Merge pull request #407 from buildrob101/Marlin_v1
Combine and converge other I2C LCD branches (PANELOLU2, VIKI & PCF8575)
This commit is contained in:
commit
1a18a487f9
@ -315,6 +315,15 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
|
|||||||
// please keep turned on if you can.
|
// please keep turned on if you can.
|
||||||
//#define EEPROM_CHITCHAT
|
//#define EEPROM_CHITCHAT
|
||||||
|
|
||||||
|
// Preheat Constants
|
||||||
|
#define PLA_PREHEAT_HOTEND_TEMP 180
|
||||||
|
#define PLA_PREHEAT_HPB_TEMP 70
|
||||||
|
#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255
|
||||||
|
|
||||||
|
#define ABS_PREHEAT_HOTEND_TEMP 240
|
||||||
|
#define ABS_PREHEAT_HPB_TEMP 100
|
||||||
|
#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255
|
||||||
|
|
||||||
//LCD and SD support
|
//LCD and SD support
|
||||||
//#define ULTRA_LCD //general lcd support, also 16x2
|
//#define ULTRA_LCD //general lcd support, also 16x2
|
||||||
//#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
|
//#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
|
||||||
@ -360,15 +369,46 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
|
|||||||
#define ULTIPANEL
|
#define ULTIPANEL
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// Preheat Constants
|
//I2C PANELS
|
||||||
#define PLA_PREHEAT_HOTEND_TEMP 180
|
|
||||||
#define PLA_PREHEAT_HPB_TEMP 70
|
|
||||||
#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255
|
|
||||||
|
|
||||||
#define ABS_PREHEAT_HOTEND_TEMP 240
|
//#define LCD_I2C_SAINSMART_YWROBOT
|
||||||
#define ABS_PREHEAT_HPB_TEMP 100
|
#ifdef LCD_I2C_SAINSMART_YWROBOT
|
||||||
#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255
|
// This uses the LiquidCrystal_I2C library ( https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home )
|
||||||
|
// Make sure it is placed in the Arduino libraries directory.
|
||||||
|
#define LCD_I2C_TYPE_PCF8575
|
||||||
|
#define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander
|
||||||
|
#define NEWPANEL
|
||||||
|
#define ULTIPANEL
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// PANELOLU2 LCD with status LEDs, separate encoder and click inputs
|
||||||
|
//#define LCD_I2C_PANELOLU2
|
||||||
|
#ifdef LCD_I2C_PANELOLU2
|
||||||
|
// This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 )
|
||||||
|
// Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory.
|
||||||
|
// (v1.2.3 no longer requires you to define PANELOLU in the LiquidTWI2.h library header file)
|
||||||
|
// Note: The PANELOLU2 encoder click input can either be directly connected to a pin
|
||||||
|
// (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1).
|
||||||
|
#define LCD_I2C_TYPE_MCP23017
|
||||||
|
#define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
|
||||||
|
#define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD
|
||||||
|
#define NEWPANEL
|
||||||
|
#define ULTIPANEL
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs
|
||||||
|
//#define LCD_I2C_VIKI
|
||||||
|
#ifdef LCD_I2C_VIKI
|
||||||
|
// This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 )
|
||||||
|
// Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory.
|
||||||
|
// Note: The pause/stop/resume LCD button pin should be connected to the Arduino
|
||||||
|
// BTN_ENC pin (or set BTN_ENC to -1 if not used)
|
||||||
|
#define LCD_I2C_TYPE_MCP23017
|
||||||
|
#define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
|
||||||
|
#define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later)
|
||||||
|
#define NEWPANEL
|
||||||
|
#define ULTIPANEL
|
||||||
|
#endif
|
||||||
|
|
||||||
#ifdef ULTIPANEL
|
#ifdef ULTIPANEL
|
||||||
// #define NEWPANEL //enable this if you have a click-encoder panel
|
// #define NEWPANEL //enable this if you have a click-encoder panel
|
||||||
|
@ -34,7 +34,13 @@
|
|||||||
#include "pins.h"
|
#include "pins.h"
|
||||||
|
|
||||||
#ifdef ULTRA_LCD
|
#ifdef ULTRA_LCD
|
||||||
#ifdef DOGLCD
|
#if defined(LCD_I2C_TYPE_PCF8575)
|
||||||
|
#include <Wire.h>
|
||||||
|
#include <LiquidCrystal_I2C.h>
|
||||||
|
#elif defined(LCD_I2C_TYPE_MCP23017) || defined(LCD_I2C_TYPE_MCP23008)
|
||||||
|
#include <Wire.h>
|
||||||
|
#include <LiquidTWI2.h>
|
||||||
|
#elif defined(DOGLCD)
|
||||||
#include <U8glib.h> // library for graphics LCD by Oli Kraus (https://code.google.com/p/u8glib/)
|
#include <U8glib.h> // library for graphics LCD by Oli Kraus (https://code.google.com/p/u8glib/)
|
||||||
#else
|
#else
|
||||||
#include <LiquidCrystal.h> // library for character LCD
|
#include <LiquidCrystal.h> // library for character LCD
|
||||||
|
@ -40,11 +40,11 @@
|
|||||||
#include "language.h"
|
#include "language.h"
|
||||||
#include "pins_arduino.h"
|
#include "pins_arduino.h"
|
||||||
|
|
||||||
#if (defined NUM_SERVOS) && (NUM_SERVOS > 0)
|
#if NUM_SERVOS > 0
|
||||||
#include "Servo.h"
|
#include "Servo.h"
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#if DIGIPOTSS_PIN > -1
|
#if DIGIPOTSS_PIN > 0
|
||||||
#include <SPI.h>
|
#include <SPI.h>
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
@ -230,7 +230,7 @@ static uint8_t tmp_extruder;
|
|||||||
|
|
||||||
bool Stopped=false;
|
bool Stopped=false;
|
||||||
|
|
||||||
#if (defined NUM_SERVOS) && (NUM_SERVOS > 0)
|
#if NUM_SERVOS > 0
|
||||||
Servo servos[NUM_SERVOS];
|
Servo servos[NUM_SERVOS];
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
@ -309,7 +309,7 @@ void setup_killpin()
|
|||||||
void setup_photpin()
|
void setup_photpin()
|
||||||
{
|
{
|
||||||
#ifdef PHOTOGRAPH_PIN
|
#ifdef PHOTOGRAPH_PIN
|
||||||
#if (PHOTOGRAPH_PIN > -1)
|
#if (PHOTOGRAPH_PIN > 0)
|
||||||
SET_OUTPUT(PHOTOGRAPH_PIN);
|
SET_OUTPUT(PHOTOGRAPH_PIN);
|
||||||
WRITE(PHOTOGRAPH_PIN, LOW);
|
WRITE(PHOTOGRAPH_PIN, LOW);
|
||||||
#endif
|
#endif
|
||||||
@ -324,7 +324,7 @@ void setup_powerhold()
|
|||||||
WRITE(SUICIDE_PIN, HIGH);
|
WRITE(SUICIDE_PIN, HIGH);
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
#if (PS_ON_PIN > -1)
|
#if (PS_ON_PIN > 0)
|
||||||
SET_OUTPUT(PS_ON_PIN);
|
SET_OUTPUT(PS_ON_PIN);
|
||||||
WRITE(PS_ON_PIN, PS_ON_AWAKE);
|
WRITE(PS_ON_PIN, PS_ON_AWAKE);
|
||||||
#endif
|
#endif
|
||||||
@ -333,7 +333,7 @@ void setup_powerhold()
|
|||||||
void suicide()
|
void suicide()
|
||||||
{
|
{
|
||||||
#ifdef SUICIDE_PIN
|
#ifdef SUICIDE_PIN
|
||||||
#if (SUICIDE_PIN> -1)
|
#if (SUICIDE_PIN > 0)
|
||||||
SET_OUTPUT(SUICIDE_PIN);
|
SET_OUTPUT(SUICIDE_PIN);
|
||||||
WRITE(SUICIDE_PIN, LOW);
|
WRITE(SUICIDE_PIN, LOW);
|
||||||
#endif
|
#endif
|
||||||
@ -342,16 +342,16 @@ void suicide()
|
|||||||
|
|
||||||
