bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Local testing via Makefile & Docker (#19981)

Browse Source
This commit is contained in:
Costas Basdekis 2020-11-18 02:04:28 +00:00 committed by Scott Lahteine
parent 180fe914b6
commit 1c81a126c5
59 changed files with 418 additions and 226 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
.github/workflows/test-builds.yml vendored
View File

@ -119,8 +119,4 @@ jobs:
- name: Run ${{ matrix.test-platform }} Tests - name: Run ${{ matrix.test-platform }} Tests
run: | run: |
# Inline tests script make tests-single-ci TEST_TARGET=${{ matrix.test-platform }}
chmod +x buildroot/bin/*
chmod +x buildroot/tests/*
export PATH=./buildroot/bin/:./buildroot/tests/:${PATH}
run_tests . ${{ matrix.test-platform }}

56
Makefile Normal file
View File

@ -0,0 +1,56 @@
help:
@echo "Tasks for local development:"
@echo "* tests-single-ci: Run a single test from inside the CI"
@echo "* tests-single-local: Run a single test locally"
@echo "* tests-single-local-docker: Run a single test locally, using docker-compose"
@echo "* tests-all-local: Run all tests locally"
@echo "* tests-all-local-docker: Run all tests locally, using docker-compose"
@echo "* setup-local-docker: Setup local docker-compose"
@echo ""
@echo "Options for testing:"
@echo " TEST_TARGET Set when running tests-single-*, to select the"
@echo " test. If you set it to ALL it will run all "
@echo " tests, but some of them are broken: use "
@echo " tests-all-* instead to run only the ones that "
@echo " run on GitHub CI"
@echo " ONLY_TEST Limit tests to only those that contain this, or"
@echo " the index of the test (1-based)"
@echo " VERBOSE_PLATFORMIO If you want the full PIO output, set any value"
@echo " GIT_RESET_HARD Used by CI: reset all local changes. WARNING:"
@echo " THIS WILL UNDO ANY CHANGES YOU'VE MADE!"
.PHONY: help
tests-single-ci:
export GIT_RESET_HARD=true
$(MAKE) tests-single-local TEST_TARGET=$(TEST_TARGET)
.PHONY: tests-single-ci
tests-single-local:
@if ! test -n "$(TEST_TARGET)" ; then echo "***ERROR*** Set TEST_TARGET=<your-module> or use make tests-all-local" ; return 1; fi
chmod +x buildroot/bin/*
chmod +x buildroot/tests/*
export PATH=./buildroot/bin/:./buildroot/tests/:${PATH} \
&& export VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) \
&& run_tests . $(TEST_TARGET) "$(ONLY_TEST)"
.PHONY: tests-single-local
tests-single-local-docker:
@if ! test -n "$(TEST_TARGET)" ; then echo "***ERROR*** Set TEST_TARGET=<your-module> or use make tests-all-local-docker" ; return 1; fi
docker-compose run --rm marlin $(MAKE) tests-single-local TEST_TARGET=$(TEST_TARGET) VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) GIT_RESET_HARD=$(GIT_RESET_HARD) ONLY_TEST="$(ONLY_TEST)"
.PHONY: tests-single-local-docker
tests-all-local:
chmod +x buildroot/bin/*
chmod +x buildroot/tests/*
export PATH=./buildroot/bin/:./buildroot/tests/:${PATH} \
&& export VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) \
&& for TEST_TARGET in $$(./get_test_targets.py) ; do echo "Running tests for $$TEST_TARGET" ; run_tests . $$TEST_TARGET ; done
.PHONY: tests-all-local
tests-all-local-docker:
docker-compose run --rm marlin $(MAKE) tests-all-local VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) GIT_RESET_HARD=$(GIT_RESET_HARD)
.PHONY: tests-all-local-docker
setup-local-docker:
docker-compose build
.PHONY: setup-local-docker

5
README.md
View File

@ -110,6 +110,11 @@ Proposed patches should be submitted as a Pull Request against the ([bugfix-2.0.
- This branch is for fixing bugs and integrating any new features for the duration of the Marlin 2.0.x life-cycle. - This branch is for fixing bugs and integrating any new features for the duration of the Marlin 2.0.x life-cycle.
- Follow the [Coding Standards](https://marlinfw.org/docs/development/coding_standards.html) to gain points with the maintainers. - Follow the [Coding Standards](https://marlinfw.org/docs/development/coding_standards.html) to gain points with the maintainers.
- Please submit Feature Requests and Bug Reports to the [Issue Queue](https://github.com/MarlinFirmware/Marlin/issues/new/choose). Support resources are also listed there. - Please submit Feature Requests and Bug Reports to the [Issue Queue](https://github.com/MarlinFirmware/Marlin/issues/new/choose). Support resources are also listed there.
- Whenever you add new features, be sure to add tests to `buildroot/tests` and then run your tests locally, if possible.
- It's optional: Running all the tests on Windows might take a long time, and they will run anyway on GitHub.
- If you're running the tests on Linux (or on WSL with the code on a Linux volume) the speed is much faster.
- You can use `make tests-all-local` or `make tests-single-local TEST_TARGET=...`.
- If you prefer Docker you can use `make tests-all-local-docker` or `make tests-all-local-docker TEST_TARGET=...`.
### [RepRap.org Wiki Page](https://reprap.org/wiki/Marlin) ### [RepRap.org Wiki Page](https://reprap.org/wiki/Marlin)

