Local testing via Makefile & Docker (#19981)

This commit is contained in:
Costas Basdekis 2020-11-18 02:04:28 +00:00 committed by GitHub
parent 26ac992242
commit 1cceae89cd
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
59 changed files with 418 additions and 226 deletions

View File

@ -119,8 +119,4 @@ jobs:
- name: Run ${{ matrix.test-platform }} Tests - name: Run ${{ matrix.test-platform }} Tests
run: | run: |
# Inline tests script make tests-single-ci TEST_TARGET=${{ matrix.test-platform }}
chmod +x buildroot/bin/*
chmod +x buildroot/tests/*
export PATH=./buildroot/bin/:./buildroot/tests/:${PATH}
run_tests . ${{ matrix.test-platform }}

56
Makefile Normal file
View File

@ -0,0 +1,56 @@
help:
@echo "Tasks for local development:"
@echo "* tests-single-ci: Run a single test from inside the CI"
@echo "* tests-single-local: Run a single test locally"
@echo "* tests-single-local-docker: Run a single test locally, using docker-compose"
@echo "* tests-all-local: Run all tests locally"
@echo "* tests-all-local-docker: Run all tests locally, using docker-compose"
@echo "* setup-local-docker: Setup local docker-compose"
@echo ""
@echo "Options for testing:"
@echo " TEST_TARGET Set when running tests-single-*, to select the"
@echo " test. If you set it to ALL it will run all "
@echo " tests, but some of them are broken: use "
@echo " tests-all-* instead to run only the ones that "
@echo " run on GitHub CI"
@echo " ONLY_TEST Limit tests to only those that contain this, or"
@echo " the index of the test (1-based)"
@echo " VERBOSE_PLATFORMIO If you want the full PIO output, set any value"
@echo " GIT_RESET_HARD Used by CI: reset all local changes. WARNING:"
@echo " THIS WILL UNDO ANY CHANGES YOU'VE MADE!"
.PHONY: help
tests-single-ci:
export GIT_RESET_HARD=true
$(MAKE) tests-single-local TEST_TARGET=$(TEST_TARGET)
.PHONY: tests-single-ci
tests-single-local:
@if ! test -n "$(TEST_TARGET)" ; then echo "***ERROR*** Set TEST_TARGET=<your-module> or use make tests-all-local" ; return 1; fi
chmod +x buildroot/bin/*
chmod +x buildroot/tests/*
export PATH=./buildroot/bin/:./buildroot/tests/:${PATH} \
&& export VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) \
&& run_tests . $(TEST_TARGET) "$(ONLY_TEST)"
.PHONY: tests-single-local
tests-single-local-docker:
@if ! test -n "$(TEST_TARGET)" ; then echo "***ERROR*** Set TEST_TARGET=<your-module> or use make tests-all-local-docker" ; return 1; fi
docker-compose run --rm marlin $(MAKE) tests-single-local TEST_TARGET=$(TEST_TARGET) VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) GIT_RESET_HARD=$(GIT_RESET_HARD) ONLY_TEST="$(ONLY_TEST)"
.PHONY: tests-single-local-docker
tests-all-local:
chmod +x buildroot/bin/*
chmod +x buildroot/tests/*
export PATH=./buildroot/bin/:./buildroot/tests/:${PATH} \
&& export VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) \
&& for TEST_TARGET in $$(./get_test_targets.py) ; do echo "Running tests for $$TEST_TARGET" ; run_tests . $$TEST_TARGET ; done
.PHONY: tests-all-local
tests-all-local-docker:
docker-compose run --rm marlin $(MAKE) tests-all-local VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) GIT_RESET_HARD=$(GIT_RESET_HARD)
.PHONY: tests-all-local-docker
setup-local-docker:
docker-compose build
.PHONY: setup-local-docker

View File

@ -110,6 +110,11 @@ Proposed patches should be submitted as a Pull Request against the ([bugfix-2.0.
- This branch is for fixing bugs and integrating any new features for the duration of the Marlin 2.0.x life-cycle. - This branch is for fixing bugs and integrating any new features for the duration of the Marlin 2.0.x life-cycle.
- Follow the [Coding Standards](https://marlinfw.org/docs/development/coding_standards.html) to gain points with the maintainers. - Follow the [Coding Standards](https://marlinfw.org/docs/development/coding_standards.html) to gain points with the maintainers.
- Please submit Feature Requests and Bug Reports to the [Issue Queue](https://github.com/MarlinFirmware/Marlin/issues/new/choose). Support resources are also listed there. - Please submit Feature Requests and Bug Reports to the [Issue Queue](https://github.com/MarlinFirmware/Marlin/issues/new/choose). Support resources are also listed there.
- Whenever you add new features, be sure to add tests to `buildroot/tests` and then run your tests locally, if possible.
- It's optional: Running all the tests on Windows might take a long time, and they will run anyway on GitHub.
- If you're running the tests on Linux (or on WSL with the code on a Linux volume) the speed is much faster.
- You can use `make tests-all-local` or `make tests-single-local TEST_TARGET=...`.
- If you prefer Docker you can use `make tests-all-local-docker` or `make tests-all-local-docker TEST_TARGET=...`.
### [RepRap.org Wiki Page](https://reprap.org/wiki/Marlin) ### [RepRap.org Wiki Page](https://reprap.org/wiki/Marlin)

