Merge pull request #9042 from thinkyhead/bf2_M701_M702
[2.0.x] Improved Pause/Load/Unload, M701-M702
This commit is contained in:
Scott Lahteine
GitHub
commit
1746a7352e
@ -122,7 +122,7 @@ script:
|
||||
- opt_enable ULTIMAKERCONTROLLER SDSUPPORT
|
||||
- opt_enable PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE PCA9632 USE_XMAX_PLUG
|
||||
- opt_enable_adv BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS
|
||||
- opt_enable_adv ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE LCD_INFO_MENU M114_DETAIL
|
||||
- opt_enable_adv ADVANCED_PAUSE_FEATURE FILAMENT_LOAD_UNLOAD_GCODES PARK_HEAD_ON_PAUSE LCD_INFO_MENU M114_DETAIL
|
||||
- opt_set_adv PWM_MOTOR_CURRENT {1300,1300,1250}
|
||||
- opt_set_adv I2C_SLAVE_ADDRESS 63
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
|
||||
@ -881,29 +881,38 @@
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
|
||||
// It is a short retract used immediately after print interrupt before move to filament exchange position
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
|
||||
// Longer length for bowden printers to unload filament from whole bowden tube,
|
||||
// shorter length for printers without bowden to unload filament from extruder only,
|
||||
// 0 to disable unloading for manual unloading
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
|
||||
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
|
||||
// Short or zero length for printers without bowden where loading is not used
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is loaded over the hotend,
|
||||
// 0 to disable for manual extrusion
|
||||
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
|
||||
// or until outcoming filament color is not clear for filament color change
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // Turn off nozzle if user doesn't change filament within this time limit in seconds
|
||||
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
|
||||
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
|
||||
//#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
@ -191,10 +191,6 @@ volatile bool wait_for_heatup = true;
|
||||
millis_t max_inactive_time = 0,
|
||||
stepper_inactive_time = (DEFAULT_STEPPER_DEACTIVE_TIME) * 1000UL;
|
||||
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
AdvancedPauseMenuResponse advanced_pause_menu_response;
|
||||
#endif
|
||||
|
||||
#ifdef CHDK
|
||||
millis_t chdkHigh = 0;
|
||||
bool chdkActive = false;
|
||||
@ -308,6 +304,16 @@ void disable_e_steppers() {
|
||||
disable_E4();
|
||||
}
|
||||
|
||||
void disable_e_stepper(const uint8_t e) {
|
||||
switch (e) {
|
||||
case 0: disable_E0(); break;
|
||||
case 1: disable_E1(); break;
|
||||
case 2: disable_E2(); break;
|
||||
case 3: disable_E3(); break;
|
||||
case 4: disable_E4(); break;
|
||||
}
|
||||
}
|
||||
|
||||
void disable_all_steppers() {
|
||||
disable_X();
|
||||
disable_Y();
|
||||
|
||||
@ -159,6 +159,7 @@ void manage_inactivity(bool ignore_stepper_queue = false);
|
||||
#define _AXIS(AXIS) AXIS ##_AXIS
|
||||
|
||||
void enable_all_steppers();
|
||||
void disable_e_stepper(const uint8_t e);
|
||||
void disable_e_steppers();
|
||||
void disable_all_steppers();
|
||||
|
||||
@ -198,15 +199,6 @@ extern millis_t max_inactive_time, stepper_inactive_time;
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
enum AdvancedPauseMenuResponse {
|
||||
ADVANCED_PAUSE_RESPONSE_WAIT_FOR,
|
||||
ADVANCED_PAUSE_RESPONSE_EXTRUDE_MORE,
|
||||
ADVANCED_PAUSE_RESPONSE_RESUME_PRINT
|
||||
};
|
||||
extern AdvancedPauseMenuResponse advanced_pause_menu_response;
|
||||
#endif
|
||||
|
||||
#if ENABLED(PID_EXTRUSION_SCALING)
|
||||
extern int lpq_len;
|
||||
#endif
|
||||
|
||||
@ -881,29 +881,38 @@
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
|
||||
// It is a short retract used immediately after print interrupt before move to filament exchange position
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
|
||||
// Longer length for bowden printers to unload filament from whole bowden tube,
|
||||
// shorter length for printers without bowden to unload filament from extruder only,
|
||||
// 0 to disable unloading for manual unloading
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
|
||||
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
|
||||
// Short or zero length for printers without bowden where loading is not used
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is loaded over the hotend,
|
||||
// 0 to disable for manual extrusion
|
||||
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
|
||||
// or until outcoming filament color is not clear for filament color change
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // Turn off nozzle if user doesn't change filament within this time limit in seconds
|
||||
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
|
||||
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
|
||||
//#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
@ -881,29 +881,38 @@
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
|
||||
// It is a short retract used immediately after print interrupt before move to filament exchange position
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
|
||||
// Longer length for bowden printers to unload filament from whole bowden tube,
|
||||
// shorter length for printers without bowden to unload filament from extruder only,
|
||||
// 0 to disable unloading for manual unloading
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
|
||||
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
|
||||
// Short or zero length for printers without bowden where loading is not used
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is loaded over the hotend,
|
||||
// 0 to disable for manual extrusion
|
||||
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
|
||||
// or until outcoming filament color is not clear for filament color change
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // Turn off nozzle if user doesn't change filament within this time limit in seconds
|
||||
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
|
||||
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
|
||||
//#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
@ -881,29 +881,38 @@
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
|
||||
// It is a short retract used immediately after print interrupt before move to filament exchange position
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
|
||||
// Longer length for bowden printers to unload filament from whole bowden tube,
|
||||
// shorter length for printers without bowden to unload filament from extruder only,
|
||||
// 0 to disable unloading for manual unloading
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
|
||||
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
|
||||
// Short or zero length for printers without bowden where loading is not used
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is loaded over the hotend,
|
||||
// 0 to disable for manual extrusion
|
||||
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
|
||||
// or until outcoming filament color is not clear for filament color change
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // Turn off nozzle if user doesn't change filament within this time limit in seconds
|
||||
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
|
||||
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
|
||||
//#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
@ -881,29 +881,38 @@
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
|
||||
// It is a short retract used immediately after print interrupt before move to filament exchange position
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
|
||||
// Longer length for bowden printers to unload filament from whole bowden tube,
|
||||
// shorter length for printers without bowden to unload filament from extruder only,
|
||||
// 0 to disable unloading for manual unloading
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
|
||||
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
|
||||
// Short or zero length for printers without bowden where loading is not used
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is loaded over the hotend,
|
||||
// 0 to disable for manual extrusion
|
||||
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
|
||||
// or until outcoming filament color is not clear for filament color change
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // Turn off nozzle if user doesn't change filament within this time limit in seconds
|
||||
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
|
||||
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
|
||||
//#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
@ -882,29 +882,38 @@
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
|
||||
// It is a short retract used immediately after print interrupt before move to filament exchange position
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
|
||||
// Longer length for bowden printers to unload filament from whole bowden tube,
|
||||
// shorter length for printers without bowden to unload filament from extruder only,
|
||||
// 0 to disable unloading for manual unloading
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
|
||||
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
|
||||
// Short or zero length for printers without bowden where loading is not used
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is loaded over the hotend,
|
||||
// 0 to disable for manual extrusion
|
||||
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
|
||||
// or until outcoming filament color is not clear for filament color change
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // Turn off nozzle if user doesn't change filament within this time limit in seconds
|
||||
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
|
||||
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
|
||||
//#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
@ -881,29 +881,38 @@
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
|
||||
// It is a short retract used immediately after print interrupt before move to filament exchange position
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
|
||||
// Longer length for bowden printers to unload filament from whole bowden tube,
|
||||
// shorter length for printers without bowden to unload filament from extruder only,
|
||||
// 0 to disable unloading for manual unloading
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
|
||||
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
|
||||
// Short or zero length for printers without bowden where loading is not used
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is loaded over the hotend,
|
||||
// 0 to disable for manual extrusion
|
||||
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
|
||||
// or until outcoming filament color is not clear for filament color change
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // Turn off nozzle if user doesn't change filament within this time limit in seconds
|
||||
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
|
||||
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
|
||||
//#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
@ -881,29 +881,38 @@
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
|
||||
// It is a short retract used immediately after print interrupt before move to filament exchange position
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
|
||||
// Longer length for bowden printers to unload filament from whole bowden tube,
|
||||
// shorter length for printers without bowden to unload filament from extruder only,
|
||||
// 0 to disable unloading for manual unloading
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
|
||||
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
|
||||
// Short or zero length for printers without bowden where loading is not used
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is loaded over the hotend,
|
||||
// 0 to disable for manual extrusion
|
||||
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
|
||||
// or until outcoming filament color is not clear for filament color change
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // Turn off nozzle if user doesn't change filament within this time limit in seconds
|
||||
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
|
||||
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
|
||||
//#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
@ -881,29 +881,38 @@
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
|
||||
// It is a short retract used immediately after print interrupt before move to filament exchange position
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
|
||||
// Longer length for bowden printers to unload filament from whole bowden tube,
|
||||
// shorter length for printers without bowden to unload filament from extruder only,
|
||||
// 0 to disable unloading for manual unloading
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
|
||||
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
|
||||
// Short or zero length for printers without bowden where loading is not used
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is loaded over the hotend,
|
||||
// 0 to disable for manual extrusion
|
||||
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
|
||||
// or until outcoming filament color is not clear for filament color change
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // Turn off nozzle if user doesn't change filament within this time limit in seconds
|
||||
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
|
||||
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
|
||||
//#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
@ -881,29 +881,38 @@
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 1 // Initial retract in mm
|
||||
// It is a short retract used immediately after print interrupt before move to filament exchange position
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
|
||||
//#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
|
||||
// Longer length for bowden printers to unload filament from whole bowden tube,
|
||||
// shorter length for printers without bowden to unload filament from extruder only,
|
||||
// 0 to disable unloading for manual unloading
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
|
||||
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
|
||||
// Short or zero length for printers without bowden where loading is not used
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is loaded over the hotend,
|
||||
// 0 to disable for manual extrusion
|
||||
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
|
||||
// or until outcoming filament color is not clear for filament color change
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // Turn off nozzle if user doesn't change filament within this time limit in seconds
|
||||
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
|
||||
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
|
||||
//#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 1 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
//#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
@ -881,29 +881,38 @@
|
||||
*/
|
||||
#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 4 // Initial retract in mm
|
||||
// It is a short retract used immediately after print interrupt before move to filament exchange position
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 420 // Unload filament length from hotend in mm
|
||||
// Longer length for bowden printers to unload filament from whole bowden tube,
|
||||
// shorter length for printers without bowden to unload filament from extruder only,
|
||||
// 0 to disable unloading for manual unloading
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 8 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
|
||||
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
|
||||
// Short or zero length for printers without bowden where loading is not used
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is loaded over the hotend,
|
||||
// 0 to disable for manual extrusion
|
||||
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
|
||||
// or until outcoming filament color is not clear for filament color change
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 120 // Turn off nozzle if user doesn't change filament within this time limit in seconds
|
||||
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 3 // Number of alert beeps before printer goes quiet
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
|
||||
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
|
||||
#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 4 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 420 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 8 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 120 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 6 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
@ -881,29 +881,38 @@
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
|
||||
// It is a short retract used immediately after print interrupt before move to filament exchange position
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
|
||||
// Longer length for bowden printers to unload filament from whole bowden tube,
|
||||
// shorter length for printers without bowden to unload filament from extruder only,
|
||||
// 0 to disable unloading for manual unloading
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
|
||||
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
|
||||
// Short or zero length for printers without bowden where loading is not used
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is loaded over the hotend,
|
||||
// 0 to disable for manual extrusion
|
||||
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
|
||||
// or until outcoming filament color is not clear for filament color change
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // Turn off nozzle if user doesn't change filament within this time limit in seconds
|
||||
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
|
||||
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
|
||||
//#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
@ -881,29 +881,38 @@
|
||||
*/
|
||||
#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
|
||||
// It is a short retract used immediately after print interrupt before move to filament exchange position
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
|
||||
// Longer length for bowden printers to unload filament from whole bowden tube,
|
||||
// shorter length for printers without bowden to unload filament from extruder only,
|
||||
// 0 to disable unloading for manual unloading
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
|
||||
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
|
||||
// Short or zero length for printers without bowden where loading is not used
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is loaded over the hotend,
|
||||
// 0 to disable for manual extrusion
|
||||
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
|
||||
// or until outcoming filament color is not clear for filament color change
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // Turn off nozzle if user doesn't change filament within this time limit in seconds
|
||||
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
|
||||
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
|
||||
#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
@ -881,29 +881,38 @@
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
|
||||
// It is a short retract used immediately after print interrupt before move to filament exchange position
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
|
||||
// Longer length for bowden printers to unload filament from whole bowden tube,
|
||||
// shorter length for printers without bowden to unload filament from extruder only,
|
||||
// 0 to disable unloading for manual unloading
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
|
||||
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
|
||||
// Short or zero length for printers without bowden where loading is not used
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is loaded over the hotend,
|
||||
// 0 to disable for manual extrusion
|
||||
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
|
||||
// or until outcoming filament color is not clear for filament color change
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // Turn off nozzle if user doesn't change filament within this time limit in seconds
|
||||
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
|
||||
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
|
||||
//#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
@ -882,29 +882,38 @@
|
||||
*/
|
||||
#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
|
||||
// It is a short retract used immediately after print interrupt before move to filament exchange position
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
|
||||
// Longer length for bowden printers to unload filament from whole bowden tube,
|
||||
// shorter length for printers without bowden to unload filament from extruder only,
|
||||
// 0 to disable unloading for manual unloading
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
|
||||
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
|
||||
// Short or zero length for printers without bowden where loading is not used
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is loaded over the hotend,
|
||||
// 0 to disable for manual extrusion
|
||||
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
|
||||
// or until outcoming filament color is not clear for filament color change
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // Turn off nozzle if user doesn't change filament within this time limit in seconds
|
||||
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
|
||||
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
|
||||
//#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
@ -881,29 +881,38 @@
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
|
||||
// It is a short retract used immediately after print interrupt before move to filament exchange position
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
|
||||
// Longer length for bowden printers to unload filament from whole bowden tube,
|
||||
// shorter length for printers without bowden to unload filament from extruder only,
|
||||
// 0 to disable unloading for manual unloading
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
|
||||
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
|
||||
// Short or zero length for printers without bowden where loading is not used
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is loaded over the hotend,
|
||||
// 0 to disable for manual extrusion
|
||||
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
|
||||
// or until outcoming filament color is not clear for filament color change
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // Turn off nozzle if user doesn't change filament within this time limit in seconds
|
||||
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
|
||||
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
|
||||
//#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
@ -881,29 +881,38 @@
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
|
||||
// It is a short retract used immediately after print interrupt before move to filament exchange position
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
|
||||
// Longer length for bowden printers to unload filament from whole bowden tube,
|
||||
// shorter length for printers without bowden to unload filament from extruder only,
|
||||
// 0 to disable unloading for manual unloading
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
|
||||
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
|
||||
// Short or zero length for printers without bowden where loading is not used
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is loaded over the hotend,
|
||||
// 0 to disable for manual extrusion
|
||||
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
|
||||
// or until outcoming filament color is not clear for filament color change
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // Turn off nozzle if user doesn't change filament within this time limit in seconds
|
||||
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
|
||||
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
|
||||
//#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
@ -882,29 +882,38 @@
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
|
||||
// It is a short retract used immediately after print interrupt before move to filament exchange position
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
|
||||
// Longer length for bowden printers to unload filament from whole bowden tube,
|
||||
// shorter length for printers without bowden to unload filament from extruder only,
|
||||
// 0 to disable unloading for manual unloading
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
|
||||
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
|
||||
// Short or zero length for printers without bowden where loading is not used
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is loaded over the hotend,
|
||||
// 0 to disable for manual extrusion
|
||||
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
|
||||
// or until outcoming filament color is not clear for filament color change
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // Turn off nozzle if user doesn't change filament within this time limit in seconds
|
||||
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
|
||||
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
|
||||
//#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
@ -889,29 +889,38 @@
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
|
||||
// It is a short retract used immediately after print interrupt before move to filament exchange position
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
|
||||
// Longer length for bowden printers to unload filament from whole bowden tube,
|
||||
// shorter length for printers without bowden to unload filament from extruder only,
|
||||
// 0 to disable unloading for manual unloading
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
|
||||
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
|
||||
// Short or zero length for printers without bowden where loading is not used
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is loaded over the hotend,
|
||||
// 0 to disable for manual extrusion
|
||||
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
|
||||
