bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Multi-Volume. Select Media for LVGL (#21344)

Browse Source
This commit is contained in:
Victor Oliveira 2021-04-13 19:34:19 -03:00 committed by GitHub
parent a5f0075a60
commit 138340ee99
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
29 changed files with 546 additions and 279 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
Marlin/Configuration_adv.h
View File

@ -1478,6 +1478,15 @@
// Enable if SD detect is rendered useless (e.g., by using an SD extender) // Enable if SD detect is rendered useless (e.g., by using an SD extender)
//#define NO_SD_DETECT //#define NO_SD_DETECT
// Multiple volume support - EXPERIMENTAL.
//#define MULTI_VOLUME
#if ENABLED(MULTI_VOLUME)
#define VOLUME_SD_ONBOARD
#define VOLUME_USB_FLASH_DRIVE
#define DEFAULT_VOLUME SD_ONBOARD
#define DEFAULT_SHARED_VOLUME USB_FLASH_DRIVE
#endif
#endif // SDSUPPORT #endif // SDSUPPORT
/** /**

18
Marlin/src/HAL/DUE/usb/sd_mmc_spi_mem.cpp
View File

@ -32,7 +32,7 @@ Ctrl_status sd_mmc_spi_test_unit_ready() {
Ctrl_status sd_mmc_spi_read_capacity(uint32_t *nb_sector) { Ctrl_status sd_mmc_spi_read_capacity(uint32_t *nb_sector) {
if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.isMounted()) if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.isMounted())
return CTRL_NO_PRESENT; return CTRL_NO_PRESENT;
*nb_sector = card.getSd2Card().cardSize() - 1; *nb_sector = card.diskIODriver()->cardSize() - 1;
return CTRL_GOOD; return CTRL_GOOD;
} }
@ -74,24 +74,24 @@ Ctrl_status sd_mmc_spi_usb_read_10(uint32_t addr, uint16_t nb_sector) {
#endif #endif
// Start reading // Start reading
if (!card.getSd2Card().readStart(addr)) if (!card.diskIODriver()->readStart(addr))
return CTRL_FAIL; return CTRL_FAIL;
// For each specified sector // For each specified sector
while (nb_sector--) { while (nb_sector--) {
// Read a sector // Read a sector
card.getSd2Card().readData(sector_buf); card.diskIODriver()->readData(sector_buf);
// RAM -> USB // RAM -> USB
if (!udi_msc_trans_block(true, sector_buf, SD_MMC_BLOCK_SIZE, nullptr)) { if (!udi_msc_trans_block(true, sector_buf, SD_MMC_BLOCK_SIZE, nullptr)) {
card.getSd2Card().readStop(); card.diskIODriver()->readStop();
return CTRL_FAIL; return CTRL_FAIL;
} }
} }
// Stop reading // Stop reading
card.getSd2Card().readStop(); card.diskIODriver()->readStop();
// Done // Done
return CTRL_GOOD; return CTRL_GOOD;
@ -113,7 +113,7 @@ Ctrl_status sd_mmc_spi_usb_write_10(uint32_t addr, uint16_t nb_sector) {
} }
#endif #endif
if (!card.getSd2Card().writeStart(addr, nb_sector)) if (!card.diskIODriver()->writeStart(addr, nb_sector))
return CTRL_FAIL; return CTRL_FAIL;
// For each specified sector // For each specified sector
@ -121,16 +121,16 @@ Ctrl_status sd_mmc_spi_usb_write_10(uint32_t addr, uint16_t nb_sector) {
// USB -> RAM // USB -> RAM
if (!udi_msc_trans_block(false, sector_buf, SD_MMC_BLOCK_SIZE, nullptr)) { if (!udi_msc_trans_block(false, sector_buf, SD_MMC_BLOCK_SIZE, nullptr)) {
card.getSd2Card().writeStop(); card.diskIODriver()->writeStop();
return CTRL_FAIL; return CTRL_FAIL;
} }
// Write a sector // Write a sector
card.getSd2Card().writeData(sector_buf); card.diskIODriver()->writeData(sector_buf);
} }
// Stop writing // Stop writing
card.getSd2Card().writeStop(); card.diskIODriver()->writeStop();
// Done // Done
return CTRL_GOOD; return CTRL_GOOD;

38
Marlin/src/HAL/STM32/msc_sd.cpp
View File

@ -30,54 +30,66 @@
class Sd2CardUSBMscHandler : public USBMscHandler { class Sd2CardUSBMscHandler : public USBMscHandler {
public: public:
DiskIODriver* diskIODriver() {
#if ENABLED(MULTI_VOLUME)
#if SHARED_VOLUME_IS(SD_ONBOARD)
return &card.media_sd_spi;
#elif SHARED_VOLUME_IS(USB_FLASH_DRIVE)
return &card.media_usbFlashDrive;
#endif
#else
return diskIODriver();
#endif
}
bool GetCapacity(uint32_t *pBlockNum, uint16_t *pBlockSize) { bool GetCapacity(uint32_t *pBlockNum, uint16_t *pBlockSize) {
*pBlockNum = card.getSd2Card().cardSize(); *pBlockNum = diskIODriver()->cardSize();
*pBlockSize = BLOCK_SIZE; *pBlockSize = BLOCK_SIZE;
return true; return true;
} }
bool Write(uint8_t *pBuf, uint32_t blkAddr, uint16_t blkLen) { bool Write(uint8_t *pBuf, uint32_t blkAddr, uint16_t blkLen) {
auto sd2card = card.getSd2Card(); auto sd2card = diskIODriver();
// single block // single block
if (blkLen == 1) { if (blkLen == 1) {
watchdog_refresh(); watchdog_refresh();
sd2card.writeBlock(blkAddr, pBuf); sd2card->writeBlock(blkAddr, pBuf);
return true; return true;
} }
// multi block optmization // multi block optmization
sd2card.writeStart(blkAddr, blkLen); sd2card->writeStart(blkAddr, blkLen);
while (blkLen--) { while (blkLen--) {
watchdog_refresh(); watchdog_refresh();
sd2card.writeData(pBuf); sd2card->writeData(pBuf);
pBuf += BLOCK_SIZE; pBuf += BLOCK_SIZE;
} }
sd2card.writeStop(); sd2card->writeStop();
return true; return true;
} }
bool Read(uint8_t *pBuf, uint32_t blkAddr, uint16_t blkLen) { bool Read(uint8_t *pBuf, uint32_t blkAddr, uint16_t blkLen) {
auto sd2card = card.getSd2Card(); auto sd2card = diskIODriver();
// single block // single block
if (blkLen == 1) { if (blkLen == 1) {
watchdog_refresh(); watchdog_refresh();
sd2card.readBlock(blkAddr, pBuf); sd2card->readBlock(blkAddr, pBuf);
return true; return true;
} }
// multi block optmization // multi block optmization
sd2card.readStart(blkAddr); sd2card->readStart(blkAddr);
while (blkLen--) { while (blkLen--) {
watchdog_refresh(); watchdog_refresh();
sd2card.readData(pBuf); sd2card->readData(pBuf);
pBuf += BLOCK_SIZE; pBuf += BLOCK_SIZE;
} }
sd2card.readStop(); sd2card->readStop();
return true; return true;
} }
bool IsReady() { bool IsReady() {
return card.isMounted(); return diskIODriver()->isReady();
} }
}; };
@ -105,8 +117,8 @@ USBMscHandler *pSingleMscHandler = &usbMscHandler;
void MSC_SD_init() { void MSC_SD_init() {
USBDevice.end(); USBDevice.end();
delay(200); delay(200);
USBDevice.begin();
USBDevice.registerMscHandlers(1, &pSingleMscHandler, Marlin_STORAGE_Inquirydata); USBDevice.registerMscHandlers(1, &pSingleMscHandler, Marlin_STORAGE_Inquirydata);
USBDevice.begin();
} }
#endif // __STM32F1__ && HAS_SD_HOST_DRIVE #endif // __STM32F1__ && HAS_SD_HOST_DRIVE

2
Marlin/src/MarlinCore.cpp
View File

@ -757,7 +757,7 @@ void idle(TERN_(ADVANCED_PAUSE_FEATURE, bool no_stepper_sleep/*=false*/)) {
TERN_(SDSUPPORT, card.manage_media()); TERN_(SDSUPPORT, card.manage_media());
// Handle USB Flash Drive insert / remove // Handle USB Flash Drive insert / remove
TERN_(USB_FLASH_DRIVE_SUPPORT, Sd2Card::idle()); TERN_(USB_FLASH_DRIVE_SUPPORT, card.diskIODriver()->idle());
// Announce Host Keepalive state (if any) // Announce Host Keepalive state (if any)
TERN_(HOST_KEEPALIVE_FEATURE, gcode.host_keepalive()); TERN_(HOST_KEEPALIVE_FEATURE, gcode.host_keepalive());

9
Marlin/src/inc/Conditionals_post.h
View File

@ -356,6 +356,15 @@
#define SD_DETECT_STATE LOW #define SD_DETECT_STATE LOW
#endif #endif
#endif #endif
#if DISABLED(USB_FLASH_DRIVE_SUPPORT) || BOTH(MULTI_VOLUME, VOLUME_SD_ONBOARD)
#if ENABLED(SDIO_SUPPORT)
#define NEED_SD2CARD_SDIO 1
#else
#define NEED_SD2CARD_SPI 1
#endif
#endif
#endif #endif
#if ANY(HAS_GRAPHICAL_TFT, LCD_USE_DMA_FSMC, HAS_FSMC_GRAPHICAL_TFT, HAS_SPI_GRAPHICAL_TFT) || !PIN_EXISTS(SD_DETECT) #if ANY(HAS_GRAPHICAL_TFT, LCD_USE_DMA_FSMC, HAS_FSMC_GRAPHICAL_TFT, HAS_SPI_GRAPHICAL_TFT) || !PIN_EXISTS(SD_DETECT)