View File

@ -7,7 +7,33 @@
# #
MFINFO=$(mfinfo) || exit 1 MFINFO=$(mfinfo) || exit 1
[[ -d Marlin/src ]] || { echo "Please 'cd' up to repo root." ; exit 1 ; } [[ -d Marlin/src ]] || { echo "Please 'cd' to the Marlin repo root." ; exit 1 ; }
perror() { echo -e "$0: \033[0;31m$1 -- $2\033[0m" ; }
errout() { echo -e "\033[0;31m$1\033[0m" ; }
bugout() { ((DEBUG)) && echo -e "\033[0;32m$1\033[0m" ; }
usage() {
echo "
Usage: mftest [-t|--env=<env>] [-n|--num=<num>] [-m|--make] [-y|--build=<Y|n>]
mftest [-a|--autobuild]
mftest [-r|--rebuild]
mftest [-u|--autoupload] [-n|--num=<num>]
OPTIONS
-t --env The environment of the test to apply / run. (As named in platformio.ini.)
-n --num The index of the test to run. (In *-tests file order.)
-m --make Use the make / Docker method for the build.
-y --build Skip 'Do you want to build this test?' and assume YES.
-h --help Print this help.
-a --autobuild PIO Build using the MOTHERBOARD environment.
-u --autoupload PIO Upload using the MOTHERBOARD environment.
-v --verbose Extra output for debugging.
env shortcuts: tree due esp lin lpc|lpc8 lpc9 m128 m256|mega stm|f1 f4 f7 s6 teensy|t31|t32 t35|t36 t40|t41
"
}
TESTPATH=buildroot/tests TESTPATH=buildroot/tests
@ -22,12 +48,68 @@ ISCMD='^(restore|opt|exec|use|pins|env)_'
ISEXEC='^exec_' ISEXEC='^exec_'
ISCONT='\\ *$' ISCONT='\\ *$'
# Get the environment and test number from the command # Get environment, test number, etc. from the command
TESTENV=${1:-'-'} TESTENV='-'
CHOICE=${2:-0} CHOICE=0
AUTOENV=0 DEBUG=0
while getopts 'abhmruvyn:t:-:' OFLAG; do
case "${OFLAG}" in
a) AUTO_BUILD=1 ; bugout "Auto-Build target..." ;;
h) EXIT_USAGE=1 ;;
m) USE_MAKE=1 ; bugout "Using make with Docker..." ;;
n) case "$OPTARG" in
*[!0-9]*) perror "option requires a number" $OFLAG ; EXIT_USAGE=1 ;;
*) CHOICE="$OPTARG" ; bugout "Got a number: $CHOICE" ;;
esac
;;
r) REBUILD=1 ; bugout "Rebuilding previous..." ;;
t) TESTENV="$OPTARG" ; bugout "Got a target: $TESTENV" ;;
u) AUTO_BUILD=2 ; bugout "Auto-Upload target..." ;;
v) DEBUG=1 ; bugout "Debug ON" ;;
y) BUILD_YES='Y' ; bugout "Build will initiate..." ;;
-) IFS="=" read -r ONAM OVAL <<< "$OPTARG"
case "$ONAM" in
help) [[ -z "$OVAL" ]] || perror "option can't take value $OVAL" $ONAM ; EXIT_USAGE=1 ;;
autobuild) AUTO_BUILD=1 ; bugout "Auto-Build target..." ;;
autoupload) AUTO_BUILD=2 ; bugout "Auto-Upload target..." ;;
env) case "$OVAL" in
'') perror "option requires a value" $ONAM ; EXIT_USAGE=1 ;;
*) TESTENV="$OVAL" ; bugout "Got a target: $TESTENV" ;;
esac
;;
num) case "$OVAL" in
[0-9]+) CHOICE="$OVAL" ; bugout "Got a number: $CHOICE" ;;
*) perror "option requires a value" $ONAM ; EXIT_USAGE=1 ;;
esac
;;
rebuild) REBUILD=1 ; bugout "Rebuilding previous..." ;;
make) USE_MAKE=1 ; bugout "Using make with Docker..." ;;
debug|verbose) DEBUG=1 ; bugout "Debug ON" ;;
build) case "$OVAL" in
''|y|yes) BUILD_YES='Y' ;;
n|no) BUILD_YES='N' ;;
*) perror "option value must be y, n, yes, or no" $ONAM ; EXIT_USAGE=1 ;;
esac
bugout "Build will initiate? ($BUILD_YES)"
;;
*) perror "Unknown flag" "$OPTARG" ; EXIT_USAGE=1 ;;
esac
;;
esac
done
((EXIT_USAGE)) && { usage ; exit 1 ; }
if ((REBUILD)); then
bugout "Rebuilding previous..."
# Build with the last-built env
[[ -f "$STATE_FILE" ]] || { errout "No previous (-r) build state found." ; exit 1 ; }
read TESTENV <"$STATE_FILE"
pio run -d . -e $TESTENV
exit
fi
# Allow shorthand for test name
case $TESTENV in case $TESTENV in
tree) pio run -d . -e include_tree ; exit 1 ;; tree) pio run -d . -e include_tree ; exit 1 ;;
due) TESTENV='DUE' ;; due) TESTENV='DUE' ;;
@ -50,42 +132,28 @@ case $TESTENV in
t36) TESTENV='teensy35' ;; t36) TESTENV='teensy35' ;;
t40) TESTENV='teensy41' ;; t40) TESTENV='teensy41' ;;
t41) TESTENV='teensy41' ;; t41) TESTENV='teensy41' ;;
esac
-h|--help) echo -e "$(basename $0) : Marlin Firmware test, build, and upload\n" if ((AUTO_BUILD)); then
echo "Usage: $(basename $0) ................. Select env and test to apply / run" #
echo " $(basename $0) [-y] env ........ Select a test for env to apply / run" # List environments that apply to the current MOTHERBOARD.
echo " $(basename $0) [-y] env test ... Apply / run the specified env test" #
echo " $(basename $0) -b [variant] .... Auto-build the specified variant" echo ; echo -n "Auto " ; ((AUTO_BUILD == 2)) && echo "Upload..." || echo "Build..."
echo " $(basename $0) -u [variant] .... Auto-build and upload the specified variant" MB=$( grep -E "^\s*#define MOTHERBOARD" Marlin/Configuration.h | awk '{ print $3 }' | $SED 's/BOARD_//' )
echo
echo "env shortcuts: tree due esp lin lpc|lpc8 lpc9 m128 m256|mega stm|f1 f4 f7 s6 teensy|t31|t32 t35|t36 t40|t41"
exit
;;
# Build with the last-built env
-r) [[ -f "$STATE_FILE" ]] || { echo "No previous (-r) build state found." ; exit 1 ; }
read TESTENV <"$STATE_FILE"
pio run -d . -e $TESTENV
exit
;;
-[bu]) MB=$( grep -E "^\s*#define MOTHERBOARD" Marlin/Configuration.h | awk '{ print $3 }' | $SED 's/BOARD_//' )
[[ -z $MB ]] && { echo "Error - Can't read MOTHERBOARD setting." ; exit 1 ; } [[ -z $MB ]] && { echo "Error - Can't read MOTHERBOARD setting." ; exit 1 ; }
BLINE=$( grep -E "define\s+BOARD_$MB\b" Marlin/src/core/boards.h ) BLINE=$( grep -E "define\s+BOARD_$MB\b" Marlin/src/core/boards.h )
BNUM=$( $SED -E 's/^.+BOARD_[^ ]+ +([0-9]+).+$/\1/' <<<"$BLINE" ) BNUM=$( $SED -E 's/^.+BOARD_[^ ]+ +([0-9]+).+$/\1/' <<<"$BLINE" )
BDESC=$( $SED -E 's/^.+\/\/ *(.+)$/\1/' <<<"$BLINE" ) BDESC=$( $SED -E 's/^.+\/\/ *(.+)$/\1/' <<<"$BLINE" )
[[ -z $BNUM ]] && { echo "Error - Can't find $MB in boards list." ; exit 1 ; } [[ -z $BNUM ]] && { echo "Error - Can't find $MB in boards list." ; exit 1 ; }
readarray -t ENVS <<< $( grep -EA1 "MB\(.*\b$MB\b.*\)" Marlin/src/pins/pins.h | grep -E '#include.+//.+env:.+' | grep -oE 'env:[^ ]+' | $SED -E 's/env://' ) ENVS=( $( grep -EA1 "MB\(.*\b$MB\b.*\)" Marlin/src/pins/pins.h | grep -E '#include.+//.+env:[^ ]+' | grep -oE 'env:[^ ]+' | $SED -E 's/env://' ) )
[[ -z $ENVS ]] && { echo "Error - Can't find target(s) for $MB ($BNUM)." ; exit 1 ; } [[ -z $ENVS ]] && { errout "Error - Can't find target(s) for $MB ($BNUM)." ; exit 1 ; }
ECOUNT=${#ENVS[*]} ECOUNT=${#ENVS[*]}
if [[ $ECOUNT == 1 ]]; then if [[ $ECOUNT == 1 ]]; then
TARGET=$ENVS TARGET=$ENVS
else else
if [[ $CHOICE == 0 ]]; then if [[ $CHOICE == 0 ]]; then
#
# List env names and numbers. Get selection. # List env names and numbers. Get selection.
#
echo "Available targets for \"$BDESC\" | $MB ($BNUM):" echo "Available targets for \"$BDESC\" | $MB ($BNUM):"
IND=0 ; for ENV in "${ENVS[@]}"; do let IND++ ; echo " $IND) $ENV" ; done IND=0 ; for ENV in "${ENVS[@]}"; do let IND++ ; echo " $IND) $ENV" ; done
@ -96,7 +164,7 @@ case $TESTENV in
read -p "Select a target for '$MB' (1-$ECOUNT) : " CHOICE read -p "Select a target for '$MB' (1-$ECOUNT) : " CHOICE
[[ -z "$CHOICE" ]] && { echo '(canceled)' ; exit 1 ; } [[ -z "$CHOICE" ]] && { echo '(canceled)' ; exit 1 ; }
[[ $CHOICE =~ $ISNUM ]] && ((CHOICE >= 1 && CHOICE <= ECOUNT)) && break [[ $CHOICE =~ $ISNUM ]] && ((CHOICE >= 1 && CHOICE <= ECOUNT)) && break
echo ">>> Invalid environment choice '$CHOICE'." errout ">>> Invalid environment choice '$CHOICE'."
done done
echo echo
fi fi
@ -110,22 +178,15 @@ case $TESTENV in
echo "$TARGET" >"$STATE_FILE" echo "$TARGET" >"$STATE_FILE"
if [[ $TESTENV == "-u" ]]; then if ((AUTO_BUILD == 2)); then
echo "Build/Uploading environment $TARGET for board $MB ($BNUM)..." ; echo echo "Uploading environment $TARGET for board $MB ($BNUM)..." ; echo
pio run -t upload -e $TARGET pio run -t upload -e $TARGET
else else
echo "Building environment $TARGET for board $MB ($BNUM)..." ; echo echo "Building environment $TARGET for board $MB ($BNUM)..." ; echo
pio run -e $TARGET pio run -e $TARGET
fi fi
exit exit
;; fi
# The -y flag may come first
-y) TESTENV=${2:-'-'} ; CHOICE=${3:-0} ;;
-[a-z]) echo "Unknown flag $TESTENV" ; exit 1 ;;
-) ;;
esac
# #
# List available tests and ask for selection # List available tests and ask for selection
@ -148,20 +209,20 @@ if [[ $TESTENV == '-' ]]; then
for (( ; ; )) for (( ; ; ))
do do
read -p "Select a test to apply (1-$IND) : " NAMEIND read -p "Select a test to apply (1-$IND) : " NAMEIND
[[ -z "$NAMEIND" ]] && { echo '(canceled)' ; exit 1 ; } [[ -z "$NAMEIND" ]] && { errout "(canceled)" ; exit 1 ; }
[[ $NAMEIND =~ $ISNUM ]] && ((NAMEIND >= 1 && NAMEIND <= IND)) && { TESTENV=${NAMES[$NAMEIND-1]} ; echo ; break ; } [[ $NAMEIND =~ $ISNUM ]] && ((NAMEIND >= 1 && NAMEIND <= IND)) && { TESTENV=${NAMES[$NAMEIND-1]} ; echo ; break ; }
echo "Invalid selection." errout "Invalid selection."
done done
fi fi
# Get the contents of the test file # Get the contents of the test file
OUT=$( cat $TESTPATH/$TESTENV-tests 2>/dev/null ) || { echo "Can't find test '$TESTENV'." ; exit 1 ; } OUT=$( cat $TESTPATH/$TESTENV-tests 2>/dev/null ) || { errout "Can't find test '$TESTENV'." ; exit 1 ; }
# Count up the number of tests # Count up the number of tests
TESTCOUNT=$( awk "/$ISEXEC/{a++}END{print a}" <<<"$OUT" ) TESTCOUNT=$( awk "/$ISEXEC/{a++}END{print a}" <<<"$OUT" )
# User entered a number? # User entered a number?
(( CHOICE && CHOICE > TESTCOUNT )) && { echo "Invalid test selection '$CHOICE' (1-$TESTCOUNT)." ; exit 1 ; } (( CHOICE && CHOICE > TESTCOUNT )) && { errout "Invalid test selection '$CHOICE' (1-$TESTCOUNT)." ; exit 1 ; }
if [[ $CHOICE == 0 ]]; then if [[ $CHOICE == 0 ]]; then
# #
@ -172,7 +233,7 @@ if [[ $CHOICE == 0 ]]; then
while IFS= read -r LINE while IFS= read -r LINE
do do
if [[ $LINE =~ $ISEXEC ]]; then if [[ $LINE =~ $ISEXEC ]]; then
DESC=$( "$SED" -E 's/^.+"(.*)".*$/\1/g' <<<"$LINE" ) DESC=$( "$SED" -E 's/^exec_test \$1 \$2 "([^"]+)".*$/\1/g' <<<"$LINE" )
(( ++IND < 10 )) && echo -n " " (( ++IND < 10 )) && echo -n " "
echo " $IND) $DESC" echo " $IND) $DESC"
fi fi
@ -183,9 +244,9 @@ if [[ $CHOICE == 0 ]]; then
for (( ; ; )) for (( ; ; ))
do do
read -p "Select a '$TESTENV' test (1-$TESTCOUNT) : " CHOICE read -p "Select a '$TESTENV' test (1-$TESTCOUNT) : " CHOICE
[[ -z "$CHOICE" ]] && { echo '(canceled)' ; exit 1 ; } [[ -z "$CHOICE" ]] && { errout "(canceled)" ; exit 1 ; }
[[ $CHOICE =~ $ISNUM ]] && ((CHOICE >= 1 && CHOICE <= TESTCOUNT)) && break [[ $CHOICE =~ $ISNUM ]] && ((CHOICE >= 1 && CHOICE <= TESTCOUNT)) && break
echo ">>> Invalid test selection '$CHOICE'." errout ">>> Invalid test selection '$CHOICE'."
done done
fi fi
fi fi
@ -193,6 +254,7 @@ fi
# #
# Run the specified test lines # Run the specified test lines
# #
echo -ne "\033[0;33m"
echo "$OUT" | { echo "$OUT" | {
IND=0 IND=0
GOTX=0 GOTX=0
@ -210,27 +272,26 @@ echo "$OUT" | {
} }
((IND == CHOICE)) && { ((IND == CHOICE)) && {
GOTX=1 GOTX=1
[[ $CMD == "" ]] && CMD="$LINE" || CMD=$( echo -e "$CMD$LINE" | $SED -e 's/\\//g' ) [[ $CMD == "" ]] && CMD="$LINE" || CMD=$( echo -e "$CMD$LINE" | $SED -e 's/\\//g' | $SED -E 's/ +/ /g' )
[[ $LINE =~ $ISCONT ]] || { echo $CMD ; eval "$CMD" ; CMD="" ; } [[ $LINE =~ $ISCONT ]] || { echo "$CMD" ; eval "$CMD" ; CMD="" ; }
} }
fi fi
fi fi
done done
} }
echo -ne "\033[0m"
# Make clear it's a TEST # Make clear it's a TEST
opt_set CUSTOM_MACHINE_NAME "\"$TESTENV-tests ($CHOICE)\"" opt_set CUSTOM_MACHINE_NAME "\"$TESTENV-tests ($CHOICE)\""
# Get a -y parameter the lazy way
[[ "$2" == "-y" || "$3" == "-y" ]] && BUILD_YES='Y'
# Build the test too? # Build the test too?
if [[ $BUILD_YES != 'Y' ]]; then if [[ -z "$BUILD_YES" ]]; then
echo echo
read -p "Build $TESTENV test #$CHOICE (y/N) ? " BUILD_YES read -p "Build $TESTENV test #$CHOICE (y/N) ? " BUILD_YES
fi fi
[[ $BUILD_YES == 'Y' || $BUILD_YES == 'Yes' ]] && { [[ $BUILD_YES == 'Y' || $BUILD_YES == 'Yes' ]] && {
pio run -d . -e $TESTENV ((USE_MAKE)) && make tests-single-local TEST_TARGET=$TESTENV ONLY_TEST=$CHOICE
((USE_MAKE)) || pio run -d . -e $TESTENV
echo "$TESTENV" >"$STATE_FILE" echo "$TESTENV" >"$STATE_FILE"
} }