// or until outcoming filament color is not clear for filament color change
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // Turn off nozzle if user doesn't change filament within this time limit in seconds
|
||||
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
|
||||
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
|
||||
//#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
@ -881,29 +881,38 @@
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
|
||||
// It is a short retract used immediately after print interrupt before move to filament exchange position
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
|
||||
// Longer length for bowden printers to unload filament from whole bowden tube,
|
||||
// shorter length for printers without bowden to unload filament from extruder only,
|
||||
// 0 to disable unloading for manual unloading
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
|
||||
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
|
||||
// Short or zero length for printers without bowden where loading is not used
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is loaded over the hotend,
|
||||
// 0 to disable for manual extrusion
|
||||
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
|
||||
// or until outcoming filament color is not clear for filament color change
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // Turn off nozzle if user doesn't change filament within this time limit in seconds
|
||||
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
|
||||
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
|
||||
//#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
@ -881,29 +881,38 @@
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
|
||||
// It is a short retract used immediately after print interrupt before move to filament exchange position
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
|
||||
// Longer length for bowden printers to unload filament from whole bowden tube,
|
||||
// shorter length for printers without bowden to unload filament from extruder only,
|
||||
// 0 to disable unloading for manual unloading
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
|
||||
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
|
||||
// Short or zero length for printers without bowden where loading is not used
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is loaded over the hotend,
|
||||
// 0 to disable for manual extrusion
|
||||
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
|
||||
// or until outcoming filament color is not clear for filament color change
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // Turn off nozzle if user doesn't change filament within this time limit in seconds
|
||||
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
|
||||
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
|
||||
//#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
@ -870,29 +870,38 @@
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
|
||||
// It is a short retract used immediately after print interrupt before move to filament exchange position
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
|
||||
// Longer length for bowden printers to unload filament from whole bowden tube,
|
||||
// shorter length for printers without bowden to unload filament from extruder only,
|
||||
// 0 to disable unloading for manual unloading
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
|
||||
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
|
||||
// Short or zero length for printers without bowden where loading is not used
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is loaded over the hotend,
|
||||
// 0 to disable for manual extrusion
|
||||
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
|
||||
// or until outcoming filament color is not clear for filament color change
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // Turn off nozzle if user doesn't change filament within this time limit in seconds
|
||||
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
|
||||
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
|
||||
//#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
@ -881,29 +881,38 @@
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
|
||||
// It is a short retract used immediately after print interrupt before move to filament exchange position
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
|
||||
// Longer length for bowden printers to unload filament from whole bowden tube,
|
||||
// shorter length for printers without bowden to unload filament from extruder only,
|
||||
// 0 to disable unloading for manual unloading
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
|
||||
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
|
||||
// Short or zero length for printers without bowden where loading is not used
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is loaded over the hotend,
|
||||
// 0 to disable for manual extrusion
|
||||
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
|
||||
// or until outcoming filament color is not clear for filament color change
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // Turn off nozzle if user doesn't change filament within this time limit in seconds
|
||||
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
|
||||
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
|
||||
//#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
@ -881,29 +881,38 @@
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
|
||||
// It is a short retract used immediately after print interrupt before move to filament exchange position
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
|
||||
// Longer length for bowden printers to unload filament from whole bowden tube,
|
||||
// shorter length for printers without bowden to unload filament from extruder only,
|
||||
// 0 to disable unloading for manual unloading
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
|
||||
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
|
||||
// Short or zero length for printers without bowden where loading is not used
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is loaded over the hotend,
|
||||
// 0 to disable for manual extrusion
|
||||
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
|
||||
// or until outcoming filament color is not clear for filament color change
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // Turn off nozzle if user doesn't change filament within this time limit in seconds
|
||||
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
|
||||
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
|
||||
//#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
@ -892,29 +892,38 @@
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
|
||||
// It is a short retract used immediately after print interrupt before move to filament exchange position
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
|
||||
// Longer length for bowden printers to unload filament from whole bowden tube,
|
||||
// shorter length for printers without bowden to unload filament from extruder only,
|
||||
// 0 to disable unloading for manual unloading
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
|
||||
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
|
||||
// Short or zero length for printers without bowden where loading is not used
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is loaded over the hotend,
|
||||
// 0 to disable for manual extrusion
|
||||
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
|
||||
// or until outcoming filament color is not clear for filament color change
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // Turn off nozzle if user doesn't change filament within this time limit in seconds
|
||||
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
|
||||
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
|
||||
//#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
@ -881,29 +881,38 @@
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 5 // Initial retract in mm
|
||||
// It is a short retract used immediately after print interrupt before move to filament exchange position
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 600 // Unload filament length from hotend in mm
|
||||
// Longer length for bowden printers to unload filament from whole bowden tube,
|
||||
// shorter length for printers without bowden to unload filament from extruder only,
|
||||
// 0 to disable unloading for manual unloading
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
|
||||
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
|
||||
// Short or zero length for printers without bowden where loading is not used
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 100 // Extrude filament length in mm after filament is loaded over the hotend,
|
||||
// 0 to disable for manual extrusion
|
||||
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
|
||||
// or until outcoming filament color is not clear for filament color change
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // Turn off nozzle if user doesn't change filament within this time limit in seconds
|
||||
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
|
||||
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
|
||||
//#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 5 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 600 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 100 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
@ -883,29 +883,38 @@
|
||||
*/
|
||||
#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
|
||||
// It is a short retract used immediately after print interrupt before move to filament exchange position
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
|
||||
// Longer length for bowden printers to unload filament from whole bowden tube,
|
||||
// shorter length for printers without bowden to unload filament from extruder only,
|
||||
// 0 to disable unloading for manual unloading
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
|
||||
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
|
||||
// Short or zero length for printers without bowden where loading is not used
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is loaded over the hotend,
|
||||
// 0 to disable for manual extrusion
|
||||
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
|
||||
// or until outcoming filament color is not clear for filament color change
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // Turn off nozzle if user doesn't change filament within this time limit in seconds
|
||||
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
|
||||
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
|
||||
//#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
@ -883,29 +883,38 @@
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
|
||||
// It is a short retract used immediately after print interrupt before move to filament exchange position
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
|
||||
// Longer length for bowden printers to unload filament from whole bowden tube,
|
||||
// shorter length for printers without bowden to unload filament from extruder only,
|
||||
// 0 to disable unloading for manual unloading
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
|
||||
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
|
||||
// Short or zero length for printers without bowden where loading is not used
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is loaded over the hotend,
|
||||
// 0 to disable for manual extrusion
|
||||
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
|
||||
// or until outcoming filament color is not clear for filament color change
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // Turn off nozzle if user doesn't change filament within this time limit in seconds
|
||||
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
|
||||
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
|
||||
//#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
@ -883,29 +883,38 @@
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
|
||||
// It is a short retract used immediately after print interrupt before move to filament exchange position
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
|
||||
// Longer length for bowden printers to unload filament from whole bowden tube,
|
||||
// shorter length for printers without bowden to unload filament from extruder only,
|
||||
// 0 to disable unloading for manual unloading
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
|
||||
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
|
||||
// Short or zero length for printers without bowden where loading is not used
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is loaded over the hotend,
|
||||
// 0 to disable for manual extrusion
|
||||
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
|
||||
// or until outcoming filament color is not clear for filament color change
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // Turn off nozzle if user doesn't change filament within this time limit in seconds
|
||||
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
|
||||
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
|
||||
//#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
@ -883,29 +883,38 @@
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
|
||||
// It is a short retract used immediately after print interrupt before move to filament exchange position
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
|
||||
// Longer length for bowden printers to unload filament from whole bowden tube,
|
||||
// shorter length for printers without bowden to unload filament from extruder only,
|
||||
// 0 to disable unloading for manual unloading
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
|
||||
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
|
||||
// Short or zero length for printers without bowden where loading is not used
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is loaded over the hotend,
|
||||
// 0 to disable for manual extrusion
|
||||
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
|
||||
// or until outcoming filament color is not clear for filament color change
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // Turn off nozzle if user doesn't change filament within this time limit in seconds
|
||||
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
|
||||
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
|
||||
//#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
@ -883,29 +883,38 @@
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
|
||||
// It is a short retract used immediately after print interrupt before move to filament exchange position
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
|
||||
// Longer length for bowden printers to unload filament from whole bowden tube,
|
||||
// shorter length for printers without bowden to unload filament from extruder only,
|
||||
// 0 to disable unloading for manual unloading
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
|
||||
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
|
||||
// Short or zero length for printers without bowden where loading is not used
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is loaded over the hotend,
|
||||
// 0 to disable for manual extrusion
|
||||
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
|
||||
// or until outcoming filament color is not clear for filament color change
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // Turn off nozzle if user doesn't change filament within this time limit in seconds
|
||||
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
|
||||
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
|
||||
//#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
@ -888,29 +888,38 @@
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
|
||||
// It is a short retract used immediately after print interrupt before move to filament exchange position
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
|
||||
// Longer length for bowden printers to unload filament from whole bowden tube,
|
||||
// shorter length for printers without bowden to unload filament from extruder only,
|
||||
// 0 to disable unloading for manual unloading
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
|
||||
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
|
||||
// Short or zero length for printers without bowden where loading is not used
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is loaded over the hotend,
|
||||
// 0 to disable for manual extrusion
|
||||
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
|
||||
// or until outcoming filament color is not clear for filament color change
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // Turn off nozzle if user doesn't change filament within this time limit in seconds
|
||||
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
|
||||
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
|
||||
//#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
@ -883,29 +883,38 @@
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
|
||||
// It is a short retract used immediately after print interrupt before move to filament exchange position
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
|
||||
// Longer length for bowden printers to unload filament from whole bowden tube,
|
||||
// shorter length for printers without bowden to unload filament from extruder only,
|
||||
// 0 to disable unloading for manual unloading
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
|
||||
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
|
||||
// Short or zero length for printers without bowden where loading is not used
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is loaded over the hotend,
|
||||
// 0 to disable for manual extrusion
|
||||
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
|
||||
// or until outcoming filament color is not clear for filament color change
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // Turn off nozzle if user doesn't change filament within this time limit in seconds
|
||||
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
|
||||
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
|
||||
//#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
@ -881,29 +881,38 @@
|
||||
*/
|
||||
#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
|
||||
// It is a short retract used immediately after print interrupt before move to filament exchange position
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
|
||||
// Longer length for bowden printers to unload filament from whole bowden tube,
|
||||
// shorter length for printers without bowden to unload filament from extruder only,
|
||||
// 0 to disable unloading for manual unloading
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
|
||||
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
|
||||
// Short or zero length for printers without bowden where loading is not used
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is loaded over the hotend,
|
||||
// 0 to disable for manual extrusion
|
||||
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
|
||||
// or until outcoming filament color is not clear for filament color change
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // Turn off nozzle if user doesn't change filament within this time limit in seconds
|
||||
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
|
||||
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
|
||||
#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
@ -881,29 +881,38 @@
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
|
||||
// It is a short retract used immediately after print interrupt before move to filament exchange position
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
|
||||
// Longer length for bowden printers to unload filament from whole bowden tube,
|
||||
// shorter length for printers without bowden to unload filament from extruder only,
|
||||
// 0 to disable unloading for manual unloading
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
|
||||
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
|
||||
// Short or zero length for printers without bowden where loading is not used
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is loaded over the hotend,
|
||||
// 0 to disable for manual extrusion
|
||||
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
|
||||
// or until outcoming filament color is not clear for filament color change
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // Turn off nozzle if user doesn't change filament within this time limit in seconds
|
||||
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
|
||||
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
|
||||
//#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
@ -881,29 +881,38 @@
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
|
||||
// It is a short retract used immediately after print interrupt before move to filament exchange position
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
|
||||
// Longer length for bowden printers to unload filament from whole bowden tube,
|
||||
// shorter length for printers without bowden to unload filament from extruder only,
|
||||
// 0 to disable unloading for manual unloading
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
|
||||
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
|
||||
// Short or zero length for printers without bowden where loading is not used
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is loaded over the hotend,
|
||||
// 0 to disable for manual extrusion
|
||||
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
|
||||
// or until outcoming filament color is not clear for filament color change
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // Turn off nozzle if user doesn't change filament within this time limit in seconds
|
||||
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
|
||||
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
|
||||
//#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
@ -882,29 +882,38 @@
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
|
||||
// It is a short retract used immediately after print interrupt before move to filament exchange position
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
|
||||
// Longer length for bowden printers to unload filament from whole bowden tube,
|
||||
// shorter length for printers without bowden to unload filament from extruder only,
|
||||
// 0 to disable unloading for manual unloading
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
|
||||
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
|
||||
// Short or zero length for printers without bowden where loading is not used
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is loaded over the hotend,
|
||||
// 0 to disable for manual extrusion
|
||||
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
|
||||
// or until outcoming filament color is not clear for filament color change
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // Turn off nozzle if user doesn't change filament within this time limit in seconds
|
||||
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
|
||||
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
|
||||
//#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
|
||||
@ -205,7 +205,15 @@
|
||||
#define MSG_ENDSTOPS_HIT "endstops hit: "
|
||||
#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
|
||||
#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
|
||||
#define MSG_TOO_COLD_FOR_M600 "M600 Hotend too cold to change filament"
|
||||
#define MSG_HOTEND_TOO_COLD "Hotend too cold"
|
||||
|
||||
#define MSG_FILAMENT_CHANGE_HEAT "Press button (or M108) to heat nozzle"
|
||||
#define MSG_FILAMENT_CHANGE_HEAT_LCD "Press button to heat nozzle"
|
||||
#define MSG_FILAMENT_CHANGE_HEAT_M108 "Send M108 to heat nozzle"
|
||||
#define MSG_FILAMENT_CHANGE_INSERT "Insert filament and press button (or M108)"
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_LCD "Insert filament and press button"
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_M108 "Insert filament and send M108"
|
||||
|
||||
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
|
||||
|
||||
#define MSG_ERR_EEPROM_WRITE "Error writing to EEPROM!"
|
||||
|
||||
@ -27,7 +27,7 @@
|
||||
|
||||
#include "../inc/MarlinConfig.h"
|
||||
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE) || ENABLED(PARK_HEAD_ON_PAUSE)
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
|
||||
#include "../Marlin.h"
|
||||
#include "../gcode/gcode.h"
|
||||
@ -56,6 +56,11 @@
|
||||
|
||||
static float resume_position[XYZE];
|
||||
|
||||
AdvancedPauseMenuResponse advanced_pause_menu_response;
|
||||
|
||||
float filament_change_unload_length[EXTRUDERS],
|
||||
filament_change_load_length[EXTRUDERS];
|
||||
|
||||
#if ENABLED(SDSUPPORT)
|
||||
#include "../sd/cardreader.h"
|
||||
#endif
|
||||
@ -70,68 +75,197 @@ static float resume_position[XYZE];
|
||||
const millis_t ms = millis();
|
||||
if (ELAPSED(ms, next_buzz)) {
|
||||
if (max_beep_count < 0 || runout_beep < max_beep_count + 5) { // Only beep as long as we're supposed to
|
||||
next_buzz = ms + ((max_beep_count < 0 || runout_beep < max_beep_count) ? 2500 : 400);
|
||||
BUZZ(300, 2000);
|
||||
next_buzz = ms + ((max_beep_count < 0 || runout_beep < max_beep_count) ? 1000 : 500);
|
||||
BUZZ(50, 880 - (runout_beep & 1) * 220);
|
||||
runout_beep++;
|
||||
}
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
static void ensure_safe_temperature() {
|
||||
bool heaters_heating = true;
|
||||
static bool ensure_safe_temperature(const AdvancedPauseMode mode=ADVANCED_PAUSE_MODE_PAUSE_PRINT) {
|
||||
|
||||
#if ENABLED(PREVENT_COLD_EXTRUSION)
|
||||
if (!DEBUGGING(DRYRUN) && thermalManager.targetTooColdToExtrude(active_extruder)) {
|
||||
SERIAL_ERROR_START();
|
||||
SERIAL_ERRORLNPGM(MSG_HOTEND_TOO_COLD);
|
||||
return false;
|
||||
}
|
||||
#endif
|
||||
|
||||
#if ENABLED(ULTIPANEL)
|
||||
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_WAIT_FOR_NOZZLES_TO_HEAT, mode);
|
||||
#else
|
||||
UNUSED(mode);
|
||||
#endif
|
||||
|
||||
wait_for_heatup = true; // M108 will clear this
|
||||
while (wait_for_heatup && heaters_heating) {
|
||||
idle();
|
||||
heaters_heating = false;
|
||||
HOTEND_LOOP() {
|
||||
if (thermalManager.degTargetHotend(e) && abs(thermalManager.degHotend(e) - thermalManager.degTargetHotend(e)) > TEMP_HYSTERESIS) {
|
||||
heaters_heating = true;
|
||||
#if ENABLED(ULTIPANEL)
|
||||
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_WAIT_FOR_NOZZLES_TO_HEAT);
|
||||
#endif
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
