Merge with upstream branch 2.0.5.3
This commit is contained in:
parent
192498e905
commit
17e830b04b
@ -71,11 +71,9 @@
|
|||||||
// @section info
|
// @section info
|
||||||
|
|
||||||
// Author info of this build printed to the host during boot and M115
|
// Author info of this build printed to the host during boot and M115
|
||||||
<<<<<<< HEAD
|
|
||||||
#define STRING_CONFIG_H_AUTHOR "(Matthew Piercey, Bot-In-a-Box Educational Robotics)" // Who made the changes.
|
|
||||||
=======
|
|
||||||
#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
|
#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
|
//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
|
||||||
|
|
||||||
/**
|
/**
|
||||||
@ -93,11 +91,8 @@
|
|||||||
#define SHOW_BOOTSCREEN
|
#define SHOW_BOOTSCREEN
|
||||||
|
|
||||||
// Show the bitmap in Marlin/_Bootscreen.h on startup.
|
// Show the bitmap in Marlin/_Bootscreen.h on startup.
|
||||||
<<<<<<< HEAD
|
|
||||||
#define SHOW_CUSTOM_BOOTSCREEN
|
#define SHOW_CUSTOM_BOOTSCREEN
|
||||||
=======
|
|
||||||
//#define SHOW_CUSTOM_BOOTSCREEN
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
|
|
||||||
// Show the bitmap in Marlin/_Statusscreen.h on the status screen.
|
// Show the bitmap in Marlin/_Statusscreen.h on the status screen.
|
||||||
//#define CUSTOM_STATUS_SCREEN_IMAGE
|
//#define CUSTOM_STATUS_SCREEN_IMAGE
|
||||||
@ -112,12 +107,9 @@
|
|||||||
*
|
*
|
||||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||||
*/
|
*/
|
||||||
<<<<<<< HEAD
|
|
||||||
#define SERIAL_PORT -1
|
#define SERIAL_PORT -1
|
||||||
#define SERIAL_PORT_2 0
|
#define SERIAL_PORT_2 0
|
||||||
=======
|
|
||||||
#define SERIAL_PORT 0
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Select a secondary serial port on the board to use for communication with the host.
|
* Select a secondary serial port on the board to use for communication with the host.
|
||||||
@ -141,19 +133,11 @@
|
|||||||
|
|
||||||
// Choose the name from boards.h that matches your setup
|
// Choose the name from boards.h that matches your setup
|
||||||
#ifndef MOTHERBOARD
|
#ifndef MOTHERBOARD
|
||||||
<<<<<<< HEAD
|
|
||||||
#define MOTHERBOARD BOARD_BTT_SKR_V1_3
|
#define MOTHERBOARD BOARD_BTT_SKR_V1_3
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// Name displayed in the LCD "Ready" message and Info menu
|
// Name displayed in the LCD "Ready" message and Info menu
|
||||||
#define CUSTOM_MACHINE_NAME "SKR i3"
|
#define CUSTOM_MACHINE_NAME "SKR i3"
|
||||||
=======
|
|
||||||
#define MOTHERBOARD BOARD_RAMPS_14_EFB
|
|
||||||
#endif
|
|
||||||
|
|
||||||
// Name displayed in the LCD "Ready" message and Info menu
|
|
||||||
//#define CUSTOM_MACHINE_NAME "3D Printer"
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
|
|
||||||
// Printer's unique ID, used by some programs to differentiate between machines.
|
// Printer's unique ID, used by some programs to differentiate between machines.
|
||||||
// Choose your own or use a service like http://www.uuidgenerator.net/version4
|
// Choose your own or use a service like http://www.uuidgenerator.net/version4
|
||||||
@ -166,11 +150,7 @@
|
|||||||
#define EXTRUDERS 1
|
#define EXTRUDERS 1
|
||||||
|
|
||||||
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
|
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
|
||||||
<<<<<<< HEAD
|
|
||||||
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75
|
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75
|
||||||
=======
|
|
||||||
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
|
|
||||||
// For Cyclops or any "multi-extruder" that shares a single nozzle.
|
// For Cyclops or any "multi-extruder" that shares a single nozzle.