View File

@ -13,7 +13,7 @@ restore_configs
use_example_configs ArmEd use_example_configs ArmEd
opt_set X_DRIVER_TYPE TMC2130 opt_set X_DRIVER_TYPE TMC2130
opt_set Y_DRIVER_TYPE TMC2208 opt_set Y_DRIVER_TYPE TMC2208
exec_test $1 $2 "ArmEd Example Configuration with mixed TMC Drivers" exec_test $1 $2 "ArmEd Example Configuration with mixed TMC Drivers" "$3"
# clean up # clean up
restore_configs restore_configs

View File

@ -14,7 +14,7 @@ opt_set MOTHERBOARD BOARD_BTT_BTT002_V1_0
opt_set SERIAL_PORT 1 opt_set SERIAL_PORT 1
opt_set X_DRIVER_TYPE TMC2209 opt_set X_DRIVER_TYPE TMC2209
opt_set Y_DRIVER_TYPE TMC2130 opt_set Y_DRIVER_TYPE TMC2130
exec_test $1 $2 "BigTreeTech BTT002 Default Configuration plus TMC steppers" exec_test $1 $2 "BigTreeTech BTT002 Default Configuration plus TMC steppers" "$3"
# clean up # clean up
restore_configs restore_configs

View File

@ -37,7 +37,7 @@ opt_set FIL_RUNOUT4_STATE HIGH
opt_enable FIL_RUNOUT4_PULL opt_enable FIL_RUNOUT4_PULL
opt_set FIL_RUNOUT8_STATE HIGH opt_set FIL_RUNOUT8_STATE HIGH
opt_enable FIL_RUNOUT8_PULL opt_enable FIL_RUNOUT8_PULL
exec_test $1 $2 "BigTreeTech GTR 8 Extruders with Auto-Fan, Mixed TMC Drivers, and Runout Sensors with distinct states" exec_test $1 $2 "BigTreeTech GTR 8 Extruders with Auto-Fan, Mixed TMC Drivers, and Runout Sensors with distinct states" "$3"
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_BTT_GTR_V1_0 opt_set MOTHERBOARD BOARD_BTT_GTR_V1_0
@ -53,7 +53,7 @@ opt_set DEFAULT_Kp_LIST "{ 22.2, 20.0, 21.0, 19.0, 18.0, 17.0 }"
opt_set DEFAULT_Ki_LIST "{ 1.08 }" opt_set DEFAULT_Ki_LIST "{ 1.08 }"
opt_set DEFAULT_Kd_LIST "{ 114.0, 112.0, 110.0, 108.0 }" opt_set DEFAULT_Kd_LIST "{ 114.0, 112.0, 110.0, 108.0 }"
opt_enable TOOLCHANGE_FILAMENT_SWAP TOOLCHANGE_MIGRATION_FEATURE TOOLCHANGE_FS_INIT_BEFORE_SWAP TOOLCHANGE_FS_PRIME_FIRST_USED PID_PARAMS_PER_HOTEND opt_enable TOOLCHANGE_FILAMENT_SWAP TOOLCHANGE_MIGRATION_FEATURE TOOLCHANGE_FS_INIT_BEFORE_SWAP TOOLCHANGE_FS_PRIME_FIRST_USED PID_PARAMS_PER_HOTEND
exec_test $1 $2 "BigTreeTech GTR 6 Extruders Triple Z" exec_test $1 $2 "BigTreeTech GTR 6 Extruders Triple Z" "$3"
# clean up # clean up
restore_configs restore_configs

View File

@ -12,7 +12,7 @@ set -e
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_BTT_SKR_PRO_V1_1 opt_set MOTHERBOARD BOARD_BTT_SKR_PRO_V1_1
opt_set SERIAL_PORT 1 opt_set SERIAL_PORT 1
exec_test $1 $2 "BigTreeTech SKR Pro Default Configuration" exec_test $1 $2 "BigTreeTech SKR Pro Default Configuration" "$3"
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_BTT_SKR_PRO_V1_1 opt_set MOTHERBOARD BOARD_BTT_SKR_PRO_V1_1
@ -26,7 +26,7 @@ opt_set E2_AUTO_FAN_PIN PC12
opt_set X_DRIVER_TYPE TMC2209 opt_set X_DRIVER_TYPE TMC2209
opt_set Y_DRIVER_TYPE TMC2130 opt_set Y_DRIVER_TYPE TMC2130
opt_enable BLTOUCH EEPROM_SETTINGS AUTO_BED_LEVELING_3POINT Z_SAFE_HOMING opt_enable BLTOUCH EEPROM_SETTINGS AUTO_BED_LEVELING_3POINT Z_SAFE_HOMING
exec_test $1 $2 "BigTreeTech SKR Pro 3 Extruders, Auto-Fan, BLTOUCH, mixed TMC drivers" exec_test $1 $2 "BigTreeTech SKR Pro 3 Extruders, Auto-Fan, BLTOUCH, mixed TMC drivers" "$3"
# clean up # clean up
restore_configs restore_configs

View File

@ -33,7 +33,7 @@ opt_set EXTRUDER_AUTO_FAN_SPEED 100
opt_set TEMP_SENSOR_CHAMBER 3 opt_set TEMP_SENSOR_CHAMBER 3
opt_add TEMP_CHAMBER_PIN 6 opt_add TEMP_CHAMBER_PIN 6
opt_set HEATER_CHAMBER_PIN 45 opt_set HEATER_CHAMBER_PIN 45
exec_test $1 $2 "RAMPS4DUE_EFB with ABL (Bilinear), ExtUI, S-Curve, many options." exec_test $1 $2 "RAMPS4DUE_EFB with ABL (Bilinear), ExtUI, S-Curve, many options." "$3"
# #
# RADDS with BLTouch, ABL(B), 3 x Z auto-align # RADDS with BLTouch, ABL(B), 3 x Z auto-align
@ -51,7 +51,7 @@ opt_add Z2_MAX_PIN 2
opt_add Z3_MAX_PIN 3 opt_add Z3_MAX_PIN 3
pins_set ramps/RAMPS X_MAX_PIN -1 pins_set ramps/RAMPS X_MAX_PIN -1
pins_set ramps/RAMPS Y_MAX_PIN -1 pins_set ramps/RAMPS Y_MAX_PIN -1
exec_test $1 $2 "RADDS with ABL (Bilinear), Triple Z Axis, Z_STEPPER_AUTO_ALIGN" exec_test $1 $2 "RADDS with ABL (Bilinear), Triple Z Axis, Z_STEPPER_AUTO_ALIGN" "$3"
# #
# Test SWITCHING_EXTRUDER # Test SWITCHING_EXTRUDER
@ -62,4 +62,4 @@ opt_set MOTHERBOARD BOARD_RAMPS4DUE_EEF
opt_set EXTRUDERS 2 opt_set EXTRUDERS 2
opt_set NUM_SERVOS 1 opt_set NUM_SERVOS 1
opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER BEEP_ON_FEEDRATE_CHANGE POWER_LOSS_RECOVERY opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER BEEP_ON_FEEDRATE_CHANGE POWER_LOSS_RECOVERY
exec_test $1 $2 "RAMPS4DUE_EEF with SWITCHING_EXTRUDER, POWER_LOSS_RECOVERY" exec_test $1 $2 "RAMPS4DUE_EEF with SWITCHING_EXTRUDER, POWER_LOSS_RECOVERY" "$3"

View File

@ -10,12 +10,12 @@ set -e
# Test Archim 1 # Test Archim 1
# #
use_example_configs UltiMachine/Archim1 use_example_configs UltiMachine/Archim1
exec_test $1 $2 "Archim 1 base configuration" exec_test $1 $2 "Archim 1 base configuration" "$3"
# #
# Test Archim 2 # Test Archim 2
# #
use_example_configs UltiMachine/Archim2 use_example_configs UltiMachine/Archim2
exec_test $1 $2 "Archim 2 base configuration" exec_test $1 $2 "Archim 2 base configuration" "$3"
restore_configs restore_configs

View File

@ -12,7 +12,7 @@ opt_set MOTHERBOARD BOARD_FLYF407ZG
opt_set SERIAL_PORT -1 opt_set SERIAL_PORT -1
opt_set X_DRIVER_TYPE TMC2208 opt_set X_DRIVER_TYPE TMC2208
opt_set Y_DRIVER_TYPE TMC2130 opt_set Y_DRIVER_TYPE TMC2130
exec_test $1 $2 "FLYF407ZG Default Config with mixed TMC Drivers" exec_test $1 $2 "FLYF407ZG Default Config with mixed TMC Drivers" "$3"
# cleanup # cleanup
restore_configs restore_configs

View File

@ -12,7 +12,7 @@ set -e
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_FYSETC_F6_13 opt_set MOTHERBOARD BOARD_FYSETC_F6_13
opt_enable DGUS_LCD_UI_FYSETC opt_enable DGUS_LCD_UI_FYSETC
exec_test $1 $2 "FYSETC F6 1.3 with DGUS" exec_test $1 $2 "FYSETC F6 1.3 with DGUS" "$3"
# clean up # clean up
restore_configs restore_configs

View File

@ -11,7 +11,7 @@ restore_configs
use_example_configs FYSETC/S6 use_example_configs FYSETC/S6
opt_set Y_DRIVER_TYPE TMC2209 opt_set Y_DRIVER_TYPE TMC2209
opt_set Z_DRIVER_TYPE TMC2130 opt_set Z_DRIVER_TYPE TMC2130
exec_test $1 $2 "FYSETC S6 Example" exec_test $1 $2 "FYSETC S6 Example" "$3"
# cleanup # cleanup
restore_configs restore_configs

View File

@ -12,7 +12,7 @@ set -e
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_LERDGE_X opt_set MOTHERBOARD BOARD_LERDGE_X
opt_set SERIAL_PORT 1 opt_set SERIAL_PORT 1
exec_test $1 $2 "LERDGE X with Default Configuration" exec_test $1 $2 "LERDGE X with Default Configuration" "$3"
# clean up # clean up
restore_configs restore_configs

View File

@ -17,7 +17,7 @@ restore_configs
opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EFB opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EFB
opt_enable VIKI2 SDSUPPORT SDCARD_READONLY SERIAL_PORT_2 NEOPIXEL_LED opt_enable VIKI2 SDSUPPORT SDCARD_READONLY SERIAL_PORT_2 NEOPIXEL_LED
opt_set NEOPIXEL_PIN P1_16 opt_set NEOPIXEL_PIN P1_16
exec_test $1 $2 "ReARM EFB VIKI2, SDSUPPORT, 2 Serial ports (USB CDC + UART0), NeoPixel" exec_test $1 $2 "ReARM EFB VIKI2, SDSUPPORT, 2 Serial ports (USB CDC + UART0), NeoPixel" "$3"
#restore_configs #restore_configs
#use_example_configs Mks/Sbase #use_example_configs Mks/Sbase
@ -30,7 +30,7 @@ opt_set TEMP_SENSOR_1 1
opt_set NUM_SERVOS 2 opt_set NUM_SERVOS 2
opt_set SERVO_DELAY "{ 300, 300 }" opt_set SERVO_DELAY "{ 300, 300 }"
opt_enable SWITCHING_NOZZLE SWITCHING_NOZZLE_E1_SERVO_NR ULTIMAKERCONTROLLER opt_enable SWITCHING_NOZZLE SWITCHING_NOZZLE_E1_SERVO_NR ULTIMAKERCONTROLLER
exec_test $1 $2 "MKS SBASE with SWITCHING_NOZZLE" exec_test $1 $2 "MKS SBASE with SWITCHING_NOZZLE" "$3"
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EEB opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EEB
@ -47,7 +47,7 @@ opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT ADAPTIVE_FAN_
LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA EMERGENCY_PARSER LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA EMERGENCY_PARSER
opt_set GRID_MAX_POINTS_X 16 opt_set GRID_MAX_POINTS_X 16
opt_set NOZZLE_TO_PROBE_OFFSET "{ 0, 0, 0 }" opt_set NOZZLE_TO_PROBE_OFFSET "{ 0, 0, 0 }"
exec_test $1 $2 "Re-ARM with NOZZLE_AS_PROBE and many features." exec_test $1 $2 "Re-ARM with NOZZLE_AS_PROBE and many features." "$3"
# clean up # clean up
restore_configs restore_configs