while (wait_for_heatup && thermalManager.wait_for_heating(active_extruder)) idle();
|
||||
const bool status = wait_for_heatup;
|
||||
wait_for_heatup = false;
|
||||
|
||||
return status;
|
||||
}
|
||||
|
||||
void do_pause_e_move(const float &length, const float fr) {
|
||||
current_position[E_AXIS] += length / planner.e_factor[active_extruder];
|
||||
static void do_pause_e_move(const float &length, const float &fr) {
|
||||
set_destination_from_current();
|
||||
#if IS_KINEMATIC
|
||||
planner.buffer_line_kinematic(destination, fr, active_extruder);
|
||||
#else
|
||||
destination[E_AXIS] += length / planner.e_factor[active_extruder];
|
||||
buffer_line_to_destination(fr);
|
||||
#endif
|
||||
stepper.synchronize();
|
||||
set_current_from_destination();
|
||||
}
|
||||
|
||||
bool load_filament(const float &load_length/*=0*/, const float &extrude_length/*=0*/, const int8_t max_beep_count/*=0*/,
|
||||
const bool show_lcd/*=false*/, const bool pause_for_user/*=false*/,
|
||||
const AdvancedPauseMode mode/*=ADVANCED_PAUSE_MODE_PAUSE_PRINT*/
|
||||
) {
|
||||
#if DISABLED(ULTIPANEL)
|
||||
UNUSED(show_lcd);
|
||||
#endif
|
||||
|
||||
if (!ensure_safe_temperature(mode)) {
|
||||
#if ENABLED(ULTIPANEL)
|
||||
if (show_lcd) // Show status screen
|
||||
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_STATUS);
|
||||
#endif
|
||||
|
||||
return false;
|
||||
}
|
||||
|
||||
if (pause_for_user) {
|
||||
#if ENABLED(ULTIPANEL)
|
||||
if (show_lcd) // Show "insert filament"
|
||||
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_INSERT, mode);
|
||||
#endif
|
||||
SERIAL_ECHO_START();
|
||||
SERIAL_ECHOLNPGM(MSG_FILAMENT_CHANGE_INSERT);
|
||||
|
||||
#if HAS_BUZZER
|
||||
filament_change_beep(max_beep_count, true);
|
||||
#else
|
||||
UNUSED(max_beep_count);
|
||||
#endif
|
||||
|
||||
KEEPALIVE_STATE(PAUSED_FOR_USER);
|
||||
wait_for_user = true; // LCD click or M108 will clear this
|
||||
while (wait_for_user) {
|
||||
#if HAS_BUZZER
|
||||
filament_change_beep(max_beep_count);
|
||||
#endif
|
||||
idle(true);
|
||||
}
|
||||
KEEPALIVE_STATE(IN_HANDLER);
|
||||
}
|
||||
|
||||
#if ENABLED(ULTIPANEL)
|
||||
if (show_lcd) // Show "load" message
|
||||
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_LOAD, mode);
|
||||
#endif
|
||||
|
||||
// Load filament
|
||||
do_pause_e_move(load_length, FILAMENT_CHANGE_LOAD_FEEDRATE);
|
||||
|
||||
do {
|
||||
if (extrude_length > 0) {
|
||||
// "Wait for filament purge"
|
||||
#if ENABLED(ULTIPANEL)
|
||||
if (show_lcd)
|
||||
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_PURGE, mode);
|
||||
#endif
|
||||
|
||||
// Extrude filament to get into hotend
|
||||
do_pause_e_move(extrude_length, ADVANCED_PAUSE_EXTRUDE_FEEDRATE);
|
||||
}
|
||||
|
||||
// Show "Extrude More" / "Resume" menu and wait for reply
|
||||
#if ENABLED(ULTIPANEL)
|
||||
if (show_lcd) {
|
||||
KEEPALIVE_STATE(PAUSED_FOR_USER);
|
||||
wait_for_user = false;
|
||||
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_OPTION, mode);
|
||||
while (advanced_pause_menu_response == ADVANCED_PAUSE_RESPONSE_WAIT_FOR) idle(true);
|
||||
KEEPALIVE_STATE(IN_HANDLER);
|
||||
}
|
||||
#endif
|
||||
|
||||
// Keep looping if "Extrude More" was selected
|
||||
} while (
|
||||
#if ENABLED(ULTIPANEL)
|
||||
show_lcd && advanced_pause_menu_response == ADVANCED_PAUSE_RESPONSE_EXTRUDE_MORE
|
||||
#else
|
||||
0
|
||||
#endif
|
||||
);
|
||||
|
||||
return true;
|
||||
}
|
||||
|
||||
bool unload_filament(const float &unload_length, const bool show_lcd/*=false*/,
|
||||
const AdvancedPauseMode mode/*=ADVANCED_PAUSE_MODE_PAUSE_PRINT*/
|
||||
) {
|
||||
if (!ensure_safe_temperature(mode)) {
|
||||
#if ENABLED(ULTIPANEL)
|
||||
if (show_lcd) // Show status screen
|
||||
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_STATUS);
|
||||
#endif
|
||||
|
||||
return false;
|
||||
}
|
||||
|
||||
#if DISABLED(ULTIPANEL)
|
||||
UNUSED(show_lcd);
|
||||
#else
|
||||
if (show_lcd)
|
||||
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_UNLOAD, mode);
|
||||
#endif
|
||||
|
||||
// Retract filament
|
||||
do_pause_e_move(-FILAMENT_UNLOAD_RETRACT_LENGTH, PAUSE_PARK_RETRACT_FEEDRATE);
|
||||
|
||||
// Wait for filament to cool
|
||||
safe_delay(FILAMENT_UNLOAD_DELAY);
|
||||
|
||||
// Quickly purge
|
||||
do_pause_e_move(FILAMENT_UNLOAD_RETRACT_LENGTH + FILAMENT_UNLOAD_PURGE_LENGTH, planner.max_feedrate_mm_s[E_AXIS]);
|
||||
|
||||
// Unload filament
|
||||
do_pause_e_move(unload_length, FILAMENT_CHANGE_UNLOAD_FEEDRATE);
|
||||
|
||||
// Disable extruders steppers for manual filament changing (only on boards that have separate ENABLE_PINS)
|
||||
#if E0_ENABLE_PIN != X_ENABLE_PIN && E1_ENABLE_PIN != Y_ENABLE_PIN
|
||||
disable_e_stepper(active_extruder);
|
||||
safe_delay(100);
|
||||
#endif
|
||||
|
||||
return true;
|
||||
}
|
||||
|
||||
// public:
|
||||
|
||||
uint8_t did_pause_print = 0;
|
||||
|
||||
bool pause_print(const float &retract, const point_t &park_point, const float &unload_length/*=0*/,
|
||||
const int8_t max_beep_count/*=0*/, const bool show_lcd/*=false*/
|
||||
) {
|
||||
bool pause_print(const float &retract, const point_t &park_point, const float &unload_length/*=0*/, const bool show_lcd/*=false*/) {
|
||||
if (did_pause_print) return false; // already paused
|
||||
|
||||
#ifdef ACTION_ON_PAUSE
|
||||
SERIAL_ECHOLNPGM("//action:" ACTION_ON_PAUSE);
|
||||
#endif
|
||||
|
||||
if (!DEBUGGING(DRYRUN) && unload_length != 0) {
|
||||
#if ENABLED(PREVENT_COLD_EXTRUSION)
|
||||
if (!thermalManager.allow_cold_extrude &&
|
||||
thermalManager.degTargetHotend(active_extruder) < thermalManager.extrude_min_temp) {
|
||||
SERIAL_ERROR_START();
|
||||
SERIAL_ERRORLNPGM(MSG_TOO_COLD_FOR_M600);
|
||||
return false;
|
||||
}
|
||||
#if ENABLED(ULTIPANEL)
|
||||
if (show_lcd) // Show initial message
|
||||
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_INIT);
|
||||
#endif
|
||||
|
||||
ensure_safe_temperature(); // wait for extruder to heat up before unloading
|
||||
if (!DEBUGGING(DRYRUN) && unload_length && thermalManager.targetTooColdToExtrude(active_extruder)) {
|
||||
SERIAL_ERROR_START();
|
||||
SERIAL_ERRORLNPGM(MSG_HOTEND_TOO_COLD);
|
||||
|
||||
#if ENABLED(ULTIPANEL)
|
||||
if (show_lcd) // Show status screen
|
||||
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_STATUS);
|
||||
#endif
|
||||
|
||||
return false; // unable to reach safe temperature
|
||||
}
|
||||
|
||||
// Indicate that the printer is paused
|
||||
@ -139,22 +273,18 @@ bool pause_print(const float &retract, const point_t &park_point, const float &u
|
||||
|
||||
// Pause the print job and timer
|
||||
#if ENABLED(SDSUPPORT)
|
||||
if (IS_SD_PRINTING) {
|
||||
if (card.sdprinting) {
|
||||
card.pauseSDPrint();
|
||||
++did_pause_print;
|
||||
}
|
||||
#endif
|
||||
print_job_timer.pause();
|
||||
|
||||
// Show initial message and wait for synchronize steppers
|
||||
if (show_lcd) {
|
||||
#if ENABLED(ULTIPANEL)
|
||||
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_INIT);
|
||||
#endif
|
||||
}
|
||||
|
||||
// Wait for synchronize steppers
|
||||
stepper.synchronize();
|
||||
COPY(resume_position, current_position); // Save current position for later
|
||||
|
||||
// Save current position
|
||||
COPY(resume_position, current_position);
|
||||
|
||||
// Initial retract before move to filament change position
|
||||
if (retract && !thermalManager.tooColdToExtrude(active_extruder))
|
||||
@ -163,48 +293,32 @@ bool pause_print(const float &retract, const point_t &park_point, const float &u
|
||||
// Park the nozzle by moving up by z_lift and then moving to (x_pos, y_pos)
|
||||
Nozzle::park(2, park_point);
|
||||
|
||||
if (unload_length != 0) {
|
||||
if (show_lcd) {
|
||||
#if ENABLED(ULTIPANEL)
|
||||
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_UNLOAD);
|
||||
idle();
|
||||
#endif
|
||||
}
|
||||
// Unload the filament
|
||||
if (unload_length)
|
||||
unload_filament(unload_length, show_lcd);
|
||||
|
||||
// Unload filament
|
||||
do_pause_e_move(unload_length, FILAMENT_CHANGE_UNLOAD_FEEDRATE);
|
||||
}
|
||||
return true;
|
||||
}
|
||||
|
||||
void wait_for_filament_reload(const int8_t max_beep_count/*=0*/) {
|
||||
bool nozzle_timed_out = false;
|
||||
|
||||
if (show_lcd) {
|
||||
#if ENABLED(ULTIPANEL)
|
||||
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_INSERT);
|
||||
#endif
|
||||
}
|
||||
SERIAL_ECHO_START();
|
||||
SERIAL_ERRORLNPGM(MSG_FILAMENT_CHANGE_INSERT);
|
||||
|
||||
#if HAS_BUZZER
|
||||
filament_change_beep(max_beep_count, true);
|
||||
#endif
|
||||
|
||||
idle();
|
||||
|
||||
// Disable extruders steppers for manual filament changing (only on boards that have separate ENABLE_PINS)
|
||||
#if E0_ENABLE_PIN != X_ENABLE_PIN && E1_ENABLE_PIN != Y_ENABLE_PIN
|
||||
disable_e_steppers();
|
||||
safe_delay(100);
|
||||
#endif
|
||||
|
||||
// Start the heater idle timers
|
||||
const millis_t nozzle_timeout = (millis_t)(PAUSE_PARK_NOZZLE_TIMEOUT) * 1000UL;
|
||||
|
||||
HOTEND_LOOP()
|
||||
thermalManager.start_heater_idle_timer(e, nozzle_timeout);
|
||||
|
||||
return true;
|
||||
}
|
||||
|
||||
void wait_for_filament_reload(const int8_t max_beep_count/*=0*/) {
|
||||
bool nozzle_timed_out = false;
|
||||
|
||||
// Wait for filament insert by user and press button
|
||||
KEEPALIVE_STATE(PAUSED_FOR_USER);
|
||||
wait_for_user = true; // LCD click or M108 will clear this
|
||||
@ -223,6 +337,14 @@ void wait_for_filament_reload(const int8_t max_beep_count/*=0*/) {
|
||||
#if ENABLED(ULTIPANEL)
|
||||
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_CLICK_TO_HEAT_NOZZLE);
|
||||
#endif
|
||||
SERIAL_ECHO_START();
|
||||
#if ENABLED(ULTIPANEL) && ENABLED(EMERGENCY_PARSER)
|
||||
SERIAL_ERRORLNPGM(MSG_FILAMENT_CHANGE_HEAT);
|
||||
#elif ENABLED(EMERGENCY_PARSER)
|
||||
SERIAL_ERRORLNPGM(MSG_FILAMENT_CHANGE_HEAT_M108);
|
||||
#else
|
||||
SERIAL_ERRORLNPGM(MSG_FILAMENT_CHANGE_HEAT_LCD);
|
||||
#endif
|
||||
|
||||
// Wait for LCD click or M108
|
||||
while (wait_for_user) idle(true);
|
||||
@ -236,6 +358,14 @@ void wait_for_filament_reload(const int8_t max_beep_count/*=0*/) {
|
||||
#if ENABLED(ULTIPANEL)
|
||||
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_INSERT);
|
||||
#endif
|
||||
SERIAL_ECHO_START();
|
||||
#if ENABLED(ULTIPANEL) && ENABLED(EMERGENCY_PARSER)
|
||||
SERIAL_ERRORLNPGM(MSG_FILAMENT_CHANGE_INSERT);
|
||||
#elif ENABLED(EMERGENCY_PARSER)
|
||||
SERIAL_ERRORLNPGM(MSG_FILAMENT_CHANGE_INSERT_M108);
|
||||
#else
|
||||
SERIAL_ERRORLNPGM(MSG_FILAMENT_CHANGE_INSERT_LCD);
|
||||
#endif
|
||||
|
||||
// Start the heater idle timers
|
||||
const millis_t nozzle_timeout = (millis_t)(PAUSE_PARK_NOZZLE_TIMEOUT) * 1000UL;
|
||||
@ -243,7 +373,7 @@ void wait_for_filament_reload(const int8_t max_beep_count/*=0*/) {
|
||||
HOTEND_LOOP()
|
||||
thermalManager.start_heater_idle_timer(e, nozzle_timeout);
|
||||
|
||||
wait_for_user = true; /* Wait for user to load filament */
|
||||
wait_for_user = true; // Wait for user to load filament
|
||||
nozzle_timed_out = false;
|
||||
|
||||
#if HAS_BUZZER
|
||||
@ -256,7 +386,7 @@ void wait_for_filament_reload(const int8_t max_beep_count/*=0*/) {
|
||||
KEEPALIVE_STATE(IN_HANDLER);
|
||||
}
|
||||
|
||||
void resume_print(const float &load_length/*=0*/, const float &initial_extrude_length/*=0*/, const int8_t max_beep_count/*=0*/) {
|
||||
void resume_print(const float &load_length/*=0*/, const float &extrude_length/*=ADVANCED_PAUSE_EXTRUDE_LENGTH*/, const int8_t max_beep_count/*=0*/) {
|
||||
bool nozzle_timed_out = false;
|
||||
|
||||
if (!did_pause_print) return;
|
||||
@ -267,66 +397,10 @@ void resume_print(const float &load_length/*=0*/, const float &initial_extrude_l
|
||||
thermalManager.reset_heater_idle_timer(e);
|
||||
}
|
||||
|
||||
if (nozzle_timed_out) ensure_safe_temperature();
|
||||
|
||||
#if HAS_BUZZER
|
||||
filament_change_beep(max_beep_count, true);
|
||||
#endif
|
||||
|
||||
if (load_length != 0) {
|
||||
#if ENABLED(ULTIPANEL)
|
||||
// Show "insert filament"
|
||||
if (nozzle_timed_out)
|
||||
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_INSERT);
|
||||
#endif
|
||||
|
||||
KEEPALIVE_STATE(PAUSED_FOR_USER);
|
||||
wait_for_user = true; // LCD click or M108 will clear this
|
||||
while (wait_for_user && nozzle_timed_out) {
|
||||
#if HAS_BUZZER
|
||||
filament_change_beep(max_beep_count);
|
||||
#endif
|
||||
idle(true);
|
||||
if (nozzle_timed_out || !thermalManager.tooColdToExtrude(active_extruder)) {
|
||||
// Load the new filament
|
||||
load_filament(load_length, extrude_length, max_beep_count, true, nozzle_timed_out);
|
||||
}
|
||||
KEEPALIVE_STATE(IN_HANDLER);
|
||||
|
||||
#if ENABLED(ULTIPANEL)
|
||||
// Show "load" message
|
||||
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_LOAD);
|
||||
#endif
|
||||
|
||||
// Load filament
|
||||
do_pause_e_move(load_length, FILAMENT_CHANGE_LOAD_FEEDRATE);
|
||||
}
|
||||
|
||||
#if ENABLED(ULTIPANEL) && ADVANCED_PAUSE_EXTRUDE_LENGTH > 0
|
||||
|
||||
if (!thermalManager.tooColdToExtrude(active_extruder)) {
|
||||
float extrude_length = initial_extrude_length;
|
||||
|
||||
do {
|
||||
if (extrude_length > 0) {
|
||||
// "Wait for filament extrude"
|
||||
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_EXTRUDE);
|
||||
|
||||
// Extrude filament to get into hotend
|
||||
do_pause_e_move(extrude_length, ADVANCED_PAUSE_EXTRUDE_FEEDRATE);
|
||||
}
|
||||
|
||||
// Show "Extrude More" / "Resume" menu and wait for reply
|
||||
KEEPALIVE_STATE(PAUSED_FOR_USER);
|
||||
wait_for_user = false;
|
||||
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_OPTION);
|
||||
while (advanced_pause_menu_response == ADVANCED_PAUSE_RESPONSE_WAIT_FOR) idle(true);
|
||||
KEEPALIVE_STATE(IN_HANDLER);
|
||||
|
||||
extrude_length = ADVANCED_PAUSE_EXTRUDE_LENGTH;
|
||||
|
||||
// Keep looping if "Extrude More" was selected
|
||||
} while (advanced_pause_menu_response == ADVANCED_PAUSE_RESPONSE_EXTRUDE_MORE);
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
#if ENABLED(ULTIPANEL)
|
||||
// "Wait for print to resume"
|
||||
@ -358,7 +432,7 @@ void resume_print(const float &load_length/*=0*/, const float &initial_extrude_l
|
||||
#endif
|
||||
|
||||
#if ENABLED(ULTIPANEL)
|
||||
// Show pause status screen
|
||||
// Show status screen
|
||||
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_STATUS);
|
||||
#endif
|
||||
|
||||
@ -376,4 +450,4 @@ void resume_print(const float &load_length/*=0*/, const float &initial_extrude_l
|
||||
#endif
|
||||
}
|
||||
|
||||
#endif // ADVANCED_PAUSE_FEATURE || PARK_HEAD_ON_PAUSE
|
||||
#endif // ADVANCED_PAUSE_FEATURE
|
||||
|
||||
@ -30,14 +30,49 @@
|
||||
|
||||
#include "../libs/nozzle.h"
|
||||
|
||||
#include "../inc/MarlinConfigPre.h"
|
||||
|
||||
enum AdvancedPauseMode {
|
||||
ADVANCED_PAUSE_MODE_PAUSE_PRINT,
|
||||
ADVANCED_PAUSE_MODE_LOAD_FILAMENT,
|
||||
ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT
|
||||
};
|
||||
|
||||
enum AdvancedPauseMessage {
|
||||
ADVANCED_PAUSE_MESSAGE_INIT,
|
||||
ADVANCED_PAUSE_MESSAGE_UNLOAD,
|
||||
ADVANCED_PAUSE_MESSAGE_INSERT,
|
||||
ADVANCED_PAUSE_MESSAGE_LOAD,
|
||||
ADVANCED_PAUSE_MESSAGE_PURGE,
|
||||
ADVANCED_PAUSE_MESSAGE_OPTION,
|
||||
ADVANCED_PAUSE_MESSAGE_RESUME,
|
||||
ADVANCED_PAUSE_MESSAGE_STATUS,
|
||||
ADVANCED_PAUSE_MESSAGE_CLICK_TO_HEAT_NOZZLE,
|
||||
ADVANCED_PAUSE_MESSAGE_WAIT_FOR_NOZZLES_TO_HEAT
|
||||
};
|
||||
|
||||
enum AdvancedPauseMenuResponse {
|
||||
ADVANCED_PAUSE_RESPONSE_WAIT_FOR,
|
||||
ADVANCED_PAUSE_RESPONSE_EXTRUDE_MORE,
|
||||
ADVANCED_PAUSE_RESPONSE_RESUME_PRINT
|
||||
};
|
||||
|
||||
extern AdvancedPauseMenuResponse advanced_pause_menu_response;
|
||||
|
||||
extern float filament_change_unload_length[EXTRUDERS],
|
||||
filament_change_load_length[EXTRUDERS];
|
||||
|
||||
extern uint8_t did_pause_print;
|
||||
|
||||
bool pause_print(const float &retract, const point_t &park_point, const float &unload_length=0,
|
||||
const int8_t max_beep_count=0, const bool show_lcd=false
|
||||
);
|
||||
bool pause_print(const float &retract, const point_t &park_point, const float &unload_length=0, const bool show_lcd=false);
|
||||
|
||||
void wait_for_filament_reload(const int8_t max_beep_count=0);
|
||||
|
||||
void resume_print(const float &load_length=0, const float &initial_extrude_length=0, const int8_t max_beep_count=0);
|
||||
void resume_print(const float &load_length=0, const float &extrude_length=ADVANCED_PAUSE_EXTRUDE_LENGTH, const int8_t max_beep_count=0);
|
||||
|
||||
bool load_filament(const float &load_length=0, const float &extrude_length=0, const int8_t max_beep_count=0, const bool show_lcd=false,
|
||||
const bool pause_for_user=false, const AdvancedPauseMode mode=ADVANCED_PAUSE_MODE_PAUSE_PRINT);
|
||||
|
||||
bool unload_filament(const float &unload_length, const bool show_lcd=false, const AdvancedPauseMode mode=ADVANCED_PAUSE_MODE_PAUSE_PRINT);
|
||||
|
||||
#endif // _PAUSE_H_
|
||||
|
||||
@ -54,7 +54,7 @@ void GcodeSuite::M18_M84() {
|
||||
if (parser.seen('X')) disable_X();
|
||||
if (parser.seen('Y')) disable_Y();
|
||||
if (parser.seen('Z')) disable_Z();
|
||||
#if E0_ENABLE_PIN != X_ENABLE_PIN && E1_ENABLE_PIN != Y_ENABLE_PIN // Only enable on boards that have separate ENABLE_PINS
|
||||
#if E0_ENABLE_PIN != X_ENABLE_PIN && E1_ENABLE_PIN != Y_ENABLE_PIN // Only disable on boards that have separate ENABLE_PINS
|
||||
if (parser.seen('E')) disable_e_steppers();
|
||||
#endif
|
||||
}
|
||||
|
||||
@ -33,24 +33,34 @@
|
||||
#include "../../../module/tool_change.h"
|
||||
#endif
|
||||
|
||||
#if ENABLED(ULTIPANEL)
|
||||
#include "../../../lcd/ultralcd.h"
|
||||
#endif
|
||||
|
||||
/**
|
||||
* M600: Pause for filament change
|
||||
*
|
||||
* E[distance] - Retract the filament this far (negative value)
|
||||
* E[distance] - Retract the filament this far
|
||||
* Z[distance] - Move the Z axis by this distance
|
||||
* X[position] - Move to this X position, with Y
|
||||
* Y[position] - Move to this Y position, with X
|
||||
* U[distance] - Retract distance for removal (negative value) (manual reload)
|
||||
* L[distance] - Extrude distance for insertion (positive value) (manual reload)
|
||||
* U[distance] - Retract distance for removal (manual reload)
|
||||
* L[distance] - Extrude distance for insertion (manual reload)
|
||||
* B[count] - Number of times to beep, -1 for indefinite (if equipped with a buzzer)
|
||||
* T[toolhead] - Select extruder for filament change
|
||||
*
|
||||
* Default values are used for omitted arguments.
|
||||
*
|
||||
*/
|
||||
void GcodeSuite::M600() {
|
||||
point_t park_point = NOZZLE_PARK_POINT;
|
||||
|
||||
if (get_target_extruder_from_command()) return;
|
||||
|
||||
// Show initial message
|
||||
#if ENABLED(ULTIPANEL)
|
||||
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_INIT, ADVANCED_PAUSE_MODE_PAUSE_PRINT, target_extruder);
|
||||
#endif
|
||||
|
||||
#if ENABLED(HOME_BEFORE_FILAMENT_CHANGE)
|
||||
// Don't allow filament change without homing first
|
||||
if (axis_unhomed_error()) home_all_axes();
|
||||
@ -58,22 +68,17 @@ void GcodeSuite::M600() {
|
||||
|
||||
#if EXTRUDERS > 1
|
||||
// Change toolhead if specified
|
||||
uint8_t active_extruder_before_filament_change = -1;
|
||||
if (parser.seen('T')) {
|
||||
const uint8_t extruder = parser.value_byte();
|
||||
if (active_extruder != extruder) {
|
||||
active_extruder_before_filament_change = active_extruder;
|
||||
tool_change(extruder, 0, true);
|
||||
}
|
||||
}
|
||||
uint8_t active_extruder_before_filament_change = active_extruder;
|
||||
if (active_extruder != target_extruder)
|
||||
tool_change(target_extruder, 0, true);
|
||||
#endif
|
||||
|
||||
// Initial retract before move to filament change position
|
||||
const float retract = parser.seen('E') ? parser.value_axis_units(E_AXIS) : 0
|
||||
const float retract = -FABS(parser.seen('E') ? parser.value_axis_units(E_AXIS) : 0
|
||||
#ifdef PAUSE_PARK_RETRACT_LENGTH
|
||||
- (PAUSE_PARK_RETRACT_LENGTH)
|
||||
+ (PAUSE_PARK_RETRACT_LENGTH)
|
||||
#endif
|
||||
;
|
||||
);
|
||||
|
||||
// Move XY axes to filament change position or given position
|
||||
if (parser.seenval('X')) park_point.x = parser.linearval('X');
|
||||
@ -88,22 +93,16 @@ void GcodeSuite::M600() {
|
||||
#endif
|
||||
|
||||
// Unload filament
|
||||
const float unload_length = parser.seen('U') ? parser.value_axis_units(E_AXIS) : 0
|
||||
#if defined(FILAMENT_CHANGE_UNLOAD_LENGTH) && FILAMENT_CHANGE_UNLOAD_LENGTH > 0
|
||||
- (FILAMENT_CHANGE_UNLOAD_LENGTH)
|
||||
#endif
|
||||
;
|
||||
const float unload_length = -FABS(parser.seen('U') ? parser.value_axis_units(E_AXIS)
|
||||
: filament_change_unload_length[active_extruder]);
|
||||
|
||||
// Load filament
|
||||
const float load_length = parser.seen('L') ? parser.value_axis_units(E_AXIS) : 0
|
||||
#ifdef FILAMENT_CHANGE_LOAD_LENGTH
|
||||
+ FILAMENT_CHANGE_LOAD_LENGTH
|
||||
#endif
|
||||
;
|
||||
const float load_length = FABS(parser.seen('L') ? parser.value_axis_units(E_AXIS)
|
||||
: filament_change_load_length[active_extruder]);
|
||||
|
||||
const int beep_count = parser.intval('B',
|
||||
#ifdef FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS
|
||||
FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS
|
||||
#ifdef FILAMENT_CHANGE_ALERT_BEEPS
|
||||
FILAMENT_CHANGE_ALERT_BEEPS
|
||||
#else
|
||||
-1
|
||||
#endif
|
||||
@ -111,14 +110,14 @@ void GcodeSuite::M600() {
|
||||
|
||||
const bool job_running = print_job_timer.isRunning();
|
||||
|
||||
if (pause_print(retract, park_point, unload_length, beep_count, true)) {
|
||||
if (pause_print(retract, park_point, unload_length, true)) {
|
||||
wait_for_filament_reload(beep_count);
|
||||
resume_print(load_length, ADVANCED_PAUSE_EXTRUDE_LENGTH, beep_count);
|
||||
}
|
||||
|
||||
#if EXTRUDERS > 1
|
||||
// Restore toolhead if it was changed
|
||||
if (active_extruder_before_filament_change >= 0)
|
||||
if (active_extruder_before_filament_change != active_extruder)
|
||||
tool_change(active_extruder_before_filament_change, 0, true);
|
||||
#endif
|
||||
|
||||
|
||||
65
Marlin/src/gcode/feature/pause/M603.cpp
Normal file
65
Marlin/src/gcode/feature/pause/M603.cpp
Normal file
@ -0,0 +1,65 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
#include "../../../inc/MarlinConfig.h"
|
||||
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
|
||||
#include "../../gcode.h"
|
||||
#include "../../../feature/pause.h"
|
||||
#include "../../../module/motion.h"
|
||||
#include "../../../module/printcounter.h"
|
||||
|
||||
#if EXTRUDERS > 1
|
||||
#include "../../../module/tool_change.h"
|
||||
#endif
|
||||
|
||||
/**
|
||||
* M603: Configure filament change
|
||||
*
|
||||
* T[toolhead] - Select extruder to configure, active extruder if not specified
|
||||
* U[distance] - Retract distance for removal, for the specified extruder
|
||||
* L[distance] - Extrude distance for insertion, for the specified extruder
|
||||
*
|
||||
*/
|
||||
inline void GcodeSuite::M603() {
|
||||
|
||||
if (get_target_extruder_from_command()) return;
|
||||
|
||||
// Unload length
|
||||
if (parser.seen('U')) {
|
||||
filament_change_unload_length[target_extruder] = FABS(parser.value_axis_units(E_AXIS));
|
||||
#if ENABLED(PREVENT_LENGTHY_EXTRUDE)
|
||||
NOMORE(filament_change_unload_length[target_extruder], EXTRUDE_MAXLENGTH);
|
||||
#endif
|
||||
}
|
||||
|
||||
// Load length
|
||||
if (parser.seen('L')) {
|
||||
filament_change_load_length[target_extruder] = FABS(parser.value_axis_units(E_AXIS));
|
||||
#if ENABLED(PREVENT_LENGTHY_EXTRUDE)
|
||||
NOMORE(filament_change_load_length[target_extruder], EXTRUDE_MAXLENGTH);
|
||||
#endif
|
||||
}
|
||||
}
|
||||
|
||||
#endif // ADVANCED_PAUSE_FEATURE
|
||||
165
Marlin/src/gcode/feature/pause/M701_M702.cpp
Normal file
165
Marlin/src/gcode/feature/pause/M701_M702.cpp
Normal file
@ -0,0 +1,165 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
#include "../../../inc/MarlinConfigPre.h"
|
||||
|
||||
#if ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
|
||||
|
||||
#include "../../gcode.h"
|
||||
#include "../../../Marlin.h"
|
||||
#include "../../../module/motion.h"
|
||||
#include "../../../module/temperature.h"
|
||||
#include "../../../libs/point_t.h"
|
||||
|
||||
#if EXTRUDERS > 1
|
||||
#include "../../../module/tool_change.h"
|
||||
#endif
|
||||
|
||||
#if ENABLED(ULTIPANEL)
|
||||
#include "../../../lcd/ultralcd.h"
|
||||
#endif
|
||||
|
||||
/**
|
||||
* M701: Load filament
|
||||
*
|
||||
* T[extruder] - Optional extruder number. Current extruder if omitted.
|
||||
* Z[distance] - Move the Z axis by this distance
|
||||
* L[distance] - Extrude distance for insertion (positive value) (manual reload)
|
||||
*
|
||||
* Default values are used for omitted arguments.
|
||||
*/
|
||||
void GcodeSuite::M701() {
|
||||
point_t park_point = NOZZLE_PARK_POINT;
|
||||
|
||||
if (get_target_extruder_from_command()) return;
|
||||
|
||||
// Z axis lift
|
||||
if (parser.seenval('Z')) park_point.z = parser.linearval('Z');
|
||||
|
||||
// Load filament
|
||||
const float load_length = FABS(parser.seen('L') ? parser.value_axis_units(E_AXIS) :
|
||||
filament_change_load_length[target_extruder]);
|
||||
|
||||
// Show initial message
|
||||
#if ENABLED(ULTIPANEL)
|
||||
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_LOAD, ADVANCED_PAUSE_MODE_LOAD_FILAMENT, target_extruder);
|
||||
#endif
|
||||
|
||||
#if EXTRUDERS > 1
|
||||
// Change toolhead if specified
|
||||
uint8_t active_extruder_before_filament_change = active_extruder;
|
||||
if (active_extruder != target_extruder)
|
||||
tool_change(target_extruder, 0, true);
|
||||
#endif
|
||||
|
||||
// Lift Z axis
|
||||
if (park_point.z > 0)
|
||||
do_blocking_move_to_z(min(current_position[Z_AXIS] + park_point.z, Z_MAX_POS), NOZZLE_PARK_Z_FEEDRATE);
|
||||
|
||||
load_filament(load_length, ADVANCED_PAUSE_EXTRUDE_LENGTH, FILAMENT_CHANGE_ALERT_BEEPS, true,
|
||||
thermalManager.wait_for_heating(target_extruder), ADVANCED_PAUSE_MODE_LOAD_FILAMENT);
|
||||
|
||||
// Restore Z axis
|
||||
if (park_point.z > 0)
|
||||
do_blocking_move_to_z(max(current_position[Z_AXIS] - park_point.z, Z_MIN_POS), NOZZLE_PARK_Z_FEEDRATE);
|
||||
|
||||
#if EXTRUDERS > 1
|
||||
// Restore toolhead if it was changed
|
||||
if (active_extruder_before_filament_change != active_extruder)
|
||||
tool_change(active_extruder_before_filament_change, 0, true);
|
||||
#endif
|
||||
|
||||
// Show status screen
|
||||
#if ENABLED(ULTIPANEL)
|
||||
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_STATUS);
|
||||
#endif
|
||||
}
|
||||
|
||||
/**
|
||||
* M702: Unload filament
|
||||
*
|
||||
* T[extruder] - Optional extruder number. If omitted, current extruder
|
||||
* (or ALL extruders with FILAMENT_UNLOAD_ALL_EXTRUDERS).
|
||||
* Z[distance] - Move the Z axis by this distance
|
||||
* U[distance] - Retract distance for removal (manual reload)
|
||||
*
|
||||
* Default values are used for omitted arguments.
