merged with upstream and FIXED AGAIN bad translation commit

PLEASE BE MORE CAREFUL WHEN SUBMITTING NEW TRANSLATIONS

When you add new menu items / messages always copy them to ALL
languages (just use english)

Marlin/EEPROMwrite.h

@@ -6,7 +6,13 @@
 #include "temperature.h"
 //#include <EEPROM.h>
 
+int plaPreheatHotendTemp;
+int plaPreheatHPBTemp;
+int plaPreheatFanSpeed;
 
+int absPreheatHotendTemp;
+int absPreheatHPBTemp;
+int absPreheatFanSpeed;
 
 template <class T> int EEPROM_writeAnything(int &ee, const T& value)
 {
@@ -38,7 +44,7 @@ template <class T> int EEPROM_readAnything(int &ee, T& value)
 // the default values are used whenever there is a change to the data, to prevent
 // wrong data being written to the variables.
 // ALSO:  always make sure the variables in the Store and retrieve sections are in the same order.
-#define EEPROM_VERSION "V06"
+#define EEPROM_VERSION "V07"
 
 inline void EEPROM_StoreSettings() 
 {
@@ -58,6 +64,12 @@ inline void EEPROM_StoreSettings()
   EEPROM_writeAnything(i,max_z_jerk);
   EEPROM_writeAnything(i,max_e_jerk);
   EEPROM_writeAnything(i,add_homeing);
+  EEPROM_writeAnything(i,plaPreheatHotendTemp);
+  EEPROM_writeAnything(i,plaPreheatHPBTemp);
+  EEPROM_writeAnything(i,plaPreheatFanSpeed);
+  EEPROM_writeAnything(i,absPreheatHotendTemp);
+  EEPROM_writeAnything(i,absPreheatHPBTemp);
+  EEPROM_writeAnything(i,absPreheatFanSpeed);
   #ifdef PIDTEMP
     EEPROM_writeAnything(i,Kp);
     EEPROM_writeAnything(i,Ki);
@@ -162,6 +174,12 @@ inline void EEPROM_RetrieveSettings(bool def=false)
       EEPROM_readAnything(i,max_z_jerk);
       EEPROM_readAnything(i,max_e_jerk);
       EEPROM_readAnything(i,add_homeing);
+	  EEPROM_readAnything(i,plaPreheatHotendTemp);
+	  EEPROM_readAnything(i,plaPreheatHPBTemp);
+	  EEPROM_readAnything(i,plaPreheatFanSpeed);
+	  EEPROM_readAnything(i,absPreheatHotendTemp);
+	  EEPROM_readAnything(i,absPreheatHPBTemp);
+	  EEPROM_readAnything(i,absPreheatFanSpeed);
       #ifndef PIDTEMP
         float Kp,Ki,Kd;
       #endif
@@ -195,6 +213,14 @@ inline void EEPROM_RetrieveSettings(bool def=false)
       add_homeing[0] = add_homeing[1] = add_homeing[2] = 0;
       SERIAL_ECHO_START;
       SERIAL_ECHOLN("Using Default settings:");
+#ifdef ULTIPANEL
+	  plaPreheatHotendTemp = PLA_PREHEAT_HOTEND_TEMP;
+	  plaPreheatHPBTemp = PLA_PREHEAT_HPB_TEMP;
+	  plaPreheatFanSpeed = PLA_PREHEAT_FAN_SPEED;
+	  absPreheatHotendTemp = ABS_PREHEAT_HOTEND_TEMP;
+	  absPreheatHPBTemp = ABS_PREHEAT_HPB_TEMP;
+	  absPreheatFanSpeed = ABS_PREHEAT_FAN_SPEED;
+#endif
     }
   #ifdef EEPROM_CHITCHAT
     EEPROM_printSettings();