View File

@ -10,7 +10,7 @@ set -e
# Build with the default configurations # Build with the default configurations
# #
use_example_configs Azteeg/X5GT use_example_configs Azteeg/X5GT
exec_test $1 $2 "Azteeg X5GT Example Configuration" exec_test $1 $2 "Azteeg X5GT Example Configuration" "$3"
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_SMOOTHIEBOARD opt_set MOTHERBOARD BOARD_SMOOTHIEBOARD
@ -25,7 +25,7 @@ opt_enable VIKI2 SDSUPPORT ADAPTIVE_FAN_SLOWING NO_FAN_SLOWING_IN_PID_TUNING \
LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA EMERGENCY_PARSER LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA EMERGENCY_PARSER
opt_disable SD_PROCEDURE_DEPTH opt_disable SD_PROCEDURE_DEPTH
opt_set GRID_MAX_POINTS_X 16 opt_set GRID_MAX_POINTS_X 16
exec_test $1 $2 "Smoothieboard with many features" exec_test $1 $2 "Smoothieboard with many features" "$3"
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_SMOOTHIEBOARD opt_set MOTHERBOARD BOARD_SMOOTHIEBOARD
@ -39,7 +39,7 @@ opt_enable TFTGLCD_PANEL_SPI SDSUPPORT ADAPTIVE_FAN_SLOWING NO_FAN_SLOWING_IN_PI
Z_SAFE_HOMING ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE \ Z_SAFE_HOMING ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE \
LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA EMERGENCY_PARSER LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA EMERGENCY_PARSER
opt_set GRID_MAX_POINTS_X 16 opt_set GRID_MAX_POINTS_X 16
exec_test $1 $2 "Smoothieboard with TFTGLCD_PANEL_SPI" exec_test $1 $2 "Smoothieboard with TFTGLCD_PANEL_SPI" "$3"
#restore_configs #restore_configs
#opt_set MOTHERBOARD BOARD_AZTEEG_X5_MINI_WIFI #opt_set MOTHERBOARD BOARD_AZTEEG_X5_MINI_WIFI
@ -67,7 +67,7 @@ opt_enable AUTO_BED_LEVELING_BILINEAR EEPROM_SETTINGS EEPROM_CHITCHAT MECHANICAL
SENSORLESS_PROBING Z_SAFE_HOMING X_STALL_SENSITIVITY Y_STALL_SENSITIVITY Z_STALL_SENSITIVITY TMC_DEBUG \ SENSORLESS_PROBING Z_SAFE_HOMING X_STALL_SENSITIVITY Y_STALL_SENSITIVITY Z_STALL_SENSITIVITY TMC_DEBUG \
EXPERIMENTAL_I2CBUS EXPERIMENTAL_I2CBUS
opt_disable PSU_CONTROL opt_disable PSU_CONTROL
exec_test $1 $2 "Cohesion3D Remix DELTA + ABL Bilinear + EEPROM + SENSORLESS_PROBING" exec_test $1 $2 "Cohesion3D Remix DELTA + ABL Bilinear + EEPROM + SENSORLESS_PROBING" "$3"
# clean up # clean up
restore_configs restore_configs

View File

@ -15,7 +15,7 @@ opt_set SERIAL_PORT -1
opt_enable BLTOUCH Z_SAFE_HOMING SPEAKER opt_enable BLTOUCH Z_SAFE_HOMING SPEAKER
opt_set X_DRIVER_TYPE TMC2209 opt_set X_DRIVER_TYPE TMC2209
opt_set Y_DRIVER_TYPE TMC2208 opt_set Y_DRIVER_TYPE TMC2208
exec_test $1 $2 "Mixed timer usage" exec_test $1 $2 "Mixed timer usage" "$3"
# clean up # clean up
restore_configs restore_configs

View File

@ -33,7 +33,7 @@ opt_enable ENDSTOP_INTERRUPTS_FEATURE S_CURVE_ACCELERATION BLTOUCH Z_MIN_PROBE_R
MOVE_Z_WHEN_IDLE BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY \ MOVE_Z_WHEN_IDLE BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY \
LIN_ADVANCE ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE MONITOR_DRIVER_STATUS SENSORLESS_HOMING \ LIN_ADVANCE ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE MONITOR_DRIVER_STATUS SENSORLESS_HOMING \
SQUARE_WAVE_STEPPING TMC_DEBUG EXPERIMENTAL_SCURVE SQUARE_WAVE_STEPPING TMC_DEBUG EXPERIMENTAL_SCURVE
exec_test $1 $2 "Build Grand Central M4 Default Configuration" exec_test $1 $2 "Build Grand Central M4 Default Configuration" "$3"
# clean up # clean up
restore_configs restore_configs

View File

@ -9,7 +9,7 @@ set -e
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_MALYAN_M200_V2 opt_set MOTHERBOARD BOARD_MALYAN_M200_V2
opt_set SERIAL_PORT -1 opt_set SERIAL_PORT -1
exec_test $1 $2 "Malyan M200 v2 Default Config" exec_test $1 $2 "Malyan M200 v2 Default Config" "$3"
# cleanup # cleanup
restore_configs restore_configs

View File

@ -9,7 +9,7 @@ set -e
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_MALYAN_M200_V2 opt_set MOTHERBOARD BOARD_MALYAN_M200_V2
opt_set SERIAL_PORT -1 opt_set SERIAL_PORT -1
exec_test $1 $2 "Malyan M200 v2 Default Config" exec_test $1 $2 "Malyan M200 v2 Default Config" "$3"
# cleanup # cleanup
restore_configs restore_configs

View File

@ -7,7 +7,7 @@
set -e set -e
use_example_configs Malyan/M200 use_example_configs Malyan/M200
exec_test $1 $2 "Malyan M200" exec_test $1 $2 "Malyan M200" "$3"
# cleanup # cleanup
restore_configs restore_configs

View File

@ -22,7 +22,7 @@ opt_set Y_SLAVE_ADDRESS 1
opt_set Z_SLAVE_ADDRESS 2 opt_set Z_SLAVE_ADDRESS 2
opt_set E0_SLAVE_ADDRESS 3 opt_set E0_SLAVE_ADDRESS 3
exec_test $1 $2 "BigTreeTech SKR Mini E3 1.0 - Basic Config with TMC2209 HW Serial" exec_test $1 $2 "BigTreeTech SKR Mini E3 1.0 - Basic Config with TMC2209 HW Serial" "$3"
# clean up # clean up
restore_configs restore_configs

View File

@ -13,7 +13,7 @@ restore_configs
opt_set MOTHERBOARD BOARD_BTT_SKR_MINI_V1_1 opt_set MOTHERBOARD BOARD_BTT_SKR_MINI_V1_1
opt_set SERIAL_PORT 1 opt_set SERIAL_PORT 1
opt_set SERIAL_PORT_2 -1 opt_set SERIAL_PORT_2 -1
exec_test $1 $2 "BigTreeTech SKR Mini v1.1 - Basic Configuration" exec_test $1 $2 "BigTreeTech SKR Mini v1.1 - Basic Configuration" "$3"
# clean up # clean up
restore_configs restore_configs

View File

@ -10,7 +10,7 @@ set -e
# Build with the default configurations # Build with the default configurations
# #
use_example_configs "Creality/Ender-3/FYSETC Cheetah 1.2/base" use_example_configs "Creality/Ender-3/FYSETC Cheetah 1.2/base"
exec_test $1 $2 "Cheetah 1.2 Configuration" exec_test $1 $2 "Cheetah 1.2 Configuration" "$3"
# clean up # clean up
restore_configs restore_configs

View File

@ -17,7 +17,7 @@ opt_set X_DRIVER_TYPE TMC2208
opt_set Y_DRIVER_TYPE TMC2208 opt_set Y_DRIVER_TYPE TMC2208
opt_set Z_DRIVER_TYPE TMC2208 opt_set Z_DRIVER_TYPE TMC2208
opt_set E0_DRIVER_TYPE TMC2208 opt_set E0_DRIVER_TYPE TMC2208
exec_test $1 $2 "MEEB_3DP - Basic Config with TMC2208 SW Serial" exec_test $1 $2 "MEEB_3DP - Basic Config with TMC2208 SW Serial" "$3"
# clean up # clean up
restore_configs restore_configs

View File

@ -16,7 +16,7 @@ opt_set SERIAL_PORT -1
opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT \ opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT \
PAREN_COMMENTS GCODE_MOTION_MODES SINGLENOZZLE TOOLCHANGE_FILAMENT_SWAP TOOLCHANGE_PARK \ PAREN_COMMENTS GCODE_MOTION_MODES SINGLENOZZLE TOOLCHANGE_FILAMENT_SWAP TOOLCHANGE_PARK \
BAUD_RATE_GCODE GCODE_MACROS NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE BAUD_RATE_GCODE GCODE_MACROS NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE
exec_test $1 $2 "STM32F1R EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT PAREN_COMMENTS GCODE_MOTION_MODES" exec_test $1 $2 "STM32F1R EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT PAREN_COMMENTS GCODE_MOTION_MODES" "$3"
# cleanup # cleanup
restore_configs restore_configs

View File

@ -11,6 +11,6 @@ set -e
# #
use_example_configs "Creality/Ender-3 V2" use_example_configs "Creality/Ender-3 V2"
opt_enable MARLIN_DEV_MODE opt_enable MARLIN_DEV_MODE
exec_test $1 $2 "Ender 3 v2" exec_test $1 $2 "Ender 3 v2" "$3"
restore_configs restore_configs

View File

@ -15,7 +15,7 @@ opt_set SERIAL_PORT 1
opt_set SERIAL_PORT_2 -1 opt_set SERIAL_PORT_2 -1
opt_set X_DRIVER_TYPE TMC2209 opt_set X_DRIVER_TYPE TMC2209
opt_set Y_DRIVER_TYPE TMC2130 opt_set Y_DRIVER_TYPE TMC2130
exec_test $1 $2 "BigTreeTech SKR E3 DIP v1.0 - Basic Config with mixed TMC Drivers" exec_test $1 $2 "BigTreeTech SKR E3 DIP v1.0 - Basic Config with mixed TMC Drivers" "$3"
# clean up # clean up
restore_configs restore_configs

View File

@ -13,7 +13,7 @@ restore_configs
opt_set MOTHERBOARD BOARD_BTT_SKR_E3_DIP opt_set MOTHERBOARD BOARD_BTT_SKR_E3_DIP
opt_set SERIAL_PORT 1 opt_set SERIAL_PORT 1
opt_set SERIAL_PORT_2 -1 opt_set SERIAL_PORT_2 -1
exec_test $1 $2 "BigTreeTech SKR E3 DIP v1.0 - Basic Configuration" exec_test $1 $2 "BigTreeTech SKR E3 DIP v1.0 - Basic Configuration" "$3"
# clean up # clean up
restore_configs restore_configs