|
||||||
//#define SINGLENOZZLE
|
//#define SINGLENOZZLE
|
||||||
@ -439,11 +419,7 @@
|
|||||||
#define TEMP_SENSOR_5 0
|
#define TEMP_SENSOR_5 0
|
||||||
#define TEMP_SENSOR_6 0
|
#define TEMP_SENSOR_6 0
|
||||||
#define TEMP_SENSOR_7 0
|
#define TEMP_SENSOR_7 0
|
||||||
<<<<<<< HEAD
|
|
||||||
#define TEMP_SENSOR_BED 1
|
#define TEMP_SENSOR_BED 1
|
||||||
=======
|
|
||||||
#define TEMP_SENSOR_BED 0
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
#define TEMP_SENSOR_PROBE 0
|
#define TEMP_SENSOR_PROBE 0
|
||||||
#define TEMP_SENSOR_CHAMBER 0
|
#define TEMP_SENSOR_CHAMBER 0
|
||||||
|
|
||||||
@ -479,7 +455,6 @@
|
|||||||
// Above this temperature the heater will be switched off.
|
// Above this temperature the heater will be switched off.
|
||||||
// This can protect components from overheating, but NOT from shorts and failures.
|
// This can protect components from overheating, but NOT from shorts and failures.
|
||||||
// (Use MINTEMP for thermistor short/failure protection.)
|
// (Use MINTEMP for thermistor short/failure protection.)
|
||||||
<<<<<<< HEAD
|
|
||||||
#define HEATER_0_MAXTEMP 260
|
#define HEATER_0_MAXTEMP 260
|
||||||
#define HEATER_1_MAXTEMP 260
|
#define HEATER_1_MAXTEMP 260
|
||||||
#define HEATER_2_MAXTEMP 260
|
#define HEATER_2_MAXTEMP 260
|
||||||
@ -489,17 +464,6 @@
|
|||||||
#define HEATER_6_MAXTEMP 260
|
#define HEATER_6_MAXTEMP 260
|
||||||
#define HEATER_7_MAXTEMP 260
|
#define HEATER_7_MAXTEMP 260
|
||||||
#define BED_MAXTEMP 115
|
#define BED_MAXTEMP 115
|
||||||
=======
|
|
||||||
#define HEATER_0_MAXTEMP 275
|
|
||||||
#define HEATER_1_MAXTEMP 275
|
|
||||||
#define HEATER_2_MAXTEMP 275
|
|
||||||
#define HEATER_3_MAXTEMP 275
|
|
||||||
#define HEATER_4_MAXTEMP 275
|
|
||||||
#define HEATER_5_MAXTEMP 275
|
|
||||||
#define HEATER_6_MAXTEMP 275
|
|
||||||
#define HEATER_7_MAXTEMP 275
|
|
||||||
#define BED_MAXTEMP 150
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= PID Settings ================================
|
//============================= PID Settings ================================
|
||||||
@ -525,7 +489,6 @@
|
|||||||
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
|
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
|
||||||
|
|
||||||
// Ultimaker
|
// Ultimaker
|
||||||
<<<<<<< HEAD
|
|
||||||
//#define DEFAULT_Kp 22.2
|
//#define DEFAULT_Kp 22.2
|
||||||
//#define DEFAULT_Ki 1.08
|
//#define DEFAULT_Ki 1.08
|
||||||
//#define DEFAULT_Kd 114
|
//#define DEFAULT_Kd 114
|
||||||
@ -539,11 +502,6 @@
|
|||||||
//#define DEFAULT_Kp 17.45
|
//#define DEFAULT_Kp 17.45
|
||||||
//#define DEFAULT_Ki 0.84
|
//#define DEFAULT_Ki 0.84
|
||||||
//#define DEFAULT_Kd 90.41
|
//#define DEFAULT_Kd 90.41
|
||||||
=======
|
|
||||||
#define DEFAULT_Kp 22.2
|
|
||||||
#define DEFAULT_Ki 1.08
|
|
||||||
#define DEFAULT_Kd 114
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
|
|
||||||
// MakerGear
|
// MakerGear
|
||||||
//#define DEFAULT_Kp 7.0
|
//#define DEFAULT_Kp 7.0
|
||||||
@ -555,14 +513,11 @@
|
|||||||
//#define DEFAULT_Ki 2.25
|
//#define DEFAULT_Ki 2.25
|
||||||
//#define DEFAULT_Kd 440
|
//#define DEFAULT_Kd 440
|
||||||
|
|
||||||
<<<<<<< HEAD
|
|
||||||
// Defaults from PID Tuning
|
// Defaults from PID Tuning
|
||||||
#define DEFAULT_Kp 23.66
|
#define DEFAULT_Kp 23.66
|
||||||
#define DEFAULT_Ki 1.42
|
#define DEFAULT_Ki 1.42
|
||||||
#define DEFAULT_Kd 98.72
|
#define DEFAULT_Kd 98.72
|
||||||
|
|
||||||
=======
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
#endif // PIDTEMP
|
#endif // PIDTEMP
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
@ -582,11 +537,7 @@
|
|||||||
* heater. If your configuration is significantly different than this and you don't understand