|
||||
*/
|
||||
void GcodeSuite::M702() {
|
||||
point_t park_point = NOZZLE_PARK_POINT;
|
||||
|
||||
if (get_target_extruder_from_command()) return;
|
||||
|
||||
// Z axis lift
|
||||
if (parser.seenval('Z')) park_point.z = parser.linearval('Z');
|
||||
|
||||
// Show initial message
|
||||
#if ENABLED(ULTIPANEL)
|
||||
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_UNLOAD, ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT, target_extruder);
|
||||
#endif
|
||||
|
||||
#if EXTRUDERS > 1
|
||||
// Change toolhead if specified
|
||||
uint8_t active_extruder_before_filament_change = active_extruder;
|
||||
if (active_extruder != target_extruder)
|
||||
tool_change(target_extruder, 0, true);
|
||||
#endif
|
||||
|
||||
// Lift Z axis
|
||||
if (park_point.z > 0)
|
||||
do_blocking_move_to_z(min(current_position[Z_AXIS] + park_point.z, Z_MAX_POS), NOZZLE_PARK_Z_FEEDRATE);
|
||||
|
||||
// Unload filament
|
||||
#if EXTRUDERS > 1 && ENABLED(FILAMENT_UNLOAD_ALL_EXTRUDERS)
|
||||
if (!parser.seenval('T')) {
|
||||
HOTEND_LOOP() {
|
||||
if (e != active_extruder) tool_change(e, 0, true);
|
||||
unload_filament(-filament_change_unload_length[e], true, ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT);
|
||||
}
|
||||
}
|
||||
else
|
||||
#endif
|
||||
{
|
||||
// Unload length
|
||||
const float unload_length = -FABS(parser.seen('U') ? parser.value_axis_units(E_AXIS) :
|
||||
filament_change_unload_length[target_extruder]);
|
||||
|
||||
unload_filament(unload_length, true, ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT);
|
||||
}
|
||||
|
||||
// Restore Z axis
|
||||
if (park_point.z > 0)
|
||||
do_blocking_move_to_z(max(current_position[Z_AXIS] - park_point.z, Z_MIN_POS), NOZZLE_PARK_Z_FEEDRATE);
|
||||
|
||||
#if EXTRUDERS > 1
|
||||
// Restore toolhead if it was changed
|
||||
if (active_extruder_before_filament_change != active_extruder)
|
||||
tool_change(active_extruder_before_filament_change, 0, true);
|
||||
#endif
|
||||
|
||||
// Show status screen
|
||||
#if ENABLED(ULTIPANEL)
|
||||
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_STATUS);
|
||||
#endif
|
||||
}
|
||||
|
||||
#endif // ADVANCED_PAUSE_FEATURE
|
||||
@ -1,52 +0,0 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
#include "../../../inc/MarlinConfig.h"
|
||||
|
||||
#if ENABLED(MK2_MULTIPLEXER)
|
||||
|
||||
#include "../../gcode.h"
|
||||
#include "../../../module/motion.h"
|
||||
#include "../../../feature/snmm.h"
|
||||
#include "../../../Marlin.h"
|
||||
|
||||
/**
|
||||
* M702: Unload all extruders
|
||||
*/
|
||||
void GcodeSuite::M702() {
|
||||
for (uint8_t s = 0; s < E_STEPPERS; s++) {
|
||||
select_multiplexed_stepper(s);
|
||||
// TODO: standard unload filament function
|
||||
// MK2 firmware behavior:
|
||||
// - Make sure temperature is high enough
|
||||
// - Raise Z to at least 15 to make room
|
||||
// - Extrude 1cm of filament in 1 second
|
||||
// - Under 230C quickly purge ~12mm, over 230C purge ~10mm
|
||||
// - Change E max feedrate to 80, eject the filament from the tube. Sync.
|
||||
// - Restore E max feedrate to 50
|
||||
}
|
||||
// Go back to the last active extruder
|
||||
select_multiplexed_stepper(active_extruder);
|
||||
disable_e_steppers();
|
||||
}
|
||||
|
||||
#endif // MK2_MULTIPLEXER
|
||||
@ -399,8 +399,7 @@ void GcodeSuite::process_parsed_command() {
|
||||
#endif
|
||||
|
||||
#if ENABLED(PARK_HEAD_ON_PAUSE)
|
||||
case 125: // M125: Store current position and move to filament change position
|
||||
M125(); break;
|
||||
case 125: M125(); break; // M125: Store current position and move to filament change position
|
||||
#endif
|
||||
|
||||
#if ENABLED(BARICUDA)
|
||||
|
||||
@ -198,9 +198,12 @@
|
||||
* M503 - Print the current settings (in memory): "M503 S<verbose>". S0 specifies compact output.
|
||||
* M540 - Enable/disable SD card abort on endstop hit: "M540 S<state>". (Requires ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
|
||||
* M600 - Pause for filament change: "M600 X<pos> Y<pos> Z<raise> E<first_retract> L<later_retract>". (Requires ADVANCED_PAUSE_FEATURE)
|
||||
* M603 - Configure filament change: "M603 T<tool> U<unload_length> L<load_length>". (Requires ADVANCED_PAUSE_FEATURE)
|
||||
* M605 - Set Dual X-Carriage movement mode: "M605 S<mode> [X<x_offset>] [R<temp_offset>]". (Requires DUAL_X_CARRIAGE)
|
||||
* M665 - Set delta configurations: "M665 L<diagonal rod> R<delta radius> S<segments/s> A<rod A trim mm> B<rod B trim mm> C<rod C trim mm> I<tower A trim angle> J<tower B trim angle> K<tower C trim angle>" (Requires DELTA)
|
||||
* M666 - Set delta endstop adjustment. (Requires DELTA)
|
||||
* M605 - Set dual x-carriage movement mode: "M605 S<mode> [X<x_offset>] [R<temp_offset>]". (Requires DUAL_X_CARRIAGE)
|
||||
* M701 - Load filament (requires FILAMENT_LOAD_UNLOAD_GCODES)
|
||||
* M702 - Unload filament (requires FILAMENT_LOAD_UNLOAD_GCODES)
|
||||
* M851 - Set Z probe's Z offset in current units. (Negative = below the nozzle.)
|
||||
* M852 - Set skew factors: "M852 [I<xy>] [J<xz>] [K<yz>]". (Requires SKEW_CORRECTION_GCODE, and SKEW_CORRECTION_FOR_Z for IJ)
|
||||
* M860 - Report the position of position encoder modules.
|
||||
@ -685,6 +688,7 @@ private:
|
||||
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
static void M600();
|
||||
static void M603();
|
||||
#endif
|
||||
|
||||
#if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
|
||||
@ -699,7 +703,8 @@ private:
|
||||
static void M666();
|
||||
#endif
|
||||
|
||||
#if ENABLED(MK2_MULTIPLEXER)
|
||||
#if ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
|
||||
static void M701();
|
||||
static void M702();
|
||||
#endif
|
||||
|
||||
|
||||
@ -131,6 +131,8 @@
|
||||
#error "FILAMENT_CHANGE_EXTRUDE_LENGTH is now ADVANCED_PAUSE_EXTRUDE_LENGTH. Please update your configuration."
|
||||
#elif defined(FILAMENT_CHANGE_NOZZLE_TIMEOUT)
|
||||
#error "FILAMENT_CHANGE_NOZZLE_TIMEOUT is now PAUSE_PARK_NOZZLE_TIMEOUT. Please update your configuration."
|
||||
#elif defined(FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS)
|
||||
#error "FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS is now FILAMENT_CHANGE_ALERT_BEEPS. Please update your configuration."
|
||||
#elif ENABLED(FILAMENT_CHANGE_NO_STEPPER_TIMEOUT)
|
||||
#error "FILAMENT_CHANGE_NO_STEPPER_TIMEOUT is now PAUSE_PARK_NO_STEPPER_TIMEOUT. Please update your configuration."
|
||||
#elif defined(PLA_PREHEAT_HOTEND_TEMP)
|
||||
@ -406,16 +408,20 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
|
||||
* Advanced Pause
|
||||
*/
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#if DISABLED(NEWPANEL)
|
||||
#error "ADVANCED_PAUSE_FEATURE currently requires an LCD controller."
|
||||
#if !HAS_RESUME_CONTINUE
|
||||
#error "ADVANCED_PAUSE_FEATURE currently requires an LCD controller or EMERGENCY_PARSER."
|
||||
#elif ENABLED(EXTRUDER_RUNOUT_PREVENT)
|
||||
#error "EXTRUDER_RUNOUT_PREVENT is incompatible with ADVANCED_PAUSE_FEATURE."
|
||||
#elif ENABLED(PARK_HEAD_ON_PAUSE) && DISABLED(SDSUPPORT) && DISABLED(NEWPANEL) && DISABLED(EMERGENCY_PARSER)
|
||||
#error "PARK_HEAD_ON_PAUSE requires SDSUPPORT, EMERGENCY_PARSER, or an LCD controller."
|
||||
#elif ENABLED(HOME_BEFORE_FILAMENT_CHANGE) && DISABLED(PAUSE_PARK_NO_STEPPER_TIMEOUT)
|
||||
#error "HOME_BEFORE_FILAMENT_CHANGE requires PAUSE_PARK_NO_STEPPER_TIMEOUT"
|
||||
#error "HOME_BEFORE_FILAMENT_CHANGE requires PAUSE_PARK_NO_STEPPER_TIMEOUT."
|
||||
#elif DISABLED(NOZZLE_PARK_FEATURE)
|
||||
#error "ADVANCED_PAUSE_FEATURE requires NOZZLE_PARK_FEATURE"
|
||||
#error "ADVANCED_PAUSE_FEATURE requires NOZZLE_PARK_FEATURE."
|
||||
#elif ENABLED(PREVENT_LENGTHY_EXTRUDE) && FILAMENT_CHANGE_UNLOAD_LENGTH > EXTRUDE_MAXLENGTH
|
||||
#error "FILAMENT_CHANGE_UNLOAD_LENGTH must be less than or equal to EXTRUDE_MAXLENGTH."
|
||||
#elif ENABLED(PREVENT_LENGTHY_EXTRUDE) && FILAMENT_CHANGE_LOAD_LENGTH > EXTRUDE_MAXLENGTH
|
||||
#error "FILAMENT_CHANGE_LOAD_LENGTH must be less than or equal to EXTRUDE_MAXLENGTH."
|
||||
#endif
|
||||
#endif
|
||||
|
||||
@ -454,8 +460,6 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
|
||||
*/
|
||||
#ifdef SNMM
|
||||
#error "SNMM is now MK2_MULTIPLEXER. Please update your configuration."
|
||||
#elif ENABLED(MK2_MULTIPLEXER) && DISABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#error "ADVANCED_PAUSE_FEATURE is required with MK2_MULTIPLEXER."
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
||||
@ -217,9 +217,6 @@
|
||||
#define MSG_DRIVE_STRENGTH _UxGT("Fuerza d'o driver")
|
||||
#define MSG_DAC_PERCENT _UxGT("Driver %")
|
||||
#define MSG_DAC_EEPROM_WRITE _UxGT("Escri. DAC EEPROM")
|
||||
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extruir mas")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Resumir imp.")
|
||||
|
||||
//
|
||||
@ -246,8 +243,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("expulsar filament")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Aguardando a")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("cargar filamento")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Aguardando a")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("extruir filamento")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Aguardando impre.")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("pa continar")
|
||||
|
||||
|
||||
@ -219,11 +219,7 @@
|
||||
#define MSG_DRIVE_STRENGTH _UxGT("Força motor")
|
||||
#define MSG_DAC_PERCENT _UxGT("Driver %")
|
||||
#define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM Write")
|
||||
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extrudeix mes")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Repren impressió")
|
||||
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Temp minima es ")
|
||||
|
||||
//
|
||||
// Filament Change screens show up to 3 lines on a 4-line display
|
||||
@ -244,8 +240,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Espereu...")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Esperant carrega")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("de filament")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Esperant per")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("extreure filament")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Esperant per")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("reprendre")
|
||||
#else // LCD_HEIGHT < 4
|
||||
@ -254,7 +248,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insereix i prem")
|
||||
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Escalfant...")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Carregant...")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extrudint...")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Reprenent...")
|
||||
#endif // LCD_HEIGHT < 4
|
||||
|
||||
|
||||
@ -336,11 +336,7 @@
|
||||
#define MSG_DRIVE_STRENGTH _UxGT("Buzeni motoru")
|
||||
#define MSG_DAC_PERCENT _UxGT("Motor %")
|
||||
#define MSG_DAC_EEPROM_WRITE _UxGT("Ulozit do EEPROM")
|
||||
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Jeste vytlacit")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Obnovit tisk")
|
||||
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Min. teplota je ")
|
||||
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Tryska: ")
|
||||
#define MSG_ERR_HOMING_FAILED _UxGT("Parkovani selhalo")
|
||||
#define MSG_ERR_PROBING_FAILED _UxGT("Kalibrace selhala")
|
||||
@ -363,9 +359,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Cekejte prosim")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("na zavedeni")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("filamentu")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Cekejte prosim")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("na vytlaceni")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 _UxGT("filamentu")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Cekejte prosim")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("na pokracovani")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("tisku")
|
||||
@ -376,7 +369,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Vlozte, kliknete")
|
||||
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Nahrivani...")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Zavadeni...")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Vytlacovani...")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Pokracovani...")
|
||||
#endif // LCD_HEIGHT < 4
|
||||
|
||||
|
||||
@ -338,11 +338,7 @@
|
||||
#define MSG_DRIVE_STRENGTH _UxGT("Buzení motorů")
|
||||
#define MSG_DAC_PERCENT _UxGT("Motor %")
|
||||
#define MSG_DAC_EEPROM_WRITE _UxGT("Uložit do EEPROM")
|
||||
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Ještě vytlačit")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Obnovit tisk")
|
||||
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Min. teplota je ")
|
||||
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Tryska: ")
|
||||
#define MSG_ERR_HOMING_FAILED _UxGT("Parkování selhalo")
|
||||
#define MSG_ERR_PROBING_FAILED _UxGT("Kalibrace selhala")
|
||||
@ -365,9 +361,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Čekejte prosím")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("na zavedení")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("filamentu")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Čekejte prosím")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("na vytlačení")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 _UxGT("filamentu")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Čekejte prosím")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("na pokračování")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("tisku")
|
||||
@ -378,7 +371,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Vložte, klikněte")
|
||||
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Nahřívání...")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Zavádění...")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Vytlačování...")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Pokračování...")
|
||||
#endif // LCD_HEIGHT < 4
|
||||
|
||||
|
||||
@ -217,9 +217,6 @@
|
||||
#define MSG_DAC_PERCENT _UxGT("Driv %")
|
||||
#define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM Skriv")
|
||||
|
||||
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extruder mere")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Forsæt print")
|
||||
|
||||
#if LCD_HEIGHT >= 4
|
||||
@ -233,8 +230,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("for at fortsætte...")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Vent på")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament indtag")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Vent på")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("filament extrudering")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Vent på at print")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("fortsætter")
|
||||
#else // LCD_HEIGHT < 4
|
||||
@ -242,7 +237,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Udskyder...")
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Indsæt og klik")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Indtager...")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extrudere...")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Fortsætter...")
|
||||
#endif // LCD_HEIGHT < 4
|
||||
|
||||
|
||||
@ -308,11 +308,9 @@
|
||||
#define MSG_DAC_PERCENT _UxGT("Treiber %")
|
||||
#define MSG_DAC_EEPROM_WRITE _UxGT("Werte speichern")
|
||||
|
||||
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("DRUCK PAUSIERT")
|
||||
#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("DRUCK PAUSIERT")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("FORTS. OPTIONEN:")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extrude mehr")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Drucke weiter")
|
||||
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Min. Temperatur ist ")
|
||||
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Düse: ")
|
||||
|
||||
#if LCD_HEIGHT >= 4
|
||||
@ -333,9 +331,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Warte auf")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("Laden des")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("Filaments")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Warte auf")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("Extrusion des")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 _UxGT("Filaments")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Warte auf")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("Fortsetzung des")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("Druckes...")
|
||||
@ -346,7 +341,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Laden und Klick")
|
||||
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Heizen...")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Laden...")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extrudieren...")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Fortsetzen...")
|
||||
#endif // LCD_HEIGHT < 4
|
||||
|
||||
|
||||
@ -168,7 +168,6 @@
|
||||
#define MSG_ERR_MAXTEMP_BED _UxGT("ΜΕΓΙΣΤΗ ΘΕΡΜΟΚΡΑΣΙΑΣ ΕΠ. ΕΚΤΥΠΩΣΗΣ") //SHORTEN
|
||||
#define MSG_ERR_MINTEMP_BED _UxGT("ΕΛΑΧΙΣΤΗ ΘΕΡΜΟΚΡΑΣΙΑΣ ΕΠ. ΕΚΤΥΠΩΣΗΣ") //SHORTEN
|
||||
#define MSG_HALTED _UxGT("H εκτύπωση διακόπηκε")
|
||||
#define MSG_PLEASE_RESET _UxGT("PLEASE RESET") //TRANSLATE
|
||||
#define MSG_HEATING _UxGT("Θερμαίνεται…")
|
||||
#define MSG_HEATING_COMPLETE _UxGT("Η θέρμανση ολοκληρώθηκε.") //SHORTEN
|
||||
#define MSG_BED_HEATING _UxGT("Θέρμανση ΕΠ. Εκτύπωσης") //SHORTEN
|
||||
@ -179,56 +178,4 @@
|
||||
#define MSG_DELTA_CALIBRATE_Z _UxGT("Βαθμονόμηση Z")
|
||||
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Βαθμονόμηση κέντρου")
|
||||
|
||||
#define MSG_INFO_MENU _UxGT("About Printer")
|
||||
#define MSG_INFO_PRINTER_MENU _UxGT("Printer Info")
|
||||
#define MSG_INFO_STATS_MENU _UxGT("Printer Stats")
|
||||
#define MSG_INFO_BOARD_MENU _UxGT("Board Info")
|
||||
#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistors")
|
||||
#define MSG_INFO_EXTRUDERS _UxGT("Extruders")
|
||||
#define MSG_INFO_BAUDRATE _UxGT("Baud")
|
||||
#define MSG_INFO_PROTOCOL _UxGT("Protocol")
|
||||
|
||||
#if LCD_WIDTH >= 20
|
||||
#define MSG_INFO_PRINT_COUNT _UxGT("Print Count")
|
||||
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Completed ")
|
||||
#define MSG_INFO_PRINT_TIME _UxGT("Total Time ")
|
||||
#else
|
||||
#define MSG_INFO_PRINT_COUNT _UxGT("Prints ")
|
||||
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Completed")
|
||||
#define MSG_INFO_PRINT_TIME _UxGT("Duration ")
|
||||
#endif
|
||||
#define MSG_INFO_MIN_TEMP _UxGT("Min Temp")
|
||||
#define MSG_INFO_MAX_TEMP _UxGT("Max Temp")
|
||||
#define MSG_INFO_PSU _UxGT("PSU")
|
||||
|
||||
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("CHANGE FILAMENT")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extrude more")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Resume print")
|
||||
|
||||
#if LCD_HEIGHT >= 4
|
||||
// Up to 3 lines allowed
|
||||
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Wait for start")
|
||||
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("of the filament")
|
||||
#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("change")
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wait for")
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("filament unload")
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insert filament")
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("and press button")
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("to continue...")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Wait for")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament load")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Wait for")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("filament extrude")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wait for print")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("to resume")
|
||||
#else // LCD_HEIGHT < 4
|
||||
// Up to 2 lines allowed
|
||||
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Please wait...")
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Ejecting...")
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insert and Click")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Loading...")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extruding...")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Resuming...")
|
||||
#endif
|
||||
|
||||
#endif // LANGUAGE_EL_H
|
||||
|
||||
@ -590,6 +590,12 @@
|
||||
#ifndef MSG_FILAMENT_DIAM
|
||||
#define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.")
|
||||
#endif
|
||||
#ifndef MSG_FILAMENT_UNLOAD
|
||||
#define MSG_FILAMENT_UNLOAD _UxGT("Unload mm")
|
||||
#endif
|
||||
#ifndef MSG_FILAMENT_LOAD
|
||||
#define MSG_FILAMENT_LOAD _UxGT("Load mm")
|
||||
#endif
|
||||
#ifndef MSG_ADVANCE_K
|
||||
#define MSG_ADVANCE_K _UxGT("Advance K")
|
||||
#endif
|
||||
@ -689,6 +695,15 @@
|
||||
#ifndef MSG_FILAMENTCHANGE
|
||||
#define MSG_FILAMENTCHANGE _UxGT("Change filament")
|
||||
#endif
|
||||
#ifndef MSG_FILAMENTLOAD
|
||||
#define MSG_FILAMENTLOAD _UxGT("Load filament")
|
||||
#endif
|
||||
#ifndef MSG_FILAMENTUNLOAD
|
||||
#define MSG_FILAMENTUNLOAD _UxGT("Unload filament")
|
||||
#endif
|
||||
#ifndef MSG_FILAMENTUNLOAD_ALL
|
||||
#define MSG_FILAMENTUNLOAD_ALL _UxGT("Unload All")
|
||||
#endif
|
||||
#ifndef MSG_INIT_SDCARD
|
||||
#define MSG_INIT_SDCARD _UxGT("Init. SD card")
|
||||
#endif
|
||||
@ -918,19 +933,22 @@
|
||||
#define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM Write")
|
||||
#endif
|
||||
#ifndef MSG_FILAMENT_CHANGE_HEADER
|
||||
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED")
|
||||
#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("PRINT PAUSED")
|
||||
#endif
|
||||
#ifndef MSG_FILAMENT_CHANGE_HEADER_LOAD
|
||||
#define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("LOAD FILAMENT")
|
||||
#endif
|
||||
#ifndef MSG_FILAMENT_CHANGE_HEADER_UNLOAD
|
||||
#define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("UNLOAD FILAMENT")
|
||||
#endif
|
||||
#ifndef MSG_FILAMENT_CHANGE_OPTION_HEADER
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
|
||||
#endif
|
||||
#ifndef MSG_FILAMENT_CHANGE_OPTION_EXTRUDE
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extrude more")
|
||||
#ifndef MSG_FILAMENT_CHANGE_OPTION_PURGE
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Purge more")
|
||||
#endif
|
||||
#ifndef MSG_FILAMENT_CHANGE_OPTION_RESUME
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Resume print")
|
||||
#endif
|
||||
#ifndef MSG_FILAMENT_CHANGE_MINTEMP
|
||||
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Minimum Temp is ")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Continue")
|
||||
#endif
|
||||
#ifndef MSG_FILAMENT_CHANGE_NOZZLE
|
||||
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Nozzle: ")
|
||||
@ -973,9 +991,9 @@
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Wait for")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament load")
|
||||
#endif
|
||||
#ifndef MSG_FILAMENT_CHANGE_EXTRUDE_1
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Wait for")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("filament extrude")
|
||||
#ifndef MSG_FILAMENT_CHANGE_PURGE_1
|
||||
#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Wait for")
|
||||
#define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("filament purge")
|
||||
#endif
|
||||
#ifndef MSG_FILAMENT_CHANGE_RESUME_1
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wait for print")
|
||||
@ -997,8 +1015,8 @@
|
||||
#ifndef MSG_FILAMENT_CHANGE_LOAD_1
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Loading...")
|
||||
#endif
|
||||
#ifndef MSG_FILAMENT_CHANGE_EXTRUDE_1
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extruding...")
|
||||
#ifndef MSG_FILAMENT_CHANGE_PURGE_1
|
||||
#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Purging...")
|
||||
#endif
|
||||
#ifndef MSG_FILAMENT_CHANGE_RESUME_1
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Resuming...")
|
||||
|
||||
@ -226,12 +226,10 @@
|
||||
#define MSG_DAC_PERCENT _UxGT("Driver %")
|
||||
#define MSG_DAC_EEPROM_WRITE _UxGT("Escribe DAC EEPROM")
|
||||
|
||||
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("IMPR. PAUSADA")
|
||||
#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("IMPR. PAUSADA")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("OPC. REINICIO:")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extruir mas")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Resumir imp.")
|
||||
|
||||
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Temp Minima es ")
|
||||
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Boquilla: ")
|
||||
|
||||
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Esperando iniciar")
|
||||
@ -254,8 +252,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("filamento expulsado")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Esperado por")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("Cargar filamento")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Esperado por")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("Extruir filamento")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Esperando imp.")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("para resumir")
|
||||
#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Oprima boton para")
|
||||
|
||||
@ -225,12 +225,10 @@
|
||||
#define MSG_DAC_PERCENT _UxGT("Driver %")
|
||||
#define MSG_DAC_EEPROM_WRITE _UxGT("Idatzi DAC EEPROM")
|
||||
|
||||
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("HARIZPIA ALDATU")
|
||||
#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("HARIZPIA ALDATU")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("ALDAKETA AUKERAK:")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Gehiago estruitu")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Inprima. jarraitu")
|
||||
|
||||
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Tenp Minimoa ")
|
||||
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Pita: ")
|
||||
|
||||
#endif // LANGUAGE_EU_H
|
||||
|
||||
@ -305,11 +305,7 @@
|
||||
#define MSG_DAC_PERCENT _UxGT("Driver %")
|
||||
#define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM sauv.")
|
||||
|
||||
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("+ extrusion")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Reprendre impr.")
|
||||
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("La temp. minimum est ")
|
||||
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Buse: ")
|
||||
|
||||
#if LCD_HEIGHT >= 4
|
||||
@ -328,8 +324,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Patientez SVP...")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("attente de")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("chargement filament")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("attente de")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("extrusion filament")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("attente impression")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("pour reprendre")
|
||||
#else // LCD_HEIGHT < 4
|
||||
@ -338,7 +332,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Ejection...")