View File

@ -8,7 +8,7 @@ set -e
use_example_configs Alfawise/U20 use_example_configs Alfawise/U20
opt_enable BAUD_RATE_GCODE opt_enable BAUD_RATE_GCODE
exec_test $1 $2 "Full-featured U20 config" exec_test $1 $2 "Full-featured U20 config" "$3"
# cleanup # cleanup
restore_configs restore_configs

View File

@ -10,7 +10,7 @@ set -e
# Build with the default configurations # Build with the default configurations
# #
use_example_configs STM32/STM32F4 use_example_configs STM32/STM32F4
exec_test $1 $2 "STM32F4 Default Configuration" exec_test $1 $2 "STM32F4 Default Configuration" "$3"
# clean up # clean up
restore_configs restore_configs

View File

@ -10,7 +10,7 @@ set -e
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_STEVAL_3DP001V1 opt_set MOTHERBOARD BOARD_STEVAL_3DP001V1
opt_set SERIAL_PORT -1 opt_set SERIAL_PORT -1
exec_test $1 $2 "STM32F401VE_STEVAL Default Config" exec_test $1 $2 "STM32F401VE_STEVAL Default Config" "$3"
# cleanup # cleanup
restore_configs restore_configs

View File

@ -9,7 +9,7 @@ set -e
restore_configs restore_configs
use_example_configs STM32/Black_STM32F407VET6 use_example_configs STM32/Black_STM32F407VET6
opt_enable BAUD_RATE_GCODE opt_enable BAUD_RATE_GCODE
exec_test $1 $2 "Full-featured Sample Black STM32F407VET6 config" exec_test $1 $2 "Full-featured Sample Black STM32F407VET6 config" "$3"
# cleanup # cleanup
restore_configs restore_configs

View File

@ -12,7 +12,7 @@ set -e
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_REMRAM_V1 opt_set MOTHERBOARD BOARD_REMRAM_V1
opt_set SERIAL_PORT 1 opt_set SERIAL_PORT 1
exec_test $1 $2 "Default Configuration" exec_test $1 $2 "Default Configuration" "$3"
# clean up # clean up
restore_configs restore_configs

View File

@ -11,7 +11,7 @@ set -e
# #
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_BRAINWAVE_PRO opt_set MOTHERBOARD BOARD_BRAINWAVE_PRO
exec_test $1 $2 "Default Configuration" exec_test $1 $2 "Default Configuration" "$3"
# clean up # clean up
restore_configs restore_configs

View File

@ -11,12 +11,12 @@ set -e
# #
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_PRINTRBOARD opt_set MOTHERBOARD BOARD_PRINTRBOARD
exec_test $1 $2 "Printrboard Configuration" exec_test $1 $2 "Printrboard Configuration" "$3"
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_PRINTRBOARD_REVF opt_set MOTHERBOARD BOARD_PRINTRBOARD_REVF
opt_enable MINIPANEL opt_enable MINIPANEL
exec_test $1 $2 "Printrboard RevF with MiniPanel and Stepper DAC (in pins file)" exec_test $1 $2 "Printrboard RevF with MiniPanel and Stepper DAC (in pins file)" "$3"
# clean up # clean up
restore_configs restore_configs

View File

@ -15,7 +15,7 @@ opt_enable WIFISUPPORT WEBSUPPORT GCODE_MACROS BAUD_RATE_GCODE M115_GEOMETRY_REP
opt_add WIFI_SSID "\"ssid\"" opt_add WIFI_SSID "\"ssid\""
opt_add WIFI_PWD "\"password\"" opt_add WIFI_PWD "\"password\""
opt_set TX_BUFFER_SIZE 64 opt_set TX_BUFFER_SIZE 64
exec_test $1 $2 "ESP32 with WIFISUPPORT and WEBSUPPORT" exec_test $1 $2 "ESP32 with WIFISUPPORT and WEBSUPPORT" "$3"
# #
# Build with TMC drivers using hardware serial # Build with TMC drivers using hardware serial
@ -35,7 +35,7 @@ opt_set Y_SLAVE_ADDRESS 1
opt_set Z_SLAVE_ADDRESS 2 opt_set Z_SLAVE_ADDRESS 2
opt_set E0_SLAVE_ADDRESS 3 opt_set E0_SLAVE_ADDRESS 3
opt_enable HOTEND_IDLE_TIMEOUT opt_enable HOTEND_IDLE_TIMEOUT
exec_test $1 $2 "ESP32, TMC HW Serial, Hotend Idle" exec_test $1 $2 "ESP32, TMC HW Serial, Hotend Idle" "$3"
# cleanup # cleanup
restore_configs restore_configs

View File

@ -10,7 +10,7 @@ set -e
# Build with the default configurations # Build with the default configurations
# #
use_example_configs JGAurora/A5S use_example_configs JGAurora/A5S
exec_test $1 $2 "JGAurora/A5S Configuration" exec_test $1 $2 "JGAurora/A5S Configuration" "$3"
# clean up # clean up
restore_configs restore_configs

View File

@ -13,7 +13,7 @@ restore_configs
opt_set MOTHERBOARD BOARD_LINUX_RAMPS opt_set MOTHERBOARD BOARD_LINUX_RAMPS
opt_set TEMP_SENSOR_BED 1 opt_set TEMP_SENSOR_BED 1
opt_enable PIDTEMPBED EEPROM_SETTINGS BAUD_RATE_GCODE opt_enable PIDTEMPBED EEPROM_SETTINGS BAUD_RATE_GCODE
exec_test $1 $2 "Linux with EEPROM" exec_test $1 $2 "Linux with EEPROM" "$3"
# cleanup # cleanup
restore_configs restore_configs

View File

@ -10,7 +10,7 @@ restore_configs
use_example_configs "delta/Malyan M300" use_example_configs "delta/Malyan M300"
opt_disable AUTO_BED_LEVELING_3POINT opt_disable AUTO_BED_LEVELING_3POINT
opt_set LCD_SERIAL_PORT 1 opt_set LCD_SERIAL_PORT 1
exec_test $1 $2 "Malyan M300 (delta)" exec_test $1 $2 "Malyan M300 (delta)" "$3"
# cleanup # cleanup
restore_configs restore_configs

View File

@ -27,7 +27,7 @@ opt_set POWER_MONITOR_CURRENT_PIN 14
opt_set POWER_MONITOR_VOLTAGE_PIN 15 opt_set POWER_MONITOR_VOLTAGE_PIN 15
opt_set CLOSED_LOOP_ENABLE_PIN 44 opt_set CLOSED_LOOP_ENABLE_PIN 44
opt_set CLOSED_LOOP_MOVE_COMPLETE_PIN 45 opt_set CLOSED_LOOP_MOVE_COMPLETE_PIN 45
exec_test $1 $2 "Spindle, MESH_BED_LEVELING, closed loop, Power Monitor, and LCD" exec_test $1 $2 "Spindle, MESH_BED_LEVELING, closed loop, Power Monitor, and LCD" "$3"
# #
# Test DUAL_X_CARRIAGE # Test DUAL_X_CARRIAGE
@ -39,21 +39,21 @@ opt_set EXTRUDERS 2
opt_set TEMP_SENSOR_1 1 opt_set TEMP_SENSOR_1 1
opt_enable USE_XMAX_PLUG DUAL_X_CARRIAGE REPRAPWORLD_KEYPAD opt_enable USE_XMAX_PLUG DUAL_X_CARRIAGE REPRAPWORLD_KEYPAD
opt_set REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 opt_set REPRAPWORLD_KEYPAD_MOVE_STEP 10.0
exec_test $1 $2 "TT Oscar | DUAL_X_CARRIAGE" exec_test $1 $2 "TT Oscar | DUAL_X_CARRIAGE" "$3"
# #
# Delta Config (generic) + Probeless # Delta Config (generic) + Probeless
# #
use_example_configs delta/generic use_example_configs delta/generic
opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER DELTA_AUTO_CALIBRATION DELTA_CALIBRATION_MENU opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER DELTA_AUTO_CALIBRATION DELTA_CALIBRATION_MENU
exec_test $1 $2 "RAMPS | DELTA | RRD LCD | DELTA_AUTO_CALIBRATION | DELTA_CALIBRATION_MENU" exec_test $1 $2 "RAMPS | DELTA | RRD LCD | DELTA_AUTO_CALIBRATION | DELTA_CALIBRATION_MENU" "$3"
# #
# Delta Config (generic) + ABL bilinear + BLTOUCH # Delta Config (generic) + ABL bilinear + BLTOUCH
use_example_configs delta/generic use_example_configs delta/generic
opt_set LCD_LANGUAGE cz opt_set LCD_LANGUAGE cz
opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER DELTA_CALIBRATION_MENU AUTO_BED_LEVELING_BILINEAR BLTOUCH opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER DELTA_CALIBRATION_MENU AUTO_BED_LEVELING_BILINEAR BLTOUCH
exec_test $1 $2 "DELTA | RRD LCD | ABL Bilinear | BLTOUCH" exec_test $1 $2 "DELTA | RRD LCD | ABL Bilinear | BLTOUCH" "$3"
# clean up # clean up
restore_configs restore_configs