169
buildroot/share/git/mftest
View File

@ -7,7 +7,33 @@
# #
MFINFO=$(mfinfo) || exit 1 MFINFO=$(mfinfo) || exit 1
[[ -d Marlin/src ]] || { echo "Please 'cd' up to repo root." ; exit 1 ; } [[ -d Marlin/src ]] || { echo "Please 'cd' to the Marlin repo root." ; exit 1 ; }
perror() { echo -e "$0: \033[0;31m$1 -- $2\033[0m" ; }
errout() { echo -e "\033[0;31m$1\033[0m" ; }
bugout() { ((DEBUG)) && echo -e "\033[0;32m$1\033[0m" ; }
usage() {
echo "
Usage: mftest [-t|--env=<env>] [-n|--num=<num>] [-m|--make] [-y|--build=<Y|n>]
mftest [-a|--autobuild]
mftest [-r|--rebuild]
mftest [-u|--autoupload] [-n|--num=<num>]
OPTIONS
-t --env The environment of the test to apply / run. (As named in platformio.ini.)
-n --num The index of the test to run. (In *-tests file order.)
-m --make Use the make / Docker method for the build.
-y --build Skip 'Do you want to build this test?' and assume YES.
-h --help Print this help.
-a --autobuild PIO Build using the MOTHERBOARD environment.
-u --autoupload PIO Upload using the MOTHERBOARD environment.
-v --verbose Extra output for debugging.
env shortcuts: tree due esp lin lpc|lpc8 lpc9 m128 m256|mega stm|f1 f4 f7 s6 teensy|t31|t32 t35|t36 t40|t41
"
}
TESTPATH=buildroot/tests TESTPATH=buildroot/tests
@ -22,12 +48,68 @@ ISCMD='^(restore|opt|exec|use|pins|env)_'
ISEXEC='^exec_' ISEXEC='^exec_'
ISCONT='\\ *$' ISCONT='\\ *$'
# Get the environment and test number from the command # Get environment, test number, etc. from the command
TESTENV=${1:-'-'} TESTENV='-'
CHOICE=${2:-0} CHOICE=0
AUTOENV=0 DEBUG=0
while getopts 'abhmruvyn:t:-:' OFLAG; do
case "${OFLAG}" in
a) AUTO_BUILD=1 ; bugout "Auto-Build target..." ;;
h) EXIT_USAGE=1 ;;
m) USE_MAKE=1 ; bugout "Using make with Docker..." ;;
n) case "$OPTARG" in
*[!0-9]*) perror "option requires a number" $OFLAG ; EXIT_USAGE=1 ;;
*) CHOICE="$OPTARG" ; bugout "Got a number: $CHOICE" ;;
esac
;;
r) REBUILD=1 ; bugout "Rebuilding previous..." ;;
t) TESTENV="$OPTARG" ; bugout "Got a target: $TESTENV" ;;
u) AUTO_BUILD=2 ; bugout "Auto-Upload target..." ;;
v) DEBUG=1 ; bugout "Debug ON" ;;
y) BUILD_YES='Y' ; bugout "Build will initiate..." ;;
-) IFS="=" read -r ONAM OVAL <<< "$OPTARG"
case "$ONAM" in
help) [[ -z "$OVAL" ]] || perror "option can't take value $OVAL" $ONAM ; EXIT_USAGE=1 ;;
autobuild) AUTO_BUILD=1 ; bugout "Auto-Build target..." ;;
autoupload) AUTO_BUILD=2 ; bugout "Auto-Upload target..." ;;
env) case "$OVAL" in
'') perror "option requires a value" $ONAM ; EXIT_USAGE=1 ;;
*) TESTENV="$OVAL" ; bugout "Got a target: $TESTENV" ;;
esac
;;
num) case "$OVAL" in
[0-9]+) CHOICE="$OVAL" ; bugout "Got a number: $CHOICE" ;;
*) perror "option requires a value" $ONAM ; EXIT_USAGE=1 ;;
esac
;;
rebuild) REBUILD=1 ; bugout "Rebuilding previous..." ;;
make) USE_MAKE=1 ; bugout "Using make with Docker..." ;;
debug|verbose) DEBUG=1 ; bugout "Debug ON" ;;
build) case "$OVAL" in
''|y|yes) BUILD_YES='Y' ;;
n|no) BUILD_YES='N' ;;
*) perror "option value must be y, n, yes, or no" $ONAM ; EXIT_USAGE=1 ;;
esac
bugout "Build will initiate? ($BUILD_YES)"
;;
*) perror "Unknown flag" "$OPTARG" ; EXIT_USAGE=1 ;;
esac
;;
esac
done
((EXIT_USAGE)) && { usage ; exit 1 ; }
if ((REBUILD)); then
bugout "Rebuilding previous..."
# Build with the last-built env
[[ -f "$STATE_FILE" ]] || { errout "No previous (-r) build state found." ; exit 1 ; }
read TESTENV <"$STATE_FILE"
pio run -d . -e $TESTENV
exit
fi
# Allow shorthand for test name
case $TESTENV in case $TESTENV in
tree) pio run -d . -e include_tree ; exit 1 ;; tree) pio run -d . -e include_tree ; exit 1 ;;
due) TESTENV='DUE' ;; due) TESTENV='DUE' ;;
@ -50,42 +132,28 @@ case $TESTENV in
t36) TESTENV='teensy35' ;; t36) TESTENV='teensy35' ;;
t40) TESTENV='teensy41' ;; t40) TESTENV='teensy41' ;;
t41) TESTENV='teensy41' ;; t41) TESTENV='teensy41' ;;
esac
-h|--help) echo -e "$(basename $0) : Marlin Firmware test, build, and upload\n" if ((AUTO_BUILD)); then
echo "Usage: $(basename $0) ................. Select env and test to apply / run" #
echo " $(basename $0) [-y] env ........ Select a test for env to apply / run" # List environments that apply to the current MOTHERBOARD.
echo " $(basename $0) [-y] env test ... Apply / run the specified env test" #
echo " $(basename $0) -b [variant] .... Auto-build the specified variant" echo ; echo -n "Auto " ; ((AUTO_BUILD == 2)) && echo "Upload..." || echo "Build..."
echo " $(basename $0) -u [variant] .... Auto-build and upload the specified variant" MB=$( grep -E "^\s*#define MOTHERBOARD" Marlin/Configuration.h | awk '{ print $3 }' | $SED 's/BOARD_//' )
echo
echo "env shortcuts: tree due esp lin lpc|lpc8 lpc9 m128 m256|mega stm|f1 f4 f7 s6 teensy|t31|t32 t35|t36 t40|t41"
exit
;;
# Build with the last-built env
-r) [[ -f "$STATE_FILE" ]] || { echo "No previous (-r) build state found." ; exit 1 ; }
read TESTENV <"$STATE_FILE"
pio run -d . -e $TESTENV
exit
;;
-[bu]) MB=$( grep -E "^\s*#define MOTHERBOARD" Marlin/Configuration.h | awk '{ print $3 }' | $SED 's/BOARD_//' )
[[ -z $MB ]] && { echo "Error - Can't read MOTHERBOARD setting." ; exit 1 ; } [[ -z $MB ]] && { echo "Error - Can't read MOTHERBOARD setting." ; exit 1 ; }
BLINE=$( grep -E "define\s+BOARD_$MB\b" Marlin/src/core/boards.h ) BLINE=$( grep -E "define\s+BOARD_$MB\b" Marlin/src/core/boards.h )
BNUM=$( $SED -E 's/^.+BOARD_[^ ]+ +([0-9]+).+$/\1/' <<<"$BLINE" ) BNUM=$( $SED -E 's/^.+BOARD_[^ ]+ +([0-9]+).+$/\1/' <<<"$BLINE" )
BDESC=$( $SED -E 's/^.+\/\/ *(.+)$/\1/' <<<"$BLINE" ) BDESC=$( $SED -E 's/^.+\/\/ *(.+)$/\1/' <<<"$BLINE" )
[[ -z $BNUM ]] && { echo "Error - Can't find $MB in boards list." ; exit 1 ; } [[ -z $BNUM ]] && { echo "Error - Can't find $MB in boards list." ; exit 1 ; }
readarray -t ENVS <<< $( grep -EA1 "MB\(.*\b$MB\b.*\)" Marlin/src/pins/pins.h | grep -E '#include.+//.+env:.+' | grep -oE 'env:[^ ]+' | $SED -E 's/env://' ) ENVS=( $( grep -EA1 "MB\(.*\b$MB\b.*\)" Marlin/src/pins/pins.h | grep -E '#include.+//.+env:[^ ]+' | grep -oE 'env:[^ ]+' | $SED -E 's/env://' ) )
[[ -z $ENVS ]] && { echo "Error - Can't find target(s) for $MB ($BNUM)." ; exit 1 ; } [[ -z $ENVS ]] && { errout "Error - Can't find target(s) for $MB ($BNUM)." ; exit 1 ; }
ECOUNT=${#ENVS[*]} ECOUNT=${#ENVS[*]}
if [[ $ECOUNT == 1 ]]; then if [[ $ECOUNT == 1 ]]; then
TARGET=$ENVS TARGET=$ENVS
else else
if [[ $CHOICE == 0 ]]; then if [[ $CHOICE == 0 ]]; then
#
# List env names and numbers. Get selection. # List env names and numbers. Get selection.
#
echo "Available targets for \"$BDESC\" | $MB ($BNUM):" echo "Available targets for \"$BDESC\" | $MB ($BNUM):"
IND=0 ; for ENV in "${ENVS[@]}"; do let IND++ ; echo " $IND) $ENV" ; done IND=0 ; for ENV in "${ENVS[@]}"; do let IND++ ; echo " $IND) $ENV" ; done
@ -96,7 +164,7 @@ case $TESTENV in
read -p "Select a target for '$MB' (1-$ECOUNT) : " CHOICE read -p "Select a target for '$MB' (1-$ECOUNT) : " CHOICE
[[ -z "$CHOICE" ]] && { echo '(canceled)' ; exit 1 ; } [[ -z "$CHOICE" ]] && { echo '(canceled)' ; exit 1 ; }
[[ $CHOICE =~ $ISNUM ]] && ((CHOICE >= 1 && CHOICE <= ECOUNT)) && break [[ $CHOICE =~ $ISNUM ]] && ((CHOICE >= 1 && CHOICE <= ECOUNT)) && break
echo ">>> Invalid environment choice '$CHOICE'." errout ">>> Invalid environment choice '$CHOICE'."
done done
echo echo
fi fi
@ -110,22 +178,15 @@ case $TESTENV in
echo "$TARGET" >"$STATE_FILE" echo "$TARGET" >"$STATE_FILE"
if [[ $TESTENV == "-u" ]]; then if ((AUTO_BUILD == 2)); then
echo "Build/Uploading environment $TARGET for board $MB ($BNUM)..." ; echo echo "Uploading environment $TARGET for board $MB ($BNUM)..." ; echo
pio run -t upload -e $TARGET pio run -t upload -e $TARGET
else else
echo "Building environment $TARGET for board $MB ($BNUM)..." ; echo echo "Building environment $TARGET for board $MB ($BNUM)..." ; echo
pio run -e $TARGET pio run -e $TARGET
fi fi
exit exit
;; fi
# The -y flag may come first
-y) TESTENV=${2:-'-'} ; CHOICE=${3:-0} ;;
-[a-z]) echo "Unknown flag $TESTENV" ; exit 1 ;;
-) ;;
esac
# #
# List available tests and ask for selection # List available tests and ask for selection
@ -148,20 +209,20 @@ if [[ $TESTENV == '-' ]]; then
for (( ; ; )) for (( ; ; ))
do do
read -p "Select a test to apply (1-$IND) : " NAMEIND read -p "Select a test to apply (1-$IND) : " NAMEIND
[[ -z "$NAMEIND" ]] && { echo '(canceled)' ; exit 1 ; } [[ -z "$NAMEIND" ]] && { errout "(canceled)" ; exit 1 ; }
[[ $NAMEIND =~ $ISNUM ]] && ((NAMEIND >= 1 && NAMEIND <= IND)) && { TESTENV=${NAMES[$NAMEIND-1]} ; echo ; break ; } [[ $NAMEIND =~ $ISNUM ]] && ((NAMEIND >= 1 && NAMEIND <= IND)) && { TESTENV=${NAMES[$NAMEIND-1]} ; echo ; break ; }
echo "Invalid selection." errout "Invalid selection."
done done
fi fi
# Get the contents of the test file # Get the contents of the test file
OUT=$( cat $TESTPATH/$TESTENV-tests 2>/dev/null ) || { echo "Can't find test '$TESTENV'." ; exit 1 ; } OUT=$( cat $TESTPATH/$TESTENV-tests 2>/dev/null ) || { errout "Can't find test '$TESTENV'." ; exit 1 ; }
# Count up the number of tests # Count up the number of tests
TESTCOUNT=$( awk "/$ISEXEC/{a++}END{print a}" <<<"$OUT" ) TESTCOUNT=$( awk "/$ISEXEC/{a++}END{print a}" <<<"$OUT" )
# User entered a number? # User entered a number?
(( CHOICE && CHOICE > TESTCOUNT )) && { echo "Invalid test selection '$CHOICE' (1-$TESTCOUNT)." ; exit 1 ; } (( CHOICE && CHOICE > TESTCOUNT )) && { errout "Invalid test selection '$CHOICE' (1-$TESTCOUNT)." ; exit 1 ; }
if [[ $CHOICE == 0 ]]; then if [[ $CHOICE == 0 ]]; then
# #
@ -172,7 +233,7 @@ if [[ $CHOICE == 0 ]]; then
while IFS= read -r LINE while IFS= read -r LINE
do do
if [[ $LINE =~ $ISEXEC ]]; then if [[ $LINE =~ $ISEXEC ]]; then
DESC=$( "$SED" -E 's/^.+"(.*)".*$/\1/g' <<<"$LINE" ) DESC=$( "$SED" -E 's/^exec_test \$1 \$2 "([^"]+)".*$/\1/g' <<<"$LINE" )
(( ++IND < 10 )) && echo -n " " (( ++IND < 10 )) && echo -n " "
echo " $IND) $DESC" echo " $IND) $DESC"
fi fi
@ -183,9 +244,9 @@ if [[ $CHOICE == 0 ]]; then
for (( ; ; )) for (( ; ; ))
do do
read -p "Select a '$TESTENV' test (1-$TESTCOUNT) : " CHOICE read -p "Select a '$TESTENV' test (1-$TESTCOUNT) : " CHOICE
[[ -z "$CHOICE" ]] && { echo '(canceled)' ; exit 1 ; } [[ -z "$CHOICE" ]] && { errout "(canceled)" ; exit 1 ; }
[[ $CHOICE =~ $ISNUM ]] && ((CHOICE >= 1 && CHOICE <= TESTCOUNT)) && break [[ $CHOICE =~ $ISNUM ]] && ((CHOICE >= 1 && CHOICE <= TESTCOUNT)) && break
echo ">>> Invalid test selection '$CHOICE'." errout ">>> Invalid test selection '$CHOICE'."
done done
fi fi
fi fi
@ -193,6 +254,7 @@ fi
# #
# Run the specified test lines # Run the specified test lines
# #
echo -ne "\033[0;33m"
echo "$OUT" | { echo "$OUT" | {
IND=0 IND=0
GOTX=0 GOTX=0
@ -210,27 +272,26 @@ echo "$OUT" | {
} }
((IND == CHOICE)) && { ((IND == CHOICE)) && {
GOTX=1 GOTX=1
[[ $CMD == "" ]] && CMD="$LINE" || CMD=$( echo -e "$CMD$LINE" | $SED -e 's/\\//g' ) [[ $CMD == "" ]] && CMD="$LINE" || CMD=$( echo -e "$CMD$LINE" | $SED -e 's/\\//g' | $SED -E 's/ +/ /g' )
[[ $LINE =~ $ISCONT ]] || { echo $CMD ; eval "$CMD" ; CMD="" ; } [[ $LINE =~ $ISCONT ]] || { echo "$CMD" ; eval "$CMD" ; CMD="" ; }
} }
fi fi
fi fi
done done
} }
echo -ne "\033[0m"
# Make clear it's a TEST # Make clear it's a TEST
opt_set CUSTOM_MACHINE_NAME "\"$TESTENV-tests ($CHOICE)\"" opt_set CUSTOM_MACHINE_NAME "\"$TESTENV-tests ($CHOICE)\""
# Get a -y parameter the lazy way
[[ "$2" == "-y" || "$3" == "-y" ]] && BUILD_YES='Y'
# Build the test too? # Build the test too?
if [[ $BUILD_YES != 'Y' ]]; then if [[ -z "$BUILD_YES" ]]; then
echo echo
read -p "Build $TESTENV test #$CHOICE (y/N) ? " BUILD_YES read -p "Build $TESTENV test #$CHOICE (y/N) ? " BUILD_YES
fi fi
[[ $BUILD_YES == 'Y' || $BUILD_YES == 'Yes' ]] && { [[ $BUILD_YES == 'Y' || $BUILD_YES == 'Yes' ]] && {
pio run -d . -e $TESTENV ((USE_MAKE)) && make tests-single-local TEST_TARGET=$TESTENV ONLY_TEST=$CHOICE
((USE_MAKE)) || pio run -d . -e $TESTENV
echo "$TESTENV" >"$STATE_FILE" echo "$TESTENV" >"$STATE_FILE"
} }

2
buildroot/tests/ARMED-tests
View File

@ -13,7 +13,7 @@ restore_configs
use_example_configs ArmEd use_example_configs ArmEd
opt_set X_DRIVER_TYPE TMC2130 opt_set X_DRIVER_TYPE TMC2130
opt_set Y_DRIVER_TYPE TMC2208 opt_set Y_DRIVER_TYPE TMC2208
exec_test $1 $2 "ArmEd Example Configuration with mixed TMC Drivers" exec_test $1 $2 "ArmEd Example Configuration with mixed TMC Drivers" "$3"
# clean up # clean up
restore_configs restore_configs

