYPE
#undef Y2_DRIVER_TYPE
#undef Z2_DRIVER_TYPE
#undef Z3_DRIVER_TYPE
#undef Z4_DRIVER_TYPE
// Si tenemos más de un extrusor lo que hacemos es definir el nuevo extrusor así como sus pines
// Acordarse de definir el #define TEMP_SENSOR_1, ya que este contiene el tipo de sonda del extrusor E1
#define FIL_RUNOUT2_PIN 14
#endif
//
// Extruder / Bed
//
// Temperature Sensors
#define TEMP_0_PIN 1
// You could use one of the ADC for a temp chamber if you don't use the second extruder, for example.
#if TEMP_SENSOR_CHAMBER > 0
#define TEMP_CHAMBER_PIN 3
#else
#define TEMP_1_PIN 3
#endif
#define TEMP_BED_PIN 2
//
// Heaters / Fans
//
#define HEATER_0_PIN 6
#define HEATER_1_PIN 45
#define HEATER_BED_PIN 7
// The board has 4 PWM fans, use and configure as desired
#define FAN_PIN 8
#define FAN1_PIN 9
#define FAN2_PIN 30
#define FAN3_PIN 31
//
// LCD / Controller
//
/**
* Bricolemon Expansion connectors
*
* ------ ------
* VCC | 1 2 | GND KILL | 1 2 | GND
* LCD7 | 3 4 | LCDD6 RESET | 3 4 | SD_DETECT
* LCD5 | 5 6 LCDD4 MOSI | 5 6 BTN_EN1
* LCDRS | 7 8 | LCDDE SS | 7 8 | BTN_EN2
* BTN_ENCODER | 9 10 | BEEPER SCLK | 9 10 | MISO
* ------ ------
* EXP1 EXP2
*
*- This extra connector is for a serial display like the MKS TFT.
* MKS TFT
* ------
* RX0 | . . | NC
* TX0 | . . NC
* GND | . . GND
* 5B | . . | 5V
* ------
*
*- Special mapping of EXP1 to EXP3 to work with Ender displays.
*
* Enable CR10_STOCKDISPLAY in Configuration.h and connect EXP1 to the display EXP3 with this mapping.
* ------
* VCC | 1 2 | GND
* LCDDE | 3 4 | LCDRS
* LCDD4 | 5 6 BTN_EN2
* RESET | 7 8 | BTN_EN1
* BTN_ENCODER | 9 10 | BEEPER
* ------
*
*- Digital pinout reference of the Bricolemon for advanced users/configurations.
*
* ------ ------
* VCC | 1 2 | GND D49 | 1 2 | GND
* D39 | 3 4 | D38 RST | 3 4 | D44
* D37 | 5 6 D36 D51 | 5 6 D42
* D34 | 7 8 | D35 D53 | 7 8 | D43
* D40 | 9 10 | D41 D52 | 9 10 | D50
* ------ ------
* EXP1 EXP2
*
*- Pin table overview
* LCD--- SPI---
* LCD4 36 MISO 50
* LCD5 37 SS 53
* LCD6 38 SCKL 52
* LCD7 39 MOSI 51
* LCDRS 34 BEEPER
* LCDDE 35 BEEP 41
* ENCODER--- SD-CARD---
* BTN_EN1 42 SD_DETECT 44
* BTN_EN2 43 KILL_PIN 49
* BTN_ENCODER 40
*/
#define EXP1_03_PIN 39
#define EXP1_04_PIN 38
#define EXP1_05_PIN 37
#define EXP1_06_PIN 36
#define EXP1_07_PIN 34
#define EXP1_08_PIN 35
#define EXP1_09_PIN 40
#define EXP1_10_PIN 41
#define EXP2_01_PIN 49
#define EXP2_04_PIN 44
#define EXP2_05_PIN 51
#define EXP2_06_PIN 42
#define EXP2_07_PIN 53
#define EXP2_08_PIN 43
#define EXP2_09_PIN 52
#define EXP2_10_PIN 50
#if ENABLED(CR10_STOCKDISPLAY)
#define EXP3_03_PIN EXP1_03_PIN
#define EXP3_04_PIN EXP1_04_PIN
#define EXP3_05_PIN EXP1_05_PIN
#define EXP3_06_PIN EXP1_06_PIN
#define EXP3_07_PIN EXP1_07_PIN
#define EXP3_08_PIN EXP1_08_PIN
#define EXP3_09_PIN EXP1_09_PIN
#define EXP3_10_PIN EXP1_10_PIN
#endif
/************************************/
/***** Configurations Section ******/
/************************************/
/**
* This sections starts with the pins_RAMPS_144.h as example, after if you need any new
* display, you could use normal duponts and connect it with with the scheme showed before.