|
* heater. If your configuration is significantly different than this and you don't understand
|
||||||
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
|
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
|
||||||
*/
|
*/
|
||||||
<<<<<<< HEAD
|
|
||||||
#define PIDTEMPBED
|
#define PIDTEMPBED
|
||||||
=======
|
|
||||||
//#define PIDTEMPBED
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
|
|
||||||
//#define BED_LIMIT_SWITCHING
|
//#define BED_LIMIT_SWITCHING
|
||||||
|
|
||||||
@ -604,7 +555,6 @@
|
|||||||
|
|
||||||
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
|
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
|
||||||
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
|
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
|
||||||
<<<<<<< HEAD
|
|
||||||
//#define DEFAULT_bedKp 10.00
|
//#define DEFAULT_bedKp 10.00
|
||||||
//#define DEFAULT_bedKi .023
|
//#define DEFAULT_bedKi .023
|
||||||
//#define DEFAULT_bedKd 305.4
|
//#define DEFAULT_bedKd 305.4
|
||||||
@ -618,11 +568,6 @@
|
|||||||
//#define DEFAULT_bedKp 602.82
|
//#define DEFAULT_bedKp 602.82
|
||||||
//#define DEFAULT_bedKi 114.98
|
//#define DEFAULT_bedKi 114.98
|
||||||
//#define DEFAULT_bedKd 790.15
|
//#define DEFAULT_bedKd 790.15
|
||||||
=======
|
|
||||||
#define DEFAULT_bedKp 10.00
|
|
||||||
#define DEFAULT_bedKi .023
|
|
||||||
#define DEFAULT_bedKd 305.4
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
|
|
||||||
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
|
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
|
||||||
//from pidautotune
|
//from pidautotune
|
||||||
@ -630,14 +575,11 @@
|
|||||||
//#define DEFAULT_bedKi 1.41
|
//#define DEFAULT_bedKi 1.41
|
||||||
//#define DEFAULT_bedKd 1675.16
|
//#define DEFAULT_bedKd 1675.16
|
||||||
|
|
||||||
<<<<<<< HEAD
|
|
||||||
// Defaults from PID Tuning
|
// Defaults from PID Tuning
|
||||||
#define DEFAULT_bedKp 148.74
|
#define DEFAULT_bedKp 148.74
|
||||||
#define DEFAULT_bedKi 29.72
|
#define DEFAULT_bedKi 29.72
|
||||||
#define DEFAULT_bedKd 496.30
|
#define DEFAULT_bedKd 496.30
|
||||||
|
|
||||||
=======
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
|
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
|
||||||
#endif // PIDTEMPBED
|
#endif // PIDTEMPBED
|
||||||
|
|
||||||
@ -651,11 +593,7 @@
|
|||||||
* *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! ***
|
* *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! ***
|
||||||
*/
|
*/
|
||||||
#define PREVENT_COLD_EXTRUSION
|
#define PREVENT_COLD_EXTRUSION
|
||||||
<<<<<<< HEAD
|
|
||||||
#define EXTRUDE_MINTEMP 180
|
#define EXTRUDE_MINTEMP 180
|
||||||
=======
|
|
||||||
#define EXTRUDE_MINTEMP 170
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Prevent a single extrusion longer than EXTRUDE_MAXLENGTH.
|
* Prevent a single extrusion longer than EXTRUDE_MAXLENGTH.
|
||||||
@ -743,22 +681,13 @@
|
|||||||
#endif
|
#endif
|
||||||
|
|
||||||
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||||
<<<<<<< HEAD
|
|
||||||
#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
||||||
#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
||||||
=======
|
|
||||||
#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
|
||||||
#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||||
#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||||
#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||||
#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||||
<<<<<<< HEAD
|
|
||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe.
|
||||||
=======
|
|
||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe.
