bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Add loose soft endstop state, apply to UBL fine-tune (#19681)

Browse Source 
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
This commit is contained in:
Earle F. Philhower, III
2020-10-12 14:48:04 -07:00
committed by GitHub
parent f5139f8bf4
commit 193c0a52d9
16 changed files with 106 additions and 133 deletions
Download Patch File Download Diff File Expand all files Collapse all files

16
Marlin/src/gcode/bedlevel/abl/G29.cpp
View File

@@ -201,10 +201,6 @@ G29_TYPE GcodeSuite::G29() {
ABL_VAR int abl_probe_index;
#endif
#if BOTH(HAS_SOFTWARE_ENDSTOPS, PROBE_MANUALLY)
ABL_VAR bool saved_soft_endstops_state = true;
#endif
#if ABL_GRID
#if ENABLED(PROBE_MANUALLY)
@@ -461,7 +457,7 @@ G29_TYPE GcodeSuite::G29() {
// Abort current G29 procedure, go back to idle state
if (seenA && g29_in_progress) {
SERIAL_ECHOLNPGM("Manual G29 aborted");
TERN_(HAS_SOFTWARE_ENDSTOPS, soft_endstops_enabled = saved_soft_endstops_state);
SET_SOFT_ENDSTOP_LOOSE(false);
set_bed_leveling_enabled(abl_should_enable);
g29_in_progress = false;
TERN_(LCD_BED_LEVELING, ui.wait_for_move = false);
@@ -482,7 +478,7 @@ G29_TYPE GcodeSuite::G29() {
if (abl_probe_index == 0) {
// For the initial G29 S2 save software endstop state
TERN_(HAS_SOFTWARE_ENDSTOPS, saved_soft_endstops_state = soft_endstops_enabled);
SET_SOFT_ENDSTOP_LOOSE(true);
// Move close to the bed before the first point
do_blocking_move_to_z(0);
}
@@ -552,14 +548,14 @@ G29_TYPE GcodeSuite::G29() {
_manual_goto_xy(probePos); // Can be used here too!
// Disable software endstops to allow manual adjustment
// If G29 is not completed, they will not be re-enabled
TERN_(HAS_SOFTWARE_ENDSTOPS, soft_endstops_enabled = false);
SET_SOFT_ENDSTOP_LOOSE(true);
G29_RETURN(false);
}
else {
// Leveling done! Fall through to G29 finishing code below
SERIAL_ECHOLNPGM("Grid probing done.");
// Re-enable software endstops, if needed
TERN_(HAS_SOFTWARE_ENDSTOPS, soft_endstops_enabled = saved_soft_endstops_state);
SET_SOFT_ENDSTOP_LOOSE(false);
}
#elif ENABLED(AUTO_BED_LEVELING_3POINT)
@@ -570,7 +566,7 @@ G29_TYPE GcodeSuite::G29() {
_manual_goto_xy(probePos);
// Disable software endstops to allow manual adjustment
// If G29 is not completed, they will not be re-enabled
TERN_(HAS_SOFTWARE_ENDSTOPS, soft_endstops_enabled = false);
SET_SOFT_ENDSTOP_LOOSE(true);
G29_RETURN(false);
}
else {
@@ -578,7 +574,7 @@ G29_TYPE GcodeSuite::G29() {
SERIAL_ECHOLNPGM("3-point probing done.");
// Re-enable software endstops, if needed
TERN_(HAS_SOFTWARE_ENDSTOPS, soft_endstops_enabled = saved_soft_endstops_state);
SET_SOFT_ENDSTOP_LOOSE(false);
if (!dryrun) {
vector_3 planeNormal = vector_3::cross(points[0] - points[1], points[2] - points[1]).get_normal();