4
Marlin/src/lcd/extui/lib/mks_ui/draw_keyboard.cpp
View File

@ -148,7 +148,7 @@ static void lv_kb_event_cb(lv_obj_t *kb, lv_event_t event) {
public_buf_l[6] = 0x00; public_buf_l[6] = 0x00;
raw_send_to_wifi((uint8_t*)public_buf_l, 6); raw_send_to_wifi((uint8_t*)public_buf_l, 6);
last_disp_state = KEY_BOARD_UI; last_disp_state = KEYBOARD_UI;
lv_clear_keyboard(); lv_clear_keyboard();
wifi_tips_type = TIPS_TYPE_JOINING; wifi_tips_type = TIPS_TYPE_JOINING;
lv_draw_wifi_tips(); lv_draw_wifi_tips();
@ -216,7 +216,7 @@ static void lv_kb_event_cb(lv_obj_t *kb, lv_event_t event) {
} }
void lv_draw_keyboard() { void lv_draw_keyboard() {
scr = lv_screen_create(KEY_BOARD_UI, ""); scr = lv_screen_create(KEYBOARD_UI, "");
// Create styles for the keyboard // Create styles for the keyboard
static lv_style_t rel_style, pr_style; static lv_style_t rel_style, pr_style;

73
Marlin/src/lcd/extui/lib/mks_ui/draw_media_select.cpp Normal file
View File

@ -0,0 +1,73 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../../../../inc/MarlinConfigPre.h"
#if BOTH(HAS_TFT_LVGL_UI, MULTI_VOLUME)
#include "draw_ui.h"
#include <lv_conf.h>
#include "../../../../inc/MarlinConfig.h"
#include "../../../../sd/cardreader.h"
extern lv_group_t *g;
static lv_obj_t *scr;
enum {
ID_T_USB_DISK = 1,
ID_T_SD_DISK,
ID_T_RETURN
};
#if ENABLED(MKS_TEST)
extern uint8_t curent_disp_ui;
#endif
static void event_handler(lv_obj_t *obj, lv_event_t event) {
if (event != LV_EVENT_RELEASED) return;
lv_clear_media_select();
switch (obj->mks_obj_id) {
case ID_T_USB_DISK: card.changeMedia(&card.media_usbFlashDrive); break;
case ID_T_SD_DISK: card.changeMedia(&card.media_sd_spi); break;
case ID_T_RETURN:
TERN_(MKS_TEST, curent_disp_ui = 1);
lv_draw_ready_print();
return;
}
lv_draw_print_file();
}
void lv_draw_media_select() {
scr = lv_screen_create(MEDIA_SELECT_UI);
lv_big_button_create(scr, "F:/bmp_sd.bin", media_select_menu.sd_disk, INTERVAL_V, titleHeight, event_handler, ID_T_SD_DISK);
lv_big_button_create(scr, "F:/bmp_usb_disk.bin", media_select_menu.usb_disk, BTN_X_PIXEL + INTERVAL_V * 2, titleHeight, event_handler, ID_T_USB_DISK);
lv_big_button_create(scr, "F:/bmp_return.bin", common_menu.text_back, BTN_X_PIXEL * 3 + INTERVAL_V * 4, BTN_Y_PIXEL + INTERVAL_H + titleHeight, event_handler, ID_T_RETURN);
}
void lv_clear_media_select() {
#if HAS_ROTARY_ENCODER
if (gCfgItems.encoder_enable) lv_group_remove_all_objs(g);
#endif
lv_obj_del(scr);
}
#endif // HAS_TFT_LVGL_UI

33
Marlin/src/lcd/extui/lib/mks_ui/draw_media_select.h Normal file
View File

@ -0,0 +1,33 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#ifdef __cplusplus
extern "C" { /* C-declarations for C++ */
#endif
extern void lv_draw_media_select();
extern void lv_clear_media_select();
#ifdef __cplusplus
} /* C-declarations for C++ */
#endif

3
Marlin/src/lcd/extui/lib/mks_ui/draw_print_file.cpp
View File

@ -177,7 +177,7 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) {
} }
else { else {
lv_clear_print_file(); lv_clear_print_file();
lv_draw_ready_print(); TERN(MULTI_VOLUME, lv_draw_media_select(), lv_draw_ready_print());
} }
} }
else { else {
@ -248,6 +248,7 @@ static char test_public_buf_l[40];
void disp_gcode_icon(uint8_t file_num) { void disp_gcode_icon(uint8_t file_num) {
uint8_t i; uint8_t i;
// TODO: set current media title?!
scr = lv_screen_create(PRINT_FILE_UI, ""); scr = lv_screen_create(PRINT_FILE_UI, "");
// Create image buttons // Create image buttons

2
Marlin/src/lcd/extui/lib/mks_ui/draw_ready_print.cpp
View File

@ -73,7 +73,7 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) {
case ID_INFO_EXT: uiCfg.curTempType = 0; lv_draw_preHeat(); break; case ID_INFO_EXT: uiCfg.curTempType = 0; lv_draw_preHeat(); break;
case ID_INFO_BED: uiCfg.curTempType = 1; lv_draw_preHeat(); break; case ID_INFO_BED: uiCfg.curTempType = 1; lv_draw_preHeat(); break;
case ID_INFO_FAN: lv_draw_fan(); break; case ID_INFO_FAN: lv_draw_fan(); break;
case ID_PRINT: lv_draw_print_file(); break; case ID_PRINT: TERN(MULTI_VOLUME, lv_draw_media_select(), lv_draw_print_file()); break;
} }
} }