2
buildroot/tests/BIGTREE_BTT002-tests
View File

@ -14,7 +14,7 @@ opt_set MOTHERBOARD BOARD_BTT_BTT002_V1_0
opt_set SERIAL_PORT 1 opt_set SERIAL_PORT 1
opt_set X_DRIVER_TYPE TMC2209 opt_set X_DRIVER_TYPE TMC2209
opt_set Y_DRIVER_TYPE TMC2130 opt_set Y_DRIVER_TYPE TMC2130
exec_test $1 $2 "BigTreeTech BTT002 Default Configuration plus TMC steppers" exec_test $1 $2 "BigTreeTech BTT002 Default Configuration plus TMC steppers" "$3"
# clean up # clean up
restore_configs restore_configs

4
buildroot/tests/BIGTREE_GTR_V1_0-tests
View File

@ -37,7 +37,7 @@ opt_set FIL_RUNOUT4_STATE HIGH
opt_enable FIL_RUNOUT4_PULL opt_enable FIL_RUNOUT4_PULL
opt_set FIL_RUNOUT8_STATE HIGH opt_set FIL_RUNOUT8_STATE HIGH
opt_enable FIL_RUNOUT8_PULL opt_enable FIL_RUNOUT8_PULL
exec_test $1 $2 "BigTreeTech GTR 8 Extruders with Auto-Fan, Mixed TMC Drivers, and Runout Sensors with distinct states" exec_test $1 $2 "BigTreeTech GTR 8 Extruders with Auto-Fan, Mixed TMC Drivers, and Runout Sensors with distinct states" "$3"
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_BTT_GTR_V1_0 opt_set MOTHERBOARD BOARD_BTT_GTR_V1_0
@ -53,7 +53,7 @@ opt_set DEFAULT_Kp_LIST "{ 22.2, 20.0, 21.0, 19.0, 18.0, 17.0 }"
opt_set DEFAULT_Ki_LIST "{ 1.08 }" opt_set DEFAULT_Ki_LIST "{ 1.08 }"
opt_set DEFAULT_Kd_LIST "{ 114.0, 112.0, 110.0, 108.0 }" opt_set DEFAULT_Kd_LIST "{ 114.0, 112.0, 110.0, 108.0 }"
opt_enable TOOLCHANGE_FILAMENT_SWAP TOOLCHANGE_MIGRATION_FEATURE TOOLCHANGE_FS_INIT_BEFORE_SWAP TOOLCHANGE_FS_PRIME_FIRST_USED PID_PARAMS_PER_HOTEND opt_enable TOOLCHANGE_FILAMENT_SWAP TOOLCHANGE_MIGRATION_FEATURE TOOLCHANGE_FS_INIT_BEFORE_SWAP TOOLCHANGE_FS_PRIME_FIRST_USED PID_PARAMS_PER_HOTEND
exec_test $1 $2 "BigTreeTech GTR 6 Extruders Triple Z" exec_test $1 $2 "BigTreeTech GTR 6 Extruders Triple Z" "$3"
# clean up # clean up
restore_configs restore_configs

4
buildroot/tests/BIGTREE_SKR_PRO-tests
View File

@ -12,7 +12,7 @@ set -e
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_BTT_SKR_PRO_V1_1 opt_set MOTHERBOARD BOARD_BTT_SKR_PRO_V1_1
opt_set SERIAL_PORT 1 opt_set SERIAL_PORT 1
exec_test $1 $2 "BigTreeTech SKR Pro Default Configuration" exec_test $1 $2 "BigTreeTech SKR Pro Default Configuration" "$3"
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_BTT_SKR_PRO_V1_1 opt_set MOTHERBOARD BOARD_BTT_SKR_PRO_V1_1
@ -26,7 +26,7 @@ opt_set E2_AUTO_FAN_PIN PC12
opt_set X_DRIVER_TYPE TMC2209 opt_set X_DRIVER_TYPE TMC2209
opt_set Y_DRIVER_TYPE TMC2130 opt_set Y_DRIVER_TYPE TMC2130
opt_enable BLTOUCH EEPROM_SETTINGS AUTO_BED_LEVELING_3POINT Z_SAFE_HOMING opt_enable BLTOUCH EEPROM_SETTINGS AUTO_BED_LEVELING_3POINT Z_SAFE_HOMING
exec_test $1 $2 "BigTreeTech SKR Pro 3 Extruders, Auto-Fan, BLTOUCH, mixed TMC drivers" exec_test $1 $2 "BigTreeTech SKR Pro 3 Extruders, Auto-Fan, BLTOUCH, mixed TMC drivers" "$3"
# clean up # clean up
restore_configs restore_configs

6
buildroot/tests/DUE-tests
View File

@ -33,7 +33,7 @@ opt_set EXTRUDER_AUTO_FAN_SPEED 100
opt_set TEMP_SENSOR_CHAMBER 3 opt_set TEMP_SENSOR_CHAMBER 3
opt_add TEMP_CHAMBER_PIN 6 opt_add TEMP_CHAMBER_PIN 6
opt_set HEATER_CHAMBER_PIN 45 opt_set HEATER_CHAMBER_PIN 45
exec_test $1 $2 "RAMPS4DUE_EFB with ABL (Bilinear), ExtUI, S-Curve, many options." exec_test $1 $2 "RAMPS4DUE_EFB with ABL (Bilinear), ExtUI, S-Curve, many options." "$3"
# #
# RADDS with BLTouch, ABL(B), 3 x Z auto-align # RADDS with BLTouch, ABL(B), 3 x Z auto-align
@ -51,7 +51,7 @@ opt_add Z2_MAX_PIN 2
opt_add Z3_MAX_PIN 3 opt_add Z3_MAX_PIN 3
pins_set ramps/RAMPS X_MAX_PIN -1 pins_set ramps/RAMPS X_MAX_PIN -1
pins_set ramps/RAMPS Y_MAX_PIN -1 pins_set ramps/RAMPS Y_MAX_PIN -1
exec_test $1 $2 "RADDS with ABL (Bilinear), Triple Z Axis, Z_STEPPER_AUTO_ALIGN" exec_test $1 $2 "RADDS with ABL (Bilinear), Triple Z Axis, Z_STEPPER_AUTO_ALIGN" "$3"
# #
# Test SWITCHING_EXTRUDER # Test SWITCHING_EXTRUDER
@ -62,4 +62,4 @@ opt_set MOTHERBOARD BOARD_RAMPS4DUE_EEF
opt_set EXTRUDERS 2 opt_set EXTRUDERS 2
opt_set NUM_SERVOS 1 opt_set NUM_SERVOS 1
opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER BEEP_ON_FEEDRATE_CHANGE POWER_LOSS_RECOVERY opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER BEEP_ON_FEEDRATE_CHANGE POWER_LOSS_RECOVERY
exec_test $1 $2 "RAMPS4DUE_EEF with SWITCHING_EXTRUDER, POWER_LOSS_RECOVERY" exec_test $1 $2 "RAMPS4DUE_EEF with SWITCHING_EXTRUDER, POWER_LOSS_RECOVERY" "$3"

4
buildroot/tests/DUE_archim-tests
View File

@ -10,12 +10,12 @@ set -e
# Test Archim 1 # Test Archim 1
# #
use_example_configs UltiMachine/Archim1 use_example_configs UltiMachine/Archim1
exec_test $1 $2 "Archim 1 base configuration" exec_test $1 $2 "Archim 1 base configuration" "$3"
# #
# Test Archim 2 # Test Archim 2
# #
use_example_configs UltiMachine/Archim2 use_example_configs UltiMachine/Archim2
exec_test $1 $2 "Archim 2 base configuration" exec_test $1 $2 "Archim 2 base configuration" "$3"
restore_configs restore_configs

2
buildroot/tests/FLYF407ZG-tests
View File

@ -12,7 +12,7 @@ opt_set MOTHERBOARD BOARD_FLYF407ZG
opt_set SERIAL_PORT -1 opt_set SERIAL_PORT -1
opt_set X_DRIVER_TYPE TMC2208 opt_set X_DRIVER_TYPE TMC2208
opt_set Y_DRIVER_TYPE TMC2130 opt_set Y_DRIVER_TYPE TMC2130
exec_test $1 $2 "FLYF407ZG Default Config with mixed TMC Drivers" exec_test $1 $2 "FLYF407ZG Default Config with mixed TMC Drivers" "$3"
# cleanup # cleanup
restore_configs restore_configs

2
buildroot/tests/FYSETC_F6_13-tests
View File

@ -12,7 +12,7 @@ set -e
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_FYSETC_F6_13 opt_set MOTHERBOARD BOARD_FYSETC_F6_13
opt_enable DGUS_LCD_UI_FYSETC opt_enable DGUS_LCD_UI_FYSETC
exec_test $1 $2 "FYSETC F6 1.3 with DGUS" exec_test $1 $2 "FYSETC F6 1.3 with DGUS" "$3"
# clean up # clean up
restore_configs restore_configs

2
buildroot/tests/FYSETC_S6-tests
View File

@ -11,7 +11,7 @@ restore_configs
use_example_configs FYSETC/S6 use_example_configs FYSETC/S6
opt_set Y_DRIVER_TYPE TMC2209 opt_set Y_DRIVER_TYPE TMC2209
opt_set Z_DRIVER_TYPE TMC2130 opt_set Z_DRIVER_TYPE TMC2130
exec_test $1 $2 "FYSETC S6 Example" exec_test $1 $2 "FYSETC S6 Example" "$3"
# cleanup # cleanup
restore_configs restore_configs

2
buildroot/tests/LERDGEX-tests
View File

@ -12,7 +12,7 @@ set -e
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_LERDGE_X opt_set MOTHERBOARD BOARD_LERDGE_X
opt_set SERIAL_PORT 1 opt_set SERIAL_PORT 1
exec_test $1 $2 "LERDGE X with Default Configuration" exec_test $1 $2 "LERDGE X with Default Configuration" "$3"
# clean up # clean up
restore_configs restore_configs

6
buildroot/tests/LPC1768-tests
View File

@ -17,7 +17,7 @@ restore_configs
opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EFB opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EFB
opt_enable VIKI2 SDSUPPORT SDCARD_READONLY SERIAL_PORT_2 NEOPIXEL_LED opt_enable VIKI2 SDSUPPORT SDCARD_READONLY SERIAL_PORT_2 NEOPIXEL_LED
opt_set NEOPIXEL_PIN P1_16 opt_set NEOPIXEL_PIN P1_16
exec_test $1 $2 "ReARM EFB VIKI2, SDSUPPORT, 2 Serial ports (USB CDC + UART0), NeoPixel" exec_test $1 $2 "ReARM EFB VIKI2, SDSUPPORT, 2 Serial ports (USB CDC + UART0), NeoPixel" "$3"
#restore_configs #restore_configs
#use_example_configs Mks/Sbase #use_example_configs Mks/Sbase
@ -30,7 +30,7 @@ opt_set TEMP_SENSOR_1 1
opt_set NUM_SERVOS 2 opt_set NUM_SERVOS 2
opt_set SERVO_DELAY "{ 300, 300 }" opt_set SERVO_DELAY "{ 300, 300 }"
opt_enable SWITCHING_NOZZLE SWITCHING_NOZZLE_E1_SERVO_NR ULTIMAKERCONTROLLER opt_enable SWITCHING_NOZZLE SWITCHING_NOZZLE_E1_SERVO_NR ULTIMAKERCONTROLLER
exec_test $1 $2 "MKS SBASE with SWITCHING_NOZZLE" exec_test $1 $2 "MKS SBASE with SWITCHING_NOZZLE" "$3"
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EEB opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EEB
@ -47,7 +47,7 @@ opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT ADAPTIVE_FAN_
LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA EMERGENCY_PARSER LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA EMERGENCY_PARSER
opt_set GRID_MAX_POINTS_X 16 opt_set GRID_MAX_POINTS_X 16
opt_set NOZZLE_TO_PROBE_OFFSET "{ 0, 0, 0 }" opt_set NOZZLE_TO_PROBE_OFFSET "{ 0, 0, 0 }"
exec_test $1 $2 "Re-ARM with NOZZLE_AS_PROBE and many features." exec_test $1 $2 "Re-ARM with NOZZLE_AS_PROBE and many features." "$3"
# clean up # clean up
restore_configs restore_configs