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Stepper Drivers
|
* Stepper Drivers
|
||||||
@ -776,7 +705,6 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE
|
* TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE']
|
||||||
*/
|
*/
|
||||||
<<<<<<< HEAD
|
|
||||||
#define X_DRIVER_TYPE TMC2130
|
#define X_DRIVER_TYPE TMC2130
|
||||||
#define Y_DRIVER_TYPE TMC2130
|
#define Y_DRIVER_TYPE TMC2130
|
||||||
#define Z_DRIVER_TYPE TMC2130
|
#define Z_DRIVER_TYPE TMC2130
|
||||||
@ -786,17 +714,6 @@
|
|||||||
//#define Z3_DRIVER_TYPE A4988
|
//#define Z3_DRIVER_TYPE A4988
|
||||||
//#define Z4_DRIVER_TYPE A4988
|
//#define Z4_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE TMC2130
|
#define E0_DRIVER_TYPE TMC2130
|
||||||
=======
|
|
||||||
//#define X_DRIVER_TYPE A4988
|
|
||||||
//#define Y_DRIVER_TYPE A4988
|
|
||||||
//#define Z_DRIVER_TYPE A4988
|
|
||||||
//#define X2_DRIVER_TYPE A4988
|
|
||||||
//#define Y2_DRIVER_TYPE A4988
|
|
||||||
//#define Z2_DRIVER_TYPE A4988
|
|
||||||
//#define Z3_DRIVER_TYPE A4988
|
|
||||||
//#define Z4_DRIVER_TYPE A4988
|
|
||||||
//#define E0_DRIVER_TYPE A4988
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
//#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
//#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
//#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
@ -848,22 +765,14 @@
|
|||||||
* Override with M92
|
* Override with M92
|
||||||
* X, Y, Z, E0 [, E1[, E2...]]
|
* X, Y, Z, E0 [, E1[, E2...]]
|
||||||
*/
|
*/
|
||||||
<<<<<<< HEAD
|
|
||||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 100 }
|
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 100 }
|
||||||
=======
|
|
||||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 }
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Default Max Feed Rate (mm/s)
|
* Default Max Feed Rate (mm/s)
|
||||||
* Override with M203
|
* Override with M203
|
||||||
* X, Y, Z, E0 [, E1[, E2...]]
|
* X, Y, Z, E0 [, E1[, E2...]]
|
||||||
*/
|
*/
|
||||||
<<<<<<< HEAD
|
|
||||||
#define DEFAULT_MAX_FEEDRATE { 200, 200, 8, 25 }
|
#define DEFAULT_MAX_FEEDRATE { 200, 200, 8, 25 }
|
||||||
=======
|
|
||||||
#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 }
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
|
|
||||||
//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
|
//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
|
||||||
#if ENABLED(LIMITED_MAX_FR_EDITING)
|
#if ENABLED(LIMITED_MAX_FR_EDITING)
|
||||||
@ -876,11 +785,7 @@
|
|||||||
* Override with M201
|
* Override with M201
|
||||||
* X, Y, Z, E0 [, E1[, E2...]]
|
* X, Y, Z, E0 [, E1[, E2...]]
|
||||||
*/
|
*/
|
||||||
<<<<<<< HEAD
|
|
||||||
#define DEFAULT_MAX_ACCELERATION { 800, 800, 100, 10000 }
|
#define DEFAULT_MAX_ACCELERATION { 800, 800, 100, 10000 }
|
||||||
=======
|
|
||||||
#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 }
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
|
|
||||||
//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
|
//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
|
||||||
#if ENABLED(LIMITED_MAX_ACCEL_EDITING)
|
#if ENABLED(LIMITED_MAX_ACCEL_EDITING)
|
||||||
@ -895,15 +800,9 @@
|
|||||||
* M204 R Retract Acceleration
|
* M204 R Retract Acceleration
|
||||||
* M204 T Travel Acceleration
|
* M204 T Travel Acceleration
|
||||||
*/
|
*/
|
||||||
<<<<<<< HEAD
|
|
||||||
#define DEFAULT_ACCELERATION 600 // X, Y, Z and E acceleration for printing moves
|
#define DEFAULT_ACCELERATION 600 // X, Y, Z and E acceleration for printing moves
|
||||||
#define DEFAULT_RETRACT_ACCELERATION 2500 // E acceleration for retracts
|
#define DEFAULT_RETRACT_ACCELERATION 2500 // E acceleration for retracts
|
||||||
#define DEFAULT_TRAVEL_ACCELERATION 800 // X, Y, Z acceleration for travel (non printing) moves
|
#define DEFAULT_TRAVEL_ACCELERATION 800 // X, Y, Z acceleration for travel (non printing) moves
|
||||||
=======
|
|
||||||
#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves
|
|
||||||
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
|
|
||||||
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Default Jerk limits (mm/s)
|
* Default Jerk limits (mm/s)
|
||||||
@ -913,17 +812,10 @@
|
|||||||
* When changing speed and direction, if the difference is less than the
|
* When changing speed and direction, if the difference is less than the
|
||||||
* value set here, it may happen instantaneously.
|
* value set here, it may happen instantaneously.
