✨ SAMD51 Bricolemon / Bricolemon Lite boards (#23658)
This commit is contained in:
Kelroy
Scott Lahteine
parent
50ffacfb90
commit
22db62d95a
@ -443,6 +443,8 @@
|
|||||||
//
|
//
|
||||||
|
|
||||||
#define BOARD_AGCM4_RAMPS_144 6100 // RAMPS 1.4.4
|
#define BOARD_AGCM4_RAMPS_144 6100 // RAMPS 1.4.4
|
||||||
|
#define BOARD_BRICOLEMON_V1_0 6101 // Bricolemon
|
||||||
|
#define BOARD_BRICOLEMON_LITE_V1_0 6102 // Bricolemon Lite
|
||||||
|
|
||||||
//
|
//
|
||||||
// Custom board
|
// Custom board
|
||||||
|
|||||||
@ -730,6 +730,10 @@
|
|||||||
|
|
||||||
#elif MB(AGCM4_RAMPS_144)
|
#elif MB(AGCM4_RAMPS_144)
|
||||||
#include "samd/pins_RAMPS_144.h" // SAMD51 env:SAMD51_grandcentral_m4
|
#include "samd/pins_RAMPS_144.h" // SAMD51 env:SAMD51_grandcentral_m4
|
||||||
|
#elif MB(BRICOLEMON_V1_0)
|
||||||
|
#include "samd/pins_BRICOLEMON_V1_0.h" // SAMD51 env:SAMD51_grandcentral_m4
|
||||||
|
#elif MB(BRICOLEMON_LITE_V1_0)
|
||||||
|
#include "samd/pins_BRICOLEMON_LITE_V1_0.h" // SAMD51 env:SAMD51_grandcentral_m4
|
||||||
|
|
||||||
//
|
//
|
||||||
// Custom board (with custom PIO env)
|
// Custom board (with custom PIO env)
|
||||||
|
|||||||
616
Marlin/src/pins/samd/pins_BRICOLEMON_LITE_V1_0.h
Normal file
616
Marlin/src/pins/samd/pins_BRICOLEMON_LITE_V1_0.h
Normal file
@ -0,0 +1,616 @@
|
|||||||
|
/**
|
||||||
|
* Marlin 3D Printer Firmware
|
||||||
|
* Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
|
*
|
||||||
|
* Based on Sprinter and grbl.
|
||||||
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 3 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
/**
|
||||||
|
* BRICOLEMON LITE Board. Based on atsamd51 (AGCM4), bootloader and credits by ADAFRUIT.
|
||||||
|
* This board its a 3.3V LOGIC Board, following the ADAFRUIT example, all of the board is open source.
|
||||||
|
* Schematic: Refer to the Bricolemon
|
||||||
|
* 3DSTEP: https://github.com/bricogeek/bricolemon/blob/master/Documentacion/Bricolemon%20Lite/LC_BG_002_PCB_V1I4.step
|
||||||
|
* PinDemux: https://github.com/bricogeek/bricolemon/blob/master/Documentacion/Bricolemon/PinDEMUX.xlsx
|
||||||
|
*
|
||||||
|
* NOTE: We need the Serial port on the -1 to make it work!!. Remember to change it on configuration.h #define SERIAL_PORT -1
|
||||||
|
*/
|
||||||
|
|
||||||
|
#if NOT_TARGET(ARDUINO_GRAND_CENTRAL_M4)
|
||||||
|
#error "Oops! Select 'Adafruit Grand Central M4' in 'Tools > Board.'"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef BOARD_INFO_NAME
|
||||||
|
#define BOARD_INFO_NAME "BRICOLEMON LITE V1.0" // , Lemoncrest & BricoGeek collaboration.
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/**
|
||||||
|
* EEPROM EMULATION: Works with some bugs already, but the board needs an I2C EEPROM memory soldered on.
|
||||||
|
*/
|
||||||
|
//#define FLASH_EEPROM_EMULATION
|
||||||
|
#define I2C_EEPROM // EEPROM on I2C-0
|
||||||
|
#define MARLIN_EEPROM_SIZE 0x70000 // 512K (CAT24C512)
|
||||||
|
|
||||||
|
// This is another option to emulate an EEPROM, but it's more efficient to not lose the data in the first place.
|
||||||
|
//#define SDCARD_EEPROM_EMULATION
|
||||||
|
|
||||||
|
//
|
||||||
|
// BLTOUCH PIN: This pin is the signal pin for the BLTOUCH sensor.
|
||||||
|
//
|
||||||
|
#define SERVO0_PIN 33 // BLTouch PWM
|
||||||
|
|
||||||
|
//
|
||||||
|
// Limit Switches
|
||||||
|
//
|
||||||
|
#define X_STOP_PIN 10
|
||||||
|
#define Y_STOP_PIN 11
|
||||||
|
#define Z_STOP_PIN 12
|
||||||
|
|
||||||
|
//
|
||||||
|
// Z Probe (when not Z_MIN_PIN)
|
||||||
|
//
|
||||||
|
#ifndef Z_MIN_PROBE_PIN
|
||||||
|
#define Z_MIN_PROBE_PIN 12
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//
|
||||||
|
// Steppers
|
||||||
|
//
|
||||||
|
#define X_STEP_PIN 3
|
||||||
|
#define X_DIR_PIN 22
|
||||||
|
#define X_ENABLE_PIN 26
|
||||||
|
|
||||||
|
#define Y_STEP_PIN 4
|
||||||
|
#define Y_DIR_PIN 23
|
||||||
|
#define Y_ENABLE_PIN 27
|
||||||
|
|
||||||
|
#define Z_STEP_PIN 5
|
||||||
|
#define Z_DIR_PIN 24
|
||||||
|
#define Z_ENABLE_PIN 28
|
||||||
|
|
||||||
|
#define E0_STEP_PIN 2
|
||||||
|
#define E0_DIR_PIN 25
|
||||||
|
#define E0_ENABLE_PIN 29
|
||||||
|
|
||||||
|
// Filament runout. You may choose to use this pin for some other purpose. It's a normal GPIO that can be configured as I/O.
|
||||||
|
// For example, a switch to detect any kind of behavior, Power supply pin .... etc.
|
||||||
|
#define FIL_RUNOUT_PIN 32
|
||||||
|
|
||||||
|
//
|
||||||
|
// Temperature Sensors
|
||||||
|
//
|
||||||
|
#define TEMP_0_PIN 1
|
||||||
|
#define TEMP_BED_PIN 3
|
||||||
|
|
||||||
|
//
|
||||||
|
// Heaters / Fans
|
||||||
|
//
|
||||||
|
#define HEATER_0_PIN 6
|
||||||
|
#define HEATER_BED_PIN 7
|
||||||
|
#define FAN_PIN 8
|
||||||
|
#define FAN1_PIN 9
|
||||||
|
|
||||||
|
//
|
||||||
|
// LCD / Controller
|
||||||
|
//
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Bricolemon Expansion connectors
|
||||||
|
*
|
||||||
|
* ------ ------
|
||||||
|
* VCC | 1 2 | GND KILL | 1 2 | GND
|
||||||
|
* LCD7 | 3 4 | LCDD6 RESET | 3 4 | SD_DETECT
|
||||||
|
* LCD5 | 5 6 LCDD4 MOSI | 5 6 BTN_EN1
|
||||||
|
* LCDRS | 7 8 | LCDDE SS | 7 8 | BTN_EN2
|
||||||
|
* BTN_ENCODER | 9 10 | BEEPER SCLK | 9 10 | MISO
|
||||||
|
* ------ ------
|
||||||
|
* EXP1 EXP2
|
||||||
|
*
|
||||||
|
*- This extra connector is for a serial display like the MKS TFT.
|
||||||
|
* MKS TFT
|
||||||
|
* ------
|
||||||
|
* RX0 | . . | NC
|
||||||
|
* TX0 | . . NC
|
||||||
|
* GND | . . GND
|
||||||
|
* 5B | . . | 5V
|
||||||
|
* ------
|
||||||
|
*
|
||||||
|
*- Special mapping of EXP1 to EXP3 to work with Ender displays.
|
||||||
|
*
|
||||||
|
* Enable CR10_STOCKDISPLAY in Configuration.h and connect EXP1 to the display EXP3 with this mapping.