Marlin/language.h

@@ -40,6 +40,10 @@
 	#define MSG_DISABLE_STEPPERS " Disable Steppers"
 	#define MSG_AUTO_HOME " Auto Home"
 	#define MSG_SET_ORIGIN " Set Origin"
+	#define MSG_PREHEAT_PLA " Preheat PLA"
+	#define MSG_PREHEAT_PLA_SETTINGS " Preheat PLA Setting"
+	#define MSG_PREHEAT_ABS " Preheat ABS"
+	#define MSG_PREHEAT_ABS_SETTINGS " Preheat ABS Setting"
 	#define MSG_COOLDOWN " Cooldown"
 	#define MSG_EXTRUDE " Extrude"
 	#define MSG_RETRACT " Retract"
@@ -82,6 +86,7 @@
 	#define MSG_MAIN_WIDE " Main        \003"
 	#define MSG_RECTRACT_WIDE " Rectract    \x7E"
 	#define MSG_TEMPERATURE_WIDE " Temperature \x7E"
+	#define MSG_TEMPERATURE_RTN " Temperature  \003"
 	#define MSG_MOTION_WIDE " Motion      \x7E"
 	#define MSG_STORE_EPROM " Store memory"
 	#define MSG_LOAD_EPROM " Load memory"
@@ -194,7 +199,9 @@
 	#define MSG_AUTO_HOME        " Auto Nullpunkt"
 	#define MSG_SET_ORIGIN       " Setze Nullpunkt"
 	#define MSG_PREHEAT_PLA      " Vorwärmen PLA"
+	#define MSG_PREHEAT_PLA_SETTINGS " Vorwärmen PLA Einstellungen"
 	#define MSG_PREHEAT_ABS      " Vorwärmen ABS"
+	#define MSG_PREHEAT_ABS_SETTINGS "  Vorwärmen ABS Einstellungen"
 	#define MSG_COOLDOWN         " Abkühlen"
 	#define MSG_EXTRUDE          " Extrude"
 	#define MSG_RETRACT          " Retract"
@@ -236,6 +243,7 @@
 	#define MSG_RECTRACT_WIDE    " Rectract      \x7E"
 	#define MSG_WATCH            " Beobachten    \003"
 	#define MSG_TEMPERATURE_WIDE " Temperatur    \x7E"
+        #define MSG_TEMPERATURE_RTN  " Temperatur    \003"
 	#define MSG_MOTION_WIDE      " Bewegung      \x7E"
 	#define MSG_STORE_EPROM      " EPROM speichern"
 	#define MSG_LOAD_EPROM       " EPROM laden"
@@ -348,7 +356,9 @@
 #define MSG_EXTRUDE " Extruir"
 #define MSG_RETRACT " Retract"
 #define MSG_PREHEAT_PLA " Precalentar PLA"
+#define MSG_PREHEAT_PLA_SETTINGS " Precalentar PLA Setting"
 #define MSG_PREHEAT_ABS " Precalentar ABS"
+#define MSG_PREHEAT_ABS_SETTINGS " Precalentar ABS Setting"
 #define MSG_MOVE_AXIS " Mover Ejes      \x7E"
 #define MSG_SPEED " Velocidad:"
 #define MSG_NOZZLE " \002Nozzle:"
@@ -386,6 +396,7 @@
 #define MSG_MAIN_WIDE " Menu Principal  \003"
 #define MSG_RECTRACT_WIDE " Retraer         \x7E"
 #define MSG_TEMPERATURE_WIDE " Temperatura     \x7E"
+#define MSG_TEMPERATURE_RTN  " Temperatura     \003"
 #define MSG_MOTION_WIDE " Movimiento      \x7E"
 #define MSG_STORE_EPROM " Guardar Memoria"
 #define MSG_LOAD_EPROM " Cargar Memoria"
@@ -402,15 +413,12 @@
 #define MSG_STOP_PRINT " Detener Impresion \x7E"
 #define MSG_CARD_MENU " Menu de SD    \x7E"
 #define MSG_NO_CARD " No hay Tarjeta SD"
-#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Hay un error en la estructura del menu"
 #define MSG_DWELL "Reposo..."
 #define MSG_USERWAIT "Esperando Ordenes..."
 #define MSG_NO_MOVE "Sin movimiento"
 #define MSG_PART_RELEASE "Desacople Parcial"
 #define MSG_KILLED "PARADA DE EMERGENCIA. "
 #define MSG_STOPPED "PARADA. "
-#define MSG_PREHEAT_PLA " Precalentar PLA"
-#define MSG_PREHEAT_ABS " Precalentar ABS"
 #define MSG_STEPPER_RELEASED "Desacoplada."
 #define MSG_CONTROL_RETRACT  " Retraer mm:"
 #define MSG_CONTROL_RETRACTF " Retraer  F:"
@@ -418,6 +426,7 @@
 #define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:"
 #define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:"
 #define MSG_AUTORETRACT " AutoRetr.:"
+#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Hay un error en la estructura del menu"
 
 // Serial Console Messages
 

Marlin/ultralcd.h

@@ -47,11 +47,13 @@
     
   #endif
 
+
+    
   // blocking time for recognizing a new keypress of one key, ms
   #define blocktime 500
   #define lcdslow 5
     