|
||||||
*/
|
*/
|
||||||
<<<<<<< HEAD
|
|
||||||
#define CLASSIC_JERK
|
#define CLASSIC_JERK
|
||||||
#if ENABLED(CLASSIC_JERK)
|
#if ENABLED(CLASSIC_JERK)
|
||||||
#define DEFAULT_XJERK 7.0
|
#define DEFAULT_XJERK 7.0
|
||||||
#define DEFAULT_YJERK 7.0
|
#define DEFAULT_YJERK 7.0
|
||||||
=======
|
|
||||||
//#define CLASSIC_JERK
|
|
||||||
#if ENABLED(CLASSIC_JERK)
|
|
||||||
#define DEFAULT_XJERK 10.0
|
|
||||||
#define DEFAULT_YJERK 10.0
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
#define DEFAULT_ZJERK 0.3
|
#define DEFAULT_ZJERK 0.3
|
||||||
|
|
||||||
//#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves
|
//#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves
|
||||||
@ -934,11 +826,7 @@
|
|||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
<<<<<<< HEAD
|
|
||||||
#define DEFAULT_EJERK 2.0 // May be used by Linear Advance
|
#define DEFAULT_EJERK 2.0 // May be used by Linear Advance
|
||||||
=======
|
|
||||||
#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Junction Deviation Factor
|
* Junction Deviation Factor
|
||||||
@ -948,11 +836,7 @@
|
|||||||
* http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
|
* http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
|
||||||
*/
|
*/
|
||||||
#if DISABLED(CLASSIC_JERK)
|
#if DISABLED(CLASSIC_JERK)
|
||||||
<<<<<<< HEAD
|
|
||||||
#define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
|
#define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
|
||||||
=======
|
|
||||||
#define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
/**
|
/**
|
||||||
@ -1035,11 +919,7 @@
|
|||||||
/**
|
/**
|
||||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||||
*/
|
*/
|
||||||
<<<<<<< HEAD
|
|
||||||
#define BLTOUCH
|
#define BLTOUCH
|
||||||
=======
|
|
||||||
//#define BLTOUCH
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Touch-MI Probe by hotends.fr
|
* Touch-MI Probe by hotends.fr
|
||||||
@ -1111,11 +991,7 @@
|
|||||||
*
|
*
|
||||||
* Specify a Probe position as { X, Y, Z }
|
* Specify a Probe position as { X, Y, Z }
|
||||||
*/
|
*/
|
||||||
<<<<<<< HEAD
|
|
||||||
#define NOZZLE_TO_PROBE_OFFSET { -33, -37, -1 }
|
#define NOZZLE_TO_PROBE_OFFSET { -33, -37, -1 }
|
||||||
=======
|
|
||||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
|
|
||||||
// Most probes should stay away from the edges of the bed, but
|
// Most probes should stay away from the edges of the bed, but
|
||||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||||
@ -1215,22 +1091,14 @@
|
|||||||
// @section machine
|
// @section machine
|
||||||
|
|
||||||
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
|
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
|
||||||
<<<<<<< HEAD
|
|
||||||
#define INVERT_X_DIR true
|
#define INVERT_X_DIR true
|
||||||
=======
|
|
||||||
#define INVERT_X_DIR false
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
#define INVERT_Y_DIR true
|
#define INVERT_Y_DIR true
|
||||||
#define INVERT_Z_DIR false
|
#define INVERT_Z_DIR false
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
|
||||||
// For direct drive extruder v9 set to true, for geared extruder set to false.
|
// For direct drive extruder v9 set to true, for geared extruder set to false.
|
||||||
<<<<<<< HEAD
|
|
||||||
#define INVERT_E0_DIR true
|
#define INVERT_E0_DIR true
|
||||||
=======
|
|
||||||
#define INVERT_E0_DIR false
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
#define INVERT_E1_DIR false
|
#define INVERT_E1_DIR false
|
||||||
#define INVERT_E2_DIR false
|
#define INVERT_E2_DIR false
|
||||||
#define INVERT_E3_DIR false
|
#define INVERT_E3_DIR false
|
||||||
@ -1268,11 +1136,7 @@
|
|||||||
#define Z_MIN_POS 0
|
#define Z_MIN_POS 0
|
||||||
#define X_MAX_POS X_BED_SIZE
|
#define X_MAX_POS X_BED_SIZE
|
||||||
#define Y_MAX_POS Y_BED_SIZE
|
#define Y_MAX_POS Y_BED_SIZE
|
||||||
<<<<<<< HEAD
|
|
||||||
#define Z_MAX_POS 165
|
#define Z_MAX_POS 165
|
||||||
=======
|
|
||||||
#define Z_MAX_POS 200
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Software Endstops
|
* Software Endstops
|
||||||
@ -1376,22 +1240,14 @@
|
|||||||
//#define AUTO_BED_LEVELING_3POINT
|
//#define AUTO_BED_LEVELING_3POINT
|
||||||
//#define AUTO_BED_LEVELING_LINEAR
|
//#define AUTO_BED_LEVELING_LINEAR
|
||||||
//#define AUTO_BED_LEVELING_BILINEAR
|
//#define AUTO_BED_LEVELING_BILINEAR
|
||||||
<<<<<<< HEAD
|
|
||||||
#define AUTO_BED_LEVELING_UBL
|
#define AUTO_BED_LEVELING_UBL
|
||||||
=======
|
|
||||||
//#define AUTO_BED_LEVELING_UBL
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
//#define MESH_BED_LEVELING
|
//#define MESH_BED_LEVELING
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Normally G28 leaves leveling disabled on completion. Enable
|
* Normally G28 leaves leveling disabled on completion. Enable
|
||||||
* this option to have G28 restore the prior leveling state.