|
||||||
|
* ------
|
||||||
|
* VCC | 1 2 | GND
|
||||||
|
* LCDDE | 3 4 | LCDRS
|
||||||
|
* LCDD4 | 5 6 BTN_EN2
|
||||||
|
* RESET | 7 8 | BTN_EN1
|
||||||
|
* BTN_ENCODER | 9 10 | BEEPER
|
||||||
|
* ------
|
||||||
|
*
|
||||||
|
*- Digital pinout reference of the Bricolemon for advanced users/configurations.
|
||||||
|
*
|
||||||
|
* ------ ------
|
||||||
|
* VCC | 1 2 | GND D49 | 1 2 | GND
|
||||||
|
* D39 | 3 4 | D38 RST | 3 4 | D44
|
||||||
|
* D37 | 5 6 D36 D51 | 5 6 D42
|
||||||
|
* D34 | 7 8 | D35 D53 | 7 8 | D43
|
||||||
|
* D40 | 9 10 | D41 D52 | 9 10 | D50
|
||||||
|
* ------ ------
|
||||||
|
* EXP1 EXP2
|
||||||
|
*
|
||||||
|
*- Pin table overview
|
||||||
|
* LCD--- SPI---
|
||||||
|
* LCD4 36 MISO 50
|
||||||
|
* LCD5 37 SS 53
|
||||||
|
* LCD6 38 SCKL 52
|
||||||
|
* LCD7 39 MOSI 51
|
||||||
|
* LCDRS 34 BEEPER
|
||||||
|
* LCDDE 35 BEEP 41
|
||||||
|
* ENCODER--- SD-CARD---
|
||||||
|
* BTN_EN1 42
|
||||||
|
* BTN_EN2 43 SD_DETECT 44
|
||||||
|
* BTN_ENCODER 40 KILL_PIN 49
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define EXP1_03_PIN 39
|
||||||
|
#define EXP1_04_PIN 38
|
||||||
|
#define EXP1_05_PIN 37
|
||||||
|
#define EXP1_06_PIN 36
|
||||||
|
#define EXP1_07_PIN 34
|
||||||
|
#define EXP1_08_PIN 35
|
||||||
|
#define EXP1_09_PIN 40
|
||||||
|
#define EXP1_10_PIN 41
|
||||||
|
|
||||||
|
#define EXP2_01_PIN 49
|
||||||
|
#define EXP2_04_PIN 44
|
||||||
|
#define EXP2_05_PIN 51
|
||||||
|
#define EXP2_06_PIN 42
|
||||||
|
#define EXP2_07_PIN 53
|
||||||
|
#define EXP2_08_PIN 43
|
||||||
|
#define EXP2_09_PIN 52
|
||||||
|
#define EXP2_10_PIN 50
|
||||||
|
|
||||||
|
#if ENABLED(CR10_STOCKDISPLAY)
|
||||||
|
#define EXP3_03_PIN EXP1_03_PIN
|
||||||
|
#define EXP3_04_PIN EXP1_04_PIN
|
||||||
|
#define EXP3_05_PIN EXP1_05_PIN
|
||||||
|
#define EXP3_06_PIN EXP1_06_PIN
|
||||||
|
#define EXP3_07_PIN EXP1_07_PIN
|
||||||
|
#define EXP3_08_PIN EXP1_08_PIN
|
||||||
|
#define EXP3_09_PIN EXP1_09_PIN
|
||||||
|
#define EXP3_10_PIN EXP1_10_PIN
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/************************************/
|
||||||
|
/***** Configurations Section ******/
|
||||||
|
/************************************/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* This section starts with the pins_RAMPS_144.h as example, after if you need any new
|
||||||
|
* display, you could use normal duponts and connect it with with the scheme showed before.
|
||||||
|
* Tested:
|
||||||
|
* - Ender 3 Old display (Character LCD)
|
||||||
|
* - Ender 3 New Serial DWING Display
|
||||||
|
* - Reprap Display
|
||||||
|
* - Ender 5 New Serial Display
|
||||||
|
* - Any Reprap character display like
|
||||||
|
*/
|
||||||
|
|
||||||
|
#if HAS_WIRED_LCD
|
||||||
|
|
||||||
|
//
|
||||||
|
// LCD Display output pins
|
||||||
|
//
|
||||||
|
#if HAS_DWIN_E3V2 || IS_DWIN_MARLINUI
|
||||||
|
|
||||||
|
#if LCD_SERIAL_PORT != 1
|
||||||
|
#error "LCD_SERIAL_PORT should be 1 for this display."
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// DWIN Encoder
|
||||||
|
#define BTN_ENC EXP1_09_PIN
|
||||||
|
#define BTN_EN1 EXP1_08_PIN
|
||||||
|
#define BTN_EN2 EXP1_07_PIN
|
||||||
|
|
||||||
|
#ifndef BEEPER_PIN
|
||||||
|
#define BEEPER_PIN EXP1_10_PIN
|
||||||
|
#undef SPEAKER
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
|
||||||
|
|
||||||
|
// TO TEST
|
||||||
|
//#define LCD_PINS_RS EXP2_01_PIN // CS chip select /SS chip slave select
|
||||||
|
//#define LCD_PINS_ENABLE EXP2_05_PIN // SID (MOSI)
|
||||||
|
//#define LCD_PINS_D4 EXP2_09_PIN // SCK (CLK) clock
|
||||||
|
|
||||||
|
#elif BOTH(IS_NEWPANEL, PANEL_ONE)
|
||||||
|
|
||||||
|
// TO TEST
|
||||||
|
//#define LCD_PINS_RS EXP1_09_PIN
|
||||||
|
//#define LCD_PINS_ENABLE EXP2_06_PIN
|
||||||
|
//#define LCD_PINS_D4 57 // Mega/Due:65 - AGCM4:57
|
||||||
|
//#define LCD_PINS_D5 58 // Mega/Due:66 - AGCM4:58
|
||||||
|
//#define LCD_PINS_D6 EXP2_04_PIN
|
||||||
|
//#define LCD_PINS_D7 56 // Mega/Due:64 - AGCM4:56
|
||||||
|
|
||||||
|
#else
|
||||||
|
|
||||||
|
#if ENABLED(CR10_STOCKDISPLAY)
|
||||||
|
|
||||||
|
// TO TEST
|
||||||
|
#define LCD_PINS_RS EXP3_04_PIN
|
||||||
|
#define LCD_PINS_ENABLE EXP3_03_PIN
|
||||||
|
#define LCD_PINS_D4 EXP3_05_PIN
|
||||||
|
|
||||||
|
#if !IS_NEWPANEL
|
||||||
|
// TO TEST
|
||||||
|
//#define BEEPER_PIN EXP3_05_PIN
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#elif ENABLED(ZONESTAR_LCD)
|
||||||
|
|
||||||
|
// TO TEST
|
||||||
|
//#define LCD_PINS_RS 56 // Mega/Due:64 - AGCM4:56
|
||||||
|
//#define LCD_PINS_ENABLE EXP2_04_PIN
|
||||||
|
//#define LCD_PINS_D4 55 // Mega/Due:63 - AGCM4:55
|
||||||
|
//#define LCD_PINS_D5 EXP1_09_PIN
|
||||||
|
//#define LCD_PINS_D6 EXP2_06_PIN
|
||||||
|
//#define LCD_PINS_D7 57 // Mega/Due:65 - AGCM4:57
|
||||||
|
|
||||||
|
#else
|
||||||
|
|
||||||
|
#if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306)
|
||||||
|
// TO TEST
|
||||||
|
//#define LCD_PINS_DC 25 // Set as output on init
|
||||||
|
//#define LCD_PINS_RS 27 // Pull low for 1s to init
|
||||||
|
// DOGM SPI LCD Support
|
||||||
|
//#define DOGLCD_CS 16
|
||||||
|
//#define DOGLCD_MOSI 17
|
||||||
|
//#define DOGLCD_SCK 23
|
||||||
|
//#define DOGLCD_A0 LCD_PINS_DC
|
||||||
|
|
||||||
|
|
||||||
|
#else
|
||||||
|