void servo_init()
|
void servo_init()
|
||||||
{
|
{
|
||||||
#if (NUM_SERVOS >= 1) && defined (SERVO0_PIN) && (SERVO0_PIN > -1)
|
#if (NUM_SERVOS >= 1) && (SERVO0_PIN > 0)
|
||||||
servos[0].attach(SERVO0_PIN);
|
servos[0].attach(SERVO0_PIN);
|
||||||
#endif
|
#endif
|
||||||
#if (NUM_SERVOS >= 2) && defined (SERVO1_PIN) && (SERVO1_PIN > -1)
|
#if (NUM_SERVOS >= 2) && (SERVO1_PIN > 0)
|
||||||
servos[1].attach(SERVO1_PIN);
|
servos[1].attach(SERVO1_PIN);
|
||||||
#endif
|
#endif
|
||||||
#if (NUM_SERVOS >= 3) && defined (SERVO2_PIN) && (SERVO2_PIN > -1)
|
#if (NUM_SERVOS >= 3) && (SERVO2_PIN > 0)
|
||||||
servos[2].attach(SERVO2_PIN);
|
servos[2].attach(SERVO2_PIN);
|
||||||
#endif
|
#endif
|
||||||
#if (NUM_SERVOS >= 4) && defined (SERVO3_PIN) && (SERVO3_PIN > -1)
|
#if (NUM_SERVOS >= 4) && (SERVO3_PIN > 0)
|
||||||
servos[3].attach(SERVO3_PIN);
|
servos[3].attach(SERVO3_PIN);
|
||||||
#endif
|
#endif
|
||||||
#if (NUM_SERVOS >= 5)
|
#if (NUM_SERVOS >= 5)
|
||||||
@ -673,7 +673,7 @@ static void axis_is_at_home(int axis) {
|
|||||||
|
|
||||||
static void homeaxis(int axis) {
|
static void homeaxis(int axis) {
|
||||||
#define HOMEAXIS_DO(LETTER) \
|
#define HOMEAXIS_DO(LETTER) \
|
||||||
((LETTER##_MIN_PIN > -1 && LETTER##_HOME_DIR==-1) || (LETTER##_MAX_PIN > -1 && LETTER##_HOME_DIR==1))
|
((LETTER##_MIN_PIN > 0 && LETTER##_HOME_DIR==-1) || (LETTER##_MAX_PIN > 0 && LETTER##_HOME_DIR==1))
|
||||||
|
|
||||||
if (axis==X_AXIS ? HOMEAXIS_DO(X) :
|
if (axis==X_AXIS ? HOMEAXIS_DO(X) :
|
||||||
axis==Y_AXIS ? HOMEAXIS_DO(Y) :
|
axis==Y_AXIS ? HOMEAXIS_DO(Y) :
|
||||||
@ -911,13 +911,13 @@ void process_commands()
|
|||||||
previous_millis_cmd = millis();
|
previous_millis_cmd = millis();
|
||||||
if (codenum > 0){
|
if (codenum > 0){
|
||||||
codenum += millis(); // keep track of when we started waiting
|
codenum += millis(); // keep track of when we started waiting
|
||||||
while(millis() < codenum && !LCD_CLICKED){
|
while(millis() < codenum && !lcd_clicked()){
|
||||||
manage_heater();
|
manage_heater();
|
||||||
manage_inactivity();
|
manage_inactivity();
|
||||||
lcd_update();
|
lcd_update();
|
||||||
}
|
}
|
||||||
}else{
|
}else{
|
||||||
while(!LCD_CLICKED){
|
while(!lcd_clicked()){
|
||||||
manage_heater();
|
manage_heater();
|
||||||
manage_inactivity();
|
manage_inactivity();
|
||||||
lcd_update();
|
lcd_update();
|
||||||
@ -1062,12 +1062,12 @@ void process_commands()
|
|||||||
if(setTargetedHotend(105)){
|
if(setTargetedHotend(105)){
|
||||||
break;
|
break;
|
||||||
}
|
}
|
||||||
#if (TEMP_0_PIN > -1)
|
#if (TEMP_0_PIN > 0)
|
||||||
SERIAL_PROTOCOLPGM("ok T:");
|
SERIAL_PROTOCOLPGM("ok T:");
|
||||||
SERIAL_PROTOCOL_F(degHotend(tmp_extruder),1);
|
SERIAL_PROTOCOL_F(degHotend(tmp_extruder),1);
|
||||||
SERIAL_PROTOCOLPGM(" /");
|
SERIAL_PROTOCOLPGM(" /");
|
||||||
SERIAL_PROTOCOL_F(degTargetHotend(tmp_extruder),1);
|
SERIAL_PROTOCOL_F(degTargetHotend(tmp_extruder),1);
|
||||||
#if TEMP_BED_PIN > -1
|
#if TEMP_BED_PIN > 0
|
||||||
SERIAL_PROTOCOLPGM(" B:");
|
SERIAL_PROTOCOLPGM(" B:");
|
||||||
SERIAL_PROTOCOL_F(degBed(),1);
|
SERIAL_PROTOCOL_F(degBed(),1);
|
||||||
SERIAL_PROTOCOLPGM(" /");
|
SERIAL_PROTOCOLPGM(" /");
|
||||||
@ -1165,7 +1165,7 @@ void process_commands()
|
|||||||
}
|
}
|
||||||
break;
|
break;
|
||||||
case 190: // M190 - Wait for bed heater to reach target.
|
case 190: // M190 - Wait for bed heater to reach target.
|
||||||
#if TEMP_BED_PIN > -1
|
#if TEMP_BED_PIN > 0
|
||||||
LCD_MESSAGEPGM(MSG_BED_HEATING);
|
LCD_MESSAGEPGM(MSG_BED_HEATING);
|
||||||
if (code_seen('S')) setTargetBed(code_value());
|
if (code_seen('S')) setTargetBed(code_value());
|
||||||
codenum = millis();
|
codenum = millis();
|
||||||
@ -1192,7 +1192,7 @@ void process_commands()
|
|||||||
#endif
|
#endif
|
||||||
break;
|
break;
|
||||||
|
|
||||||
#if FAN_PIN > -1
|
#if FAN_PIN > 0
|
||||||
case 106: //M106 Fan On
|
case 106: //M106 Fan On
|
||||||
if (code_seen('S')){
|
if (code_seen('S')){
|
||||||
fanSpeed=constrain(code_value(),0,255);
|
fanSpeed=constrain(code_value(),0,255);
|
||||||
@ -1207,7 +1207,7 @@ void process_commands()
|
|||||||
#endif //FAN_PIN
|
#endif //FAN_PIN
|
||||||
#ifdef BARICUDA
|
#ifdef BARICUDA
|
||||||
// PWM for HEATER_1_PIN
|
// PWM for HEATER_1_PIN
|
||||||
#if HEATER_1_PIN > -1
|
#if HEATER_1_PIN > 0
|
||||||
case 126: //M126 valve open
|
case 126: //M126 valve open
|
||||||
if (code_seen('S')){
|
if (code_seen('S')){
|
||||||
ValvePressure=constrain(code_value(),0,255);
|
ValvePressure=constrain(code_value(),0,255);
|
||||||
@ -1222,7 +1222,7 @@ void process_commands()
|
|||||||
#endif //HEATER_1_PIN
|
#endif //HEATER_1_PIN
|
||||||
|
|
||||||
// PWM for HEATER_2_PIN
|
// PWM for HEATER_2_PIN
|
||||||
#if HEATER_2_PIN > -1
|
#if HEATER_2_PIN > 0
|
||||||
case 128: //M128 valve open
|
case 128: //M128 valve open
|
||||||
if (code_seen('S')){
|
if (code_seen('S')){
|
||||||
EtoPPressure=constrain(code_value(),0,255);
|
EtoPPressure=constrain(code_value(),0,255);
|
||||||
@ -1237,7 +1237,7 @@ void process_commands()
|
|||||||
#endif //HEATER_2_PIN
|
#endif //HEATER_2_PIN
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#if (PS_ON_PIN > -1)
|
#if (PS_ON_PIN > 0)
|
||||||
case 80: // M80 - ATX Power On
|
case 80: // M80 - ATX Power On
|
||||||
SET_OUTPUT(PS_ON_PIN); //GND
|
SET_OUTPUT(PS_ON_PIN); //GND
|
||||||
WRITE(PS_ON_PIN, PS_ON_AWAKE);
|
WRITE(PS_ON_PIN, PS_ON_AWAKE);
|
||||||
@ -1246,10 +1246,10 @@ void process_commands()
|
|||||||
|
|
||||||
case 81: // M81 - ATX Power Off
|
case 81: // M81 - ATX Power Off
|
||||||
|
|
||||||
#if defined SUICIDE_PIN && SUICIDE_PIN > -1
|
#if defined SUICIDE_PIN && SUICIDE_PIN > 0
|
||||||
st_synchronize();
|
st_synchronize();
|
||||||
suicide();
|
suicide();
|
||||||
#elif (PS_ON_PIN > -1)
|
#elif (PS_ON_PIN > 0)
|
||||||
SET_OUTPUT(PS_ON_PIN);
|
SET_OUTPUT(PS_ON_PIN);
|
||||||
WRITE(PS_ON_PIN, PS_ON_ASLEEP);
|
WRITE(PS_ON_PIN, PS_ON_ASLEEP);
|
||||||
#endif
|
#endif
|
||||||
@ -1354,27 +1354,27 @@ void process_commands()
|
|||||||
break;
|
break;
|
||||||
case 119: // M119
|
case 119: // M119
|
||||||
SERIAL_PROTOCOLLN(MSG_M119_REPORT);
|
SERIAL_PROTOCOLLN(MSG_M119_REPORT);
|
||||||
#if (X_MIN_PIN > -1)
|
#if (X_MIN_PIN > 0)
|
||||||
SERIAL_PROTOCOLPGM(MSG_X_MIN);
|
SERIAL_PROTOCOLPGM(MSG_X_MIN);
|
||||||
SERIAL_PROTOCOLLN(((READ(X_MIN_PIN)^X_ENDSTOPS_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN));
|
SERIAL_PROTOCOLLN(((READ(X_MIN_PIN)^X_ENDSTOPS_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN));
|
||||||
#endif
|
#endif
|
||||||
#if (X_MAX_PIN > -1)