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Inserer et clic")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Chargement...")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extrusion...")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Reprise...")
|
||||
#endif // LCD_HEIGHT < 4
|
||||
|
||||
|
||||
@ -304,11 +304,7 @@
|
||||
#define MSG_DAC_PERCENT _UxGT("Driver %")
|
||||
#define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM sauv.")
|
||||
|
||||
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("+ extrusion")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Reprendre impr.")
|
||||
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("La temp. minimum est ")
|
||||
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Buse: ")
|
||||
|
||||
#if LCD_HEIGHT >= 4
|
||||
@ -327,8 +323,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Patientez SVP...")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("attente de")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("chargement filament")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("attente de")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("extrusion filament")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("attente impression")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("pour reprendre")
|
||||
#else // LCD_HEIGHT < 4
|
||||
@ -337,7 +331,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Ejection...")
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insérer et clic")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Chargement...")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extrusion...")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Reprise...")
|
||||
#endif // LCD_HEIGHT < 4
|
||||
|
||||
|
||||
@ -214,9 +214,6 @@
|
||||
#define MSG_DAC_PERCENT _UxGT("Motor %")
|
||||
#define MSG_DAC_EEPROM_WRITE _UxGT("Garda DAC EEPROM")
|
||||
|
||||
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extruir mais")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Segue traballo")
|
||||
|
||||
#if LCD_HEIGHT >= 4
|
||||
@ -233,9 +230,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Agarde pola")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("carga do")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("filamento")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Agarde pola")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("extrusion do")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 _UxGT("filamento")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Agarde para")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("seguir co")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("traballo")
|
||||
@ -245,7 +239,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Descargando...")
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Introduza e click")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Cargando...")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extruindo...")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Seguindo...")
|
||||
#endif // LCD_HEIGHT < 4
|
||||
|
||||
|
||||
@ -214,9 +214,6 @@
|
||||
#define MSG_DAC_PERCENT _UxGT("Driver %")
|
||||
#define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM Write")
|
||||
|
||||
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extrudiraj više")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Nastavi print")
|
||||
|
||||
#if LCD_HEIGHT >= 4
|
||||
@ -231,8 +228,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("za nastavak...")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Pričekaj")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament load")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Pričekaj")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("filament extrude")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wait for print")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("to resume")
|
||||
#else // LCD_HEIGHT < 4
|
||||
@ -241,7 +236,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Ejecting...")
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insert and Click")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Loading...")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extrudiranje...")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Nastavljam...")
|
||||
#endif // LCD_HEIGHT < 4
|
||||
|
||||
|
||||
@ -301,11 +301,9 @@
|
||||
#define MSG_DAC_PERCENT _UxGT("Driver %")
|
||||
#define MSG_DAC_EEPROM_WRITE _UxGT("Scrivi DAC EEPROM")
|
||||
|
||||
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("STAMPA IN PAUSA")
|
||||
#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("STAMPA IN PAUSA")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("OPZIONI:")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Estrudi ancora")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Riprendi stampa")
|
||||
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Temp minima è ")
|
||||
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Ugello: ")
|
||||
|
||||
#if LCD_HEIGHT >= 4
|
||||
@ -326,9 +324,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Attendere")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("il caricamento")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("del filamento")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Attendere")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("l'estrusione")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 _UxGT("del filamento")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Attendere")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("la ripresa")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("della stampa")
|
||||
@ -339,7 +334,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Inserisci e premi")
|
||||
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Riscaldamento...")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Caricamento...")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Estrusione...")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Ripresa...")
|
||||
#endif // LCD_HEIGHT < 4
|
||||
|
||||
|
||||
@ -285,10 +285,7 @@
|
||||
#else
|
||||
#define MSG_DAC_PERCENT "DAC\xbc\xad\xc2\xd8\xae\xb8" // "DACｼｭﾂﾘｮｸ" ("Driver %")
|
||||
#endif
|
||||
#define MSG_DAC_EEPROM_WRITE MSG_STORE_EPROM // "ﾒﾓﾘﾍｶｸﾉｳ" ("DAC EEPROM Write")
|
||||
#define MSG_FILAMENT_CHANGE_HEADER "PRINT PAUSED"
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_HEADER "RESUME OPTIONS:"
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "\xbb\xd7\xc6\xb5\xbc\xc0\xde\xbd" // "ｻﾗﾆｵｼﾀﾞｽ" ("Extrude more")
|
||||
#define MSG_DAC_EEPROM_WRITE MSG_STORE_EEPROM // "ﾒﾓﾘﾍｶｸﾉｳ" ("DAC EEPROM Write")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME "\xcc\xdf\xd8\xdd\xc4\xbb\xb2\xb6\xb2" // "ﾌﾟﾘﾝﾄｻｲｶｲ" ("Resume print")
|
||||
|
||||
#if LCD_HEIGHT >= 4
|
||||
@ -301,8 +298,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_2 "\xb8\xd8\xaf\xb8\xbd\xd9\xc4\xbf\xde\xaf\xba\xb3\xbc\xcf\xbd" // "ｸﾘｯｸｽﾙﾄｿﾞｯｺｳｼﾏｽ" ("and press button")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 "\xcc\xa8\xd7\xd2\xdd\xc4\xbf\xb3\xc3\xdd\xc1\xad\xb3" // "ﾌｨﾗﾒﾝﾄｿｳﾃﾝﾁｭｳ" ("Wait for")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_2 "\xbc\xca\xde\xd7\xb8\xb5\xcf\xc1\xb8\xc0\xde\xbb\xb2" // "ｼﾊﾞﾗｸｵﾏﾁｸﾀﾞｻｲ" ("filament load")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "\xcc\xa8\xd7\xd2\xdd\xc4\xb5\xbc\xc0\xde\xbc\xc1\xad\xb3" // "ﾌｨﾗﾒﾝﾄｵｼﾀﾞｼﾁｭｳ" ("Wait for")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 "\xbc\xca\xde\xd7\xb8\xb5\xcf\xc1\xb8\xc0\xde\xbb\xb2" // "ｼﾊﾞﾗｸｵﾏﾁｸﾀﾞｻｲ" ("filament extrude")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 "\xcc\xdf\xd8\xdd\xc4\xa6\xbb\xb2\xb6\xb2\xbc\xcf\xbd" // "ﾌﾟﾘﾝﾄｦｻｲｶｲｼﾏｽ" ("Wait for print")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_2 "\xbc\xca\xde\xd7\xb8\xb5\xcf\xc1\xb8\xc0\xde\xbb\xb2" // "ｼﾊﾞﾗｸｵﾏﾁｸﾀﾞｻｲ" ("to resume")
|
||||
#else // LCD_HEIGHT < 4
|
||||
@ -315,7 +310,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_1 "\xbf\xb3\xc6\xad\xb3\xbc\x2c\xb8\xd8\xaf\xb8\xbe\xd6" // "ｿｳﾆｭｳｼ,ｸﾘｯｸｾﾖ" ("Insert and Click")
|
||||
#endif
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 "\xcc\xa8\xd7\xd2\xdd\xc4\xbf\xb3\xc3\xdd\xc1\xad\xb3" // "ﾌｨﾗﾒﾝﾄｿｳﾃﾝﾁｭｳ" ("Loading...")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "\xcc\xa8\xd7\xd2\xdd\xc4\xb5\xbc\xc0\xde\xbc\xc1\xad\xb3" // "ﾌｨﾗﾒﾝﾄｵｼﾀﾞｼﾁｭｳ" ("Extruding...")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 "\xcc\xdf\xd8\xdd\xc4\xa6\xbb\xb2\xb6\xb2\xbc\xcf\xbd" // "ﾌﾟﾘﾝﾄｦｻｲｶｲｼﾏｽ" ("Resuming...")
|
||||
#endif // LCD_HEIGHT < 4
|
||||
|
||||
|
||||
@ -204,10 +204,7 @@
|
||||
#define MSG_INFO_PSU _UxGT("デンゲンシュベツ") // "Power Supply"
|
||||
#define MSG_DRIVE_STRENGTH _UxGT("モータークドウリョク") // "Drive Strength"
|
||||
#define MSG_DAC_PERCENT _UxGT("DACシュツリョク %") // "Driver %"
|
||||
#define MSG_DAC_EEPROM_WRITE MSG_STORE_EPROM // "DAC EEPROM Write"
|
||||
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("サラニオシダス") // "Extrude more"
|
||||
#define MSG_DAC_EEPROM_WRITE MSG_STORE_EEPROM // "DAC EEPROM Write"
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("プリントサイカイ") // "Resume print"
|
||||
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("コウカンヲカイシシマス") // "Wait for start"
|
||||
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("シバラクオマチクダサイ") // "of the filament"
|
||||
@ -217,8 +214,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("クリックスルトゾッコウシマス") // "and press button"
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("フィラメントソウテンチュウ") // "Wait for"
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("シバラクオマチクダサイ") // "filament load"
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("フィラメントオシダシチュウ") // "Wait for"
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("シバラクオマチクダサイ") // "filament extrude"
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("プリントヲサイカイシマス") // "Wait for print"
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("シバラクオマチクダサイ") // "to resume"
|
||||
|
||||
|
||||
@ -226,11 +226,7 @@
|
||||
#define MSG_DRIVE_STRENGTH _UxGT("Motorstroom")
|
||||
#define MSG_DAC_PERCENT _UxGT("Driver %") //accepted English term in Dutch
|
||||
#define MSG_DAC_EEPROM_WRITE _UxGT("DAC Opslaan")
|
||||
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extrudeer meer")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Hervat print")
|
||||
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Minimum Temp is ")
|
||||
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Nozzle: ") //accepeted English term
|
||||
//
|
||||
// Filament Change screens show up to 3 lines on a 4-line display
|
||||
@ -254,9 +250,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Wacht voor")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament te")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("laden")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Wacht voor")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("filament te")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 _UxGT("extruderen")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wacht voor print")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("om verder")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("te gaan")
|
||||
@ -273,8 +266,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("en druk knop")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Wacht voor")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("inladen...")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Wacht voor")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("extrudering")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wacht voor")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("printing...")
|
||||
#endif // LCD_HEIGHT < 4
|
||||
|
||||
@ -213,9 +213,8 @@
|
||||
#define MSG_DAC_PERCENT _UxGT("Siła %")
|
||||
#define MSG_DAC_EEPROM_WRITE _UxGT("Zapisz DAC EEPROM")
|
||||
|
||||
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("ZMIEŃ FILAMENT")
|
||||
#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("ZMIEŃ FILAMENT")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("ZMIEŃ OPCJE:")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Ekstruduj więcej")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Wznów drukowanie")
|
||||
|
||||
#if LCD_HEIGHT >= 4
|
||||
@ -229,8 +228,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("aby kontynuować...")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Czekam na")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("włożenie filamentu")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Czekam na")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("ekstruzję filamentu")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Czekam na")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("wznowienie druku")
|
||||
#else // LCD_HEIGHT < 4
|
||||
@ -239,7 +236,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wysuwanie...")
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Włóż i naciśnij prz.")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Ładowanie...")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Ekstruzja...")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wznowienie...")
|
||||
#endif // LCD_HEIGHT < 4
|
||||
|
||||
|
||||
@ -215,9 +215,8 @@
|
||||
#define MSG_DAC_PERCENT _UxGT("Sila %")
|
||||
#define MSG_DAC_EEPROM_WRITE _UxGT("Zapisz DAC EEPROM")
|
||||
|
||||
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("ZMIEN FILAMENT")
|
||||
#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("ZMIEN FILAMENT")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("ZMIEN OPCJE:")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Ekstruduj wiecej")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Wznow drukowanie")
|
||||
|
||||
#if LCD_HEIGHT >= 4
|
||||
@ -231,8 +230,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("aby kontynuowac...")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Czekam na")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("wlozenie filamentu")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Czekam na")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("ekstruzje filamentu")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Czekam na")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("wznowienie druku")
|
||||
#else // LCD_HEIGHT < 4
|
||||
@ -241,7 +238,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wysuwanie...")
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Wloz i nacisnij prz.")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Ladowanie...")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Ekstruzja...")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wznowienie...")
|
||||
#endif // LCD_HEIGHT < 4
|
||||
|
||||
@ -256,8 +252,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("aby kontynuowac...")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Czekam na")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("wlozenie filamentu")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Czekam na")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("ekstruzje filamentu")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Czekam na")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("wznowienie druku")
|
||||
#else // LCD_HEIGHT < 4
|
||||
@ -266,7 +260,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wysuwanie...")
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Wloz i nacisnij prz.")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Ladowanie...")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Ekstruzja...")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wznowienie...")
|
||||
#endif // LCD_HEIGHT < 4
|
||||
|
||||
|
||||
@ -296,11 +296,9 @@
|
||||
#define MSG_DRIVE_STRENGTH _UxGT("Сила привода")
|
||||
#define MSG_DAC_PERCENT _UxGT("Привод %")
|
||||
#define MSG_DAC_EEPROM_WRITE _UxGT("Записи DAC EEPROM")
|
||||
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("ПЕЧАТЬ ОСТАНОВЛЕНА")
|
||||
#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("ПЕЧАТЬ ОСТАНОВЛЕНА")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("ОПЦИИ ВОЗОБНОВЛЕНИЯ:")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Выдавить ещё")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Возобновить печать")
|
||||
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Мин. температура")
|
||||
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Сопла: ")
|
||||
//
|
||||
// Filament Change screens show up to 3 lines on a 4-line display
|
||||
@ -329,7 +327,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Вставь и нажми")
|
||||
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Нагрев...")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Загрузка...")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Выдавливание...")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Возобновление...")
|
||||
#endif // LCD_HEIGHT < 4
|
||||
|
||||
|
||||
@ -305,11 +305,9 @@
|
||||
#define MSG_DAC_PERCENT _UxGT("Motor %")
|
||||
#define MSG_DAC_EEPROM_WRITE _UxGT("Uložiť do EEPROM")
|
||||
|
||||
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PAUZA TLAČE")
|
||||
#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("PAUZA TLAČE")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("MOŽN. POKRAČ.:")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Ešte vytlačiť")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Obnoviť tlač")
|
||||
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Min. teplota je ")
|
||||
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Tryska: ")
|
||||
|
||||
#if LCD_HEIGHT >= 4
|
||||
@ -330,9 +328,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Čakajte prosím")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("na zavedenie")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("filamentu")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Čakajte prosím")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("na vytlačenie")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 _UxGT("filamentu")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Čakajte prosím")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("na pokračovanie")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("tlače")
|
||||
@ -343,7 +338,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Vložte, kliknite")
|
||||
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Ohrev...")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Zavádzanie...")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Vytlačovanie...")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Pokračovanie...")
|
||||
#endif // LCD_HEIGHT < 4
|
||||
|
||||
|
||||
@ -228,12 +228,8 @@
|
||||
|
||||
#define MSG_DRIVE_STRENGTH _UxGT("Sürücü Gücü") // Sürücü Gücü
|
||||
#define MSG_DAC_PERCENT _UxGT("Sürücü %") // Sürücü %
|
||||
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("Seçenekler:") // Seçenekler:
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Daha Akıt") // Daha Akıt
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Baskıyı sürdür") // Baskıyı sürdür
|
||||
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Min. Sıcaklık") // Min. Sıcaklık:
|
||||
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Nozül: ") // Nozül:
|
||||
|
||||
#if LCD_HEIGHT >= 4
|
||||
@ -252,8 +248,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Lütfen Bekleyin...") // Lütfen Bekleyin...
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Bekleniyor") // Bekleniyor
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filamanın yüklenmesi") // filamanın yüklenmesi
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Bekleniyor") // Bekleniyor
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("filaman akması") // filaman akması
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Baskının sürdürülmesini") // Baskının sürdürülmesini
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("bekle") // bekle
|
||||
#else // LCD_HEIGHT < 4
|
||||
@ -262,7 +256,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Çıkartılıyor...") // Çıkartılıyor...
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Yükle ve bas") // Yükle ve bas
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Yüklüyor...") // Yüklüyor...
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Akıtılıyor...") // Akıtılıyor...
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Sürdürülüyor...") // Sürdürülüyor...
|
||||
#endif // LCD_HEIGHT < 4
|
||||
|
||||
|
||||
@ -204,9 +204,6 @@
|
||||
#define MSG_DAC_PERCENT _UxGT("% мотору")
|
||||
#define MSG_DAC_EEPROM_WRITE _UxGT("Запис ЦАП на ПЗП")
|
||||
|
||||
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Екструдувати")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Відновити друк")
|
||||
|
||||
#if LCD_HEIGHT >= 4
|
||||
@ -221,9 +218,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("продовження...")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Зачекайте на")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("ввід волокна")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Зачекайте на")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("екструзію")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 _UxGT("волокна")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Зачекайте на")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("відновлення")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("друку")
|
||||
@ -233,7 +227,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Вивід...")
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Вставте і нат.")
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Ввід...")
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Екструзія...")
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Відновлення...")
|
||||
#endif // LCD_HEIGHT < 4
|
||||
|
||||
|
||||
@ -201,9 +201,6 @@
|
||||
#define MSG_INFO_MAX_TEMP _UxGT("最高温度") //"Max Temp"
|
||||
#define MSG_INFO_PSU _UxGT("电源供应") //"Power Supply"
|
||||
|
||||
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("挤出更多") //"Extrude more"
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("恢复打印") //"Resume print"
|
||||
|
||||
#if LCD_HEIGHT >= 4
|
||||
@ -219,9 +216,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("等待") //"Wait for"
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("进料") //"filament load"
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("") //""
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("等待") //"Wait for"
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("丝料挤出") //"filament extrude"
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 _UxGT("") //""
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("等待打印") //"Wait for print"
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("恢复") //"to resume"
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("") //""
|
||||
@ -231,7 +225,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("退出中 ...") //"Ejecting..."
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("插入并单击") //"Insert and Click"
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("装载中 ...") //"Loading..."
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("挤出中 ...") //"Extruding..."