-  enum MainStatus{Main_Status, Main_Menu, Main_Prepare,Sub_PrepareMove, Main_Control, Main_SD,Sub_TempControl,Sub_MotionControl,Sub_RetractControl};
+  enum MainStatus{Main_Status, Main_Menu, Main_Prepare,Sub_PrepareMove, Main_Control, Main_SD,Sub_TempControl,Sub_MotionControl,Sub_RetractControl, Sub_PreheatPLASettings, Sub_PreheatABSSettings};
 
   class MainMenu{
   public:
@@ -71,6 +73,8 @@
     void showControlRetract();
     void showAxisMove();
     void showSD();
+	void showPLAsettings();
+	void showABSsettings();
     bool force_lcd_update;
     long lastencoderpos;
     int8_t lineoffset;

Marlin/ultralcd.pde

@@ -534,17 +534,17 @@ void MainMenu::showPrepare()
       MENUITEM(  lcdprintPGM(MSG_SET_ORIGIN)  ,  BLOCK;enquecommand("G92 X0 Y0 Z0");beepshort(); ) ;
       break;
     case ItemP_preheat_pla:
-      MENUITEM(  lcdprintPGM(MSG_PREHEAT_PLA)  ,  BLOCK;setTargetHotend0(PLA_PREHEAT_HOTEND_TEMP);setTargetBed(PLA_PREHEAT_HPB_TEMP);
+		MENUITEM(  lcdprintPGM(MSG_PREHEAT_PLA)  ,  BLOCK;setTargetHotend0(plaPreheatHotendTemp);setTargetBed(plaPreheatHPBTemp);
       #if FAN_PIN > -1
-		FanSpeed=PLA_PREHEAT_FAN_SPEED;
+		FanSpeed = plaPreheatFanSpeed;
         analogWrite(FAN_PIN,  FanSpeed);
       #endif
       beepshort(); );
       break;
     case ItemP_preheat_abs:
-      MENUITEM(  lcdprintPGM(MSG_PREHEAT_ABS)  ,  BLOCK;setTargetHotend0(ABS_PREHEAT_HOTEND_TEMP);setTargetBed(ABS_PREHEAT_HPB_TEMP); 
+      MENUITEM(  lcdprintPGM(MSG_PREHEAT_ABS)  ,  BLOCK;setTargetHotend0(absPreheatHotendTemp);setTargetBed(absPreheatHPBTemp); 
       #if FAN_PIN > -1
-	  	FanSpeed=ABS_PREHEAT_FAN_SPEED;
+	  	FanSpeed = absPreheatFanSpeed;
         analogWrite(FAN_PIN,  FanSpeed);
       #endif
       beepshort(); );
@@ -973,7 +973,9 @@ enum {
 ItemCT_bed,
 #endif  
   ItemCT_fan,
-  ItemCT_PID_P,ItemCT_PID_I,ItemCT_PID_D,ItemCT_PID_C
+  ItemCT_PID_P,ItemCT_PID_I,ItemCT_PID_D,ItemCT_PID_C,
+  ItemCT_PLA_PreHeat_Setting, 
+  ItemCT_ABS_PreHeat_Setting,
 };
 
 void MainMenu::showControlTemp()
@@ -1440,16 +1442,19 @@ void MainMenu::showControlTemp()
       #endif
     #endif
       break;
+	  case ItemCT_PLA_PreHeat_Setting:
+        MENUITEM(  lcdprintPGM(MSG_PREHEAT_PLA_SETTINGS)  ,  BLOCK;status=Sub_PreheatPLASettings;beepshort(); ) ;
+	  break;
+	  case ItemCT_ABS_PreHeat_Setting:
+        MENUITEM(  lcdprintPGM(MSG_PREHEAT_ABS_SETTINGS)  ,  BLOCK;status=Sub_PreheatABSSettings;beepshort(); ) ;
+	  break;
     default:   
       break;
   }
   line++;
  }
- #ifdef PID_ADD_EXTRUSION_RATE
+
-  updateActiveLines(ItemCT_PID_C,encoderpos);
+  updateActiveLines(ItemCT_ABS_PreHeat_Setting,encoderpos);
- #else
-  updateActiveLines(ItemCT_PID_D,encoderpos);
- #endif
 }
 