View File

@ -32,7 +32,7 @@ opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATU
MULTI_NOZZLE_DUPLICATION CLASSIC_JERK LIN_ADVANCE EXTRA_LIN_ADVANCE_K QUICK_HOME \ MULTI_NOZZLE_DUPLICATION CLASSIC_JERK LIN_ADVANCE EXTRA_LIN_ADVANCE_K QUICK_HOME \
LCD_SET_PROGRESS_MANUALLY PRINT_PROGRESS_SHOW_DECIMALS SHOW_REMAINING_TIME \ LCD_SET_PROGRESS_MANUALLY PRINT_PROGRESS_SHOW_DECIMALS SHOW_REMAINING_TIME \
BABYSTEPPING BABYSTEP_XY NANODLP_Z_SYNC I2C_POSITION_ENCODERS M114_DETAIL BABYSTEPPING BABYSTEP_XY NANODLP_Z_SYNC I2C_POSITION_ENCODERS M114_DETAIL
exec_test $1 $2 "Azteeg X3 Pro | EXTRUDERS 5 | RRDFGSC | UBL | LIN_ADVANCE ..." exec_test $1 $2 "Azteeg X3 Pro | EXTRUDERS 5 | RRDFGSC | UBL | LIN_ADVANCE ..." "$3"
# #
# Add a Sled Z Probe, use UBL Cartesian moves, use Japanese language # Add a Sled Z Probe, use UBL Cartesian moves, use Japanese language
@ -58,7 +58,7 @@ opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATU
opt_set LCD_LANGUAGE jp_kana opt_set LCD_LANGUAGE jp_kana
opt_disable SEGMENT_LEVELED_MOVES opt_disable SEGMENT_LEVELED_MOVES
opt_enable BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET DOUBLECLICK_FOR_Z_BABYSTEPPING BABYSTEP_HOTEND_Z_OFFSET BABYSTEP_DISPLAY_TOTAL M114_DETAIL opt_enable BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET DOUBLECLICK_FOR_Z_BABYSTEPPING BABYSTEP_HOTEND_Z_OFFSET BABYSTEP_DISPLAY_TOTAL M114_DETAIL
exec_test $1 $2 "Azteeg X3 Pro | EXTRUDERS 5 | RRDFGSC | UBL | LIN_ADVANCE | Sled Probe | Skew | JP-Kana | Babystep offsets ..." exec_test $1 $2 "Azteeg X3 Pro | EXTRUDERS 5 | RRDFGSC | UBL | LIN_ADVANCE | Sled Probe | Skew | JP-Kana | Babystep offsets ..." "$3"
# #
# Test a Servo Probe # Test a Servo Probe
@ -73,7 +73,7 @@ opt_enable ZONESTAR_LCD Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_
NO_VOLUMETRICS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES AUTOTEMP G38_PROBE_TARGET JOYSTICK \ NO_VOLUMETRICS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES AUTOTEMP G38_PROBE_TARGET JOYSTICK \
PRUSA_MMU2 MMU2_MENUS PRUSA_MMU2_S_MODE DIRECT_STEPPING DETECT_BROKEN_ENDSTOP \ PRUSA_MMU2 MMU2_MENUS PRUSA_MMU2_S_MODE DIRECT_STEPPING DETECT_BROKEN_ENDSTOP \
FILAMENT_RUNOUT_SENSOR NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE Z_SAFE_HOMING FILAMENT_RUNOUT_SENSOR NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE Z_SAFE_HOMING
exec_test $1 $2 "RAMPS | ZONESTAR + Chinese | MMU2 | Servo | 3-Point + Debug | G38 ..." exec_test $1 $2 "RAMPS | ZONESTAR + Chinese | MMU2 | Servo | 3-Point + Debug | G38 ..." "$3"
# #
# 5 runout sensors with distinct states # 5 runout sensors with distinct states
@ -110,7 +110,7 @@ opt_add M100_FREE_MEMORY_DUMPER
opt_add M100_FREE_MEMORY_CORRUPTOR opt_add M100_FREE_MEMORY_CORRUPTOR
opt_set PWM_MOTOR_CURRENT "{ 1300, 1300, 1250 }" opt_set PWM_MOTOR_CURRENT "{ 1300, 1300, 1250 }"
opt_set I2C_SLAVE_ADDRESS 63 opt_set I2C_SLAVE_ADDRESS 63
exec_test $1 $2 "MEGACONTROLLER | Minipanel | M100 | PWM_MOTOR_CURRENT | PRINTCOUNTER | Advanced Pause ..." exec_test $1 $2 "MEGACONTROLLER | Minipanel | M100 | PWM_MOTOR_CURRENT | PRINTCOUNTER | Advanced Pause ..." "$3"
# #
# Mixing Extruder with 5 steppers, Greek # Mixing Extruder with 5 steppers, Greek
@ -122,7 +122,7 @@ opt_enable MIXING_EXTRUDER GRADIENT_MIX GRADIENT_VTOOL CR10_STOCKDISPLAY \
USE_CONTROLLER_FAN CONTROLLER_FAN_EDITABLE CONTROLLER_FAN_IGNORE_Z USE_CONTROLLER_FAN CONTROLLER_FAN_EDITABLE CONTROLLER_FAN_IGNORE_Z
opt_set MIXING_STEPPERS 5 opt_set MIXING_STEPPERS 5
opt_set LCD_LANGUAGE ru opt_set LCD_LANGUAGE ru
exec_test $1 $2 "Azteeg X3 | Mixing Extruder (x5) | Gradient Mix | Greek" exec_test $1 $2 "Azteeg X3 | Mixing Extruder (x5) | Gradient Mix | Greek" "$3"
# #
# Test SPEAKER with BOARD_BQ_ZUM_MEGA_3D and BQ_LCD_SMART_CONTROLLER # Test SPEAKER with BOARD_BQ_ZUM_MEGA_3D and BQ_LCD_SMART_CONTROLLER
@ -163,7 +163,7 @@ opt_set FAN_MIN_PWM 50
opt_set FAN_KICKSTART_TIME 100 opt_set FAN_KICKSTART_TIME 100
opt_set XY_FREQUENCY_LIMIT 15 opt_set XY_FREQUENCY_LIMIT 15
opt_add FILWIDTH_PIN 5 opt_add FILWIDTH_PIN 5
exec_test $1 $2 "Mightyboard Rev. E | CoreXY, Gradient Mix | Endstop Int. | Home Y > X | FW Retract ..." exec_test $1 $2 "Mightyboard Rev. E | CoreXY, Gradient Mix | Endstop Int. | Home Y > X | FW Retract ..." "$3"
######## Other Standard LCD/Panels ############## ######## Other Standard LCD/Panels ##############
# #
@ -286,13 +286,13 @@ opt_add L6470_CHAIN_MISO_PIN 49
opt_add L6470_CHAIN_MOSI_PIN 40 opt_add L6470_CHAIN_MOSI_PIN 40
opt_add L6470_CHAIN_SS_PIN 42 opt_add L6470_CHAIN_SS_PIN 42
opt_add "ENABLE_RESET_L64XX_CHIPS(V) NOOP" opt_add "ENABLE_RESET_L64XX_CHIPS(V) NOOP"
exec_test $1 $2 "DELTA, RAMPS, L6470, UBL, Allen Key, EEPROM, OLED_PANEL_TINYBOY2..." exec_test $1 $2 "DELTA, RAMPS, L6470, UBL, Allen Key, EEPROM, OLED_PANEL_TINYBOY2..." "$3"
# #
# Delta Config (FLSUN AC because it's complex) # Delta Config (FLSUN AC because it's complex)
# #
use_example_configs delta/FLSUN/auto_calibrate use_example_configs delta/FLSUN/auto_calibrate
exec_test $1 $2 "RAMPS 1.3 | DELTA | FLSUN AC Config" exec_test $1 $2 "RAMPS 1.3 | DELTA | FLSUN AC Config" "$3"
# #
# Makibox Config need to check board type for Teensy++ 2.0 # Makibox Config need to check board type for Teensy++ 2.0
@ -315,7 +315,7 @@ opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER \
MARLIN_BRICKOUT MARLIN_INVADERS MARLIN_SNAKE \ MARLIN_BRICKOUT MARLIN_INVADERS MARLIN_SNAKE \
MONITOR_DRIVER_STATUS STEALTHCHOP_XY STEALTHCHOP_Z STEALTHCHOP_E HYBRID_THRESHOLD \ MONITOR_DRIVER_STATUS STEALTHCHOP_XY STEALTHCHOP_Z STEALTHCHOP_E HYBRID_THRESHOLD \
USE_ZMIN_PLUG SENSORLESS_HOMING TMC_DEBUG M114_DETAIL USE_ZMIN_PLUG SENSORLESS_HOMING TMC_DEBUG M114_DETAIL
exec_test $1 $2 "RAMPS | Mixed TMC | Sensorless | RRDFGSC | Games" exec_test $1 $2 "RAMPS | Mixed TMC | Sensorless | RRDFGSC | Games" "$3"
# #
# SCARA with Mixed TMC # SCARA with Mixed TMC
@ -330,7 +330,7 @@ opt_set X_DRIVER_TYPE TMC2209
opt_set Y_DRIVER_TYPE TMC2130 opt_set Y_DRIVER_TYPE TMC2130
opt_set Z_DRIVER_TYPE TMC2130_STANDALONE opt_set Z_DRIVER_TYPE TMC2130_STANDALONE
opt_set E0_DRIVER_TYPE TMC2660 opt_set E0_DRIVER_TYPE TMC2660
exec_test $1 $2 "RAMPS | SCARA | Mixed TMC | EEPROM" exec_test $1 $2 "RAMPS | SCARA | Mixed TMC | EEPROM" "$3"
# #
# tvrrug Config need to check board type for sanguino atmega644p # tvrrug Config need to check board type for sanguino atmega644p

View File

@ -8,7 +8,7 @@
set -e set -e
use_example_configs Mks/Robin use_example_configs Mks/Robin
exec_test $1 $2 "MKS Robin config (FSMC Color UI)" exec_test $1 $2 "MKS Robin config (FSMC Color UI)" "$3"
# cleanup # cleanup
restore_configs restore_configs

View File

@ -11,7 +11,7 @@ opt_set MOTHERBOARD BOARD_MKS_ROBIN_LITE
opt_set SERIAL_PORT 1 opt_set SERIAL_PORT 1
opt_enable EEPROM_SETTINGS opt_enable EEPROM_SETTINGS
opt_enable SDSUPPORT opt_enable SDSUPPORT
exec_test $1 $2 "Default Configuration with Fallback SD EEPROM" exec_test $1 $2 "Default Configuration with Fallback SD EEPROM" "$3"
# cleanup # cleanup
restore_configs restore_configs

View File

@ -11,7 +11,7 @@ use_example_configs Mks/Robin
opt_set MOTHERBOARD BOARD_MKS_ROBIN_MINI opt_set MOTHERBOARD BOARD_MKS_ROBIN_MINI
opt_set EXTRUDERS 1 opt_set EXTRUDERS 1
opt_set TEMP_SENSOR_1 0 opt_set TEMP_SENSOR_1 0
exec_test $1 $2 "MKS Robin mini" exec_test $1 $2 "MKS Robin mini" "$3"
# cleanup # cleanup
restore_configs restore_configs

View File

@ -12,7 +12,7 @@ set -e
# #
use_example_configs Mks/Robin use_example_configs Mks/Robin
opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO
exec_test $1 $2 "MKS Robin nano v1.2 Emulated DOGM FSMC" exec_test $1 $2 "MKS Robin nano v1.2 Emulated DOGM FSMC" "$3"
# #
# MKS Robin v2 nano Emulated DOGM SPI # MKS Robin v2 nano Emulated DOGM SPI
@ -22,7 +22,7 @@ use_example_configs Mks/Robin
opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2 opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
opt_disable TFT_INTERFACE_FSMC opt_disable TFT_INTERFACE_FSMC
opt_enable TFT_INTERFACE_SPI opt_enable TFT_INTERFACE_SPI
exec_test $1 $2 "MKS Robin v2 nano Emulated DOGM SPI" exec_test $1 $2 "MKS Robin v2 nano Emulated DOGM SPI" "$3"
# #
# MKS Robin nano v1.2 LVGL FSMC # MKS Robin nano v1.2 LVGL FSMC
@ -31,7 +31,7 @@ use_example_configs Mks/Robin
opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO
opt_disable TFT_CLASSIC_UI TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240 opt_disable TFT_CLASSIC_UI TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240
opt_enable TFT_LVGL_UI TFT_RES_480x320 opt_enable TFT_LVGL_UI TFT_RES_480x320
exec_test $1 $2 "MKS Robin nano v1.2 LVGL FSMC" exec_test $1 $2 "MKS Robin nano v1.2 LVGL FSMC" "$3"
# #
# MKS Robin v2 nano LVGL SPI # MKS Robin v2 nano LVGL SPI
@ -41,7 +41,7 @@ use_example_configs Mks/Robin
opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2 opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
opt_disable TFT_INTERFACE_FSMC TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240 opt_disable TFT_INTERFACE_FSMC TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240
opt_enable TFT_INTERFACE_SPI TFT_LVGL_UI TFT_RES_480x320 opt_enable TFT_INTERFACE_SPI TFT_LVGL_UI TFT_RES_480x320
exec_test $1 $2 "MKS Robin v2 nano LVGL SPI" exec_test $1 $2 "MKS Robin v2 nano LVGL SPI" "$3"
# #
# MKS Robin v2 nano New Color UI 480x320 SPI # MKS Robin v2 nano New Color UI 480x320 SPI
@ -51,7 +51,7 @@ use_example_configs Mks/Robin
opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2 opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
opt_disable TFT_INTERFACE_FSMC TFT_RES_320x240 opt_disable TFT_INTERFACE_FSMC TFT_RES_320x240
opt_enable TFT_INTERFACE_SPI TFT_RES_480x320 opt_enable TFT_INTERFACE_SPI TFT_RES_480x320
exec_test $1 $2 "MKS Robin v2 nano New Color UI 480x320 SPI" exec_test $1 $2 "MKS Robin v2 nano New Color UI 480x320 SPI" "$3"
# #
# MKS Robin v2 nano LVGL SPI + TMC # MKS Robin v2 nano LVGL SPI + TMC
@ -63,7 +63,7 @@ opt_disable TFT_INTERFACE_FSMC TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240
opt_enable TFT_INTERFACE_SPI TFT_LVGL_UI TFT_RES_480x320 opt_enable TFT_INTERFACE_SPI TFT_LVGL_UI TFT_RES_480x320
opt_set X_DRIVER_TYPE TMC2209 opt_set X_DRIVER_TYPE TMC2209
opt_set Y_DRIVER_TYPE TMC2209 opt_set Y_DRIVER_TYPE TMC2209
exec_test $1 $2 "MKS Robin v2 nano LVGL SPI + TMC" exec_test $1 $2 "MKS Robin v2 nano LVGL SPI + TMC" "$3"
# cleanup # cleanup
restore_configs restore_configs

