Update Z probe offset comment

This commit is contained in:
Scott Lahteine 2019-05-25 19:41:03 -05:00
parent f8bede6b5e
commit 14fe41f6b2
98 changed files with 1470 additions and 1470 deletions

View File

@ -857,23 +857,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -857,23 +857,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -863,23 +863,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 21 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 21 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 61 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 61 // Y offset: -front +behind [the nozzle]

View File

@ -877,23 +877,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle]

View File

@ -857,23 +857,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -868,23 +868,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -857,23 +857,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
//#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] //#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
//#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] //#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -857,23 +857,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
//#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] //#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
//#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] //#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -904,23 +904,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
//#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] //#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
//#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] //#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -870,23 +870,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle]

View File

@ -868,23 +868,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -869,23 +869,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -867,23 +867,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 75 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 75 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 5 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 5 // Y offset: -front +behind [the nozzle]

View File

@ -858,23 +858,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -857,23 +857,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -857,23 +857,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -857,23 +857,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -845,23 +845,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle]

View File

@ -858,23 +858,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 34 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 34 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 15 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 15 // Y offset: -front +behind [the nozzle]

View File

@ -845,23 +845,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle]

View File

@ -856,23 +856,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -867,23 +867,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -857,23 +857,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -858,23 +858,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -876,23 +876,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -867,23 +867,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -861,23 +861,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -861,23 +861,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -867,23 +867,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -866,23 +866,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -839,23 +839,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle]

View File

@ -839,23 +839,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle]

View File

@ -849,23 +849,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -863,23 +863,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 38 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 38 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER -7 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -7 // Y offset: -front +behind [the nozzle]

View File

@ -940,23 +940,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER -22 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER -22 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle]

View File

@ -887,23 +887,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER -3 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER -3 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 31 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 31 // Y offset: -front +behind [the nozzle]

View File

@ -873,23 +873,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER -3 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER -3 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 31 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 31 // Y offset: -front +behind [the nozzle]

View File

@ -841,23 +841,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER -37 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER -37 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle]

View File

@ -841,23 +841,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER -37 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER -37 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle]

View File

@ -872,23 +872,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -850,23 +850,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -864,23 +864,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -877,23 +877,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 4 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 4 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER -44 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -44 // Y offset: -front +behind [the nozzle]

View File

@ -877,23 +877,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -857,23 +857,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -857,23 +857,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -861,23 +861,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -869,23 +869,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -877,23 +877,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -877,23 +877,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
// Set for HoolyHoo's probe mount // Set for HoolyHoo's probe mount

View File

@ -856,23 +856,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -861,23 +861,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle]

View File

@ -861,23 +861,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle]

View File

@ -858,23 +858,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -857,23 +857,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 32 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 32 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 5 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 5 // Y offset: -front +behind [the nozzle]

View File

@ -865,23 +865,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -857,23 +857,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -897,23 +897,23 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -857,23 +857,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle]

View File

@ -855,23 +855,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle]

View File

@ -870,23 +870,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle]

View File

@ -857,23 +857,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -859,23 +859,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle]

View File

@ -857,23 +857,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -859,23 +859,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle]

View File

@ -888,23 +888,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -857,23 +857,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 32 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 32 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 5 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 5 // Y offset: -front +behind [the nozzle]

View File

@ -908,23 +908,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 34 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 34 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 15 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 15 // Y offset: -front +behind [the nozzle]

View File

@ -857,23 +857,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -857,23 +857,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER -32 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER -32 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Y offset: -front +behind [the nozzle]

View File

@ -878,23 +878,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -856,23 +856,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER -45 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER -45 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER -55 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -55 // Y offset: -front +behind [the nozzle]

View File

@ -868,23 +868,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -857,23 +857,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -857,23 +857,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -866,23 +866,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle]

View File

@ -886,23 +886,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -857,23 +857,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -857,23 +857,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -876,23 +876,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -867,23 +867,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]