|
#if (X_MAX_PIN > 0)
|
||||||
SERIAL_PROTOCOLPGM(MSG_X_MAX);
|
SERIAL_PROTOCOLPGM(MSG_X_MAX);
|
||||||
SERIAL_PROTOCOLLN(((READ(X_MAX_PIN)^X_ENDSTOPS_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN));
|
SERIAL_PROTOCOLLN(((READ(X_MAX_PIN)^X_ENDSTOPS_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN));
|
||||||
#endif
|
#endif
|
||||||
#if (Y_MIN_PIN > -1)
|
#if (Y_MIN_PIN > 0)
|
||||||
SERIAL_PROTOCOLPGM(MSG_Y_MIN);
|
SERIAL_PROTOCOLPGM(MSG_Y_MIN);
|
||||||
SERIAL_PROTOCOLLN(((READ(Y_MIN_PIN)^Y_ENDSTOPS_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN));
|
SERIAL_PROTOCOLLN(((READ(Y_MIN_PIN)^Y_ENDSTOPS_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN));
|
||||||
#endif
|
#endif
|
||||||
#if (Y_MAX_PIN > -1)
|
#if (Y_MAX_PIN > 0)
|
||||||
SERIAL_PROTOCOLPGM(MSG_Y_MAX);
|
SERIAL_PROTOCOLPGM(MSG_Y_MAX);
|
||||||
SERIAL_PROTOCOLLN(((READ(Y_MAX_PIN)^Y_ENDSTOPS_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN));
|
SERIAL_PROTOCOLLN(((READ(Y_MAX_PIN)^Y_ENDSTOPS_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN));
|
||||||
#endif
|
#endif
|
||||||
#if (Z_MIN_PIN > -1)
|
#if (Z_MIN_PIN > 0)
|
||||||
SERIAL_PROTOCOLPGM(MSG_Z_MIN);
|
SERIAL_PROTOCOLPGM(MSG_Z_MIN);
|
||||||
SERIAL_PROTOCOLLN(((READ(Z_MIN_PIN)^Z_ENDSTOPS_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN));
|
SERIAL_PROTOCOLLN(((READ(Z_MIN_PIN)^Z_ENDSTOPS_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN));
|
||||||
#endif
|
#endif
|
||||||
#if (Z_MAX_PIN > -1)
|
#if (Z_MAX_PIN > 0)
|
||||||
SERIAL_PROTOCOLPGM(MSG_Z_MAX);
|
SERIAL_PROTOCOLPGM(MSG_Z_MAX);
|
||||||
SERIAL_PROTOCOLLN(((READ(Z_MAX_PIN)^Z_ENDSTOPS_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN));
|
SERIAL_PROTOCOLLN(((READ(Z_MAX_PIN)^Z_ENDSTOPS_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN));
|
||||||
#endif
|
#endif
|
||||||
@ -1514,7 +1514,7 @@ void process_commands()
|
|||||||
}
|
}
|
||||||
break;
|
break;
|
||||||
|
|
||||||
#if (defined NUM_SERVOS) && (NUM_SERVOS > 0)
|
#if NUM_SERVOS > 0
|
||||||
case 280: // M280 - set servo position absolute. P: servo index, S: angle or microseconds
|
case 280: // M280 - set servo position absolute. P: servo index, S: angle or microseconds
|
||||||
{
|
{
|
||||||
int servo_index = -1;
|
int servo_index = -1;
|
||||||
@ -1545,16 +1545,20 @@ void process_commands()
|
|||||||
break;
|
break;
|
||||||
#endif // NUM_SERVOS > 0
|
#endif // NUM_SERVOS > 0
|
||||||
|
|
||||||
#if defined(LARGE_FLASH) && LARGE_FLASH == true && defined(BEEPER) && BEEPER > -1
|
#if LARGE_FLASH == true && ( BEEPER > 0 || defined(ULTRALCD) )
|
||||||
case 300: // M300
|
case 300: // M300
|
||||||
{
|
{
|
||||||
int beepS = 1;
|
int beepS = 400;
|
||||||
int beepP = 1000;
|
int beepP = 1000;
|
||||||
if(code_seen('S')) beepS = code_value();
|
if(code_seen('S')) beepS = code_value();
|
||||||
if(code_seen('P')) beepP = code_value();
|
if(code_seen('P')) beepP = code_value();
|
||||||
|
#if BEEPER > 0
|
||||||
tone(BEEPER, beepS);
|
tone(BEEPER, beepS);
|
||||||
delay(beepP);
|
delay(beepP);
|
||||||
noTone(BEEPER);
|
noTone(BEEPER);
|
||||||
|
#elif defined(ULTRALCD)
|
||||||
|
lcd_buzz(beepS, beepP);
|
||||||
|
#endif
|
||||||
}
|
}
|
||||||
break;
|
break;
|
||||||
#endif // M300
|
#endif // M300
|
||||||
@ -1609,7 +1613,7 @@ void process_commands()
|
|||||||
case 240: // M240 Triggers a camera by emulating a Canon RC-1 : http://www.doc-diy.net/photo/rc-1_hacked/
|
case 240: // M240 Triggers a camera by emulating a Canon RC-1 : http://www.doc-diy.net/photo/rc-1_hacked/
|
||||||
{
|
{
|
||||||
#ifdef PHOTOGRAPH_PIN
|
#ifdef PHOTOGRAPH_PIN
|
||||||
#if (PHOTOGRAPH_PIN > -1)
|
#if (PHOTOGRAPH_PIN > 0)
|
||||||
const uint8_t NUM_PULSES=16;
|
const uint8_t NUM_PULSES=16;
|
||||||
const float PULSE_LENGTH=0.01524;
|
const float PULSE_LENGTH=0.01524;
|
||||||
for(int i=0; i < NUM_PULSES; i++) {
|
for(int i=0; i < NUM_PULSES; i++) {
|
||||||
@ -1765,24 +1769,25 @@ void process_commands()
|
|||||||
delay(100);
|
delay(100);
|
||||||
LCD_ALERTMESSAGEPGM(MSG_FILAMENTCHANGE);
|
LCD_ALERTMESSAGEPGM(MSG_FILAMENTCHANGE);
|
||||||
uint8_t cnt=0;
|
uint8_t cnt=0;
|
||||||
while(!LCD_CLICKED){
|
while(!lcd_clicked()){
|
||||||
cnt++;
|
cnt++;
|
||||||
manage_heater();
|
manage_heater();
|
||||||
manage_inactivity();
|
manage_inactivity();
|
||||||
lcd_update();
|
lcd_update();
|
||||||
|
|
||||||
#if BEEPER > -1
|
|
||||||
if(cnt==0)
|
if(cnt==0)
|
||||||
{
|
{
|
||||||
|
#if BEEPER > 0
|
||||||
SET_OUTPUT(BEEPER);
|
SET_OUTPUT(BEEPER);
|
||||||
|
|
||||||
WRITE(BEEPER,HIGH);
|
WRITE(BEEPER,HIGH);
|
||||||
delay(3);
|
delay(3);
|
||||||
WRITE(BEEPER,LOW);
|
WRITE(BEEPER,LOW);
|
||||||
delay(3);
|
delay(3);
|
||||||
}
|
#else
|
||||||
|
lcd_buzz(1000/6,100);
|
||||||
#endif
|
#endif
|
||||||
}
|
}
|
||||||
|
}
|
||||||
|
|
||||||
//return to normal
|
//return to normal
|
||||||
if(code_seen('L'))
|
if(code_seen('L'))
|
||||||
@ -1806,7 +1811,7 @@ void process_commands()
|
|||||||
#endif //FILAMENTCHANGEENABLE
|
#endif //FILAMENTCHANGEENABLE
|
||||||
case 907: // M907 Set digital trimpot motor current using axis codes.
|
case 907: // M907 Set digital trimpot motor current using axis codes.
|
||||||
{
|
{
|
||||||
#if DIGIPOTSS_PIN > -1
|
#if DIGIPOTSS_PIN > 0
|
||||||
for(int i=0;i<NUM_AXIS;i++) if(code_seen(axis_codes[i])) digipot_current(i,code_value());
|
for(int i=0;i<NUM_AXIS;i++) if(code_seen(axis_codes[i])) digipot_current(i,code_value());
|
||||||
if(code_seen('B')) digipot_current(4,code_value());
|
if(code_seen('B')) digipot_current(4,code_value());
|
||||||
if(code_seen('S')) for(int i=0;i<=4;i++) digipot_current(i,code_value());
|
if(code_seen('S')) for(int i=0;i<=4;i++) digipot_current(i,code_value());
|
||||||
@ -1815,7 +1820,7 @@ void process_commands()
|
|||||||
break;
|
break;
|
||||||
case 908: // M908 Control digital trimpot directly.
|
case 908: // M908 Control digital trimpot directly.
|
||||||
{
|
{
|
||||||
#if DIGIPOTSS_PIN > -1
|
#if DIGIPOTSS_PIN > 0
|
||||||
uint8_t channel,current;
|
uint8_t channel,current;
|
||||||
if(code_seen('P')) channel=code_value();
|
if(code_seen('P')) channel=code_value();
|
||||||
if(code_seen('S')) current=code_value();
|
if(code_seen('S')) current=code_value();
|
||||||
@ -1825,7 +1830,7 @@ void process_commands()
|
|||||||
break;
|
break;
|
||||||
case 350: // M350 Set microstepping mode. Warning: Steps per unit remains unchanged. S code sets stepping mode for all drivers.
|
case 350: // M350 Set microstepping mode. Warning: Steps per unit remains unchanged. S code sets stepping mode for all drivers.