|
* this option to have G28 restore the prior leveling state.
|
||||||
*/
|
*/
|
||||||
<<<<<<< HEAD
|
|
||||||
#define RESTORE_LEVELING_AFTER_G28
|
#define RESTORE_LEVELING_AFTER_G28
|
||||||
=======
|
|
||||||
//#define RESTORE_LEVELING_AFTER_G28
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Enable detailed logging of G28, G29, M48, etc.
|
* Enable detailed logging of G28, G29, M48, etc.
|
||||||
@ -1415,21 +1271,12 @@
|
|||||||
/**
|
/**
|
||||||
* Enable the G26 Mesh Validation Pattern tool.
|
* Enable the G26 Mesh Validation Pattern tool.
|
||||||
*/
|
*/
|
||||||
<<<<<<< HEAD
|
|
||||||
#define G26_MESH_VALIDATION
|
#define G26_MESH_VALIDATION
|
||||||
#if ENABLED(G26_MESH_VALIDATION)
|
#if ENABLED(G26_MESH_VALIDATION)
|
||||||
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
|
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
|
||||||
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
|
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
|
||||||
#define MESH_TEST_HOTEND_TEMP 235 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
|
#define MESH_TEST_HOTEND_TEMP 235 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
|
||||||
#define MESH_TEST_BED_TEMP 80 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
|
#define MESH_TEST_BED_TEMP 80 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
|
||||||
=======
|
|
||||||
//#define G26_MESH_VALIDATION
|
|
||||||
#if ENABLED(G26_MESH_VALIDATION)
|
|
||||||
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
|
|
||||||
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
|
|
||||||
#define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
|
|
||||||
#define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
#define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool.
|
#define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool.
|
||||||
#define G26_RETRACT_MULTIPLIER 1.0 // G26 Q (retraction) used by default between mesh test elements.
|
#define G26_RETRACT_MULTIPLIER 1.0 // G26 Q (retraction) used by default between mesh test elements.
|
||||||
#endif
|
#endif
|
||||||
@ -1469,15 +1316,9 @@
|
|||||||
//========================= Unified Bed Leveling ============================
|
//========================= Unified Bed Leveling ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
<<<<<<< HEAD
|
|
||||||
#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||||
|
|
||||||
#define MESH_INSET 5 // Set Mesh bounds as an inset region of the bed
|
#define MESH_INSET 5 // Set Mesh bounds as an inset region of the bed
|
||||||
=======
|
|
||||||
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
|
||||||
|
|
||||||
#define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||||
|
|
||||||
@ -1505,11 +1346,7 @@
|
|||||||
* Add a bed leveling sub-menu for ABL or MBL.
|
* Add a bed leveling sub-menu for ABL or MBL.
|
||||||
* Include a guided procedure if manual probing is enabled.
|
* Include a guided procedure if manual probing is enabled.
|
||||||
*/
|
*/
|
||||||
<<<<<<< HEAD
|
|
||||||
#define LCD_BED_LEVELING
|
#define LCD_BED_LEVELING
|
||||||
=======
|
|
||||||
//#define LCD_BED_LEVELING
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
|
|
||||||
#if ENABLED(LCD_BED_LEVELING)
|
#if ENABLED(LCD_BED_LEVELING)
|
||||||
#define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis.
|
#define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis.
|
||||||
@ -1554,11 +1391,7 @@
|
|||||||
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
|
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
|
||||||
// - Prevent Z homing when the Z probe is outside bed area.
|
// - Prevent Z homing when the Z probe is outside bed area.
|
||||||
//
|
//
|
||||||
<<<<<<< HEAD
|
|
||||||
#define Z_SAFE_HOMING
|
#define Z_SAFE_HOMING
|
||||||
=======
|
|
||||||
//#define Z_SAFE_HOMING
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
|
|
||||||
#if ENABLED(Z_SAFE_HOMING)
|
#if ENABLED(Z_SAFE_HOMING)
|
||||||
#define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28).
|
#define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28).