View File

@ -15,7 +15,7 @@ opt_set X_DRIVER_TYPE TMC2209
opt_set Y_DRIVER_TYPE TMC2130 opt_set Y_DRIVER_TYPE TMC2130
opt_set TEMP_SENSOR_BED 1 opt_set TEMP_SENSOR_BED 1
opt_disable THERMAL_PROTECTION_HOTENDS opt_disable THERMAL_PROTECTION_HOTENDS
exec_test $1 $2 "MKS Robin Pro, TMC Drivers, no thermal protection" exec_test $1 $2 "MKS Robin Pro, TMC Drivers, no thermal protection" "$3"
# cleanup # cleanup
restore_configs restore_configs

View File

@ -7,7 +7,7 @@
set -e set -e
use_example_configs Mks/Robin use_example_configs Mks/Robin
exec_test $1 $2 "MKS Robin base configuration" exec_test $1 $2 "MKS Robin base configuration" "$3"
# cleanup # cleanup
restore_configs restore_configs

View File

@ -42,7 +42,7 @@ opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER LCD_PROGRESS_BAR LCD_PROGRESS_BAR_TE
SLOW_PWM_HEATERS THERMAL_PROTECTION_CHAMBER LIN_ADVANCE EXTRA_LIN_ADVANCE_K \ SLOW_PWM_HEATERS THERMAL_PROTECTION_CHAMBER LIN_ADVANCE EXTRA_LIN_ADVANCE_K \
HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT PINS_DEBUGGING MAX7219_DEBUG M114_DETAIL HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT PINS_DEBUGGING MAX7219_DEBUG M114_DETAIL
opt_add DEBUG_POWER_LOSS_RECOVERY opt_add DEBUG_POWER_LOSS_RECOVERY
exec_test $1 $2 "RAMBO | EXTRUDERS 2 | CHAR LCD + SD | FIX Probe | ABL-Linear | Advanced Pause | PLR | LEDs ..." exec_test $1 $2 "RAMBO | EXTRUDERS 2 | CHAR LCD + SD | FIX Probe | ABL-Linear | Advanced Pause | PLR | LEDs ..." "$3"
# #
# Full size Rambo Dual Endstop CNC # Full size Rambo Dual Endstop CNC
@ -58,7 +58,7 @@ opt_enable USE_XMAX_PLUG USE_YMAX_PLUG USE_ZMAX_PLUG \
S_CURVE_ACCELERATION X_DUAL_STEPPER_DRIVERS X_DUAL_ENDSTOPS Y_DUAL_STEPPER_DRIVERS Y_DUAL_ENDSTOPS \ S_CURVE_ACCELERATION X_DUAL_STEPPER_DRIVERS X_DUAL_ENDSTOPS Y_DUAL_STEPPER_DRIVERS Y_DUAL_ENDSTOPS \
ADAPTIVE_STEP_SMOOTHING CNC_COORDINATE_SYSTEMS GCODE_MOTION_MODES ADAPTIVE_STEP_SMOOTHING CNC_COORDINATE_SYSTEMS GCODE_MOTION_MODES
opt_disable MIN_SOFTWARE_ENDSTOP_Z MAX_SOFTWARE_ENDSTOPS opt_disable MIN_SOFTWARE_ENDSTOP_Z MAX_SOFTWARE_ENDSTOPS
exec_test $1 $2 "Rambo CNC Configuration" exec_test $1 $2 "Rambo CNC Configuration" "$3"
# #
# Rambo heated bed only # Rambo heated bed only
@ -79,7 +79,7 @@ opt_set X_DRIVER_TYPE TMC2130
opt_set Y_DRIVER_TYPE TMC2130 opt_set Y_DRIVER_TYPE TMC2130
opt_set Z_DRIVER_TYPE TMC2130 opt_set Z_DRIVER_TYPE TMC2130
opt_set E0_DRIVER_TYPE TMC2130 opt_set E0_DRIVER_TYPE TMC2130
exec_test $1 $2 "Einsy RAMBo with TMC2130" exec_test $1 $2 "Einsy RAMBo with TMC2130" "$3"
# clean up # clean up
restore_configs restore_configs

View File

@ -15,7 +15,7 @@ opt_enable PIDTEMPBED
opt_set TEMP_SENSOR_BED 1 opt_set TEMP_SENSOR_BED 1
opt_disable THERMAL_PROTECTION_BED opt_disable THERMAL_PROTECTION_BED
opt_set X_DRIVER_TYPE TMC2130 opt_set X_DRIVER_TYPE TMC2130
exec_test $1 $2 "RUMBA32 V1.0 with TMC2130, PID Bed, and bed thermal protection disabled" exec_test $1 $2 "RUMBA32 V1.0 with TMC2130, PID Bed, and bed thermal protection disabled" "$3"
# Build examples # Build examples
restore_configs restore_configs
@ -25,7 +25,7 @@ opt_enable PIDTEMPBED EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPH
opt_set TEMP_SENSOR_BED 1 opt_set TEMP_SENSOR_BED 1
opt_set X_DRIVER_TYPE TMC2130 opt_set X_DRIVER_TYPE TMC2130
opt_set Y_DRIVER_TYPE TMC2208 opt_set Y_DRIVER_TYPE TMC2208
exec_test $1 $2 "RUMBA32 V1.1 with TMC2130, TMC2208, PID Bed, EEPROM settings, and graphic LCD controller" exec_test $1 $2 "RUMBA32 V1.1 with TMC2130, TMC2208, PID Bed, EEPROM settings, and graphic LCD controller" "$3"
# Build examples # Build examples
restore_configs restore_configs
@ -33,7 +33,7 @@ opt_set MOTHERBOARD BOARD_RUMBA32_MKS
opt_set SERIAL_PORT -1 opt_set SERIAL_PORT -1
opt_set X_DRIVER_TYPE TMC2130 opt_set X_DRIVER_TYPE TMC2130
opt_set Y_DRIVER_TYPE TMC2208 opt_set Y_DRIVER_TYPE TMC2208
exec_test $1 $2 "RUMBA32 MKS Default Config with Mixed TMC Drivers" exec_test $1 $2 "RUMBA32 MKS Default Config with Mixed TMC Drivers" "$3"
# cleanup # cleanup
restore_configs restore_configs

View File

@ -10,11 +10,27 @@ set -e
exec_test () { exec_test () {
printf "\n\033[0;32m[Test $2] \033[0m$3...\n" printf "\n\033[0;32m[Test $2] \033[0m$3...\n"
if platformio run --project-dir $1 -e $2 --silent; then # Check to see if we should skip tests
if [[ -n "$4" ]] ; then
if [[ ! "$3" =~ $4 ]] ; then
printf "\033[1;33mSkipped\033[0m\n"
return 0
fi
fi
if [[ -z "$VERBOSE_PLATFORMIO" ]] ; then
silent="--silent"
else
silent=""
fi
if platformio run --project-dir $1 -e $2 $silent; then
printf "\033[0;32mPassed\033[0m\n" printf "\033[0;32mPassed\033[0m\n"
return 0 return 0
else else
if [[ -n $GIT_RESET_HARD ]]; then
git reset --hard HEAD git reset --hard HEAD
else
restore_configs
fi
printf "\033[0;31mFailed!\033[0m\n" printf "\033[0;31mFailed!\033[0m\n"
return 1 return 1
fi fi
@ -30,12 +46,32 @@ if [[ $2 = "ALL" ]]; then
testenv=$(basename $f | cut -d"-" -f1) testenv=$(basename $f | cut -d"-" -f1)
printf "Running \033[0;32m$f\033[0m Tests\n" printf "Running \033[0;32m$f\033[0m Tests\n"
exec_test $1 "$testenv --target clean" "Setup Build Environment" exec_test $1 "$testenv --target clean" "Setup Build Environment"
$f $1 $testenv if [[ $GIT_RESET_HARD == "true" ]]; then
git reset --hard HEAD git reset --hard HEAD
else
restore_configs
fi
done done
else else
exec_test $1 "$2 --target clean" "Setup Build Environment" exec_test $1 "$2 --target clean" "Setup Build Environment"
$2-tests $1 $2 test_name="$3"
# If the test name is 1 or 2 digits, treat it as an index
if [[ "$test_name" =~ ^[0-9][0-9]?$ ]] ; then
# Find the test name that corresponds to that index
test_name="$(cat buildroot/tests/$2-tests | grep -e '^exec_test' | sed -n "$3p" | sed "s/.*\$1 \$2 \"\([^\"]*\).*/\1/g")"
if [[ -z "$test_name" ]] ; then
# Fail if none matches
printf "\033[0;31mCould not find test \033[0m#$3\033[0;31m in \033[0mbuildroot/tests/$2-tests\n"
exit 1
else
printf "\033[0;32mMatching test \033[0m#$3\033[0;32m: '\033[0m$test_name\033[0;32m'\n"
fi
fi
$2-tests $1 $2 "$test_name"
if [[ $GIT_RESET_HARD == "true" ]]; then
git reset --hard HEAD git reset --hard HEAD
else
restore_configs
fi
fi fi
printf "\033[0;32mAll tests completed successfully\033[0m\n" printf "\033[0;32mAll tests completed successfully\033[0m\n"

View File

@ -11,7 +11,7 @@ set -e
# #
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_SANGUINOLOLU_12 opt_set MOTHERBOARD BOARD_SANGUINOLOLU_12
exec_test $1 $2 "Default Configuration" exec_test $1 $2 "Default Configuration" "$3"
# clean up # clean up
restore_configs restore_configs

View File

@ -11,7 +11,7 @@ set -e
# #
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_SANGUINOLOLU_12 opt_set MOTHERBOARD BOARD_SANGUINOLOLU_12
exec_test $1 $2 "Default Configuration" exec_test $1 $2 "Default Configuration" "$3"
# clean up # clean up
restore_configs restore_configs

View File

@ -8,7 +8,7 @@ set -e
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_TEENSY31_32 opt_set MOTHERBOARD BOARD_TEENSY31_32
exec_test $1 $2 "Teensy3.1 with default config" exec_test $1 $2 "Teensy3.1 with default config" "$3"
# #
# Test many features together # Test many features together
@ -27,4 +27,4 @@ opt_enable EEPROM_SETTINGS FILAMENT_WIDTH_SENSOR CALIBRATION_GCODE BAUD_RATE_GCO
HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT
opt_set I2C_SLAVE_ADDRESS 63 opt_set I2C_SLAVE_ADDRESS 63
opt_set GRID_MAX_POINTS_X 16 opt_set GRID_MAX_POINTS_X 16
exec_test $1 $2 "Teensy3.1 with many features" exec_test $1 $2 "Teensy3.1 with many features" "$3"