|
||||||
{
|
{
|
||||||
#if X_MS1_PIN > -1
|
#if X_MS1_PIN > 0
|
||||||
if(code_seen('S')) for(int i=0;i<=4;i++) microstep_mode(i,code_value());
|
if(code_seen('S')) for(int i=0;i<=4;i++) microstep_mode(i,code_value());
|
||||||
for(int i=0;i<NUM_AXIS;i++) if(code_seen(axis_codes[i])) microstep_mode(i,(uint8_t)code_value());
|
for(int i=0;i<NUM_AXIS;i++) if(code_seen(axis_codes[i])) microstep_mode(i,(uint8_t)code_value());
|
||||||
if(code_seen('B')) microstep_mode(4,code_value());
|
if(code_seen('B')) microstep_mode(4,code_value());
|
||||||
@ -1835,7 +1840,7 @@ void process_commands()
|
|||||||
break;
|
break;
|
||||||
case 351: // M351 Toggle MS1 MS2 pins directly, S# determines MS1 or MS2, X# sets the pin high/low.
|
case 351: // M351 Toggle MS1 MS2 pins directly, S# determines MS1 or MS2, X# sets the pin high/low.
|
||||||
{
|
{
|
||||||
#if X_MS1_PIN > -1
|
#if X_MS1_PIN > 0
|
||||||
if(code_seen('S')) switch((int)code_value())
|
if(code_seen('S')) switch((int)code_value())
|
||||||
{
|
{
|
||||||
case 1:
|
case 1:
|
||||||
@ -2173,7 +2178,7 @@ void kill()
|
|||||||
disable_e1();
|
disable_e1();
|
||||||
disable_e2();
|
disable_e2();
|
||||||
|
|
||||||
if(PS_ON_PIN > -1) pinMode(PS_ON_PIN,INPUT);
|
if(PS_ON_PIN > 0) pinMode(PS_ON_PIN,INPUT);
|
||||||
SERIAL_ERROR_START;
|
SERIAL_ERROR_START;
|
||||||
SERIAL_ERRORLNPGM(MSG_ERR_KILLED);
|
SERIAL_ERRORLNPGM(MSG_ERR_KILLED);
|
||||||
LCD_ALERTMESSAGEPGM(MSG_KILLED);
|
LCD_ALERTMESSAGEPGM(MSG_KILLED);
|
||||||
|
115
Marlin/pins.h
115
Marlin/pins.h
@ -291,14 +291,6 @@
|
|||||||
#define BTN_EN2 10
|
#define BTN_EN2 10
|
||||||
#define BTN_ENC 12 //the click
|
#define BTN_ENC 12 //the click
|
||||||
|
|
||||||
#define BLEN_C 2
|
|
||||||
#define BLEN_B 1
|
|
||||||
#define BLEN_A 0
|
|
||||||
|
|
||||||
#define encrot0 0
|
|
||||||
#define encrot1 2
|
|
||||||
#define encrot2 3
|
|
||||||
#define encrot3 1
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
/****************************************************************************************
|
/****************************************************************************************
|
||||||
@ -391,16 +383,6 @@
|
|||||||
#ifdef ULTRA_LCD
|
#ifdef ULTRA_LCD
|
||||||
|
|
||||||
#ifdef NEWPANEL
|
#ifdef NEWPANEL
|
||||||
//encoder rotation values
|
|
||||||
#define encrot0 0
|
|
||||||
#define encrot1 2
|
|
||||||
#define encrot2 3
|
|
||||||
#define encrot3 1
|
|
||||||
|
|
||||||
#define BLEN_A 0
|
|
||||||
#define BLEN_B 1
|
|
||||||
#define BLEN_C 2
|
|
||||||
|
|
||||||
#define LCD_PINS_RS 16
|
#define LCD_PINS_RS 16
|
||||||
#define LCD_PINS_ENABLE 17
|
#define LCD_PINS_ENABLE 17
|
||||||
#define LCD_PINS_D4 23
|
#define LCD_PINS_D4 23
|
||||||
@ -428,15 +410,6 @@
|
|||||||
#define SHIFT_OUT 40 // shift register
|
#define SHIFT_OUT 40 // shift register
|
||||||
#define SHIFT_CLK 44 // shift register
|
#define SHIFT_CLK 44 // shift register
|
||||||
#define SHIFT_LD 42 // shift register
|
#define SHIFT_LD 42 // shift register
|
||||||
// define register bit values, don't change it
|
|
||||||
#define BLEN_REPRAPWORLD_KEYPAD_F3 0
|
|
||||||
#define BLEN_REPRAPWORLD_KEYPAD_F2 1
|
|
||||||
#define BLEN_REPRAPWORLD_KEYPAD_F1 2
|
|
||||||
#define BLEN_REPRAPWORLD_KEYPAD_UP 3
|
|
||||||
#define BLEN_REPRAPWORLD_KEYPAD_RIGHT 4
|
|
||||||
#define BLEN_REPRAPWORLD_KEYPAD_MIDDLE 5
|
|
||||||
#define BLEN_REPRAPWORLD_KEYPAD_DOWN 6
|
|
||||||
#define BLEN_REPRAPWORLD_KEYPAD_LEFT 7
|
|
||||||
#else
|
#else
|
||||||
#define BTN_EN1 37
|
#define BTN_EN1 37
|
||||||
#define BTN_EN2 35
|
#define BTN_EN2 35
|
||||||
@ -452,7 +425,7 @@
|
|||||||
|
|
||||||
#else //old style panel with shift register
|
#else //old style panel with shift register
|
||||||
//arduino pin witch triggers an piezzo beeper
|
//arduino pin witch triggers an piezzo beeper
|
||||||
#define BEEPER 33 No Beeper added
|
#define BEEPER 33 // No Beeper added
|
||||||
|
|
||||||
//buttons are attached to a shift register
|
//buttons are attached to a shift register
|
||||||
// Not wired this yet
|
// Not wired this yet
|
||||||
@ -467,25 +440,6 @@
|
|||||||
#define LCD_PINS_D5 25
|
#define LCD_PINS_D5 25
|
||||||
#define LCD_PINS_D6 27
|
#define LCD_PINS_D6 27
|
||||||
#define LCD_PINS_D7 29
|
#define LCD_PINS_D7 29
|
||||||
|
|
||||||
//encoder rotation values
|
|
||||||
#define encrot0 0
|
|
||||||
#define encrot1 2
|
|
||||||
#define encrot2 3
|
|
||||||
#define encrot3 1
|
|
||||||
|
|
||||||
|
|
||||||
//bits in the shift register that carry the buttons for:
|
|
||||||
// left up center down right red
|
|
||||||
#define BL_LE 7
|
|
||||||
#define BL_UP 6
|
|
||||||
#define BL_MI 5
|
|
||||||
#define BL_DW 4
|
|
||||||
#define BL_RI 3
|
|
||||||
#define BL_ST 2
|
|
||||||
|
|
||||||
#define BLEN_B 1
|
|
||||||
#define BLEN_A 0
|
|
||||||
#endif
|
#endif
|
||||||
#endif //ULTRA_LCD
|
#endif //ULTRA_LCD
|
||||||
|
|
||||||
@ -779,23 +733,12 @@
|
|||||||
#define LCD_PINS_D7 27
|
#define LCD_PINS_D7 27
|
||||||
#endif
|
#endif
|
||||||
//The encoder and click button
|
//The encoder and click button
|
||||||
#define BTN_EN1 11 //must be a hardware interrupt pin
|
#define BTN_EN1 11
|
||||||
#define BTN_EN2 10 //must be hardware interrupt pin
|
#define BTN_EN2 10
|
||||||
#define BTN_ENC 16 //the switch
|
#define BTN_ENC 16 //the switch
|
||||||
//not connected to a pin
|
//not connected to a pin
|
||||||
#define SDCARDDETECT -1
|
#define SDCARDDETECT -1
|
||||||
|
|
||||||
//from the same bit in the RAMPS Newpanel define
|
|
||||||
//encoder rotation values
|
|
||||||
#define encrot0 0
|
|
||||||
#define encrot1 2
|
|
||||||
#define encrot2 3
|
|
||||||
#define encrot3 1
|
|
||||||
|
|
||||||
#define BLEN_C 2
|
|
||||||
#define BLEN_B 1
|
|
||||||
#define BLEN_A 0
|
|
||||||
|
|
||||||
#endif //Newpanel
|
#endif //Newpanel
|
||||||
#endif //Ultipanel
|
#endif //Ultipanel
|
||||||
|
|
||||||
@ -880,17 +823,8 @@
|
|||||||
#define BTN_EN2 42
|
#define BTN_EN2 42
|
||||||
#define BTN_ENC 19 //the click
|
#define BTN_ENC 19 //the click
|
||||||
|
|
||||||
#define BLEN_C 2
|
|
||||||
#define BLEN_B 1
|
|
||||||
#define BLEN_A 0
|
|
||||||
|
|
||||||
#define SDCARDDETECT 38
|
#define SDCARDDETECT 38
|
||||||
|
|
||||||
//encoder rotation values
|
|
||||||
#define encrot0 0
|
|
||||||
#define encrot1 2
|
|
||||||
#define encrot2 3
|
|
||||||
#define encrot3 1
|
|
||||||
#else //old style panel with shift register
|
#else //old style panel with shift register
|
||||||
//arduino pin witch triggers an piezzo beeper
|
//arduino pin witch triggers an piezzo beeper
|
||||||
#define BEEPER 18
|
#define BEEPER 18
|
||||||
@ -908,32 +842,7 @@
|
|||||||
#define LCD_PINS_D6 20
|
#define LCD_PINS_D6 20
|
||||||