 
@@ -2575,6 +2580,14 @@ void MainMenu::update()
       {
         showSD();
       }break;
+	  case Sub_PreheatPLASettings: 
+      {
+        showPLAsettings();
+      }break;
+	  case Sub_PreheatABSSettings: 
+      {
+        showABSsettings();
+      }break;
   }
   
   if(timeoutToStatus<millis())
@@ -2583,11 +2596,299 @@ void MainMenu::update()
   lastencoderpos=encoderpos;
 }
 
+enum {
+	ItemPLAPreHeat_Exit, 
+	ItemPLAPreHeat_set_PLA_FanSpeed, 
+	ItemPLAPreHeat_set_nozzle, 
+	ItemPLAPreHeat_set_HPB,
+	ItemPLAPreHeat_Store_Eprom
+	};
   
+void MainMenu::showPLAsettings()
+{
+#ifdef ULTIPANEL
+ uint8_t line=0;
+ clearIfNecessary();
+ for(int8_t i=lineoffset;i<lineoffset+LCD_HEIGHT;i++)
+ {
+  switch(i)
+  {
 
+	case ItemPLAPreHeat_Exit:
+      MENUITEM(  lcdprintPGM(MSG_TEMPERATURE_RTN)  ,  BLOCK;status=Sub_TempControl;beepshort(); ) ;
+      break;
 
+    case ItemPLAPreHeat_set_PLA_FanSpeed:
+       {
+        if(force_lcd_update)
+        {
+          lcd.setCursor(0,line);lcdprintPGM(MSG_FAN_SPEED);
+          lcd.setCursor(13,line);lcd.print(ftostr3(plaPreheatFanSpeed));
+        }
         
+        if((activeline!=line) )
+          break;
         