// Definitions for any standard Display
|
||||||
|
#define LCD_PINS_RS EXP1_07_PIN
|
||||||
|
#define LCD_PINS_ENABLE EXP1_08_PIN
|
||||||
|
#define LCD_PINS_D4 EXP1_06_PIN
|
||||||
|
#define LCD_PINS_D5 EXP1_05_PIN
|
||||||
|
#define LCD_PINS_D6 EXP1_04_PIN
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define LCD_PINS_D7 EXP1_03_PIN
|
||||||
|
|
||||||
|
#if !IS_NEWPANEL
|
||||||
|
#define BEEPER_PIN EXP1_10_PIN
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if !IS_NEWPANEL
|
||||||
|
// Buttons attached to a shift register
|
||||||
|
// Not wired yet
|
||||||
|
//#define SHIFT_CLK_PIN EXP1_04_PIN
|
||||||
|
//#define SHIFT_LD_PIN EXP2_06_PIN
|
||||||
|
//#define SHIFT_OUT_PIN EXP1_09_PIN
|
||||||
|
//#define SHIFT_EN_PIN 17
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//
|
||||||
|
// LCD Display input pins
|
||||||
|
//
|
||||||
|
#if IS_NEWPANEL
|
||||||
|
|
||||||
|
#if IS_RRD_SC
|
||||||
|
|
||||||
|
#define BEEPER_PIN EXP1_10_PIN
|
||||||
|
|
||||||
|
#if ENABLED(CR10_STOCKDISPLAY)
|
||||||
|
// TO TEST
|
||||||
|
#define BTN_EN1 EXP3_08_PIN
|
||||||
|
#define BTN_EN2 EXP3_06_PIN
|
||||||
|
|
||||||
|
#else
|
||||||
|
// Definitions for any standard Display
|
||||||
|
#define BTN_EN1 EXP2_06_PIN
|
||||||
|
#define BTN_EN2 EXP2_08_PIN
|
||||||
|
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
|
||||||
|
#define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define BTN_ENC EXP1_09_PIN
|
||||||
|
#ifndef SD_DETECT_PIN
|
||||||
|
#define SD_DETECT_PIN EXP2_04_PIN
|
||||||
|
#endif
|
||||||
|
#define KILL_PIN EXP2_01_PIN
|
||||||
|
|
||||||
|
#if ENABLED(BQ_LCD_SMART_CONTROLLER)
|
||||||
|
//#define LCD_BACKLIGHT_PIN EXP1_03_PIN // TO TEST
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
|
||||||
|
|
||||||
|
// TO TEST
|
||||||
|
//#define BTN_EN1 56 // Mega/Due:64 - AGCM4:56
|
||||||
|
//#define BTN_EN2 72 // Mega/Due:59 - AGCM4:72
|
||||||
|
//#define BTN_ENC 55
|
||||||
|
//#define SD_DETECT_PIN EXP2_06_PIN
|
||||||
|
|
||||||
|
#elif ENABLED(LCD_I2C_PANELOLU2)
|
||||||
|
|
||||||
|
// TO TEST
|
||||||
|
//#define BTN_EN1 47
|
||||||
|
//#define BTN_EN2 EXP2_08_PIN
|
||||||
|
//#define BTN_ENC 32
|
||||||
|
//#define LCD_SDSS SDSS
|
||||||
|
//#define KILL_PIN EXP1_10_PIN
|
||||||
|
|
||||||
|
#elif ENABLED(LCD_I2C_VIKI)
|
||||||
|
|
||||||
|
// TO TEST
|
||||||
|
//#define BTN_EN1 EXP1_09_PIN // https://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42.
|
||||||
|
//#define BTN_EN2 EXP2_06_PIN
|
||||||
|
//#define BTN_ENC -1
|
||||||
|
|
||||||
|
//#define LCD_SDSS SDSS
|
||||||
|
//#define SD_DETECT_PIN EXP2_01_PIN
|
||||||
|
|
||||||
|
#elif ANY(VIKI2, miniVIKI)
|
||||||
|
|
||||||
|
// TO TEST
|
||||||
|
//#define DOGLCD_CS 45
|
||||||
|
//#define DOGLCD_A0 EXP2_04_PIN
|
||||||
|
//#define LCD_SCREEN_ROT_180
|
||||||
|
|
||||||
|
//#define BEEPER_PIN 33
|
||||||
|
//#define STAT_LED_RED_PIN 32
|
||||||
|
//#define STAT_LED_BLUE_PIN EXP1_08_PIN
|
||||||
|
|
||||||
|
//#define BTN_EN1 22
|
||||||
|
//#define BTN_EN2 7
|
||||||
|
//#define BTN_ENC EXP1_03_PIN
|
||||||
|
|
||||||
|
//#define SD_DETECT_PIN -1 // Pin 49 for display SD interface, 72 for easy adapter board
|
||||||
|
//#define KILL_PIN 31
|
||||||
|
|
||||||
|
#elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
|
||||||
|
|
||||||
|
// TO TEST
|
||||||
|
//#define DOGLCD_CS 29
|
||||||
|
//#define DOGLCD_A0 27
|
||||||
|
|
||||||
|
//#define BEEPER_PIN 23
|
||||||
|
//#define LCD_BACKLIGHT_PIN 33
|
||||||
|
|
||||||
|
//#define BTN_EN1 EXP1_08_PIN
|
||||||
|
//#define BTN_EN2 EXP1_05_PIN
|
||||||
|
//#define BTN_ENC 31
|
||||||
|
|
||||||
|
//#define LCD_SDSS SDSS
|
||||||
|
//#define SD_DETECT_PIN EXP2_01_PIN
|
||||||
|
//#define KILL_PIN EXP1_10_PIN
|
||||||
|
|
||||||
|
#elif EITHER(MKS_MINI_12864, FYSETC_MINI_12864)
|
||||||
|
|
||||||
|
// TO TEST
|
||||||
|
//#define BEEPER_PIN EXP1_05_PIN
|
||||||
|
//#define BTN_ENC EXP1_08_PIN
|
||||||
|
//#define SD_DETECT_PIN EXP2_01_PIN
|
||||||
|
|
||||||
|
//#ifndef KILL_PIN
|
||||||
|
// #define KILL_PIN EXP1_10_PIN
|
||||||
|
//#endif
|
||||||
|
|
||||||
|
#if ENABLED(MKS_MINI_12864)
|
||||||
|
|
||||||
|
// TO TEST
|
||||||
|
//#define DOGLCD_A0 27
|
||||||
|
//#define DOGLCD_CS 25
|
||||||
|
|
||||||
|
// GLCD features
|
||||||
|
// Uncomment screen orientation
|
||||||
|
//#define LCD_SCREEN_ROT_90
|
||||||
|
//#define LCD_SCREEN_ROT_180
|
||||||
|
//#define LCD_SCREEN_ROT_270
|
||||||
|
|
||||||
|
// not connected to a pin
|
||||||
|
//#define LCD_BACKLIGHT_PIN 57 // backlight LED on A11/D? (Mega/Due:65 - AGCM4:57)
|
||||||
|
|
||||||
|
//#define BTN_EN1 31
|
||||||
|
//#define BTN_EN2 33
|
||||||
|
|
||||||
|
#elif ENABLED(FYSETC_MINI_12864)
|
||||||
|
|
||||||
|
// From https://wiki.fysetc.com/Mini12864_Panel/?fbclid=IwAR1FyjuNdVOOy9_xzky3qqo_WeM5h-4gpRnnWhQr_O1Ef3h0AFnFXmCehK8
|
||||||
|
|
||||||
|
// TO TEST
|
||||||
|
//#define DOGLCD_A0 16
|
||||||
|
//#define DOGLCD_CS 17
|
||||||
|
|
||||||
|
//#define BTN_EN1 33
|
||||||
|
//#define BTN_EN2 31
|
||||||
|
|
||||||
|
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
|
||||||
|
// results in LCD soft SPI mode 3, SD soft SPI mode 0
|
||||||
|
|
||||||
|
//#define LCD_RESET_PIN 23 // Must be high or open for LCD to operate normally.