#define LCD_PINS_D7 19
|
#define LCD_PINS_D7 19
|
||||||
|
|
||||||
//encoder rotation values
|
|
||||||
#ifndef ULTIMAKERCONTROLLER
|
|
||||||
#define encrot0 0
|
|
||||||
#define encrot1 2
|
|
||||||
#define encrot2 3
|
|
||||||
#define encrot3 1
|
|
||||||
#else
|
|
||||||
#define encrot0 0
|
|
||||||
#define encrot1 1
|
|
||||||
#define encrot2 3
|
|
||||||
#define encrot3 2
|
|
||||||
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#define SDCARDDETECT -1
|
#define SDCARDDETECT -1
|
||||||
//bits in the shift register that carry the buttons for:
|
|
||||||
// left up center down right red
|
|
||||||
#define BL_LE 7
|
|
||||||
#define BL_UP 6
|
|
||||||
#define BL_MI 5
|
|
||||||
#define BL_DW 4
|
|
||||||
#define BL_RI 3
|
|
||||||
#define BL_ST 2
|
|
||||||
|
|
||||||
#define BLEN_B 1
|
|
||||||
#define BLEN_A 0
|
|
||||||
#endif
|
#endif
|
||||||
#endif //ULTRA_LCD
|
#endif //ULTRA_LCD
|
||||||
|
|
||||||
@ -1122,14 +1031,6 @@
|
|||||||
#define BTN_EN1 11
|
#define BTN_EN1 11
|
||||||
#define BTN_EN2 12
|
#define BTN_EN2 12
|
||||||
#define BTN_ENC 43
|
#define BTN_ENC 43
|
||||||
//encoder rotation values
|
|
||||||
#define BLEN_C 2
|
|
||||||
#define BLEN_B 1
|
|
||||||
#define BLEN_A 0
|
|
||||||
#define encrot0 0
|
|
||||||
#define encrot1 2
|
|
||||||
#define encrot2 3
|
|
||||||
#define encrot3 1
|
|
||||||
|
|
||||||
#endif //MOTHERBOARD==80
|
#endif //MOTHERBOARD==80
|
||||||
|
|
||||||
@ -1637,17 +1538,7 @@
|
|||||||
#define BTN_EN2 64
|
#define BTN_EN2 64
|
||||||
#define BTN_ENC 43 //the click
|
#define BTN_ENC 43 //the click
|
||||||
|
|
||||||
#define BLEN_C 2
|
|
||||||
#define BLEN_B 1
|
|
||||||
#define BLEN_A 0
|
|
||||||
|
|
||||||
#define SDCARDDETECT -1 // Ramps does not use this port
|
#define SDCARDDETECT -1 // Ramps does not use this port
|
||||||
|
|
||||||
//encoder rotation values
|
|
||||||
#define encrot0 0
|
|
||||||
#define encrot1 2
|
|
||||||
#define encrot2 3
|
|
||||||
#define encrot3 1
|
|
||||||
#endif
|
#endif
|
||||||
#endif //ULTRA_LCD
|
#endif //ULTRA_LCD
|
||||||
|
|
||||||
|
@ -76,7 +76,11 @@ static void menu_action_setting_edit_callback_float51(const char* pstr, float* p
|
|||||||
static void menu_action_setting_edit_callback_float52(const char* pstr, float* ptr, float minValue, float maxValue, menuFunc_t callbackFunc);
|
static void menu_action_setting_edit_callback_float52(const char* pstr, float* ptr, float minValue, float maxValue, menuFunc_t callbackFunc);
|
||||||
static void menu_action_setting_edit_callback_long5(const char* pstr, unsigned long* ptr, unsigned long minValue, unsigned long maxValue, menuFunc_t callbackFunc);
|
static void menu_action_setting_edit_callback_long5(const char* pstr, unsigned long* ptr, unsigned long minValue, unsigned long maxValue, menuFunc_t callbackFunc);
|
||||||
|
|
||||||
|
#if !defined(LCD_I2C_VIKI)
|
||||||
#define ENCODER_STEPS_PER_MENU_ITEM 5
|
#define ENCODER_STEPS_PER_MENU_ITEM 5
|
||||||
|
#else
|
||||||
|
#define ENCODER_STEPS_PER_MENU_ITEM 2 // VIKI LCD rotary encoder uses a different number of steps per rotation
|
||||||
|
#endif
|
||||||
|
|
||||||
/* Helper macros for menus */
|
/* Helper macros for menus */
|
||||||
#define START_MENU() do { \
|
#define START_MENU() do { \
|
||||||
@ -112,15 +116,18 @@ static void menu_action_setting_edit_callback_long5(const char* pstr, unsigned l
|
|||||||
} } while(0)
|
} } while(0)
|
||||||
|
|
||||||
/** Used variables to keep track of the menu */
|
/** Used variables to keep track of the menu */
|
||||||
|
#ifndef REPRAPWORLD_KEYPAD
|
||||||
volatile uint8_t buttons;//Contains the bits of the currently pressed buttons.
|
volatile uint8_t buttons;//Contains the bits of the currently pressed buttons.
|
||||||
volatile uint8_t buttons_reprapworld_keypad; // to store the reprapworld_keypad shiftregister values
|
#else
|
||||||
|
volatile uint16_t buttons;//Contains the bits of the currently pressed buttons (extended).
|
||||||
|
#endif
|
||||||
|
|
||||||
uint8_t currentMenuViewOffset; /* scroll offset in the current menu */
|
uint8_t currentMenuViewOffset; /* scroll offset in the current menu */
|
||||||
uint32_t blocking_enc;
|
uint32_t blocking_enc;
|
||||||
uint8_t lastEncoderBits;
|
uint8_t lastEncoderBits;
|
||||||
int8_t encoderDiff; /* encoderDiff is updated from interrupt context and added to encoderPosition every LCD update */
|
int8_t encoderDiff; /* encoderDiff is updated from interrupt context and added to encoderPosition every LCD update */
|
||||||
uint32_t encoderPosition;
|
uint32_t encoderPosition;
|
||||||
#if (SDCARDDETECT > -1)
|
#if (SDCARDDETECT > 0)
|
||||||
bool lcd_oldcardstatus;
|
bool lcd_oldcardstatus;
|
||||||
#endif
|
#endif
|
||||||
#endif//ULTIPANEL
|
#endif//ULTIPANEL
|
||||||
@ -775,11 +782,13 @@ void lcd_init()
|
|||||||
#ifdef NEWPANEL
|
#ifdef NEWPANEL
|
||||||
pinMode(BTN_EN1,INPUT);
|
pinMode(BTN_EN1,INPUT);
|
||||||
pinMode(BTN_EN2,INPUT);
|
pinMode(BTN_EN2,INPUT);
|
||||||
pinMode(BTN_ENC,INPUT);
|
|
||||||
pinMode(SDCARDDETECT,INPUT);
|
pinMode(SDCARDDETECT,INPUT);
|
||||||
WRITE(BTN_EN1,HIGH);
|
WRITE(BTN_EN1,HIGH);
|
||||||
WRITE(BTN_EN2,HIGH);
|
WRITE(BTN_EN2,HIGH);
|
||||||
|
#if BTN_ENC > 0
|
||||||
|
pinMode(BTN_ENC,INPUT);
|
||||||
WRITE(BTN_ENC,HIGH);
|
WRITE(BTN_ENC,HIGH);
|
||||||
|
#endif
|
||||||
#ifdef REPRAPWORLD_KEYPAD
|
#ifdef REPRAPWORLD_KEYPAD
|
||||||
pinMode(SHIFT_CLK,OUTPUT);
|
pinMode(SHIFT_CLK,OUTPUT);
|
||||||
pinMode(SHIFT_LD,OUTPUT);
|
pinMode(SHIFT_LD,OUTPUT);
|
||||||
@ -796,12 +805,14 @@ void lcd_init()
|
|||||||
WRITE(SHIFT_LD,HIGH);
|
WRITE(SHIFT_LD,HIGH);
|
||||||
WRITE(SHIFT_EN,LOW);
|
WRITE(SHIFT_EN,LOW);
|
||||||
#endif//!NEWPANEL
|
#endif//!NEWPANEL
|
||||||
#if (SDCARDDETECT > -1)
|
#if (SDCARDDETECT > 0)
|
||||||
WRITE(SDCARDDETECT, HIGH);
|
WRITE(SDCARDDETECT, HIGH);
|
||||||
lcd_oldcardstatus = IS_SD_INSERTED;
|
lcd_oldcardstatus = IS_SD_INSERTED;
|
||||||
#endif//(SDCARDDETECT > -1)
|
#endif//(SDCARDDETECT > 0)
|
||||||
lcd_buttons_update();
|
lcd_buttons_update();
|
||||||
|
#ifdef ULTIPANEL
|
||||||
encoderDiff = 0;
|
encoderDiff = 0;
|
||||||
|
#endif
|
||||||
}
|
}
|
||||||
|
|
||||||
void lcd_update()
|
void lcd_update()
|
||||||
@ -810,7 +821,11 @@ void lcd_update()
|
|||||||
|
|
||||||
lcd_buttons_update();
|
lcd_buttons_update();
|
||||||
|
|
||||||
#if (SDCARDDETECT > -1)
|
#ifdef LCD_HAS_SLOW_BUTTONS
|
||||||
|
buttons |= lcd_implementation_read_slow_buttons(); // buttons which take too long to read in interrupt context
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if (SDCARDDETECT > 0)
|
||||||
if((IS_SD_INSERTED != lcd_oldcardstatus))
|
if((IS_SD_INSERTED != lcd_oldcardstatus))
|
||||||
{
|
{
|
||||||
lcdDrawUpdate = 2;