* Tested:
* - Ender 3 Old display (Character LCD)
* - Ender 3 New Serial DWING Display
* - Reprap Display
* - Ender 5 New Serial Display
* - Any Reprap character display like
*/
#if HAS_WIRED_LCD
//
// LCD Display output pins
//
#if HAS_DWIN_E3V2 || IS_DWIN_MARLINUI
#if LCD_SERIAL_PORT != 1
#error "LCD_SERIAL_PORT should be 1 for this display."
#endif
// DWIN Encoder
#define BTN_ENC EXP1_09_PIN
#define BTN_EN1 EXP1_08_PIN
#define BTN_EN2 EXP1_07_PIN
#ifndef BEEPER_PIN
#define BEEPER_PIN EXP1_10_PIN
#undef SPEAKER
#endif
#elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
// TO TEST
//#define LCD_PINS_RS EXP2_01_PIN // CS chip select /SS chip slave select
//#define LCD_PINS_ENABLE EXP2_05_PIN // SID (MOSI)
//#define LCD_PINS_D4 EXP2_09_PIN // SCK (CLK) clock
#elif BOTH(IS_NEWPANEL, PANEL_ONE)
// TO TEST
//#define LCD_PINS_RS EXP1_09_PIN
//#define LCD_PINS_ENABLE EXP2_06_PIN
//#define LCD_PINS_D4 57 // Mega/Due:65 - AGCM4:57
//#define LCD_PINS_D5 58 // Mega/Due:66 - AGCM4:58
//#define LCD_PINS_D6 EXP2_04_PIN
//#define LCD_PINS_D7 56 // Mega/Due:64 - AGCM4:56
#else
#if ENABLED(CR10_STOCKDISPLAY)
// TO TEST
#define LCD_PINS_RS EXP3_04_PIN
#define LCD_PINS_ENABLE EXP3_03_PIN
#define LCD_PINS_D4 EXP3_05_PIN
#if !IS_NEWPANEL
// TO TEST
//#define BEEPER_PIN EXP3_05_PIN
#endif
#elif ENABLED(ZONESTAR_LCD)
// TO TEST
//#define LCD_PINS_RS 56 // Mega/Due:64 - AGCM4:56
//#define LCD_PINS_ENABLE EXP2_04_PIN
//#define LCD_PINS_D4 55 // Mega/Due:63 - AGCM4:55
//#define LCD_PINS_D5 EXP1_09_PIN
//#define LCD_PINS_D6 EXP2_06_PIN
//#define LCD_PINS_D7 57 // Mega/Due:65 - AGCM4:57
#else
#if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306)
// TO TEST
//#define LCD_PINS_DC 25 // Set as output on init
//#define LCD_PINS_RS 27 // Pull low for 1s to init
// DOGM SPI LCD Support
//#define DOGLCD_CS 16
//#define DOGLCD_MOSI 17
//#define DOGLCD_SCK 23
//#define DOGLCD_A0 LCD_PINS_DC
#else
// Definitions for any standard Display
#define LCD_PINS_RS EXP1_07_PIN
#define LCD_PINS_ENABLE EXP1_08_PIN
#define LCD_PINS_D4 EXP1_06_PIN
#define LCD_PINS_D5 EXP1_05_PIN
#define LCD_PINS_D6 EXP1_04_PIN
#endif
#define LCD_PINS_D7 EXP1_03_PIN
#if !IS_NEWPANEL
#define BEEPER_PIN EXP1_10_PIN
#endif
#endif
#if !IS_NEWPANEL
// Buttons attached to a shift register
// Not wired yet
//#define SHIFT_CLK_PIN EXP1_04_PIN
//#define SHIFT_LD_PIN EXP2_06_PIN
//#define SHIFT_OUT_PIN EXP1_09_PIN
//#define SHIFT_EN_PIN 17
#endif
#endif
//
// LCD Display input pins
//
#if IS_NEWPANEL
#if IS_RRD_SC
#define BEEPER_PIN EXP1_10_PIN
#if ENABLED(CR10_STOCKDISPLAY)
// TO TEST
#define BTN_EN1 EXP1_08_PIN
#define BTN_EN2 EXP1_06_PIN
#else
// Definitions fpr any standard Display
#define BTN_EN1 EXP2_06_PIN
#define BTN_EN2 EXP2_08_PIN
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
#endif
#endif
#define BTN_ENC EXP1_09_PIN
#ifndef SD_DETECT_PIN
#define SD_DETECT_PIN EXP2_04_PIN
#endif
#define KILL_PIN EXP2_01_PIN
#if ENABLED(BQ_LCD_SMART_CONTROLLER)
//#define LCD_BACKLIGHT_PIN EXP1_03_PIN // TO TEST
#endif
#elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
// TO TEST
//#define BTN_EN1 56 // Mega/Due:64 - AGCM4:56
//#define BTN_EN2 72 // Mega/Due:59 - AGCM4:72
//#define BTN_ENC 55
//#define SD_DETECT_PIN EXP2_06_PIN
#elif ENABLED(LCD_I2C_PANELOLU2)
// TO TEST
//#define BTN_EN1 47
//#define BTN_EN2 EXP2_08_PIN
//#define BTN_ENC 32
//#define LCD_SDSS SDSS
//#define KILL_PIN EXP1_10_PIN
#elif ENABLED(LCD_I2C_VIKI)
// TO TEST
//#define BTN_EN1 EXP1_09_PIN // https://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42.