|
||||||
|
|
||||||
|
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
|
||||||
|
#ifndef RGB_LED_R_PIN
|
||||||
|
// TO TEST
|
||||||
|
//#define RGB_LED_R_PIN 25
|
||||||
|
#endif
|
||||||
|
#ifndef RGB_LED_G_PIN
|
||||||
|
// TO TEST
|
||||||
|
//#define RGB_LED_G_PIN 27
|
||||||
|
#endif
|
||||||
|
#ifndef RGB_LED_B_PIN
|
||||||
|
// TO TEST
|
||||||
|
//#define RGB_LED_B_PIN 29
|
||||||
|
#endif
|
||||||
|
#elif ENABLED(FYSETC_MINI_12864_2_1)
|
||||||
|
// TO TEST
|
||||||
|
//#define NEOPIXEL_PIN 25
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#elif ENABLED(MINIPANEL)
|
||||||
|
|
||||||
|
// TO TEST
|
||||||
|
//#define BEEPER_PIN EXP2_06_PIN
|
||||||
|
// not connected to a pin
|
||||||
|
//#define LCD_BACKLIGHT_PIN 57 // backlight LED on A11/D? (Mega/Due:65 - AGCM4:57)
|
||||||
|
|
||||||
|
//#define DOGLCD_A0 EXP2_04_PIN
|
||||||
|
//#define DOGLCD_CS 58 // Mega/Due:66 - AGCM4:58
|
||||||
|
|
||||||
|
// GLCD features
|
||||||
|
// Uncomment screen orientation
|
||||||
|
//#define LCD_SCREEN_ROT_90
|
||||||
|
//#define LCD_SCREEN_ROT_180
|
||||||
|
//#define LCD_SCREEN_ROT_270
|
||||||
|
|
||||||
|
//#define BTN_EN1 EXP1_09_PIN
|
||||||
|
//#define BTN_EN2 55 // Mega/Due:63 - AGCM4:55
|
||||||
|
//#define BTN_ENC 72 // Mega/Due:59 - AGCM4:72
|
||||||
|
|
||||||
|
//#define SD_DETECT_PIN EXP2_01_PIN
|
||||||
|
//#define KILL_PIN 56 // Mega/Due:64 - AGCM4:56
|
||||||
|
|
||||||
|
#elif ENABLED(ZONESTAR_LCD)
|
||||||
|
|
||||||
|
// TO TEST
|
||||||
|
//#define ADC_KEYPAD_PIN 12
|
||||||
|
|
||||||
|
#elif ENABLED(AZSMZ_12864)
|
||||||
|
|
||||||
|
// TO TEST
|
||||||
|
|
||||||
|
#else
|
||||||
|
|
||||||
|
// Beeper on AUX-4
|
||||||
|
//#define BEEPER_PIN 33
|
||||||
|
|
||||||
|
// Buttons are directly attached to AUX-2
|
||||||
|
#if IS_RRW_KEYPAD
|
||||||
|
// TO TEST
|
||||||
|
//#define SHIFT_OUT_PIN EXP1_09_PIN
|
||||||
|
//#define SHIFT_CLK_PIN EXP2_04_PIN
|
||||||
|
//#define SHIFT_LD_PIN EXP2_06_PIN
|
||||||
|
//#define BTN_EN1 56 // Mega/Due:64 - AGCM4:56
|
||||||
|
//#define BTN_EN2 72 // Mega/Due:59 - AGCM4:72
|
||||||
|
//#define BTN_ENC 55 // Mega/Due:63 - AGCM4:55
|
||||||
|
#elif ENABLED(PANEL_ONE)
|
||||||
|
// TO TEST
|
||||||
|
//#define BTN_EN1 72 // AUX2 PIN 3 (Mega/Due:59 - AGCM4:72)
|
||||||
|
//#define BTN_EN2 55 // AUX2 PIN 4 (Mega/Due:63 - AGCM4:55)
|
||||||
|
//#define BTN_ENC EXP2_01_PIN // AUX3 PIN 7
|
||||||
|
#else
|
||||||
|
// TO TEST
|
||||||
|
//#define BTN_EN1 EXP1_05_PIN
|
||||||
|
//#define BTN_EN2 EXP1_08_PIN
|
||||||
|
//#define BTN_ENC 31
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if ENABLED(G3D_PANEL)
|
||||||
|
// TO TEST
|
||||||
|
//#define SD_DETECT_PIN EXP2_01_PIN
|
||||||
|
//#define KILL_PIN EXP1_10_PIN
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif
|
||||||
|
#endif // IS_NEWPANEL
|
||||||
|
|
||||||
|
#endif // HAS_WIRED_LCD
|
||||||
|
|
||||||
|
//
|
||||||
|
// SD Support
|
||||||
|
//
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Bricolemon has an SD slot, but to change it to your LCD or Custom, set the option to one of the following:
|
||||||
|
*
|
||||||
|
* LCD - Use the SD drive in the external LCD controller.
|
||||||
|
* ONBOARD - Use the SD drive on the control board.
|
||||||
|
* CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
|
||||||
|
*
|
||||||
|
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef SDCARD_CONNECTION
|
||||||
|
#define SDCARD_CONNECTION ONBOARD
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if SD_CONNECTION_IS(ONBOARD)
|
||||||
|
#define SDSS 83
|
||||||
|
#undef SD_DETECT_PIN
|
||||||
|
#define SD_DETECT_PIN 95
|
||||||
|
#else
|
||||||
|
#define SDSS EXP2_07_PIN
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if HAS_TMC_UART
|
||||||
|
/**
|
||||||
|
* Address for the UART Configuration of the TMC2209. Override in Configuration files.
|
||||||
|
* To test TMC2209 Steppers enable TMC_DEBUG in Configuration_adv.h and test the M122 command with voltage on the steppers.
|
||||||
|
*/
|
||||||
|
#ifndef X_SLAVE_ADDRESS
|
||||||
|
#define X_SLAVE_ADDRESS 0b00
|
||||||
|
#endif
|
||||||
|
#ifndef Y_SLAVE_ADDRESS
|
||||||
|
#define Y_SLAVE_ADDRESS 0b01
|
||||||
|
#endif
|
||||||
|
#ifndef Z_SLAVE_ADDRESS
|
||||||
|
#define Z_SLAVE_ADDRESS 0b10
|
||||||
|
#endif
|
||||||
|
#ifndef E0_SLAVE_ADDRESS
|
||||||
|
#define E0_SLAVE_ADDRESS 0b11
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/**
|
||||||
|
* TMC2208/TMC2209 stepper drivers
|
||||||
|
* It seems to work perfectly fine on Software Serial, if an advanced user wants to test, you could use the SAMD51 Serial1 and Serial 2. Be careful with the Sercom configurations.
|
||||||
|
*/
|
||||||
|
//#define X_HARDWARE_SERIAL Serial1
|
||||||
|
//#define Y_HARDWARE_SERIAL Serial1
|
||||||
|
//#define Z_HARDWARE_SERIAL Serial1
|
||||||
|
//#define E0_HARDWARE_SERIAL Serial1
|
||||||
|
|
||||||
|
// This is the stable default value after testing, but, higher UART rates could be configured, remeber to test the Steppers with the M122 command to check if everything works.
|
||||||
|
#define TMC_BAUD_RATE 250000
|
||||||
|
|
||||||
|
//
|
||||||
|
// Software serial
|
||||||
|
//
|
||||||
|
#define X_SERIAL_TX_PIN 0
|
||||||
|
#define X_SERIAL_RX_PIN 1
|
||||||
|
|
||||||
|
#define Y_SERIAL_TX_PIN X_SERIAL_TX_PIN
|
||||||
|
#define Y_SERIAL_RX_PIN X_SERIAL_RX_PIN
|
||||||
|
|
||||||
|
#define Z_SERIAL_TX_PIN X_SERIAL_TX_PIN
|
||||||
|
#define Z_SERIAL_RX_PIN X_SERIAL_RX_PIN
|
||||||
|
|
||||||
|
#define E0_SERIAL_TX_PIN X_SERIAL_TX_PIN
|
||||||
|
#define E0_SERIAL_RX_PIN X_SERIAL_RX_PIN
|
||||||
|
|
||||||
|
#endif
|
||||||
676
Marlin/src/pins/samd/pins_BRICOLEMON_V1_0.h
Normal file
676
Marlin/src/pins/samd/pins_BRICOLEMON_V1_0.h
Normal file
@ -0,0 +1,676 @@
|
|||||||
|
/**
|
||||||
|
* Marlin 3D Printer Firmware
|
||||||
|
* Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
|
*
|
||||||
|
* Based on Sprinter and grbl.
|
||||||
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 3 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
/**
|
||||||
|
* BRICOLEMON Board. Based on ATSAMD51 (AGCM4), bootloader and credits by ADAFRUIT.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#if NOT_TARGET(ARDUINO_GRAND_CENTRAL_M4)
|
||||||
|
#error "Oops! Select 'Adafruit Grand Central M4' in 'Tools > Board.'"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef BOARD_INFO_NAME
|
||||||
|
#define BOARD_INFO_NAME "BRICOLEMON V1.0" // , Lemoncrest & BricoGeek collaboration.