|
lcdDrawUpdate = 2;
|
||||||
@ -858,7 +873,8 @@ void lcd_update()
|
|||||||
#ifdef DOGLCD // Changes due to different driver architecture of the DOGM display
|
#ifdef DOGLCD // Changes due to different driver architecture of the DOGM display
|
||||||
blink++; // Variable for fan animation and alive dot
|
blink++; // Variable for fan animation and alive dot
|
||||||
u8g.firstPage();
|
u8g.firstPage();
|
||||||
do {
|
do
|
||||||
|
{
|
||||||
u8g.setFont(u8g_font_6x10_marlin);
|
u8g.setFont(u8g_font_6x10_marlin);
|
||||||
u8g.setPrintPos(125,0);
|
u8g.setPrintPos(125,0);
|
||||||
if (blink % 2) u8g.setColorIndex(1); else u8g.setColorIndex(0); // Set color for the alive dot
|
if (blink % 2) u8g.setColorIndex(1); else u8g.setColorIndex(0); // Set color for the alive dot
|
||||||
@ -871,6 +887,10 @@ void lcd_update()
|
|||||||
(*currentMenu)();
|
(*currentMenu)();
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
#ifdef LCD_HAS_STATUS_INDICATORS
|
||||||
|
lcd_implementation_update_indicators();
|
||||||
|
#endif
|
||||||
|
|
||||||
#ifdef ULTIPANEL
|
#ifdef ULTIPANEL
|
||||||
if(timeoutToStatus < millis() && currentMenu != lcd_status_screen)
|
if(timeoutToStatus < millis() && currentMenu != lcd_status_screen)
|
||||||
{
|
{
|
||||||
@ -921,9 +941,10 @@ void lcd_buttons_update()
|
|||||||
uint8_t newbutton=0;
|
uint8_t newbutton=0;
|
||||||
if(READ(BTN_EN1)==0) newbutton|=EN_A;
|
if(READ(BTN_EN1)==0) newbutton|=EN_A;
|
||||||
if(READ(BTN_EN2)==0) newbutton|=EN_B;
|
if(READ(BTN_EN2)==0) newbutton|=EN_B;
|
||||||
|
#if BTN_ENC > 0
|
||||||
if((blocking_enc<millis()) && (READ(BTN_ENC)==0))
|
if((blocking_enc<millis()) && (READ(BTN_ENC)==0))
|
||||||
newbutton |= EN_C;
|
newbutton |= EN_C;
|
||||||
buttons = newbutton;
|
#endif
|
||||||
#ifdef REPRAPWORLD_KEYPAD
|
#ifdef REPRAPWORLD_KEYPAD
|
||||||
// for the reprapworld_keypad
|
// for the reprapworld_keypad
|
||||||
uint8_t newbutton_reprapworld_keypad=0;
|
uint8_t newbutton_reprapworld_keypad=0;
|
||||||
@ -936,8 +957,9 @@ void lcd_buttons_update()
|
|||||||
WRITE(SHIFT_CLK,HIGH);
|
WRITE(SHIFT_CLK,HIGH);
|
||||||
WRITE(SHIFT_CLK,LOW);
|
WRITE(SHIFT_CLK,LOW);
|
||||||
}
|
}
|
||||||
buttons_reprapworld_keypad=~newbutton_reprapworld_keypad; //invert it, because a pressed switch produces a logical 0
|
newbutton |= ((~newbutton_reprapworld_keypad) << REPRAPWORLD_BTN_OFFSET); //invert it, because a pressed switch produces a logical 0
|
||||||
#endif
|
#endif
|
||||||
|
buttons = newbutton;
|
||||||
#else //read it from the shift register
|
#else //read it from the shift register
|
||||||
uint8_t newbutton=0;
|
uint8_t newbutton=0;
|
||||||
WRITE(SHIFT_LD,LOW);
|
WRITE(SHIFT_LD,LOW);
|
||||||
@ -992,6 +1014,18 @@ void lcd_buttons_update()
|
|||||||
}
|
}
|
||||||
lastEncoderBits = enc;
|
lastEncoderBits = enc;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
void lcd_buzz(long duration, uint16_t freq)
|
||||||
|
{
|
||||||
|
#ifdef LCD_USE_I2C_BUZZER
|
||||||
|
lcd.buzz(duration,freq);
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
|
||||||
|
bool lcd_clicked()
|
||||||
|
{
|
||||||
|
return LCD_CLICKED;
|
||||||
|
}
|
||||||
#endif//ULTIPANEL
|
#endif//ULTIPANEL
|
||||||
|
|
||||||
/********************************/
|
/********************************/
|
||||||
|
@ -22,10 +22,6 @@
|
|||||||
|
|
||||||
#ifdef ULTIPANEL
|
#ifdef ULTIPANEL
|
||||||
void lcd_buttons_update();
|
void lcd_buttons_update();
|
||||||
extern volatile uint8_t buttons; //the last checked buttons in a bit array.
|
|
||||||
#ifdef REPRAPWORLD_KEYPAD
|
|
||||||
extern volatile uint8_t buttons_reprapworld_keypad; // to store the keypad shiftregister values
|
|
||||||
#endif
|
|
||||||
#else
|
#else
|
||||||
FORCE_INLINE void lcd_buttons_update() {}
|
FORCE_INLINE void lcd_buttons_update() {}
|
||||||
#endif
|
#endif
|
||||||
@ -38,40 +34,8 @@
|
|||||||
extern int absPreheatHPBTemp;
|
extern int absPreheatHPBTemp;
|
||||||
extern int absPreheatFanSpeed;
|
extern int absPreheatFanSpeed;
|
||||||
|
|
||||||
#ifdef NEWPANEL
|
void lcd_buzz(long duration,uint16_t freq);
|
||||||
#define EN_C (1<<BLEN_C)
|
bool lcd_clicked();
|
||||||
#define EN_B (1<<BLEN_B)
|
|
||||||
#define EN_A (1<<BLEN_A)
|
|
||||||
|
|
||||||
#define LCD_CLICKED (buttons&EN_C)
|
|
||||||
#ifdef REPRAPWORLD_KEYPAD
|
|
||||||
#define EN_REPRAPWORLD_KEYPAD_F3 (1<<BLEN_REPRAPWORLD_KEYPAD_F3)
|
|
||||||
#define EN_REPRAPWORLD_KEYPAD_F2 (1<<BLEN_REPRAPWORLD_KEYPAD_F2)
|
|
||||||
#define EN_REPRAPWORLD_KEYPAD_F1 (1<<BLEN_REPRAPWORLD_KEYPAD_F1)
|
|
||||||
#define EN_REPRAPWORLD_KEYPAD_UP (1<<BLEN_REPRAPWORLD_KEYPAD_UP)
|
|
||||||
#define EN_REPRAPWORLD_KEYPAD_RIGHT (1<<BLEN_REPRAPWORLD_KEYPAD_RIGHT)
|
|
||||||
#define EN_REPRAPWORLD_KEYPAD_MIDDLE (1<<BLEN_REPRAPWORLD_KEYPAD_MIDDLE)
|
|
||||||
#define EN_REPRAPWORLD_KEYPAD_DOWN (1<<BLEN_REPRAPWORLD_KEYPAD_DOWN)
|
|
||||||
#define EN_REPRAPWORLD_KEYPAD_LEFT (1<<BLEN_REPRAPWORLD_KEYPAD_LEFT)
|
|
||||||
|
|
||||||
#define LCD_CLICKED ((buttons&EN_C) || (buttons_reprapworld_keypad&EN_REPRAPWORLD_KEYPAD_F1))
|
|
||||||
#define REPRAPWORLD_KEYPAD_MOVE_Y_DOWN (buttons_reprapworld_keypad&EN_REPRAPWORLD_KEYPAD_DOWN)
|
|
||||||
#define REPRAPWORLD_KEYPAD_MOVE_Y_UP (buttons_reprapworld_keypad&EN_REPRAPWORLD_KEYPAD_UP)
|
|
||||||
#define REPRAPWORLD_KEYPAD_MOVE_HOME (buttons_reprapworld_keypad&EN_REPRAPWORLD_KEYPAD_MIDDLE)
|
|
||||||
#endif //REPRAPWORLD_KEYPAD
|
|
||||||
#else
|
|
||||||
//atomatic, do not change
|
|
||||||
#define B_LE (1<<BL_LE)
|
|
||||||
#define B_UP (1<<BL_UP)
|
|
||||||
#define B_MI (1<<BL_MI)
|
|
||||||
#define B_DW (1<<BL_DW)
|
|
||||||
#define B_RI (1<<BL_RI)
|
|
||||||
#define B_ST (1<<BL_ST)
|
|
||||||
#define EN_B (1<<BLEN_B)
|
|
||||||
#define EN_A (1<<BLEN_A)
|
|
||||||
|
|
||||||
#define LCD_CLICKED ((buttons&B_MI)||(buttons&B_ST))
|
|
||||||
#endif//NEWPANEL
|
|
||||||
|
|
||||||
#else //no lcd
|
#else //no lcd
|
||||||
FORCE_INLINE void lcd_update() {}
|
FORCE_INLINE void lcd_update() {}
|
||||||
@ -79,6 +43,7 @@
|
|||||||
FORCE_INLINE void lcd_setstatus(const char* message) {}
|
FORCE_INLINE void lcd_setstatus(const char* message) {}
|
||||||
FORCE_INLINE void lcd_buttons_update() {}
|
FORCE_INLINE void lcd_buttons_update() {}
|
||||||
FORCE_INLINE void lcd_reset_alert_level() {}
|
FORCE_INLINE void lcd_reset_alert_level() {}
|
||||||
|
FORCE_INLINE void lcd_buzz(long duration,uint16_t freq) {}
|
||||||
|
|
||||||
#define LCD_MESSAGEPGM(x)
|
#define LCD_MESSAGEPGM(x)
|
||||||
#define LCD_ALERTMESSAGEPGM(x)
|
#define LCD_ALERTMESSAGEPGM(x)
|
||||||
|
@ -6,6 +6,183 @@
|
|||||||
* When selecting the rusian language, a slightly different LCD implementation is used to handle UTF8 characters.