166
Marlin/src/lcd/extui/lib/mks_ui/draw_ui.cpp
View File

@ -447,111 +447,63 @@ char *getDispText(int index) {
ZERO(public_buf_l); ZERO(public_buf_l);
switch (disp_state_stack._disp_state[index]) { switch (disp_state_stack._disp_state[index]) {
case PRINT_READY_UI: case PRINT_READY_UI: strcpy(public_buf_l, main_menu.title); break;
strcpy(public_buf_l, main_menu.title); case PRINT_FILE_UI: strcpy(public_buf_l, file_menu.title); break;
break;
case PRINT_FILE_UI:
strcpy(public_buf_l, file_menu.title);
break;
case PRINTING_UI: case PRINTING_UI:
if (disp_state_stack._disp_state[disp_state_stack._disp_index] == PRINTING_UI switch (disp_state_stack._disp_state[disp_state_stack._disp_index]) {
#ifndef TFT35 IF_DISABLED(TFT35, case OPERATE_UI: case PAUSE_UI:)
|| disp_state_stack._disp_state[disp_state_stack._disp_index] == OPERATE_UI case PRINTING_UI: strcpy(public_buf_l, common_menu.print_special_title); break;
|| disp_state_stack._disp_state[disp_state_stack._disp_index] == PAUSE_UI default: strcpy(public_buf_l, printing_menu.title); break;
#endif }
) strcpy(public_buf_l, common_menu.print_special_title);
else strcpy(public_buf_l, printing_menu.title);
break;
case MOVE_MOTOR_UI:
strcpy(public_buf_l, move_menu.title);
break; break;
case MOVE_MOTOR_UI: strcpy(public_buf_l, move_menu.title); break;
case OPERATE_UI: case OPERATE_UI:
if (disp_state_stack._disp_state[disp_state_stack._disp_index] == PRINTING_UI switch (disp_state_stack._disp_state[disp_state_stack._disp_index]) {
#ifndef TFT35 IF_DISABLED(TFT35, case OPERATE_UI: case PAUSE_UI:)
|| disp_state_stack._disp_state[disp_state_stack._disp_index] == OPERATE_UI case PRINTING_UI: strcpy(public_buf_l, common_menu.operate_special_title); break;
|| disp_state_stack._disp_state[disp_state_stack._disp_index] == PAUSE_UI default: strcpy(public_buf_l, operation_menu.title); break;
#endif }
) strcpy(public_buf_l, common_menu.operate_special_title);
else strcpy(public_buf_l, operation_menu.title);
break; break;
case PAUSE_UI: case PAUSE_UI:
if (disp_state_stack._disp_state[disp_state_stack._disp_index] == PRINTING_UI switch (disp_state_stack._disp_state[disp_state_stack._disp_index]) {
|| disp_state_stack._disp_state[disp_state_stack._disp_index] == OPERATE_UI case OPERATE_UI:
|| disp_state_stack._disp_state[disp_state_stack._disp_index] == PAUSE_UI case PAUSE_UI:
) strcpy(public_buf_l, common_menu.pause_special_title); case PRINTING_UI: strcpy(public_buf_l, common_menu.pause_special_title); break;
else strcpy(public_buf_l, pause_menu.title); default: strcpy(public_buf_l, pause_menu.title); break;
break; }
case EXTRUSION_UI:
strcpy(public_buf_l, extrude_menu.title);
break;
case CHANGE_SPEED_UI:
strcpy(public_buf_l, speed_menu.title);
break;
case FAN_UI:
strcpy(public_buf_l, fan_menu.title);
break; break;
case EXTRUSION_UI: strcpy(public_buf_l, extrude_menu.title); break;
case CHANGE_SPEED_UI: strcpy(public_buf_l, speed_menu.title); break;
case FAN_UI: strcpy(public_buf_l, fan_menu.title); break;
case PRE_HEAT_UI: case PRE_HEAT_UI:
if ((disp_state_stack._disp_state[disp_state_stack._disp_index - 1] == OPERATE_UI)) switch (disp_state_stack._disp_state[disp_state_stack._disp_index]) {
strcpy(public_buf_l, preheat_menu.adjust_title); case OPERATE_UI: strcpy(public_buf_l, preheat_menu.adjust_title);
else strcpy(public_buf_l, preheat_menu.title); default: strcpy(public_buf_l, preheat_menu.title); break;
break; }
case SET_UI:
strcpy(public_buf_l, set_menu.title);
break;
case ZERO_UI:
strcpy(public_buf_l, home_menu.title);
break; break;
case SET_UI: strcpy(public_buf_l, set_menu.title); break;
case ZERO_UI: strcpy(public_buf_l, home_menu.title); break;
case SPRAYER_UI: break; case SPRAYER_UI: break;
case MACHINE_UI: break; case MACHINE_UI: break;
case LANGUAGE_UI: case LANGUAGE_UI: strcpy(public_buf_l, language_menu.title); break;
strcpy(public_buf_l, language_menu.title); case ABOUT_UI: strcpy(public_buf_l, about_menu.title); break;
break;
case ABOUT_UI:
strcpy(public_buf_l, about_menu.title);
break;
case LOG_UI: break; case LOG_UI: break;
case DISK_UI: case DISK_UI: strcpy(public_buf_l, filesys_menu.title); break;
strcpy(public_buf_l, filesys_menu.title); case DIALOG_UI: strcpy(public_buf_l, common_menu.dialog_confirm_title); break;
break; case WIFI_UI: strcpy(public_buf_l, wifi_menu.title); break;
case DIALOG_UI:
strcpy(public_buf_l, common_menu.dialog_confirm_title);
break;
case WIFI_UI:
strcpy(public_buf_l, wifi_menu.title);
break;
case MORE_UI: case MORE_UI:
case PRINT_MORE_UI: case PRINT_MORE_UI: strcpy(public_buf_l, more_menu.title); break;
strcpy(public_buf_l, more_menu.title); case FILAMENTCHANGE_UI: strcpy(public_buf_l, filament_menu.title); break;
break;
case FILAMENTCHANGE_UI:
strcpy(public_buf_l, filament_menu.title);
break;
case LEVELING_UI: case LEVELING_UI:
case MESHLEVELING_UI: case MESHLEVELING_UI: strcpy(public_buf_l, leveling_menu.title); break;
strcpy(public_buf_l, leveling_menu.title); case BIND_UI: strcpy(public_buf_l, cloud_menu.title); break;
break; case TOOL_UI: strcpy(public_buf_l, tool_menu.title); break;
case BIND_UI: case WIFI_LIST_UI: TERN_(MKS_WIFI_MODULE, strcpy(public_buf_l, list_menu.title)); break;
strcpy(public_buf_l, cloud_menu.title); case MACHINE_PARA_UI: strcpy(public_buf_l, MachinePara_menu.title); break;
break; case BABY_STEP_UI: strcpy(public_buf_l, operation_menu.babystep); break;
case TOOL_UI: case EEPROM_SETTINGS_UI: strcpy(public_buf_l, eeprom_menu.title); break;
strcpy(public_buf_l, tool_menu.title); case MEDIA_SELECT_UI: strcpy(public_buf_l, media_select_menu.title); break;
break;
case WIFI_LIST_UI:
#if ENABLED(MKS_WIFI_MODULE)
strcpy(public_buf_l, list_menu.title);
break;
#endif
case MACHINE_PARA_UI:
strcpy(public_buf_l, MachinePara_menu.title);
break;
case BABY_STEP_UI:
strcpy(public_buf_l, operation_menu.babystep);
break;
case EEPROM_SETTINGS_UI:
strcpy(public_buf_l, eeprom_menu.title);
break;
default: break; default: break;
} }
@ -828,11 +780,9 @@ void GUI_RefreshPage() {
} }
break; break;
case OPERATE_UI: case OPERATE_UI: break;
break;
case PAUSE_UI: case PAUSE_UI: break;
break;
case FAN_UI: case FAN_UI:
if (temps_update_flag) { if (temps_update_flag) {
@ -841,8 +791,7 @@ void GUI_RefreshPage() {
} }
break; break;
case MOVE_MOTOR_UI: case MOVE_MOTOR_UI: break;
break;
#if ENABLED(MKS_WIFI_MODULE) #if ENABLED(MKS_WIFI_MODULE)
case WIFI_UI: case WIFI_UI:
@ -852,10 +801,9 @@ void GUI_RefreshPage() {
} }
break; break;
case BIND_UI: case BIND_UI: refresh_bind_ui(); break;
refresh_bind_ui();
break;
#endif #endif
case FILAMENTCHANGE_UI: case FILAMENTCHANGE_UI:
if (temps_update_flag) { if (temps_update_flag) {
temps_update_flag = false; temps_update_flag = false;
@ -866,10 +814,8 @@ void GUI_RefreshPage() {
filament_dialog_handle(); filament_dialog_handle();
TERN_(MKS_WIFI_MODULE, wifi_scan_handle()); TERN_(MKS_WIFI_MODULE, wifi_scan_handle());
break; break;
case MESHLEVELING_UI: case MESHLEVELING_UI: break;
break; case HARDWARE_TEST_UI: break;
case HARDWARE_TEST_UI:
break;
case WIFI_LIST_UI: case WIFI_LIST_UI:
#if ENABLED(MKS_WIFI_MODULE) #if ENABLED(MKS_WIFI_MODULE)
if (printing_rate_update_flag) { if (printing_rate_update_flag) {
@ -878,8 +824,8 @@ void GUI_RefreshPage() {
} }
#endif #endif
break; break;
case KEY_BOARD_UI: case KEYBOARD_UI: break;
break;
#if ENABLED(MKS_WIFI_MODULE) #if ENABLED(MKS_WIFI_MODULE)
case WIFI_TIPS_UI: case WIFI_TIPS_UI:
switch (wifi_tips_type) { switch (wifi_tips_type) {
@ -932,6 +878,7 @@ void GUI_RefreshPage() {
disp_z_offset_value(); disp_z_offset_value();
} }
break; break;
default: break; default: break;
} }
@ -982,7 +929,7 @@ void clear_cur_ui() {
#if ENABLED(MKS_WIFI_MODULE) #if ENABLED(MKS_WIFI_MODULE)
case WIFI_LIST_UI: lv_clear_wifi_list(); break; case WIFI_LIST_UI: lv_clear_wifi_list(); break;
#endif #endif
case KEY_BOARD_UI: lv_clear_keyboard(); break; case KEYBOARD_UI: lv_clear_keyboard(); break;
#if ENABLED(MKS_WIFI_MODULE) #if ENABLED(MKS_WIFI_MODULE)
case WIFI_TIPS_UI: lv_clear_wifi_tips(); break; case WIFI_TIPS_UI: lv_clear_wifi_tips(); break;
#endif #endif
@ -1032,6 +979,9 @@ void clear_cur_ui() {
#if ENABLED(TOUCH_SCREEN_CALIBRATION) #if ENABLED(TOUCH_SCREEN_CALIBRATION)
case TOUCH_CALIBRATION_UI: lv_clear_touch_calibration_screen(); break; case TOUCH_CALIBRATION_UI: lv_clear_touch_calibration_screen(); break;
#endif #endif
#if ENABLED(MULTI_VOLUME)
case MEDIA_SELECT_UI: lv_clear_media_select(); break;
#endif
default: break; default: break;
} }
} }
@ -1087,7 +1037,7 @@ void draw_return_ui() {
#if ENABLED(MKS_WIFI_MODULE) #if ENABLED(MKS_WIFI_MODULE)
case WIFI_LIST_UI: lv_draw_wifi_list(); break; case WIFI_LIST_UI: lv_draw_wifi_list(); break;
#endif #endif
case KEY_BOARD_UI: lv_draw_keyboard(); break; case KEYBOARD_UI: lv_draw_keyboard(); break;
#if ENABLED(MKS_WIFI_MODULE) #if ENABLED(MKS_WIFI_MODULE)
case WIFI_TIPS_UI: lv_draw_wifi_tips(); break; case WIFI_TIPS_UI: lv_draw_wifi_tips(); break;
#endif #endif

4
Marlin/src/lcd/extui/lib/mks_ui/draw_ui.h
View File

@ -76,6 +76,7 @@
#include "draw_homing_sensitivity_settings.h" #include "draw_homing_sensitivity_settings.h"
#include "draw_baby_stepping.h" #include "draw_baby_stepping.h"
#include "draw_keyboard.h" #include "draw_keyboard.h"
#include "draw_media_select.h"
#include "draw_encoder_settings.h" #include "draw_encoder_settings.h"
#include "../../../../inc/MarlinConfigPre.h" #include "../../../../inc/MarlinConfigPre.h"
@ -289,7 +290,7 @@ typedef enum {
TOOL_UI, TOOL_UI,
HARDWARE_TEST_UI, HARDWARE_TEST_UI,
WIFI_LIST_UI, WIFI_LIST_UI,
KEY_BOARD_UI, KEYBOARD_UI,
WIFI_TIPS_UI, WIFI_TIPS_UI,
MACHINE_PARA_UI, MACHINE_PARA_UI,
MACHINE_SETTINGS_UI, MACHINE_SETTINGS_UI,
@ -327,6 +328,7 @@ typedef enum {
ENCODER_SETTINGS_UI, ENCODER_SETTINGS_UI,
TOUCH_CALIBRATION_UI, TOUCH_CALIBRATION_UI,
GCODE_UI, GCODE_UI,
MEDIA_SELECT_UI,
} DISP_STATE; } DISP_STATE;
typedef struct { typedef struct {

7
Marlin/src/lcd/extui/lib/mks_ui/pic_manager.cpp
View File

@ -197,6 +197,13 @@ static const char assets[][LONG_FILENAME_LENGTH] = {
"bmp_cloud.bin", "bmp_cloud.bin",
#endif #endif
#if ENABLED(MULTI_VOLUME)
"bmp_usb_disk.bin",
// "bmp_usb_disk_sel.bin",
"bmp_sd.bin",
// "bmp_sd_sel.bin",
#endif
// Babystep screen // Babystep screen
"bmp_baby_move0_01.bin", "bmp_baby_move0_01.bin",
"bmp_baby_move0_05.bin", "bmp_baby_move0_05.bin",

1
Marlin/src/lcd/extui/lib/mks_ui/tft_Language_en.h
View File

@ -540,6 +540,7 @@
#define USB_DRIVE_BACK_EN "< Back" #define USB_DRIVE_BACK_EN "< Back"
#define FILE_PAGES_EN "%d/%d" #define FILE_PAGES_EN "%d/%d"
#define FILE_NEXT_PAGE_EN "Next Page" #define FILE_NEXT_PAGE_EN "Next Page"
#define MEDIA_SELECT_TITLE_EN "Select Media"
//BUILD PLATE //BUILD PLATE
#define PLATE_TITLE_EN "Build Plate" #define PLATE_TITLE_EN "Build Plate"