8
buildroot/tests/LPC1769-tests
View File

@ -10,7 +10,7 @@ set -e
# Build with the default configurations # Build with the default configurations
# #
use_example_configs Azteeg/X5GT use_example_configs Azteeg/X5GT
exec_test $1 $2 "Azteeg X5GT Example Configuration" exec_test $1 $2 "Azteeg X5GT Example Configuration" "$3"
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_SMOOTHIEBOARD opt_set MOTHERBOARD BOARD_SMOOTHIEBOARD
@ -25,7 +25,7 @@ opt_enable VIKI2 SDSUPPORT ADAPTIVE_FAN_SLOWING NO_FAN_SLOWING_IN_PID_TUNING \
LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA EMERGENCY_PARSER LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA EMERGENCY_PARSER
opt_disable SD_PROCEDURE_DEPTH opt_disable SD_PROCEDURE_DEPTH
opt_set GRID_MAX_POINTS_X 16 opt_set GRID_MAX_POINTS_X 16
exec_test $1 $2 "Smoothieboard with many features" exec_test $1 $2 "Smoothieboard with many features" "$3"
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_SMOOTHIEBOARD opt_set MOTHERBOARD BOARD_SMOOTHIEBOARD
@ -39,7 +39,7 @@ opt_enable TFTGLCD_PANEL_SPI SDSUPPORT ADAPTIVE_FAN_SLOWING NO_FAN_SLOWING_IN_PI
Z_SAFE_HOMING ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE \ Z_SAFE_HOMING ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE \
LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA EMERGENCY_PARSER LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA EMERGENCY_PARSER
opt_set GRID_MAX_POINTS_X 16 opt_set GRID_MAX_POINTS_X 16
exec_test $1 $2 "Smoothieboard with TFTGLCD_PANEL_SPI" exec_test $1 $2 "Smoothieboard with TFTGLCD_PANEL_SPI" "$3"
#restore_configs #restore_configs
#opt_set MOTHERBOARD BOARD_AZTEEG_X5_MINI_WIFI #opt_set MOTHERBOARD BOARD_AZTEEG_X5_MINI_WIFI
@ -67,7 +67,7 @@ opt_enable AUTO_BED_LEVELING_BILINEAR EEPROM_SETTINGS EEPROM_CHITCHAT MECHANICAL
SENSORLESS_PROBING Z_SAFE_HOMING X_STALL_SENSITIVITY Y_STALL_SENSITIVITY Z_STALL_SENSITIVITY TMC_DEBUG \ SENSORLESS_PROBING Z_SAFE_HOMING X_STALL_SENSITIVITY Y_STALL_SENSITIVITY Z_STALL_SENSITIVITY TMC_DEBUG \
EXPERIMENTAL_I2CBUS EXPERIMENTAL_I2CBUS
opt_disable PSU_CONTROL opt_disable PSU_CONTROL
exec_test $1 $2 "Cohesion3D Remix DELTA + ABL Bilinear + EEPROM + SENSORLESS_PROBING" exec_test $1 $2 "Cohesion3D Remix DELTA + ABL Bilinear + EEPROM + SENSORLESS_PROBING" "$3"
# clean up # clean up
restore_configs restore_configs

2
buildroot/tests/NUCLEO_F767ZI-tests
View File

@ -15,7 +15,7 @@ opt_set SERIAL_PORT -1
opt_enable BLTOUCH Z_SAFE_HOMING SPEAKER opt_enable BLTOUCH Z_SAFE_HOMING SPEAKER
opt_set X_DRIVER_TYPE TMC2209 opt_set X_DRIVER_TYPE TMC2209
opt_set Y_DRIVER_TYPE TMC2208 opt_set Y_DRIVER_TYPE TMC2208
exec_test $1 $2 "Mixed timer usage" exec_test $1 $2 "Mixed timer usage" "$3"
# clean up # clean up
restore_configs restore_configs

2
buildroot/tests/SAMD51_grandcentral_m4-tests
View File

@ -33,7 +33,7 @@ opt_enable ENDSTOP_INTERRUPTS_FEATURE S_CURVE_ACCELERATION BLTOUCH Z_MIN_PROBE_R
MOVE_Z_WHEN_IDLE BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY \ MOVE_Z_WHEN_IDLE BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY \
LIN_ADVANCE ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE MONITOR_DRIVER_STATUS SENSORLESS_HOMING \ LIN_ADVANCE ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE MONITOR_DRIVER_STATUS SENSORLESS_HOMING \
SQUARE_WAVE_STEPPING TMC_DEBUG EXPERIMENTAL_SCURVE SQUARE_WAVE_STEPPING TMC_DEBUG EXPERIMENTAL_SCURVE
exec_test $1 $2 "Build Grand Central M4 Default Configuration" exec_test $1 $2 "Build Grand Central M4 Default Configuration" "$3"
# clean up # clean up
restore_configs restore_configs

2
buildroot/tests/STM32F070CB_malyan-tests
View File

@ -9,7 +9,7 @@ set -e
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_MALYAN_M200_V2 opt_set MOTHERBOARD BOARD_MALYAN_M200_V2
opt_set SERIAL_PORT -1 opt_set SERIAL_PORT -1
exec_test $1 $2 "Malyan M200 v2 Default Config" exec_test $1 $2 "Malyan M200 v2 Default Config" "$3"
# cleanup # cleanup
restore_configs restore_configs

2
buildroot/tests/STM32F070RB_malyan-tests
View File

@ -9,7 +9,7 @@ set -e
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_MALYAN_M200_V2 opt_set MOTHERBOARD BOARD_MALYAN_M200_V2
opt_set SERIAL_PORT -1 opt_set SERIAL_PORT -1
exec_test $1 $2 "Malyan M200 v2 Default Config" exec_test $1 $2 "Malyan M200 v2 Default Config" "$3"
# cleanup # cleanup
restore_configs restore_configs

2
buildroot/tests/STM32F103CB_malyan-tests
View File

@ -7,7 +7,7 @@
set -e set -e
use_example_configs Malyan/M200 use_example_configs Malyan/M200
exec_test $1 $2 "Malyan M200" exec_test $1 $2 "Malyan M200" "$3"
# cleanup # cleanup
restore_configs restore_configs

2
buildroot/tests/STM32F103RC_btt-tests
View File

@ -22,7 +22,7 @@ opt_set Y_SLAVE_ADDRESS 1
opt_set Z_SLAVE_ADDRESS 2 opt_set Z_SLAVE_ADDRESS 2
opt_set E0_SLAVE_ADDRESS 3 opt_set E0_SLAVE_ADDRESS 3
exec_test $1 $2 "BigTreeTech SKR Mini E3 1.0 - Basic Config with TMC2209 HW Serial" exec_test $1 $2 "BigTreeTech SKR Mini E3 1.0 - Basic Config with TMC2209 HW Serial" "$3"
# clean up # clean up
restore_configs restore_configs

2
buildroot/tests/STM32F103RC_btt_USB-tests
View File

@ -13,7 +13,7 @@ restore_configs
opt_set MOTHERBOARD BOARD_BTT_SKR_MINI_V1_1 opt_set MOTHERBOARD BOARD_BTT_SKR_MINI_V1_1
opt_set SERIAL_PORT 1 opt_set SERIAL_PORT 1
opt_set SERIAL_PORT_2 -1 opt_set SERIAL_PORT_2 -1
exec_test $1 $2 "BigTreeTech SKR Mini v1.1 - Basic Configuration" exec_test $1 $2 "BigTreeTech SKR Mini v1.1 - Basic Configuration" "$3"
# clean up # clean up
restore_configs restore_configs

2
buildroot/tests/STM32F103RC_fysetc-tests
View File

@ -10,7 +10,7 @@ set -e
# Build with the default configurations # Build with the default configurations
# #
use_example_configs "Creality/Ender-3/FYSETC Cheetah 1.2/base" use_example_configs "Creality/Ender-3/FYSETC Cheetah 1.2/base"
exec_test $1 $2 "Cheetah 1.2 Configuration" exec_test $1 $2 "Cheetah 1.2 Configuration" "$3"
# clean up # clean up
restore_configs restore_configs

2
buildroot/tests/STM32F103RC_meeb-tests
View File

@ -17,7 +17,7 @@ opt_set X_DRIVER_TYPE TMC2208
opt_set Y_DRIVER_TYPE TMC2208 opt_set Y_DRIVER_TYPE TMC2208
opt_set Z_DRIVER_TYPE TMC2208 opt_set Z_DRIVER_TYPE TMC2208
opt_set E0_DRIVER_TYPE TMC2208 opt_set E0_DRIVER_TYPE TMC2208
exec_test $1 $2 "MEEB_3DP - Basic Config with TMC2208 SW Serial" exec_test $1 $2 "MEEB_3DP - Basic Config with TMC2208 SW Serial" "$3"
# clean up # clean up
restore_configs restore_configs

2
buildroot/tests/STM32F103RE-tests
View File

@ -16,7 +16,7 @@ opt_set SERIAL_PORT -1
opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT \ opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT \
PAREN_COMMENTS GCODE_MOTION_MODES SINGLENOZZLE TOOLCHANGE_FILAMENT_SWAP TOOLCHANGE_PARK \ PAREN_COMMENTS GCODE_MOTION_MODES SINGLENOZZLE TOOLCHANGE_FILAMENT_SWAP TOOLCHANGE_PARK \
BAUD_RATE_GCODE GCODE_MACROS NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE BAUD_RATE_GCODE GCODE_MACROS NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE
exec_test $1 $2 "STM32F1R EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT PAREN_COMMENTS GCODE_MOTION_MODES" exec_test $1 $2 "STM32F1R EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT PAREN_COMMENTS GCODE_MOTION_MODES" "$3"
# cleanup # cleanup
restore_configs restore_configs

2
buildroot/tests/STM32F103RET6_creality-tests
View File

@ -11,6 +11,6 @@ set -e
# #
use_example_configs "Creality/Ender-3 V2" use_example_configs "Creality/Ender-3 V2"
opt_enable MARLIN_DEV_MODE opt_enable MARLIN_DEV_MODE
exec_test $1 $2 "Ender 3 v2" exec_test $1 $2 "Ender 3 v2" "$3"
restore_configs restore_configs

2
buildroot/tests/STM32F103RE_btt-tests
View File

@ -15,7 +15,7 @@ opt_set SERIAL_PORT 1
opt_set SERIAL_PORT_2 -1 opt_set SERIAL_PORT_2 -1
opt_set X_DRIVER_TYPE TMC2209 opt_set X_DRIVER_TYPE TMC2209
opt_set Y_DRIVER_TYPE TMC2130 opt_set Y_DRIVER_TYPE TMC2130
exec_test $1 $2 "BigTreeTech SKR E3 DIP v1.0 - Basic Config with mixed TMC Drivers" exec_test $1 $2 "BigTreeTech SKR E3 DIP v1.0 - Basic Config with mixed TMC Drivers" "$3"
# clean up # clean up
restore_configs restore_configs

2
buildroot/tests/STM32F103RE_btt_USB-tests
View File

@ -13,7 +13,7 @@ restore_configs
opt_set MOTHERBOARD BOARD_BTT_SKR_E3_DIP opt_set MOTHERBOARD BOARD_BTT_SKR_E3_DIP
opt_set SERIAL_PORT 1 opt_set SERIAL_PORT 1
opt_set SERIAL_PORT_2 -1 opt_set SERIAL_PORT_2 -1
exec_test $1 $2 "BigTreeTech SKR E3 DIP v1.0 - Basic Configuration" exec_test $1 $2 "BigTreeTech SKR E3 DIP v1.0 - Basic Configuration" "$3"
# clean up # clean up
restore_configs restore_configs