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("恢复中 ...") //"Resuming..."
|
||||
#endif // LCD_HEIGHT < 4
|
||||
|
||||
|
||||
@ -201,9 +201,6 @@
|
||||
#define MSG_INFO_MAX_TEMP _UxGT("最高溫度") //"Max Temp"
|
||||
#define MSG_INFO_PSU _UxGT("電源供應") //"Power Supply"
|
||||
|
||||
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("擠出更多") //"Extrude more"
|
||||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("恢復列印") //"Resume print"
|
||||
|
||||
#if LCD_HEIGHT >= 4
|
||||
@ -219,9 +216,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("等待") //"Wait for"
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("進料") //"filament load"
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("") //""
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("等待") //"Wait for"
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("絲料擠出") //"filament extrude"
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 _UxGT("") //""
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("等待列印") //"Wait for print"
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("恢復") //"to resume"
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("") //""
|
||||
@ -231,7 +225,6 @@
|
||||
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("退出中 ...") //"Ejecting..."
|
||||
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("插入並點擊") //"Insert and Click"
|
||||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("載入中 ...") //"Loading..."
|
||||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("擠出中 ...") //"Extruding..."
|
||||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("恢復中 ...") //"Resuming..."
|
||||
#endif // LCD_HEIGHT < 4
|
||||
|
||||
|
||||
@ -39,6 +39,10 @@
|
||||
|
||||
#include "../Marlin.h"
|
||||
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#include "../feature/pause.h"
|
||||
#endif
|
||||
|
||||
#if ENABLED(PRINTCOUNTER) && ENABLED(LCD_INFO_MENU)
|
||||
#include "../libs/duration_t.h"
|
||||
#endif
|
||||
@ -183,7 +187,7 @@ uint16_t max_display_update_time = 0;
|
||||
void lcd_control_temperature_preheat_material2_settings_menu();
|
||||
#endif
|
||||
|
||||
#if DISABLED(NO_VOLUMETRICS)
|
||||
#if DISABLED(NO_VOLUMETRICS) || ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
void lcd_control_filament_menu();
|
||||
#endif
|
||||
|
||||
@ -201,14 +205,18 @@ uint16_t max_display_update_time = 0;
|
||||
#endif
|
||||
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
void lcd_advanced_pause_toocold_menu();
|
||||
#if E_STEPPERS > 1 || ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
|
||||
void lcd_change_filament_menu();
|
||||
#else
|
||||
void lcd_temp_menu_e0_filament_change();
|
||||
#endif
|
||||
void lcd_advanced_pause_option_menu();
|
||||
void lcd_advanced_pause_init_message();
|
||||
void lcd_advanced_pause_unload_message();
|
||||
void lcd_advanced_pause_insert_message();
|
||||
void lcd_advanced_pause_load_message();
|
||||
void lcd_advanced_pause_heat_nozzle();
|
||||
void lcd_advanced_pause_extrude_message();
|
||||
void lcd_advanced_pause_purge_message();
|
||||
void lcd_advanced_pause_resume_message();
|
||||
#endif
|
||||
|
||||
@ -303,36 +311,40 @@ uint16_t max_display_update_time = 0;
|
||||
if (encoderLine == _thisItemNr && lcd_clicked) { \
|
||||
lcd_clicked = false
|
||||
|
||||
#define _MENU_ITEM_PART_2(TYPE, LABEL, ...) \
|
||||
#define _MENU_ITEM_PART_2(TYPE, PLABEL, ...) \
|
||||
menu_action_ ## TYPE(__VA_ARGS__); \
|
||||
if (screen_changed) return; \
|
||||
} \
|
||||
if (lcdDrawUpdate) \
|
||||
lcd_implementation_drawmenu_ ## TYPE(encoderLine == _thisItemNr, _lcdLineNr, PSTR(LABEL), ## __VA_ARGS__); \
|
||||
lcd_implementation_drawmenu_ ## TYPE(encoderLine == _thisItemNr, _lcdLineNr, PLABEL, ## __VA_ARGS__); \
|
||||
} \
|
||||
++_thisItemNr
|
||||
|
||||
#define MENU_ITEM(TYPE, LABEL, ...) do { \
|
||||
#define MENU_ITEM_P(TYPE, PLABEL, ...) do { \
|
||||
_skipStatic = false; \
|
||||
_MENU_ITEM_PART_1(TYPE, ## __VA_ARGS__); \
|
||||
_MENU_ITEM_PART_2(TYPE, LABEL, ## __VA_ARGS__); \
|
||||
_MENU_ITEM_PART_2(TYPE, PLABEL, ## __VA_ARGS__); \
|
||||
}while(0)
|
||||
|
||||
#define MENU_ITEM(TYPE, LABEL, ...) MENU_ITEM_P(TYPE, PSTR(LABEL), ## __VA_ARGS__)
|
||||
|
||||
#define MENU_BACK(LABEL) MENU_ITEM(back, LABEL, 0)
|
||||
|
||||
// Used to print static text with no visible cursor.
|
||||
// Parameters: label [, bool center [, bool invert [, char *value] ] ]
|
||||
#define STATIC_ITEM(LABEL, ...) \
|
||||
#define STATIC_ITEM_P(LABEL, ...) \
|
||||
if (_menuLineNr == _thisItemNr) { \
|
||||
if (_skipStatic && encoderLine <= _thisItemNr) { \
|
||||
encoderPosition += ENCODER_STEPS_PER_MENU_ITEM; \
|
||||
++encoderLine; \
|
||||
} \
|
||||
if (lcdDrawUpdate) \
|
||||
lcd_implementation_drawmenu_static(_lcdLineNr, PSTR(LABEL), ## __VA_ARGS__); \
|
||||
lcd_implementation_drawmenu_static(_lcdLineNr, LABEL, ## __VA_ARGS__); \
|
||||
} \
|
||||
++_thisItemNr
|
||||
|
||||
#define STATIC_ITEM(LABEL, ...) STATIC_ITEM_P(PSTR(LABEL), ## __VA_ARGS__)
|
||||
|
||||
#if ENABLED(ENCODER_RATE_MULTIPLIER)
|
||||
|
||||
bool encoderRateMultiplierEnabled;
|
||||
@ -343,11 +355,11 @@ uint16_t max_display_update_time = 0;
|
||||
/**
|
||||
* MENU_MULTIPLIER_ITEM generates drawing and handling code for a multiplier menu item
|
||||
*/
|
||||
#define MENU_MULTIPLIER_ITEM(type, label, ...) do { \
|
||||
_MENU_ITEM_PART_1(type, ## __VA_ARGS__); \
|
||||
#define MENU_MULTIPLIER_ITEM(TYPE, LABEL, ...) do { \
|
||||
_MENU_ITEM_PART_1(TYPE, ## __VA_ARGS__); \
|
||||
encoderRateMultiplierEnabled = true; \
|
||||
lastEncoderMovementMillis = 0; \
|
||||
_MENU_ITEM_PART_2(type, label, ## __VA_ARGS__); \
|
||||
_MENU_ITEM_PART_2(TYPE, PSTR(LABEL), ## __VA_ARGS__); \
|
||||
}while(0)
|
||||
|
||||
#else // !ENCODER_RATE_MULTIPLIER
|
||||
@ -355,14 +367,14 @@ uint16_t max_display_update_time = 0;
|
||||
#endif // !ENCODER_RATE_MULTIPLIER
|
||||
|
||||
#define MENU_ITEM_DUMMY() do { _thisItemNr++; }while(0)
|
||||
#define MENU_ITEM_EDIT(type, label, ...) MENU_ITEM(setting_edit_ ## type, label, PSTR(label), ## __VA_ARGS__)
|
||||
#define MENU_ITEM_EDIT_CALLBACK(type, label, ...) MENU_ITEM(setting_edit_callback_ ## type, label, PSTR(label), ## __VA_ARGS__)
|
||||
#define MENU_ITEM_EDIT(TYPE, LABEL, ...) MENU_ITEM(setting_edit_ ## TYPE, LABEL, PSTR(LABEL), ## __VA_ARGS__)
|
||||
#define MENU_ITEM_EDIT_CALLBACK(TYPE, LABEL, ...) MENU_ITEM(setting_edit_callback_ ## TYPE, LABEL, PSTR(LABEL), ## __VA_ARGS__)
|
||||
#if ENABLED(ENCODER_RATE_MULTIPLIER)
|
||||
#define MENU_MULTIPLIER_ITEM_EDIT(type, label, ...) MENU_MULTIPLIER_ITEM(setting_edit_ ## type, label, PSTR(label), ## __VA_ARGS__)
|
||||
#define MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(type, label, ...) MENU_MULTIPLIER_ITEM(setting_edit_callback_ ## type, label, PSTR(label), ## __VA_ARGS__)
|
||||
#define MENU_MULTIPLIER_ITEM_EDIT(TYPE, LABEL, ...) MENU_MULTIPLIER_ITEM(setting_edit_ ## TYPE, LABEL, PSTR(LABEL), ## __VA_ARGS__)
|
||||
#define MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(TYPE, LABEL, ...) MENU_MULTIPLIER_ITEM(setting_edit_callback_ ## TYPE, LABEL, PSTR(LABEL), ## __VA_ARGS__)
|
||||
#else // !ENCODER_RATE_MULTIPLIER
|
||||
#define MENU_MULTIPLIER_ITEM_EDIT(type, label, ...) MENU_ITEM(setting_edit_ ## type, label, PSTR(label), ## __VA_ARGS__)
|
||||
#define MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(type, label, ...) MENU_ITEM(setting_edit_callback_ ## type, label, PSTR(label), ## __VA_ARGS__)
|
||||
#define MENU_MULTIPLIER_ITEM_EDIT(TYPE, LABEL, ...) MENU_ITEM(setting_edit_ ## TYPE, LABEL, PSTR(LABEL), ## __VA_ARGS__)
|
||||
#define MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(TYPE, LABEL, ...) MENU_ITEM(setting_edit_callback_ ## TYPE, LABEL, PSTR(LABEL), ## __VA_ARGS__)
|
||||
#endif // !ENCODER_RATE_MULTIPLIER
|
||||
|
||||
/**
|
||||
@ -1245,61 +1257,6 @@ void kill_screen(const char* lcd_msg) {
|
||||
#endif
|
||||
}
|
||||
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
|
||||
void lcd_enqueue_filament_change(
|
||||
#if EXTRUDERS > 1
|
||||
const uint8_t extruder
|
||||
#endif
|
||||
) {
|
||||
|
||||
#if ENABLED(PREVENT_COLD_EXTRUSION)
|
||||
if (!DEBUGGING(DRYRUN) && thermalManager.tooColdToExtrude(active_extruder)) {
|
||||
lcd_save_previous_screen();
|
||||
lcd_goto_screen(lcd_advanced_pause_toocold_menu);
|
||||
return;
|
||||
}
|
||||
#endif
|
||||
|
||||
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_INIT);
|
||||
|
||||
#if EXTRUDERS <= 1
|
||||
enqueue_and_echo_commands_P(PSTR("M600 B0"));
|
||||
#else
|
||||
char *command_M600;
|
||||
switch (extruder) {
|
||||
case 0: command_M600 = PSTR("M600 B0 T0"); break;
|
||||
case 1: command_M600 = PSTR("M600 B0 T1"); break;
|
||||
#if EXTRUDERS > 2
|
||||
case 2: command_M600 = PSTR("M600 B0 T2"); break;
|
||||
#if EXTRUDERS > 3
|
||||
case 3: command_M600 = PSTR("M600 B0 T3"); break;
|
||||
#if EXTRUDERS > 4
|
||||
case 4: command_M600 = PSTR("M600 B0 T4"); break;
|
||||
#endif // EXTRUDERS > 4
|
||||
#endif // EXTRUDERS > 3
|
||||
#endif // EXTRUDERS > 2
|
||||
}
|
||||
enqueue_and_echo_commands_P(command_M600);
|
||||
#endif // EXTRUDERS > 1
|
||||
}
|
||||
|
||||
#if EXTRUDERS > 1
|
||||
void lcd_enqueue_filament_change_e0() { lcd_enqueue_filament_change(0); }
|
||||
void lcd_enqueue_filament_change_e1() { lcd_enqueue_filament_change(1); }
|
||||
#if EXTRUDERS > 2
|
||||
void lcd_enqueue_filament_change_e2() { lcd_enqueue_filament_change(2); }
|
||||
#if EXTRUDERS > 3
|
||||
void lcd_enqueue_filament_change_e3() { lcd_enqueue_filament_change(3); }
|
||||
#if EXTRUDERS > 4
|
||||
void lcd_enqueue_filament_change_e4() { lcd_enqueue_filament_change(4); }
|
||||
#endif // EXTRUDERS > 4
|
||||
#endif // EXTRUDERS > 3
|
||||
#endif // EXTRUDERS > 2
|
||||
#endif // EXTRUDERS > 1
|
||||
|
||||
#endif // ADVANCED_PAUSE_FEATURE
|
||||
|
||||
// First Fan Speed title in "Tune" and "Control>Temperature" menus
|
||||
#if FAN_COUNT > 0 && HAS_FAN0
|
||||
#if FAN_COUNT > 1
|
||||
@ -1441,26 +1398,13 @@ void kill_screen(const char* lcd_msg) {
|
||||
// Change filament
|
||||
//
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#if EXTRUDERS > 1
|
||||
if (!thermalManager.tooColdToExtrude(0))
|
||||
MENU_ITEM(function, MSG_FILAMENTCHANGE " " MSG_E1, lcd_enqueue_filament_change_e0);
|
||||
if (!thermalManager.tooColdToExtrude(1))
|
||||
MENU_ITEM(function, MSG_FILAMENTCHANGE " " MSG_E2, lcd_enqueue_filament_change_e1);
|
||||
#if EXTRUDERS > 2
|
||||
if (!thermalManager.tooColdToExtrude(2))
|
||||
MENU_ITEM(function, MSG_FILAMENTCHANGE " " MSG_E3, lcd_enqueue_filament_change_e2);
|
||||
#if EXTRUDERS > 3
|
||||
if (!thermalManager.tooColdToExtrude(3))
|
||||
MENU_ITEM(function, MSG_FILAMENTCHANGE " " MSG_E4, lcd_enqueue_filament_change_e3);
|
||||
#if EXTRUDERS > 4
|
||||
if (!thermalManager.tooColdToExtrude(4))
|
||||
MENU_ITEM(function, MSG_FILAMENTCHANGE " " MSG_E5, lcd_enqueue_filament_change_e4);
|
||||
#endif // EXTRUDERS > 4
|
||||
#endif // EXTRUDERS > 3
|
||||
#endif // EXTRUDERS > 2
|
||||
#if E_STEPPERS == 1 && !ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
|
||||
if (!thermalManager.targetTooColdToExtrude(active_extruder))
|
||||
MENU_ITEM(gcode, MSG_FILAMENTCHANGE, PSTR("M600 B0"));
|
||||
else
|
||||
MENU_ITEM(submenu, MSG_FILAMENTCHANGE, lcd_temp_menu_e0_filament_change);
|
||||
#else
|
||||
if (!thermalManager.tooColdToExtrude(active_extruder))
|
||||
MENU_ITEM(function, MSG_FILAMENTCHANGE, lcd_enqueue_filament_change);
|
||||
MENU_ITEM(submenu, MSG_FILAMENTCHANGE, lcd_change_filament_menu);
|
||||
#endif
|
||||
#endif
|
||||
|
||||
@ -2647,7 +2591,6 @@ void kill_screen(const char* lcd_msg) {
|
||||
// Set Home Offsets
|
||||
//
|
||||
MENU_ITEM(function, MSG_SET_HOME_OFFSETS, lcd_set_home_offsets);
|
||||
//MENU_ITEM(gcode, MSG_SET_ORIGIN, PSTR("G92 X0 Y0 Z0"));
|
||||
#endif
|
||||
|
||||
//
|
||||
@ -2660,26 +2603,13 @@ void kill_screen(const char* lcd_msg) {
|
||||
//
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
if (!IS_SD_FILE_OPEN) {
|
||||
#if EXTRUDERS > 1
|
||||
if (!thermalManager.tooColdToExtrude(0))
|
||||
MENU_ITEM(function, MSG_FILAMENTCHANGE " " MSG_E1, lcd_enqueue_filament_change_e0);
|
||||
if (!thermalManager.tooColdToExtrude(1))
|
||||
MENU_ITEM(function, MSG_FILAMENTCHANGE " " MSG_E2, lcd_enqueue_filament_change_e1);
|
||||
#if EXTRUDERS > 2
|
||||
if (!thermalManager.tooColdToExtrude(2))
|
||||
MENU_ITEM(function, MSG_FILAMENTCHANGE " " MSG_E3, lcd_enqueue_filament_change_e2);
|
||||
#if EXTRUDERS > 3
|
||||
if (!thermalManager.tooColdToExtrude(3))
|
||||
MENU_ITEM(function, MSG_FILAMENTCHANGE " " MSG_E4, lcd_enqueue_filament_change_e3);
|
||||
#if EXTRUDERS > 4
|
||||
if (!thermalManager.tooColdToExtrude(4))
|
||||
MENU_ITEM(function, MSG_FILAMENTCHANGE " " MSG_E5, lcd_enqueue_filament_change_e4);
|
||||
#endif // EXTRUDERS > 4
|
||||
#endif // EXTRUDERS > 3
|
||||
#endif // EXTRUDERS > 2
|
||||
#if E_STEPPERS == 1 && !ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
|
||||
if (!thermalManager.targetTooColdToExtrude(active_extruder))
|
||||
MENU_ITEM(gcode, MSG_FILAMENTCHANGE, PSTR("M600 B0"));
|
||||
else
|
||||
MENU_ITEM(submenu, MSG_FILAMENTCHANGE, lcd_temp_menu_e0_filament_change);
|
||||
#else
|
||||
if (!thermalManager.tooColdToExtrude(active_extruder))
|
||||
MENU_ITEM(function, MSG_FILAMENTCHANGE, lcd_enqueue_filament_change);
|
||||
MENU_ITEM(submenu, MSG_FILAMENTCHANGE, lcd_change_filament_menu);
|
||||
#endif
|
||||
}
|
||||
#endif // ADVANCED_PAUSE_FEATURE
|
||||
@ -3228,14 +3158,14 @@ void kill_screen(const char* lcd_msg) {
|
||||
MENU_ITEM(submenu, MSG_TEMPERATURE, lcd_control_temperature_menu);
|
||||
MENU_ITEM(submenu, MSG_MOTION, lcd_control_motion_menu);
|
||||
|
||||
#if DISABLED(NO_VOLUMETRICS)
|
||||
#if DISABLED(NO_VOLUMETRICS) || ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
MENU_ITEM(submenu, MSG_FILAMENT, lcd_control_filament_menu);
|
||||
#elif ENABLED(LIN_ADVANCE)
|
||||
MENU_ITEM_EDIT(float3, MSG_ADVANCE_K, &planner.extruder_advance_k, 0, 999);
|
||||
#endif
|
||||
|
||||
#if HAS_LCD_CONTRAST
|
||||
MENU_ITEM_EDIT_CALLBACK(int3, MSG_CONTRAST, (int16_t*) &lcd_contrast, LCD_CONTRAST_MIN, LCD_CONTRAST_MAX, lcd_callback_set_contrast, true);
|
||||
MENU_ITEM_EDIT_CALLBACK(int3, MSG_CONTRAST, &lcd_contrast, LCD_CONTRAST_MIN, LCD_CONTRAST_MAX, lcd_callback_set_contrast, true);
|
||||
#endif
|
||||
#if ENABLED(FWRETRACT)
|
||||
MENU_ITEM(submenu, MSG_RETRACT, lcd_control_retract_menu);
|
||||
@ -3487,7 +3417,7 @@ void kill_screen(const char* lcd_msg) {
|
||||
|
||||
#if DISABLED(SLIM_LCD_MENUS)
|
||||
|
||||
void _lcd_control_temperature_preheat_settings_menu(uint8_t material) {
|
||||
void _lcd_control_temperature_preheat_settings_menu(const uint8_t material) {
|
||||
#if HOTENDS > 4
|
||||
#define MINTEMP_ALL MIN5(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP, HEATER_3_MINTEMP, HEATER_4_MINTEMP)
|
||||
#define MAXTEMP_ALL MAX5(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP)
|
||||
@ -3733,7 +3663,7 @@ void kill_screen(const char* lcd_msg) {
|
||||
END_MENU();
|
||||
}
|
||||
|
||||
#if DISABLED(NO_VOLUMETRICS)
|
||||
#if DISABLED(NO_VOLUMETRICS) || ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
/**
|
||||
*
|
||||
* "Control" > "Filament" submenu
|
||||
@ -3747,6 +3677,7 @@ void kill_screen(const char* lcd_msg) {
|
||||
MENU_ITEM_EDIT(float3, MSG_ADVANCE_K, &planner.extruder_advance_k, 0, 999);
|
||||
#endif
|
||||
|
||||
#if DISABLED(NO_VOLUMETRICS)
|
||||
MENU_ITEM_EDIT_CALLBACK(bool, MSG_VOLUMETRIC_ENABLED, &parser.volumetric_enabled, planner.calculate_volumetric_multipliers);
|
||||
|
||||
if (parser.volumetric_enabled) {
|
||||
@ -3767,10 +3698,55 @@ void kill_screen(const char* lcd_msg) {
|
||||
#endif // EXTRUDERS > 2
|
||||
#endif // EXTRUDERS > 1
|
||||
}
|
||||
#endif
|
||||
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
const float extrude_maxlength =
|
||||
#if ENABLED(PREVENT_LENGTHY_EXTRUDE)
|
||||
EXTRUDE_MAXLENGTH
|
||||
#else
|
||||
999.0f
|
||||
#endif
|
||||
;
|
||||
|
||||
#if EXTRUDERS == 1
|
||||
MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_UNLOAD, &filament_change_unload_length[0], 0.0, extrude_maxlength);
|
||||
#else // EXTRUDERS > 1
|
||||
MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_UNLOAD, &filament_change_unload_length[active_extruder], 0.0, extrude_maxlength);
|
||||
MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_UNLOAD MSG_DIAM_E1, &filament_change_unload_length[0], 0.0, extrude_maxlength);
|
||||
MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_UNLOAD MSG_DIAM_E2, &filament_change_unload_length[1], 0.0, extrude_maxlength);
|
||||
#if EXTRUDERS > 2
|
||||
MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_UNLOAD MSG_DIAM_E3, &filament_change_unload_length[2], 0.0, extrude_maxlength);
|
||||
#if EXTRUDERS > 3
|
||||
MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_UNLOAD MSG_DIAM_E4, &filament_change_unload_length[3], 0.0, extrude_maxlength);
|
||||
#if EXTRUDERS > 4
|
||||
MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_UNLOAD MSG_DIAM_E5, &filament_change_unload_length[4], 0.0, extrude_maxlength);
|
||||
#endif // EXTRUDERS > 4
|
||||
#endif // EXTRUDERS > 3
|
||||
#endif // EXTRUDERS > 2
|
||||
#endif // EXTRUDERS > 1
|
||||
|
||||
#if EXTRUDERS == 1
|
||||
MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_LOAD, &filament_change_load_length[0], 0.0, extrude_maxlength);
|
||||
#else // EXTRUDERS > 1
|
||||
MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_LOAD, &filament_change_load_length[active_extruder], 0.0, extrude_maxlength);
|
||||
MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_LOAD MSG_DIAM_E1, &filament_change_load_length[0], 0.0, extrude_maxlength);
|
||||
MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_LOAD MSG_DIAM_E2, &filament_change_load_length[1], 0.0, extrude_maxlength);
|
||||
#if EXTRUDERS > 2
|
||||
MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_LOAD MSG_DIAM_E3, &filament_change_load_length[2], 0.0, extrude_maxlength);
|
||||
#if EXTRUDERS > 3
|
||||
MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_LOAD MSG_DIAM_E4, &filament_change_load_length[3], 0.0, extrude_maxlength);
|
||||
#if EXTRUDERS > 4
|
||||
MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_LOAD MSG_DIAM_E5, &filament_change_load_length[4], 0.0, extrude_maxlength);
|
||||
#endif // EXTRUDERS > 4
|
||||
#endif // EXTRUDERS > 3
|
||||
#endif // EXTRUDERS > 2
|
||||
#endif // EXTRUDERS > 1
|
||||
#endif
|
||||
|
||||
END_MENU();
|
||||
}
|
||||
#endif // !NO_VOLUMETRICS
|
||||
#endif // !NO_VOLUMETRICS || ADVANCED_PAUSE_FEATURE
|
||||
|
||||
/**
|
||||
*
|
||||
@ -4127,12 +4103,258 @@ void kill_screen(const char* lcd_msg) {
|
||||
*/
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
|
||||
/**
|
||||
*
|
||||
* "Change Filament" > "Change/Unload/Load Filament" submenu
|
||||
*
|
||||
*/
|
||||
static AdvancedPauseMode _change_filament_temp_mode;
|
||||
static int8_t _change_filament_temp_extruder;
|
||||
|
||||
static const char* _change_filament_temp_command() {
|
||||
switch (_change_filament_temp_mode) {
|
||||
case ADVANCED_PAUSE_MODE_LOAD_FILAMENT:
|
||||
return PSTR("M701 T%d");
|
||||
case ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT:
|
||||
return _change_filament_temp_extruder >= 0 ? PSTR("M702 T%d") : PSTR("M702 ;%d");
|
||||
case ADVANCED_PAUSE_MODE_PAUSE_PRINT:
|
||||
default:
|
||||
return PSTR("M600 B0 T%d");
|
||||
}
|
||||
return PSTR(MSG_FILAMENTCHANGE);
|
||||
}
|
||||
|
||||
void _change_filament_temp(const uint8_t index) {
|
||||
char cmd[11];
|
||||
sprintf_P(cmd, _change_filament_temp_command(), _change_filament_temp_extruder);
|
||||
thermalManager.setTargetHotend(index == 1 ? PREHEAT_1_TEMP_HOTEND : PREHEAT_2_TEMP_HOTEND, _change_filament_temp_extruder);
|
||||
lcd_enqueue_command(cmd);
|
||||
}
|
||||
void _lcd_change_filament_temp_1_menu() { _change_filament_temp(1); }
|
||||
void _lcd_change_filament_temp_2_menu() { _change_filament_temp(2); }
|
||||
|
||||
static const char* change_filament_header(const AdvancedPauseMode mode) {
|
||||
switch (mode) {
|
||||
case ADVANCED_PAUSE_MODE_LOAD_FILAMENT:
|
||||
return PSTR(MSG_FILAMENTLOAD);
|
||||
case ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT:
|
||||
return PSTR(MSG_FILAMENTUNLOAD);
|
||||
default: break;
|
||||
}
|
||||
return PSTR(MSG_FILAMENTCHANGE);
|
||||
}
|
||||
|
||||
void _lcd_temp_menu_filament_op(const AdvancedPauseMode mode, const int8_t extruder) {
|
||||
_change_filament_temp_mode = mode;
|
||||
_change_filament_temp_extruder = extruder;
|
||||
START_MENU();
|
||||
if (LCD_HEIGHT >= 4) STATIC_ITEM_P(change_filament_header(mode), true, true);
|
||||
MENU_BACK(MSG_FILAMENTCHANGE);
|
||||
MENU_ITEM(submenu, MSG_PREHEAT_1, _lcd_change_filament_temp_1_menu);
|
||||
MENU_ITEM(submenu, MSG_PREHEAT_2, _lcd_change_filament_temp_2_menu);
|
||||
END_MENU();
|
||||
}
|
||||
void lcd_temp_menu_e0_filament_change() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_PAUSE_PRINT, 0); }
|
||||
void lcd_temp_menu_e0_filament_load() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_LOAD_FILAMENT, 0); }
|
||||
void lcd_temp_menu_e0_filament_unload() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT, 0); }
|
||||
#if E_STEPPERS > 1
|
||||
void lcd_temp_menu_e1_filament_change() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_PAUSE_PRINT, 1); }
|
||||
void lcd_temp_menu_e1_filament_load() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_LOAD_FILAMENT, 1); }
|
||||
void lcd_temp_menu_e1_filament_unload() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT, 1); }
|
||||
#if ENABLED(FILAMENT_UNLOAD_ALL_EXTRUDERS)
|
||||
void lcd_unload_filament_all_temp_menu() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT, -1); }
|
||||
#endif
|
||||
#if E_STEPPERS > 2
|
||||
void lcd_temp_menu_e2_filament_change() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_PAUSE_PRINT, 2); }
|
||||
void lcd_temp_menu_e2_filament_load() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_LOAD_FILAMENT, 2); }
|
||||
void lcd_temp_menu_e2_filament_unload() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT, 2); }
|
||||
#if E_STEPPERS > 3
|
||||
void lcd_temp_menu_e3_filament_change() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_PAUSE_PRINT, 3); }
|
||||
void lcd_temp_menu_e3_filament_load() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_LOAD_FILAMENT, 3); }
|
||||
void lcd_temp_menu_e3_filament_unload() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT, 3); }
|
||||
#if E_STEPPERS > 4
|
||||
void lcd_temp_menu_e4_filament_change() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_PAUSE_PRINT, 4); }
|
||||
void lcd_temp_menu_e4_filament_load() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_LOAD_FILAMENT, 4); }
|
||||
void lcd_temp_menu_e4_filament_unload() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT, 4); }
|
||||
#endif // E_STEPPERS > 4
|
||||
#endif // E_STEPPERS > 3
|
||||
#endif // E_STEPPERS > 2
|
||||
#endif // E_STEPPERS > 1
|
||||
|
||||
/**
|
||||
*
|
||||
* "Change Filament" submenu
|
||||
*
|
||||
*/
|
||||
#if E_STEPPERS > 1 || ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
|
||||
void lcd_change_filament_menu() {
|
||||
START_MENU();
|
||||
MENU_BACK(MSG_PREPARE);
|
||||
|
||||
// Change filament
|
||||
#if E_STEPPERS == 1
|
||||
PGM_P msg0 = PSTR(MSG_FILAMENTCHANGE);
|
||||
if (thermalManager.targetTooColdToExtrude(active_extruder))
|
||||
MENU_ITEM_P(submenu, msg0, lcd_temp_menu_e0_filament_change);
|
||||
else
|
||||
MENU_ITEM_P(gcode, msg0, PSTR("M600 B0"));
|
||||
#else
|
||||
PGM_P msg0 = PSTR(MSG_FILAMENTCHANGE " " MSG_E1);
|
||||
PGM_P msg1 = PSTR(MSG_FILAMENTCHANGE " " MSG_E2);
|
||||
if (thermalManager.targetTooColdToExtrude(0))
|
||||
MENU_ITEM_P(submenu, msg0, lcd_temp_menu_e0_filament_change);
|
||||
else
|
||||
MENU_ITEM_P(gcode, msg0, PSTR("M600 B0 T0"));
|
||||
if (thermalManager.targetTooColdToExtrude(1))
|
||||
MENU_ITEM_P(submenu, msg1, lcd_temp_menu_e1_filament_change);
|
||||
else
|
||||
MENU_ITEM_P(gcode, msg1, PSTR("M600 B0 T1"));
|
||||
#if E_STEPPERS > 2
|
||||
PGM_P msg2 = PSTR(MSG_FILAMENTCHANGE " " MSG_E3);
|
||||
if (thermalManager.targetTooColdToExtrude(2))
|
||||
MENU_ITEM_P(submenu, msg2, lcd_temp_menu_e2_filament_change);
|
||||
else
|
||||
MENU_ITEM_P(gcode, msg2, PSTR("M600 B0 T2"));
|
||||
#if E_STEPPERS > 3
|
||||
PGM_P msg3 = PSTR(MSG_FILAMENTCHANGE " " MSG_E4);
|
||||
if (thermalManager.targetTooColdToExtrude(3))
|
||||
MENU_ITEM_P(submenu, msg3, lcd_temp_menu_e3_filament_change);
|
||||
else
|
||||
MENU_ITEM_P(gcode, msg3, PSTR("M600 B0 T3"));
|
||||
#if E_STEPPERS > 4
|
||||
PGM_P msg4 = PSTR(MSG_FILAMENTCHANGE " " MSG_E5);
|
||||
if (thermalManager.targetTooColdToExtrude(4))
|
||||
MENU_ITEM_P(submenu, msg4, lcd_temp_menu_e4_filament_change);
|
||||
else
|
||||
MENU_ITEM_P(gcode, msg4, PSTR("M600 B0 T4"));
|
||||
#endif // E_STEPPERS > 4
|
||||
#endif // E_STEPPERS > 3
|
||||
#endif // E_STEPPERS > 2
|
||||
#endif // E_STEPPERS == 1
|
||||
|
||||
#if ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
|
||||
if (!planner.movesplanned() && !IS_SD_FILE_OPEN) {
|
||||
// Load filament
|
||||
#if E_STEPPERS == 1
|
||||
PGM_P msg0 = PSTR(MSG_FILAMENTLOAD);
|
||||
if (thermalManager.targetTooColdToExtrude(active_extruder))
|
||||
MENU_ITEM_P(submenu, msg0, lcd_temp_menu_e0_filament_load);
|
||||
else
|
||||
MENU_ITEM_P(gcode, msg0, PSTR("M701"));
|
||||
#else
|
||||
PGM_P msg0 = PSTR(MSG_FILAMENTLOAD " " MSG_E1);
|
||||
PGM_P msg1 = PSTR(MSG_FILAMENTLOAD " " MSG_E2);
|
||||
if (thermalManager.targetTooColdToExtrude(0))
|
||||
MENU_ITEM_P(submenu, msg0, lcd_temp_menu_e0_filament_load);
|
||||
else
|
||||
MENU_ITEM_P(gcode, msg0, PSTR("M701 T0"));
|
||||
if (thermalManager.targetTooColdToExtrude(1))
|
||||
MENU_ITEM_P(submenu, msg1, lcd_temp_menu_e1_filament_load);
|
||||
else
|
||||
MENU_ITEM_P(gcode, msg1, PSTR("M701 T1"));
|
||||
#if E_STEPPERS > 2
|
||||
PGM_P msg2 = PSTR(MSG_FILAMENTLOAD " " MSG_E3);
|
||||
if (thermalManager.targetTooColdToExtrude(2))
|
||||
MENU_ITEM_P(submenu, msg2, lcd_temp_menu_e2_filament_load);
|
||||
else
|
||||
MENU_ITEM_P(gcode, msg2, PSTR("M701 T2"));
|
||||
#if E_STEPPERS > 3
|
||||
PGM_P msg3 = PSTR(MSG_FILAMENTLOAD " " MSG_E4);
|
||||
if (thermalManager.targetTooColdToExtrude(3))
|
||||
MENU_ITEM_P(submenu, msg3, lcd_temp_menu_e3_filament_load);
|
||||
else
|
||||
MENU_ITEM_P(gcode, msg3, PSTR("M701 T3"));
|
||||
#if E_STEPPERS > 4
|
||||
PGM_P msg4 = PSTR(MSG_FILAMENTLOAD " " MSG_E5);
|
||||
if (thermalManager.targetTooColdToExtrude(4))
|
||||
MENU_ITEM_P(submenu, msg4, lcd_temp_menu_e4_filament_load);
|
||||
else
|
||||
MENU_ITEM_P(gcode, msg4, PSTR("M701 T4"));
|
||||
#endif // E_STEPPERS > 4
|
||||
#endif // E_STEPPERS > 3
|
||||
#endif // E_STEPPERS > 2
|
||||
#endif // E_STEPPERS == 1
|
||||
|
||||
// Unload filament
|
||||
#if E_STEPPERS == 1
|
||||
if (!thermalManager.targetTooColdToExtrude(active_extruder))
|
||||
MENU_ITEM(gcode, MSG_FILAMENTUNLOAD, PSTR("M702"));
|
||||
else
|
||||
MENU_ITEM(submenu, MSG_FILAMENTUNLOAD, lcd_temp_menu_e0_filament_unload);
|
||||
#else
|
||||
#if ENABLED(FILAMENT_UNLOAD_ALL_EXTRUDERS)
|
||||
if (!thermalManager.targetTooColdToExtrude(0)
|
||||
#if E_STEPPERS > 1
|
||||
&& !thermalManager.targetTooColdToExtrude(1)
|
||||
#if E_STEPPERS > 2
|
||||
&& !thermalManager.targetTooColdToExtrude(2)
|
||||
#if E_STEPPERS > 3
|
||||
&& !thermalManager.targetTooColdToExtrude(3)
|
||||
#if E_STEPPERS > 4
|
||||
&& !thermalManager.targetTooColdToExtrude(4)
|
||||
#endif // E_STEPPERS > 4
|
||||
#endif // E_STEPPERS > 3
|
||||
#endif // E_STEPPERS > 2
|
||||
#endif // E_STEPPERS > 1
|
||||
)
|
||||
MENU_ITEM(gcode, MSG_FILAMENTUNLOAD_ALL, PSTR("M702"));
|
||||
else
|
||||
MENU_ITEM(submenu, MSG_FILAMENTUNLOAD_ALL, lcd_unload_filament_all_temp_menu);
|
||||
#endif
|
||||
if (!thermalManager.targetTooColdToExtrude(0))
|
||||
MENU_ITEM(gcode, MSG_FILAMENTUNLOAD " " MSG_E1, PSTR("M702 T0"));
|
||||
else
|
||||
MENU_ITEM(submenu, MSG_FILAMENTUNLOAD " " MSG_E1, lcd_temp_menu_e0_filament_unload);
|
||||
if (!thermalManager.targetTooColdToExtrude(1))
|
||||
MENU_ITEM(gcode, MSG_FILAMENTUNLOAD " " MSG_E2, PSTR("M702 T1"));
|
||||
else
|
||||
MENU_ITEM(submenu, MSG_FILAMENTUNLOAD " " MSG_E2, lcd_temp_menu_e1_filament_unload);
|
||||
#if E_STEPPERS > 2
|
||||
if (!thermalManager.targetTooColdToExtrude(2))
|
||||
MENU_ITEM(gcode, MSG_FILAMENTUNLOAD " " MSG_E3, PSTR("M702 T2"));
|
||||
else
|
||||
MENU_ITEM(submenu, MSG_FILAMENTUNLOAD " " MSG_E3, lcd_temp_menu_e2_filament_unload);
|
||||
#if E_STEPPERS > 3
|
||||
if (!thermalManager.targetTooColdToExtrude(3))
|
||||
MENU_ITEM(gcode, MSG_FILAMENTUNLOAD " " MSG_E4, PSTR("M702 T3"));
|
||||
else
|
||||
MENU_ITEM(submenu, MSG_FILAMENTUNLOAD " " MSG_E4, lcd_temp_menu_e3_filament_unload);
|
||||
#if E_STEPPERS > 4
|
||||
if (!thermalManager.targetTooColdToExtrude(4))
|
||||
MENU_ITEM(gcode, MSG_FILAMENTUNLOAD " " MSG_E5, PSTR("M702 T4"));
|
||||
else
|
||||
MENU_ITEM(submenu, MSG_FILAMENTUNLOAD " " MSG_E5, lcd_temp_menu_e4_filament_unload);
|
||||
#endif // E_STEPPERS > 4
|
||||
#endif // E_STEPPERS > 3
|
||||
#endif // E_STEPPERS > 2
|
||||
#endif // E_STEPPERS == 1
|
||||
}
|
||||
#endif
|
||||
|
||||
END_MENU();
|
||||
}
|
||||
#endif
|
||||
|
||||
static AdvancedPauseMode advanced_pause_mode = ADVANCED_PAUSE_MODE_PAUSE_PRINT;
|
||||
static uint8_t hotend_status_extruder = 0;
|
||||
|
||||
static const char* advanced_pause_header() {
|
||||
switch (advanced_pause_mode) {
|
||||
case ADVANCED_PAUSE_MODE_LOAD_FILAMENT:
|
||||
return PSTR(MSG_FILAMENT_CHANGE_HEADER_LOAD);
|
||||
case ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT:
|
||||
return PSTR(MSG_FILAMENT_CHANGE_HEADER_UNLOAD);
|
||||
default: break;
|
||||
}
|
||||
return PSTR(MSG_FILAMENT_CHANGE_HEADER_PAUSE);
|
||||
}
|
||||
|
||||
// Portions from STATIC_ITEM...
|
||||
#define HOTEND_STATUS_ITEM() do { \
|
||||
if (_menuLineNr == _thisItemNr) { \
|
||||
if (lcdDrawUpdate) { \
|
||||
lcd_implementation_drawmenu_static(_lcdLineNr, PSTR(MSG_FILAMENT_CHANGE_NOZZLE), false, true); \
|
||||
lcd_implementation_hotend_status(_lcdLineNr); \
|
||||
lcd_implementation_hotend_status(_lcdLineNr, hotend_status_extruder); \
|
||||
} \
|
||||
if (_skipStatic && encoderLine <= _thisItemNr) { \
|
||||
encoderPosition += ENCODER_STEPS_PER_MENU_ITEM; \
|
||||
@ -4143,18 +4365,6 @@ void kill_screen(const char* lcd_msg) {
|
||||
++_thisItemNr; \
|
||||
}while(0)
|
||||
|
||||
void lcd_advanced_pause_toocold_menu() {
|
||||
START_MENU();
|
||||
STATIC_ITEM(MSG_HEATING_FAILED_LCD, true, true);
|
||||
STATIC_ITEM(MSG_FILAMENT_CHANGE_MINTEMP STRINGIFY(EXTRUDE_MINTEMP) ".", false, false);
|
||||
MENU_BACK(MSG_BACK);
|
||||
#if LCD_HEIGHT > 4
|
||||
STATIC_ITEM(" ");
|
||||
#endif
|
||||
HOTEND_STATUS_ITEM();
|
||||
END_MENU();
|
||||
}
|
||||
|
||||
void lcd_advanced_pause_resume_print() {
|
||||
advanced_pause_menu_response = ADVANCED_PAUSE_RESPONSE_RESUME_PRINT;
|
||||
}
|
||||
@ -4169,13 +4379,13 @@ void kill_screen(const char* lcd_msg) {
|
||||
STATIC_ITEM(MSG_FILAMENT_CHANGE_OPTION_HEADER, true, false);
|
||||
#endif
|
||||
MENU_ITEM(function, MSG_FILAMENT_CHANGE_OPTION_RESUME, lcd_advanced_pause_resume_print);
|
||||
MENU_ITEM(function, MSG_FILAMENT_CHANGE_OPTION_EXTRUDE, lcd_advanced_pause_extrude_more);
|
||||
MENU_ITEM(function, MSG_FILAMENT_CHANGE_OPTION_PURGE, lcd_advanced_pause_extrude_more);
|
||||
END_MENU();
|
||||
}
|
||||
|
||||
void lcd_advanced_pause_init_message() {
|
||||
START_SCREEN();
|
||||
STATIC_ITEM(MSG_FILAMENT_CHANGE_HEADER, true, true);
|
||||
STATIC_ITEM_P(advanced_pause_header(), true, true);
|
||||
STATIC_ITEM(MSG_FILAMENT_CHANGE_INIT_1);
|
||||
#ifdef MSG_FILAMENT_CHANGE_INIT_2
|
||||
STATIC_ITEM(MSG_FILAMENT_CHANGE_INIT_2);
|
||||
@ -4198,7 +4408,7 @@ void kill_screen(const char* lcd_msg) {
|
||||
|
||||
void lcd_advanced_pause_unload_message() {
|
||||
START_SCREEN();
|
||||
STATIC_ITEM(MSG_FILAMENT_CHANGE_HEADER, true, true);
|
||||
STATIC_ITEM_P(advanced_pause_header(), true, true);
|
||||
STATIC_ITEM(MSG_FILAMENT_CHANGE_UNLOAD_1);
|
||||
#ifdef MSG_FILAMENT_CHANGE_UNLOAD_2
|
||||
STATIC_ITEM(MSG_FILAMENT_CHANGE_UNLOAD_2);
|
||||
@ -4221,7 +4431,7 @@ void kill_screen(const char* lcd_msg) {
|
||||
|
||||
void lcd_advanced_pause_wait_for_nozzles_to_heat() {
|
||||
START_SCREEN();
|
||||
STATIC_ITEM(MSG_FILAMENT_CHANGE_HEADER, true, true);
|
||||
STATIC_ITEM_P(advanced_pause_header(), true, true);
|
||||
STATIC_ITEM(MSG_FILAMENT_CHANGE_HEATING_1);
|
||||
#ifdef MSG_FILAMENT_CHANGE_HEATING_2
|
||||
STATIC_ITEM(MSG_FILAMENT_CHANGE_HEATING_2);
|
||||
@ -4238,7 +4448,7 @@ void kill_screen(const char* lcd_msg) {
|
||||
|
||||
void lcd_advanced_pause_heat_nozzle() {
|
||||
START_SCREEN();
|
||||
STATIC_ITEM(MSG_FILAMENT_CHANGE_HEADER, true, true);
|
||||
STATIC_ITEM_P(advanced_pause_header(), true, true);
|
||||
STATIC_ITEM(MSG_FILAMENT_CHANGE_HEAT_1);
|
||||
#ifdef MSG_FILAMENT_CHANGE_INSERT_2
|
||||
STATIC_ITEM(MSG_FILAMENT_CHANGE_HEAT_2);
|
||||
@ -4255,7 +4465,7 @@ void kill_screen(const char* lcd_msg) {
|
||||
|
||||
void lcd_advanced_pause_insert_message() {
|
||||
START_SCREEN();
|
||||
STATIC_ITEM(MSG_FILAMENT_CHANGE_HEADER, true, true);
|
||||
STATIC_ITEM_P(advanced_pause_header(), true, true);
|
||||
STATIC_ITEM(MSG_FILAMENT_CHANGE_INSERT_1);
|
||||
#ifdef MSG_FILAMENT_CHANGE_INSERT_2
|
||||
STATIC_ITEM(MSG_FILAMENT_CHANGE_INSERT_2);
|
||||
@ -4278,7 +4488,7 @@ void kill_screen(const char* lcd_msg) {
|
||||
|
||||
void lcd_advanced_pause_load_message() {
|
||||
START_SCREEN();
|
||||
STATIC_ITEM(MSG_FILAMENT_CHANGE_HEADER, true, true);
|
||||
STATIC_ITEM_P(advanced_pause_header(), true, true);
|
||||
STATIC_ITEM(MSG_FILAMENT_CHANGE_LOAD_1);
|
||||
#ifdef MSG_FILAMENT_CHANGE_LOAD_2
|
||||
STATIC_ITEM(MSG_FILAMENT_CHANGE_LOAD_2);
|
||||
@ -4299,18 +4509,18 @@ void kill_screen(const char* lcd_msg) {
|
||||
END_SCREEN();
|
||||
}
|
||||
|
||||
void lcd_advanced_pause_extrude_message() {
|
||||
void lcd_advanced_pause_purge_message() {
|
||||
START_SCREEN();
|
||||
STATIC_ITEM(MSG_FILAMENT_CHANGE_HEADER, true, true);
|
||||
STATIC_ITEM(MSG_FILAMENT_CHANGE_EXTRUDE_1);
|
||||
#ifdef MSG_FILAMENT_CHANGE_EXTRUDE_2
|
||||
STATIC_ITEM(MSG_FILAMENT_CHANGE_EXTRUDE_2);
|
||||
STATIC_ITEM_P(advanced_pause_header(), true, true);
|
||||
STATIC_ITEM(MSG_FILAMENT_CHANGE_PURGE_1);
|
||||
#ifdef MSG_FILAMENT_CHANGE_PURGE_2
|
||||
STATIC_ITEM(MSG_FILAMENT_CHANGE_PURGE_2);
|
||||
#define __FC_LINES_G 3
|
||||
#else
|
||||
#define __FC_LINES_G 2
|
||||
#endif
|
||||
#ifdef MSG_FILAMENT_CHANGE_EXTRUDE_3
|
||||
STATIC_ITEM(MSG_FILAMENT_CHANGE_EXTRUDE_3);
|
||||
#ifdef MSG_FILAMENT_CHANGE_PURGE_3
|
||||
STATIC_ITEM(MSG_FILAMENT_CHANGE_PURGE_3);
|
||||
#define _FC_LINES_G (__FC_LINES_G + 1)
|
||||
#else
|
||||
#define _FC_LINES_G __FC_LINES_G
|
||||
@ -4324,7 +4534,7 @@ void kill_screen(const char* lcd_msg) {
|
||||
|
||||
void lcd_advanced_pause_resume_message() {
|
||||
START_SCREEN();
|
||||
STATIC_ITEM(MSG_FILAMENT_CHANGE_HEADER, true, true);
|
||||
STATIC_ITEM_P(advanced_pause_header(), true, true);
|
||||
STATIC_ITEM(MSG_FILAMENT_CHANGE_RESUME_1);
|
||||