5
Marlin/src/lcd/extui/lib/mks_ui/tft_multi_language.cpp
View File

@ -56,6 +56,7 @@ tool_menu_def tool_menu;
MachinePara_menu_def MachinePara_menu; MachinePara_menu_def MachinePara_menu;
pause_msg_def pause_msg_menu; pause_msg_def pause_msg_menu;
eeprom_def eeprom_menu; eeprom_def eeprom_menu;
media_select_menu_def media_select_menu;
machine_common_def machine_menu; machine_common_def machine_menu;
void machine_setting_disp() { void machine_setting_disp() {
@ -821,6 +822,10 @@ void disp_language_init() {
filament_menu.stat_temp = TEXT_VALUE; filament_menu.stat_temp = TEXT_VALUE;
media_select_menu.title = MEDIA_SELECT_TITLE_EN;
media_select_menu.sd_disk = SD_CARD_TITLE_EN;
media_select_menu.usb_disk = USB_DRIVE_TITLE_EN;
machine_menu.key_0 = KEYBOARD_KEY0_EN; machine_menu.key_0 = KEYBOARD_KEY0_EN;
machine_menu.key_1 = KEYBOARD_KEY1_EN; machine_menu.key_1 = KEYBOARD_KEY1_EN;
machine_menu.key_2 = KEYBOARD_KEY2_EN; machine_menu.key_2 = KEYBOARD_KEY2_EN;

8
Marlin/src/lcd/extui/lib/mks_ui/tft_multi_language.h
View File

@ -706,6 +706,14 @@ typedef struct tool_menu_disp {
extern tool_menu_def tool_menu; extern tool_menu_def tool_menu;
typedef struct media_select_menu_disp {
const char *title;
const char *sd_disk;
const char *usb_disk;
} media_select_menu_def;
extern media_select_menu_def media_select_menu;
typedef struct MachinePara_menu_disp { typedef struct MachinePara_menu_disp {
const char *title; const char *title;
const char *MachineSetting; const char *MachineSetting;

2
Marlin/src/lcd/extui/lib/mks_ui/wifi_module.cpp
View File

@ -1142,7 +1142,7 @@ static void wifi_list_msg_handle(uint8_t * msg, uint16_t msgLen) {
int8_t valid_name_num; int8_t valid_name_num;
if (msgLen <= 0) return; if (msgLen <= 0) return;
if (disp_state == KEY_BOARD_UI) return; if (disp_state == KEYBOARD_UI) return;
wifi_list.getNameNum = msg[0]; wifi_list.getNameNum = msg[0];

48
Marlin/src/sd/Sd2Card.cpp
View File

@ -30,7 +30,7 @@
#include "../inc/MarlinConfig.h" #include "../inc/MarlinConfig.h"
#if ENABLED(SDSUPPORT) && NONE(USB_FLASH_DRIVE_SUPPORT, SDIO_SUPPORT) #if NEED_SD2CARD_SPI
/* Enable FAST CRC computations - You can trade speed for FLASH space if /* Enable FAST CRC computations - You can trade speed for FLASH space if
* needed by disabling the following define */ * needed by disabling the following define */
@ -88,7 +88,7 @@
#endif #endif
// Send command and return error code. Return zero for OK // Send command and return error code. Return zero for OK
uint8_t Sd2Card::cardCommand(const uint8_t cmd, const uint32_t arg) { uint8_t DiskIODriver_SPI_SD::cardCommand(const uint8_t cmd, const uint32_t arg) {
// Select card // Select card
chipSelect(); chipSelect();
@ -133,7 +133,7 @@ uint8_t Sd2Card::cardCommand(const uint8_t cmd, const uint32_t arg) {
* \return The number of 512 byte data blocks in the card * \return The number of 512 byte data blocks in the card
* or zero if an error occurs. * or zero if an error occurs.
*/ */
uint32_t Sd2Card::cardSize() { uint32_t DiskIODriver_SPI_SD::cardSize() {
csd_t csd; csd_t csd;
if (!readCSD(&csd)) return 0; if (!readCSD(&csd)) return 0;
if (csd.v1.csd_ver == 0) { if (csd.v1.csd_ver == 0) {
@ -155,12 +155,12 @@ uint32_t Sd2Card::cardSize() {
} }
} }
void Sd2Card::chipDeselect() { void DiskIODriver_SPI_SD::chipDeselect() {
extDigitalWrite(chipSelectPin_, HIGH); extDigitalWrite(chipSelectPin_, HIGH);
spiSend(0xFF); // Ensure MISO goes high impedance spiSend(0xFF); // Ensure MISO goes high impedance
} }
void Sd2Card::chipSelect() { void DiskIODriver_SPI_SD::chipSelect() {
spiInit(spiRate_); spiInit(spiRate_);
extDigitalWrite(chipSelectPin_, LOW); extDigitalWrite(chipSelectPin_, LOW);
} }
@ -178,7 +178,7 @@ void Sd2Card::chipSelect() {
* *
* \return true for success, false for failure. * \return true for success, false for failure.
*/ */
bool Sd2Card::erase(uint32_t firstBlock, uint32_t lastBlock) { bool DiskIODriver_SPI_SD::erase(uint32_t firstBlock, uint32_t lastBlock) {
if (ENABLED(SDCARD_READONLY)) return false; if (ENABLED(SDCARD_READONLY)) return false;
csd_t csd; csd_t csd;
@ -216,7 +216,7 @@ bool Sd2Card::erase(uint32_t firstBlock, uint32_t lastBlock) {
* \return true if single block erase is supported. * \return true if single block erase is supported.
* false if single block erase is not supported. * false if single block erase is not supported.
*/ */
bool Sd2Card::eraseSingleBlockEnable() { bool DiskIODriver_SPI_SD::eraseSingleBlockEnable() {
csd_t csd; csd_t csd;
return readCSD(&csd) ? csd.v1.erase_blk_en : false; return readCSD(&csd) ? csd.v1.erase_blk_en : false;
} }
@ -230,7 +230,7 @@ bool Sd2Card::eraseSingleBlockEnable() {
* \return true for success, false for failure. * \return true for success, false for failure.
* The reason for failure can be determined by calling errorCode() and errorData(). * The reason for failure can be determined by calling errorCode() and errorData().
*/ */
bool Sd2Card::init(const uint8_t sckRateID, const pin_t chipSelectPin) { bool DiskIODriver_SPI_SD::init(const uint8_t sckRateID, const pin_t chipSelectPin) {
#if IS_TEENSY_35_36 || IS_TEENSY_40_41 #if IS_TEENSY_35_36 || IS_TEENSY_40_41
chipSelectPin_ = BUILTIN_SDCARD; chipSelectPin_ = BUILTIN_SDCARD;
const uint8_t ret = SDHC_CardInit(); const uint8_t ret = SDHC_CardInit();
@ -324,10 +324,12 @@ bool Sd2Card::init(const uint8_t sckRateID, const pin_t chipSelectPin) {
} }
chipDeselect(); chipDeselect();
ready = true;
return setSckRate(sckRateID); return setSckRate(sckRateID);
FAIL: FAIL:
chipDeselect(); chipDeselect();
ready = false;
return false; return false;
} }
@ -338,7 +340,7 @@ bool Sd2Card::init(const uint8_t sckRateID, const pin_t chipSelectPin) {
* \param[out] dst Pointer to the location that will receive the data. * \param[out] dst Pointer to the location that will receive the data.
* \return true for success, false for failure. * \return true for success, false for failure.
*/ */
bool Sd2Card::readBlock(uint32_t blockNumber, uint8_t *dst) { bool DiskIODriver_SPI_SD::readBlock(uint32_t blockNumber, uint8_t *dst) {
#if IS_TEENSY_35_36 || IS_TEENSY_40_41 #if IS_TEENSY_35_36 || IS_TEENSY_40_41
return 0 == SDHC_CardReadBlock(dst, blockNumber); return 0 == SDHC_CardReadBlock(dst, blockNumber);
#endif #endif
@ -378,7 +380,7 @@ bool Sd2Card::readBlock(uint32_t blockNumber, uint8_t *dst) {
* *
* \return true for success, false for failure. * \return true for success, false for failure.