2
buildroot/tests/STM32F103VE_longer-tests
View File

@ -8,7 +8,7 @@ set -e
use_example_configs Alfawise/U20 use_example_configs Alfawise/U20
opt_enable BAUD_RATE_GCODE opt_enable BAUD_RATE_GCODE
exec_test $1 $2 "Full-featured U20 config" exec_test $1 $2 "Full-featured U20 config" "$3"
# cleanup # cleanup
restore_configs restore_configs

2
buildroot/tests/STM32F4-tests
View File

@ -10,7 +10,7 @@ set -e
# Build with the default configurations # Build with the default configurations
# #
use_example_configs STM32/STM32F4 use_example_configs STM32/STM32F4
exec_test $1 $2 "STM32F4 Default Configuration" exec_test $1 $2 "STM32F4 Default Configuration" "$3"
# clean up # clean up
restore_configs restore_configs

2
buildroot/tests/STM32F401VE_STEVAL-tests
View File

@ -10,7 +10,7 @@ set -e
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_STEVAL_3DP001V1 opt_set MOTHERBOARD BOARD_STEVAL_3DP001V1
opt_set SERIAL_PORT -1 opt_set SERIAL_PORT -1
exec_test $1 $2 "STM32F401VE_STEVAL Default Config" exec_test $1 $2 "STM32F401VE_STEVAL Default Config" "$3"
# cleanup # cleanup
restore_configs restore_configs

2
buildroot/tests/STM32F407VE_black-tests
View File

@ -9,7 +9,7 @@ set -e
restore_configs restore_configs
use_example_configs STM32/Black_STM32F407VET6 use_example_configs STM32/Black_STM32F407VET6
opt_enable BAUD_RATE_GCODE opt_enable BAUD_RATE_GCODE
exec_test $1 $2 "Full-featured Sample Black STM32F407VET6 config" exec_test $1 $2 "Full-featured Sample Black STM32F407VET6 config" "$3"
# cleanup # cleanup
restore_configs restore_configs

2
buildroot/tests/STM32F7-tests
View File

@ -12,7 +12,7 @@ set -e
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_REMRAM_V1 opt_set MOTHERBOARD BOARD_REMRAM_V1
opt_set SERIAL_PORT 1 opt_set SERIAL_PORT 1
exec_test $1 $2 "Default Configuration" exec_test $1 $2 "Default Configuration" "$3"
# clean up # clean up
restore_configs restore_configs

2
buildroot/tests/at90usb1286_cdc-tests
View File

@ -11,7 +11,7 @@ set -e
# #
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_BRAINWAVE_PRO opt_set MOTHERBOARD BOARD_BRAINWAVE_PRO
exec_test $1 $2 "Default Configuration" exec_test $1 $2 "Default Configuration" "$3"
# clean up # clean up
restore_configs restore_configs

4
buildroot/tests/at90usb1286_dfu-tests
View File

@ -11,12 +11,12 @@ set -e
# #
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_PRINTRBOARD opt_set MOTHERBOARD BOARD_PRINTRBOARD
exec_test $1 $2 "Printrboard Configuration" exec_test $1 $2 "Printrboard Configuration" "$3"
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_PRINTRBOARD_REVF opt_set MOTHERBOARD BOARD_PRINTRBOARD_REVF
opt_enable MINIPANEL opt_enable MINIPANEL
exec_test $1 $2 "Printrboard RevF with MiniPanel and Stepper DAC (in pins file)" exec_test $1 $2 "Printrboard RevF with MiniPanel and Stepper DAC (in pins file)" "$3"
# clean up # clean up
restore_configs restore_configs

4
buildroot/tests/esp32-tests
View File

@ -15,7 +15,7 @@ opt_enable WIFISUPPORT WEBSUPPORT GCODE_MACROS BAUD_RATE_GCODE M115_GEOMETRY_REP
opt_add WIFI_SSID "\"ssid\"" opt_add WIFI_SSID "\"ssid\""
opt_add WIFI_PWD "\"password\"" opt_add WIFI_PWD "\"password\""
opt_set TX_BUFFER_SIZE 64 opt_set TX_BUFFER_SIZE 64
exec_test $1 $2 "ESP32 with WIFISUPPORT and WEBSUPPORT" exec_test $1 $2 "ESP32 with WIFISUPPORT and WEBSUPPORT" "$3"
# #
# Build with TMC drivers using hardware serial # Build with TMC drivers using hardware serial
@ -35,7 +35,7 @@ opt_set Y_SLAVE_ADDRESS 1
opt_set Z_SLAVE_ADDRESS 2 opt_set Z_SLAVE_ADDRESS 2
opt_set E0_SLAVE_ADDRESS 3 opt_set E0_SLAVE_ADDRESS 3
opt_enable HOTEND_IDLE_TIMEOUT opt_enable HOTEND_IDLE_TIMEOUT
exec_test $1 $2 "ESP32, TMC HW Serial, Hotend Idle" exec_test $1 $2 "ESP32, TMC HW Serial, Hotend Idle" "$3"
# cleanup # cleanup
restore_configs restore_configs

2
buildroot/tests/jgaurora_a5s_a1-tests
View File

@ -10,7 +10,7 @@ set -e
# Build with the default configurations # Build with the default configurations
# #
use_example_configs JGAurora/A5S use_example_configs JGAurora/A5S
exec_test $1 $2 "JGAurora/A5S Configuration" exec_test $1 $2 "JGAurora/A5S Configuration" "$3"
# clean up # clean up
restore_configs restore_configs

2
buildroot/tests/linux_native-tests
View File

@ -13,7 +13,7 @@ restore_configs
opt_set MOTHERBOARD BOARD_LINUX_RAMPS opt_set MOTHERBOARD BOARD_LINUX_RAMPS
opt_set TEMP_SENSOR_BED 1 opt_set TEMP_SENSOR_BED 1
opt_enable PIDTEMPBED EEPROM_SETTINGS BAUD_RATE_GCODE opt_enable PIDTEMPBED EEPROM_SETTINGS BAUD_RATE_GCODE
exec_test $1 $2 "Linux with EEPROM" exec_test $1 $2 "Linux with EEPROM" "$3"
# cleanup # cleanup
restore_configs restore_configs

2
buildroot/tests/malyan_M300-tests
View File

@ -10,7 +10,7 @@ restore_configs
use_example_configs "delta/Malyan M300" use_example_configs "delta/Malyan M300"
opt_disable AUTO_BED_LEVELING_3POINT opt_disable AUTO_BED_LEVELING_3POINT
opt_set LCD_SERIAL_PORT 1 opt_set LCD_SERIAL_PORT 1
exec_test $1 $2 "Malyan M300 (delta)" exec_test $1 $2 "Malyan M300 (delta)" "$3"
# cleanup # cleanup
restore_configs restore_configs

8
buildroot/tests/mega1280-tests
View File

@ -27,7 +27,7 @@ opt_set POWER_MONITOR_CURRENT_PIN 14
opt_set POWER_MONITOR_VOLTAGE_PIN 15 opt_set POWER_MONITOR_VOLTAGE_PIN 15
opt_set CLOSED_LOOP_ENABLE_PIN 44 opt_set CLOSED_LOOP_ENABLE_PIN 44
opt_set CLOSED_LOOP_MOVE_COMPLETE_PIN 45 opt_set CLOSED_LOOP_MOVE_COMPLETE_PIN 45
exec_test $1 $2 "Spindle, MESH_BED_LEVELING, closed loop, Power Monitor, and LCD" exec_test $1 $2 "Spindle, MESH_BED_LEVELING, closed loop, Power Monitor, and LCD" "$3"
# #
# Test DUAL_X_CARRIAGE # Test DUAL_X_CARRIAGE
@ -39,21 +39,21 @@ opt_set EXTRUDERS 2
opt_set TEMP_SENSOR_1 1 opt_set TEMP_SENSOR_1 1
opt_enable USE_XMAX_PLUG DUAL_X_CARRIAGE REPRAPWORLD_KEYPAD opt_enable USE_XMAX_PLUG DUAL_X_CARRIAGE REPRAPWORLD_KEYPAD
opt_set REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 opt_set REPRAPWORLD_KEYPAD_MOVE_STEP 10.0
exec_test $1 $2 "TT Oscar | DUAL_X_CARRIAGE" exec_test $1 $2 "TT Oscar | DUAL_X_CARRIAGE" "$3"
# #
# Delta Config (generic) + Probeless # Delta Config (generic) + Probeless
# #
use_example_configs delta/generic use_example_configs delta/generic
opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER DELTA_AUTO_CALIBRATION DELTA_CALIBRATION_MENU opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER DELTA_AUTO_CALIBRATION DELTA_CALIBRATION_MENU
exec_test $1 $2 "RAMPS | DELTA | RRD LCD | DELTA_AUTO_CALIBRATION | DELTA_CALIBRATION_MENU" exec_test $1 $2 "RAMPS | DELTA | RRD LCD | DELTA_AUTO_CALIBRATION | DELTA_CALIBRATION_MENU" "$3"
# #
# Delta Config (generic) + ABL bilinear + BLTOUCH # Delta Config (generic) + ABL bilinear + BLTOUCH
use_example_configs delta/generic use_example_configs delta/generic
opt_set LCD_LANGUAGE cz opt_set LCD_LANGUAGE cz
opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER DELTA_CALIBRATION_MENU AUTO_BED_LEVELING_BILINEAR BLTOUCH opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER DELTA_CALIBRATION_MENU AUTO_BED_LEVELING_BILINEAR BLTOUCH
exec_test $1 $2 "DELTA | RRD LCD | ABL Bilinear | BLTOUCH" exec_test $1 $2 "DELTA | RRD LCD | ABL Bilinear | BLTOUCH" "$3"
# clean up # clean up
restore_configs restore_configs