//#define BTN_EN2 EXP2_06_PIN
//#define BTN_ENC -1
//#define LCD_SDSS SDSS
//#define SD_DETECT_PIN EXP2_01_PIN
#elif ANY(VIKI2, miniVIKI)
// TO TEST
//#define DOGLCD_CS 45
//#define DOGLCD_A0 EXP2_04_PIN
//#define LCD_SCREEN_ROT_180
//#define BEEPER_PIN 33
//#define STAT_LED_RED_PIN 32
//#define STAT_LED_BLUE_PIN EXP1_08_PIN
//#define BTN_EN1 22
//#define BTN_EN2 7
//#define BTN_ENC EXP1_03_PIN
//#define SD_DETECT_PIN -1 // Pin 49 for display SD interface, 72 for easy adapter board
//#define KILL_PIN 31
#elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
// TO TEST
//#define DOGLCD_CS 29
//#define DOGLCD_A0 27
//#define BEEPER_PIN 23
//#define LCD_BACKLIGHT_PIN 33
//#define BTN_EN1 EXP1_08_PIN
//#define BTN_EN2 EXP1_05_PIN
//#define BTN_ENC 31
//#define LCD_SDSS SDSS
//#define SD_DETECT_PIN EXP2_01_PIN
//#define KILL_PIN EXP1_10_PIN
#elif EITHER(MKS_MINI_12864, FYSETC_MINI_12864)
// TO TEST
//#define BEEPER_PIN EXP1_05_PIN
//#define BTN_ENC EXP1_08_PIN
//#define SD_DETECT_PIN EXP2_01_PIN
//#ifndef KILL_PIN
// #define KILL_PIN EXP1_10_PIN
//#endif
#if ENABLED(MKS_MINI_12864)
// TO TEST
//#define DOGLCD_A0 27
//#define DOGLCD_CS 25
// GLCD features
// Uncomment screen orientation
//#define LCD_SCREEN_ROT_90
//#define LCD_SCREEN_ROT_180
//#define LCD_SCREEN_ROT_270
// not connected to a pin
//#define LCD_BACKLIGHT_PIN 57 // backlight LED on A11/D? (Mega/Due:65 - AGCM4:57)
//#define BTN_EN1 31
//#define BTN_EN2 33
#elif ENABLED(FYSETC_MINI_12864)
// From https://wiki.fysetc.com/Mini12864_Panel/?fbclid=IwAR1FyjuNdVOOy9_xzky3qqo_WeM5h-4gpRnnWhQr_O1Ef3h0AFnFXmCehK8
// TO TEST
//#define DOGLCD_A0 16
//#define DOGLCD_CS 17
//#define BTN_EN1 33
//#define BTN_EN2 31
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
//#define LCD_RESET_PIN 23 // Must be high or open for LCD to operate normally.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN
// TO TEST
//#define RGB_LED_R_PIN 25
#endif
#ifndef RGB_LED_G_PIN
// TO TEST
//#define RGB_LED_G_PIN 27
#endif
#ifndef RGB_LED_B_PIN
// TO TEST
//#define RGB_LED_B_PIN 29
#endif
#elif ENABLED(FYSETC_MINI_12864_2_1)
// TO TEST
//#define NEOPIXEL_PIN 25
#endif
#endif
#elif ENABLED(MINIPANEL)
// TO TEST
//#define BEEPER_PIN EXP2_06_PIN
// not connected to a pin
//#define LCD_BACKLIGHT_PIN 57 // backlight LED on A11/D? (Mega/Due:65 - AGCM4:57)
//#define DOGLCD_A0 EXP2_04_PIN
//#define DOGLCD_CS 58 // Mega/Due:66 - AGCM4:58
// GLCD features
// Uncomment screen orientation
//#define LCD_SCREEN_ROT_90
//#define LCD_SCREEN_ROT_180
//#define LCD_SCREEN_ROT_270
//#define BTN_EN1 EXP1_09_PIN
//#define BTN_EN2 55 // Mega/Due:63 - AGCM4:55
//#define BTN_ENC 72 // Mega/Due:59 - AGCM4:72
//#define SD_DETECT_PIN EXP2_01_PIN
//#define KILL_PIN 56 // Mega/Due:64 - AGCM4:56
#elif ENABLED(ZONESTAR_LCD)
// TO TEST
//#define ADC_KEYPAD_PIN 12
#elif ENABLED(AZSMZ_12864)
// TO TEST
#else
// Beeper on AUX-4