|
* When selecting the rusian language, a slightly different LCD implementation is used to handle UTF8 characters.
|
||||||
**/
|
**/
|
||||||
|
|
||||||
|
#ifndef REPRAPWORLD_KEYPAD
|
||||||
|
extern volatile uint8_t buttons; //the last checked buttons in a bit array.
|
||||||
|
#else
|
||||||
|
extern volatile uint16_t buttons; //an extended version of the last checked buttons in a bit array.
|
||||||
|
#endif
|
||||||
|
|
||||||
|
////////////////////////////////////
|
||||||
|
// Setup button and encode mappings for each panel (into 'buttons' variable)
|
||||||
|
//
|
||||||
|
// This is just to map common functions (across different panels) onto the same
|
||||||
|
// macro name. The mapping is independent of whether the button is directly connected or
|
||||||
|
// via a shift/i2c register.
|
||||||
|
|
||||||
|
#ifdef ULTIPANEL
|
||||||
|
// All Ultipanels might have an encoder - so this is always be mapped onto first two bits
|
||||||
|
#define BLEN_B 1
|
||||||
|
#define BLEN_A 0
|
||||||
|
|
||||||
|
#define EN_B (1<<BLEN_B) // The two encoder pins are connected through BTN_EN1 and BTN_EN2
|
||||||
|
#define EN_A (1<<BLEN_A)
|
||||||
|
|
||||||
|
#if defined(BTN_ENC) && BTN_ENC > -1
|
||||||
|
// encoder click is directly connected
|
||||||
|
#define BLEN_C 2
|
||||||
|
#define EN_C (1<<BLEN_C)
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//
|
||||||
|
// Setup other button mappings of each panel
|
||||||
|
//
|
||||||
|
#if defined(LCD_I2C_VIKI)
|
||||||
|
#define B_I2C_BTN_OFFSET 3 // (the first three bit positions reserved for EN_A, EN_B, EN_C)
|
||||||
|
|
||||||
|
// button and encoder bit positions within 'buttons'
|
||||||
|
#define B_LE (BUTTON_LEFT<<B_I2C_BTN_OFFSET) // The remaining normalized buttons are all read via I2C
|
||||||
|
#define B_UP (BUTTON_UP<<B_I2C_BTN_OFFSET)
|
||||||
|
#define B_MI (BUTTON_SELECT<<B_I2C_BTN_OFFSET)
|
||||||
|
#define B_DW (BUTTON_DOWN<<B_I2C_BTN_OFFSET)
|
||||||
|
#define B_RI (BUTTON_RIGHT<<B_I2C_BTN_OFFSET)
|
||||||
|
|
||||||
|
#if defined(BTN_ENC) && BTN_ENC > -1
|
||||||
|
// the pause/stop/restart button is connected to BTN_ENC when used
|
||||||
|
#define B_ST (EN_C) // Map the pause/stop/resume button into its normalized functional name
|
||||||
|
#define LCD_CLICKED (buttons&(B_MI|B_RI|B_ST)) // pause/stop button also acts as click until we implement proper pause/stop.
|
||||||
|
#else
|
||||||
|
#define LCD_CLICKED (buttons&(B_MI|B_RI))
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// I2C buttons take too long to read inside an interrupt context and so we read them during lcd_update
|
||||||
|
#define LCD_HAS_SLOW_BUTTONS
|
||||||
|
|
||||||
|
#elif defined(LCD_I2C_PANELOLU2)
|
||||||
|
// encoder click can be read through I2C if not directly connected
|
||||||
|
#if BTN_ENC <= 0
|
||||||
|
#define B_I2C_BTN_OFFSET 3 // (the first three bit positions reserved for EN_A, EN_B, EN_C)
|
||||||
|
|
||||||
|
#define B_MI (PANELOLU2_ENCODER_C<<B_I2C_BTN_OFFSET) // requires LiquidTWI2 library v1.2.3 or later
|
||||||
|
|
||||||
|
#define LCD_CLICKED (buttons&B_MI)
|
||||||
|
|
||||||
|
// I2C buttons take too long to read inside an interrupt context and so we read them during lcd_update
|
||||||
|
#define LCD_HAS_SLOW_BUTTONS
|
||||||
|
#else
|
||||||
|
#define LCD_CLICKED (buttons&EN_C)
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#elif defined(REPRAPWORLD_KEYPAD)
|
||||||
|
// define register bit values, don't change it
|
||||||
|
#define BLEN_REPRAPWORLD_KEYPAD_F3 0
|
||||||
|
#define BLEN_REPRAPWORLD_KEYPAD_F2 1
|
||||||
|
#define BLEN_REPRAPWORLD_KEYPAD_F1 2
|
||||||
|
#define BLEN_REPRAPWORLD_KEYPAD_UP 3
|
||||||
|
#define BLEN_REPRAPWORLD_KEYPAD_RIGHT 4
|
||||||
|
#define BLEN_REPRAPWORLD_KEYPAD_MIDDLE 5
|
||||||
|
#define BLEN_REPRAPWORLD_KEYPAD_DOWN 6
|
||||||
|
#define BLEN_REPRAPWORLD_KEYPAD_LEFT 7
|
||||||
|
|
||||||
|
#define REPRAPWORLD_BTN_OFFSET 3 // bit offset into buttons for shift register values
|
||||||
|
|
||||||
|
#define EN_REPRAPWORLD_KEYPAD_F3 (1<<(BLEN_REPRAPWORLD_KEYPAD_F3+REPRAPWORLD_BTN_OFFSET))
|
||||||
|
#define EN_REPRAPWORLD_KEYPAD_F2 (1<<(BLEN_REPRAPWORLD_KEYPAD_F2+REPRAPWORLD_BTN_OFFSET))
|
||||||
|
#define EN_REPRAPWORLD_KEYPAD_F1 (1<<(BLEN_REPRAPWORLD_KEYPAD_F1+REPRAPWORLD_BTN_OFFSET))
|
||||||
|
#define EN_REPRAPWORLD_KEYPAD_UP (1<<(BLEN_REPRAPWORLD_KEYPAD_UP+REPRAPWORLD_BTN_OFFSET))
|
||||||
|
#define EN_REPRAPWORLD_KEYPAD_RIGHT (1<<(BLEN_REPRAPWORLD_KEYPAD_RIGHT+REPRAPWORLD_BTN_OFFSET))
|
||||||
|
#define EN_REPRAPWORLD_KEYPAD_MIDDLE (1<<(BLEN_REPRAPWORLD_KEYPAD_MIDDLE+REPRAPWORLD_BTN_OFFSET))
|
||||||
|
#define EN_REPRAPWORLD_KEYPAD_DOWN (1<<(BLEN_REPRAPWORLD_KEYPAD_DOWN+REPRAPWORLD_BTN_OFFSET))
|
||||||
|
#define EN_REPRAPWORLD_KEYPAD_LEFT (1<<(BLEN_REPRAPWORLD_KEYPAD_LEFT+REPRAPWORLD_BTN_OFFSET))
|
||||||
|
|
||||||
|
#define LCD_CLICKED ((buttons&EN_C) || (buttons&EN_REPRAPWORLD_KEYPAD_F1))
|
||||||
|
#define REPRAPWORLD_KEYPAD_MOVE_Y_DOWN (buttons&EN_REPRAPWORLD_KEYPAD_DOWN)
|
||||||
|
#define REPRAPWORLD_KEYPAD_MOVE_Y_UP (buttons&EN_REPRAPWORLD_KEYPAD_UP)
|
||||||
|
#define REPRAPWORLD_KEYPAD_MOVE_HOME (buttons&EN_REPRAPWORLD_KEYPAD_MIDDLE)
|
||||||
|
|
||||||
|
#elif defined(NEWPANEL)
|
||||||
|
#define LCD_CLICKED (buttons&EN_C)
|
||||||
|
|
||||||
|
#else // old style ULTIPANEL
|
||||||
|
//bits in the shift register that carry the buttons for:
|
||||||
|
// left up center down right red(stop)
|
||||||
|
#define BL_LE 7
|
||||||
|
#define BL_UP 6
|
||||||
|
#define BL_MI 5
|
||||||
|
#define BL_DW 4
|
||||||
|
#define BL_RI 3
|
||||||
|
#define BL_ST 2
|
||||||
|
|
||||||
|
//automatic, do not change
|
||||||
|
#define B_LE (1<<BL_LE)
|
||||||
|
#define B_UP (1<<BL_UP)
|
||||||
|
#define B_MI (1<<BL_MI)
|
||||||
|
#define B_DW (1<<BL_DW)
|
||||||
|
#define B_RI (1<<BL_RI)
|
||||||
|
#define B_ST (1<<BL_ST)
|
||||||
|
|
||||||
|
#define LCD_CLICKED (buttons&(B_MI|B_ST))
|
||||||
|
#endif
|
||||||
|
|
||||||
|
////////////////////////
|
||||||
|
// Setup Rotary Encoder Bit Values (for two pin encoders to indicate movement)
|
||||||
|
// These values are independent of which pins are used for EN_A and EN_B indications
|
||||||
|
// The rotary encoder part is also independent to the chipset used for the LCD
|
||||||
|
#if defined(EN_A) && defined(EN_B)
|
||||||
|
#ifndef ULTIMAKERCONTROLLER
|
||||||
|
#define encrot0 0
|
||||||
|
#define encrot1 2
|
||||||
|
#define encrot2 3
|
||||||
|
#define encrot3 1
|
||||||
|
#else
|
||||||
|
#define encrot0 0