20
buildroot/tests/mega2560-tests
View File

@ -32,7 +32,7 @@ opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATU
MULTI_NOZZLE_DUPLICATION CLASSIC_JERK LIN_ADVANCE EXTRA_LIN_ADVANCE_K QUICK_HOME \ MULTI_NOZZLE_DUPLICATION CLASSIC_JERK LIN_ADVANCE EXTRA_LIN_ADVANCE_K QUICK_HOME \
LCD_SET_PROGRESS_MANUALLY PRINT_PROGRESS_SHOW_DECIMALS SHOW_REMAINING_TIME \ LCD_SET_PROGRESS_MANUALLY PRINT_PROGRESS_SHOW_DECIMALS SHOW_REMAINING_TIME \
BABYSTEPPING BABYSTEP_XY NANODLP_Z_SYNC I2C_POSITION_ENCODERS M114_DETAIL BABYSTEPPING BABYSTEP_XY NANODLP_Z_SYNC I2C_POSITION_ENCODERS M114_DETAIL
exec_test $1 $2 "Azteeg X3 Pro | EXTRUDERS 5 | RRDFGSC | UBL | LIN_ADVANCE ..." exec_test $1 $2 "Azteeg X3 Pro | EXTRUDERS 5 | RRDFGSC | UBL | LIN_ADVANCE ..." "$3"
# #
# Add a Sled Z Probe, use UBL Cartesian moves, use Japanese language # Add a Sled Z Probe, use UBL Cartesian moves, use Japanese language
@ -58,7 +58,7 @@ opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATU
opt_set LCD_LANGUAGE jp_kana opt_set LCD_LANGUAGE jp_kana
opt_disable SEGMENT_LEVELED_MOVES opt_disable SEGMENT_LEVELED_MOVES
opt_enable BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET DOUBLECLICK_FOR_Z_BABYSTEPPING BABYSTEP_HOTEND_Z_OFFSET BABYSTEP_DISPLAY_TOTAL M114_DETAIL opt_enable BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET DOUBLECLICK_FOR_Z_BABYSTEPPING BABYSTEP_HOTEND_Z_OFFSET BABYSTEP_DISPLAY_TOTAL M114_DETAIL
exec_test $1 $2 "Azteeg X3 Pro | EXTRUDERS 5 | RRDFGSC | UBL | LIN_ADVANCE | Sled Probe | Skew | JP-Kana | Babystep offsets ..." exec_test $1 $2 "Azteeg X3 Pro | EXTRUDERS 5 | RRDFGSC | UBL | LIN_ADVANCE | Sled Probe | Skew | JP-Kana | Babystep offsets ..." "$3"
# #
# Test a Servo Probe # Test a Servo Probe
@ -73,7 +73,7 @@ opt_enable ZONESTAR_LCD Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_
NO_VOLUMETRICS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES AUTOTEMP G38_PROBE_TARGET JOYSTICK \ NO_VOLUMETRICS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES AUTOTEMP G38_PROBE_TARGET JOYSTICK \
PRUSA_MMU2 MMU2_MENUS PRUSA_MMU2_S_MODE DIRECT_STEPPING DETECT_BROKEN_ENDSTOP \ PRUSA_MMU2 MMU2_MENUS PRUSA_MMU2_S_MODE DIRECT_STEPPING DETECT_BROKEN_ENDSTOP \
FILAMENT_RUNOUT_SENSOR NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE Z_SAFE_HOMING FILAMENT_RUNOUT_SENSOR NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE Z_SAFE_HOMING
exec_test $1 $2 "RAMPS | ZONESTAR + Chinese | MMU2 | Servo | 3-Point + Debug | G38 ..." exec_test $1 $2 "RAMPS | ZONESTAR + Chinese | MMU2 | Servo | 3-Point + Debug | G38 ..." "$3"
# #
# 5 runout sensors with distinct states # 5 runout sensors with distinct states
@ -110,7 +110,7 @@ opt_add M100_FREE_MEMORY_DUMPER
opt_add M100_FREE_MEMORY_CORRUPTOR opt_add M100_FREE_MEMORY_CORRUPTOR
opt_set PWM_MOTOR_CURRENT "{ 1300, 1300, 1250 }" opt_set PWM_MOTOR_CURRENT "{ 1300, 1300, 1250 }"
opt_set I2C_SLAVE_ADDRESS 63 opt_set I2C_SLAVE_ADDRESS 63
exec_test $1 $2 "MEGACONTROLLER | Minipanel | M100 | PWM_MOTOR_CURRENT | PRINTCOUNTER | Advanced Pause ..." exec_test $1 $2 "MEGACONTROLLER | Minipanel | M100 | PWM_MOTOR_CURRENT | PRINTCOUNTER | Advanced Pause ..." "$3"
# #
# Mixing Extruder with 5 steppers, Greek # Mixing Extruder with 5 steppers, Greek
@ -122,7 +122,7 @@ opt_enable MIXING_EXTRUDER GRADIENT_MIX GRADIENT_VTOOL CR10_STOCKDISPLAY \
USE_CONTROLLER_FAN CONTROLLER_FAN_EDITABLE CONTROLLER_FAN_IGNORE_Z USE_CONTROLLER_FAN CONTROLLER_FAN_EDITABLE CONTROLLER_FAN_IGNORE_Z
opt_set MIXING_STEPPERS 5 opt_set MIXING_STEPPERS 5
opt_set LCD_LANGUAGE ru opt_set LCD_LANGUAGE ru
exec_test $1 $2 "Azteeg X3 | Mixing Extruder (x5) | Gradient Mix | Greek" exec_test $1 $2 "Azteeg X3 | Mixing Extruder (x5) | Gradient Mix | Greek" "$3"
# #
# Test SPEAKER with BOARD_BQ_ZUM_MEGA_3D and BQ_LCD_SMART_CONTROLLER # Test SPEAKER with BOARD_BQ_ZUM_MEGA_3D and BQ_LCD_SMART_CONTROLLER
@ -163,7 +163,7 @@ opt_set FAN_MIN_PWM 50
opt_set FAN_KICKSTART_TIME 100 opt_set FAN_KICKSTART_TIME 100
opt_set XY_FREQUENCY_LIMIT 15 opt_set XY_FREQUENCY_LIMIT 15
opt_add FILWIDTH_PIN 5 opt_add FILWIDTH_PIN 5
exec_test $1 $2 "Mightyboard Rev. E | CoreXY, Gradient Mix | Endstop Int. | Home Y > X | FW Retract ..." exec_test $1 $2 "Mightyboard Rev. E | CoreXY, Gradient Mix | Endstop Int. | Home Y > X | FW Retract ..." "$3"
######## Other Standard LCD/Panels ############## ######## Other Standard LCD/Panels ##############
# #
@ -286,13 +286,13 @@ opt_add L6470_CHAIN_MISO_PIN 49
opt_add L6470_CHAIN_MOSI_PIN 40 opt_add L6470_CHAIN_MOSI_PIN 40
opt_add L6470_CHAIN_SS_PIN 42 opt_add L6470_CHAIN_SS_PIN 42
opt_add "ENABLE_RESET_L64XX_CHIPS(V) NOOP" opt_add "ENABLE_RESET_L64XX_CHIPS(V) NOOP"
exec_test $1 $2 "DELTA, RAMPS, L6470, UBL, Allen Key, EEPROM, OLED_PANEL_TINYBOY2..." exec_test $1 $2 "DELTA, RAMPS, L6470, UBL, Allen Key, EEPROM, OLED_PANEL_TINYBOY2..." "$3"
# #
# Delta Config (FLSUN AC because it's complex) # Delta Config (FLSUN AC because it's complex)
# #
use_example_configs delta/FLSUN/auto_calibrate use_example_configs delta/FLSUN/auto_calibrate
exec_test $1 $2 "RAMPS 1.3 | DELTA | FLSUN AC Config" exec_test $1 $2 "RAMPS 1.3 | DELTA | FLSUN AC Config" "$3"
# #
# Makibox Config need to check board type for Teensy++ 2.0 # Makibox Config need to check board type for Teensy++ 2.0
@ -315,7 +315,7 @@ opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER \
MARLIN_BRICKOUT MARLIN_INVADERS MARLIN_SNAKE \ MARLIN_BRICKOUT MARLIN_INVADERS MARLIN_SNAKE \
MONITOR_DRIVER_STATUS STEALTHCHOP_XY STEALTHCHOP_Z STEALTHCHOP_E HYBRID_THRESHOLD \ MONITOR_DRIVER_STATUS STEALTHCHOP_XY STEALTHCHOP_Z STEALTHCHOP_E HYBRID_THRESHOLD \
USE_ZMIN_PLUG SENSORLESS_HOMING TMC_DEBUG M114_DETAIL USE_ZMIN_PLUG SENSORLESS_HOMING TMC_DEBUG M114_DETAIL
exec_test $1 $2 "RAMPS | Mixed TMC | Sensorless | RRDFGSC | Games" exec_test $1 $2 "RAMPS | Mixed TMC | Sensorless | RRDFGSC | Games" "$3"
# #
# SCARA with Mixed TMC # SCARA with Mixed TMC
@ -330,7 +330,7 @@ opt_set X_DRIVER_TYPE TMC2209
opt_set Y_DRIVER_TYPE TMC2130 opt_set Y_DRIVER_TYPE TMC2130
opt_set Z_DRIVER_TYPE TMC2130_STANDALONE opt_set Z_DRIVER_TYPE TMC2130_STANDALONE
opt_set E0_DRIVER_TYPE TMC2660 opt_set E0_DRIVER_TYPE TMC2660
exec_test $1 $2 "RAMPS | SCARA | Mixed TMC | EEPROM" exec_test $1 $2 "RAMPS | SCARA | Mixed TMC | EEPROM" "$3"
# #
# tvrrug Config need to check board type for sanguino atmega644p # tvrrug Config need to check board type for sanguino atmega644p

2
buildroot/tests/mks_robin-tests
View File

@ -8,7 +8,7 @@
set -e set -e
use_example_configs Mks/Robin use_example_configs Mks/Robin
exec_test $1 $2 "MKS Robin config (FSMC Color UI)" exec_test $1 $2 "MKS Robin config (FSMC Color UI)" "$3"
# cleanup # cleanup
restore_configs restore_configs

2
buildroot/tests/mks_robin_lite-tests
View File

@ -11,7 +11,7 @@ opt_set MOTHERBOARD BOARD_MKS_ROBIN_LITE
opt_set SERIAL_PORT 1 opt_set SERIAL_PORT 1
opt_enable EEPROM_SETTINGS opt_enable EEPROM_SETTINGS
opt_enable SDSUPPORT opt_enable SDSUPPORT
exec_test $1 $2 "Default Configuration with Fallback SD EEPROM" exec_test $1 $2 "Default Configuration with Fallback SD EEPROM" "$3"
# cleanup # cleanup
restore_configs restore_configs

2
buildroot/tests/mks_robin_mini-tests
View File

@ -11,7 +11,7 @@ use_example_configs Mks/Robin
opt_set MOTHERBOARD BOARD_MKS_ROBIN_MINI opt_set MOTHERBOARD BOARD_MKS_ROBIN_MINI
opt_set EXTRUDERS 1 opt_set EXTRUDERS 1
opt_set TEMP_SENSOR_1 0 opt_set TEMP_SENSOR_1 0
exec_test $1 $2 "MKS Robin mini" exec_test $1 $2 "MKS Robin mini" "$3"
# cleanup # cleanup
restore_configs restore_configs

12
buildroot/tests/mks_robin_nano35-tests
View File

@ -12,7 +12,7 @@ set -e
# #
use_example_configs Mks/Robin use_example_configs Mks/Robin
opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO
exec_test $1 $2 "MKS Robin nano v1.2 Emulated DOGM FSMC" exec_test $1 $2 "MKS Robin nano v1.2 Emulated DOGM FSMC" "$3"
# #
# MKS Robin v2 nano Emulated DOGM SPI # MKS Robin v2 nano Emulated DOGM SPI
@ -22,7 +22,7 @@ use_example_configs Mks/Robin
opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2 opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
opt_disable TFT_INTERFACE_FSMC opt_disable TFT_INTERFACE_FSMC
opt_enable TFT_INTERFACE_SPI opt_enable TFT_INTERFACE_SPI
exec_test $1 $2 "MKS Robin v2 nano Emulated DOGM SPI" exec_test $1 $2 "MKS Robin v2 nano Emulated DOGM SPI" "$3"
# #
# MKS Robin nano v1.2 LVGL FSMC # MKS Robin nano v1.2 LVGL FSMC
@ -31,7 +31,7 @@ use_example_configs Mks/Robin
opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO
opt_disable TFT_CLASSIC_UI TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240 opt_disable TFT_CLASSIC_UI TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240
opt_enable TFT_LVGL_UI TFT_RES_480x320 opt_enable TFT_LVGL_UI TFT_RES_480x320
exec_test $1 $2 "MKS Robin nano v1.2 LVGL FSMC" exec_test $1 $2 "MKS Robin nano v1.2 LVGL FSMC" "$3"
# #
# MKS Robin v2 nano LVGL SPI # MKS Robin v2 nano LVGL SPI
@ -41,7 +41,7 @@ use_example_configs Mks/Robin
opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2 opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
opt_disable TFT_INTERFACE_FSMC TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240 opt_disable TFT_INTERFACE_FSMC TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240
opt_enable TFT_INTERFACE_SPI TFT_LVGL_UI TFT_RES_480x320 opt_enable TFT_INTERFACE_SPI TFT_LVGL_UI TFT_RES_480x320
exec_test $1 $2 "MKS Robin v2 nano LVGL SPI" exec_test $1 $2 "MKS Robin v2 nano LVGL SPI" "$3"
# #
# MKS Robin v2 nano New Color UI 480x320 SPI # MKS Robin v2 nano New Color UI 480x320 SPI
@ -51,7 +51,7 @@ use_example_configs Mks/Robin
opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2 opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
opt_disable TFT_INTERFACE_FSMC TFT_RES_320x240 opt_disable TFT_INTERFACE_FSMC TFT_RES_320x240
opt_enable TFT_INTERFACE_SPI TFT_RES_480x320 opt_enable TFT_INTERFACE_SPI TFT_RES_480x320
exec_test $1 $2 "MKS Robin v2 nano New Color UI 480x320 SPI" exec_test $1 $2 "MKS Robin v2 nano New Color UI 480x320 SPI" "$3"
# #
# MKS Robin v2 nano LVGL SPI + TMC # MKS Robin v2 nano LVGL SPI + TMC
@ -63,7 +63,7 @@ opt_disable TFT_INTERFACE_FSMC TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240
opt_enable TFT_INTERFACE_SPI TFT_LVGL_UI TFT_RES_480x320 opt_enable TFT_INTERFACE_SPI TFT_LVGL_UI TFT_RES_480x320
opt_set X_DRIVER_TYPE TMC2209 opt_set X_DRIVER_TYPE TMC2209
opt_set Y_DRIVER_TYPE TMC2209 opt_set Y_DRIVER_TYPE TMC2209
exec_test $1 $2 "MKS Robin v2 nano LVGL SPI + TMC" exec_test $1 $2 "MKS Robin v2 nano LVGL SPI + TMC" "$3"
# cleanup # cleanup
restore_configs restore_configs