*/ */
bool Sd2Card::readData(uint8_t *dst) { bool DiskIODriver_SPI_SD::readData(uint8_t *dst) {
chipSelect(); chipSelect();
return readData(dst, 512); return readData(dst, 512);
} }
@ -445,7 +447,7 @@ bool Sd2Card::readData(uint8_t *dst) {
#endif #endif
#endif // SD_CHECK_AND_RETRY #endif // SD_CHECK_AND_RETRY
bool Sd2Card::readData(uint8_t *dst, const uint16_t count) { bool DiskIODriver_SPI_SD::readData(uint8_t *dst, const uint16_t count) {
bool success = false; bool success = false;
const millis_t read_timeout = millis() + SD_READ_TIMEOUT; const millis_t read_timeout = millis() + SD_READ_TIMEOUT;
@ -477,7 +479,7 @@ bool Sd2Card::readData(uint8_t *dst, const uint16_t count) {
} }
/** read CID or CSR register */ /** read CID or CSR register */
bool Sd2Card::readRegister(const uint8_t cmd, void *buf) { bool DiskIODriver_SPI_SD::readRegister(const uint8_t cmd, void *buf) {
uint8_t *dst = reinterpret_cast<uint8_t*>(buf); uint8_t *dst = reinterpret_cast<uint8_t*>(buf);
if (cardCommand(cmd, 0)) { if (cardCommand(cmd, 0)) {
error(SD_CARD_ERROR_READ_REG); error(SD_CARD_ERROR_READ_REG);
@ -497,7 +499,7 @@ bool Sd2Card::readRegister(const uint8_t cmd, void *buf) {
* *
* \return true for success, false for failure. * \return true for success, false for failure.
*/ */
bool Sd2Card::readStart(uint32_t blockNumber) { bool DiskIODriver_SPI_SD::readStart(uint32_t blockNumber) {
if (type() != SD_CARD_TYPE_SDHC) blockNumber <<= 9; if (type() != SD_CARD_TYPE_SDHC) blockNumber <<= 9;
const bool success = !cardCommand(CMD18, blockNumber); const bool success = !cardCommand(CMD18, blockNumber);
@ -511,7 +513,7 @@ bool Sd2Card::readStart(uint32_t blockNumber) {
* *
* \return true for success, false for failure. * \return true for success, false for failure.
*/ */
bool Sd2Card::readStop() { bool DiskIODriver_SPI_SD::readStop() {
chipSelect(); chipSelect();
const bool success = !cardCommand(CMD12, 0); const bool success = !cardCommand(CMD12, 0);
if (!success) error(SD_CARD_ERROR_CMD12); if (!success) error(SD_CARD_ERROR_CMD12);
@ -531,7 +533,7 @@ bool Sd2Card::readStop() {
* \return The value one, true, is returned for success and the value zero, * \return The value one, true, is returned for success and the value zero,
* false, is returned for an invalid value of \a sckRateID. * false, is returned for an invalid value of \a sckRateID.
*/ */
bool Sd2Card::setSckRate(const uint8_t sckRateID) { bool DiskIODriver_SPI_SD::setSckRate(const uint8_t sckRateID) {
const bool success = (sckRateID <= 6); const bool success = (sckRateID <= 6);
if (success) spiRate_ = sckRateID; else error(SD_CARD_ERROR_SCK_RATE); if (success) spiRate_ = sckRateID; else error(SD_CARD_ERROR_SCK_RATE);
return success; return success;
@ -542,12 +544,14 @@ bool Sd2Card::setSckRate(const uint8_t sckRateID) {
* \param[in] timeout_ms Timeout to abort. * \param[in] timeout_ms Timeout to abort.
* \return true for success, false for timeout. * \return true for success, false for timeout.
*/ */
bool Sd2Card::waitNotBusy(const millis_t timeout_ms) { bool DiskIODriver_SPI_SD::waitNotBusy(const millis_t timeout_ms) {
const millis_t wait_timeout = millis() + timeout_ms; const millis_t wait_timeout = millis() + timeout_ms;
while (spiRec() != 0xFF) if (ELAPSED(millis(), wait_timeout)) return false; while (spiRec() != 0xFF) if (ELAPSED(millis(), wait_timeout)) return false;
return true; return true;
} }
void DiskIODriver_SPI_SD::error(const uint8_t code) { errorCode_ = code; }
/** /**
* Write a 512 byte block to an SD card. * Write a 512 byte block to an SD card.
* *
@ -555,7 +559,7 @@ bool Sd2Card::waitNotBusy(const millis_t timeout_ms) {
* \param[in] src Pointer to the location of the data to be written. * \param[in] src Pointer to the location of the data to be written.
* \return true for success, false for failure. * \return true for success, false for failure.
*/ */
bool Sd2Card::writeBlock(uint32_t blockNumber, const uint8_t *src) { bool DiskIODriver_SPI_SD::writeBlock(uint32_t blockNumber, const uint8_t *src) {
if (ENABLED(SDCARD_READONLY)) return false; if (ENABLED(SDCARD_READONLY)) return false;
#if IS_TEENSY_35_36 || IS_TEENSY_40_41 #if IS_TEENSY_35_36 || IS_TEENSY_40_41
@ -586,7 +590,7 @@ bool Sd2Card::writeBlock(uint32_t blockNumber, const uint8_t *src) {
* \param[in] src Pointer to the location of the data to be written. * \param[in] src Pointer to the location of the data to be written.
* \return true for success, false for failure. * \return true for success, false for failure.
*/ */
bool Sd2Card::writeData(const uint8_t *src) { bool DiskIODriver_SPI_SD::writeData(const uint8_t *src) {
if (ENABLED(SDCARD_READONLY)) return false; if (ENABLED(SDCARD_READONLY)) return false;
bool success = true; bool success = true;
@ -601,7 +605,7 @@ bool Sd2Card::writeData(const uint8_t *src) {
} }
// Send one block of data for write block or write multiple blocks // Send one block of data for write block or write multiple blocks
bool Sd2Card::writeData(const uint8_t token, const uint8_t *src) { bool DiskIODriver_SPI_SD::writeData(const uint8_t token, const uint8_t *src) {
if (ENABLED(SDCARD_READONLY)) return false; if (ENABLED(SDCARD_READONLY)) return false;
const uint16_t crc = TERN(SD_CHECK_AND_RETRY, CRC_CCITT(src, 512), 0xFFFF); const uint16_t crc = TERN(SD_CHECK_AND_RETRY, CRC_CCITT(src, 512), 0xFFFF);
@ -629,7 +633,7 @@ bool Sd2Card::writeData(const uint8_t token, const uint8_t *src) {
* *
* \return true for success, false for failure. * \return true for success, false for failure.
*/ */
bool Sd2Card::writeStart(uint32_t blockNumber, const uint32_t eraseCount) { bool DiskIODriver_SPI_SD::writeStart(uint32_t blockNumber, const uint32_t eraseCount) {
if (ENABLED(SDCARD_READONLY)) return false; if (ENABLED(SDCARD_READONLY)) return false;
bool success = false; bool success = false;
@ -650,7 +654,7 @@ bool Sd2Card::writeStart(uint32_t blockNumber, const uint32_t eraseCount) {
* *
* \return true for success, false for failure. * \return true for success, false for failure.
*/ */
bool Sd2Card::writeStop() { bool DiskIODriver_SPI_SD::writeStop() {
if (ENABLED(SDCARD_READONLY)) return false; if (ENABLED(SDCARD_READONLY)) return false;
bool success = false; bool success = false;
@ -666,4 +670,4 @@ bool Sd2Card::writeStop() {
return success; return success;
} }
#endif // SDSUPPORT #endif // NEED_SD2CARD_SPI