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/**
|
||||||
|
* BRICOLEMON Board. Based on atsamd51 (AGCM4), bootloader and credits by ADAFRUIT.
|
||||||
|
* This board its a 3.3V LOGIC Board, following the ADAFRUIT example, all of the board is open source.
|
||||||
|
* Schematic: https://github.com/bricogeek/bricolemon/blob/master/Documentacion/Bricolemon/EsquemaBricolemon_REVB.pdf
|
||||||
|
* 3DSTEP: https://github.com/bricogeek/bricolemon/blob/master/Documentacion/Bricolemon/BricolemonREVB.step
|
||||||
|
* PinDemux: https://github.com/bricogeek/bricolemon/blob/master/Documentacion/Bricolemon/PinDEMUX.xlsx
|
||||||
|
*
|
||||||
|
* NOTE: We need the Serial port on the -1 to make it work!!. Remember to change it on configuration.h #define SERIAL_PORT -1
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* EEPROM EMULATION: Works with some bugs already, but the board needs an I2C EEPROM memory soldered on.
|
||||||
|
*/
|
||||||
|
//#define FLASH_EEPROM_EMULATION
|
||||||
|
#define I2C_EEPROM // EEPROM on I2C-0
|
||||||
|
#define MARLIN_EEPROM_SIZE 0x70000 // 512K (CAT24C512)
|
||||||
|
|
||||||
|
//This its another option to emulate an EEPROM, but its more efficient to dont loose the data the first One.
|
||||||
|
//#define SDCARD_EEPROM_EMULATION
|
||||||
|
|
||||||
|
//
|
||||||
|
// BLTouch
|
||||||
|
//
|
||||||
|
#define SERVO0_PIN 33 // BLTouch PWM
|
||||||
|
|
||||||
|
//
|
||||||
|
// Limit Switches
|
||||||
|
//
|
||||||
|
#define X_STOP_PIN 10
|
||||||
|
#define Y_STOP_PIN 11
|
||||||
|
#define Z_STOP_PIN 12
|
||||||
|
|
||||||
|
/**
|
||||||
|
* NOTE: Useful if extra TMC2209 are to be used as independent axes.
|
||||||
|
* We need to configure the new digital PIN, for this we could configure on the board the extra pin of this stepper, for example as a MIN_PIN/MAX_PIN. This pin is the D14.
|
||||||
|
*/
|
||||||
|
//#define Z2_STOP_PIN 14
|
||||||
|
//#define X2_STOP_PIN 14
|
||||||
|
//#define Y2_STOP_PIN 14
|
||||||
|
|
||||||
|
//
|
||||||
|
// Z Probe (when not Z_MIN_PIN)
|
||||||
|
//
|
||||||
|
#ifndef Z_MIN_PROBE_PIN
|
||||||
|
#define Z_MIN_PROBE_PIN 12
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//
|
||||||
|
// Steppers
|
||||||
|
//
|
||||||
|
#define X_STEP_PIN 3
|
||||||
|
#define X_DIR_PIN 22
|
||||||
|
#define X_ENABLE_PIN 26
|
||||||
|
|
||||||
|
#define Y_STEP_PIN 4
|
||||||
|
#define Y_DIR_PIN 23
|
||||||
|
#define Y_ENABLE_PIN 27
|
||||||
|
|
||||||
|
#define Z_STEP_PIN 5
|
||||||
|
#define Z_DIR_PIN 24
|
||||||
|
#define Z_ENABLE_PIN 28
|
||||||
|
|
||||||
|
#define E0_STEP_PIN 2
|
||||||
|
#define E0_DIR_PIN 25
|
||||||
|
#define E0_ENABLE_PIN 29
|
||||||
|
|
||||||
|
#define E1_STEP_PIN 13
|
||||||
|
#define E1_DIR_PIN 46
|
||||||
|
#define E1_ENABLE_PIN 47
|
||||||
|
|
||||||
|
// Filament runout. You may choose to use this pin for some other purpose. It's a normal GPIO that can be configured as I/O.
|
||||||
|
// For example, a switch to detect any kind of behavior, Power supply pin .... etc.
|
||||||
|
#define FIL_RUNOUT_PIN 32
|
||||||
|
|
||||||
|
// This board have the option to use an extra TMC2209 stepper, one of the use could be as a second extruder.
|
||||||
|
#if EXTRUDERS < 2
|
||||||
|
// TODO: Corregir aquí que cuando tenemos dos extrusores o lo que sea, utiliza los endstop que le sobran, osea los max, no hay Z2_endstop
|
||||||
|
#if NUM_Z_STEPPER_DRIVERS > 1
|
||||||
|
#define Z2_STOP_PIN 14
|
||||||
|
#endif
|
||||||
|
#else
|
||||||
|
// If we want to configure the extra stepper as a Extruder, we should have undef all of the extra motors.
|
||||||
|
#undef X2_DRIVER_TYPE
|
||||||
|
#undef Y2_DRIVER_TYPE
|
||||||
|
#undef Z2_DRIVER_TYPE
|
||||||
|
#undef Z3_DRIVER_TYPE
|
||||||
|
#undef Z4_DRIVER_TYPE
|
||||||
|
|
||||||
|
// Si tenemos más de un extrusor lo que hacemos es definir el nuevo extrusor así como sus pines
|
||||||
|
// Acordarse de definir el #define TEMP_SENSOR_1, ya que este contiene el tipo de sonda del extrusor E1
|
||||||
|
|
||||||
|
#define FIL_RUNOUT2_PIN 14
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//
|
||||||
|
// Extruder / Bed
|
||||||
|
//
|
||||||
|
|
||||||
|
// Temperature Sensors
|
||||||
|
#define TEMP_0_PIN 1
|
||||||
|
|
||||||
|
// You could use one of the ADC for a temp chamber if you don't use the second extruder, for example.
|
||||||
|
#if TEMP_SENSOR_CHAMBER > 0
|
||||||
|
#define TEMP_CHAMBER_PIN 3
|
||||||
|
#else
|
||||||
|
#define TEMP_1_PIN 3
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define TEMP_BED_PIN 2
|
||||||
|
|
||||||
|
//
|
||||||
|
// Heaters / Fans
|
||||||
|
//
|
||||||
|
#define HEATER_0_PIN 6
|
||||||
|
#define HEATER_1_PIN 45
|
||||||
|
#define HEATER_BED_PIN 7
|
||||||
|
|
||||||
|
// The board has 4 PWM fans, use and configure as desired
|
||||||
|
#define FAN_PIN 8
|
||||||
|
#define FAN1_PIN 9
|
||||||
|
#define FAN2_PIN 30
|
||||||
|
#define FAN3_PIN 31
|
||||||
|
|
||||||
|
//
|
||||||
|
// LCD / Controller
|
||||||
|
//
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Bricolemon Expansion connectors
|
||||||
|
*
|
||||||
|
* ------ ------
|
||||||
|
* VCC | 1 2 | GND KILL | 1 2 | GND
|
||||||
|
* LCD7 | 3 4 | LCDD6 RESET | 3 4 | SD_DETECT
|
||||||
|
* LCD5 | 5 6 LCDD4 MOSI | 5 6 BTN_EN1
|
||||||
|
* LCDRS | 7 8 | LCDDE SS | 7 8 | BTN_EN2
|
||||||
|
* BTN_ENCODER | 9 10 | BEEPER SCLK | 9 10 | MISO
|
||||||
|
* ------ ------
|
||||||
|
* EXP1 EXP2
|
||||||
|
*
|
||||||
|
*- This extra connector is for a serial display like the MKS TFT.
|
||||||
|
* MKS TFT
|
||||||
|
* ------
|
||||||
|
* RX0 | . . | NC
|
||||||
|
* TX0 | . . NC
|
||||||
|
* GND | . . GND
|
||||||
|
* 5B | . . | 5V
|
||||||
|
* ------
|
||||||
|
*
|
||||||
|
*- Special mapping of EXP1 to EXP3 to work with Ender displays.
|
||||||
|
*
|
||||||
|
* Enable CR10_STOCKDISPLAY in Configuration.h and connect EXP1 to the display EXP3 with this mapping.