2
buildroot/tests/mks_robin_pro-tests
View File

@ -15,7 +15,7 @@ opt_set X_DRIVER_TYPE TMC2209
opt_set Y_DRIVER_TYPE TMC2130 opt_set Y_DRIVER_TYPE TMC2130
opt_set TEMP_SENSOR_BED 1 opt_set TEMP_SENSOR_BED 1
opt_disable THERMAL_PROTECTION_HOTENDS opt_disable THERMAL_PROTECTION_HOTENDS
exec_test $1 $2 "MKS Robin Pro, TMC Drivers, no thermal protection" exec_test $1 $2 "MKS Robin Pro, TMC Drivers, no thermal protection" "$3"
# cleanup # cleanup
restore_configs restore_configs

2
buildroot/tests/mks_robin_stm32-tests
View File

@ -7,7 +7,7 @@
set -e set -e
use_example_configs Mks/Robin use_example_configs Mks/Robin
exec_test $1 $2 "MKS Robin base configuration" exec_test $1 $2 "MKS Robin base configuration" "$3"
# cleanup # cleanup
restore_configs restore_configs

6
buildroot/tests/rambo-tests
View File

@ -42,7 +42,7 @@ opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER LCD_PROGRESS_BAR LCD_PROGRESS_BAR_TE
SLOW_PWM_HEATERS THERMAL_PROTECTION_CHAMBER LIN_ADVANCE EXTRA_LIN_ADVANCE_K \ SLOW_PWM_HEATERS THERMAL_PROTECTION_CHAMBER LIN_ADVANCE EXTRA_LIN_ADVANCE_K \
HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT PINS_DEBUGGING MAX7219_DEBUG M114_DETAIL HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT PINS_DEBUGGING MAX7219_DEBUG M114_DETAIL
opt_add DEBUG_POWER_LOSS_RECOVERY opt_add DEBUG_POWER_LOSS_RECOVERY
exec_test $1 $2 "RAMBO | EXTRUDERS 2 | CHAR LCD + SD | FIX Probe | ABL-Linear | Advanced Pause | PLR | LEDs ..." exec_test $1 $2 "RAMBO | EXTRUDERS 2 | CHAR LCD + SD | FIX Probe | ABL-Linear | Advanced Pause | PLR | LEDs ..." "$3"
# #
# Full size Rambo Dual Endstop CNC # Full size Rambo Dual Endstop CNC
@ -58,7 +58,7 @@ opt_enable USE_XMAX_PLUG USE_YMAX_PLUG USE_ZMAX_PLUG \
S_CURVE_ACCELERATION X_DUAL_STEPPER_DRIVERS X_DUAL_ENDSTOPS Y_DUAL_STEPPER_DRIVERS Y_DUAL_ENDSTOPS \ S_CURVE_ACCELERATION X_DUAL_STEPPER_DRIVERS X_DUAL_ENDSTOPS Y_DUAL_STEPPER_DRIVERS Y_DUAL_ENDSTOPS \
ADAPTIVE_STEP_SMOOTHING CNC_COORDINATE_SYSTEMS GCODE_MOTION_MODES ADAPTIVE_STEP_SMOOTHING CNC_COORDINATE_SYSTEMS GCODE_MOTION_MODES
opt_disable MIN_SOFTWARE_ENDSTOP_Z MAX_SOFTWARE_ENDSTOPS opt_disable MIN_SOFTWARE_ENDSTOP_Z MAX_SOFTWARE_ENDSTOPS
exec_test $1 $2 "Rambo CNC Configuration" exec_test $1 $2 "Rambo CNC Configuration" "$3"
# #
# Rambo heated bed only # Rambo heated bed only
@ -79,7 +79,7 @@ opt_set X_DRIVER_TYPE TMC2130
opt_set Y_DRIVER_TYPE TMC2130 opt_set Y_DRIVER_TYPE TMC2130
opt_set Z_DRIVER_TYPE TMC2130 opt_set Z_DRIVER_TYPE TMC2130
opt_set E0_DRIVER_TYPE TMC2130 opt_set E0_DRIVER_TYPE TMC2130
exec_test $1 $2 "Einsy RAMBo with TMC2130" exec_test $1 $2 "Einsy RAMBo with TMC2130" "$3"
# clean up # clean up
restore_configs restore_configs

6
buildroot/tests/rumba32-tests
View File

@ -15,7 +15,7 @@ opt_enable PIDTEMPBED
opt_set TEMP_SENSOR_BED 1 opt_set TEMP_SENSOR_BED 1
opt_disable THERMAL_PROTECTION_BED opt_disable THERMAL_PROTECTION_BED
opt_set X_DRIVER_TYPE TMC2130 opt_set X_DRIVER_TYPE TMC2130
exec_test $1 $2 "RUMBA32 V1.0 with TMC2130, PID Bed, and bed thermal protection disabled" exec_test $1 $2 "RUMBA32 V1.0 with TMC2130, PID Bed, and bed thermal protection disabled" "$3"
# Build examples # Build examples
restore_configs restore_configs
@ -25,7 +25,7 @@ opt_enable PIDTEMPBED EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPH
opt_set TEMP_SENSOR_BED 1 opt_set TEMP_SENSOR_BED 1
opt_set X_DRIVER_TYPE TMC2130 opt_set X_DRIVER_TYPE TMC2130
opt_set Y_DRIVER_TYPE TMC2208 opt_set Y_DRIVER_TYPE TMC2208
exec_test $1 $2 "RUMBA32 V1.1 with TMC2130, TMC2208, PID Bed, EEPROM settings, and graphic LCD controller" exec_test $1 $2 "RUMBA32 V1.1 with TMC2130, TMC2208, PID Bed, EEPROM settings, and graphic LCD controller" "$3"
# Build examples # Build examples
restore_configs restore_configs
@ -33,7 +33,7 @@ opt_set MOTHERBOARD BOARD_RUMBA32_MKS
opt_set SERIAL_PORT -1 opt_set SERIAL_PORT -1
opt_set X_DRIVER_TYPE TMC2130 opt_set X_DRIVER_TYPE TMC2130
opt_set Y_DRIVER_TYPE TMC2208 opt_set Y_DRIVER_TYPE TMC2208
exec_test $1 $2 "RUMBA32 MKS Default Config with Mixed TMC Drivers" exec_test $1 $2 "RUMBA32 MKS Default Config with Mixed TMC Drivers" "$3"
# cleanup # cleanup
restore_configs restore_configs

42
buildroot/tests/run_tests
View File

@ -10,11 +10,27 @@ set -e
exec_test () { exec_test () {
printf "\n\033[0;32m[Test $2] \033[0m$3...\n" printf "\n\033[0;32m[Test $2] \033[0m$3...\n"
if platformio run --project-dir $1 -e $2 --silent; then # Check to see if we should skip tests
if [[ -n "$4" ]] ; then
if [[ ! "$3" =~ $4 ]] ; then
printf "\033[1;33mSkipped\033[0m\n"
return 0
fi
fi
if [[ -z "$VERBOSE_PLATFORMIO" ]] ; then
silent="--silent"
else
silent=""
fi
if platformio run --project-dir $1 -e $2 $silent; then
printf "\033[0;32mPassed\033[0m\n" printf "\033[0;32mPassed\033[0m\n"
return 0 return 0
else else
if [[ -n $GIT_RESET_HARD ]]; then
git reset --hard HEAD git reset --hard HEAD
else
restore_configs
fi
printf "\033[0;31mFailed!\033[0m\n" printf "\033[0;31mFailed!\033[0m\n"
return 1 return 1
fi fi
@ -30,12 +46,32 @@ if [[ $2 = "ALL" ]]; then
testenv=$(basename $f | cut -d"-" -f1) testenv=$(basename $f | cut -d"-" -f1)
printf "Running \033[0;32m$f\033[0m Tests\n" printf "Running \033[0;32m$f\033[0m Tests\n"
exec_test $1 "$testenv --target clean" "Setup Build Environment" exec_test $1 "$testenv --target clean" "Setup Build Environment"
$f $1 $testenv if [[ $GIT_RESET_HARD == "true" ]]; then
git reset --hard HEAD git reset --hard HEAD
else
restore_configs
fi
done done
else else
exec_test $1 "$2 --target clean" "Setup Build Environment" exec_test $1 "$2 --target clean" "Setup Build Environment"
$2-tests $1 $2 test_name="$3"
# If the test name is 1 or 2 digits, treat it as an index
if [[ "$test_name" =~ ^[0-9][0-9]?$ ]] ; then
# Find the test name that corresponds to that index
test_name="$(cat buildroot/tests/$2-tests | grep -e '^exec_test' | sed -n "$3p" | sed "s/.*\$1 \$2 \"\([^\"]*\).*/\1/g")"
if [[ -z "$test_name" ]] ; then
# Fail if none matches
printf "\033[0;31mCould not find test \033[0m#$3\033[0;31m in \033[0mbuildroot/tests/$2-tests\n"
exit 1
else
printf "\033[0;32mMatching test \033[0m#$3\033[0;32m: '\033[0m$test_name\033[0;32m'\n"
fi
fi
$2-tests $1 $2 "$test_name"
if [[ $GIT_RESET_HARD == "true" ]]; then
git reset --hard HEAD git reset --hard HEAD
else
restore_configs
fi
fi fi
printf "\033[0;32mAll tests completed successfully\033[0m\n" printf "\033[0;32mAll tests completed successfully\033[0m\n"

2
buildroot/tests/sanguino1284p-tests
View File

@ -11,7 +11,7 @@ set -e
# #
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_SANGUINOLOLU_12 opt_set MOTHERBOARD BOARD_SANGUINOLOLU_12
exec_test $1 $2 "Default Configuration" exec_test $1 $2 "Default Configuration" "$3"
# clean up # clean up
restore_configs restore_configs

2
buildroot/tests/sanguino644p-tests
View File

@ -11,7 +11,7 @@ set -e
# #
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_SANGUINOLOLU_12 opt_set MOTHERBOARD BOARD_SANGUINOLOLU_12
exec_test $1 $2 "Default Configuration" exec_test $1 $2 "Default Configuration" "$3"
# clean up # clean up
restore_configs restore_configs