|
||||||
@ -1644,16 +1477,9 @@
|
|||||||
* M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes)
|
* M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes)
|
||||||
* M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.)
|
* M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.)
|
||||||
*/
|
*/
|
||||||
<<<<<<< HEAD
|
|
||||||
#define EEPROM_SETTINGS // Persistent storage with M500 and M501
|
#define EEPROM_SETTINGS // Persistent storage with M500 and M501
|
||||||
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
|
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
|
||||||
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
|
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
|
||||||
=======
|
|
||||||
//#define EEPROM_SETTINGS // Persistent storage with M500 and M501
|
|
||||||
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
|
|
||||||
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
|
|
||||||
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
#if ENABLED(EEPROM_SETTINGS)
|
#if ENABLED(EEPROM_SETTINGS)
|
||||||
//#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.
|
//#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.
|
||||||
#endif
|
#endif
|
||||||
@ -1682,7 +1508,6 @@
|
|||||||
|
|
||||||
// Preheat Constants
|
// Preheat Constants
|
||||||
#define PREHEAT_1_LABEL "PLA"
|
#define PREHEAT_1_LABEL "PLA"
|
||||||
<<<<<<< HEAD
|
|
||||||
#define PREHEAT_1_TEMP_HOTEND 205
|
#define PREHEAT_1_TEMP_HOTEND 205
|
||||||
#define PREHEAT_1_TEMP_BED 60
|
#define PREHEAT_1_TEMP_BED 60
|
||||||
#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
|
#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
|
||||||
@ -1690,15 +1515,6 @@
|
|||||||
#define PREHEAT_2_LABEL "PETG"
|
#define PREHEAT_2_LABEL "PETG"
|
||||||
#define PREHEAT_2_TEMP_HOTEND 230
|
#define PREHEAT_2_TEMP_HOTEND 230
|
||||||
#define PREHEAT_2_TEMP_BED 78
|
#define PREHEAT_2_TEMP_BED 78
|
||||||
=======
|
|
||||||
#define PREHEAT_1_TEMP_HOTEND 180
|
|
||||||
#define PREHEAT_1_TEMP_BED 70
|
|
||||||
#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
|
|
||||||
|
|
||||||
#define PREHEAT_2_LABEL "ABS"
|
|
||||||
#define PREHEAT_2_TEMP_HOTEND 240
|
|
||||||
#define PREHEAT_2_TEMP_BED 110
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||||
|
|
||||||
/**
|
/**
|
||||||
@ -1712,20 +1528,12 @@
|
|||||||
* P1 Raise the nozzle always to Z-park height.
|
* P1 Raise the nozzle always to Z-park height.
|
||||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||||
*/
|
*/
|
||||||
<<<<<<< HEAD
|
|
||||||
#define NOZZLE_PARK_FEATURE
|
#define NOZZLE_PARK_FEATURE
|
||||||
=======
|
|
||||||
//#define NOZZLE_PARK_FEATURE
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
|
|
||||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||||
// Specify a park position as { X, Y, Z_raise }
|
// Specify a park position as { X, Y, Z_raise }
|
||||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||||
<<<<<<< HEAD
|
|
||||||
#define NOZZLE_PARK_XY_FEEDRATE 80 // (mm/s) X and Y axes feedrate (also used for delta Z axis)
|
#define NOZZLE_PARK_XY_FEEDRATE 80 // (mm/s) X and Y axes feedrate (also used for delta Z axis)
|
||||||
=======
|
|
||||||
#define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis)
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
#define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers)
|
#define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers)
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
@ -1824,11 +1632,7 @@
|
|||||||
*
|
*
|
||||||
* View the current statistics with M78.
|
* View the current statistics with M78.
|
||||||
*/
|
*/
|
||||||
<<<<<<< HEAD
|
|
||||||
#define PRINTCOUNTER
|
#define PRINTCOUNTER
|
||||||
=======
|
|
||||||
//#define PRINTCOUNTER
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
|
|
||||||
//=============================================================================
|
//=============================================================================
|
||||||
//============================= LCD and SD support ============================
|
//============================= LCD and SD support ============================
|
||||||
@ -1886,11 +1690,7 @@
|
|||||||
* you must uncomment the following option or it won't work.
|
* you must uncomment the following option or it won't work.
|
||||||
*
|
*
|
||||||
*/
|
*/
|
||||||
<<<<<<< HEAD
|
|
||||||
#define SDSUPPORT
|
#define SDSUPPORT
|
||||||
=======
|
|
||||||
//#define SDSUPPORT
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* SD CARD: SPI SPEED
|
* SD CARD: SPI SPEED
|
||||||
@ -1907,11 +1707,7 @@
|
|||||||
*
|
*
|
||||||
* Use CRC checks and retries on the SD communication.