//#define BEEPER_PIN 33
// Buttons are directly attached to AUX-2
#if IS_RRW_KEYPAD
// TO TEST
//#define SHIFT_OUT_PIN EXP1_09_PIN
//#define SHIFT_CLK_PIN EXP2_04_PIN
//#define SHIFT_LD_PIN EXP2_06_PIN
//#define BTN_EN1 56 // Mega/Due:64 - AGCM4:56
//#define BTN_EN2 72 // Mega/Due:59 - AGCM4:72
//#define BTN_ENC 55 // Mega/Due:63 - AGCM4:55
#elif ENABLED(PANEL_ONE)
// TO TEST
//#define BTN_EN1 72 // AUX2 PIN 3 (Mega/Due:59 - AGCM4:72)
//#define BTN_EN2 55 // AUX2 PIN 4 (Mega/Due:63 - AGCM4:55)
//#define BTN_ENC EXP2_01_PIN // AUX3 PIN 7
#else
// TO TEST
//#define BTN_EN1 EXP1_05_PIN
//#define BTN_EN2 EXP1_08_PIN
//#define BTN_ENC 31
#endif
#if ENABLED(G3D_PANEL)
// TO TEST
//#define SD_DETECT_PIN EXP2_01_PIN
//#define KILL_PIN EXP1_10_PIN
#endif
#endif
#endif // IS_NEWPANEL
#endif // HAS_WIRED_LCD
//
// SD Support
//
/**
* Bricolemon has an SD slot, but to change it to your LCD or Custom, set the option to one of the following:
*
* LCD - Use the SD drive in the external LCD controller.
* ONBOARD - Use the SD drive on the control board.
* CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
*
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
#ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION ONBOARD
#endif
#if SD_CONNECTION_IS(ONBOARD)
#define SDSS 83
#undef SD_DETECT_PIN
#define SD_DETECT_PIN 95
#else
#define SDSS EXP2_07_PIN
#endif
#if HAS_TMC_UART
/**
* Address for the UART Configuration of the TMC2209. Override in Configuration files.
* To test TMC2209 Steppers enable TMC_DEBUG in Configuration_adv.h and test the M122 command with voltage on the steppers.
*/
#ifndef X_SLAVE_ADDRESS
#define X_SLAVE_ADDRESS 0b00
#endif
#ifndef Y_SLAVE_ADDRESS
#define Y_SLAVE_ADDRESS 0b01
#endif
#ifndef Z_SLAVE_ADDRESS
#define Z_SLAVE_ADDRESS 0b10
#endif
#ifndef E0_SLAVE_ADDRESS
#define E0_SLAVE_ADDRESS 0b11
#endif
#ifndef E1_SLAVE_ADDRESS
#define E1_SLAVE_ADDRESS 0b00
#endif
/**
* TMC2208/TMC2209 stepper drivers
* It seems to work perfectly fine on Software Serial, if an advanced user wants to test, you could use the SAMD51 Serial1 and Serial 2. Be careful with the Sercom configurations.
* Steppers 1,2,3,4 (X,Y,Z,E0) are on the Serial1, Sercom (RX = 0, TX = 1), extra stepper 5 (E1 or any axis you want) is on Serial2, Sercom (RX = 17, TX = 16)
*/
//#define X_HARDWARE_SERIAL Serial1
//#define Y_HARDWARE_SERIAL Serial1
//#define Z_HARDWARE_SERIAL Serial1
//#define E0_HARDWARE_SERIAL Serial1
//#define E1_HARDWARE_SERIAL Serial2
#define TMC_BAUD_RATE 250000
//
// Software serial
//
#define X_SERIAL_TX_PIN 0
#define X_SERIAL_RX_PIN 1
#define Y_SERIAL_TX_PIN X_SERIAL_TX_PIN
#define Y_SERIAL_RX_PIN X_SERIAL_RX_PIN
#define Z_SERIAL_TX_PIN X_SERIAL_TX_PIN
#define Z_SERIAL_RX_PIN X_SERIAL_RX_PIN
#define E0_SERIAL_TX_PIN X_SERIAL_TX_PIN
#define E0_SERIAL_RX_PIN X_SERIAL_RX_PIN
#define E1_SERIAL_TX_PIN 17
#define E1_SERIAL_RX_PIN 16
#endif