99
Marlin/src/sd/Sd2Card.h
View File

@ -35,42 +35,45 @@
#include "SdFatConfig.h" #include "SdFatConfig.h"
#include "SdInfo.h" #include "SdInfo.h"
#include "disk_io_driver.h"
#include <stdint.h> #include <stdint.h>
uint16_t const SD_INIT_TIMEOUT = 2000, // init timeout ms uint16_t const SD_INIT_TIMEOUT = 2000, // (ms) Init timeout
SD_ERASE_TIMEOUT = 10000, // erase timeout ms SD_ERASE_TIMEOUT = 10000, // (ms) Erase timeout
SD_READ_TIMEOUT = 300, // read timeout ms SD_READ_TIMEOUT = 300, // (ms) Read timeout
SD_WRITE_TIMEOUT = 600; // write time out ms SD_WRITE_TIMEOUT = 600; // (ms) Write timeout
// SD card errors // SD card errors
uint8_t const SD_CARD_ERROR_CMD0 = 0x01, // timeout error for command CMD0 (initialize card in SPI mode) typedef enum : uint8_t {
SD_CARD_ERROR_CMD0 = 0x01, // Timeout error for command CMD0 (initialize card in SPI mode)
SD_CARD_ERROR_CMD8 = 0x02, // CMD8 was not accepted - not a valid SD card SD_CARD_ERROR_CMD8 = 0x02, // CMD8 was not accepted - not a valid SD card
SD_CARD_ERROR_CMD12 = 0x03, // card returned an error response for CMD12 (write stop) SD_CARD_ERROR_CMD12 = 0x03, // Card returned an error response for CMD12 (write stop)
SD_CARD_ERROR_CMD17 = 0x04, // card returned an error response for CMD17 (read block) SD_CARD_ERROR_CMD17 = 0x04, // Card returned an error response for CMD17 (read block)
SD_CARD_ERROR_CMD18 = 0x05, // card returned an error response for CMD18 (read multiple block) SD_CARD_ERROR_CMD18 = 0x05, // Card returned an error response for CMD18 (read multiple block)
SD_CARD_ERROR_CMD24 = 0x06, // card returned an error response for CMD24 (write block) SD_CARD_ERROR_CMD24 = 0x06, // Card returned an error response for CMD24 (write block)
SD_CARD_ERROR_CMD25 = 0x07, // WRITE_MULTIPLE_BLOCKS command failed SD_CARD_ERROR_CMD25 = 0x07, // WRITE_MULTIPLE_BLOCKS command failed
SD_CARD_ERROR_CMD58 = 0x08, // card returned an error response for CMD58 (read OCR) SD_CARD_ERROR_CMD58 = 0x08, // Card returned an error response for CMD58 (read OCR)
SD_CARD_ERROR_ACMD23 = 0x09, // SET_WR_BLK_ERASE_COUNT failed SD_CARD_ERROR_ACMD23 = 0x09, // SET_WR_BLK_ERASE_COUNT failed
SD_CARD_ERROR_ACMD41 = 0x0A, // ACMD41 initialization process timeout SD_CARD_ERROR_ACMD41 = 0x0A, // ACMD41 initialization process timeout
SD_CARD_ERROR_BAD_CSD = 0x0B, // card returned a bad CSR version field SD_CARD_ERROR_BAD_CSD = 0x0B, // Card returned a bad CSR version field
SD_CARD_ERROR_ERASE = 0x0C, // erase block group command failed SD_CARD_ERROR_ERASE = 0x0C, // Erase block group command failed
SD_CARD_ERROR_ERASE_SINGLE_BLOCK = 0x0D, // card not capable of single block erase SD_CARD_ERROR_ERASE_SINGLE_BLOCK = 0x0D, // Card not capable of single block erase
SD_CARD_ERROR_ERASE_TIMEOUT = 0x0E, // Erase sequence timed out SD_CARD_ERROR_ERASE_TIMEOUT = 0x0E, // Erase sequence timed out
SD_CARD_ERROR_READ = 0x0F, // card returned an error token instead of read data SD_CARD_ERROR_READ = 0x0F, // Card returned an error token instead of read data
SD_CARD_ERROR_READ_REG = 0x10, // read CID or CSD failed SD_CARD_ERROR_READ_REG = 0x10, // Read CID or CSD failed
SD_CARD_ERROR_READ_TIMEOUT = 0x11, // timeout while waiting for start of read data SD_CARD_ERROR_READ_TIMEOUT = 0x11, // Timeout while waiting for start of read data
SD_CARD_ERROR_STOP_TRAN = 0x12, // card did not accept STOP_TRAN_TOKEN SD_CARD_ERROR_STOP_TRAN = 0x12, // Card did not accept STOP_TRAN_TOKEN
SD_CARD_ERROR_WRITE = 0x13, // card returned an error token as a response to a write operation SD_CARD_ERROR_WRITE = 0x13, // Card returned an error token as a response to a write operation
SD_CARD_ERROR_WRITE_BLOCK_ZERO = 0x14, // REMOVE - not used ... attempt to write protected block zero SD_CARD_ERROR_WRITE_BLOCK_ZERO = 0x14, // REMOVE - not used ... attempt to write protected block zero
SD_CARD_ERROR_WRITE_MULTIPLE = 0x15, // card did not go ready for a multiple block write SD_CARD_ERROR_WRITE_MULTIPLE = 0x15, // Card did not go ready for a multiple block write
SD_CARD_ERROR_WRITE_PROGRAMMING = 0x16, // card returned an error to a CMD13 status check after a write SD_CARD_ERROR_WRITE_PROGRAMMING = 0x16, // Card returned an error to a CMD13 status check after a write
SD_CARD_ERROR_WRITE_TIMEOUT = 0x17, // timeout occurred during write programming SD_CARD_ERROR_WRITE_TIMEOUT = 0x17, // Timeout occurred during write programming
SD_CARD_ERROR_SCK_RATE = 0x18, // incorrect rate selected SD_CARD_ERROR_SCK_RATE = 0x18, // Incorrect rate selected
SD_CARD_ERROR_INIT_NOT_CALLED = 0x19, // init() not called SD_CARD_ERROR_INIT_NOT_CALLED = 0x19, // Init() not called
// 0x1A is unused now, it was: card returned an error for CMD59 (CRC_ON_OFF) // 0x1A is unused now, it was: card returned an error for CMD59 (CRC_ON_OFF)
SD_CARD_ERROR_READ_CRC = 0x1B; // invalid read CRC SD_CARD_ERROR_READ_CRC = 0x1B // Invalid read CRC
} sd_error_code_t;
// card types // card types
uint8_t const SD_CARD_TYPE_SD1 = 1, // Standard capacity V1 SD card uint8_t const SD_CARD_TYPE_SD1 = 1, // Standard capacity V1 SD card
@ -93,12 +96,11 @@ uint8_t const SD_CARD_TYPE_SD1 = 1, // Standard capacity V1
* \class Sd2Card * \class Sd2Card
* \brief Raw access to SD and SDHC flash memory cards. * \brief Raw access to SD and SDHC flash memory cards.
*/ */
class Sd2Card { class DiskIODriver_SPI_SD : public DiskIODriver {
public: public:
Sd2Card() : errorCode_(SD_CARD_ERROR_INIT_NOT_CALLED), type_(0) {} DiskIODriver_SPI_SD() : errorCode_(SD_CARD_ERROR_INIT_NOT_CALLED), type_(0) {}
uint32_t cardSize();
bool erase(uint32_t firstBlock, uint32_t lastBlock); bool erase(uint32_t firstBlock, uint32_t lastBlock);
bool eraseSingleBlockEnable(); bool eraseSingleBlockEnable();
@ -106,7 +108,7 @@ public:
* Set SD error code. * Set SD error code.
* \param[in] code value for error code. * \param[in] code value for error code.
*/ */
inline void error(const uint8_t code) { errorCode_ = code; } void error(const uint8_t code);
/** /**
* \return error code for last error. See Sd2Card.h for a list of error codes. * \return error code for last error. See Sd2Card.h for a list of error codes.
@ -122,9 +124,15 @@ public:
* *
* \return true for success or false for failure. * \return true for success or false for failure.
*/ */
bool init(const uint8_t sckRateID, const pin_t chipSelectPin); bool init(const uint8_t sckRateID, const pin_t chipSelectPin) override;
bool readBlock(uint32_t block, uint8_t *dst); bool setSckRate(const uint8_t sckRateID);
/**
* Return the card type: SD V1, SD V2 or SDHC
* \return 0 - SD V1, 1 - SD V2, or 3 - SDHC.
*/
int type() const { return type_; }
/** /**
* Read a card's CID register. The CID contains card identification * Read a card's CID register. The CID contains card identification
@ -145,24 +153,27 @@ public:
* *
* \return true for success or false for failure. * \return true for success or false for failure.
*/ */
inline bool readCSD(csd_t *csd) { return readRegister(CMD9, csd); } inline bool readCSD(csd_t *csd) override { return readRegister(CMD9, csd); }
bool readData(uint8_t *dst); bool readData(uint8_t *dst) override;
bool readStart(uint32_t blockNumber); bool readStart(uint32_t blockNumber) override;
bool readStop(); bool readStop() override;
bool setSckRate(const uint8_t sckRateID);
/** bool writeData(const uint8_t *src) override;
* Return the card type: SD V1, SD V2 or SDHC bool writeStart(const uint32_t blockNumber, const uint32_t eraseCount) override;
* \return 0 - SD V1, 1 - SD V2, or 3 - SDHC. bool writeStop() override;
*/
int type() const {return type_;} bool readBlock(uint32_t block, uint8_t *dst) override;
bool writeBlock(uint32_t blockNumber, const uint8_t *src); bool writeBlock(uint32_t blockNumber, const uint8_t *src) override;
bool writeData(const uint8_t *src);
bool writeStart(uint32_t blockNumber, const uint32_t eraseCount); uint32_t cardSize() override;
bool writeStop();
bool isReady() override { return ready; };
void idle() override {}
private: private:
bool ready = false;
uint8_t chipSelectPin_, uint8_t chipSelectPin_,
errorCode_, errorCode_,
spiRate_, spiRate_,

30
Marlin/src/sd/Sd2Card_sdio.h
View File

@ -23,17 +23,33 @@
#include "../inc/MarlinConfig.h" #include "../inc/MarlinConfig.h"
#if ENABLED(SDIO_SUPPORT) #include "SdInfo.h"
#include "disk_io_driver.h"
bool SDIO_Init(); bool SDIO_Init();
bool SDIO_ReadBlock(uint32_t block, uint8_t *dst); bool SDIO_ReadBlock(uint32_t block, uint8_t *dst);
bool SDIO_WriteBlock(uint32_t block, const uint8_t *src); bool SDIO_WriteBlock(uint32_t block, const uint8_t *src);
class Sd2Card { class DiskIODriver_SDIO : public DiskIODriver {
public: public:
bool init(uint8_t sckRateID = 0, uint8_t chipSelectPin = 0) { return SDIO_Init(); } bool init(const uint8_t sckRateID=0, const pin_t chipSelectPin=0) override { return SDIO_Init(); }
bool readBlock(uint32_t block, uint8_t *dst) { return SDIO_ReadBlock(block, dst); }
bool writeBlock(uint32_t block, const uint8_t *src) { return SDIO_WriteBlock(block, src); }
};
#endif // SDIO_SUPPORT bool readCSD(csd_t *csd) override { return false; }
bool readStart(const uint32_t block) override { return false; }
bool readData(uint8_t *dst) override { return false; }
bool readStop() override { return false; }
bool writeStart(const uint32_t block, const uint32_t) override { return false; }
bool writeData(const uint8_t *src) override { return false; }
bool writeStop() override { return false; }
bool readBlock(uint32_t block, uint8_t *dst) override { return SDIO_ReadBlock(block, dst); }
bool writeBlock(uint32_t block, const uint8_t *src) override { return SDIO_WriteBlock(block, src); }
uint32_t cardSize() override { return 0; }
bool isReady() override { return true; }
void idle() override {}
};

2
Marlin/src/sd/SdFatConfig.h
View File

@ -39,7 +39,7 @@
* *
* Each card requires about 550 bytes of SRAM so use of a Mega is recommended. * Each card requires about 550 bytes of SRAM so use of a Mega is recommended.
*/ */
#define USE_MULTIPLE_CARDS 0 #define USE_MULTIPLE_CARDS 0 //TODO? ENABLED(MULTI_VOLUME)
/** /**
* Call flush for endl if ENDL_CALLS_FLUSH is nonzero * Call flush for endl if ENDL_CALLS_FLUSH is nonzero

6
Marlin/src/sd/SdVolume.cpp
View File

@ -41,10 +41,10 @@
// raw block cache // raw block cache
uint32_t SdVolume::cacheBlockNumber_; // current block number uint32_t SdVolume::cacheBlockNumber_; // current block number
cache_t SdVolume::cacheBuffer_; // 512 byte cache for Sd2Card cache_t SdVolume::cacheBuffer_; // 512 byte cache for Sd2Card
Sd2Card* SdVolume::sdCard_; // pointer to SD card object DiskIODriver *SdVolume::sdCard_; // pointer to SD card object
bool SdVolume::cacheDirty_; // cacheFlush() will write block if true bool SdVolume::cacheDirty_; // cacheFlush() will write block if true
uint32_t SdVolume::cacheMirrorBlock_; // mirror block for second FAT uint32_t SdVolume::cacheMirrorBlock_; // mirror block for second FAT
#endif // USE_MULTIPLE_CARDS #endif
// find a contiguous group of clusters // find a contiguous group of clusters
bool SdVolume::allocContiguous(uint32_t count, uint32_t *curCluster) { bool SdVolume::allocContiguous(uint32_t count, uint32_t *curCluster) {
@ -326,7 +326,7 @@ int32_t SdVolume::freeClusterCount() {
* Reasons for failure include not finding a valid partition, not finding a valid * Reasons for failure include not finding a valid partition, not finding a valid
* FAT file system in the specified partition or an I/O error. * FAT file system in the specified partition or an I/O error.
*/ */
bool SdVolume::init(Sd2Card* dev, uint8_t part) { bool SdVolume::init(DiskIODriver* dev, uint8_t part) {
uint32_t totalBlocks, volumeStartBlock = 0; uint32_t totalBlocks, volumeStartBlock = 0;
fat32_boot_t *fbs; fat32_boot_t *fbs;