View File

@ -8,7 +8,7 @@ set -e
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_TEENSY35_36 opt_set MOTHERBOARD BOARD_TEENSY35_36
exec_test $1 $2 "Teensy3.5 with default config" exec_test $1 $2 "Teensy3.5 with default config" "$3"
# #
# Test as many features together as possible # Test as many features together as possible
@ -29,7 +29,7 @@ opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER LCD_INFO_MENU SDSUPPORT
HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT
opt_set I2C_SLAVE_ADDRESS 63 opt_set I2C_SLAVE_ADDRESS 63
opt_set GRID_MAX_POINTS_X 16 opt_set GRID_MAX_POINTS_X 16
exec_test $1 $2 "Teensy3.5 with many features" exec_test $1 $2 "Teensy3.5 with many features" "$3"
# #
# Test a Sled Z Probe with Linear leveling # Test a Sled Z Probe with Linear leveling
@ -37,7 +37,7 @@ exec_test $1 $2 "Teensy3.5 with many features"
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_TEENSY35_36 opt_set MOTHERBOARD BOARD_TEENSY35_36
opt_enable EEPROM_SETTINGS Z_PROBE_SLED Z_SAFE_HOMING AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE GCODE_MACROS opt_enable EEPROM_SETTINGS Z_PROBE_SLED Z_SAFE_HOMING AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE GCODE_MACROS
exec_test $1 $2 "Sled Z Probe with Linear leveling" exec_test $1 $2 "Sled Z Probe with Linear leveling" "$3"
# #
# Test a Servo Probe # Test a Servo Probe
@ -63,7 +63,7 @@ opt_set MOTHERBOARD BOARD_TEENSY35_36
opt_set EXTRUDERS 2 opt_set EXTRUDERS 2
opt_set TEMP_SENSOR_1 1 opt_set TEMP_SENSOR_1 1
opt_enable MAGNETIC_PARKING_EXTRUDER ULTIMAKERCONTROLLER opt_enable MAGNETIC_PARKING_EXTRUDER ULTIMAKERCONTROLLER
exec_test $1 $2 "MAGNETIC_PARKING_EXTRUDER with LCD" exec_test $1 $2 "MAGNETIC_PARKING_EXTRUDER with LCD" "$3"
# #
# Mixing Extruder # Mixing Extruder
@ -72,7 +72,7 @@ restore_configs
opt_set MOTHERBOARD BOARD_TEENSY35_36 opt_set MOTHERBOARD BOARD_TEENSY35_36
opt_enable MIXING_EXTRUDER DIRECT_MIXING_IN_G1 GRADIENT_MIX GRADIENT_VTOOL REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER opt_enable MIXING_EXTRUDER DIRECT_MIXING_IN_G1 GRADIENT_MIX GRADIENT_VTOOL REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
opt_set MIXING_STEPPERS 2 opt_set MIXING_STEPPERS 2
exec_test $1 $2 "Mixing Extruder" exec_test $1 $2 "Mixing Extruder" "$3"
# #
# Test SWITCHING_EXTRUDER # Test SWITCHING_EXTRUDER
@ -97,7 +97,7 @@ opt_set Y_MIN_ENDSTOP_INVERTING true
opt_add X_CS_PIN 46 opt_add X_CS_PIN 46
opt_add Y_CS_PIN 47 opt_add Y_CS_PIN 47
opt_enable USE_ZMIN_PLUG MONITOR_DRIVER_STATUS SENSORLESS_HOMING opt_enable USE_ZMIN_PLUG MONITOR_DRIVER_STATUS SENSORLESS_HOMING
exec_test $1 $2 "Teensy 3.5/3.6 COREXY" exec_test $1 $2 "Teensy 3.5/3.6 COREXY" "$3"
# #
# Enable COREXZ # Enable COREXZ
@ -105,7 +105,7 @@ exec_test $1 $2 "Teensy 3.5/3.6 COREXY"
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_TEENSY35_36 opt_set MOTHERBOARD BOARD_TEENSY35_36
opt_enable COREXZ opt_enable COREXZ
exec_test $1 $2 "Teensy 3.5/3.6 COREXZ" exec_test $1 $2 "Teensy 3.5/3.6 COREXZ" "$3"
# #
# Enable Dual Z with Dual Z endstops # Enable Dual Z with Dual Z endstops
@ -116,7 +116,7 @@ opt_set NUM_Z_STEPPER_DRIVERS 2
opt_enable Z_MULTI_ENDSTOPS USE_XMAX_PLUG opt_enable Z_MULTI_ENDSTOPS USE_XMAX_PLUG
pins_set ramps/RAMPS X_MAX_PIN -1 pins_set ramps/RAMPS X_MAX_PIN -1
opt_add Z2_MAX_PIN 2 opt_add Z2_MAX_PIN 2
exec_test $1 $2 "Dual Z with Dual Z endstops" exec_test $1 $2 "Dual Z with Dual Z endstops" "$3"
# Clean up # Clean up
restore_configs restore_configs

View File

@ -8,7 +8,7 @@ set -e
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_TEENSY41 opt_set MOTHERBOARD BOARD_TEENSY41
exec_test $1 $2 "Teensy4.1 with default config" exec_test $1 $2 "Teensy4.1 with default config" "$3"
# #
# Test as many features together as possible # Test as many features together as possible
@ -30,7 +30,7 @@ opt_enable EXTENSIBLE_UI LCD_INFO_MENU SDSUPPORT SDCARD_SORT_ALPHA \
opt_add EXTUI_EXAMPLE opt_add EXTUI_EXAMPLE
opt_set I2C_SLAVE_ADDRESS 63 opt_set I2C_SLAVE_ADDRESS 63
opt_set GRID_MAX_POINTS_X 16 opt_set GRID_MAX_POINTS_X 16
exec_test $1 $2 "Teensy4.1 with many features" exec_test $1 $2 "Teensy4.1 with many features" "$3"
# #
# Test a Sled Z Probe with Linear leveling # Test a Sled Z Probe with Linear leveling
@ -38,7 +38,7 @@ exec_test $1 $2 "Teensy4.1 with many features"
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_TEENSY41 opt_set MOTHERBOARD BOARD_TEENSY41
opt_enable EEPROM_SETTINGS Z_PROBE_SLED Z_SAFE_HOMING AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE GCODE_MACROS opt_enable EEPROM_SETTINGS Z_PROBE_SLED Z_SAFE_HOMING AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE GCODE_MACROS
exec_test $1 $2 "Sled Z Probe with Linear leveling" exec_test $1 $2 "Sled Z Probe with Linear leveling" "$3"
# #
# Test a Servo Probe # Test a Servo Probe
@ -65,7 +65,7 @@ opt_set EXTRUDERS 2
opt_set TEMP_SENSOR_1 1 opt_set TEMP_SENSOR_1 1
opt_set SERIAL_PORT_2 -2 opt_set SERIAL_PORT_2 -2
opt_enable EEPROM_SETTINGS MAGNETIC_PARKING_EXTRUDER opt_enable EEPROM_SETTINGS MAGNETIC_PARKING_EXTRUDER
exec_test $1 $2 "Ethernet, EEPROM, Magnetic Parking Extruder, No LCD" exec_test $1 $2 "Ethernet, EEPROM, Magnetic Parking Extruder, No LCD" "$3"
# #
# Mixing Extruder # Mixing Extruder
@ -74,7 +74,7 @@ restore_configs
opt_set MOTHERBOARD BOARD_TEENSY41 opt_set MOTHERBOARD BOARD_TEENSY41
opt_enable MIXING_EXTRUDER DIRECT_MIXING_IN_G1 GRADIENT_MIX GRADIENT_VTOOL opt_enable MIXING_EXTRUDER DIRECT_MIXING_IN_G1 GRADIENT_MIX GRADIENT_VTOOL
opt_set MIXING_STEPPERS 2 opt_set MIXING_STEPPERS 2
exec_test $1 $2 "Mixing Extruder" exec_test $1 $2 "Mixing Extruder" "$3"
# #
# Test SWITCHING_EXTRUDER # Test SWITCHING_EXTRUDER
@ -99,7 +99,7 @@ opt_set Y_MIN_ENDSTOP_INVERTING true
opt_add X_CS_PIN 46 opt_add X_CS_PIN 46
opt_add Y_CS_PIN 47 opt_add Y_CS_PIN 47
opt_enable USE_ZMIN_PLUG MONITOR_DRIVER_STATUS SENSORLESS_HOMING opt_enable USE_ZMIN_PLUG MONITOR_DRIVER_STATUS SENSORLESS_HOMING
exec_test $1 $2 "Teensy 4.0/4.1 COREXY" exec_test $1 $2 "Teensy 4.0/4.1 COREXY" "$3"
# #
# Enable COREXZ # Enable COREXZ
@ -107,7 +107,7 @@ exec_test $1 $2 "Teensy 4.0/4.1 COREXY"
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_TEENSY41 opt_set MOTHERBOARD BOARD_TEENSY41
opt_enable COREXZ opt_enable COREXZ
exec_test $1 $2 "Teensy 4.0/4.1 COREXZ" exec_test $1 $2 "Teensy 4.0/4.1 COREXZ" "$3"
# #
# Enable Dual Z with Dual Z endstops # Enable Dual Z with Dual Z endstops
@ -118,7 +118,7 @@ opt_enable Z_MULTI_ENDSTOPS USE_XMAX_PLUG
opt_set NUM_Z_STEPPER_DRIVERS 2 opt_set NUM_Z_STEPPER_DRIVERS 2
pins_set ramps/RAMPS X_MAX_PIN -1 pins_set ramps/RAMPS X_MAX_PIN -1
opt_add Z2_MAX_PIN 2 opt_add Z2_MAX_PIN 2
exec_test $1 $2 "Dual Z with Dual Z endstops" exec_test $1 $2 "Dual Z with Dual Z endstops" "$3"
# Clean up # Clean up
restore_configs restore_configs

19
docker-compose.yml Normal file
View File

@ -0,0 +1,19 @@
version: "3.8"
services:
# The main image: this doesn't run any particular command, but is mainly used
# for running tests locally
marlin:
image: marlin-dev
build:
dockerfile: Dockerfile
context: docker
working_dir: /code
volumes:
- .:/code
- platformio-cache:/root/.platformio
volumes:
# This volume holds installed libraries for PlatformIO. If this is deleted you
# will have to download all the dependencies again, which can be a very slow
# process
platformio-cache:

7
docker/Dockerfile Normal file
View File

@ -0,0 +1,7 @@
FROM python:3.9.0-buster
RUN pip install -U https://github.com/platformio/platformio-core/archive/develop.zip
RUN platformio update
# To get the test platforms
RUN pip install PyYaml
#ENV PATH /code/buildroot/bin/:/code/buildroot/tests/:${PATH}

12
get_test_targets.py Normal file
View File

@ -0,0 +1,12 @@
#!/usr/bin/env python
"""
Extract the builds used in Github CI, so that we can run them locally
"""
import yaml
with open('.github/workflows/test-builds.yml') as f:
github_configuration = yaml.safe_load(f)
test_platforms = github_configuration\
['jobs']['test_builds']['strategy']['matrix']['test-platform']
print(' '.join(test_platforms))