|
||||||
|
* ------
|
||||||
|
* VCC | 1 2 | GND
|
||||||
|
* LCDDE | 3 4 | LCDRS
|
||||||
|
* LCDD4 | 5 6 BTN_EN2
|
||||||
|
* RESET | 7 8 | BTN_EN1
|
||||||
|
* BTN_ENCODER | 9 10 | BEEPER
|
||||||
|
* ------
|
||||||
|
*
|
||||||
|
*- Digital pinout reference of the Bricolemon for advanced users/configurations.
|
||||||
|
*
|
||||||
|
* ------ ------
|
||||||
|
* VCC | 1 2 | GND D49 | 1 2 | GND
|
||||||
|
* D39 | 3 4 | D38 RST | 3 4 | D44
|
||||||
|
* D37 | 5 6 D36 D51 | 5 6 D42
|
||||||
|
* D34 | 7 8 | D35 D53 | 7 8 | D43
|
||||||
|
* D40 | 9 10 | D41 D52 | 9 10 | D50
|
||||||
|
* ------ ------
|
||||||
|
* EXP1 EXP2
|
||||||
|
*
|
||||||
|
*- Pin table overview
|
||||||
|
* LCD--- SPI---
|
||||||
|
* LCD4 36 MISO 50
|
||||||
|
* LCD5 37 SS 53
|
||||||
|
* LCD6 38 SCKL 52
|
||||||
|
* LCD7 39 MOSI 51
|
||||||
|
* LCDRS 34 BEEPER
|
||||||
|
* LCDDE 35 BEEP 41
|
||||||
|
* ENCODER--- SD-CARD---
|
||||||
|
* BTN_EN1 42 SD_DETECT 44
|
||||||
|
* BTN_EN2 43 KILL_PIN 49
|
||||||
|
* BTN_ENCODER 40
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define EXP1_03_PIN 39
|
||||||
|
#define EXP1_04_PIN 38
|
||||||
|
#define EXP1_05_PIN 37
|
||||||
|
#define EXP1_06_PIN 36
|
||||||
|
#define EXP1_07_PIN 34
|
||||||
|
#define EXP1_08_PIN 35
|
||||||
|
#define EXP1_09_PIN 40
|
||||||
|
#define EXP1_10_PIN 41
|
||||||
|
|
||||||
|
#define EXP2_01_PIN 49
|
||||||
|
#define EXP2_04_PIN 44
|
||||||
|
#define EXP2_05_PIN 51
|
||||||
|
#define EXP2_06_PIN 42
|
||||||
|
#define EXP2_07_PIN 53
|
||||||
|
#define EXP2_08_PIN 43
|
||||||
|
#define EXP2_09_PIN 52
|
||||||
|
#define EXP2_10_PIN 50
|
||||||
|
|
||||||
|
#if ENABLED(CR10_STOCKDISPLAY)
|
||||||
|
#define EXP3_03_PIN EXP1_03_PIN
|
||||||
|
#define EXP3_04_PIN EXP1_04_PIN
|
||||||
|
#define EXP3_05_PIN EXP1_05_PIN
|
||||||
|
#define EXP3_06_PIN EXP1_06_PIN
|
||||||
|
#define EXP3_07_PIN EXP1_07_PIN
|
||||||
|
#define EXP3_08_PIN EXP1_08_PIN
|
||||||
|
#define EXP3_09_PIN EXP1_09_PIN
|
||||||
|
#define EXP3_10_PIN EXP1_10_PIN
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/************************************/
|
||||||
|
/***** Configurations Section ******/
|
||||||
|
/************************************/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* This sections starts with the pins_RAMPS_144.h as example, after if you need any new
|
||||||
|
* display, you could use normal duponts and connect it with with the scheme showed before.
|
||||||
|
* Tested:
|
||||||
|
* - Ender 3 Old display (Character LCD)
|
||||||
|
* - Ender 3 New Serial DWING Display
|
||||||
|
* - Reprap Display
|
||||||
|
* - Ender 5 New Serial Display
|
||||||
|
* - Any Reprap character display like
|
||||||
|
*/
|
||||||
|
|
||||||
|
#if HAS_WIRED_LCD
|
||||||
|
|
||||||
|
//
|
||||||
|
// LCD Display output pins
|
||||||
|
//
|
||||||
|
|
||||||
|
#if HAS_DWIN_E3V2 || IS_DWIN_MARLINUI
|
||||||
|
|
||||||
|
#if LCD_SERIAL_PORT != 1
|
||||||
|
#error "LCD_SERIAL_PORT should be 1 for this display."
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// DWIN Encoder
|
||||||
|
#define BTN_ENC EXP1_09_PIN
|
||||||
|
#define BTN_EN1 EXP1_08_PIN
|
||||||
|
#define BTN_EN2 EXP1_07_PIN
|
||||||
|
|
||||||
|
#ifndef BEEPER_PIN
|
||||||
|
#define BEEPER_PIN EXP1_10_PIN
|
||||||
|
#undef SPEAKER
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
|
||||||
|
|
||||||
|
// TO TEST
|
||||||
|
//#define LCD_PINS_RS EXP2_01_PIN // CS chip select /SS chip slave select
|
||||||
|
//#define LCD_PINS_ENABLE EXP2_05_PIN // SID (MOSI)
|
||||||
|
//#define LCD_PINS_D4 EXP2_09_PIN // SCK (CLK) clock
|
||||||
|
|
||||||
|
#elif BOTH(IS_NEWPANEL, PANEL_ONE)
|
||||||
|
|
||||||
|
// TO TEST
|
||||||
|
//#define LCD_PINS_RS EXP1_09_PIN
|
||||||
|
//#define LCD_PINS_ENABLE EXP2_06_PIN
|
||||||
|
//#define LCD_PINS_D4 57 // Mega/Due:65 - AGCM4:57
|
||||||
|
//#define LCD_PINS_D5 58 // Mega/Due:66 - AGCM4:58
|
||||||
|
//#define LCD_PINS_D6 EXP2_04_PIN
|
||||||
|
//#define LCD_PINS_D7 56 // Mega/Due:64 - AGCM4:56
|
||||||
|
|
||||||
|
#else
|
||||||
|
|
||||||
|
#if ENABLED(CR10_STOCKDISPLAY)
|
||||||
|
|
||||||
|
// TO TEST
|
||||||
|
#define LCD_PINS_RS EXP3_04_PIN
|
||||||
|
#define LCD_PINS_ENABLE EXP3_03_PIN
|
||||||
|
#define LCD_PINS_D4 EXP3_05_PIN
|
||||||
|
|
||||||
|
#if !IS_NEWPANEL
|
||||||
|
// TO TEST
|
||||||
|
//#define BEEPER_PIN EXP3_05_PIN
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#elif ENABLED(ZONESTAR_LCD)
|
||||||
|
|
||||||
|
// TO TEST
|
||||||
|
//#define LCD_PINS_RS 56 // Mega/Due:64 - AGCM4:56
|
||||||
|
//#define LCD_PINS_ENABLE EXP2_04_PIN
|
||||||
|
//#define LCD_PINS_D4 55 // Mega/Due:63 - AGCM4:55
|
||||||
|
//#define LCD_PINS_D5 EXP1_09_PIN
|
||||||
|
//#define LCD_PINS_D6 EXP2_06_PIN
|
||||||
|
//#define LCD_PINS_D7 57 // Mega/Due:65 - AGCM4:57
|
||||||
|
|
||||||
|
#else
|
||||||
|
|
||||||
|
#if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306)
|
||||||
|
// TO TEST
|
||||||
|
//#define LCD_PINS_DC 25 // Set as output on init
|
||||||
|
//#define LCD_PINS_RS 27 // Pull low for 1s to init
|
||||||
|
// DOGM SPI LCD Support
|
||||||
|
//#define DOGLCD_CS 16
|
||||||
|
//#define DOGLCD_MOSI 17
|
||||||
|
//#define DOGLCD_SCK 23
|
||||||
|
//#define DOGLCD_A0 LCD_PINS_DC
|
||||||
|
|
||||||
|
#else
|