23
Marlin/src/sd/SdVolume.h
View File

@ -36,9 +36,11 @@
#if ENABLED(USB_FLASH_DRIVE_SUPPORT) #if ENABLED(USB_FLASH_DRIVE_SUPPORT)
#include "usb_flashdrive/Sd2Card_FlashDrive.h" #include "usb_flashdrive/Sd2Card_FlashDrive.h"
#elif ENABLED(SDIO_SUPPORT) #endif
#if NEED_SD2CARD_SDIO
#include "Sd2Card_sdio.h" #include "Sd2Card_sdio.h"
#else #elif NEED_SD2CARD_SPI
#include "Sd2Card.h" #include "Sd2Card.h"
#endif #endif
@ -47,6 +49,7 @@
//============================================================================== //==============================================================================
// SdVolume class // SdVolume class
/** /**
* \brief Cache for an SD data block * \brief Cache for an SD data block
*/ */
@ -84,14 +87,14 @@ class SdVolume {
* Initialize a FAT volume. Try partition one first then try super * Initialize a FAT volume. Try partition one first then try super
* floppy format. * floppy format.
* *
* \param[in] dev The Sd2Card where the volume is located. * \param[in] dev The DiskIODriver where the volume is located.
* *
* \return true for success, false for failure. * \return true for success, false for failure.
* Reasons for failure include not finding a valid partition, not finding * Reasons for failure include not finding a valid partition, not finding
* a valid FAT file system or an I/O error. * a valid FAT file system or an I/O error.
*/ */
bool init(Sd2Card *dev) { return init(dev, 1) ? true : init(dev, 0); } bool init(DiskIODriver *dev) { return init(dev, 1) || init(dev, 0); }
bool init(Sd2Card *dev, uint8_t part); bool init(DiskIODriver *dev, uint8_t part);
// inline functions that return volume info // inline functions that return volume info
uint8_t blocksPerCluster() const { return blocksPerCluster_; } //> \return The volume's cluster size in blocks. uint8_t blocksPerCluster() const { return blocksPerCluster_; } //> \return The volume's cluster size in blocks.
@ -112,10 +115,10 @@ class SdVolume {
uint32_t rootDirStart() const { return rootDirStart_; } uint32_t rootDirStart() const { return rootDirStart_; }
/** /**
* Sd2Card object for this volume * DiskIODriver object for this volume
* \return pointer to Sd2Card object. * \return pointer to DiskIODriver object.
*/ */
Sd2Card* sdCard() { return sdCard_; } DiskIODriver* sdCard() { return sdCard_; }
/** /**
* Debug access to FAT table * Debug access to FAT table
@ -138,13 +141,13 @@ class SdVolume {
#if USE_MULTIPLE_CARDS #if USE_MULTIPLE_CARDS
cache_t cacheBuffer_; // 512 byte cache for device blocks cache_t cacheBuffer_; // 512 byte cache for device blocks
uint32_t cacheBlockNumber_; // Logical number of block in the cache uint32_t cacheBlockNumber_; // Logical number of block in the cache
Sd2Card *sdCard_; // Sd2Card object for cache DiskIODriver *sdCard_; // DiskIODriver object for cache
bool cacheDirty_; // cacheFlush() will write block if true bool cacheDirty_; // cacheFlush() will write block if true
uint32_t cacheMirrorBlock_; // block number for mirror FAT uint32_t cacheMirrorBlock_; // block number for mirror FAT
#else #else
static cache_t cacheBuffer_; // 512 byte cache for device blocks static cache_t cacheBuffer_; // 512 byte cache for device blocks
static uint32_t cacheBlockNumber_; // Logical number of block in the cache static uint32_t cacheBlockNumber_; // Logical number of block in the cache
static Sd2Card *sdCard_; // Sd2Card object for cache static DiskIODriver *sdCard_; // DiskIODriver object for cache
static bool cacheDirty_; // cacheFlush() will write block if true static bool cacheDirty_; // cacheFlush() will write block if true
static uint32_t cacheMirrorBlock_; // block number for mirror FAT static uint32_t cacheMirrorBlock_; // block number for mirror FAT
#endif #endif

27
Marlin/src/sd/cardreader.cpp
View File

@ -120,7 +120,16 @@ uint8_t CardReader::workDirDepth;
#endif // SDCARD_SORT_ALPHA #endif // SDCARD_SORT_ALPHA
Sd2Card CardReader::sd2card; #if SHARED_VOLUME_IS(USB_FLASH_DRIVE) || ENABLED(USB_FLASH_DRIVE_SUPPORT)
DiskIODriver_USBFlash CardReader::media_usbFlashDrive;
#endif
#if NEED_SD2CARD_SDIO
DiskIODriver_SDIO CardReader::media_sdio;
#elif NEED_SD2CARD_SPI
DiskIODriver_SPI_SD CardReader::media_sd_spi;
#endif
DiskIODriver* CardReader::driver = nullptr;
SdVolume CardReader::volume; SdVolume CardReader::volume;
SdFile CardReader::file; SdFile CardReader::file;
@ -133,6 +142,16 @@ SdFile CardReader::file;
uint32_t CardReader::filesize, CardReader::sdpos; uint32_t CardReader::filesize, CardReader::sdpos;
CardReader::CardReader() { CardReader::CardReader() {
changeMedia(&
#if SHARED_VOLUME_IS(SD_ONBOARD)
media_sd_spi
#elif SHARED_VOLUME_IS(USB_FLASH_DRIVE) || ENABLED(USB_FLASH_DRIVE_SUPPORT)
media_usbFlashDrive
#else
TERN(SDIO_SUPPORT, media_sdio, media_sd_spi)
#endif
);
#if ENABLED(SDCARD_SORT_ALPHA) #if ENABLED(SDCARD_SORT_ALPHA)
sort_count = 0; sort_count = 0;
#if ENABLED(SDSORT_GCODE) #if ENABLED(SDSORT_GCODE)
@ -383,12 +402,12 @@ void CardReader::mount() {
flag.mounted = false; flag.mounted = false;
if (root.isOpen()) root.close(); if (root.isOpen()) root.close();
if (!sd2card.init(SD_SPI_SPEED, SDSS) if (!driver->init(SD_SPI_SPEED, SDSS)
#if defined(LCD_SDSS) && (LCD_SDSS != SDSS) #if defined(LCD_SDSS) && (LCD_SDSS != SDSS)
&& !sd2card.init(SD_SPI_SPEED, LCD_SDSS) && !driver->init(SD_SPI_SPEED, LCD_SDSS)
#endif #endif
) SERIAL_ECHO_MSG(STR_SD_INIT_FAIL); ) SERIAL_ECHO_MSG(STR_SD_INIT_FAIL);
else if (!volume.init(&sd2card)) else if (!volume.init(driver))
SERIAL_ERROR_MSG(STR_SD_VOL_INIT_FAIL); SERIAL_ERROR_MSG(STR_SD_VOL_INIT_FAIL);
else if (!root.openRoot(&volume)) else if (!root.openRoot(&volume))
SERIAL_ERROR_MSG(STR_SD_OPENROOT_FAIL); SERIAL_ERROR_MSG(STR_SD_OPENROOT_FAIL);

43
Marlin/src/sd/cardreader.h
View File

@ -42,6 +42,29 @@ extern const char M23_STR[], M24_STR[];
#define MAXPATHNAMELENGTH (1 + (MAXDIRNAMELENGTH + 1) * (MAX_DIR_DEPTH) + 1 + FILENAME_LENGTH) // "/" + N * ("ADIRNAME/") + "filename.ext" #define MAXPATHNAMELENGTH (1 + (MAXDIRNAMELENGTH + 1) * (MAX_DIR_DEPTH) + 1 + FILENAME_LENGTH) // "/" + N * ("ADIRNAME/") + "filename.ext"
#include "SdFile.h" #include "SdFile.h"
#include "disk_io_driver.h"
#if ENABLED(USB_FLASH_DRIVE_SUPPORT)
#include "usb_flashdrive/Sd2Card_FlashDrive.h"
#endif
#if NEED_SD2CARD_SDIO
#include "Sd2Card_sdio.h"
#elif NEED_SD2CARD_SPI
#include "Sd2Card.h"
#endif
#if ENABLED(MULTI_VOLUME)
#define SV_SD_ONBOARD 1
#define SV_USB_FLASH_DRIVE 2
#define _VOLUME_ID(N) _CAT(SV_, N)
#define SHARED_VOLUME_IS(N) (DEFAULT_SHARED_VOLUME == _VOLUME_ID(N))
#if !SHARED_VOLUME_IS(SD_ONBOARD) && !SHARED_VOLUME_IS(USB_FLASH_DRIVE)
#error "DEFAULT_SHARED_VOLUME must be either SD_ONBOARD or USB_FLASH_DRIVE."
#endif
#else
#define SHARED_VOLUME_IS(...) 0
#endif
typedef struct { typedef struct {
bool saving:1, bool saving:1,
@ -80,6 +103,8 @@ public:
CardReader(); CardReader();
static void changeMedia(DiskIODriver *_driver) { driver = _driver; }
static SdFile getroot() { return root; } static SdFile getroot() { return root; }
static void mount(); static void mount();
@ -171,7 +196,8 @@ public:
static inline int16_t read(void *buf, uint16_t nbyte) { return file.isOpen() ? file.read(buf, nbyte) : -1; } static inline int16_t read(void *buf, uint16_t nbyte) { return file.isOpen() ? file.read(buf, nbyte) : -1; }
static inline int16_t write(void *buf, uint16_t nbyte) { return file.isOpen() ? file.write(buf, nbyte) : -1; } static inline int16_t write(void *buf, uint16_t nbyte) { return file.isOpen() ? file.write(buf, nbyte) : -1; }
static Sd2Card& getSd2Card() { return sd2card; } // TODO: rename to diskIODriver()
static DiskIODriver* diskIODriver() { return driver; }
#if ENABLED(AUTO_REPORT_SD_STATUS) #if ENABLED(AUTO_REPORT_SD_STATUS)
// //
@ -181,6 +207,15 @@ public:
static AutoReporter<AutoReportSD> auto_reporter; static AutoReporter<AutoReportSD> auto_reporter;
#endif #endif
#if SHARED_VOLUME_IS(USB_FLASH_DRIVE) || ENABLED(USB_FLASH_DRIVE_SUPPORT)
static DiskIODriver_USBFlash media_usbFlashDrive;
#endif
#if NEED_SD2CARD_SDIO
static DiskIODriver_SDIO media_sdio;
#elif NEED_SD2CARD_SPI
static DiskIODriver_SPI_SD media_sd_spi;
#endif
private: private:
// //
// Working directory and parents // Working directory and parents
@ -236,7 +271,7 @@ private:
#if ENABLED(SDSORT_DYNAMIC_RAM) #if ENABLED(SDSORT_DYNAMIC_RAM)
static uint8_t *isDir; static uint8_t *isDir;
#elif ENABLED(SDSORT_CACHE_NAMES) || DISABLED(SDSORT_USES_STACK) #elif ENABLED(SDSORT_CACHE_NAMES) || DISABLED(SDSORT_USES_STACK)
static uint8_t isDir[(SDSORT_LIMIT+7)>>3]; static uint8_t isDir[(SDSORT_LIMIT + 7) >> 3];
#endif #endif
#endif #endif
@ -244,7 +279,7 @@ private:
#endif // SDCARD_SORT_ALPHA #endif // SDCARD_SORT_ALPHA
static Sd2Card sd2card; static DiskIODriver *driver;
static SdVolume volume; static SdVolume volume;
static SdFile file; static SdFile file;
@ -275,7 +310,7 @@ private:
}; };
#if ENABLED(USB_FLASH_DRIVE_SUPPORT) #if ENABLED(USB_FLASH_DRIVE_SUPPORT)
#define IS_SD_INSERTED() Sd2Card::isInserted() #define IS_SD_INSERTED() DiskIODriver_USBFlash::isInserted()
#elif PIN_EXISTS(SD_DETECT) #elif PIN_EXISTS(SD_DETECT)
#define IS_SD_INSERTED() (READ(SD_DETECT_PIN) == SD_DETECT_STATE) #define IS_SD_INSERTED() (READ(SD_DETECT_PIN) == SD_DETECT_STATE)
#else #else

