bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

No compromises for the manage_heater()

Browse Source 
No compromises for the manage_heater(). manage_heater() will return immediately when there is nothing to do, but needs a constant detaT to work proper.
Calling idle() only every 200ms results in a display update every ~2 seconds - that should be enough.
For the other functionalities in idle() and manage_inactivity() 200ms is a lot but hopefully works.
This commit is contained in:
AnHardt
2016-05-19 20:52:11 +02:00
parent 0c4d885d5b
commit 2207001333
3 changed files with 8 additions and 7 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
Marlin/Configuration_adv.h
View File

@@ -448,11 +448,11 @@
// @section extras
// Arc interpretation settings:
#define ARC_SUPPORT // Disabling this saves ~2660bytes
#define ARC_SUPPORT // Disabling this saves ~2738 bytes
#define MM_PER_ARC_SEGMENT 1
#define N_ARC_CORRECTION 25
// Support for G5 with XYZE destination and IJPQ offsets
// Support for G5 with XYZE destination and IJPQ offsets. Needs ~2666 bytes
//#define BEZIER_CURVE_SUPPORT
const unsigned int dropsegments = 5; //everything with less than this number of steps will be ignored as move and joined with the next movement

7
Marlin/Marlin_main.cpp
View File

@@ -7604,13 +7604,14 @@ void prepare_move() {
float feed_rate = feedrate * feedrate_multiplier / 60 / 100.0;
millis_t previous_ms = millis();
millis_t next_ping_ms = millis() + 200UL;
for (i = 1; i < segments; i++) { // Iterate (segments-1) times
thermalManager.manage_heater();
millis_t now = millis();
if (now - previous_ms > 200UL) {
previous_ms = now;
if (ELAPSED(now, next_ping_ms)) {
next_ping_ms = now + 200UL;
idle();
}

4
Marlin/planner_bezier.cpp
View File

@@ -118,15 +118,15 @@ void cubic_b_spline(const float position[NUM_AXIS], const float target[NUM_AXIS]
bez_target[Y_AXIS] = position[Y_AXIS];
float step = MAX_STEP;
uint8_t idle_counter = 0;
millis_t next_ping_ms = millis() + 200UL;
while (t < 1.0) {
thermalManager.manage_heater();
millis_t now = millis();
if (ELAPSED(now, next_ping_ms)) {
next_ping_ms = now + 200UL;
(idle_counter++ & 0x03) ? thermalManager.manage_heater() : idle();
idle();
}
// First try to reduce the step in order to make it sufficiently