|
||||||
|
#define encrot1 1
|
||||||
|
#define encrot2 3
|
||||||
|
#define encrot3 2
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif //ULTIPANEL
|
||||||
|
|
||||||
|
////////////////////////////////////
|
||||||
|
// Create LCD class instance and chipset-specific information
|
||||||
|
#if defined(LCD_I2C_TYPE_PCF8575)
|
||||||
|
// note: these are register mapped pins on the PCF8575 controller not Arduino pins
|
||||||
|
#define LCD_I2C_PIN_BL 3
|
||||||
|
#define LCD_I2C_PIN_EN 2
|
||||||
|
#define LCD_I2C_PIN_RW 1
|
||||||
|
#define LCD_I2C_PIN_RS 0
|
||||||
|
#define LCD_I2C_PIN_D4 4
|
||||||
|
#define LCD_I2C_PIN_D5 5
|
||||||
|
#define LCD_I2C_PIN_D6 6
|
||||||
|
#define LCD_I2C_PIN_D7 7
|
||||||
|
|
||||||
|
#include <Wire.h>
|
||||||
|
#include <LCD.h>
|
||||||
|
#include <LiquidCrystal_I2C.h>
|
||||||
|
#define LCD_CLASS LiquidCrystal_I2C
|
||||||
|
LCD_CLASS lcd(LCD_I2C_ADDRESS,LCD_I2C_PIN_EN,LCD_I2C_PIN_RW,LCD_I2C_PIN_RS,LCD_I2C_PIN_D4,LCD_I2C_PIN_D5,LCD_I2C_PIN_D6,LCD_I2C_PIN_D7);
|
||||||
|
|
||||||
|
#elif defined(LCD_I2C_TYPE_MCP23017)
|
||||||
|
//for the LED indicators (which maybe mapped to different things in lcd_implementation_update_indicators())
|
||||||
|
#define LED_A 0x04 //100
|
||||||
|
#define LED_B 0x02 //010
|
||||||
|
#define LED_C 0x01 //001
|
||||||
|
|
||||||
|
#define LCD_HAS_STATUS_INDICATORS
|
||||||
|
|
||||||
|
#include <Wire.h>
|
||||||
|
#include <LiquidTWI2.h>
|
||||||
|
#define LCD_CLASS LiquidTWI2
|
||||||
|
LCD_CLASS lcd(LCD_I2C_ADDRESS);
|
||||||
|
|
||||||
|
#elif defined(LCD_I2C_TYPE_MCP23008)
|
||||||
|
#include <Wire.h>
|
||||||
|
#include <LiquidTWI2.h>
|
||||||
|
#define LCD_CLASS LiquidTWI2
|
||||||
|
LCD_CLASS lcd(LCD_I2C_ADDRESS);
|
||||||
|
|
||||||
|
#else
|
||||||
|
// Standard directly connected LCD implementations
|
||||||
#if LANGUAGE_CHOICE == 6
|
#if LANGUAGE_CHOICE == 6
|
||||||
#include "LiquidCrystalRus.h"
|
#include "LiquidCrystalRus.h"
|
||||||
#define LCD_CLASS LiquidCrystalRus
|
#define LCD_CLASS LiquidCrystalRus
|
||||||
@ -13,6 +190,8 @@
|
|||||||
#include <LiquidCrystal.h>
|
#include <LiquidCrystal.h>
|
||||||
#define LCD_CLASS LiquidCrystal
|
#define LCD_CLASS LiquidCrystal
|
||||||
#endif
|
#endif
|
||||||
|
LCD_CLASS lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5,LCD_PINS_D6,LCD_PINS_D7); //RS,Enable,D4,D5,D6,D7
|
||||||
|
#endif
|
||||||
|
|
||||||
/* Custom characters defined in the first 8 characters of the LCD */
|
/* Custom characters defined in the first 8 characters of the LCD */
|
||||||
#define LCD_STR_BEDTEMP "\x00"
|
#define LCD_STR_BEDTEMP "\x00"
|
||||||
@ -25,7 +204,6 @@
|
|||||||
#define LCD_STR_CLOCK "\x07"
|
#define LCD_STR_CLOCK "\x07"
|
||||||
#define LCD_STR_ARROW_RIGHT "\x7E" /* from the default character set */
|
#define LCD_STR_ARROW_RIGHT "\x7E" /* from the default character set */
|
||||||
|
|
||||||
LCD_CLASS lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5,LCD_PINS_D6,LCD_PINS_D7); //RS,Enable,D4,D5,D6,D7
|
|
||||||
static void lcd_implementation_init()
|
static void lcd_implementation_init()
|
||||||
{
|
{
|
||||||
byte bedTemp[8] =
|
byte bedTemp[8] =
|
||||||
@ -111,7 +289,27 @@ static void lcd_implementation_init()
|
|||||||
B00000,
|
B00000,
|
||||||
B00000
|
B00000
|
||||||
}; //thanks Sonny Mounicou
|
}; //thanks Sonny Mounicou
|
||||||
|
|
||||||
|
#if defined(LCDI2C_TYPE_PCF8575)
|
||||||
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
|
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
|
||||||
|
#ifdef LCD_I2C_PIN_BL
|
||||||
|
lcd.setBacklightPin(LCD_I2C_PIN_BL,POSITIVE);
|
||||||
|
lcd.setBacklight(HIGH);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#elif defined(LCD_I2C_TYPE_MCP23017)
|
||||||
|
lcd.setMCPType(LTI_TYPE_MCP23017);
|
||||||
|
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
|
||||||
|
lcd.setBacklight(0); //set all the LEDs off to begin with
|
||||||
|
|
||||||
|
#elif defined(LCD_I2C_TYPE_MCP23008)
|
||||||
|
lcd.setMCPType(LTI_TYPE_MCP23008);
|
||||||
|
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
|
||||||
|
|
||||||
|
#else
|
||||||
|
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
|
||||||
|
#endif
|
||||||
|
|
||||||
lcd.createChar(LCD_STR_BEDTEMP[0], bedTemp);
|
lcd.createChar(LCD_STR_BEDTEMP[0], bedTemp);
|
||||||
lcd.createChar(LCD_STR_DEGREE[0], degree);
|
lcd.createChar(LCD_STR_DEGREE[0], degree);
|
||||||
lcd.createChar(LCD_STR_THERMOMETER[0], thermometer);
|
lcd.createChar(LCD_STR_THERMOMETER[0], thermometer);
|
||||||
@ -501,7 +699,9 @@ static void lcd_implementation_drawmenu_sddirectory(uint8_t row, const char* pst
|
|||||||
|
|
||||||
static void lcd_implementation_quick_feedback()
|
static void lcd_implementation_quick_feedback()
|
||||||
{
|
{
|
||||||
#if BEEPER > -1
|
#ifdef LCD_USE_I2C_BUZZER
|
||||||
|
lcd.buzz(60,1000/6);
|
||||||
|
#elif defined(BEEPER) && BEEPER > -1
|
||||||
SET_OUTPUT(BEEPER);
|
SET_OUTPUT(BEEPER);
|
||||||
for(int8_t i=0;i<10;i++)
|
for(int8_t i=0;i<10;i++)
|
||||||
{
|
{
|
||||||
@ -512,4 +712,37 @@ static void lcd_implementation_quick_feedback()
|
|||||||
}
|
}
|
||||||
#endif
|
#endif
|
||||||
}
|
}
|
||||||
|
|
||||||
|
#ifdef LCD_HAS_STATUS_INDICATORS
|
||||||
|
static void lcd_implementation_update_indicators()
|
||||||
|
{
|
||||||
|
#if defined(LCD_I2C_PANELOLU2) || defined(LCD_I2C_VIKI)
|
||||||
|
//set the LEDS - referred to as backlights by the LiquidTWI2 library
|
||||||
|
static uint8_t ledsprev = 0;
|
||||||
|
uint8_t leds = 0;
|
||||||
|
if (target_temperature_bed > 0) leds |= LED_A;
|
||||||
|
if (target_temperature[0] > 0) leds |= LED_B;
|
||||||
|
if (fanSpeed) leds |= LED_C;
|
||||||
|
#if EXTRUDERS > 1
|
||||||
|
if (target_temperature[1] > 0) leds |= LED_C;
|
||||||
|
#endif
|
||||||
|
if (leds != ledsprev) {
|
||||||
|
lcd.setBacklight(leds);
|
||||||
|
ledsprev = leds;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef LCD_HAS_SLOW_BUTTONS
|
||||||
|
static uint8_t lcd_implementation_read_slow_buttons()
|
||||||
|
{
|
||||||
|
#ifdef LCD_I2C_TYPE_MCP23017
|
||||||
|
// Reading these buttons this is likely to be too slow to call inside interrupt context
|
||||||
|
// so they are called during normal lcd_update
|
||||||
|
return lcd.readButtons() << B_I2C_BTN_OFFSET;
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
#endif//ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H
|
#endif//ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H
|
||||||
|
Loading…
Reference in New Issue
Block a user