||||||
|
// Definitions for any standard Display
|
||||||
|
#define LCD_PINS_RS EXP1_07_PIN
|
||||||
|
#define LCD_PINS_ENABLE EXP1_08_PIN
|
||||||
|
#define LCD_PINS_D4 EXP1_06_PIN
|
||||||
|
#define LCD_PINS_D5 EXP1_05_PIN
|
||||||
|
#define LCD_PINS_D6 EXP1_04_PIN
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define LCD_PINS_D7 EXP1_03_PIN
|
||||||
|
|
||||||
|
#if !IS_NEWPANEL
|
||||||
|
#define BEEPER_PIN EXP1_10_PIN
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if !IS_NEWPANEL
|
||||||
|
// Buttons attached to a shift register
|
||||||
|
// Not wired yet
|
||||||
|
//#define SHIFT_CLK_PIN EXP1_04_PIN
|
||||||
|
//#define SHIFT_LD_PIN EXP2_06_PIN
|
||||||
|
//#define SHIFT_OUT_PIN EXP1_09_PIN
|
||||||
|
//#define SHIFT_EN_PIN 17
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//
|
||||||
|
// LCD Display input pins
|
||||||
|
//
|
||||||
|
#if IS_NEWPANEL
|
||||||
|
|
||||||
|
#if IS_RRD_SC
|
||||||
|
|
||||||
|
#define BEEPER_PIN EXP1_10_PIN
|
||||||
|
|
||||||
|
#if ENABLED(CR10_STOCKDISPLAY)
|
||||||
|
// TO TEST
|
||||||
|
#define BTN_EN1 EXP1_08_PIN
|
||||||
|
#define BTN_EN2 EXP1_06_PIN
|
||||||
|
#else
|
||||||
|
// Definitions fpr any standard Display
|
||||||
|
#define BTN_EN1 EXP2_06_PIN
|
||||||
|
#define BTN_EN2 EXP2_08_PIN
|
||||||
|
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
|
||||||
|
#define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define BTN_ENC EXP1_09_PIN
|
||||||
|
#ifndef SD_DETECT_PIN
|
||||||
|
#define SD_DETECT_PIN EXP2_04_PIN
|
||||||
|
#endif
|
||||||
|
#define KILL_PIN EXP2_01_PIN
|
||||||
|
|
||||||
|
#if ENABLED(BQ_LCD_SMART_CONTROLLER)
|
||||||
|
//#define LCD_BACKLIGHT_PIN EXP1_03_PIN // TO TEST
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
|
||||||
|
|
||||||
|
// TO TEST
|
||||||
|
//#define BTN_EN1 56 // Mega/Due:64 - AGCM4:56
|
||||||
|
//#define BTN_EN2 72 // Mega/Due:59 - AGCM4:72
|
||||||
|
//#define BTN_ENC 55
|
||||||
|
//#define SD_DETECT_PIN EXP2_06_PIN
|
||||||
|
|
||||||
|
#elif ENABLED(LCD_I2C_PANELOLU2)
|
||||||
|
|
||||||
|
// TO TEST
|
||||||
|
//#define BTN_EN1 47
|
||||||
|
//#define BTN_EN2 EXP2_08_PIN
|
||||||
|
//#define BTN_ENC 32
|
||||||
|
//#define LCD_SDSS SDSS
|
||||||
|
//#define KILL_PIN EXP1_10_PIN
|
||||||
|
|
||||||
|
#elif ENABLED(LCD_I2C_VIKI)
|
||||||
|
|
||||||
|
// TO TEST
|
||||||
|
//#define BTN_EN1 EXP1_09_PIN // https://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42.
|
||||||
|
//#define BTN_EN2 EXP2_06_PIN
|
||||||
|
//#define BTN_ENC -1
|
||||||
|
|
||||||
|
//#define LCD_SDSS SDSS
|
||||||
|
//#define SD_DETECT_PIN EXP2_01_PIN
|
||||||
|
|
||||||
|
#elif ANY(VIKI2, miniVIKI)
|
||||||
|
|
||||||
|
// TO TEST
|
||||||
|
//#define DOGLCD_CS 45
|
||||||
|
//#define DOGLCD_A0 EXP2_04_PIN
|
||||||
|
//#define LCD_SCREEN_ROT_180
|
||||||
|
|
||||||
|
//#define BEEPER_PIN 33
|
||||||
|
//#define STAT_LED_RED_PIN 32
|
||||||
|
//#define STAT_LED_BLUE_PIN EXP1_08_PIN
|
||||||
|
|
||||||
|
//#define BTN_EN1 22
|
||||||
|
//#define BTN_EN2 7
|
||||||
|
//#define BTN_ENC EXP1_03_PIN
|
||||||
|
|
||||||
|
//#define SD_DETECT_PIN -1 // Pin 49 for display SD interface, 72 for easy adapter board
|
||||||
|
//#define KILL_PIN 31
|
||||||
|
|
||||||
|
#elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
|
||||||
|
|
||||||
|
// TO TEST
|
||||||
|
//#define DOGLCD_CS 29
|
||||||
|
//#define DOGLCD_A0 27
|
||||||
|
|
||||||
|
//#define BEEPER_PIN 23
|
||||||
|
//#define LCD_BACKLIGHT_PIN 33
|
||||||
|
|
||||||
|
//#define BTN_EN1 EXP1_08_PIN
|
||||||
|
//#define BTN_EN2 EXP1_05_PIN
|
||||||
|
//#define BTN_ENC 31
|
||||||
|
|
||||||
|
//#define LCD_SDSS SDSS
|
||||||
|
//#define SD_DETECT_PIN EXP2_01_PIN
|
||||||
|
//#define KILL_PIN EXP1_10_PIN
|
||||||
|
|
||||||
|
#elif EITHER(MKS_MINI_12864, FYSETC_MINI_12864)
|
||||||
|
|
||||||
|
// TO TEST
|
||||||
|
//#define BEEPER_PIN EXP1_05_PIN
|
||||||
|
//#define BTN_ENC EXP1_08_PIN
|
||||||
|
//#define SD_DETECT_PIN EXP2_01_PIN
|
||||||
|
|
||||||
|
//#ifndef KILL_PIN
|
||||||
|
// #define KILL_PIN EXP1_10_PIN
|
||||||
|
//#endif
|
||||||
|
|
||||||
|
#if ENABLED(MKS_MINI_12864)
|
||||||
|
|
||||||
|
// TO TEST
|
||||||
|
//#define DOGLCD_A0 27
|
||||||
|
//#define DOGLCD_CS 25
|
||||||
|
|
||||||
|
// GLCD features
|
||||||
|
// Uncomment screen orientation
|
||||||
|
//#define LCD_SCREEN_ROT_90
|
||||||
|
//#define LCD_SCREEN_ROT_180
|
||||||
|
//#define LCD_SCREEN_ROT_270
|
||||||
|
|
||||||
|
// not connected to a pin
|
||||||
|
//#define LCD_BACKLIGHT_PIN 57 // backlight LED on A11/D? (Mega/Due:65 - AGCM4:57)
|
||||||
|
|
||||||
|
//#define BTN_EN1 31
|
||||||
|
//#define BTN_EN2 33
|
||||||
|
|
||||||
|
#elif ENABLED(FYSETC_MINI_12864)
|
||||||
|
|
||||||
|
// From https://wiki.fysetc.com/Mini12864_Panel/?fbclid=IwAR1FyjuNdVOOy9_xzky3qqo_WeM5h-4gpRnnWhQr_O1Ef3h0AFnFXmCehK8
|
||||||
|
|
||||||
|
// TO TEST
|
||||||
|
//#define DOGLCD_A0 16
|
||||||
|
//#define DOGLCD_CS 17
|
||||||
|
|
||||||
|
//#define BTN_EN1 33
|
||||||
|
//#define BTN_EN2 31
|
||||||
|
|
||||||
|
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
|
||||||
|
// results in LCD soft SPI mode 3, SD soft SPI mode 0
|
||||||
|
|
||||||
|
//#define LCD_RESET_PIN 23 // Must be high or open for LCD to operate normally.