#ifdef MSG_FILAMENT_CHANGE_RESUME_2
|
||||
STATIC_ITEM(MSG_FILAMENT_CHANGE_RESUME_2);
|
||||
@ -4335,49 +4545,38 @@ void kill_screen(const char* lcd_msg) {
|
||||
END_SCREEN();
|
||||
}
|
||||
|
||||
void lcd_advanced_pause_show_message(const AdvancedPauseMessage message) {
|
||||
FORCE_INLINE screenFunc_t ap_message_screen(const AdvancedPauseMessage message) {
|
||||
switch (message) {
|
||||
case ADVANCED_PAUSE_MESSAGE_INIT:
|
||||
defer_return_to_status = true;
|
||||
lcd_goto_screen(lcd_advanced_pause_init_message);
|
||||
break;
|
||||
case ADVANCED_PAUSE_MESSAGE_UNLOAD:
|
||||
defer_return_to_status = true;
|
||||
lcd_goto_screen(lcd_advanced_pause_unload_message);
|
||||
break;
|
||||
case ADVANCED_PAUSE_MESSAGE_INSERT:
|
||||
defer_return_to_status = true;
|
||||
lcd_goto_screen(lcd_advanced_pause_insert_message);
|
||||
break;
|
||||
case ADVANCED_PAUSE_MESSAGE_LOAD:
|
||||
defer_return_to_status = true;
|
||||
lcd_goto_screen(lcd_advanced_pause_load_message);
|
||||
break;
|
||||
case ADVANCED_PAUSE_MESSAGE_EXTRUDE:
|
||||
defer_return_to_status = true;
|
||||
lcd_goto_screen(lcd_advanced_pause_extrude_message);
|
||||
break;
|
||||
case ADVANCED_PAUSE_MESSAGE_CLICK_TO_HEAT_NOZZLE:
|
||||
defer_return_to_status = true;
|
||||
lcd_goto_screen(lcd_advanced_pause_heat_nozzle);
|
||||
break;
|
||||
case ADVANCED_PAUSE_MESSAGE_WAIT_FOR_NOZZLES_TO_HEAT:
|
||||
defer_return_to_status = true;
|
||||
lcd_goto_screen(lcd_advanced_pause_wait_for_nozzles_to_heat);
|
||||
break;
|
||||
case ADVANCED_PAUSE_MESSAGE_OPTION:
|
||||
defer_return_to_status = true;
|
||||
advanced_pause_menu_response = ADVANCED_PAUSE_RESPONSE_WAIT_FOR;
|
||||
lcd_goto_screen(lcd_advanced_pause_option_menu);
|
||||
break;
|
||||
case ADVANCED_PAUSE_MESSAGE_RESUME:
|
||||
defer_return_to_status = true;
|
||||
lcd_goto_screen(lcd_advanced_pause_resume_message);
|
||||
break;
|
||||
case ADVANCED_PAUSE_MESSAGE_INIT: return lcd_advanced_pause_init_message;
|
||||
case ADVANCED_PAUSE_MESSAGE_UNLOAD: return lcd_advanced_pause_unload_message;
|
||||
case ADVANCED_PAUSE_MESSAGE_INSERT: return lcd_advanced_pause_insert_message;
|
||||
case ADVANCED_PAUSE_MESSAGE_LOAD: return lcd_advanced_pause_load_message;
|
||||
case ADVANCED_PAUSE_MESSAGE_PURGE: return lcd_advanced_pause_purge_message;
|
||||
case ADVANCED_PAUSE_MESSAGE_RESUME: return lcd_advanced_pause_resume_message;
|
||||
case ADVANCED_PAUSE_MESSAGE_CLICK_TO_HEAT_NOZZLE: return lcd_advanced_pause_heat_nozzle;
|
||||
case ADVANCED_PAUSE_MESSAGE_WAIT_FOR_NOZZLES_TO_HEAT: return lcd_advanced_pause_wait_for_nozzles_to_heat;
|
||||
case ADVANCED_PAUSE_MESSAGE_OPTION: advanced_pause_menu_response = ADVANCED_PAUSE_RESPONSE_WAIT_FOR;
|
||||
return lcd_advanced_pause_option_menu;
|
||||
case ADVANCED_PAUSE_MESSAGE_STATUS:
|
||||
lcd_return_to_status();
|
||||
break;
|
||||
default: break;
|
||||
}
|
||||
return NULL;
|
||||
}
|
||||
|
||||
void lcd_advanced_pause_show_message(
|
||||
const AdvancedPauseMessage message,
|
||||
const AdvancedPauseMode mode/*=ADVANCED_PAUSE_MODE_PAUSE_PRINT*/,
|
||||
const uint8_t extruder/*=active_extruder*/
|
||||
) {
|
||||
advanced_pause_mode = mode;
|
||||
hotend_status_extruder = extruder;
|
||||
const screenFunc_t next_screen = ap_message_screen(message);
|
||||
if (next_screen) {
|
||||
defer_return_to_status = true;
|
||||
lcd_goto_screen(next_screen);
|
||||
}
|
||||
else
|
||||
lcd_return_to_status();
|
||||
}
|
||||
|
||||
#endif // ADVANCED_PAUSE_FEATURE
|
||||
@ -4738,7 +4937,7 @@ void lcd_update() {
|
||||
if (UBL_CONDITION && LCD_CLICKED) {
|
||||
if (!wait_for_unclick) { // If not waiting for a debounce release:
|
||||
wait_for_unclick = true; // Set debounce flag to ignore continous clicks
|
||||
lcd_clicked = !wait_for_user && !no_reentry; // Flag the click if allowed
|
||||
lcd_clicked = !wait_for_user && !no_reentry; // Keep the click if not waiting for a user-click
|
||||
wait_for_user = false; // Any click clears wait for user
|
||||
lcd_quick_feedback(); // Always make a click sound
|
||||
}
|
||||
|
||||
@ -29,6 +29,10 @@
|
||||
|
||||
#include "../Marlin.h"
|
||||
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#include "../feature/pause.h"
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(G26_MESH_VALIDATION)
|
||||
extern bool lcd_external_control;
|
||||
#else
|
||||
@ -116,20 +120,11 @@
|
||||
void lcd_completion_feedback(const bool good=true);
|
||||
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
enum AdvancedPauseMessage {
|
||||
ADVANCED_PAUSE_MESSAGE_INIT,
|
||||
ADVANCED_PAUSE_MESSAGE_UNLOAD,
|
||||
ADVANCED_PAUSE_MESSAGE_INSERT,
|
||||
ADVANCED_PAUSE_MESSAGE_LOAD,
|
||||
ADVANCED_PAUSE_MESSAGE_EXTRUDE,
|
||||
ADVANCED_PAUSE_MESSAGE_OPTION,
|
||||
ADVANCED_PAUSE_MESSAGE_RESUME,
|
||||
ADVANCED_PAUSE_MESSAGE_STATUS,
|
||||
ADVANCED_PAUSE_MESSAGE_CLICK_TO_HEAT_NOZZLE,
|
||||
ADVANCED_PAUSE_MESSAGE_WAIT_FOR_NOZZLES_TO_HEAT
|
||||
};
|
||||
void lcd_advanced_pause_show_message(const AdvancedPauseMessage message);
|
||||
#endif
|
||||
extern uint8_t active_extruder;
|
||||
void lcd_advanced_pause_show_message(const AdvancedPauseMessage message,
|
||||
const AdvancedPauseMode mode=ADVANCED_PAUSE_MODE_PAUSE_PRINT,
|
||||
const uint8_t extruder=active_extruder);
|
||||
#endif // ADVANCED_PAUSE_FEATURE
|
||||
|
||||
#if ENABLED(G26_MESH_VALIDATION)
|
||||
void lcd_chirp();
|
||||
|
||||
@ -773,7 +773,7 @@ static void lcd_implementation_status_screen() {
|
||||
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
|
||||
static void lcd_implementation_hotend_status(const uint8_t row) {
|
||||
static void lcd_implementation_hotend_status(const uint8_t row, const uint8_t extruder=active_extruder) {
|
||||
row_y1 = row * row_height + 1;
|
||||
row_y2 = row_y1 + row_height - 1;
|
||||
|
||||
@ -781,13 +781,13 @@ static void lcd_implementation_status_screen() {
|
||||
|
||||
u8g.setPrintPos(LCD_PIXEL_WIDTH - 11 * (DOG_CHAR_WIDTH), row_y2);
|
||||
lcd_print('E');
|
||||
lcd_print((char)('1' + active_extruder));
|
||||
lcd_print((char)('1' + extruder));
|
||||
lcd_print(' ');
|
||||
lcd_print(itostr3(thermalManager.degHotend(active_extruder)));
|
||||
lcd_print(itostr3(thermalManager.degHotend(extruder)));
|
||||
lcd_print('/');
|
||||
|
||||
if (lcd_blink() || !thermalManager.is_heater_idle(active_extruder))
|
||||
lcd_print(itostr3(thermalManager.degTargetHotend(active_extruder)));
|
||||
if (lcd_blink() || !thermalManager.is_heater_idle(extruder))
|
||||
lcd_print(itostr3(thermalManager.degTargetHotend(extruder)));
|
||||
}
|
||||
|
||||
#endif // ADVANCED_PAUSE_FEATURE
|
||||
|
||||
@ -803,7 +803,6 @@ static void lcd_implementation_status_screen() {
|
||||
|
||||
// If the first line has two extruder temps,
|
||||
// show more temperatures on the next line
|
||||
// instead of
|
||||
|
||||
#if HOTENDS > 2 || (HOTENDS > 1 && TEMP_SENSOR_BED)
|
||||
|
||||
@ -954,10 +953,10 @@ static void lcd_implementation_status_screen() {
|
||||
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
|
||||
static void lcd_implementation_hotend_status(const uint8_t row) {
|
||||
static void lcd_implementation_hotend_status(const uint8_t row, const uint8_t extruder=active_extruder) {
|
||||
if (row < LCD_HEIGHT) {
|
||||
lcd.setCursor(LCD_WIDTH - 9, row);
|
||||
_draw_heater_status(active_extruder, LCD_STR_THERMOMETER[0], lcd_blink());
|
||||
_draw_heater_status(extruder, LCD_STR_THERMOMETER[0], lcd_blink());
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
@ -162,7 +162,7 @@
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
|
||||
void Nozzle::park(const uint8_t &z_action, const point_t &park /*= NOZZLE_PARK_POINT*/) {
|
||||
void Nozzle::park(const uint8_t z_action, const point_t &park /*= NOZZLE_PARK_POINT*/) {
|
||||
const float fr_xy = NOZZLE_PARK_XY_FEEDRATE;
|
||||
const float fr_z = NOZZLE_PARK_Z_FEEDRATE;
|
||||
|
||||
|
||||
@ -86,7 +86,7 @@ class Nozzle {
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
|
||||
static void park(const uint8_t &z_action, const point_t &park = NOZZLE_PARK_POINT) _Os;
|
||||
static void park(const uint8_t z_action, const point_t &park=NOZZLE_PARK_POINT) _Os;
|
||||
|
||||
#endif
|
||||
};
|
||||
|
||||
@ -36,13 +36,13 @@
|
||||
*
|
||||
*/
|
||||
|
||||
#define EEPROM_VERSION "V47"
|
||||
#define EEPROM_VERSION "V48"
|
||||
|
||||
// Change EEPROM version if these are changed:
|
||||
#define EEPROM_OFFSET 100
|
||||
|
||||
/**
|
||||
* V47 EEPROM Layout:
|
||||
* V48 EEPROM Layout:
|
||||
*
|
||||
* 100 Version (char x4)
|
||||
* 104 EEPROM CRC16 (uint16_t)
|
||||
@ -139,7 +139,7 @@
|
||||
*
|
||||
* Volumetric Extrusion: 21 bytes
|
||||
* 539 M200 D parser.volumetric_enabled (bool)
|
||||
* 540 M200 T D planner.filament_size (float x5) (T0..3)
|
||||
* 540 M200 T D planner.filament_size (float x5) (T0..4)
|
||||
*
|
||||
* HAS_TRINAMIC: 22 bytes
|
||||
* 560 M906 X Stepper X current (uint16_t)
|
||||
@ -154,7 +154,7 @@
|
||||
* 578 M906 E3 Stepper E3 current (uint16_t)
|
||||
* 580 M906 E4 Stepper E4 current (uint16_t)
|
||||
*
|
||||
* SENSORLESS HOMING 4 bytes
|
||||
* SENSORLESS_HOMING: 4 bytes
|
||||
* 582 M914 X Stepper X and X2 threshold (int16_t)
|
||||
* 584 M914 Y Stepper Y and Y2 threshold (int16_t)
|
||||
*
|
||||
@ -167,7 +167,7 @@
|
||||
* 598 M907 Z Stepper Z current (uint32_t)
|
||||
* 602 M907 E Stepper E current (uint32_t)
|
||||
*
|
||||
* CNC_COORDINATE_SYSTEMS 108 bytes
|
||||
* CNC_COORDINATE_SYSTEMS: 108 bytes
|
||||
* 606 G54-G59.3 coordinate_system (float x 27)
|
||||
*
|
||||
* SKEW_CORRECTION: 12 bytes
|
||||
@ -175,8 +175,12 @@
|
||||
* 718 M852 J planner.xz_skew_factor (float)
|
||||
* 722 M852 K planner.yz_skew_factor (float)
|
||||
*
|
||||
* 726 Minimum end-point
|
||||
* 2255 (726 + 208 + 36 + 9 + 288 + 988) Maximum end-point
|
||||
* ADVANCED_PAUSE_FEATURE: 40 bytes
|
||||
* 726 M603 T U filament_change_unload_length (float x 5) (T0..4)
|
||||
* 746 M603 T L filament_change_load_length (float x 5) (T0..4)
|
||||
*
|
||||
* 766 Minimum end-point
|
||||
* 2295 (766 + 208 + 36 + 9 + 288 + 988) Maximum end-point
|
||||
*
|
||||
* ========================================================================
|
||||
* meshes_begin (between max and min end-point, directly above)
|
||||
@ -698,6 +702,23 @@ void MarlinSettings::postprocess() {
|
||||
for (uint8_t q = 3; q--;) EEPROM_WRITE(dummy);
|
||||
#endif
|
||||
|
||||
//
|
||||
// Advanced Pause filament load & unload lengths
|
||||
//
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
for (uint8_t q = 0; q < MAX_EXTRUDERS; q++) {
|
||||
if (q < COUNT(filament_change_unload_length)) dummy = filament_change_unload_length[q];
|
||||
EEPROM_WRITE(dummy);
|
||||
}
|
||||
for (uint8_t q = 0; q < MAX_EXTRUDERS; q++) {
|
||||
if (q < COUNT(filament_change_load_length)) dummy = filament_change_load_length[q];
|
||||
EEPROM_WRITE(dummy);
|
||||
}
|
||||
#else
|
||||
dummy = 0.0f;
|
||||
for (uint8_t q = MAX_EXTRUDERS * 2; q--;) EEPROM_WRITE(dummy);
|
||||
#endif
|
||||
|
||||
if (!eeprom_error) {
|
||||
#if ENABLED(EEPROM_CHITCHAT)
|
||||
const int eeprom_size = eeprom_index;
|
||||
@ -1183,6 +1204,23 @@ void MarlinSettings::postprocess() {
|
||||
for (uint8_t q = 3; q--;) EEPROM_READ(dummy);
|
||||
#endif
|
||||
|
||||
//
|
||||
// Advanced Pause filament load & unload lengths
|
||||
//
|
||||
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
for (uint8_t q = 0; q < MAX_EXTRUDERS; q++) {
|
||||
EEPROM_READ(dummy);
|
||||
if (q < COUNT(filament_change_unload_length)) filament_change_unload_length[q] = dummy;
|
||||
}
|
||||
for (uint8_t q = 0; q < MAX_EXTRUDERS; q++) {
|
||||
EEPROM_READ(dummy);
|
||||
if (q < COUNT(filament_change_load_length)) filament_change_load_length[q] = dummy;
|
||||
}
|
||||
#else
|
||||
for (uint8_t q = MAX_EXTRUDERS * 2; q--;) EEPROM_READ(dummy);
|
||||
#endif
|
||||
|
||||
if (working_crc == stored_crc) {
|
||||
postprocess();
|
||||
#if ENABLED(EEPROM_CHITCHAT)
|
||||
@ -1593,6 +1631,13 @@ void MarlinSettings::reset() {
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
for (uint8_t e = 0; e < E_STEPPERS; e++) {
|
||||
filament_change_unload_length[e] = FILAMENT_CHANGE_UNLOAD_LENGTH;
|
||||
filament_change_load_length[e] = FILAMENT_CHANGE_LOAD_LENGTH;
|
||||
}
|
||||
#endif
|
||||
|
||||
postprocess();
|
||||
|
||||
#if ENABLED(EEPROM_CHITCHAT)
|
||||
@ -1804,18 +1849,44 @@ void MarlinSettings::reset() {
|
||||
}
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Bed Leveling
|
||||
*/
|
||||
#if HAS_LEVELING
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
if (!forReplay) {
|
||||
CONFIG_ECHO_START;
|
||||
SERIAL_ECHOLNPGM("Mesh Bed Leveling:");
|
||||
}
|
||||
|
||||
#elif ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
|
||||
if (!forReplay) {
|
||||
CONFIG_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" M420 S", leveling_is_valid() ? 1 : 0);
|
||||
ubl.echo_name();
|
||||
SERIAL_ECHOLNPGM(":");
|
||||
}
|
||||
|
||||
#elif HAS_ABL
|
||||
|
||||
if (!forReplay) {
|
||||
CONFIG_ECHO_START;
|
||||
SERIAL_ECHOLNPGM("Auto Bed Leveling:");
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
CONFIG_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" M420 S", planner.leveling_active ? 1 : 0);
|
||||
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
|
||||
SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.z_fade_height));
|
||||
#endif
|
||||
SERIAL_EOL();
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
for (uint8_t py = 0; py < GRID_MAX_POINTS_Y; py++) {
|
||||
for (uint8_t px = 0; px < GRID_MAX_POINTS_X; px++) {
|
||||
CONFIG_ECHO_START;
|
||||
@ -1829,41 +1900,17 @@ void MarlinSettings::reset() {
|
||||
|
||||
#elif ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
|
||||
if (!forReplay) {
|
||||
CONFIG_ECHO_START;
|
||||
ubl.echo_name();
|
||||
SERIAL_ECHOLNPGM(":");
|
||||
}
|
||||
CONFIG_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" M420 S", planner.leveling_active ? 1 : 0);
|
||||
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
|
||||
SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.z_fade_height));
|
||||
#endif
|
||||
SERIAL_EOL();
|
||||
|
||||
if (!forReplay) {
|
||||
SERIAL_EOL();
|
||||
ubl.report_state();
|
||||
|
||||
SERIAL_ECHOLNPAIR("\nActive Mesh Slot: ", ubl.storage_slot);
|
||||
SERIAL_ECHOPAIR("EEPROM can hold ", calc_num_meshes());
|
||||
SERIAL_ECHOLNPGM(" meshes.\n");
|
||||
}
|
||||
|
||||
#elif HAS_ABL
|
||||
|
||||
if (!forReplay) {
|
||||
CONFIG_ECHO_START;
|
||||
SERIAL_ECHOLNPGM("Auto Bed Leveling:");
|
||||
}
|
||||
CONFIG_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" M420 S", planner.leveling_active ? 1 : 0);
|
||||
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
|
||||
SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.z_fade_height));
|
||||
#endif
|
||||
SERIAL_EOL();
|
||||
|
||||
#endif
|
||||
#endif // HAS_LEVELING
|
||||
|
||||
#if ENABLED(DELTA)
|
||||
if (!forReplay) {
|
||||
@ -2045,7 +2092,7 @@ void MarlinSettings::reset() {
|
||||
/**
|
||||
* TMC2130 stepper driver current
|
||||
*/
|
||||
#if ENABLED(HAVE_TMC2130)
|
||||
#if HAS_TRINAMIC
|
||||
if (!forReplay) {
|
||||
CONFIG_ECHO_START;
|
||||
SERIAL_ECHOLNPGM("Stepper driver current:");
|
||||
@ -2091,7 +2138,7 @@ void MarlinSettings::reset() {
|
||||
/**
|
||||
* TMC2130 Sensorless homing thresholds
|
||||
*/
|
||||
#if ENABLED(HAVE_TMC2130) && ENABLED(SENSORLESS_HOMING)
|
||||
#if ENABLED(SENSORLESS_HOMING)
|
||||
if (!forReplay) {
|
||||
CONFIG_ECHO_START;
|
||||
SERIAL_ECHOLNPGM("Sensorless homing threshold:");
|
||||
@ -2137,6 +2184,42 @@ void MarlinSettings::reset() {
|
||||
SERIAL_ECHOPAIR(" E", stepper.motor_current_setting[2]);
|
||||
SERIAL_EOL();
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Advanced Pause filament load & unload lengths
|
||||
*/
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
if (!forReplay) {
|
||||
CONFIG_ECHO_START;
|
||||
SERIAL_ECHOLNPGM("Filament load/unload lengths:");
|
||||
}
|
||||
CONFIG_ECHO_START;
|
||||
#if EXTRUDERS == 1
|
||||
SERIAL_ECHOPAIR(" M603 L", LINEAR_UNIT(filament_change_load_length[0]));
|
||||
SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(filament_change_unload_length[0]));
|
||||
#else
|
||||
SERIAL_ECHOPAIR(" M603 T0 L", LINEAR_UNIT(filament_change_load_length[0]));
|
||||
SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(filament_change_unload_length[0]));
|
||||
CONFIG_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" M603 T1 L", LINEAR_UNIT(filament_change_load_length[1]));
|
||||
SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(filament_change_unload_length[1]));
|
||||
#if EXTRUDERS > 2
|
||||
CONFIG_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" M603 T2 L", LINEAR_UNIT(filament_change_load_length[2]));
|
||||
SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(filament_change_unload_length[2]));
|
||||
#if EXTRUDERS > 3
|
||||
CONFIG_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" M603 T3 L", LINEAR_UNIT(filament_change_load_length[3]));
|
||||
SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(filament_change_unload_length[3]));
|
||||
#if EXTRUDERS > 4
|
||||
CONFIG_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" M603 T4 L", LINEAR_UNIT(filament_change_load_length[4]));
|
||||
SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(filament_change_unload_length[4]));
|
||||
#endif // EXTRUDERS > 4
|
||||
#endif // EXTRUDERS > 3
|
||||
#endif // EXTRUDERS > 2
|
||||
#endif // EXTRUDERS == 1
|
||||
#endif // ADVANCED_PAUSE_FEATURE
|
||||
}
|
||||
|
||||
#endif // !DISABLE_M503
|
||||
|
||||
Loading…
Reference in New Issue
Block a user