4
buildroot/tests/teensy31-tests
View File

@ -8,7 +8,7 @@ set -e
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_TEENSY31_32 opt_set MOTHERBOARD BOARD_TEENSY31_32
exec_test $1 $2 "Teensy3.1 with default config" exec_test $1 $2 "Teensy3.1 with default config" "$3"
# #
# Test many features together # Test many features together
@ -27,4 +27,4 @@ opt_enable EEPROM_SETTINGS FILAMENT_WIDTH_SENSOR CALIBRATION_GCODE BAUD_RATE_GCO
HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT
opt_set I2C_SLAVE_ADDRESS 63 opt_set I2C_SLAVE_ADDRESS 63
opt_set GRID_MAX_POINTS_X 16 opt_set GRID_MAX_POINTS_X 16
exec_test $1 $2 "Teensy3.1 with many features" exec_test $1 $2 "Teensy3.1 with many features" "$3"

16
buildroot/tests/teensy35-tests
View File

@ -8,7 +8,7 @@ set -e
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_TEENSY35_36 opt_set MOTHERBOARD BOARD_TEENSY35_36
exec_test $1 $2 "Teensy3.5 with default config" exec_test $1 $2 "Teensy3.5 with default config" "$3"
# #
# Test as many features together as possible # Test as many features together as possible
@ -29,7 +29,7 @@ opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER LCD_INFO_MENU SDSUPPORT
HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT
opt_set I2C_SLAVE_ADDRESS 63 opt_set I2C_SLAVE_ADDRESS 63
opt_set GRID_MAX_POINTS_X 16 opt_set GRID_MAX_POINTS_X 16
exec_test $1 $2 "Teensy3.5 with many features" exec_test $1 $2 "Teensy3.5 with many features" "$3"
# #
# Test a Sled Z Probe with Linear leveling # Test a Sled Z Probe with Linear leveling
@ -37,7 +37,7 @@ exec_test $1 $2 "Teensy3.5 with many features"
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_TEENSY35_36 opt_set MOTHERBOARD BOARD_TEENSY35_36
opt_enable EEPROM_SETTINGS Z_PROBE_SLED Z_SAFE_HOMING AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE GCODE_MACROS opt_enable EEPROM_SETTINGS Z_PROBE_SLED Z_SAFE_HOMING AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE GCODE_MACROS
exec_test $1 $2 "Sled Z Probe with Linear leveling" exec_test $1 $2 "Sled Z Probe with Linear leveling" "$3"
# #
# Test a Servo Probe # Test a Servo Probe
@ -63,7 +63,7 @@ opt_set MOTHERBOARD BOARD_TEENSY35_36
opt_set EXTRUDERS 2 opt_set EXTRUDERS 2
opt_set TEMP_SENSOR_1 1 opt_set TEMP_SENSOR_1 1
opt_enable MAGNETIC_PARKING_EXTRUDER ULTIMAKERCONTROLLER opt_enable MAGNETIC_PARKING_EXTRUDER ULTIMAKERCONTROLLER
exec_test $1 $2 "MAGNETIC_PARKING_EXTRUDER with LCD" exec_test $1 $2 "MAGNETIC_PARKING_EXTRUDER with LCD" "$3"
# #
# Mixing Extruder # Mixing Extruder
@ -72,7 +72,7 @@ restore_configs
opt_set MOTHERBOARD BOARD_TEENSY35_36 opt_set MOTHERBOARD BOARD_TEENSY35_36
opt_enable MIXING_EXTRUDER DIRECT_MIXING_IN_G1 GRADIENT_MIX GRADIENT_VTOOL REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER opt_enable MIXING_EXTRUDER DIRECT_MIXING_IN_G1 GRADIENT_MIX GRADIENT_VTOOL REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
opt_set MIXING_STEPPERS 2 opt_set MIXING_STEPPERS 2
exec_test $1 $2 "Mixing Extruder" exec_test $1 $2 "Mixing Extruder" "$3"
# #
# Test SWITCHING_EXTRUDER # Test SWITCHING_EXTRUDER
@ -97,7 +97,7 @@ opt_set Y_MIN_ENDSTOP_INVERTING true
opt_add X_CS_PIN 46 opt_add X_CS_PIN 46
opt_add Y_CS_PIN 47 opt_add Y_CS_PIN 47
opt_enable USE_ZMIN_PLUG MONITOR_DRIVER_STATUS SENSORLESS_HOMING opt_enable USE_ZMIN_PLUG MONITOR_DRIVER_STATUS SENSORLESS_HOMING
exec_test $1 $2 "Teensy 3.5/3.6 COREXY" exec_test $1 $2 "Teensy 3.5/3.6 COREXY" "$3"
# #
# Enable COREXZ # Enable COREXZ
@ -105,7 +105,7 @@ exec_test $1 $2 "Teensy 3.5/3.6 COREXY"
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_TEENSY35_36 opt_set MOTHERBOARD BOARD_TEENSY35_36
opt_enable COREXZ opt_enable COREXZ
exec_test $1 $2 "Teensy 3.5/3.6 COREXZ" exec_test $1 $2 "Teensy 3.5/3.6 COREXZ" "$3"
# #
# Enable Dual Z with Dual Z endstops # Enable Dual Z with Dual Z endstops
@ -116,7 +116,7 @@ opt_set NUM_Z_STEPPER_DRIVERS 2
opt_enable Z_MULTI_ENDSTOPS USE_XMAX_PLUG opt_enable Z_MULTI_ENDSTOPS USE_XMAX_PLUG
pins_set ramps/RAMPS X_MAX_PIN -1 pins_set ramps/RAMPS X_MAX_PIN -1
opt_add Z2_MAX_PIN 2 opt_add Z2_MAX_PIN 2
exec_test $1 $2 "Dual Z with Dual Z endstops" exec_test $1 $2 "Dual Z with Dual Z endstops" "$3"
# Clean up # Clean up
restore_configs restore_configs

16
buildroot/tests/teensy41-tests
View File

@ -8,7 +8,7 @@ set -e
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_TEENSY41 opt_set MOTHERBOARD BOARD_TEENSY41
exec_test $1 $2 "Teensy4.1 with default config" exec_test $1 $2 "Teensy4.1 with default config" "$3"
# #
# Test as many features together as possible # Test as many features together as possible
@ -30,7 +30,7 @@ opt_enable EXTENSIBLE_UI LCD_INFO_MENU SDSUPPORT SDCARD_SORT_ALPHA \
opt_add EXTUI_EXAMPLE opt_add EXTUI_EXAMPLE
opt_set I2C_SLAVE_ADDRESS 63 opt_set I2C_SLAVE_ADDRESS 63
opt_set GRID_MAX_POINTS_X 16 opt_set GRID_MAX_POINTS_X 16
exec_test $1 $2 "Teensy4.1 with many features" exec_test $1 $2 "Teensy4.1 with many features" "$3"
# #
# Test a Sled Z Probe with Linear leveling # Test a Sled Z Probe with Linear leveling
@ -38,7 +38,7 @@ exec_test $1 $2 "Teensy4.1 with many features"
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_TEENSY41 opt_set MOTHERBOARD BOARD_TEENSY41
opt_enable EEPROM_SETTINGS Z_PROBE_SLED Z_SAFE_HOMING AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE GCODE_MACROS opt_enable EEPROM_SETTINGS Z_PROBE_SLED Z_SAFE_HOMING AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE GCODE_MACROS
exec_test $1 $2 "Sled Z Probe with Linear leveling" exec_test $1 $2 "Sled Z Probe with Linear leveling" "$3"
# #
# Test a Servo Probe # Test a Servo Probe
@ -65,7 +65,7 @@ opt_set EXTRUDERS 2
opt_set TEMP_SENSOR_1 1 opt_set TEMP_SENSOR_1 1
opt_set SERIAL_PORT_2 -2 opt_set SERIAL_PORT_2 -2
opt_enable EEPROM_SETTINGS MAGNETIC_PARKING_EXTRUDER opt_enable EEPROM_SETTINGS MAGNETIC_PARKING_EXTRUDER
exec_test $1 $2 "Ethernet, EEPROM, Magnetic Parking Extruder, No LCD" exec_test $1 $2 "Ethernet, EEPROM, Magnetic Parking Extruder, No LCD" "$3"
# #
# Mixing Extruder # Mixing Extruder
@ -74,7 +74,7 @@ restore_configs
opt_set MOTHERBOARD BOARD_TEENSY41 opt_set MOTHERBOARD BOARD_TEENSY41
opt_enable MIXING_EXTRUDER DIRECT_MIXING_IN_G1 GRADIENT_MIX GRADIENT_VTOOL opt_enable MIXING_EXTRUDER DIRECT_MIXING_IN_G1 GRADIENT_MIX GRADIENT_VTOOL
opt_set MIXING_STEPPERS 2 opt_set MIXING_STEPPERS 2
exec_test $1 $2 "Mixing Extruder" exec_test $1 $2 "Mixing Extruder" "$3"
# #
# Test SWITCHING_EXTRUDER # Test SWITCHING_EXTRUDER
@ -99,7 +99,7 @@ opt_set Y_MIN_ENDSTOP_INVERTING true
opt_add X_CS_PIN 46 opt_add X_CS_PIN 46
opt_add Y_CS_PIN 47 opt_add Y_CS_PIN 47
opt_enable USE_ZMIN_PLUG MONITOR_DRIVER_STATUS SENSORLESS_HOMING opt_enable USE_ZMIN_PLUG MONITOR_DRIVER_STATUS SENSORLESS_HOMING
exec_test $1 $2 "Teensy 4.0/4.1 COREXY" exec_test $1 $2 "Teensy 4.0/4.1 COREXY" "$3"
# #
# Enable COREXZ # Enable COREXZ
@ -107,7 +107,7 @@ exec_test $1 $2 "Teensy 4.0/4.1 COREXY"
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_TEENSY41 opt_set MOTHERBOARD BOARD_TEENSY41
opt_enable COREXZ opt_enable COREXZ
exec_test $1 $2 "Teensy 4.0/4.1 COREXZ" exec_test $1 $2 "Teensy 4.0/4.1 COREXZ" "$3"
# #
# Enable Dual Z with Dual Z endstops # Enable Dual Z with Dual Z endstops
@ -118,7 +118,7 @@ opt_enable Z_MULTI_ENDSTOPS USE_XMAX_PLUG
opt_set NUM_Z_STEPPER_DRIVERS 2 opt_set NUM_Z_STEPPER_DRIVERS 2
pins_set ramps/RAMPS X_MAX_PIN -1 pins_set ramps/RAMPS X_MAX_PIN -1
opt_add Z2_MAX_PIN 2 opt_add Z2_MAX_PIN 2
exec_test $1 $2 "Dual Z with Dual Z endstops" exec_test $1 $2 "Dual Z with Dual Z endstops" "$3"
# Clean up # Clean up
restore_configs restore_configs

19
docker-compose.yml Normal file
View File

@ -0,0 +1,19 @@
version: "3.8"
services:
# The main image: this doesn't run any particular command, but is mainly used
# for running tests locally
marlin:
image: marlin-dev
build:
dockerfile: Dockerfile
context: docker
working_dir: /code
volumes:
- .:/code
- platformio-cache:/root/.platformio
volumes:
# This volume holds installed libraries for PlatformIO. If this is deleted you
# will have to download all the dependencies again, which can be a very slow
# process
platformio-cache:

7
docker/Dockerfile Normal file
View File

@ -0,0 +1,7 @@
FROM python:3.9.0-buster
RUN pip install -U https://github.com/platformio/platformio-core/archive/develop.zip
RUN platformio update
# To get the test platforms
RUN pip install PyYaml
#ENV PATH /code/buildroot/bin/:/code/buildroot/tests/:${PATH}

12
get_test_targets.py Normal file
View File

@ -0,0 +1,12 @@
#!/usr/bin/env python
"""
Extract the builds used in Github CI, so that we can run them locally
"""
import yaml
with open('.github/workflows/test-builds.yml') as f:
github_configuration = yaml.safe_load(f)
test_platforms = github_configuration\
['jobs']['test_builds']['strategy']['matrix']['test-platform']
print(' '.join(test_platforms))