+        if(CLICKED) 
+        {
+          linechanging=!linechanging;
+          if(linechanging)
+          {
+			  encoderpos=plaPreheatFanSpeed;
+          }
+          else
+          {
+            encoderpos=activeline*lcdslow;
+            beepshort();
+          }
+          BLOCK;
+        }
+        if(linechanging)
+        {
+          if(encoderpos<0) encoderpos=0;
+          if(encoderpos>255) encoderpos=255;
+          plaPreheatFanSpeed=encoderpos;
+          lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));
+        }
+      }break;
+
+    case ItemPLAPreHeat_set_nozzle:
+      {
+        if(force_lcd_update)
+        {
+          lcd.setCursor(0,line);lcdprintPGM(MSG_NOZZLE);
+          lcd.setCursor(13,line);lcd.print(ftostr3(plaPreheatHotendTemp));
+        } 
+        
+        if((activeline!=line) )
+          break;
+        
+        if(CLICKED)
+        {
+          linechanging=!linechanging;
+          if(linechanging)
+          {
+              encoderpos=plaPreheatHotendTemp;
+          }
+          else
+          {
+            encoderpos=activeline*lcdslow;
+            beepshort();
+          }
+          BLOCK;
+        }
+        if(linechanging)
+        {
+          if(encoderpos<0) encoderpos=0;
+          if(encoderpos>260) encoderpos=260;
+		  plaPreheatHotendTemp = encoderpos;
+          lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));
+        }
+      }break;
+
+    case ItemPLAPreHeat_set_HPB:
+      {
+        if(force_lcd_update)
+        {
+          lcd.setCursor(0,line);lcdprintPGM(MSG_BED);
+          lcd.setCursor(13,line);lcd.print(ftostr3(plaPreheatHPBTemp));
+        } 
+        
+        if((activeline!=line) )
+          break;
+        
+        if(CLICKED)
+        {
+          linechanging=!linechanging;
+          if(linechanging)
+          {
+              encoderpos=plaPreheatHPBTemp;
+          }
+          else
+          {
+            encoderpos=activeline*lcdslow;
+            beepshort();
+          }
+          BLOCK;
+        }
+        if(linechanging)
+        {
+          if(encoderpos<0) encoderpos=0;
+          if(encoderpos>250) encoderpos=150;
+		  plaPreheatHPBTemp = encoderpos;
+          lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));
+        }
+      }break;
+	case ItemPLAPreHeat_Store_Eprom:
+    {
+      if(force_lcd_update)
+      {
+        lcd.setCursor(0,line);lcdprintPGM(MSG_STORE_EPROM);
+      }
+      if((activeline==line) && CLICKED)
+      {
+        //enquecommand("M84");
+        beepshort();
+        BLOCK;
+        EEPROM_StoreSettings();
+      }
+    }break;
+      default:   
+      break;
+  }
+  line++;
+ }
+ updateActiveLines(ItemPLAPreHeat_Store_Eprom,encoderpos);
+#endif
+}
+
+enum {
+	ItemABSPreHeat_Exit, 
+	ItemABSPreHeat_set_FanSpeed, 
+	ItemABSPreHeat_set_nozzle, 
+	ItemABSPreHeat_set_HPB,
+	ItemABSPreHeat_Store_Eprom
+	};
+
+void MainMenu::showABSsettings()
+{
+#ifdef ULTIPANEL
+ uint8_t line=0;
+ clearIfNecessary();
+ for(int8_t i=lineoffset;i<lineoffset+LCD_HEIGHT;i++)
+ {
+  switch(i)
+  {
+
+	case ItemABSPreHeat_Exit:
+      MENUITEM(  lcdprintPGM(MSG_TEMPERATURE_RTN)  ,  BLOCK;status=Sub_TempControl;beepshort(); ) ;
+      break;
+
+    case ItemABSPreHeat_set_FanSpeed:
+       {
+        if(force_lcd_update)
+        {
+          lcd.setCursor(0,line);lcdprintPGM(MSG_FAN_SPEED);
+          lcd.setCursor(13,line);lcd.print(ftostr3(absPreheatFanSpeed));
+        }
+        
+        if((activeline!=line) )
+          break;
+        
+        if(CLICKED) 
+        {
+          linechanging=!linechanging;
+          if(linechanging)
+          {
+			  encoderpos=absPreheatFanSpeed;
+          }
+          else
+          {
+            encoderpos=activeline*lcdslow;
+            beepshort();
+          }
+          BLOCK;
+        }
+        if(linechanging)
+        {
+          if(encoderpos<0) encoderpos=0;
+          if(encoderpos>255) encoderpos=255;
+          absPreheatFanSpeed=encoderpos;
+          lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));
+        }
+      }break;
+
+    case ItemABSPreHeat_set_nozzle:
+      {
+        if(force_lcd_update)
+        {
+          lcd.setCursor(0,line);lcdprintPGM(MSG_NOZZLE);
+          lcd.setCursor(13,line);lcd.print(ftostr3(absPreheatHotendTemp));
+        } 
+        
+        if((activeline!=line) )
+          break;
+        
+        if(CLICKED)
+        {
+          linechanging=!linechanging;
+          if(linechanging)
+          {
+              encoderpos=absPreheatHotendTemp;
+          }
+          else
+          {
+            encoderpos=activeline*lcdslow;
+            beepshort();
+          }
+          BLOCK;
+        }
+        if(linechanging)
+        {
+          if(encoderpos<0) encoderpos=0;
+          if(encoderpos>260) encoderpos=260;
+		  absPreheatHotendTemp = encoderpos;
+          lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));
+        }
+      }break;
+
+    case ItemABSPreHeat_set_HPB:
+      {
+        if(force_lcd_update)
+        {
+          lcd.setCursor(0,line);lcdprintPGM(MSG_BED);
+          lcd.setCursor(13,line);lcd.print(ftostr3(absPreheatHPBTemp));
+        } 
+        
+        if((activeline!=line) )
+          break;
+        
+        if(CLICKED)
+        {
+          linechanging=!linechanging;
+          if(linechanging)
+          {
+              encoderpos=absPreheatHPBTemp;
+          }
+          else
+          {
+            encoderpos=activeline*lcdslow;
+            beepshort();
+          }
+          BLOCK;
+        }
+        if(linechanging)
+        {
+          if(encoderpos<0) encoderpos=0;
+          if(encoderpos>250) encoderpos=150;
+		  absPreheatHPBTemp = encoderpos;
+          lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));
+        }
+      }break;
+	case ItemABSPreHeat_Store_Eprom:
+    {
+      if(force_lcd_update)
+      {
+        lcd.setCursor(0,line);lcdprintPGM(MSG_STORE_EPROM);
+      }
+      if((activeline==line) && CLICKED)
+      {
+        //enquecommand("M84");
+        beepshort();
+        BLOCK;
+        EEPROM_StoreSettings();
+      }
+    }break;
+      default:   
+      break;
+  }
+  line++;
+ }
+ updateActiveLines(ItemABSPreHeat_Store_Eprom,encoderpos);
+#endif
+}
+
+//**********************************************************************************************************
 //  convert float to string with +123.4 format
 char *ftostr3(const float &x)
 {