|
* Use CRC checks and retries on the SD communication.
|
||||||
*/
|
*/
|
||||||
<<<<<<< HEAD
|
|
||||||
#define SD_CHECK_AND_RETRY
|
#define SD_CHECK_AND_RETRY
|
||||||
=======
|
|
||||||
//#define SD_CHECK_AND_RETRY
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* LCD Menu Items
|
* LCD Menu Items
|
||||||
@ -1928,21 +1724,13 @@
|
|||||||
// This option overrides the default number of encoder pulses needed to
|
// This option overrides the default number of encoder pulses needed to
|
||||||
// produce one step. Should be increased for high-resolution encoders.
|
// produce one step. Should be increased for high-resolution encoders.
|
||||||
//
|
//
|
||||||
<<<<<<< HEAD
|
|
||||||
#define ENCODER_PULSES_PER_STEP 4
|
#define ENCODER_PULSES_PER_STEP 4
|
||||||
=======
|
|
||||||
//#define ENCODER_PULSES_PER_STEP 4
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
|
|
||||||
//
|
//
|
||||||
// Use this option to override the number of step signals required to
|
// Use this option to override the number of step signals required to
|
||||||
// move between next/prev menu items.
|
// move between next/prev menu items.
|
||||||
//
|
//
|
||||||
<<<<<<< HEAD
|
|
||||||
#define ENCODER_STEPS_PER_MENU_ITEM 1
|
#define ENCODER_STEPS_PER_MENU_ITEM 1
|
||||||
=======
|
|
||||||
//#define ENCODER_STEPS_PER_MENU_ITEM 1
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Encoder Direction Options
|
* Encoder Direction Options
|
||||||
@ -1959,11 +1747,7 @@
|
|||||||
//
|
//
|
||||||
// Set this option if CLOCKWISE causes values to DECREASE
|
// Set this option if CLOCKWISE causes values to DECREASE
|
||||||
//
|
//
|
||||||
<<<<<<< HEAD
|
|
||||||
#define REVERSE_ENCODER_DIRECTION
|
#define REVERSE_ENCODER_DIRECTION
|
||||||
=======
|
|
||||||
//#define REVERSE_ENCODER_DIRECTION
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
|
|
||||||
//
|
//
|
||||||
// This option reverses the encoder direction for navigating LCD menus.
|
// This option reverses the encoder direction for navigating LCD menus.
|
||||||
@ -1986,11 +1770,7 @@
|
|||||||
//
|
//
|
||||||
// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu.
|
// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu.
|
||||||
//
|
//
|
||||||
<<<<<<< HEAD
|
|
||||||
#define INDIVIDUAL_AXIS_HOMING_MENU
|
#define INDIVIDUAL_AXIS_HOMING_MENU
|
||||||
=======
|
|
||||||
//#define INDIVIDUAL_AXIS_HOMING_MENU
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
|
|
||||||
//
|
//
|
||||||
// SPEAKER/BUZZER
|
// SPEAKER/BUZZER
|
||||||
@ -2161,11 +1941,7 @@
|
|||||||
// RepRapDiscount FULL GRAPHIC Smart Controller
|
// RepRapDiscount FULL GRAPHIC Smart Controller
|
||||||
// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
|
// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
|
||||||
//
|
//
|
||||||
<<<<<<< HEAD
|
|
||||||
#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
|
#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
|
||||||
=======
|
|
||||||
//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
|
|
||||||
//
|
//
|
||||||
// ReprapWorld Graphical LCD
|
// ReprapWorld Graphical LCD
|
||||||
@ -2216,13 +1992,10 @@
|
|||||||
//
|
//
|
||||||
//#define LCD_FOR_MELZI
|
//#define LCD_FOR_MELZI
|
||||||
|
|
||||||
<<<<<<< HEAD
|
|
||||||
//#define ST7920_DELAY_1 DELAY_NS(0)
|
//#define ST7920_DELAY_1 DELAY_NS(0)
|
||||||
//#define ST7920_DELAY_2 DELAY_NS(200)
|
//#define ST7920_DELAY_2 DELAY_NS(200)
|
||||||
//#define ST7920_DELAY_3 DELAY_NS(200)
|
//#define ST7920_DELAY_3 DELAY_NS(200)
|
||||||
|
|
||||||
=======
|
|
||||||
>>>>>>> 2.0.5.3
|
|
||||||
//
|
//
|
||||||
// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder
|
// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder
|
||||||
// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1)
|
// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1)
|
||||||
|
|||||||
Loading…
x
Reference in New Issue
Block a user