67
Marlin/src/sd/disk_io_driver.h Normal file
View File

@ -0,0 +1,67 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include <stdint.h>
/**
* DiskIO Interace
*
* Interface for low level disk io
*/
class DiskIODriver {
public:
/**
* Initialize an SD flash memory card with default clock rate and chip
* select pin. See sd2Card::init(uint8_t sckRateID, uint8_t chipSelectPin).
*
* \return true for success or false for failure.
*/
virtual bool init(const uint8_t sckRateID, const pin_t chipSelectPin) = 0; //TODO: only for SPI
/**
* Read a card's CSD register. The CSD contains Card-Specific Data that
* provides information regarding access to the card's contents.
*
* \param[out] csd pointer to area for returned data.
*
* \return true for success or false for failure.
*/
virtual bool readCSD(csd_t* csd) = 0;
virtual bool readStart(const uint32_t block) = 0;
virtual bool readData(uint8_t* dst) = 0;
virtual bool readStop() = 0;
virtual bool writeStart(const uint32_t block, const uint32_t) = 0;
virtual bool writeData(const uint8_t* src) = 0;
virtual bool writeStop() = 0;
virtual bool readBlock(uint32_t block, uint8_t* dst) = 0;
virtual bool writeBlock(uint32_t blockNumber, const uint8_t* src) = 0;
virtual uint32_t cardSize() = 0;
virtual bool isReady() = 0;
virtual void idle() = 0;
};

18
Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp
View File

@ -121,7 +121,7 @@ static enum {
uint32_t lun0_capacity; uint32_t lun0_capacity;
#endif #endif
bool Sd2Card::usbStartup() { bool DiskIODriver_USBFlash::usbStartup() {
if (state <= DO_STARTUP) { if (state <= DO_STARTUP) {
SERIAL_ECHOPGM("Starting USB host..."); SERIAL_ECHOPGM("Starting USB host...");
if (!UHS_START) { if (!UHS_START) {
@ -147,7 +147,7 @@ bool Sd2Card::usbStartup() {
// the USB library to monitor for such events. This function also takes care // the USB library to monitor for such events. This function also takes care
// of initializing the USB library for the first time. // of initializing the USB library for the first time.
void Sd2Card::idle() { void DiskIODriver_USBFlash::idle() {
usb.Task(); usb.Task();
const uint8_t task_state = usb.getUsbTaskState(); const uint8_t task_state = usb.getUsbTaskState();
@ -258,16 +258,16 @@ void Sd2Card::idle() {
// Marlin calls this function to check whether an USB drive is inserted. // Marlin calls this function to check whether an USB drive is inserted.
// This is equivalent to polling the SD_DETECT when using SD cards. // This is equivalent to polling the SD_DETECT when using SD cards.
bool Sd2Card::isInserted() { bool DiskIODriver_USBFlash::isInserted() {
return state == MEDIA_READY; return state == MEDIA_READY;
} }
bool Sd2Card::isReady() { bool DiskIODriver_USBFlash::isReady() {
return state > DO_STARTUP; return state > DO_STARTUP && usb.getUsbTaskState() == UHS_STATE(RUNNING);
} }
// Marlin calls this to initialize an SD card once it is inserted. // Marlin calls this to initialize an SD card once it is inserted.
bool Sd2Card::init(const uint8_t, const pin_t) { bool DiskIODriver_USBFlash::init(const uint8_t, const pin_t) {
if (!isInserted()) return false; if (!isInserted()) return false;
#if USB_DEBUG >= 1 #if USB_DEBUG >= 1
@ -286,7 +286,7 @@ bool Sd2Card::init(const uint8_t, const pin_t) {
} }
// Returns the capacity of the card in blocks. // Returns the capacity of the card in blocks.
uint32_t Sd2Card::cardSize() { uint32_t DiskIODriver_USBFlash::cardSize() {
if (!isInserted()) return false; if (!isInserted()) return false;
#if USB_DEBUG < 3 #if USB_DEBUG < 3
const uint32_t const uint32_t
@ -295,7 +295,7 @@ uint32_t Sd2Card::cardSize() {
return lun0_capacity; return lun0_capacity;
} }
bool Sd2Card::readBlock(uint32_t block, uint8_t *dst) { bool DiskIODriver_USBFlash::readBlock(uint32_t block, uint8_t *dst) {
if (!isInserted()) return false; if (!isInserted()) return false;
#if USB_DEBUG >= 3 #if USB_DEBUG >= 3
if (block >= lun0_capacity) { if (block >= lun0_capacity) {
@ -309,7 +309,7 @@ bool Sd2Card::readBlock(uint32_t block, uint8_t *dst) {
return bulk.Read(0, block, 512, 1, dst) == 0; return bulk.Read(0, block, 512, 1, dst) == 0;
} }
bool Sd2Card::writeBlock(uint32_t block, const uint8_t *src) { bool DiskIODriver_USBFlash::writeBlock(uint32_t block, const uint8_t *src) {
if (!isInserted()) return false; if (!isInserted()) return false;
#if USB_DEBUG >= 3 #if USB_DEBUG >= 3
if (block >= lun0_capacity) { if (block >= lun0_capacity) {

44
Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.h
View File

@ -27,6 +27,7 @@
*/ */
#include "../SdFatConfig.h" #include "../SdFatConfig.h"
#include "../SdInfo.h" #include "../SdInfo.h"
#include "../disk_io_driver.h"
#if DISABLED(USE_OTG_USB_HOST) #if DISABLED(USE_OTG_USB_HOST)
/** /**
@ -46,7 +47,7 @@
#endif #endif
#endif #endif
class Sd2Card { class DiskIODriver_USBFlash : public DiskIODriver {
private: private:
uint32_t pos; uint32_t pos;
@ -54,25 +55,26 @@ class Sd2Card {
public: public:
static bool usbStartup(); static bool usbStartup();
bool init(const uint8_t sckRateID=0, const pin_t chipSelectPin=TERN(USE_OTG_USB_HOST, 0, SD_CHIP_SELECT_PIN));
static void idle();
inline bool readStart(const uint32_t block) { pos = block; return isReady(); }
inline bool readData(uint8_t *dst) { return readBlock(pos++, dst); }
inline bool readStop() const { return true; }
inline bool writeStart(const uint32_t block, const uint32_t) { pos = block; return isReady(); }
inline bool writeData(uint8_t *src) { return writeBlock(pos++, src); }
inline bool writeStop() const { return true; }
bool readBlock(uint32_t block, uint8_t *dst);
bool writeBlock(uint32_t blockNumber, const uint8_t *src);
bool readCSD(csd_t*) { return true; }
uint32_t cardSize();
static bool isInserted(); static bool isInserted();
bool isReady();
bool init(const uint8_t sckRateID=0, const pin_t chipSelectPin=TERN(USE_OTG_USB_HOST, 0, SD_CHIP_SELECT_PIN)) override;
inline bool readCSD(csd_t*) override { return true; }
inline bool readStart(const uint32_t block) override { pos = block; return isReady(); }
inline bool readData(uint8_t *dst) override { return readBlock(pos++, dst); }
inline bool readStop() override { return true; }
inline bool writeStart(const uint32_t block, const uint32_t) override { pos = block; return isReady(); }
inline bool writeData(const uint8_t *src) override { return writeBlock(pos++, src); }
inline bool writeStop() override { return true; }
bool readBlock(uint32_t block, uint8_t *dst) override;
bool writeBlock(uint32_t blockNumber, const uint8_t *src) override;
uint32_t cardSize() override;
bool isReady() override;
void idle() override;
}; };