View File

@ -857,23 +857,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle]

View File

@ -1036,23 +1036,23 @@
#endif // Z_PROBE_ALLEN_KEY #endif // Z_PROBE_ALLEN_KEY
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle]

View File

@ -985,23 +985,23 @@
#endif // Z_PROBE_ALLEN_KEY #endif // Z_PROBE_ALLEN_KEY
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle]

View File

@ -984,23 +984,23 @@
#endif // Z_PROBE_ALLEN_KEY #endif // Z_PROBE_ALLEN_KEY
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle]

View File

@ -984,23 +984,23 @@
#endif // Z_PROBE_ALLEN_KEY #endif // Z_PROBE_ALLEN_KEY
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle]

View File

@ -972,23 +972,23 @@
#endif // Z_PROBE_ALLEN_KEY #endif // Z_PROBE_ALLEN_KEY
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Y offset: -front +behind [the nozzle]

View File

@ -987,23 +987,23 @@
#endif // Z_PROBE_ALLEN_KEY #endif // Z_PROBE_ALLEN_KEY
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle]

View File

@ -972,23 +972,23 @@
#endif // Z_PROBE_ALLEN_KEY #endif // Z_PROBE_ALLEN_KEY
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Y offset: -front +behind [the nozzle]

View File

@ -969,23 +969,23 @@
#endif // Z_PROBE_ALLEN_KEY #endif // Z_PROBE_ALLEN_KEY
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 20 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 20 // Y offset: -front +behind [the nozzle]

View File

@ -972,23 +972,23 @@
#endif // Z_PROBE_ALLEN_KEY #endif // Z_PROBE_ALLEN_KEY
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Y offset: -front +behind [the nozzle]

View File

@ -974,23 +974,23 @@
#endif // Z_PROBE_ALLEN_KEY #endif // Z_PROBE_ALLEN_KEY
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Y offset: -front +behind [the nozzle]

View File

@ -971,23 +971,23 @@
#endif // Z_PROBE_ALLEN_KEY #endif // Z_PROBE_ALLEN_KEY
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER -23 // KosselPro actual: -22.919 #define X_PROBE_OFFSET_FROM_EXTRUDER -23 // KosselPro actual: -22.919
#define Y_PROBE_OFFSET_FROM_EXTRUDER -6 // KosselPro actual: -6.304 #define Y_PROBE_OFFSET_FROM_EXTRUDER -6 // KosselPro actual: -6.304

View File

@ -975,23 +975,23 @@
#endif // Z_PROBE_ALLEN_KEY #endif // Z_PROBE_ALLEN_KEY
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 0.0 // Z probe to nozzle X offset: -left +right #define X_PROBE_OFFSET_FROM_EXTRUDER 0.0 // Z probe to nozzle X offset: -left +right
#define Y_PROBE_OFFSET_FROM_EXTRUDER 0.0 // Z probe to nozzle Y offset: -front +behind #define Y_PROBE_OFFSET_FROM_EXTRUDER 0.0 // Z probe to nozzle Y offset: -front +behind

View File

@ -863,23 +863,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER -17 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER -17 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Y offset: -front +behind [the nozzle]

View File

@ -860,23 +860,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle]

View File

@ -852,23 +852,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle]

View File

@ -862,23 +862,23 @@
// //
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
* X and Y offsets must be integers. * X and Y offsets must be integers.
* *
* In the following example the X and Y offsets are both positive: * In the following example the X and Y offsets are both positive:
* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
* *
* +-- BACK ---+ * +-- BACK ---+
* | | * | |
* L | (+) P | R <-- probe (20,20) * L | (+) P | R <-- probe (20,20)
* E | | I * E | | I
* F | (-) N (+) | G <-- nozzle (10,10) * F | (-) N (+) | G <-- nozzle (10,10)
* T | | H * T | | H
* | (-) | T * | (-) | T
* | | * | |
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]