|
||||||
|
|
||||||
|
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
|
||||||
|
#ifndef RGB_LED_R_PIN
|
||||||
|
// TO TEST
|
||||||
|
//#define RGB_LED_R_PIN 25
|
||||||
|
#endif
|
||||||
|
#ifndef RGB_LED_G_PIN
|
||||||
|
// TO TEST
|
||||||
|
//#define RGB_LED_G_PIN 27
|
||||||
|
#endif
|
||||||
|
#ifndef RGB_LED_B_PIN
|
||||||
|
// TO TEST
|
||||||
|
//#define RGB_LED_B_PIN 29
|
||||||
|
#endif
|
||||||
|
#elif ENABLED(FYSETC_MINI_12864_2_1)
|
||||||
|
// TO TEST
|
||||||
|
//#define NEOPIXEL_PIN 25
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#elif ENABLED(MINIPANEL)
|
||||||
|
|
||||||
|
// TO TEST
|
||||||
|
//#define BEEPER_PIN EXP2_06_PIN
|
||||||
|
// not connected to a pin
|
||||||
|
//#define LCD_BACKLIGHT_PIN 57 // backlight LED on A11/D? (Mega/Due:65 - AGCM4:57)
|
||||||
|
|
||||||
|
//#define DOGLCD_A0 EXP2_04_PIN
|
||||||
|
//#define DOGLCD_CS 58 // Mega/Due:66 - AGCM4:58
|
||||||
|
|
||||||
|
// GLCD features
|
||||||
|
// Uncomment screen orientation
|
||||||
|
//#define LCD_SCREEN_ROT_90
|
||||||
|
//#define LCD_SCREEN_ROT_180
|
||||||
|
//#define LCD_SCREEN_ROT_270
|
||||||
|
|
||||||
|
//#define BTN_EN1 EXP1_09_PIN
|
||||||
|
//#define BTN_EN2 55 // Mega/Due:63 - AGCM4:55
|
||||||
|
//#define BTN_ENC 72 // Mega/Due:59 - AGCM4:72
|
||||||
|
|
||||||
|
//#define SD_DETECT_PIN EXP2_01_PIN
|
||||||
|
//#define KILL_PIN 56 // Mega/Due:64 - AGCM4:56
|
||||||
|
|
||||||
|
#elif ENABLED(ZONESTAR_LCD)
|
||||||
|
|
||||||
|
// TO TEST
|
||||||
|
//#define ADC_KEYPAD_PIN 12
|
||||||
|
|
||||||
|
#elif ENABLED(AZSMZ_12864)
|
||||||
|
|
||||||
|
// TO TEST
|
||||||
|
|
||||||
|
#else
|
||||||
|
|
||||||
|
// Beeper on AUX-4
|
||||||
|
//#define BEEPER_PIN 33
|
||||||
|
|
||||||
|
// Buttons are directly attached to AUX-2
|
||||||
|
#if IS_RRW_KEYPAD
|
||||||
|
// TO TEST
|
||||||
|
//#define SHIFT_OUT_PIN EXP1_09_PIN
|
||||||
|
//#define SHIFT_CLK_PIN EXP2_04_PIN
|
||||||
|
//#define SHIFT_LD_PIN EXP2_06_PIN
|
||||||
|
//#define BTN_EN1 56 // Mega/Due:64 - AGCM4:56
|
||||||
|
//#define BTN_EN2 72 // Mega/Due:59 - AGCM4:72
|
||||||
|
//#define BTN_ENC 55 // Mega/Due:63 - AGCM4:55
|
||||||
|
#elif ENABLED(PANEL_ONE)
|
||||||
|
// TO TEST
|
||||||
|
//#define BTN_EN1 72 // AUX2 PIN 3 (Mega/Due:59 - AGCM4:72)
|
||||||
|
//#define BTN_EN2 55 // AUX2 PIN 4 (Mega/Due:63 - AGCM4:55)
|
||||||
|
//#define BTN_ENC EXP2_01_PIN // AUX3 PIN 7
|
||||||
|
#else
|
||||||
|
// TO TEST
|
||||||
|
//#define BTN_EN1 EXP1_05_PIN
|
||||||
|
//#define BTN_EN2 EXP1_08_PIN
|
||||||
|
//#define BTN_ENC 31
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if ENABLED(G3D_PANEL)
|
||||||
|
// TO TEST
|
||||||
|
//#define SD_DETECT_PIN EXP2_01_PIN
|
||||||
|
//#define KILL_PIN EXP1_10_PIN
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif
|
||||||
|
#endif // IS_NEWPANEL
|
||||||
|
|
||||||
|
#endif // HAS_WIRED_LCD
|
||||||
|
|
||||||
|
//
|
||||||
|
// SD Support
|
||||||
|
//
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Bricolemon has an SD slot, but to change it to your LCD or Custom, set the option to one of the following:
|
||||||
|
*
|
||||||
|
* LCD - Use the SD drive in the external LCD controller.
|
||||||
|
* ONBOARD - Use the SD drive on the control board.
|
||||||
|
* CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
|
||||||
|
*
|
||||||
|
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef SDCARD_CONNECTION
|
||||||
|
#define SDCARD_CONNECTION ONBOARD
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if SD_CONNECTION_IS(ONBOARD)
|
||||||
|
#define SDSS 83
|
||||||
|
#undef SD_DETECT_PIN
|
||||||
|
#define SD_DETECT_PIN 95
|
||||||
|
#else
|
||||||
|
#define SDSS EXP2_07_PIN
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if HAS_TMC_UART
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Address for the UART Configuration of the TMC2209. Override in Configuration files.
|
||||||
|
* To test TMC2209 Steppers enable TMC_DEBUG in Configuration_adv.h and test the M122 command with voltage on the steppers.
|
||||||
|
*/
|
||||||
|
#ifndef X_SLAVE_ADDRESS
|
||||||
|
#define X_SLAVE_ADDRESS 0b00
|
||||||
|
#endif
|
||||||
|
#ifndef Y_SLAVE_ADDRESS
|
||||||
|
#define Y_SLAVE_ADDRESS 0b01
|
||||||
|
#endif
|
||||||
|
#ifndef Z_SLAVE_ADDRESS
|
||||||
|
#define Z_SLAVE_ADDRESS 0b10
|
||||||
|
#endif
|
||||||
|
#ifndef E0_SLAVE_ADDRESS
|
||||||
|
#define E0_SLAVE_ADDRESS 0b11
|
||||||
|
#endif
|
||||||
|
#ifndef E1_SLAVE_ADDRESS
|
||||||
|
#define E1_SLAVE_ADDRESS 0b00
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/**
|
||||||
|
* TMC2208/TMC2209 stepper drivers
|
||||||
|
* It seems to work perfectly fine on Software Serial, if an advanced user wants to test, you could use the SAMD51 Serial1 and Serial 2. Be careful with the Sercom configurations.
|
||||||
|
* Steppers 1,2,3,4 (X,Y,Z,E0) are on the Serial1, Sercom (RX = 0, TX = 1), extra stepper 5 (E1 or any axis you want) is on Serial2, Sercom (RX = 17, TX = 16)
|
||||||
|
*/
|
||||||
|
|
||||||
|
//#define X_HARDWARE_SERIAL Serial1
|
||||||
|
//#define Y_HARDWARE_SERIAL Serial1
|
||||||
|
//#define Z_HARDWARE_SERIAL Serial1
|
||||||
|
//#define E0_HARDWARE_SERIAL Serial1
|
||||||
|
//#define E1_HARDWARE_SERIAL Serial2
|
||||||
|
|
||||||
|
#define TMC_BAUD_RATE 250000
|
||||||
|
|
||||||
|
//
|
||||||
|
// Software serial
|
||||||
|
//
|
||||||
|
#define X_SERIAL_TX_PIN 0
|
||||||
|
#define X_SERIAL_RX_PIN 1
|
||||||
|
|
||||||
|
#define Y_SERIAL_TX_PIN X_SERIAL_TX_PIN
|
||||||
|
#define Y_SERIAL_RX_PIN X_SERIAL_RX_PIN
|
||||||
|
|
||||||
|
#define Z_SERIAL_TX_PIN X_SERIAL_TX_PIN
|
||||||
|
#define Z_SERIAL_RX_PIN X_SERIAL_RX_PIN
|
||||||
|
|
||||||
|
#define E0_SERIAL_TX_PIN X_SERIAL_TX_PIN
|
||||||
|
#define E0_SERIAL_RX_PIN X_SERIAL_RX_PIN
|
||||||
|
|
||||||
|
#define E1_SERIAL_TX_PIN 17
|
||||||
|
#define E1_SERIAL_RX_PIN 16
|
||||||
|
|
||||||
|
#endif
|
||||||
Loading…
Reference in New Issue
Block a user